?>/script>'; } ?> [Tutorial] HG553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc. Widgets Magazine

Autor Tema: [Tutorial] HG553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.  (Leído 718784 veces)

0 Usuarios y 1 Visitante están viendo este tema.

sankosme

  • Visitante
Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #360 en: 05-09-2012, 20:51 (Miércoles) »
Hola de nuevo, no la necesito en una subred. He puesto la LAN en rango 1 (192.168.1.101) como en la wifi. Resultado, tengo ping desde el huawei a internet pero desde el pc conectado por ethernet no llego al router wifi principal (192.168.1.1). En la primera página pone:

Este driver  conecta como 'cliente transparente' (en la misma subred del AP principal) sin ningún paquete adicional. Para configurarlo desde LuCi, activamos el wifi, escaneamos, nos unimos a la red, introducimos la clave y listos 

Se supone que debería funcionar no??? se me pasa algo?? o he entendido mal y desde el pc con ese driver no puedo salir a internet??

Salu2


Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4608
Re: Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #361 en: 05-09-2012, 21:28 (Miércoles) »
Tienes configurada la IP del gateway (192.168.1.1) en el apartado LAN ?
Y has desactivado el DHCP en el hg553 ?
Ya de paso deshabilita el cortafuegos.


Enviado desde mi CUBE U30GT-H usando Tapatalk 2


Elnef

  • Visitante
Hoy ha caído en mis manos un Hg553. Lo he actualizado a la 21b oficial y luego lo he instalado la r33074. El resultado es que no me respondía ni al ping 192.168.1.1, ni telnet, ni SSH, ni LuCi. No había forma de conectarse con el router. Como nota en el arranque se encendía la luz de power por lo que en apariencia la instalación había sido correcta.

Tras leer el hilo para ver si a alguien le había pasado lo mismo he visto la r33270 y con esa todo ha ido perfecto a la primera.

Simplemente es un aviso a otros usuarios que les pudiera suceder algo similar.


Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4608
Hoy ha caído en mis manos un Hg553. Lo he actualizado a la 21b oficial y luego lo he instalado la r33074. El resultado es que no me respondía ni al ping 192.168.1.1, ni telnet, ni SSH, ni LuCi. No había forma de conectarse con el router. Como nota en el arranque se encendía la luz de power por lo que en apariencia la instalación había sido correcta.

Tras leer el hilo para ver si a alguien le había pasado lo mismo he visto la r33270 y con esa todo ha ido perfecto a la primera.

Simplemente es un aviso a otros usuarios que les pudiera suceder algo similar.

Está bien que avises  ;)
Lo curioso es que hay otros usuarios con esta compilación que no han tenido problemas ....  ^-^


cimbor

  • Visitante
Hoy ha caído en mis manos un Hg553. Lo he actualizado a la 21b oficial y luego lo he instalado la r33074. El resultado es que no me respondía ni al ping 192.168.1.1, ni telnet, ni SSH, ni LuCi. No había forma de conectarse con el router. Como nota en el arranque se encendía la luz de power por lo que en apariencia la instalación había sido correcta.

Tras leer el hilo para ver si a alguien le había pasado lo mismo he visto la r33270 y con esa todo ha ido perfecto a la primera.

Simplemente es un aviso a otros usuarios que les pudiera suceder algo similar.

A mi algunas veces también me pasa eso siguiendo esos pasos con cualquier version, sobre todo cuando instalo varias veces seguidas tras equivocarme en la configuración y la unica solución es reiniciar el proceso.


elmasvital

  • Visitante
Buenas... existe alguna compilacion con el kernel 3.3.8-1? Para los modules de 3g me los pide. Los instalo forzando pero el kernel avisa de algun fallo cuando conecto el 3g.

Por cierto de donde viene la numeracion rXXXX que poneis en los firm?

No consigo realizar el switch para que deje de reconocer el modem como una unidad cdrom de instalación de drivers a modem. Ni con usb_modeswitch ni con sdparm

