Autor Tema: [Desarrollo] OpenWrt en Huawei HG556a  (Leído 1673315 veces)

0 Usuarios y 2 Visitantes están viendo este tema.

tool

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #320 en: 09-07-2012, 20:11 (Lunes) »
Alguien puede subir la última compilación del ralink, no funciona.
No funciona :  http://www.mediafire.com/?bi29rp33b1tb4d6
Este firmware debería funciona también en los ralink:
https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654.bin

Es el último que he posteado.

Nada con tu firmware no funciona el Wifi. Lo reconoce pero no encuenta nada, ni crea ningún Wifi.

A ver si vuelve a postear el link de mediafire.



Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #321 en: 09-07-2012, 20:29 (Lunes) »
Por cierto, gracias a las pruebas que ha hecho raphik ya están terminados todos los parches para el router:
Parches SVN: https://dl.dropbox.com/u/4708147/openwrt/hg556a/HG556a_svn.patch
Firmware: https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654.bin

Saludos y a ver si podemos ayudarle a recuperar el wifi de su router...

Así pues, los parches y el firm, son compatibles tanto para routers con wifi atheros como ralink?
En cuanto llegue a casa mando los datos que pides.

Enviado desde mi u8500 usando Tapatalk 2
Para que funcione el wifi con openwrt hay que compilar el firmware con los drivers apropiados.
He compilado el firmware con los drivers del atheros y del ralink, por lo que debería funciona en ambos.
Si no me equivoco el firmware que comentáis que funciona para el ralink ha sido compilado seleccionando el paquete "kmod-rt2800-pci".

Alguien puede subir la última compilación del ralink, no funciona.
No funciona :  http://www.mediafire.com/?bi29rp33b1tb4d6
Este firmware debería funciona también en los ralink:
https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654.bin

Es el último que he posteado.
¿Puedes poner el bootlog?
dmesg > /www/dmesg.txt
Nada con tu firmware no funciona el Wifi. Lo reconoce pero no encuenta nada, ni crea ningún Wifi.

A ver si vuelve a postear el link de mediafire.

tool

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #322 en: 09-07-2012, 20:35 (Lunes) »
No sé, el caso es que lo reconoce el Wifi, pero no encuentra ni tampoco emite señal.

Al usuario geminis_demon, le funcionó la compilación de mediafire, de gmtii

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #323 en: 09-07-2012, 20:41 (Lunes) »
No sé, el caso es que lo reconoce el Wifi, pero no encuentra ni tampoco emite señal.

Al usuario geminis_demon, le funcionó la compilación de mediafire, de gmtii
He escrito "Puedes poner un bootlog?" donde no debía xDDD.

Podrías poner un bootlog de mi firmware por favor?

Para hacer un bootlog completo sin perder datos tienes que sacarlo a un fichero y descargarlo (el bootlog que me pasaste con el cfe estaba incompleto).
dmesg > /www/dmesg.txt

Saludos!

tool

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #324 en: 09-07-2012, 21:04 (Lunes) »
No sé, el caso es que lo reconoce el Wifi, pero no encuentra ni tampoco emite señal.

Al usuario geminis_demon, le funcionó la compilación de mediafire, de gmtii
He escrito "Puedes poner un bootlog?" donde no debía xDDD.

Podrías poner un bootlog de mi firmware por favor?

Para hacer un bootlog completo sin perder datos tienes que sacarlo a un fichero y descargarlo (el bootlog que me pasaste con el cfe estaba incompleto).
dmesg > /www/dmesg.txt

Saludos!
[spoiler=DMESG]
Código: [Seleccionar]
[    0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Jul 9 18:30:20 CEST 2012
[    0.000000] Detected Broadcom 0x6358 CPU revision a1
[    0.000000] CPU frequency is 300 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 39 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-49.46
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW556
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 8029f750, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16256 pages, LIFO batch:3
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61896k/65536k available (2225k kernel code, 3640k reserved, 398k data, 196k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x800ffff]
[    0.108000] pci 0000:00:01.0: [1814:3592] type 0 class 0x000280
[    0.108000] pci 0000:00:01.0: reg 10: [mem 0xffff0000-0xffffffff]
[    0.120000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[    0.124000] Switching to clocksource MIPS
[    0.136000] NET: Registered protocol family 2
[    0.140000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.148000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.156000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.164000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.172000] TCP reno registered
[    0.172000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.188000] NET: Registered protocol family 1
[    0.192000] PCI: CLS 0 bytes, default 16
[    0.196000] audit: initializing netlink socket (disabled)
[    0.200000] type=2000 audit(0.200:1): initialized
[    0.208000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.216000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.224000] msgmni has been set to 120
[    0.228000] io scheduler noop registered
[    0.232000] io scheduler deadline registered (default)
[    0.240000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.248000] console [ttyS0] enabled, bootconsole disabled
[    0.268000] physmap platform flash device: 02000000 at 1e000000
[    0.272000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
[    0.284000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
[    0.284000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.288000]   Amd/Fujitsu Extended Query version 1.3.
[    0.296000] number of CFI chips: 1
[    0.300000] bcm63xxpart: CFE boot tag found with version 8 and board type HW556
[    0.304000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.312000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.320000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ea0000
[    0.328000] bcm63xxpart: Partition 3 is cal_data offset ee0000 and length 20000
[    0.336000] bcm63xxpart: Partition 4 is nvram offset fe0000 and length 20000
[    0.344000] bcm63xxpart: Partition 5 is linux offset 20000 and length ec0000
[    0.348000] bcm63xxpart: Spare partition is offset 340004 and length c7fffc
[    0.356000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.364000] Creating 6 MTD partitions on "physmap-flash.0":
[    0.368000] 0x000000000000-0x000000020000 : "CFE"
[    0.380000] 0x000000020100-0x000000120000 : "kernel"
[    0.384000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.400000] 0x000000120000-0x000000fc0000 : "rootfs"
[    0.408000] mtd: partition "rootfs" set to be root filesystem
[    0.416000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=C80000
[    0.424000] 0x000000340000-0x000000fc0000 : "rootfs_data"
[    0.432000] 0x000000ee0000-0x000000f00000 : "cal_data"
[    0.444000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.452000] 0x000000020000-0x000000ee0000 : "linux"
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.480000] Registered led device: HW556::message
[    0.480000] Registered led device: HW556::hspa
[    0.480000] Registered led device: HW556::dsl
[    0.484000] Registered led device: HW556::power
[    0.484000] Registered led device: HW556::all
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.412000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.480000] There is already a switch registered on the device 'eth0'
[    9.128000] JFFS2 notice: (317) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 2 orphan) found.
[   12.272000] Compat-wireless backport release: compat-wireless-2012-06-14
[   12.276000] Backport based on wireless-testing.git master-2012-06-14
[   12.284000] compat.git: wireless-testing.git
[   12.352000] cfg80211: Calling CRDA to update world regulatory domain
[   12.356000] cfg80211: World regulatory domain updated:
[   12.364000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.372000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.380000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.388000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.396000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.404000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.852000] NET: Registered protocol family 10
[   13.300000] SCSI subsystem initialized
[   13.396000] There is already a switch registered on the device 'eth0'
[   13.752000] usbcore: registered new interface driver usbfs
[   13.760000] usbcore: registered new interface driver hub
[   13.768000] usbcore: registered new device driver usb
[   14.908000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   14.916000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   14.932000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.936000] Registered led device: rt2800pci-phy0::radio
[   14.936000] Registered led device: rt2800pci-phy0::assoc
[   14.936000] Registered led device: rt2800pci-phy0::quality
[   14.968000] Button Hotplug driver version 0.4.1
[   15.292000] PPP generic driver version 2.4.2
[   15.684000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.976000] NET: Registered protocol family 24
[   16.176000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   16.288000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   16.292000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   16.328000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   16.344000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   16.352000] hub 1-0:1.0: USB hub found
[   16.356000] hub 1-0:1.0: 2 ports detected
[   16.536000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   16.920000] usb 1-2: new high-speed USB device number 2 using bcm63xx_ehci
[   17.064000] hub 1-2:1.0: USB hub found
[   17.072000] hub 1-2:1.0: 4 ports detected
[   17.368000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.788000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   17.896000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   17.900000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   17.908000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   17.976000] hub 2-0:1.0: USB hub found
[   17.980000] hub 2-0:1.0: 1 port detected
[   18.156000] Initializing USB Mass Storage driver...
[   18.160000] usbcore: registered new interface driver usb-storage
[   18.168000] USB Mass Storage support registered.
[   18.204000] usbcore: registered new interface driver ums-alauda
[   18.240000] usbcore: registered new interface driver ums-cypress
[   18.280000] usbcore: registered new interface driver ums-datafab
[   18.316000] usbcore: registered new interface driver ums-freecom
[   18.356000] usbcore: registered new interface driver ums-isd200
[   18.392000] usbcore: registered new interface driver ums-jumpshot
[   18.432000] usbcore: registered new interface driver ums-karma
[   18.468000] usbcore: registered new interface driver ums-sddr09
[   18.508000] usbcore: registered new interface driver ums-sddr55
[   18.548000] usbcore: registered new interface driver ums-usbat
[   18.584000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   24.080000] eth0: link forced UP - 100/full - flow control off/off
[   24.088000] device eth0 entered promiscuous mode
[   24.100000] br-lan: port 1(eth0) entered forwarding state
[   24.104000] br-lan: port 1(eth0) entered forwarding state
[   26.108000] br-lan: port 1(eth0) entered forwarding state
[   35.096000] eth0: no IPv6 routers present
[/spoiler]

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #325 en: 09-07-2012, 21:08 (Lunes) »
No sé, el caso es que lo reconoce el Wifi, pero no encuentra ni tampoco emite señal.

Al usuario geminis_demon, le funcionó la compilación de mediafire, de gmtii
He escrito "Puedes poner un bootlog?" donde no debía xDDD.

Podrías poner un bootlog de mi firmware por favor?

