Te pongo lo que me pone el router
root@OpenWrt:~# swconfig dev switch0 help
switch0: rtl8366rb(RTL8366RB), ports: 6 (cpu @ 5), vlans: 4096
--switch
Attribute 1 (int): enable_learning (Enable learning, enable aging)
Attribute 2 (int): enable_vlan (Enable VLAN mode)
Attribute 3 (int): enable_vlan4k (Enable VLAN 4K mode)
Attribute 4 (none): reset_mibs (Reset all MIB counters)
Attribute 5 (int): blinkrate (Get/Set LED blinking rate (0 = 43ms, 1 = 8 4ms, 2 = 120ms, 3 = 170ms, 4 = 340ms, 5 = 670ms))
Attribute 6 (int): enable_qos (Enable QOS)
Attribute 7 (none): apply (Activate changes in the hardware)
Attribute 8 (none): reset (Reset the switch)
--vlan
Attribute 1 (string): info (Get vlan information)
Attribute 2 (int): fid (Get/Set vlan FID)
Attribute 3 (ports): ports (VLAN port mapping)
--port
Attribute 1 (none): reset_mib (Reset single port MIB counters)
Attribute 2 (string): mib (Get MIB counters for port)
Attribute 3 (int): led (Get/Set port group (0 - 3) led mode (0 - 15))
Attribute 4 (int): disable (Get/Set port state (enabled or disabled))
Attribute 5 (int): rate_in (Get/Set port ingress (incoming) bandwidth li mit in kbps)
Attribute 6 (int): rate_out (Get/Set port egress (outgoing) bandwidth li mit in kbps)
Attribute 7 (int): pvid (Primary VLAN ID)
Attribute 8 (string): link (Get port link information)