Dejo un dmesg
[spoiler][    0.368000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.372000]   Amd/Fujitsu Extended Query version 1.3.
[    0.380000] number of CFI chips: 1
[    0.384000] bcm63xxpart: CFE boot tag found with version 7 and board type HW5                                                               53
[    0.392000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.396000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.404000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ec000                                                               0
[    0.412000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
[    0.420000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
[    0.428000] bcm63xxpart: Spare partition is offset 700004 and length 8dfffc
[    0.432000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.440000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.448000] 0x000000000000-0x000000020000 : "CFE"
[    0.456000] 0x000000020100-0x000000120000 : "kernel"
[    0.460000] mtd: partition "kernel" must either start or end on erase block b                                                               oundary or be smaller than an erase block -- forcing read-only
[    0.476000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.488000] mtd: partition "rootfs" set to be root filesystem
[    0.492000] mtd: partition "rootfs_data" created automatically, ofs=700000, l                                                               en=8E0000
[    0.500000] 0x000000700000-0x000000fe0000 : "rootfs_data"
[    0.512000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.520000] 0x000000020000-0x000000fe0000 : "linux"
[    0.540000] bcm63xx_enet MII bus: probed
[    0.544000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Generic P                                                               HY]
[    0.556000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.564000] Registered led device: HW553:red:lan
[    0.568000] Registered led device: HW553:blue:lan
[    0.568000] Registered led device: HW553:red:adsl
[    0.568000] Registered led device: HW553:blue:adsl
[    0.568000] Registered led device: HW553:red:power
[    0.568000] Registered led device: HW553:blue:power
[    0.572000] Registered led device: HW553:red:wifi
[    0.572000] Registered led device: HW553:red:internetkey
[    0.572000] Registered led device: HW553:blue:internetkey
[    0.572000] TCP cubic registered
[    0.576000] NET: Registered protocol family 17
[    0.584000] 8021q: 802.1Q VLAN Support v1.8
[    0.596000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.604000] Freeing unused kernel memory: 196k freed
[    4.160000] eth1: link forced UP - 100/full - flow control off/off
[    4.400000] roboswitch: Probing device eth0: Failed to enable switch
[    4.408000] roboswitch: Probing device eth1: found a 5325! It's a 5350.
[   10.564000] JFFS2 notice: (371) jffs2_build_xattr_subsystem: complete buildin                                                               g xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 12 of xref (0 dead, 2                                                                orphan) found.
[   11.800000] SCSI subsystem initialized
[   12.048000] usbcore: registered new interface driver usbfs
[   12.052000] usbcore: registered new interface driver hub
[   12.064000] usbcore: registered new device driver usb
[   12.668000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.780000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   12.784000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus                                                                number 1
[   12.820000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   12.836000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurr                                                               ent ignored
[   12.844000] hub 1-0:1.0: USB hub found
[   12.848000] hub 1-0:1.0: 2 ports detected
[   13.008000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.120000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   13.124000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus                                                                number 2
[   13.132000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   13.200000] hub 2-0:1.0: USB hub found
[   13.204000] hub 2-0:1.0: 1 port detected
[   13.372000] uhci_hcd: USB Universal Host Controller Interface driver
[   13.568000] Initializing USB Mass Storage driver...
[   13.572000] usbcore: registered new interface driver usb-storage
[   13.580000] USB Mass Storage support registered.
[   38.000000] Compat-wireless backport release: compat-wireless-2012-07-13
[   38.004000] Backport based on wireless-testing.git master-2012-07-16
[   38.012000] compat.git: wireless-testing.git
[   38.080000] cfg80211: Calling CRDA to update world regulatory domain
[   38.084000] cfg80211: World regulatory domain updated:
[   38.092000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                                               n, max_eirp)
[   38.100000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.108000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.116000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.124000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.132000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.296000] cfg80211: World regulatory domain updated:
[   39.304000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                                               n, max_eirp)
[   39.312000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.320000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.328000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.336000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.344000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.880000] usbcore: registered new interface driver rtl8187
[   39.920000] usbcore: registered new interface driver rt2800usb
[   41.440000] wl: module license 'unspecified' taints kernel.
[   41.444000] Disabling lock debugging due to kernel taint
[   41.548000] SSB/BCMA glue driver successfully attached
[   41.568000] Got version 2 SPROM from SSB
[   41.580000] wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.56.27
[   41.660000] Button Hotplug driver version 0.4.1
[   42.532000] tun: Universal TUN/TAP device driver, 1.6
[   42.536000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   43.088000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.592000] nf_conntrack version 0.5.0 (969 buckets, 3876 max)
[   44.752000] usbcore: registered new interface driver cdc_acm
[   44.756000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD                                                               N adapters
[   44.812000] usbcore: registered new interface driver usblp
[   44.884000] usbcore: registered new interface driver usbserial
[   44.892000] USB Serial support registered for generic
[   44.896000] usbcore: registered new interface driver usbserial_generic
[   44.904000] usbserial: USB Serial Driver core
[   45.136000] USB Serial support registered for GSM modem (1-port)
[   45.144000] usbcore: registered new interface driver option
[   45.148000] option: v0.7.2:USB Driver for GSM modems
[   49.584000] eth1: link forced UP - 100/full - flow control off/off
[   49.592000] device eth1 entered promiscuous mode
[   49.604000] br-lan: port 1(eth1) entered forwarding state
[   49.612000] br-lan: port 1(eth1) entered forwarding state
[   51.616000] br-lan: port 1(eth1) entered forwarding state
[  217.080000] usb 2-1: new full-speed USB device number 2 using bcm63xx_ohci
[  217.256000] scsi0 : usb-storage 2-1:1.0
[  217.264000] usb 2-1: USB disconnect, device number 2
[  217.952000] usb 2-1: new full-speed USB device number 3 using bcm63xx_ohci
[  218.124000] CPU 0 Unable to handle kernel paging request at virtual address 0                                                               0000000, epc == 829b1918, ra == 829b189c
[  218.136000] Oops[#1]:
[  218.136000] Cpu 0
[  218.136000] $ 0   : 00000000 00000069 00000000 829b0000
[  218.136000] $ 4   : 00000000 829c0938 00001001 00001001
[  218.136000] $ 8   : 00000008 80126fa8 00000008 80164f10
[  218.136000] $12   : 00000000 00000000 00000000 00000000
[  218.136000] $16   : 829b583c 829c3800 829fe868 829c390c
[  218.136000] $20   : 83b15080 f7ffffff 829fe800 830383a0
[  218.136000] $24   : 00000018 800477d0
[  218.136000] $28   : 83b68000 83b69ad0 00000004 829b189c
[  218.136000] Hi    : 0000000f
[  218.136000] Lo    : 00000016
[  218.136000] epc   : 829b1918 0x829b1918
[  218.136000]     Tainted: P           O
[  218.136000] ra    : 829b189c 0x829b189c
[  218.136000] Status: 10008403    KERNEL EXL IE
[  218.136000] Cause : 00800008
[  218.136000] BadVA : 00000000
[  218.136000] PrId  : 0002a010 (Broadcom BMIPS4350)
[  218.136000] Modules linked in: option sg gpio_keys_polled usb_wwan usbserial                                                                usblp cdc_acm evdev ledtrig_gpio nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_connt                                                               rack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_conntrack xt_CT xt_NOTRACK iptable                                                               _raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS                                                                ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter i                                                               p_tables xt_tcpudp x_tables tun vfat fat cifs autofs4 button_hotplug(O) wl(PO) w                                                               l_glue(O) rt2800usb(O) rtl8187(O) rt2800lib(O) rt2x00usb(O) rt2x00pci(O) rt2x00l                                                               ib(O) nls_utf8 mac80211(O) crc_itu_t crc_ccitt input_polldev eeprom_93cx6 cfg802                                                               11(O) compat(O) input_core md5 md4 hmac ecb des_generic arc4 aes_generic crypto_                                                               blkcipher cryptomgr aead usb_storage uhci_hcd ohci_hcd ehci_hcd sd_mod ext4 jbd2                                                                mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_hash crypto_algapi sw                                                               itch_adm(O) switch_robo(O) switch_core(O)
[  218.136000] Process khubd (pid: 398, threadinfo=83b68000, task=83ac24c0, tls=                                                               00000000)
[  218.136000] Stack : 00000000 83b69b48 831f1b30 00000000 831cdc70 83b69b98 83a                                                               f6280 00000001
[  218.136000]         829fe868 800e0cac 831cdc70 831f1b30 ffffffef 83b69b98 83a                                                               f6280 00000001
[  218.136000]         829fe868 800e1a8c 831f1b30 8319df00 8319df00 00000008 fff                                                               ffff5 802f0000
[  218.136000]         0000a1ff 800e1448 831f1a90 831f1b30 831f1b30 829ac400 83b                                                               69b98 800e1b00
[  218.136000]         83b69b70 802619e4 fffffffe 831f1b30 00000000 829ac400 831                                                               cdc70 83af6280
[  218.136000]         ...
[  218.136000] Call Trace:[<800e0cac>] 0x800e0cac
[  218.136000] [<800e1a8c>] 0x800e1a8c
[  218.136000] [<800e1448>] 0x800e1448
[  218.136000] [<800e1b00>] 0x800e1b00
[  218.136000] [<800e25cc>] 0x800e25cc
[  218.136000] [<8302bdbc>] 0x8302bdbc
[  218.136000] [<8016295c>] 0x8016295c
[  218.136000] [<80162be8>] 0x80162be8
[  218.136000] [<80162d70>] 0x80162d70
[  218.136000] [<80162d40>] 0x80162d40
[  218.136000] [<801613a8>] 0x801613a8
[  218.136000] [<8011f4ac>] 0x8011f4ac
[  218.136000] [<80162adc>] 0x80162adc
[  218.136000] [<80162194>] 0x80162194
[  218.136000] [<80160798>] 0x80160798
[  218.136000] [<8011e5d8>] 0x8011e5d8
[  218.136000] [<8302aebc>] 0x8302aebc
[  218.136000] [<83032258>] 0x83032258
[  218.136000] [<801cdaf8>] 0x801cdaf8
[  218.136000] [<80162be8>] 0x80162be8
[  218.136000] [<80162d70>] 0x80162d70
[  218.136000] [<80162d40>] 0x80162d40
[  218.136000] [<801613a8>] 0x801613a8
[  218.136000] [<8011f4ac>] 0x8011f4ac
[  218.136000] [<80162adc>] 0x80162adc
[  218.136000] [<80162194>] 0x80162194
[  218.136000] [<80160798>] 0x80160798
[  218.136000] [<8302a038>] 0x8302a038
[  218.136000] [<83023e64>] 0x83023e64
[  218.136000] [<83024978>] 0x83024978
[  218.136000] [<80046b58>] 0x80046b58
[  218.136000] [<8003c520>] 0x8003c520
[  218.136000] [<83023ec4>] 0x83023ec4
[  218.136000] [<8003bdc0>] 0x8003bdc0
[  218.136000] [<800152d0>] 0x800152d0
[  218.136000] [<8003bd38>] 0x8003bd38
[  218.136000] [<800152c0>] 0x800152c0
[  218.136000]
[  218.136000]
[  218.136000] Code: 108303bf  3c03829b  8c420140 <8c430000> 24630001  ac430000                                                                 3c03829b  24645830  0c08f4e6
[  218.500000] ---[ end trace 22a5fc9cdd26965c ]---
root@OpenWrt:/#

[/spoiler]