Para hacer un bootlog completo sin perder datos tienes que sacarlo a un fichero y descargarlo (el bootlog que me pasaste con el cfe estaba incompleto).
dmesg > /www/dmesg.txt

Saludos!
[spoiler=DMESG]
Código: [Seleccionar]
[    0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Jul 9 18:30:20 CEST 2012
[    0.000000] Detected Broadcom 0x6358 CPU revision a1
[    0.000000] CPU frequency is 300 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 39 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-49.46
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW556
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 8029f750, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16256 pages, LIFO batch:3
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61896k/65536k available (2225k kernel code, 3640k reserved, 398k data, 196k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x800ffff]
[    0.108000] pci 0000:00:01.0: [1814:3592] type 0 class 0x000280
[    0.108000] pci 0000:00:01.0: reg 10: [mem 0xffff0000-0xffffffff]
[    0.120000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[    0.124000] Switching to clocksource MIPS
[    0.136000] NET: Registered protocol family 2
[    0.140000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.148000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.156000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.164000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.172000] TCP reno registered
[    0.172000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.188000] NET: Registered protocol family 1
[    0.192000] PCI: CLS 0 bytes, default 16
[    0.196000] audit: initializing netlink socket (disabled)
[    0.200000] type=2000 audit(0.200:1): initialized
[    0.208000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.216000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.224000] msgmni has been set to 120
[    0.228000] io scheduler noop registered
[    0.232000] io scheduler deadline registered (default)
[    0.240000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.248000] console [ttyS0] enabled, bootconsole disabled
[    0.268000] physmap platform flash device: 02000000 at 1e000000
[    0.272000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
[    0.284000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
[    0.284000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.288000]   Amd/Fujitsu Extended Query version 1.3.
[    0.296000] number of CFI chips: 1
[    0.300000] bcm63xxpart: CFE boot tag found with version 8 and board type HW556
[    0.304000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.312000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.320000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ea0000
[    0.328000] bcm63xxpart: Partition 3 is cal_data offset ee0000 and length 20000
[    0.336000] bcm63xxpart: Partition 4 is nvram offset fe0000 and length 20000
[    0.344000] bcm63xxpart: Partition 5 is linux offset 20000 and length ec0000
[    0.348000] bcm63xxpart: Spare partition is offset 340004 and length c7fffc
[    0.356000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.364000] Creating 6 MTD partitions on "physmap-flash.0":
[    0.368000] 0x000000000000-0x000000020000 : "CFE"
[    0.380000] 0x000000020100-0x000000120000 : "kernel"
[    0.384000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.400000] 0x000000120000-0x000000fc0000 : "rootfs"
[    0.408000] mtd: partition "rootfs" set to be root filesystem
[    0.416000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=C80000
[    0.424000] 0x000000340000-0x000000fc0000 : "rootfs_data"
[    0.432000] 0x000000ee0000-0x000000f00000 : "cal_data"
[    0.444000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.452000] 0x000000020000-0x000000ee0000 : "linux"
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.480000] Registered led device: HW556::message
[    0.480000] Registered led device: HW556::hspa
[    0.480000] Registered led device: HW556::dsl
[    0.484000] Registered led device: HW556::power
[    0.484000] Registered led device: HW556::all
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.412000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.480000] There is already a switch registered on the device 'eth0'
[    9.128000] JFFS2 notice: (317) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 2 orphan) found.
[   12.272000] Compat-wireless backport release: compat-wireless-2012-06-14
[   12.276000] Backport based on wireless-testing.git master-2012-06-14
[   12.284000] compat.git: wireless-testing.git
[   12.352000] cfg80211: Calling CRDA to update world regulatory domain
[   12.356000] cfg80211: World regulatory domain updated:
[   12.364000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.372000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.380000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.388000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.396000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.404000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.852000] NET: Registered protocol family 10
[   13.300000] SCSI subsystem initialized
[   13.396000] There is already a switch registered on the device 'eth0'
[   13.752000] usbcore: registered new interface driver usbfs
[   13.760000] usbcore: registered new interface driver hub
[   13.768000] usbcore: registered new device driver usb
[   14.908000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   14.916000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   14.932000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.936000] Registered led device: rt2800pci-phy0::radio
[   14.936000] Registered led device: rt2800pci-phy0::assoc
[   14.936000] Registered led device: rt2800pci-phy0::quality
[   14.968000] Button Hotplug driver version 0.4.1
[   15.292000] PPP generic driver version 2.4.2
[   15.684000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.976000] NET: Registered protocol family 24
[   16.176000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   16.288000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   16.292000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   16.328000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   16.344000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   16.352000] hub 1-0:1.0: USB hub found
[   16.356000] hub 1-0:1.0: 2 ports detected
[   16.536000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   16.920000] usb 1-2: new high-speed USB device number 2 using bcm63xx_ehci
[   17.064000] hub 1-2:1.0: USB hub found
[   17.072000] hub 1-2:1.0: 4 ports detected
[   17.368000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.788000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   17.896000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   17.900000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   17.908000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   17.976000] hub 2-0:1.0: USB hub found
[   17.980000] hub 2-0:1.0: 1 port detected
[   18.156000] Initializing USB Mass Storage driver...
[   18.160000] usbcore: registered new interface driver usb-storage
[   18.168000] USB Mass Storage support registered.
[   18.204000] usbcore: registered new interface driver ums-alauda
[   18.240000] usbcore: registered new interface driver ums-cypress
[   18.280000] usbcore: registered new interface driver ums-datafab
[   18.316000] usbcore: registered new interface driver ums-freecom
[   18.356000] usbcore: registered new interface driver ums-isd200
[   18.392000] usbcore: registered new interface driver ums-jumpshot
[   18.432000] usbcore: registered new interface driver ums-karma
[   18.468000] usbcore: registered new interface driver ums-sddr09
[   18.508000] usbcore: registered new interface driver ums-sddr55
[   18.548000] usbcore: registered new interface driver ums-usbat
[   18.584000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   24.080000] eth0: link forced UP - 100/full - flow control off/off
[   24.088000] device eth0 entered promiscuous mode
[   24.100000] br-lan: port 1(eth0) entered forwarding state
[   24.104000] br-lan: port 1(eth0) entered forwarding state
[   26.108000] br-lan: port 1(eth0) entered forwarding state
[   35.096000] eth0: no IPv6 routers present
[/spoiler]
¿Y estás seguro de que el wifi no funciona?

Código: [Seleccionar]
[   14.916000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   14.932000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.936000] Registered led device: rt2800pci-phy0::radio
[   14.936000] Registered led device: rt2800pci-phy0::assoc
[   14.936000] Registered led device: rt2800pci-phy0::quality
La tarjeta pci desde luego la detecta. A ver si es problema de la configuración o algo...

EDIT: He leído algo de que gmtii ha hecho cambios para una eeprom.

¿gmtii podrías postear los cambios de tu firmware para que los pueda actualizar al trunk de openwrt?

Saludos!
« Última modificación: 09-07-2012, 21:12 (Lunes) por Noltari »

gmtii

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #326 en: 09-07-2012, 21:15 (Lunes) »
estupendo... te rogaría que probaras esta otra compilación. Si te funciona, pongo la detección automática de MAC y el led wifi y listo.

http://www.mediafire.com/download.php?rz6m8ul0kcsmlzm

Saludos!

buenas,

tool, podrías probar esta otra compilación por favor?

http://www.mediafire.com/?bi29rp33b1tb4d6

Gracias.

Le he dado a escanear, pero no encuentra ninguna wifi. Ni creando un AP.

Hola a todos, hace unos días que estoy trasteando con openwrt y hoy me he agenciado de un cacharro de estos con ralink.

He probado esta compilación y furula correctamente tanto en modo cliente como AP, creo que has dado en el clavo, felicidades.

No tengo cable de serie pero puedo dejar un dmesg por si sirve de algo.

