buenas,
tool, podrías probar esta otra compilación por favor?
http://www.mediafire.com/?bi29rp33b1tb4d6
Gracias.
Le he dado a escanear, pero no encuentra ninguna wifi. Ni creando un AP.
Hola a todos, hace unos días que estoy trasteando con openwrt y hoy me he agenciado de un cacharro de estos con ralink.
He probado esta compilación y furula correctamente tanto en modo cliente como AP, creo que has dado en el clavo, felicidades.
No tengo cable de serie pero puedo dejar un dmesg por si sirve de algo.
[spoiler=root@OpenWrt:~# dmesg]
add
[ 0.408000] device: 'mtdblock1': device_add
[ 0.408000] 0x000000120000-0x000000fe0000 : "rootfs"
[ 0.412000] device: 'mtd2': device_add
[ 0.412000] device: 'mtd2ro': device_add
[ 0.416000] device: '31:2': device_add
[ 0.416000] device: 'mtdblock2': device_add
[ 0.416000] mtd: partition "rootfs" set to be root filesystem
[ 0.424000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=CA0000
[ 0.432000] 0x000000340000-0x000000fe0000 : "rootfs_data"
[ 0.436000] device: 'mtd3': device_add
[ 0.436000] device: 'mtd3ro': device_add
[ 0.440000] device: '31:3': device_add
[ 0.440000] device: 'mtdblock3': device_add
[ 0.440000] 0x000000fe0000-0x000001000000 : "nvram"
[ 0.448000] device: 'mtd4': device_add
[ 0.448000] device: 'mtd4ro': device_add
[ 0.448000] device: '31:4': device_add
[ 0.448000] device: 'mtdblock4': device_add
[ 0.452000] 0x000000020000-0x000000fe0000 : "linux"
[ 0.456000] device: 'mtd5': device_add
[ 0.456000] device: 'mtd5ro': device_add
[ 0.456000] device: '31:5': device_add
[ 0.460000] device: 'mtdblock5': device_add
[ 0.460000] driver: 'physmap-flash.0': driver_bound: bound to device 'physmap-flash'
[ 0.460000] bus: 'platform': really_probe: bound device physmap-flash.0 to driver physmap-flash
[ 0.460000] bus: 'spi': add driver m25p80
[ 0.460000] bus: 'platform': add driver bcm63xx-hsspi
[ 0.460000] bus: 'platform': add driver spi_gpio
[ 0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (1)
[ 0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (2)
[ 0.464000] bus: 'platform': add driver bcm63xx_enet_shared
[ 0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet_shared.0 with driver bcm63xx_enet_shared
[ 0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet_shared with device bcm63xx_enet_shared.0
[ 0.464000] driver: 'bcm63xx_enet_shared.0': driver_bound: bound to device 'bcm63xx_enet_shared'
[ 0.464000] bus: 'platform': really_probe: bound device bcm63xx_enet_shared.0 to driver bcm63xx_enet_shared
[ 0.464000] bus: 'platform': add driver bcm63xx_enet
[ 0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet.1 with driver bcm63xx_enet
[ 0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet with device bcm63xx_enet.1
[ 0.464000] device: 'eth0': device_add
[ 0.468000] driver: 'bcm63xx_enet.1': driver_bound: bound to device 'bcm63xx_enet'
[ 0.468000] bus: 'platform': really_probe: bound device bcm63xx_enet.1 to driver bcm63xx_enet
[ 0.468000] bus: 'platform': add driver bcm63xx_enetsw
[ 0.472000] bus: 'platform': add driver bcm63xx-wdt
[ 0.472000] bus: 'platform': driver_probe_device: matched device bcm63xx-wdt with driver bcm63xx-wdt
[ 0.472000] bus: 'platform': really_probe: probing driver bcm63xx-wdt with device bcm63xx-wdt
[ 0.472000] device: 'watchdog': device_add
[ 0.472000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.476000] driver: 'bcm63xx-wdt': driver_bound: bound to device 'bcm63xx-wdt'
[ 0.476000] bus: 'platform': really_probe: bound device bcm63xx-wdt to driver bcm63xx-wdt
[ 0.480000] bus: 'platform': add driver leds-gpio
[ 0.480000] bus: 'platform': driver_probe_device: matched device leds-gpio.0 with driver leds-gpio
[ 0.480000] bus: 'platform': really_probe: probing driver leds-gpio with device leds-gpio.0
[ 0.480000] device: 'message': device_add
[ 0.480000] Registered led device: message
[ 0.480000] device: 'hspa': device_add
[ 0.480000] Registered led device: hspa
[ 0.480000] device: 'dsl': device_add
[ 0.480000] Registered led device: dsl
[ 0.480000] device: 'power': device_add
[ 0.484000] Registered led device: power
[ 0.484000] device: 'all_leds': device_add
[ 0.484000] Registered led device: all_leds
[ 0.484000] driver: 'leds-gpio.0': driver_bound: bound to device 'leds-gpio'
[ 0.484000] bus: 'platform': really_probe: bound device leds-gpio.0 to driver leds-gpio
[ 0.484000] TCP cubic registered
[ 0.488000] NET: Registered protocol family 17
[ 0.492000] 8021q: 802.1Q VLAN Support v1.8
[ 0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.516000] Freeing unused kernel memory: 196k freed
[ 3.316000] eth0: link forced UP - 100/full - flow control off/off
[ 3.492000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[ 4.560000] There is already a switch registered on the device 'eth0'
[ 5.808000] device class 'input': registering
[ 6.032000] Button Hotplug driver version 0.4.1
[ 13.584000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 13.592000] Backport based on wireless-testing.git master-2012-06-14
[ 13.596000] compat.git: wireless-testing.git
[ 13.660000] device class 'ieee80211': registering
[ 13.660000] Registering platform device 'regulatory.0'. Parent at platform