Y el bootlog por serial sin el 3g pinchado
[spoiler][    0.000000] Linux version 3.3.8 (marco@homer) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #7 Sat Aug 25 18:41:42 CEST 2012
[    0.000000] Detected Broadcom 0x6358 CPU revision a1
[    0.000000] CPU frequency is 300 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 39 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-48.46
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW553
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61848k/65536k available (2244k kernel code, 3688k reserved, 404k data, 196k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x800ffff]
[    0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
[    0.124000] Switching to clocksource MIPS
[    0.136000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.164000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[    0.212000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.220000] NET: Registered protocol family 2
[    0.228000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.236000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.240000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.248000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.256000] TCP reno registered
[    0.260000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.264000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.272000] NET: Registered protocol family 1
[    0.280000] audit: initializing netlink socket (disabled)
[    0.288000] type=2000 audit(0.288:1): initialized
[    0.292000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.300000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.308000] msgmni has been set to 120
[    0.312000] io scheduler noop registered
[    0.316000] io scheduler deadline registered (default)
[    0.324000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.332000] console [ttyS0] enabled, bootconsole disabled
[    0.332000] console [ttyS0] enabled, bootconsole disabled
[    0.352000] physmap platform flash device: 02000000 at 1e000000
[    0.356000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
[    0.368000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.372000]   Amd/Fujitsu Extended Query version 1.3.
[    0.380000] number of CFI chips: 1
[    0.384000] bcm63xxpart: CFE boot tag found with version 7 and board type HW553
[    0.392000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.396000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.404000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ec0000
[    0.412000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
[    0.420000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
[    0.428000] bcm63xxpart: Spare partition is offset 700004 and length 8dfffc
[    0.432000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.440000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.448000] 0x000000000000-0x000000020000 : "CFE"
[    0.456000] 0x000000020100-0x000000120000 : "kernel"
[    0.460000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.476000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.488000] mtd: partition "rootfs" set to be root filesystem
[    0.492000] mtd: partition "rootfs_data" created automatically, ofs=700000, len=8E0000
[    0.500000] 0x000000700000-0x000000fe0000 : "rootfs_data"
[    0.512000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.520000] 0x000000020000-0x000000fe0000 : "linux"
[    0.540000] bcm63xx_enet MII bus: probed
[    0.544000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Generic PHY]
[    0.556000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.572000] TCP cubic registered
[    0.576000] NET: Registered protocol family 17
[    0.584000] 8021q: 802.1Q VLAN Support v1.8
[    0.596000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.604000] Freeing unused kernel memory: 196k freed
awk: /proc/cpuinfo: No such file or directory
[    4.160000] eth1: link forced UP - 100/full - flow control off/off
[    4.400000] roboswitch: Probing device eth0: Failed to enable switch
[    4.408000] roboswitch: Probing device eth1: found a 5325! It's a 5350.
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[   10.564000] JFFS2 notice: (371) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 12 of xref (0 dead, 2 orphan) found.
[   11.800000] SCSI subsystem initialized
[   12.048000] usbcore: registered new interface driver usbfs
[   12.052000] usbcore: registered new interface driver hub
[   12.064000] usbcore: registered new device driver usb
[   12.668000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.780000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   12.784000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   12.820000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   12.836000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   12.844000] hub 1-0:1.0: USB hub found
[   12.848000] hub 1-0:1.0: 2 ports detected
[   13.008000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.120000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   13.124000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   13.132000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   13.200000] hub 2-0:1.0: USB hub found
[   13.204000] hub 2-0:1.0: 1 port detected
[   13.372000] uhci_hcd: USB Universal Host Controller Interface driver
[   13.568000] Initializing USB Mass Storage driver...
[   13.572000] usbcore: registered new interface driver usb-storage
[   13.580000] USB Mass Storage support registered.
switching to jffs2
- init -

Please press Enter to activate this console. [   38.000000] Compat-wireless backport release: compat-wireless-2012-07-13
[   38.004000] Backport based on wireless-testing.git master-2012-07-16
[   38.012000] compat.git: wireless-testing.git
[   38.080000] cfg80211: Calling CRDA to update world regulatory domain
[   38.084000] cfg80211: World regulatory domain updated:
[   38.092000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   38.100000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.108000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.116000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.124000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.132000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.296000] cfg80211: World regulatory domain updated:
[   39.304000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   39.312000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.320000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.328000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.336000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.344000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.880000] usbcore: registered new interface driver rtl8187
[   39.920000] usbcore: registered new interface driver rt2800usb
[   41.440000] wl: module license 'unspecified' taints kernel.
[   41.444000] Disabling lock debugging due to kernel taint
[   41.548000] SSB/BCMA glue driver successfully attached
[   41.568000] Got version 2 SPROM from SSB
[   41.580000] wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.56.27
[   41.660000] Button Hotplug driver version 0.4.1
[   42.532000] tun: Universal TUN/TAP device driver, 1.6
[   42.536000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   43.088000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.592000] nf_conntrack version 0.5.0 (969 buckets, 3876 max)
[   44.752000] usbcore: registered new interface driver cdc_acm
[   44.756000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD
[   44.812000] usbcore: registered new interface driver usblp
[   44.884000] usbcore: registered new interface driver usbserial
[   44.892000] USB Serial support registered for generic
[   44.896000] usbcore: registered new interface driver usbserial_generic
[   44.904000] usbserial: USB Serial Driver core
[   45.136000] USB Serial support registered for GSM modem (1-port)
[   45.144000] usbcore: registered new interface driver option
[   45.148000] option: v0.7.2:USB Driver for GSM modems
[   49.584000] eth1: link forced UP - 100/full - flow control off/off
[   49.592000] device eth1 entered promiscuous mode
[   49.604000] br-lan: port 1(eth1) entered forwarding state
[   49.612000] br-lan: port 1(eth1) entered forwarding state
[   51.616000] br-lan: port 1(eth1) entered forwarding state



BusyBox v1.19.4 (2012-08-20 00:00:05 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 ATTITUDE ADJUSTMENT (Bleeding Edge, r33270)
 -----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
 -----------------------------------------------------
root@OpenWrt:/#
[/spoiler]

« Última modificación: 09-09-2012, 18:03 (Domingo) por elmasvital »

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4608
Si tienes problemas con las compilaciones que hay por el hilo, lo mejor, es que te hagas una propia con lo que necesites.
El rXXXX es el número de revisión. Se indica cuando actualizas el trunk para compilar. También puedes verlo en LuCi.
Del resto ... me he perdido  ^-^


feluco

  • Visitante
Escribo de memoria, no tengo el router delante...pero en la pagina 14 de este hilo hay varias con ese kernel, creo recordar....metesela y compruebalo tu mismo.


Sir-Stephen

  • Visitante
Saludosssss.....  hace tiempo que no pasaba por aqui, que Me fui con los vecinos de la radio wifi, y ahi es donde comienza el problema:  en el wifi, que aun no Me habia dedicado a él.

"Este driver  conecta como 'cliente transparente' (en la misma subred del AP principal) sin ningún paquete adicional. Para configurarlo desde LuCi, activamos el wifi, escaneamos, nos unimos a la red, introducimos la clave y listos  "

Pues al igual que sankosme, no consigo conectar nada mas que por cable y lan.... no hay manera....  desinstale el b43, instale el propietario siguiendo los pasos ( incluido ese script raro... ) y no consigo conectar.... por cierto, que siguiendo las explicaciones iniciales, desactive el firewall, pero el dhcp no hay manera, parece que no esta sito en /etc/init.d/dhcp...

Lo curioso es que alguien mencionaba mas arriba de colocar la misma IP en el wifi que en el lan... vale, pero.... siguiendo estas explicaciones, en ningun lugar se dice donde hay que cambiar nada... al poner el wifi como cliente, parece que todo va automatico... o quizas el "no desactivamiento" del dhcp Me esta metiendo la pata??

Alguna ayudilla?  graciasssssss...

« Última modificación: 10-09-2012, 21:46 (Lunes) por Sir-Stephen »

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4608
Lo siento, pero mis 2 hg553 tienen demasiadas cosas instaladas, y están configurados perfectamente (a mis necesidades) como para arriesgarme a 'toquetearlos'  ^-^
El modo 'puente cliente' de broadcom está explicado aquí: http://wiki.openwrt.org/doc/recipes/bridgedclient  ;)

EDITO: después de probar durante algunas semanas la nueva versión de mldonkey y ver su estabilidad y buen funcionamiento, la he añadido en el post principal. He dejado también disponible la 3.1.0.