[spoiler=root@OpenWrt:~# dmesg]
add
[    0.408000] device: 'mtdblock1': device_add
[    0.408000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.412000] device: 'mtd2': device_add
[    0.412000] device: 'mtd2ro': device_add
[    0.416000] device: '31:2': device_add
[    0.416000] device: 'mtdblock2': device_add
[    0.416000] mtd: partition "rootfs" set to be root filesystem
[    0.424000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=CA0000
[    0.432000] 0x000000340000-0x000000fe0000 : "rootfs_data"
[    0.436000] device: 'mtd3': device_add
[    0.436000] device: 'mtd3ro': device_add
[    0.440000] device: '31:3': device_add
[    0.440000] device: 'mtdblock3': device_add
[    0.440000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.448000] device: 'mtd4': device_add
[    0.448000] device: 'mtd4ro': device_add
[    0.448000] device: '31:4': device_add
[    0.448000] device: 'mtdblock4': device_add
[    0.452000] 0x000000020000-0x000000fe0000 : "linux"
[    0.456000] device: 'mtd5': device_add
[    0.456000] device: 'mtd5ro': device_add
[    0.456000] device: '31:5': device_add
[    0.460000] device: 'mtdblock5': device_add
[    0.460000] driver: 'physmap-flash.0': driver_bound: bound to device 'physmap-flash'
[    0.460000] bus: 'platform': really_probe: bound device physmap-flash.0 to driver physmap-flash
[    0.460000] bus: 'spi': add driver m25p80
[    0.460000] bus: 'platform': add driver bcm63xx-hsspi
[    0.460000] bus: 'platform': add driver spi_gpio
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (1)
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (2)
[    0.464000] bus: 'platform': add driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet_shared.0 with driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet_shared with device bcm63xx_enet_shared.0
[    0.464000] driver: 'bcm63xx_enet_shared.0': driver_bound: bound to device 'bcm63xx_enet_shared'
[    0.464000] bus: 'platform': really_probe: bound device bcm63xx_enet_shared.0 to driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': add driver bcm63xx_enet
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet.1 with driver bcm63xx_enet
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet with device bcm63xx_enet.1
[    0.464000] device: 'eth0': device_add
[    0.468000] driver: 'bcm63xx_enet.1': driver_bound: bound to device 'bcm63xx_enet'
[    0.468000] bus: 'platform': really_probe: bound device bcm63xx_enet.1 to driver bcm63xx_enet
[    0.468000] bus: 'platform': add driver bcm63xx_enetsw
[    0.472000] bus: 'platform': add driver bcm63xx-wdt
[    0.472000] bus: 'platform': driver_probe_device: matched device bcm63xx-wdt with driver bcm63xx-wdt
[    0.472000] bus: 'platform': really_probe: probing driver bcm63xx-wdt with device bcm63xx-wdt
[    0.472000] device: 'watchdog': device_add
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.476000] driver: 'bcm63xx-wdt': driver_bound: bound to device 'bcm63xx-wdt'
[    0.476000] bus: 'platform': really_probe: bound device bcm63xx-wdt to driver bcm63xx-wdt
[    0.480000] bus: 'platform': add driver leds-gpio
[    0.480000] bus: 'platform': driver_probe_device: matched device leds-gpio.0 with driver leds-gpio
[    0.480000] bus: 'platform': really_probe: probing driver leds-gpio with device leds-gpio.0
[    0.480000] device: 'message': device_add
[    0.480000] Registered led device: message
[    0.480000] device: 'hspa': device_add
[    0.480000] Registered led device: hspa
[    0.480000] device: 'dsl': device_add
[    0.480000] Registered led device: dsl
[    0.480000] device: 'power': device_add
[    0.484000] Registered led device: power
[    0.484000] device: 'all_leds': device_add
[    0.484000] Registered led device: all_leds
[    0.484000] driver: 'leds-gpio.0': driver_bound: bound to device 'leds-gpio'
[    0.484000] bus: 'platform': really_probe: bound device leds-gpio.0 to driver leds-gpio
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.316000] eth0: link forced UP - 100/full - flow control off/off
[    3.492000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.560000] There is already a switch registered on the device 'eth0'
[    5.808000] device class 'input': registering
[    6.032000] Button Hotplug driver version 0.4.1
[   13.584000] Compat-wireless backport release: compat-wireless-2012-06-14
[   13.592000] Backport based on wireless-testing.git master-2012-06-14
[   13.596000] compat.git: wireless-testing.git
[   13.660000] device class 'ieee80211': registering
[   13.660000] Registering platform device 'regulatory.0'. Parent at platform
[   13.660000] device: 'regulatory.0': device_add
[   13.660000] bus: 'platform': add device regulatory.0
[   13.664000] cfg80211: Calling CRDA to update world regulatory domain
[   13.668000] cfg80211: World regulatory domain updated:
[   13.676000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.684000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.692000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.700000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.708000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.716000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.340000] device class 'scsi_host': registering
[   14.344000] bus: 'scsi': registered
[   14.344000] device class 'scsi_device': registering
[   14.344000] SCSI subsystem initialized
[   14.432000] There is already a switch registered on the device 'eth0'
[   14.784000] bus: 'usb': registered
[   14.784000] bus: 'usb': add driver usbfs
[   14.784000] usbcore: registered new interface driver usbfs
[   14.792000] bus: 'usb': add driver hub
[   14.792000] usbcore: registered new interface driver hub
[   14.800000] bus: 'usb': add driver usb
[   14.800000] usbcore: registered new device driver usb
[   15.404000] bus: 'pci': add driver rt2800pci
[   15.404000] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver rt2800pci
[   15.404000] bus: 'pci': really_probe: probing driver rt2800pci with device 0000:00:01.0
[   15.404000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.408000] rt2800pci 0000:00:01.0: enabling bus mastering
[   15.408000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   15.412000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[   15.420000] rt2800pci 0000:00:01.0: firmware: requesting RT3062.eeprom
[   15.420000] device: '0000:00:01.0': device_add
[   15.600000] device: '0000:00:01.0': device_unregister
[   15.600000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3572, rf: 0005, rev: 0223.
[   15.608000] device: 'phy0': device_add
[   15.608000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.612000] device: 'wlan0': device_add
[   15.612000] device: 'rt2800pci-phy0::radio': device_add
[   15.612000] Registered led device: rt2800pci-phy0::radio
[   15.612000] device: 'rt2800pci-phy0::assoc': device_add
[   15.612000] Registered led device: rt2800pci-phy0::assoc
[   15.612000] device: 'rt2800pci-phy0::quality': device_add
[   15.612000] Registered led device: rt2800pci-phy0::quality
[   15.612000] driver: '0000:00:01.0': driver_bound: bound to device 'rt2800pci'
[   15.612000] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver rt2800pci
[   15.800000] bus: 'bcma': registered
[   15.800000] bus: 'pci': add driver bcma-pci-bridge
[   16.500000] device class 'sound': registering
[   17.008000] device: 'timer': device_add
[   17.476000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.908000] device class 'scsi_disk': registering
[   17.908000] bus: 'scsi': add driver sd
[   17.948000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.956000] bus: 'platform': add driver bcm63xx_ehci
[   17.956000] bus: 'platform': driver_probe_device: matched device bcm63xx_ehci.0 with driver bcm63xx_ehci
[   17.956000] bus: 'platform': really_probe: probing driver bcm63xx_ehci with device bcm63xx_ehci.0
[   18.060000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   18.064000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   18.100000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   18.116000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   18.124000] device: 'usb1': device_add
[   18.124000] bus: 'usb': add device usb1
[   18.124000] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[   18.124000] bus: 'usb': really_probe: probing driver usb with device usb1
[   18.124000] device: '1-0:1.0': device_add
[   18.124000] bus: 'usb': add device 1-0:1.0
[   18.124000] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[   18.124000] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[   18.124000] hub 1-0:1.0: USB hub found
[   18.128000] hub 1-0:1.0: 2 ports detected
[   18.132000] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[   18.132000] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[   18.132000] device: 'ep_81': device_add
[   18.132000] driver: 'usb1': driver_bound: bound to device 'usb'
[   18.132000] bus: 'usb': really_probe: bound device usb1 to driver usb
[   18.132000] device: 'ep_00': device_add
[   18.132000] driver: 'bcm63xx_ehci.0': driver_bound: bound to device 'bcm63xx_ehci'
[   18.132000] bus: 'platform': really_probe: bound device bcm63xx_ehci.0 to driver bcm63xx_ehci
[   18.132000] bus: 'pci': add driver ehci_hcd
[   18.328000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   19.032000] bus: 'i2c': registered
[   19.032000] bus: 'i2c': add driver dummy
[   19.064000] i2c /dev entries driver
[   19.064000] device class 'i2c-dev': registering
[   19.240000] bus: 'usb': add driver cdc_acm
[   19.240000] usbcore: registered new interface driver cdc_acm
[   19.244000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.488000] bus: 'usb': add driver snd-usb-audio
[   19.488000] usbcore: registered new interface driver snd-usb-audio
[   19.628000] Initializing USB Mass Storage driver...
[   19.632000] bus: 'usb': add driver usb-storage
[   19.632000] usbcore: registered new interface driver usb-storage
[   19.636000] USB Mass Storage support registered.
[   19.824000] Linux video capture interface: v2.00
[   19.828000] device class 'video4linux': registering
[   20.184000] bus: 'platform': add driver gpio-keys-polled
[   20.188000] bus: 'platform': driver_probe_device: matched device gpio-keys-polled.0 with driver gpio-keys-polled
[   20.188000] bus: 'platform': really_probe: probing driver gpio-keys-polled with device gpio-keys-polled.0
[   20.188000] device: 'input0': device_add
[   20.188000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   20.196000] driver: 'gpio-keys-polled.0': driver_bound: bound to device 'gpio-keys-polled'
[   20.196000] bus: 'platform': really_probe: bound device gpio-keys-polled.0 to driver gpio-keys-polled
[   20.332000] bus: 'usb': add driver uvcvideo
[   20.332000] usbcore: registered new interface driver uvcvideo
[   20.336000] USB Video Class driver (1.1.1)
[   26.580000] device: 'br-lan': device_add
[   26.580000] eth0: link forced UP - 100/full - flow control off/off
[   26.596000] device eth0 entered promiscuous mode
[   26.604000] br-lan: port 1(eth0) entered forwarding state
[   26.608000] br-lan: port 1(eth0) entered forwarding state
[   28.612000] br-lan: port 1(eth0) entered forwarding state
[   50.968000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   50.984000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   50.988000] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   79.668000] device: 'tmp.radio0': device_add
[   79.680000] device: 'tmp.radio0': device_add
[   85.568000] device: 'tmp.radio0': device_add
[   85.592000] device: 'tmp.radio0': device_add
[  127.040000] done.
[  127.044000] JFFS2 notice: (1161) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  155.732000] device: 'tmp.radio0': device_add
[  155.752000] device: 'tmp.radio0': device_add
[  160.692000] device: 'tmp.radio0': device_add
[  160.716000] device: 'tmp.radio0': device_add
[  166.860000] device: 'tmp.radio0': device_add
[  166.884000] device: 'tmp.radio0': device_add
[  176.560000] device: 'tmp.radio0': device_add
[  176.580000] device: 'tmp.radio0': device_add
[  181.476000] device: 'tmp.radio0': device_add
[  181.500000] device: 'tmp.radio0': device_add
[  184.696000] device: 'tmp.radio0': device_add
[  188.464000] device: 'tmp.radio0': device_add
[  188.492000] device: 'tmp.radio0': device_add
[  190.648000] device: 'tmp.radio0': device_add
[  190.668000] device: 'tmp.radio0': device_add
[  195.380000] device: 'tmp.radio0': device_add
[  195.412000] device: 'tmp.radio0': device_add
[  197.024000] device: 'tmp.radio0': device_add
[  200.384000] device: 'tmp.radio0': device_add
[  200.408000] device: 'tmp.radio0': device_add
[  200.964000] device: 'wlan0': device_add
[  202.148000] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'.
[  202.156000] rt2800pci 0000:00:01.0: firmware: requesting rt2860.bin
[  202.156000] device: '0000:00:01.0': device_add
[  202.380000] device: '0000:00:01.0': device_unregister
[  202.380000] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34.
[  205.636000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.648000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.656000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.668000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.724000] device wlan0 entered promiscuous mode
[  208.972000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
[  208.984000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
[  208.992000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
[  209.004000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
[  209.112000] br-lan: port 2(wlan0) entered forwarding state
[  209.116000] br-lan: port 2(wlan0) entered forwarding state
[  209.140000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 1, TXop: 47.
[  209.164000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 1, TXop: 94.
[  209.196000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 6, Aifs: 3, TXop: 0.
[  209.216000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[  211.120000] br-lan: port 2(wlan0) entered forwarding state

[/spoiler]

Si hace falta que haga mas pruebas estoy disponible.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #327 en: 09-07-2012, 21:30 (Lunes) »
A todo esto, ¿alguien podría decirme el color de cada uno de los LEDs?

message -> ?
hspa -> ?
dsl -> ?
power -> ?

El GPIO 6 que danitool definió como "all" imagino que enciende todos los LEDs...