[ 13.660000] device: 'regulatory.0': device_add
[ 13.660000] bus: 'platform': add device regulatory.0
[ 13.664000] cfg80211: Calling CRDA to update world regulatory domain
[ 13.668000] cfg80211: World regulatory domain updated:
[ 13.676000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.684000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.692000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.700000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.708000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.716000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.340000] device class 'scsi_host': registering
[ 14.344000] bus: 'scsi': registered
[ 14.344000] device class 'scsi_device': registering
[ 14.344000] SCSI subsystem initialized
[ 14.432000] There is already a switch registered on the device 'eth0'
[ 14.784000] bus: 'usb': registered
[ 14.784000] bus: 'usb': add driver usbfs
[ 14.784000] usbcore: registered new interface driver usbfs
[ 14.792000] bus: 'usb': add driver hub
[ 14.792000] usbcore: registered new interface driver hub
[ 14.800000] bus: 'usb': add driver usb
[ 14.800000] usbcore: registered new device driver usb
[ 15.404000] bus: 'pci': add driver rt2800pci
[ 15.404000] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver rt2800pci
[ 15.404000] bus: 'pci': really_probe: probing driver rt2800pci with device 0000:00:01.0
[ 15.404000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[ 15.408000] rt2800pci 0000:00:01.0: enabling bus mastering
[ 15.408000] rt2800pci 0000:00:01.0: setting latency timer to 64
[ 15.412000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[ 15.420000] rt2800pci 0000:00:01.0: firmware: requesting RT3062.eeprom
[ 15.420000] device: '0000:00:01.0': device_add
[ 15.600000] device: '0000:00:01.0': device_unregister
[ 15.600000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3572, rf: 0005, rev: 0223.
[ 15.608000] device: 'phy0': device_add
[ 15.608000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.612000] device: 'wlan0': device_add
[ 15.612000] device: 'rt2800pci-phy0::radio': device_add
[ 15.612000] Registered led device: rt2800pci-phy0::radio
[ 15.612000] device: 'rt2800pci-phy0::assoc': device_add
[ 15.612000] Registered led device: rt2800pci-phy0::assoc
[ 15.612000] device: 'rt2800pci-phy0::quality': device_add
[ 15.612000] Registered led device: rt2800pci-phy0::quality
[ 15.612000] driver: '0000:00:01.0': driver_bound: bound to device 'rt2800pci'
[ 15.612000] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver rt2800pci
[ 15.800000] bus: 'bcma': registered
[ 15.800000] bus: 'pci': add driver bcma-pci-bridge
[ 16.500000] device class 'sound': registering
[ 17.008000] device: 'timer': device_add
[ 17.476000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.908000] device class 'scsi_disk': registering
[ 17.908000] bus: 'scsi': add driver sd
[ 17.948000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.956000] bus: 'platform': add driver bcm63xx_ehci
[ 17.956000] bus: 'platform': driver_probe_device: matched device bcm63xx_ehci.0 with driver bcm63xx_ehci
[ 17.956000] bus: 'platform': really_probe: probing driver bcm63xx_ehci with device bcm63xx_ehci.0
[ 18.060000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[ 18.064000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[ 18.100000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[ 18.116000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 18.124000] device: 'usb1': device_add
[ 18.124000] bus: 'usb': add device usb1
[ 18.124000] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[ 18.124000] bus: 'usb': really_probe: probing driver usb with device usb1
[ 18.124000] device: '1-0:1.0': device_add
[ 18.124000] bus: 'usb': add device 1-0:1.0
[ 18.124000] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[ 18.124000] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[ 18.124000] hub 1-0:1.0: USB hub found
[ 18.128000] hub 1-0:1.0: 2 ports detected
[ 18.132000] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[ 18.132000] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[ 18.132000] device: 'ep_81': device_add
[ 18.132000] driver: 'usb1': driver_bound: bound to device 'usb'
[ 18.132000] bus: 'usb': really_probe: bound device usb1 to driver usb
[ 18.132000] device: 'ep_00': device_add
[ 18.132000] driver: 'bcm63xx_ehci.0': driver_bound: bound to device 'bcm63xx_ehci'
[ 18.132000] bus: 'platform': really_probe: bound device bcm63xx_ehci.0 to driver bcm63xx_ehci
[ 18.132000] bus: 'pci': add driver ehci_hcd
[ 18.328000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[ 19.032000] bus: 'i2c': registered
[ 19.032000] bus: 'i2c': add driver dummy
[ 19.064000] i2c /dev entries driver
[ 19.064000] device class 'i2c-dev': registering
[ 19.240000] bus: 'usb': add driver cdc_acm
[ 19.240000] usbcore: registered new interface driver cdc_acm
[ 19.244000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 19.488000] bus: 'usb': add driver snd-usb-audio
[ 19.488000] usbcore: registered new interface driver snd-usb-audio
[ 19.628000] Initializing USB Mass Storage driver...