« Última modificación: 11-09-2012, 08:39 (Martes) por jar229 »

sankosme

  • Visitante
Hola a todos, he instalado el aria2 pero no logro hacer funcionar el webui. En el primer post pone:

Descomprimimos el fichero, renombramos la carpeta a aria2web y lo copiamos con winscp dentro del subdirectorio /www1

El directorio es /www o /www1 ??? He probado en los dos (www1 no lo tengo he probado a crearlo) pero luego pongo 192.168.2.101:8010/aria2web pero no me muestra ninguna página.  Hay que hacer algo más?? En modo consola funciona perfectamente
 (aria2c --conf-path /etc/config/aria2.conf http://descargaxxxx)

Salu2

« Última modificación: 11-09-2012, 17:33 (Martes) por sankosme »

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4608
En el tutorial, la configuración del webui está explicada contando con que tienes instalado el servidor lighttpd.
Si no lo has instalado, prueba con el servidor web que trae LuCi.
Descomprime en /www y pon en el navegador la siguiente url: http://192.168.2.101/aria2web

No tengo claro que te funcione ... ya contarás  ;)


sankosme

  • Visitante
Hola, pues sí, ahora accedo a la interfaz web pero no logro conectar. Tengo que abrir el puerto 6800 en el huawei??.  El fichero aria2.conf lo tengo así:

daemon=true
enable-rpc=true
rpc-listen-port=6800
rpc-listen-all=true
####### Directorio de descargas ##########
dir=/mnt/aria2
#Directorio dónde se alojará el log de aria2
log=/mnt/aria2/aria2.log
log-level=warn
dht-listen-port=6599
auto-save-interval=30
#seed ratio and seed time in minutes
seed-ratio=1.0
seed-time=1460
max-upload-limit=120K
event-poll=select

Salu2



Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4608
Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #373 en: 12-09-2012, 08:41 (Miércoles) »
Hola, pues sí, ahora accedo a la interfaz web pero no logro conectar. Tengo que abrir el puerto 6800 en el huawei??.  El fichero aria2.conf lo tengo así:


No logras conectar, dónde y con qué ?


sankosme

  • Visitante
Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #374 en: 12-09-2012, 09:02 (Miércoles) »
Desde el pc si entro en http://192.168.2.101/aria2web ahora me sale la página el webui del aria2. Luego, voy a conecction settings, le doy a conectar y no me conecta, si intento añadir un enlace para descargar no me lo añade. Por eso preguntaba si había que abrir el puerto en el router.

Salu2


Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4608
Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #375 en: 12-09-2012, 09:26 (Miércoles) »
Tienes que abrir un puerto para que aria2 se comunique con el 'exterior'.
Pero para el webui no debería hacer falta. Igualmente, pruébalo.
Ya dije que no sabía si te iba a funcionar ... ^-^

EDITO: en conecction settings no tienes que cambiar nada (en principio). Los valores por defecto deberían ser correctos.

« Última modificación: 12-09-2012, 09:35 (Miércoles) por jar229 »

elmasvital

  • Visitante
Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #376 en: 12-09-2012, 14:06 (Miércoles) »
Buenas... existe alguna compilacion con el kernel 3.3.8-1? Para los modules de 3g me los pide. Los instalo forzando pero el kernel avisa de algun fallo cuando conecto el 3g.

Por cierto de donde viene la numeracion rXXXX que poneis en los firm?

No consigo realizar el switch para que deje de reconocer el modem como una unidad cdrom de instalación de drivers a modem. Ni con usb_modeswitch ni con sdparm

Dejo un dmesg
[spoiler][    0.368000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.372000]   Amd/Fujitsu Extended Query version 1.3.
[    0.380000] number of CFI chips: 1
[    0.384000] bcm63xxpart: CFE boot tag found with version 7 and board type HW5                                                               53
[    0.392000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.396000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.404000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ec000                                                               0
[    0.412000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
[    0.420000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
[    0.428000] bcm63xxpart: Spare partition is offset 700004 and length 8dfffc
[    0.432000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.440000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.448000] 0x000000000000-0x000000020000 : "CFE"
[    0.456000] 0x000000020100-0x000000120000 : "kernel"
[    0.460000] mtd: partition "kernel" must either start or end on erase block b                                                               oundary or be smaller than an erase block -- forcing read-only
[    0.476000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.488000] mtd: partition "rootfs" set to be root filesystem
[    0.492000] mtd: partition "rootfs_data" created automatically, ofs=700000, l                                                               en=8E0000
[    0.500000] 0x000000700000-0x000000fe0000 : "rootfs_data"
[    0.512000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.520000] 0x000000020000-0x000000fe0000 : "linux"
[    0.540000] bcm63xx_enet MII bus: probed
[    0.544000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Generic P                                                               HY]
[    0.556000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.564000] Registered led device: HW553:red:lan
[    0.568000] Registered led device: HW553:blue:lan
[    0.568000] Registered led device: HW553:red:adsl
[    0.568000] Registered led device: HW553:blue:adsl
[    0.568000] Registered led device: HW553:red:power
[    0.568000] Registered led device: HW553:blue:power
[    0.572000] Registered led device: HW553:red:wifi
[    0.572000] Registered led device: HW553:red:internetkey
[    0.572000] Registered led device: HW553:blue:internetkey
[    0.572000] TCP cubic registered
[    0.576000] NET: Registered protocol family 17
[    0.584000] 8021q: 802.1Q VLAN Support v1.8
[    0.596000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.604000] Freeing unused kernel memory: 196k freed
[    4.160000] eth1: link forced UP - 100/full - flow control off/off
[    4.400000] roboswitch: Probing device eth0: Failed to enable switch
[    4.408000] roboswitch: Probing device eth1: found a 5325! It's a 5350.
[   10.564000] JFFS2 notice: (371) jffs2_build_xattr_subsystem: complete buildin                                                               g xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 12 of xref (0 dead, 2                                                                orphan) found.
[   11.800000] SCSI subsystem initialized
[   12.048000] usbcore: registered new interface driver usbfs
[   12.052000] usbcore: registered new interface driver hub
[   12.064000] usbcore: registered new device driver usb
[   12.668000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.780000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   12.784000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus                                                                number 1
[   12.820000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   12.836000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurr                                                               ent ignored
[   12.844000] hub 1-0:1.0: USB hub found
[   12.848000] hub 1-0:1.0: 2 ports detected
[   13.008000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.120000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   13.124000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus                                                                number 2
[   13.132000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   13.200000] hub 2-0:1.0: USB hub found
[   13.204000] hub 2-0:1.0: 1 port detected
[   13.372000] uhci_hcd: USB Universal Host Controller Interface driver
[   13.568000] Initializing USB Mass Storage driver...
[   13.572000] usbcore: registered new interface driver usb-storage
[   13.580000] USB Mass Storage support registered.
[   38.000000] Compat-wireless backport release: compat-wireless-2012-07-13
[   38.004000] Backport based on wireless-testing.git master-2012-07-16
[   38.012000] compat.git: wireless-testing.git
[   38.080000] cfg80211: Calling CRDA to update world regulatory domain
[   38.084000] cfg80211: World regulatory domain updated:
[   38.092000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                                               n, max_eirp)
[   38.100000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.108000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.116000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.124000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.132000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.296000] cfg80211: World regulatory domain updated:
[   39.304000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                                               n, max_eirp)
[   39.312000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.320000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.328000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.336000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.344000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.880000] usbcore: registered new interface driver rtl8187
[   39.920000] usbcore: registered new interface driver rt2800usb
[   41.440000] wl: module license 'unspecified' taints kernel.
[   41.444000] Disabling lock debugging due to kernel taint
[   41.548000] SSB/BCMA glue driver successfully attached
[   41.568000] Got version 2 SPROM from SSB
[   41.580000] wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.56.27
[   41.660000] Button Hotplug driver version 0.4.1
[   42.532000] tun: Universal TUN/TAP device driver, 1.6
[   42.536000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   43.088000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.592000] nf_conntrack version 0.5.0 (969 buckets, 3876 max)
[   44.752000] usbcore: registered new interface driver cdc_acm
[   44.756000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD                                                               N adapters
[   44.812000] usbcore: registered new interface driver usblp
[   44.884000] usbcore: registered new interface driver usbserial
[   44.892000] USB Serial support registered for generic
[   44.896000] usbcore: registered new interface driver usbserial_generic
[   44.904000] usbserial: USB Serial Driver core
[   45.136000] USB Serial support registered for GSM modem (1-port)
[   45.144000] usbcore: registered new interface driver option
[   45.148000] option: v0.7.2:USB Driver for GSM modems
[   49.584000] eth1: link forced UP - 100/full - flow control off/off
[   49.592000] device eth1 entered promiscuous mode
[   49.604000] br-lan: port 1(eth1) entered forwarding state
[   49.612000] br-lan: port 1(eth1) entered forwarding state
[   51.616000] br-lan: port 1(eth1) entered forwarding state
[  217.080000] usb 2-1: new full-speed USB device number 2 using bcm63xx_ohci
[  217.256000] scsi0 : usb-storage 2-1:1.0
[  217.264000] usb 2-1: USB disconnect, device number 2
[  217.952000] usb 2-1: new full-speed USB device number 3 using bcm63xx_ohci
[  218.124000] CPU 0 Unable to handle kernel paging request at virtual address 0                                                               0000000, epc == 829b1918, ra == 829b189c
[  218.136000] Oops[#1]:
[  218.136000] Cpu 0
[  218.136000] $ 0   : 00000000 00000069 00000000 829b0000
[  218.136000] $ 4   : 00000000 829c0938 00001001 00001001
[  218.136000] $ 8   : 00000008 80126fa8 00000008 80164f10
[  218.136000] $12   : 00000000 00000000 00000000 00000000
[  218.136000] $16   : 829b583c 829c3800 829fe868 829c390c
[  218.136000] $20   : 83b15080 f7ffffff 829fe800 830383a0
[  218.136000] $24   : 00000018 800477d0
[  218.136000] $28   : 83b68000 83b69ad0 00000004 829b189c
[  218.136000] Hi    : 0000000f
[  218.136000] Lo    : 00000016
[  218.136000] epc   : 829b1918 0x829b1918
[  218.136000]     Tainted: P           O
[  218.136000] ra    : 829b189c 0x829b189c
[  218.136000] Status: 10008403    KERNEL EXL IE
[  218.136000] Cause : 00800008
[  218.136000] BadVA : 00000000
[  218.136000] PrId  : 0002a010 (Broadcom BMIPS4350)
[  218.136000] Modules linked in: option sg gpio_keys_polled usb_wwan usbserial                                                                usblp cdc_acm evdev ledtrig_gpio nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_connt                                                               rack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_conntrack xt_CT xt_NOTRACK iptable                                                               _raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS                                                                ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter i                                                               p_tables xt_tcpudp x_tables tun vfat fat cifs autofs4 button_hotplug(O) wl(PO) w                                                               l_glue(O) rt2800usb(O) rtl8187(O) rt2800lib(O) rt2x00usb(O) rt2x00pci(O) rt2x00l                                                               ib(O) nls_utf8 mac80211(O) crc_itu_t crc_ccitt input_polldev eeprom_93cx6 cfg802                                                               11(O) compat(O) input_core md5 md4 hmac ecb des_generic arc4 aes_generic crypto_                                                               blkcipher cryptomgr aead usb_storage uhci_hcd ohci_hcd ehci_hcd sd_mod ext4 jbd2                                                                mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_hash crypto_algapi sw                                                               itch_adm(O) switch_robo(O) switch_core(O)
[  218.136000] Process khubd (pid: 398, threadinfo=83b68000, task=83ac24c0, tls=                                                               00000000)
[  218.136000] Stack : 00000000 83b69b48 831f1b30 00000000 831cdc70 83b69b98 83a                                                               f6280 00000001
[  218.136000]         829fe868 800e0cac 831cdc70 831f1b30 ffffffef 83b69b98 83a                                                               f6280 00000001
[  218.136000]         829fe868 800e1a8c 831f1b30 8319df00 8319df00 00000008 fff                                                               ffff5 802f0000
[  218.136000]         0000a1ff 800e1448 831f1a90 831f1b30 831f1b30 829ac400 83b                                                               69b98 800e1b00
[  218.136000]         83b69b70 802619e4 fffffffe 831f1b30 00000000 829ac400 831                                                               cdc70 83af6280
[  218.136000]         ...
[  218.136000] Call Trace:[<800e0cac>] 0x800e0cac
[  218.136000] [<800e1a8c>] 0x800e1a8c
[  218.136000] [<800e1448>] 0x800e1448
[  218.136000] [<800e1b00>] 0x800e1b00
[  218.136000] [<800e25cc>] 0x800e25cc
[  218.136000] [<8302bdbc>] 0x8302bdbc
[  218.136000] [<8016295c>] 0x8016295c
[  218.136000] [<80162be8>] 0x80162be8
[  218.136000] [<80162d70>] 0x80162d70
[  218.136000] [<80162d40>] 0x80162d40
[  218.136000] [<801613a8>] 0x801613a8
[  218.136000] [<8011f4ac>] 0x8011f4ac
[  218.136000] [<80162adc>] 0x80162adc
[  218.136000] [<80162194>] 0x80162194
[  218.136000] [<80160798>] 0x80160798
[  218.136000] [<8011e5d8>] 0x8011e5d8
[  218.136000] [<8302aebc>] 0x8302aebc
[  218.136000] [<83032258>] 0x83032258
[  218.136000] [<801cdaf8>] 0x801cdaf8
[  218.136000] [<80162be8>] 0x80162be8
[  218.136000] [<80162d70>] 0x80162d70
[  218.136000] [<80162d40>] 0x80162d40
[  218.136000] [<801613a8>] 0x801613a8
[  218.136000] [<8011f4ac>] 0x8011f4ac
[  218.136000] [<80162adc>] 0x80162adc
[  218.136000] [<80162194>] 0x80162194
[  218.136000] [<80160798>] 0x80160798
[  218.136000] [<8302a038>] 0x8302a038
[  218.136000] [<83023e64>] 0x83023e64
[  218.136000] [<83024978>] 0x83024978
[  218.136000] [<80046b58>] 0x80046b58
[  218.136000] [<8003c520>] 0x8003c520
[  218.136000] [<83023ec4>] 0x83023ec4
[  218.136000] [<8003bdc0>] 0x8003bdc0
[  218.136000] [<800152d0>] 0x800152d0
[  218.136000] [<8003bd38>] 0x8003bd38
[  218.136000] [<800152c0>] 0x800152c0
[  218.136000]
[  218.136000]
[  218.136000] Code: 108303bf  3c03829b  8c420140 <8c430000> 24630001  ac430000                                                                 3c03829b  24645830  0c08f4e6
[  218.500000] ---[ end trace 22a5fc9cdd26965c ]---
root@OpenWrt:/#