Desconectado geminis_demon

  • Colaborador
  • *
  • Mensajes: 2383
  • Prácticas precisas precisan práctica
Re: OpenWRT en Huawei hg556a
« Respuesta #328 en: 09-07-2012, 22:21 (Lunes) »
estupendo... te rogaría que probaras esta otra compilación. Si te funciona, pongo la detección automática de MAC y el led wifi y listo.

http://www.mediafire.com/download.php?rz6m8ul0kcsmlzm

Saludos!

buenas,

tool, podrías probar esta otra compilación por favor?

http://www.mediafire.com/?bi29rp33b1tb4d6

Gracias.

Le he dado a escanear, pero no encuentra ninguna wifi. Ni creando un AP.

Hola a todos, hace unos días que estoy trasteando con openwrt y hoy me he agenciado de un cacharro de estos con ralink.

He probado esta compilación y furula correctamente tanto en modo cliente como AP, creo que has dado en el clavo, felicidades.

No tengo cable de serie pero puedo dejar un dmesg por si sirve de algo.

[spoiler=root@OpenWrt:~# dmesg]
add
[    0.408000] device: 'mtdblock1': device_add
[    0.408000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.412000] device: 'mtd2': device_add
[    0.412000] device: 'mtd2ro': device_add
[    0.416000] device: '31:2': device_add
[    0.416000] device: 'mtdblock2': device_add
[    0.416000] mtd: partition "rootfs" set to be root filesystem
[    0.424000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=CA0000
[    0.432000] 0x000000340000-0x000000fe0000 : "rootfs_data"
[    0.436000] device: 'mtd3': device_add
[    0.436000] device: 'mtd3ro': device_add
[    0.440000] device: '31:3': device_add
[    0.440000] device: 'mtdblock3': device_add
[    0.440000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.448000] device: 'mtd4': device_add
[    0.448000] device: 'mtd4ro': device_add
[    0.448000] device: '31:4': device_add
[    0.448000] device: 'mtdblock4': device_add
[    0.452000] 0x000000020000-0x000000fe0000 : "linux"
[    0.456000] device: 'mtd5': device_add
[    0.456000] device: 'mtd5ro': device_add
[    0.456000] device: '31:5': device_add
[    0.460000] device: 'mtdblock5': device_add
[    0.460000] driver: 'physmap-flash.0': driver_bound: bound to device 'physmap-flash'
[    0.460000] bus: 'platform': really_probe: bound device physmap-flash.0 to driver physmap-flash
[    0.460000] bus: 'spi': add driver m25p80
[    0.460000] bus: 'platform': add driver bcm63xx-hsspi
[    0.460000] bus: 'platform': add driver spi_gpio
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (1)
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (2)
[    0.464000] bus: 'platform': add driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet_shared.0 with driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet_shared with device bcm63xx_enet_shared.0
[    0.464000] driver: 'bcm63xx_enet_shared.0': driver_bound: bound to device 'bcm63xx_enet_shared'
[    0.464000] bus: 'platform': really_probe: bound device bcm63xx_enet_shared.0 to driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': add driver bcm63xx_enet
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet.1 with driver bcm63xx_enet
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet with device bcm63xx_enet.1
[    0.464000] device: 'eth0': device_add
[    0.468000] driver: 'bcm63xx_enet.1': driver_bound: bound to device 'bcm63xx_enet'
[    0.468000] bus: 'platform': really_probe: bound device bcm63xx_enet.1 to driver bcm63xx_enet
[    0.468000] bus: 'platform': add driver bcm63xx_enetsw
[    0.472000] bus: 'platform': add driver bcm63xx-wdt
[    0.472000] bus: 'platform': driver_probe_device: matched device bcm63xx-wdt with driver bcm63xx-wdt
[    0.472000] bus: 'platform': really_probe: probing driver bcm63xx-wdt with device bcm63xx-wdt
[    0.472000] device: 'watchdog': device_add
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.476000] driver: 'bcm63xx-wdt': driver_bound: bound to device 'bcm63xx-wdt'
[    0.476000] bus: 'platform': really_probe: bound device bcm63xx-wdt to driver bcm63xx-wdt
[    0.480000] bus: 'platform': add driver leds-gpio
[    0.480000] bus: 'platform': driver_probe_device: matched device leds-gpio.0 with driver leds-gpio
[    0.480000] bus: 'platform': really_probe: probing driver leds-gpio with device leds-gpio.0
[    0.480000] device: 'message': device_add
[    0.480000] Registered led device: message
[    0.480000] device: 'hspa': device_add
[    0.480000] Registered led device: hspa
[    0.480000] device: 'dsl': device_add
[    0.480000] Registered led device: dsl
[    0.480000] device: 'power': device_add
[    0.484000] Registered led device: power
[    0.484000] device: 'all_leds': device_add
[    0.484000] Registered led device: all_leds
[    0.484000] driver: 'leds-gpio.0': driver_bound: bound to device 'leds-gpio'
[    0.484000] bus: 'platform': really_probe: bound device leds-gpio.0 to driver leds-gpio
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.316000] eth0: link forced UP - 100/full - flow control off/off
[    3.492000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.560000] There is already a switch registered on the device 'eth0'
[    5.808000] device class 'input': registering
[    6.032000] Button Hotplug driver version 0.4.1
[   13.584000] Compat-wireless backport release: compat-wireless-2012-06-14
[   13.592000] Backport based on wireless-testing.git master-2012-06-14
[   13.596000] compat.git: wireless-testing.git
[   13.660000] device class 'ieee80211': registering
[   13.660000] Registering platform device 'regulatory.0'. Parent at platform
[   13.660000] device: 'regulatory.0': device_add
[   13.660000] bus: 'platform': add device regulatory.0
[   13.664000] cfg80211: Calling CRDA to update world regulatory domain
[   13.668000] cfg80211: World regulatory domain updated:
[   13.676000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.684000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.692000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.700000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.708000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.716000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.340000] device class 'scsi_host': registering
[   14.344000] bus: 'scsi': registered
[   14.344000] device class 'scsi_device': registering
[   14.344000] SCSI subsystem initialized
[   14.432000] There is already a switch registered on the device 'eth0'
[   14.784000] bus: 'usb': registered
[   14.784000] bus: 'usb': add driver usbfs
[   14.784000] usbcore: registered new interface driver usbfs
[   14.792000] bus: 'usb': add driver hub
[   14.792000] usbcore: registered new interface driver hub
[   14.800000] bus: 'usb': add driver usb
[   14.800000] usbcore: registered new device driver usb
[   15.404000] bus: 'pci': add driver rt2800pci
[   15.404000] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver rt2800pci
[   15.404000] bus: 'pci': really_probe: probing driver rt2800pci with device 0000:00:01.0
[   15.404000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.408000] rt2800pci 0000:00:01.0: enabling bus mastering
[   15.408000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   15.412000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[   15.420000] rt2800pci 0000:00:01.0: firmware: requesting RT3062.eeprom
[   15.420000] device: '0000:00:01.0': device_add
[   15.600000] device: '0000:00:01.0': device_unregister
[   15.600000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3572, rf: 0005, rev: 0223.
[   15.608000] device: 'phy0': device_add
[   15.608000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.612000] device: 'wlan0': device_add
[   15.612000] device: 'rt2800pci-phy0::radio': device_add
[   15.612000] Registered led device: rt2800pci-phy0::radio
[   15.612000] device: 'rt2800pci-phy0::assoc': device_add
[   15.612000] Registered led device: rt2800pci-phy0::assoc
[   15.612000] device: 'rt2800pci-phy0::quality': device_add
[   15.612000] Registered led device: rt2800pci-phy0::quality
[   15.612000] driver: '0000:00:01.0': driver_bound: bound to device 'rt2800pci'
[   15.612000] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver rt2800pci
[   15.800000] bus: 'bcma': registered
[   15.800000] bus: 'pci': add driver bcma-pci-bridge
[   16.500000] device class 'sound': registering
[   17.008000] device: 'timer': device_add
[   17.476000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.908000] device class 'scsi_disk': registering
[   17.908000] bus: 'scsi': add driver sd
[   17.948000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.956000] bus: 'platform': add driver bcm63xx_ehci
[   17.956000] bus: 'platform': driver_probe_device: matched device bcm63xx_ehci.0 with driver bcm63xx_ehci
[   17.956000] bus: 'platform': really_probe: probing driver bcm63xx_ehci with device bcm63xx_ehci.0
[   18.060000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   18.064000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   18.100000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   18.116000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   18.124000] device: 'usb1': device_add
[   18.124000] bus: 'usb': add device usb1
[   18.124000] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[   18.124000] bus: 'usb': really_probe: probing driver usb with device usb1
[   18.124000] device: '1-0:1.0': device_add
[   18.124000] bus: 'usb': add device 1-0:1.0
[   18.124000] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[   18.124000] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[   18.124000] hub 1-0:1.0: USB hub found
[   18.128000] hub 1-0:1.0: 2 ports detected
[   18.132000] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[   18.132000] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[   18.132000] device: 'ep_81': device_add
[   18.132000] driver: 'usb1': driver_bound: bound to device 'usb'
[   18.132000] bus: 'usb': really_probe: bound device usb1 to driver usb
[   18.132000] device: 'ep_00': device_add
[   18.132000] driver: 'bcm63xx_ehci.0': driver_bound: bound to device 'bcm63xx_ehci'
[   18.132000] bus: 'platform': really_probe: bound device bcm63xx_ehci.0 to driver bcm63xx_ehci
[   18.132000] bus: 'pci': add driver ehci_hcd
[   18.328000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   19.032000] bus: 'i2c': registered
[   19.032000] bus: 'i2c': add driver dummy
[   19.064000] i2c /dev entries driver
[   19.064000] device class 'i2c-dev': registering
[   19.240000] bus: 'usb': add driver cdc_acm
[   19.240000] usbcore: registered new interface driver cdc_acm
[   19.244000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.488000] bus: 'usb': add driver snd-usb-audio
[   19.488000] usbcore: registered new interface driver snd-usb-audio
[   19.628000] Initializing USB Mass Storage driver...
[   19.632000] bus: 'usb': add driver usb-storage
[   19.632000] usbcore: registered new interface driver usb-storage
[   19.636000] USB Mass Storage support registered.
[   19.824000] Linux video capture interface: v2.00
[   19.828000] device class 'video4linux': registering
[   20.184000] bus: 'platform': add driver gpio-keys-polled
[   20.188000] bus: 'platform': driver_probe_device: matched device gpio-keys-polled.0 with driver gpio-keys-polled
[   20.188000] bus: 'platform': really_probe: probing driver gpio-keys-polled with device gpio-keys-polled.0
[   20.188000] device: 'input0': device_add
[   20.188000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   20.196000] driver: 'gpio-keys-polled.0': driver_bound: bound to device 'gpio-keys-polled'
[   20.196000] bus: 'platform': really_probe: bound device gpio-keys-polled.0 to driver gpio-keys-polled
[   20.332000] bus: 'usb': add driver uvcvideo
[   20.332000] usbcore: registered new interface driver uvcvideo
[   20.336000] USB Video Class driver (1.1.1)
[   26.580000] device: 'br-lan': device_add
[   26.580000] eth0: link forced UP - 100/full - flow control off/off
[   26.596000] device eth0 entered promiscuous mode
[   26.604000] br-lan: port 1(eth0) entered forwarding state
[   26.608000] br-lan: port 1(eth0) entered forwarding state
[   28.612000] br-lan: port 1(eth0) entered forwarding state
[   50.968000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   50.984000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   50.988000] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   79.668000] device: 'tmp.radio0': device_add
[   79.680000] device: 'tmp.radio0': device_add
[   85.568000] device: 'tmp.radio0': device_add
[   85.592000] device: 'tmp.radio0': device_add
[  127.040000] done.
[  127.044000] JFFS2 notice: (1161) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  155.732000] device: 'tmp.radio0': device_add
[  155.752000] device: 'tmp.radio0': device_add
[  160.692000] device: 'tmp.radio0': device_add
[  160.716000] device: 'tmp.radio0': device_add
[  166.860000] device: 'tmp.radio0': device_add
[  166.884000] device: 'tmp.radio0': device_add
[  176.560000] device: 'tmp.radio0': device_add
[  176.580000] device: 'tmp.radio0': device_add
[  181.476000] device: 'tmp.radio0': device_add
[  181.500000] device: 'tmp.radio0': device_add
[  184.696000] device: 'tmp.radio0': device_add
[  188.464000] device: 'tmp.radio0': device_add
[  188.492000] device: 'tmp.radio0': device_add
[  190.648000] device: 'tmp.radio0': device_add
[  190.668000] device: 'tmp.radio0': device_add
[  195.380000] device: 'tmp.radio0': device_add
[  195.412000] device: 'tmp.radio0': device_add
[  197.024000] device: 'tmp.radio0': device_add
[  200.384000] device: 'tmp.radio0': device_add
[  200.408000] device: 'tmp.radio0': device_add
[  200.964000] device: 'wlan0': device_add
[  202.148000] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'.
[  202.156000] rt2800pci 0000:00:01.0: firmware: requesting rt2860.bin
[  202.156000] device: '0000:00:01.0': device_add
[  202.380000] device: '0000:00:01.0': device_unregister
[  202.380000] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34.
[  205.636000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.648000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.656000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.668000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.724000] device wlan0 entered promiscuous mode
[  208.972000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
[  208.984000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
[  208.992000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
[  209.004000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
[  209.112000] br-lan: port 2(wlan0) entered forwarding state
[  209.116000] br-lan: port 2(wlan0) entered forwarding state
[  209.140000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 1, TXop: 47.
[  209.164000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 1, TXop: 94.
[  209.196000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 6, Aifs: 3, TXop: 0.
[  209.216000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[  211.120000] br-lan: port 2(wlan0) entered forwarding state