[ 19.632000] bus: 'usb': add driver usb-storage
[ 19.632000] usbcore: registered new interface driver usb-storage
[ 19.636000] USB Mass Storage support registered.
[ 19.824000] Linux video capture interface: v2.00
[ 19.828000] device class 'video4linux': registering
[ 20.184000] bus: 'platform': add driver gpio-keys-polled
[ 20.188000] bus: 'platform': driver_probe_device: matched device gpio-keys-polled.0 with driver gpio-keys-polled
[ 20.188000] bus: 'platform': really_probe: probing driver gpio-keys-polled with device gpio-keys-polled.0
[ 20.188000] device: 'input0': device_add
[ 20.188000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 20.196000] driver: 'gpio-keys-polled.0': driver_bound: bound to device 'gpio-keys-polled'
[ 20.196000] bus: 'platform': really_probe: bound device gpio-keys-polled.0 to driver gpio-keys-polled
[ 20.332000] bus: 'usb': add driver uvcvideo
[ 20.332000] usbcore: registered new interface driver uvcvideo
[ 20.336000] USB Video Class driver (1.1.1)
[ 26.580000] device: 'br-lan': device_add
[ 26.580000] eth0: link forced UP - 100/full - flow control off/off
[ 26.596000] device eth0 entered promiscuous mode
[ 26.604000] br-lan: port 1(eth0) entered forwarding state
[ 26.608000] br-lan: port 1(eth0) entered forwarding state
[ 28.612000] br-lan: port 1(eth0) entered forwarding state
[ 50.968000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 50.984000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 50.988000] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 79.668000] device: 'tmp.radio0': device_add
[ 79.680000] device: 'tmp.radio0': device_add
[ 85.568000] device: 'tmp.radio0': device_add
[ 85.592000] device: 'tmp.radio0': device_add
[ 127.040000] done.
[ 127.044000] JFFS2 notice: (1161) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 155.732000] device: 'tmp.radio0': device_add
[ 155.752000] device: 'tmp.radio0': device_add
[ 160.692000] device: 'tmp.radio0': device_add
[ 160.716000] device: 'tmp.radio0': device_add
[ 166.860000] device: 'tmp.radio0': device_add
[ 166.884000] device: 'tmp.radio0': device_add
[ 176.560000] device: 'tmp.radio0': device_add
[ 176.580000] device: 'tmp.radio0': device_add
[ 181.476000] device: 'tmp.radio0': device_add
[ 181.500000] device: 'tmp.radio0': device_add
[ 184.696000] device: 'tmp.radio0': device_add
[ 188.464000] device: 'tmp.radio0': device_add
[ 188.492000] device: 'tmp.radio0': device_add
[ 190.648000] device: 'tmp.radio0': device_add
[ 190.668000] device: 'tmp.radio0': device_add
[ 195.380000] device: 'tmp.radio0': device_add
[ 195.412000] device: 'tmp.radio0': device_add
[ 197.024000] device: 'tmp.radio0': device_add
[ 200.384000] device: 'tmp.radio0': device_add
[ 200.408000] device: 'tmp.radio0': device_add
[ 200.964000] device: 'wlan0': device_add
[ 202.148000] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'.
[ 202.156000] rt2800pci 0000:00:01.0: firmware: requesting rt2860.bin
[ 202.156000] device: '0000:00:01.0': device_add
[ 202.380000] device: '0000:00:01.0': device_unregister
[ 202.380000] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34.
[ 205.636000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[ 205.648000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[ 205.656000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[ 205.668000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[ 205.724000] device wlan0 entered promiscuous mode
[ 208.972000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
[ 208.984000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
[ 208.992000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
[ 209.004000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
[ 209.112000] br-lan: port 2(wlan0) entered forwarding state
[ 209.116000] br-lan: port 2(wlan0) entered forwarding state
[ 209.140000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 1, TXop: 47.
[ 209.164000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 1, TXop: 94.
[ 209.196000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 6, Aifs: 3, TXop: 0.
[ 209.216000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[ 211.120000] br-lan: port 2(wlan0) entered forwarding state
[/spoiler]
Si hace falta que haga mas pruebas estoy disponible.