[/spoiler]

Y el bootlog por serial sin el 3g pinchado
[spoiler][    0.000000] Linux version 3.3.8 (marco@homer) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #7 Sat Aug 25 18:41:42 CEST 2012
[    0.000000] Detected Broadcom 0x6358 CPU revision a1
[    0.000000] CPU frequency is 300 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 39 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-48.46
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW553
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61848k/65536k available (2244k kernel code, 3688k reserved, 404k data, 196k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x800ffff]
[    0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
[    0.124000] Switching to clocksource MIPS
[    0.136000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.164000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[    0.212000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.220000] NET: Registered protocol family 2
[    0.228000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.236000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.240000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.248000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.256000] TCP reno registered
[    0.260000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.264000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.272000] NET: Registered protocol family 1
[    0.280000] audit: initializing netlink socket (disabled)
[    0.288000] type=2000 audit(0.288:1): initialized
[    0.292000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.300000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.308000] msgmni has been set to 120
[    0.312000] io scheduler noop registered
[    0.316000] io scheduler deadline registered (default)
[    0.324000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.332000] console [ttyS0] enabled, bootconsole disabled
[    0.332000] console [ttyS0] enabled, bootconsole disabled
[    0.352000] physmap platform flash device: 02000000 at 1e000000
[    0.356000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
[    0.368000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.372000]   Amd/Fujitsu Extended Query version 1.3.
[    0.380000] number of CFI chips: 1
[    0.384000] bcm63xxpart: CFE boot tag found with version 7 and board type HW553
[    0.392000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.396000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.404000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ec0000
[    0.412000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
[    0.420000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
[    0.428000] bcm63xxpart: Spare partition is offset 700004 and length 8dfffc
[    0.432000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.440000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.448000] 0x000000000000-0x000000020000 : "CFE"
[    0.456000] 0x000000020100-0x000000120000 : "kernel"
[    0.460000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.476000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.488000] mtd: partition "rootfs" set to be root filesystem
[    0.492000] mtd: partition "rootfs_data" created automatically, ofs=700000, len=8E0000
[    0.500000] 0x000000700000-0x000000fe0000 : "rootfs_data"
[    0.512000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.520000] 0x000000020000-0x000000fe0000 : "linux"
[    0.540000] bcm63xx_enet MII bus: probed
[    0.544000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Generic PHY]
[    0.556000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.572000] TCP cubic registered
[    0.576000] NET: Registered protocol family 17
[    0.584000] 8021q: 802.1Q VLAN Support v1.8
[    0.596000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.604000] Freeing unused kernel memory: 196k freed
awk: /proc/cpuinfo: No such file or directory
[    4.160000] eth1: link forced UP - 100/full - flow control off/off
[    4.400000] roboswitch: Probing device eth0: Failed to enable switch
[    4.408000] roboswitch: Probing device eth1: found a 5325! It's a 5350.
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[   10.564000] JFFS2 notice: (371) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 12 of xref (0 dead, 2 orphan) found.
[   11.800000] SCSI subsystem initialized
[   12.048000] usbcore: registered new interface driver usbfs
[   12.052000] usbcore: registered new interface driver hub
[   12.064000] usbcore: registered new device driver usb
[   12.668000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.780000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   12.784000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   12.820000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   12.836000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   12.844000] hub 1-0:1.0: USB hub found
[   12.848000] hub 1-0:1.0: 2 ports detected
[   13.008000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.120000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   13.124000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   13.132000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   13.200000] hub 2-0:1.0: USB hub found
[   13.204000] hub 2-0:1.0: 1 port detected
[   13.372000] uhci_hcd: USB Universal Host Controller Interface driver
[   13.568000] Initializing USB Mass Storage driver...
[   13.572000] usbcore: registered new interface driver usb-storage
[   13.580000] USB Mass Storage support registered.
switching to jffs2
- init -