[/spoiler]

Si hace falta que haga mas pruebas estoy disponible.

Probado y funcionando OK, nose que diferencia tiene con respecto al anterior porque funciona igual de bien, modo cliente y AP, eres un crack.

[spoiler=dmesg]
000] 0x000000020100-0x000000120000 : "kernel"
[    0.392000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.404000] device: 'mtd1': device_add
[    0.404000] device: 'mtd1ro': device_add
[    0.404000] device: '31:1': device_add
[    0.408000] device: 'mtdblock1': device_add
[    0.408000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.412000] device: 'mtd2': device_add
[    0.412000] device: 'mtd2ro': device_add
[    0.416000] device: '31:2': device_add
[    0.416000] device: 'mtdblock2': device_add
[    0.416000] mtd: partition "rootfs" set to be root filesystem
[    0.424000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=CA0000
[    0.432000] 0x000000340000-0x000000fe0000 : "rootfs_data"
[    0.436000] device: 'mtd3': device_add
[    0.436000] device: 'mtd3ro': device_add
[    0.440000] device: '31:3': device_add
[    0.440000] device: 'mtdblock3': device_add
[    0.440000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.448000] device: 'mtd4': device_add
[    0.448000] device: 'mtd4ro': device_add
[    0.448000] device: '31:4': device_add
[    0.448000] device: 'mtdblock4': device_add
[    0.452000] 0x000000020000-0x000000fe0000 : "linux"
[    0.456000] device: 'mtd5': device_add
[    0.456000] device: 'mtd5ro': device_add
[    0.456000] device: '31:5': device_add
[    0.460000] device: 'mtdblock5': device_add
[    0.460000] driver: 'physmap-flash.0': driver_bound: bound to device 'physmap-flash'
[    0.460000] bus: 'platform': really_probe: bound device physmap-flash.0 to driver physmap-flash
[    0.460000] bus: 'spi': add driver m25p80
[    0.460000] bus: 'platform': add driver bcm63xx-hsspi
[    0.460000] bus: 'platform': add driver spi_gpio
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (1)
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (2)
[    0.464000] bus: 'platform': add driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet_shared.0 with driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet_shared with device bcm63xx_enet_shared.0
[    0.464000] driver: 'bcm63xx_enet_shared.0': driver_bound: bound to device 'bcm63xx_enet_shared'
[    0.464000] bus: 'platform': really_probe: bound device bcm63xx_enet_shared.0 to driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': add driver bcm63xx_enet
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet.1 with driver bcm63xx_enet
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet with device bcm63xx_enet.1
[    0.464000] device: 'eth0': device_add
[    0.468000] driver: 'bcm63xx_enet.1': driver_bound: bound to device 'bcm63xx_enet'
[    0.468000] bus: 'platform': really_probe: bound device bcm63xx_enet.1 to driver bcm63xx_enet
[    0.468000] bus: 'platform': add driver bcm63xx_enetsw
[    0.472000] bus: 'platform': add driver bcm63xx-wdt
[    0.472000] bus: 'platform': driver_probe_device: matched device bcm63xx-wdt with driver bcm63xx-wdt
[    0.472000] bus: 'platform': really_probe: probing driver bcm63xx-wdt with device bcm63xx-wdt
[    0.472000] device: 'watchdog': device_add
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.476000] driver: 'bcm63xx-wdt': driver_bound: bound to device 'bcm63xx-wdt'
[    0.476000] bus: 'platform': really_probe: bound device bcm63xx-wdt to driver bcm63xx-wdt
[    0.480000] bus: 'platform': add driver leds-gpio
[    0.480000] bus: 'platform': driver_probe_device: matched device leds-gpio.0 with driver leds-gpio
[    0.480000] bus: 'platform': really_probe: probing driver leds-gpio with device leds-gpio.0
[    0.480000] device: 'message': device_add
[    0.480000] Registered led device: message
[    0.480000] device: 'hspa': device_add
[    0.480000] Registered led device: hspa
[    0.480000] device: 'dsl': device_add
[    0.480000] Registered led device: dsl
[    0.480000] device: 'power': device_add
[    0.484000] Registered led device: power
[    0.484000] device: 'all_leds': device_add
[    0.484000] Registered led device: all_leds
[    0.484000] driver: 'leds-gpio.0': driver_bound: bound to device 'leds-gpio'
[    0.484000] bus: 'platform': really_probe: bound device leds-gpio.0 to driver leds-gpio
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.308000] eth0: link forced UP - 100/full - flow control off/off
[    3.488000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.556000] There is already a switch registered on the device 'eth0'
[    5.804000] device class 'input': registering
[    6.024000] Button Hotplug driver version 0.4.1
[   13.580000] Compat-wireless backport release: compat-wireless-2012-06-14
[   13.588000] Backport based on wireless-testing.git master-2012-06-14
[   13.596000] compat.git: wireless-testing.git
[   13.656000] device class 'ieee80211': registering
[   13.656000] Registering platform device 'regulatory.0'. Parent at platform
[   13.656000] device: 'regulatory.0': device_add
[   13.656000] bus: 'platform': add device regulatory.0
[   13.660000] cfg80211: Calling CRDA to update world regulatory domain
[   13.664000] cfg80211: World regulatory domain updated:
[   13.672000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.680000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.688000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.696000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.704000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.712000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.340000] device class 'scsi_host': registering
[   14.340000] bus: 'scsi': registered
[   14.340000] device class 'scsi_device': registering
[   14.340000] SCSI subsystem initialized
[   14.428000] There is already a switch registered on the device 'eth0'
[   14.784000] bus: 'usb': registered
[   14.784000] bus: 'usb': add driver usbfs
[   14.784000] usbcore: registered new interface driver usbfs
[   14.788000] bus: 'usb': add driver hub
[   14.788000] usbcore: registered new interface driver hub
[   14.796000] bus: 'usb': add driver usb
[   14.796000] usbcore: registered new device driver usb
[   15.404000] bus: 'pci': add driver rt2800pci
[   15.404000] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver rt2800pci
[   15.404000] bus: 'pci': really_probe: probing driver rt2800pci with device 0000:00:01.0
[   15.404000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.408000] rt2800pci 0000:00:01.0: enabling bus mastering
[   15.412000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   15.412000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[   15.420000] rt2800pci 0000:00:01.0: firmware: requesting RT3062.eeprom
[   15.420000] device: '0000:00:01.0': device_add
[   15.600000] device: '0000:00:01.0': device_unregister
[   15.600000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3572, rf: 0008, rev: 0223.
[   15.608000] device: 'phy0': device_add
[   15.612000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.612000] device: 'wlan0': device_add
[   15.612000] device: 'rt2800pci-phy0::radio': device_add
[   15.612000] Registered led device: rt2800pci-phy0::radio
[   15.612000] device: 'rt2800pci-phy0::assoc': device_add
[   15.612000] Registered led device: rt2800pci-phy0::assoc
[   15.612000] device: 'rt2800pci-phy0::quality': device_add
[   15.612000] Registered led device: rt2800pci-phy0::quality
[   15.612000] driver: '0000:00:01.0': driver_bound: bound to device 'rt2800pci'
[   15.612000] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver rt2800pci
[   15.800000] bus: 'bcma': registered
[   15.800000] bus: 'pci': add driver bcma-pci-bridge
[   16.500000] device class 'sound': registering
[   17.008000] device: 'timer': device_add
[   17.476000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.912000] device class 'scsi_disk': registering
[   17.912000] bus: 'scsi': add driver sd
[   17.952000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.956000] bus: 'platform': add driver bcm63xx_ehci
[   17.956000] bus: 'platform': driver_probe_device: matched device bcm63xx_ehci.0 with driver bcm63xx_ehci
[   17.956000] bus: 'platform': really_probe: probing driver bcm63xx_ehci with device bcm63xx_ehci.0
[   18.060000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   18.064000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   18.100000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   18.116000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   18.124000] device: 'usb1': device_add
[   18.124000] bus: 'usb': add device usb1
[   18.124000] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[   18.124000] bus: 'usb': really_probe: probing driver usb with device usb1
[   18.124000] device: '1-0:1.0': device_add
[   18.124000] bus: 'usb': add device 1-0:1.0
[   18.124000] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[   18.124000] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[   18.124000] hub 1-0:1.0: USB hub found
[   18.128000] hub 1-0:1.0: 2 ports detected
[   18.132000] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[   18.132000] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[   18.132000] device: 'ep_81': device_add
[   18.132000] driver: 'usb1': driver_bound: bound to device 'usb'
[   18.132000] bus: 'usb': really_probe: bound device usb1 to driver usb
[   18.132000] device: 'ep_00': device_add
[   18.132000] driver: 'bcm63xx_ehci.0': driver_bound: bound to device 'bcm63xx_ehci'
[   18.132000] bus: 'platform': really_probe: bound device bcm63xx_ehci.0 to driver bcm63xx_ehci
[   18.132000] bus: 'pci': add driver ehci_hcd
[   18.328000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   19.028000] bus: 'i2c': registered
[   19.028000] bus: 'i2c': add driver dummy
[   19.060000] i2c /dev entries driver
[   19.064000] device class 'i2c-dev': registering
[   19.240000] bus: 'usb': add driver cdc_acm
[   19.240000] usbcore: registered new interface driver cdc_acm
[   19.244000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.488000] bus: 'usb': add driver snd-usb-audio
[   19.488000] usbcore: registered new interface driver snd-usb-audio
[   19.628000] Initializing USB Mass Storage driver...
[   19.632000] bus: 'usb': add driver usb-storage
[   19.632000] usbcore: registered new interface driver usb-storage
[   19.640000] USB Mass Storage support registered.
[   19.824000] Linux video capture interface: v2.00
[   19.828000] device class 'video4linux': registering
[   20.188000] bus: 'platform': add driver gpio-keys-polled
[   20.188000] bus: 'platform': driver_probe_device: matched device gpio-keys-polled.0 with driver gpio-keys-polled
[   20.188000] bus: 'platform': really_probe: probing driver gpio-keys-polled with device gpio-keys-polled.0
[   20.188000] device: 'input0': device_add
[   20.188000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   20.196000] driver: 'gpio-keys-polled.0': driver_bound: bound to device 'gpio-keys-polled'
[   20.196000] bus: 'platform': really_probe: bound device gpio-keys-polled.0 to driver gpio-keys-polled
[   20.332000] bus: 'usb': add driver uvcvideo
[   20.332000] usbcore: registered new interface driver uvcvideo
[   20.340000] USB Video Class driver (1.1.1)
[   26.572000] device: 'br-lan': device_add
[   26.576000] eth0: link forced UP - 100/full - flow control off/off
[   26.584000] device eth0 entered promiscuous mode
[   26.592000] br-lan: port 1(eth0) entered forwarding state
[   26.596000] br-lan: port 1(eth0) entered forwarding state
[   28.600000] br-lan: port 1(eth0) entered forwarding state
[   50.692000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   50.708000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   50.712000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[  125.200000] JFFS2 notice: (1165) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  163.272000] device: 'tmp.radio0': device_add
[  163.292000] device: 'tmp.radio0': device_add
[  167.340000] device: 'tmp.radio0': device_add
[  167.360000] device: 'tmp.radio0': device_add
[  173.760000] device: 'tmp.radio0': device_add
[  173.784000] device: 'tmp.radio0': device_add
[  178.592000] device: 'tmp.radio0': device_add
[  178.612000] device: 'tmp.radio0': device_add
[  182.420000] device: 'tmp.radio0': device_add
[  184.772000] device: 'tmp.radio0': device_add
[  184.804000] device: 'tmp.radio0': device_add
[  188.116000] device: 'tmp.radio0': device_add
[  188.128000] device: 'tmp.radio0': device_add
[  193.484000] device: 'tmp.radio0': device_add
[  193.520000] device: 'tmp.radio0': device_add
[  194.592000] device: 'tmp.radio0': device_add
[  198.304000] device: 'tmp.radio0': device_add
[  198.332000] device: 'tmp.radio0': device_add
[  198.360000] device: 'wlan0': device_add
[  199.696000] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'.
[  199.704000] rt2800pci 0000:00:01.0: firmware: requesting rt2860.bin
[  199.704000] device: '0000:00:01.0': device_add
[  199.932000] device: '0000:00:01.0': device_unregister
[  199.932000] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34.
[  200.092000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  200.104000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  200.112000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  200.124000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  200.172000] device wlan0 entered promiscuous mode
[  200.332000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
[  200.344000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
[  200.352000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
[  200.364000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
[  200.440000] br-lan: port 2(wlan0) entered forwarding state
[  200.444000] br-lan: port 2(wlan0) entered forwarding state
[  200.460000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 1, TXop: 47.
[  200.496000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 1, TXop: 94.
[  200.520000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 6, Aifs: 3, TXop: 0.
[  200.544000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[  202.448000] br-lan: port 2(wlan0) entered forwarding state

[/spoiler]

A todo esto, ¿alguien podría decirme el color de cada uno de los LEDs?

message -> ?
hspa -> ?
dsl -> ?
power -> ?

El GPIO 6 que danitool definió como "all" imagino que enciende todos los LEDs...

Todos los leds son rojos (o eso creo), yo solo veo encendido el de power y el de wifi cuando está el wifi activado, pero cuando dejo pulsado el botón reset se encienden todos y todos son rojos.

No se si es eso lo que estas preguntando o te refieres a otra cosa.

La luz cree que viaja más rápido que cualquier otra cosa, pero se equivoca; da lo mismo lo rápido que pueda viajar, porque al final, la luz descubre que la oscuridad ha llegado antes que ella, y la está esperando.

tool

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #329 en: 09-07-2012, 22:43 (Lunes) »
Perfecto, posteando desde el Ralink!

Parece que tiene "menos potencia wifi", que el Atheros.

A ver si estos días le doy más pruebas, y pruebo el modo cliente transparente, que no funcionaba en Atheros (relayd).

Gracias a todos por el currele!


Ahora arreglar la detección de mac, y router perfecto!
« Última modificación: 09-07-2012, 22:45 (Lunes) por tool »

gmtii

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #330 en: 09-07-2012, 22:51 (Lunes) »
muchas gracias por las pruebas!

La diferencia es que el primero suponía que el chip RF era un RF3020 0x5 que es un 1TR1, y ahora un 0x8  RF3022 que es 2T2R, en resumen, que usa 2 canales y coge los 300 mbps  ;D

He hablado con Noltari que se ha currado la parte dura con su parche para integrar el soporte del Ralink  y tener un firmware único para todos los modelos de HG556  >:(

 

estupendo... te rogaría que probaras esta otra compilación. Si te funciona, pongo la detección automática de MAC y el led wifi y listo.

http://www.mediafire.com/download.php?rz6m8ul0kcsmlzm

Saludos!

buenas,

tool, podrías probar esta otra compilación por favor?

http://www.mediafire.com/?bi29rp33b1tb4d6

Gracias.

Le he dado a escanear, pero no encuentra ninguna wifi. Ni creando un AP.

Hola a todos, hace unos días que estoy trasteando con openwrt y hoy me he agenciado de un cacharro de estos con ralink.

He probado esta compilación y furula correctamente tanto en modo cliente como AP, creo que has dado en el clavo, felicidades.

No tengo cable de serie pero puedo dejar un dmesg por si sirve de algo.