Please press Enter to activate this console. [   38.000000] Compat-wireless backport release: compat-wireless-2012-07-13
[   38.004000] Backport based on wireless-testing.git master-2012-07-16
[   38.012000] compat.git: wireless-testing.git
[   38.080000] cfg80211: Calling CRDA to update world regulatory domain
[   38.084000] cfg80211: World regulatory domain updated:
[   38.092000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   38.100000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.108000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.116000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.124000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.132000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.296000] cfg80211: World regulatory domain updated:
[   39.304000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   39.312000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.320000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.328000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.336000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.344000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.880000] usbcore: registered new interface driver rtl8187
[   39.920000] usbcore: registered new interface driver rt2800usb
[   41.440000] wl: module license 'unspecified' taints kernel.
[   41.444000] Disabling lock debugging due to kernel taint
[   41.548000] SSB/BCMA glue driver successfully attached
[   41.568000] Got version 2 SPROM from SSB
[   41.580000] wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.56.27
[   41.660000] Button Hotplug driver version 0.4.1
[   42.532000] tun: Universal TUN/TAP device driver, 1.6
[   42.536000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   43.088000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.592000] nf_conntrack version 0.5.0 (969 buckets, 3876 max)
[   44.752000] usbcore: registered new interface driver cdc_acm
[   44.756000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD
[   44.812000] usbcore: registered new interface driver usblp
[   44.884000] usbcore: registered new interface driver usbserial
[   44.892000] USB Serial support registered for generic
[   44.896000] usbcore: registered new interface driver usbserial_generic
[   44.904000] usbserial: USB Serial Driver core
[   45.136000] USB Serial support registered for GSM modem (1-port)
[   45.144000] usbcore: registered new interface driver option
[   45.148000] option: v0.7.2:USB Driver for GSM modems
[   49.584000] eth1: link forced UP - 100/full - flow control off/off
[   49.592000] device eth1 entered promiscuous mode
[   49.604000] br-lan: port 1(eth1) entered forwarding state
[   49.612000] br-lan: port 1(eth1) entered forwarding state
[   51.616000] br-lan: port 1(eth1) entered forwarding state



BusyBox v1.19.4 (2012-08-20 00:00:05 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 ATTITUDE ADJUSTMENT (Bleeding Edge, r33270)
 -----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
 -----------------------------------------------------
root@OpenWrt:/#
[/spoiler]

Sigo estudiando este tema. He visto en una web la siguiente información:

1) Ensure that you have the following options enabled in your OpenWRT kernel config:
* Kernel modules-->USB Support-->kmod-usb-serial
* Kernel modules-->USB Support-->kmod-usb-serial-option
* Network-->chat
* Network-->ppp

Lo que me hace pensar que es una opción que hay que señalar al compilar el kernel. Alguien puede confirmarmelo? Si fuera así y si no resulta mucha molestia podríais activarlo si realizais alguna compilación nueva? No tengo conocimientos de compilar en linux


Saludos.

« Última modificación: 12-09-2012, 14:09 (Miércoles) por elmasvital »

elmasvital

  • Visitante
Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #377 en: 12-09-2012, 14:07 (Miércoles) »
Buenas... existe alguna compilacion con el kernel 3.3.8-1? Para los modules de 3g me los pide. Los instalo forzando pero el kernel avisa de algun fallo cuando conecto el 3g.

Por cierto de donde viene la numeracion rXXXX que poneis en los firm?

No consigo realizar el switch para que deje de reconocer el modem como una unidad cdrom de instalación de drivers a modem. Ni con usb_modeswitch ni con sdparm