[spoiler=root@OpenWrt:~# dmesg]
add
[    0.408000] device: 'mtdblock1': device_add
[    0.408000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.412000] device: 'mtd2': device_add
[    0.412000] device: 'mtd2ro': device_add
[    0.416000] device: '31:2': device_add
[    0.416000] device: 'mtdblock2': device_add
[    0.416000] mtd: partition "rootfs" set to be root filesystem
[    0.424000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=CA0000
[    0.432000] 0x000000340000-0x000000fe0000 : "rootfs_data"
[    0.436000] device: 'mtd3': device_add
[    0.436000] device: 'mtd3ro': device_add
[    0.440000] device: '31:3': device_add
[    0.440000] device: 'mtdblock3': device_add
[    0.440000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.448000] device: 'mtd4': device_add
[    0.448000] device: 'mtd4ro': device_add
[    0.448000] device: '31:4': device_add
[    0.448000] device: 'mtdblock4': device_add
[    0.452000] 0x000000020000-0x000000fe0000 : "linux"
[    0.456000] device: 'mtd5': device_add
[    0.456000] device: 'mtd5ro': device_add
[    0.456000] device: '31:5': device_add
[    0.460000] device: 'mtdblock5': device_add
[    0.460000] driver: 'physmap-flash.0': driver_bound: bound to device 'physmap-flash'
[    0.460000] bus: 'platform': really_probe: bound device physmap-flash.0 to driver physmap-flash
[    0.460000] bus: 'spi': add driver m25p80
[    0.460000] bus: 'platform': add driver bcm63xx-hsspi
[    0.460000] bus: 'platform': add driver spi_gpio
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (1)
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (2)
[    0.464000] bus: 'platform': add driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet_shared.0 with driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet_shared with device bcm63xx_enet_shared.0
[    0.464000] driver: 'bcm63xx_enet_shared.0': driver_bound: bound to device 'bcm63xx_enet_shared'
[    0.464000] bus: 'platform': really_probe: bound device bcm63xx_enet_shared.0 to driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': add driver bcm63xx_enet
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet.1 with driver bcm63xx_enet
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet with device bcm63xx_enet.1
[    0.464000] device: 'eth0': device_add
[    0.468000] driver: 'bcm63xx_enet.1': driver_bound: bound to device 'bcm63xx_enet'
[    0.468000] bus: 'platform': really_probe: bound device bcm63xx_enet.1 to driver bcm63xx_enet
[    0.468000] bus: 'platform': add driver bcm63xx_enetsw
[    0.472000] bus: 'platform': add driver bcm63xx-wdt
[    0.472000] bus: 'platform': driver_probe_device: matched device bcm63xx-wdt with driver bcm63xx-wdt
[    0.472000] bus: 'platform': really_probe: probing driver bcm63xx-wdt with device bcm63xx-wdt
[    0.472000] device: 'watchdog': device_add
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.476000] driver: 'bcm63xx-wdt': driver_bound: bound to device 'bcm63xx-wdt'
[    0.476000] bus: 'platform': really_probe: bound device bcm63xx-wdt to driver bcm63xx-wdt
[    0.480000] bus: 'platform': add driver leds-gpio
[    0.480000] bus: 'platform': driver_probe_device: matched device leds-gpio.0 with driver leds-gpio
[    0.480000] bus: 'platform': really_probe: probing driver leds-gpio with device leds-gpio.0
[    0.480000] device: 'message': device_add
[    0.480000] Registered led device: message
[    0.480000] device: 'hspa': device_add
[    0.480000] Registered led device: hspa
[    0.480000] device: 'dsl': device_add
[    0.480000] Registered led device: dsl
[    0.480000] device: 'power': device_add
[    0.484000] Registered led device: power
[    0.484000] device: 'all_leds': device_add
[    0.484000] Registered led device: all_leds
[    0.484000] driver: 'leds-gpio.0': driver_bound: bound to device 'leds-gpio'
[    0.484000] bus: 'platform': really_probe: bound device leds-gpio.0 to driver leds-gpio
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.316000] eth0: link forced UP - 100/full - flow control off/off
[    3.492000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.560000] There is already a switch registered on the device 'eth0'
[    5.808000] device class 'input': registering
[    6.032000] Button Hotplug driver version 0.4.1
[   13.584000] Compat-wireless backport release: compat-wireless-2012-06-14
[   13.592000] Backport based on wireless-testing.git master-2012-06-14
[   13.596000] compat.git: wireless-testing.git
[   13.660000] device class 'ieee80211': registering
[   13.660000] Registering platform device 'regulatory.0'. Parent at platform
[   13.660000] device: 'regulatory.0': device_add
[   13.660000] bus: 'platform': add device regulatory.0
[   13.664000] cfg80211: Calling CRDA to update world regulatory domain
[   13.668000] cfg80211: World regulatory domain updated:
[   13.676000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.684000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.692000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.700000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.708000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.716000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.340000] device class 'scsi_host': registering
[   14.344000] bus: 'scsi': registered
[   14.344000] device class 'scsi_device': registering
[   14.344000] SCSI subsystem initialized
[   14.432000] There is already a switch registered on the device 'eth0'
[   14.784000] bus: 'usb': registered
[   14.784000] bus: 'usb': add driver usbfs
[   14.784000] usbcore: registered new interface driver usbfs
[   14.792000] bus: 'usb': add driver hub
[   14.792000] usbcore: registered new interface driver hub
[   14.800000] bus: 'usb': add driver usb
[   14.800000] usbcore: registered new device driver usb
[   15.404000] bus: 'pci': add driver rt2800pci
[   15.404000] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver rt2800pci
[   15.404000] bus: 'pci': really_probe: probing driver rt2800pci with device 0000:00:01.0
[   15.404000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.408000] rt2800pci 0000:00:01.0: enabling bus mastering
[   15.408000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   15.412000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[   15.420000] rt2800pci 0000:00:01.0: firmware: requesting RT3062.eeprom
[   15.420000] device: '0000:00:01.0': device_add
[   15.600000] device: '0000:00:01.0': device_unregister
[   15.600000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3572, rf: 0005, rev: 0223.
[   15.608000] device: 'phy0': device_add
[   15.608000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.612000] device: 'wlan0': device_add
[   15.612000] device: 'rt2800pci-phy0::radio': device_add
[   15.612000] Registered led device: rt2800pci-phy0::radio
[   15.612000] device: 'rt2800pci-phy0::assoc': device_add
[   15.612000] Registered led device: rt2800pci-phy0::assoc
[   15.612000] device: 'rt2800pci-phy0::quality': device_add
[   15.612000] Registered led device: rt2800pci-phy0::quality
[   15.612000] driver: '0000:00:01.0': driver_bound: bound to device 'rt2800pci'
[   15.612000] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver rt2800pci
[   15.800000] bus: 'bcma': registered
[   15.800000] bus: 'pci': add driver bcma-pci-bridge
[   16.500000] device class 'sound': registering
[   17.008000] device: 'timer': device_add
[   17.476000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.908000] device class 'scsi_disk': registering
[   17.908000] bus: 'scsi': add driver sd
[   17.948000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.956000] bus: 'platform': add driver bcm63xx_ehci
[   17.956000] bus: 'platform': driver_probe_device: matched device bcm63xx_ehci.0 with driver bcm63xx_ehci
[   17.956000] bus: 'platform': really_probe: probing driver bcm63xx_ehci with device bcm63xx_ehci.0
[   18.060000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   18.064000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   18.100000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   18.116000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   18.124000] device: 'usb1': device_add
[   18.124000] bus: 'usb': add device usb1
[   18.124000] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[   18.124000] bus: 'usb': really_probe: probing driver usb with device usb1
[   18.124000] device: '1-0:1.0': device_add
[   18.124000] bus: 'usb': add device 1-0:1.0
[   18.124000] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[   18.124000] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[   18.124000] hub 1-0:1.0: USB hub found
[   18.128000] hub 1-0:1.0: 2 ports detected
[   18.132000] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[   18.132000] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[   18.132000] device: 'ep_81': device_add
[   18.132000] driver: 'usb1': driver_bound: bound to device 'usb'
[   18.132000] bus: 'usb': really_probe: bound device usb1 to driver usb
[   18.132000] device: 'ep_00': device_add
[   18.132000] driver: 'bcm63xx_ehci.0': driver_bound: bound to device 'bcm63xx_ehci'
[   18.132000] bus: 'platform': really_probe: bound device bcm63xx_ehci.0 to driver bcm63xx_ehci
[   18.132000] bus: 'pci': add driver ehci_hcd
[   18.328000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   19.032000] bus: 'i2c': registered
[   19.032000] bus: 'i2c': add driver dummy
[   19.064000] i2c /dev entries driver
[   19.064000] device class 'i2c-dev': registering
[   19.240000] bus: 'usb': add driver cdc_acm
[   19.240000] usbcore: registered new interface driver cdc_acm
[   19.244000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.488000] bus: 'usb': add driver snd-usb-audio
[   19.488000] usbcore: registered new interface driver snd-usb-audio
[   19.628000] Initializing USB Mass Storage driver...
[   19.632000] bus: 'usb': add driver usb-storage
[   19.632000] usbcore: registered new interface driver usb-storage
[   19.636000] USB Mass Storage support registered.
[   19.824000] Linux video capture interface: v2.00
[   19.828000] device class 'video4linux': registering
[   20.184000] bus: 'platform': add driver gpio-keys-polled
[   20.188000] bus: 'platform': driver_probe_device: matched device gpio-keys-polled.0 with driver gpio-keys-polled
[   20.188000] bus: 'platform': really_probe: probing driver gpio-keys-polled with device gpio-keys-polled.0
[   20.188000] device: 'input0': device_add
[   20.188000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   20.196000] driver: 'gpio-keys-polled.0': driver_bound: bound to device 'gpio-keys-polled'
[   20.196000] bus: 'platform': really_probe: bound device gpio-keys-polled.0 to driver gpio-keys-polled
[   20.332000] bus: 'usb': add driver uvcvideo
[   20.332000] usbcore: registered new interface driver uvcvideo
[   20.336000] USB Video Class driver (1.1.1)
[   26.580000] device: 'br-lan': device_add
[   26.580000] eth0: link forced UP - 100/full - flow control off/off
[   26.596000] device eth0 entered promiscuous mode
[   26.604000] br-lan: port 1(eth0) entered forwarding state
[   26.608000] br-lan: port 1(eth0) entered forwarding state
[   28.612000] br-lan: port 1(eth0) entered forwarding state
[   50.968000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   50.984000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   50.988000] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   79.668000] device: 'tmp.radio0': device_add
[   79.680000] device: 'tmp.radio0': device_add
[   85.568000] device: 'tmp.radio0': device_add
[   85.592000] device: 'tmp.radio0': device_add
[  127.040000] done.
[  127.044000] JFFS2 notice: (1161) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  155.732000] device: 'tmp.radio0': device_add
[  155.752000] device: 'tmp.radio0': device_add
[  160.692000] device: 'tmp.radio0': device_add
[  160.716000] device: 'tmp.radio0': device_add
[  166.860000] device: 'tmp.radio0': device_add
[  166.884000] device: 'tmp.radio0': device_add
[  176.560000] device: 'tmp.radio0': device_add
[  176.580000] device: 'tmp.radio0': device_add
[  181.476000] device: 'tmp.radio0': device_add
[  181.500000] device: 'tmp.radio0': device_add
[  184.696000] device: 'tmp.radio0': device_add
[  188.464000] device: 'tmp.radio0': device_add
[  188.492000] device: 'tmp.radio0': device_add
[  190.648000] device: 'tmp.radio0': device_add
[  190.668000] device: 'tmp.radio0': device_add
[  195.380000] device: 'tmp.radio0': device_add
[  195.412000] device: 'tmp.radio0': device_add
[  197.024000] device: 'tmp.radio0': device_add
[  200.384000] device: 'tmp.radio0': device_add
[  200.408000] device: 'tmp.radio0': device_add
[  200.964000] device: 'wlan0': device_add
[  202.148000] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'.
[  202.156000] rt2800pci 0000:00:01.0: firmware: requesting rt2860.bin
[  202.156000] device: '0000:00:01.0': device_add
[  202.380000] device: '0000:00:01.0': device_unregister
[  202.380000] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34.
[  205.636000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.648000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.656000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.668000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  205.724000] device wlan0 entered promiscuous mode
[  208.972000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
[  208.984000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
[  208.992000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
[  209.004000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
[  209.112000] br-lan: port 2(wlan0) entered forwarding state
[  209.116000] br-lan: port 2(wlan0) entered forwarding state
[  209.140000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 1, TXop: 47.
[  209.164000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 1, TXop: 94.
[  209.196000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 6, Aifs: 3, TXop: 0.
[  209.216000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[  211.120000] br-lan: port 2(wlan0) entered forwarding state

[/spoiler]

Si hace falta que haga mas pruebas estoy disponible.