Dejo un dmesg
[spoiler][    0.368000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.372000]   Amd/Fujitsu Extended Query version 1.3.
[    0.380000] number of CFI chips: 1
[    0.384000] bcm63xxpart: CFE boot tag found with version 7 and board type HW5                                                               53
[    0.392000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.396000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.404000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ec000                                                               0
[    0.412000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
[    0.420000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
[    0.428000] bcm63xxpart: Spare partition is offset 700004 and length 8dfffc
[    0.432000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.440000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.448000] 0x000000000000-0x000000020000 : "CFE"
[    0.456000] 0x000000020100-0x000000120000 : "kernel"
[    0.460000] mtd: partition "kernel" must either start or end on erase block b                                                               oundary or be smaller than an erase block -- forcing read-only
[    0.476000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.488000] mtd: partition "rootfs" set to be root filesystem
[    0.492000] mtd: partition "rootfs_data" created automatically, ofs=700000, l                                                               en=8E0000
[    0.500000] 0x000000700000-0x000000fe0000 : "rootfs_data"
[    0.512000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.520000] 0x000000020000-0x000000fe0000 : "linux"
[    0.540000] bcm63xx_enet MII bus: probed
[    0.544000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Generic P                                                               HY]
[    0.556000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.564000] Registered led device: HW553:red:lan
[    0.568000] Registered led device: HW553:blue:lan
[    0.568000] Registered led device: HW553:red:adsl
[    0.568000] Registered led device: HW553:blue:adsl
[    0.568000] Registered led device: HW553:red:power
[    0.568000] Registered led device: HW553:blue:power
[    0.572000] Registered led device: HW553:red:wifi
[    0.572000] Registered led device: HW553:red:internetkey
[    0.572000] Registered led device: HW553:blue:internetkey
[    0.572000] TCP cubic registered
[    0.576000] NET: Registered protocol family 17
[    0.584000] 8021q: 802.1Q VLAN Support v1.8
[    0.596000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.604000] Freeing unused kernel memory: 196k freed
[    4.160000] eth1: link forced UP - 100/full - flow control off/off
[    4.400000] roboswitch: Probing device eth0: Failed to enable switch
[    4.408000] roboswitch: Probing device eth1: found a 5325! It's a 5350.
[   10.564000] JFFS2 notice: (371) jffs2_build_xattr_subsystem: complete buildin                                                               g xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 12 of xref (0 dead, 2                                                                orphan) found.
[   11.800000] SCSI subsystem initialized
[   12.048000] usbcore: registered new interface driver usbfs
[   12.052000] usbcore: registered new interface driver hub
[   12.064000] usbcore: registered new device driver usb
[   12.668000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.780000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   12.784000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus                                                                number 1
[   12.820000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   12.836000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurr                                                               ent ignored
[   12.844000] hub 1-0:1.0: USB hub found
[   12.848000] hub 1-0:1.0: 2 ports detected
[   13.008000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.120000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   13.124000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus                                                                number 2
[   13.132000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   13.200000] hub 2-0:1.0: USB hub found
[   13.204000] hub 2-0:1.0: 1 port detected
[   13.372000] uhci_hcd: USB Universal Host Controller Interface driver
[   13.568000] Initializing USB Mass Storage driver...
[   13.572000] usbcore: registered new interface driver usb-storage
[   13.580000] USB Mass Storage support registered.
[   38.000000] Compat-wireless backport release: compat-wireless-2012-07-13
[   38.004000] Backport based on wireless-testing.git master-2012-07-16
[   38.012000] compat.git: wireless-testing.git
[   38.080000] cfg80211: Calling CRDA to update world regulatory domain
[   38.084000] cfg80211: World regulatory domain updated:
[   38.092000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                                               n, max_eirp)
[   38.100000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.108000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.116000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.124000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   38.132000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.296000] cfg80211: World regulatory domain updated:
[   39.304000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                                               n, max_eirp)
[   39.312000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.320000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.328000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.336000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.344000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20                                                               00 mBm)
[   39.880000] usbcore: registered new interface driver rtl8187
[   39.920000] usbcore: registered new interface driver rt2800usb
[   41.440000] wl: module license 'unspecified' taints kernel.
[   41.444000] Disabling lock debugging due to kernel taint
[   41.548000] SSB/BCMA glue driver successfully attached
[   41.568000] Got version 2 SPROM from SSB
[   41.580000] wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.56.27
[   41.660000] Button Hotplug driver version 0.4.1
[   42.532000] tun: Universal TUN/TAP device driver, 1.6
[   42.536000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   43.088000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.592000] nf_conntrack version 0.5.0 (969 buckets, 3876 max)
[   44.752000] usbcore: registered new interface driver cdc_acm
[   44.756000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD                                                               N adapters
[   44.812000] usbcore: registered new interface driver usblp
[   44.884000] usbcore: registered new interface driver usbserial
[   44.892000] USB Serial support registered for generic
[   44.896000] usbcore: registered new interface driver usbserial_generic
[   44.904000] usbserial: USB Serial Driver core
[   45.136000] USB Serial support registered for GSM modem (1-port)
[   45.144000] usbcore: registered new interface driver option
[   45.148000] option: v0.7.2:USB Driver for GSM modems
[   49.584000] eth1: link forced UP - 100/full - flow control off/off
[   49.592000] device eth1 entered promiscuous mode
[   49.604000] br-lan: port 1(eth1) entered forwarding state
[   49.612000] br-lan: port 1(eth1) entered forwarding state
[   51.616000] br-lan: port 1(eth1) entered forwarding state
[  217.080000] usb 2-1: new full-speed USB device number 2 using bcm63xx_ohci
[  217.256000] scsi0 : usb-storage 2-1:1.0
[  217.264000] usb 2-1: USB disconnect, device number 2
[  217.952000] usb 2-1: new full-speed USB device number 3 using bcm63xx_ohci
[  218.124000] CPU 0 Unable to handle kernel paging request at virtual address 0                                                               0000000, epc == 829b1918, ra == 829b189c
[  218.136000] Oops[#1]:
[  218.136000] Cpu 0
[  218.136000] $ 0   : 00000000 00000069 00000000 829b0000
[  218.136000] $ 4   : 00000000 829c0938 00001001 00001001
[  218.136000] $ 8   : 00000008 80126fa8 00000008 80164f10
[  218.136000] $12   : 00000000 00000000 00000000 00000000
[  218.136000] $16   : 829b583c 829c3800 829fe868 829c390c
[  218.136000] $20   : 83b15080 f7ffffff 829fe800 830383a0
[  218.136000] $24   : 00000018 800477d0
[  218.136000] $28   : 83b68000 83b69ad0 00000004 829b189c
[  218.136000] Hi    : 0000000f
[  218.136000] Lo    : 00000016
[  218.136000] epc   : 829b1918 0x829b1918
[  218.136000]     Tainted: P           O
[  218.136000] ra    : 829b189c 0x829b189c
[  218.136000] Status: 10008403    KERNEL EXL IE
[  218.136000] Cause : 00800008
[  218.136000] BadVA : 00000000
[  218.136000] PrId  : 0002a010 (Broadcom BMIPS4350)
[  218.136000] Modules linked in: option sg gpio_keys_polled usb_wwan usbserial                                                                usblp cdc_acm evdev ledtrig_gpio nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_connt                                                               rack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_conntrack xt_CT xt_NOTRACK iptable                                                               _raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS                                                                ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter i                                                               p_tables xt_tcpudp x_tables tun vfat fat cifs autofs4 button_hotplug(O) wl(PO) w                                                               l_glue(O) rt2800usb(O) rtl8187(O) rt2800lib(O) rt2x00usb(O) rt2x00pci(O) rt2x00l                                                               ib(O) nls_utf8 mac80211(O) crc_itu_t crc_ccitt input_polldev eeprom_93cx6 cfg802                                                               11(O) compat(O) input_core md5 md4 hmac ecb des_generic arc4 aes_generic crypto_                                                               blkcipher cryptomgr aead usb_storage uhci_hcd ohci_hcd ehci_hcd sd_mod ext4 jbd2                                                                mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_hash crypto_algapi sw                                                               itch_adm(O) switch_robo(O) switch_core(O)
[  218.136000] Process khubd (pid: 398, threadinfo=83b68000, task=83ac24c0, tls=                                                               00000000)
[  218.136000] Stack : 00000000 83b69b48 831f1b30 00000000 831cdc70 83b69b98 83a                                                               f6280 00000001
[  218.136000]         829fe868 800e0cac 831cdc70 831f1b30 ffffffef 83b69b98 83a                                                               f6280 00000001
[  218.136000]         829fe868 800e1a8c 831f1b30 8319df00 8319df00 00000008 fff                                                               ffff5 802f0000
[  218.136000]         0000a1ff 800e1448 831f1a90 831f1b30 831f1b30 829ac400 83b                                                               69b98 800e1b00
[  218.136000]         83b69b70 802619e4 fffffffe 831f1b30 00000000 829ac400 831                                                               cdc70 83af6280
[  218.136000]         ...
[  218.136000] Call Trace:[<800e0cac>] 0x800e0cac
[  218.136000] [<800e1a8c>] 0x800e1a8c
[  218.136000] [<800e1448>] 0x800e1448
[  218.136000] [<800e1b00>] 0x800e1b00
[  218.136000] [<800e25cc>] 0x800e25cc
[  218.136000] [<8302bdbc>] 0x8302bdbc
[  218.136000] [<8016295c>] 0x8016295c
[  218.136000] [<80162be8>] 0x80162be8
[  218.136000] [<80162d70>] 0x80162d70
[  218.136000] [<80162d40>] 0x80162d40
[  218.136000] [<801613a8>] 0x801613a8
[  218.136000] [<8011f4ac>] 0x8011f4ac
[  218.136000] [<80162adc>] 0x80162adc
[  218.136000] [<80162194>] 0x80162194
[  218.136000] [<80160798>] 0x80160798
[  218.136000] [<8011e5d8>] 0x8011e5d8
[  218.136000] [<8302aebc>] 0x8302aebc
[  218.136000] [<83032258>] 0x83032258
[  218.136000] [<801cdaf8>] 0x801cdaf8
[  218.136000] [<80162be8>] 0x80162be8
[  218.136000] [<80162d70>] 0x80162d70
[  218.136000] [<80162d40>] 0x80162d40
[  218.136000] [<801613a8>] 0x801613a8
[  218.136000] [<8011f4ac>] 0x8011f4ac
[  218.136000] [<80162adc>] 0x80162adc
[  218.136000] [<80162194>] 0x80162194
[  218.136000] [<80160798>] 0x80160798
[  218.136000] [<8302a038>] 0x8302a038
[  218.136000] [<83023e64>] 0x83023e64
[  218.136000] [<83024978>] 0x83024978
[  218.136000] [<80046b58>] 0x80046b58
[  218.136000] [<8003c520>] 0x8003c520
[  218.136000] [<83023ec4>] 0x83023ec4
[  218.136000] [<8003bdc0>] 0x8003bdc0
[  218.136000] [<800152d0>] 0x800152d0
[  218.136000] [<8003bd38>] 0x8003bd38
[  218.136000] [<800152c0>] 0x800152c0
[  218.136000]
[  218.136000]
[  218.136000] Code: 108303bf  3c03829b  8c420140 <8c430000> 24630001  ac430000                                                                 3c03829b  24645830  0c08f4e6
[  218.500000] ---[ end trace 22a5fc9cdd26965c ]---
root@OpenWrt:/#

[/spoiler]

Y el bootlog por serial sin el 3g pinchado
[spoiler][    0.000000] Linux version 3.3.8 (marco@homer) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #7 Sat Aug 25 18:41:42 CEST 2012
[    0.000000] Detected Broadcom 0x6358 CPU revision a1
[    0.000000] CPU frequency is 300 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 39 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-48.46
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW553
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61848k/65536k available (2244k kernel code, 3688k reserved, 404k data, 196k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x800ffff]
[    0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
[    0.124000] Switching to clocksource MIPS
[    0.136000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.164000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[    0.212000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.220000] NET: Registered protocol family 2
[    0.228000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.236000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.240000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.248000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.256000] TCP reno registered
[    0.260000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.264000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.272000] NET: Registered protocol family 1
[    0.280000] audit: initializing netlink socket (disabled)
[    0.288000] type=2000 audit(0.288:1): initialized
[    0.292000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.300000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.308000] msgmni has been set to 120
[    0.312000] io scheduler noop registered
[    0.316000] io scheduler deadline registered (default)
[    0.324000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.332000] console [ttyS0] enabled, bootconsole disabled
[    0.332000] console [ttyS0] enabled, bootconsole disabled
[    0.352000] physmap platform flash device: 02000000 at 1e000000
[    0.356000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
[    0.368000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.372000]   Amd/Fujitsu Extended Query version 1.3.
[    0.380000] number of CFI chips: 1
[    0.384000] bcm63xxpart: CFE boot tag found with version 7 and board type HW553
[    0.392000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.396000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.404000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ec0000
[    0.412000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
[    0.420000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
[    0.428000] bcm63xxpart: Spare partition is offset 700004 and length 8dfffc
[    0.432000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.440000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.448000] 0x000000000000-0x000000020000 : "CFE"
[    0.456000] 0x000000020100-0x000000120000 : "kernel"
[    0.460000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.476000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.488000] mtd: partition "rootfs" set to be root filesystem
[    0.492000] mtd: partition "rootfs_data" created automatically, ofs=700000, len=8E0000
[    0.500000] 0x000000700000-0x000000fe0000 : "rootfs_data"
[    0.512000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.520000] 0x000000020000-0x000000fe0000 : "linux"
[    0.540000] bcm63xx_enet MII bus: probed
[    0.544000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Generic PHY]
[    0.556000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.572000] TCP cubic registered
[    0.576000] NET: Registered protocol family 17
[    0.584000] 8021q: 802.1Q VLAN Support v1.8
[    0.596000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.604000] Freeing unused kernel memory: 196k freed
awk: /proc/cpuinfo: No such file or directory
[    4.160000] eth1: link forced UP - 100/full - flow control off/off
[    4.400000] roboswitch: Probing device eth0: Failed to enable switch
[    4.408000] roboswitch: Probing device eth1: found a 5325! It's a 5350.
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[   10.564000] JFFS2 notice: (371) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 12 of xref (0 dead, 2 orphan) found.
[   11.800000] SCSI subsystem initialized
[   12.048000] usbcore: registered new interface driver usbfs
[   12.052000] usbcore: registered new interface driver hub
[   12.064000] usbcore: registered new device driver usb
[   12.668000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.780000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   12.784000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   12.820000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   12.836000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   12.844000] hub 1-0:1.0: USB hub found
[   12.848000] hub 1-0:1.0: 2 ports detected
[   13.008000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.120000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   13.124000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   13.132000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   13.200000] hub 2-0:1.0: USB hub found
[   13.204000] hub 2-0:1.0: 1 port detected
[   13.372000] uhci_hcd: USB Universal Host Controller Interface driver
[   13.568000] Initializing USB Mass Storage driver...
[   13.572000] usbcore: registered new interface driver usb-storage
[   13.580000] USB Mass Storage support registered.
switching to jffs2
- init -

Please press Enter to activate this console. [   38.000000] Compat-wireless backport release: compat-wireless-2012-07-13
[   38.004000] Backport based on wireless-testing.git master-2012-07-16
[   38.012000] compat.git: wireless-testing.git
[   38.080000] cfg80211: Calling CRDA to update world regulatory domain
[   38.084000] cfg80211: World regulatory domain updated:
[   38.092000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   38.100000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.108000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.116000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.124000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.132000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.296000] cfg80211: World regulatory domain updated:
[   39.304000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   39.312000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.320000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.328000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.336000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.344000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.880000] usbcore: registered new interface driver rtl8187
[   39.920000] usbcore: registered new interface driver rt2800usb
[   41.440000] wl: module license 'unspecified' taints kernel.
[   41.444000] Disabling lock debugging due to kernel taint
[   41.548000] SSB/BCMA glue driver successfully attached
[   41.568000] Got version 2 SPROM from SSB
[   41.580000] wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.56.27
[   41.660000] Button Hotplug driver version 0.4.1
[   42.532000] tun: Universal TUN/TAP device driver, 1.6
[   42.536000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   43.088000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.592000] nf_conntrack version 0.5.0 (969 buckets, 3876 max)
[   44.752000] usbcore: registered new interface driver cdc_acm
[   44.756000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD
[   44.812000] usbcore: registered new interface driver usblp
[   44.884000] usbcore: registered new interface driver usbserial
[   44.892000] USB Serial support registered for generic
[   44.896000] usbcore: registered new interface driver usbserial_generic
[   44.904000] usbserial: USB Serial Driver core
[   45.136000] USB Serial support registered for GSM modem (1-port)
[   45.144000] usbcore: registered new interface driver option
[   45.148000] option: v0.7.2:USB Driver for GSM modems
[   49.584000] eth1: link forced UP - 100/full - flow control off/off
[   49.592000] device eth1 entered promiscuous mode
[   49.604000] br-lan: port 1(eth1) entered forwarding state
[   49.612000] br-lan: port 1(eth1) entered forwarding state
[   51.616000] br-lan: port 1(eth1) entered forwarding state



BusyBox v1.19.4 (2012-08-20 00:00:05 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 ATTITUDE ADJUSTMENT (Bleeding Edge, r33270)
 -----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
 -----------------------------------------------------
root@OpenWrt:/#
[/spoiler]

Sigo estudiando este tema. He visto en una web la siguiente información:

1) Ensure that you have the following options enabled in your OpenWRT kernel config:
* Kernel modules-->USB Support-->kmod-usb-serial
* Kernel modules-->USB Support-->kmod-usb-serial-option
* Network-->chat
* Network-->ppp

El modulo kmod-usb-serial-option es el que me está generando el problema. Los demás parecen funcionar bien.

Lo que me hace pensar que es una opción que hay que señalar al compilar el kernel. Alguien puede confirmarmelo? Si fuera así y si no resulta mucha molestia podríais activarlo si realizais alguna compilación nueva?

Saludos.


Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4608
Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #378 en: 12-09-2012, 14:38 (Miércoles) »
Pero cual es exactamente el problema que tienes ?
Te has leído la wiki sobre el uso de los modems 3g-usb ?: http://wiki.openwrt.org/doc/recipes/3gdongle
No estarás intentándolo con uno de esos que incluyen lector de micro-sd ?


elmasvital

  • Visitante
Re: OpenWRT en Huawei 553: LuCi Samba FTP MLDonkey Transmission Wifi rtorrent, etc.
« Respuesta #379 en: 12-09-2012, 15:23 (Miércoles) »
Pero cual es exactamente el problema que tienes ?
Te has leído la wiki sobre el uso de los modems 3g-usb ?: http://wiki.openwrt.org/doc/recipes/3gdongle
No estarás intentándolo con uno de esos que incluyen lector de micro-sd ?

CONSEGUIDO  ;D

Es un modem 3g efectivamente con lector micro sd K3520 de Huawei. Y ademas cuando lo instalas crea una unidad de cd con los drivers. Pero eso ya lo tienen resuelto y no da problemas. Claro que eso lo se ahora que funciona :-D

El problema era que uno de los modulos Kmod-usb-serial-option, no era soportado por la compilación que tenía instalada creo que era openwrt-HW553-squashfs-33270. Al instalarlo con opkg daba problemas y si lo forzabas a instalarlo luego al funcionar daba error el kernel que aparece en mis anteriores post. Y es que creo que este modulo necesita soporte desde el kernel por lo que os pedidira que si alguno hace alguna nueva compilación active, si no es mucha molestia claro:

 Ensure that you have the following options enabled in your OpenWRT kernel config:
* Kernel modules-->USB Support-->kmod-usb-serial
* Kernel modules-->USB Support-->kmod-usb-serial-option
* Network-->chat
* Network-->ppp


Finalmente con la oficial trunk que hay en tu primer post openwrt-HW553-squashfs-cfe se deja instalar y siguiendo el tutorial oficial se conecta sin problemas: http://wiki.openwrt.org/doc/recipes/3gdongle

Ahora tendre que afinarlo un poco porque va un poco lento. Creo que modificando los comandos at de conexión se consigue.

Ya pasare el tuto.

Saludos

« Última modificación: 12-09-2012, 15:26 (Miércoles) por elmasvital »