Probado y funcionando OK, nose que diferencia tiene con respecto al anterior porque funciona igual de bien, modo cliente y AP, eres un crack.

[spoiler=dmesg]
000] 0x000000020100-0x000000120000 : "kernel"
[    0.392000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.404000] device: 'mtd1': device_add
[    0.404000] device: 'mtd1ro': device_add
[    0.404000] device: '31:1': device_add
[    0.408000] device: 'mtdblock1': device_add
[    0.408000] 0x000000120000-0x000000fe0000 : "rootfs"
[    0.412000] device: 'mtd2': device_add
[    0.412000] device: 'mtd2ro': device_add
[    0.416000] device: '31:2': device_add
[    0.416000] device: 'mtdblock2': device_add
[    0.416000] mtd: partition "rootfs" set to be root filesystem
[    0.424000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=CA0000
[    0.432000] 0x000000340000-0x000000fe0000 : "rootfs_data"
[    0.436000] device: 'mtd3': device_add
[    0.436000] device: 'mtd3ro': device_add
[    0.440000] device: '31:3': device_add
[    0.440000] device: 'mtdblock3': device_add
[    0.440000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.448000] device: 'mtd4': device_add
[    0.448000] device: 'mtd4ro': device_add
[    0.448000] device: '31:4': device_add
[    0.448000] device: 'mtdblock4': device_add
[    0.452000] 0x000000020000-0x000000fe0000 : "linux"
[    0.456000] device: 'mtd5': device_add
[    0.456000] device: 'mtd5ro': device_add
[    0.456000] device: '31:5': device_add
[    0.460000] device: 'mtdblock5': device_add
[    0.460000] driver: 'physmap-flash.0': driver_bound: bound to device 'physmap-flash'
[    0.460000] bus: 'platform': really_probe: bound device physmap-flash.0 to driver physmap-flash
[    0.460000] bus: 'spi': add driver m25p80
[    0.460000] bus: 'platform': add driver bcm63xx-hsspi
[    0.460000] bus: 'platform': add driver spi_gpio
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (1)
[    0.464000] bus: 'mdio_bus': add driver Broadcom BCM63XX (2)
[    0.464000] bus: 'platform': add driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet_shared.0 with driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet_shared with device bcm63xx_enet_shared.0
[    0.464000] driver: 'bcm63xx_enet_shared.0': driver_bound: bound to device 'bcm63xx_enet_shared'
[    0.464000] bus: 'platform': really_probe: bound device bcm63xx_enet_shared.0 to driver bcm63xx_enet_shared
[    0.464000] bus: 'platform': add driver bcm63xx_enet
[    0.464000] bus: 'platform': driver_probe_device: matched device bcm63xx_enet.1 with driver bcm63xx_enet
[    0.464000] bus: 'platform': really_probe: probing driver bcm63xx_enet with device bcm63xx_enet.1
[    0.464000] device: 'eth0': device_add
[    0.468000] driver: 'bcm63xx_enet.1': driver_bound: bound to device 'bcm63xx_enet'
[    0.468000] bus: 'platform': really_probe: bound device bcm63xx_enet.1 to driver bcm63xx_enet
[    0.468000] bus: 'platform': add driver bcm63xx_enetsw
[    0.472000] bus: 'platform': add driver bcm63xx-wdt
[    0.472000] bus: 'platform': driver_probe_device: matched device bcm63xx-wdt with driver bcm63xx-wdt
[    0.472000] bus: 'platform': really_probe: probing driver bcm63xx-wdt with device bcm63xx-wdt
[    0.472000] device: 'watchdog': device_add
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.476000] driver: 'bcm63xx-wdt': driver_bound: bound to device 'bcm63xx-wdt'
[    0.476000] bus: 'platform': really_probe: bound device bcm63xx-wdt to driver bcm63xx-wdt
[    0.480000] bus: 'platform': add driver leds-gpio
[    0.480000] bus: 'platform': driver_probe_device: matched device leds-gpio.0 with driver leds-gpio
[    0.480000] bus: 'platform': really_probe: probing driver leds-gpio with device leds-gpio.0
[    0.480000] device: 'message': device_add
[    0.480000] Registered led device: message
[    0.480000] device: 'hspa': device_add
[    0.480000] Registered led device: hspa
[    0.480000] device: 'dsl': device_add
[    0.480000] Registered led device: dsl
[    0.480000] device: 'power': device_add
[    0.484000] Registered led device: power
[    0.484000] device: 'all_leds': device_add
[    0.484000] Registered led device: all_leds
[    0.484000] driver: 'leds-gpio.0': driver_bound: bound to device 'leds-gpio'
[    0.484000] bus: 'platform': really_probe: bound device leds-gpio.0 to driver leds-gpio
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.308000] eth0: link forced UP - 100/full - flow control off/off
[    3.488000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.556000] There is already a switch registered on the device 'eth0'
[    5.804000] device class 'input': registering
[    6.024000] Button Hotplug driver version 0.4.1
[   13.580000] Compat-wireless backport release: compat-wireless-2012-06-14
[   13.588000] Backport based on wireless-testing.git master-2012-06-14
[   13.596000] compat.git: wireless-testing.git
[   13.656000] device class 'ieee80211': registering
[   13.656000] Registering platform device 'regulatory.0'. Parent at platform
[   13.656000] device: 'regulatory.0': device_add
[   13.656000] bus: 'platform': add device regulatory.0
[   13.660000] cfg80211: Calling CRDA to update world regulatory domain
[   13.664000] cfg80211: World regulatory domain updated:
[   13.672000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.680000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.688000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.696000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.704000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.712000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.340000] device class 'scsi_host': registering
[   14.340000] bus: 'scsi': registered
[   14.340000] device class 'scsi_device': registering
[   14.340000] SCSI subsystem initialized
[   14.428000] There is already a switch registered on the device 'eth0'
[   14.784000] bus: 'usb': registered
[   14.784000] bus: 'usb': add driver usbfs
[   14.784000] usbcore: registered new interface driver usbfs
[   14.788000] bus: 'usb': add driver hub
[   14.788000] usbcore: registered new interface driver hub
[   14.796000] bus: 'usb': add driver usb
[   14.796000] usbcore: registered new device driver usb
[   15.404000] bus: 'pci': add driver rt2800pci
[   15.404000] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver rt2800pci
[   15.404000] bus: 'pci': really_probe: probing driver rt2800pci with device 0000:00:01.0
[   15.404000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.408000] rt2800pci 0000:00:01.0: enabling bus mastering
[   15.412000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   15.412000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[   15.420000] rt2800pci 0000:00:01.0: firmware: requesting RT3062.eeprom
[   15.420000] device: '0000:00:01.0': device_add
[   15.600000] device: '0000:00:01.0': device_unregister
[   15.600000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3572, rf: 0008, rev: 0223.
[   15.608000] device: 'phy0': device_add
[   15.612000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.612000] device: 'wlan0': device_add
[   15.612000] device: 'rt2800pci-phy0::radio': device_add
[   15.612000] Registered led device: rt2800pci-phy0::radio
[   15.612000] device: 'rt2800pci-phy0::assoc': device_add
[   15.612000] Registered led device: rt2800pci-phy0::assoc
[   15.612000] device: 'rt2800pci-phy0::quality': device_add
[   15.612000] Registered led device: rt2800pci-phy0::quality
[   15.612000] driver: '0000:00:01.0': driver_bound: bound to device 'rt2800pci'
[   15.612000] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver rt2800pci
[   15.800000] bus: 'bcma': registered
[   15.800000] bus: 'pci': add driver bcma-pci-bridge
[   16.500000] device class 'sound': registering
[   17.008000] device: 'timer': device_add
[   17.476000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.912000] device class 'scsi_disk': registering
[   17.912000] bus: 'scsi': add driver sd
[   17.952000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.956000] bus: 'platform': add driver bcm63xx_ehci
[   17.956000] bus: 'platform': driver_probe_device: matched device bcm63xx_ehci.0 with driver bcm63xx_ehci
[   17.956000] bus: 'platform': really_probe: probing driver bcm63xx_ehci with device bcm63xx_ehci.0
[   18.060000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   18.064000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   18.100000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   18.116000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   18.124000] device: 'usb1': device_add
[   18.124000] bus: 'usb': add device usb1
[   18.124000] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[   18.124000] bus: 'usb': really_probe: probing driver usb with device usb1
[   18.124000] device: '1-0:1.0': device_add
[   18.124000] bus: 'usb': add device 1-0:1.0
[   18.124000] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[   18.124000] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[   18.124000] hub 1-0:1.0: USB hub found
[   18.128000] hub 1-0:1.0: 2 ports detected
[   18.132000] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[   18.132000] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[   18.132000] device: 'ep_81': device_add
[   18.132000] driver: 'usb1': driver_bound: bound to device 'usb'
[   18.132000] bus: 'usb': really_probe: bound device usb1 to driver usb
[   18.132000] device: 'ep_00': device_add
[   18.132000] driver: 'bcm63xx_ehci.0': driver_bound: bound to device 'bcm63xx_ehci'
[   18.132000] bus: 'platform': really_probe: bound device bcm63xx_ehci.0 to driver bcm63xx_ehci
[   18.132000] bus: 'pci': add driver ehci_hcd
[   18.328000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   19.028000] bus: 'i2c': registered
[   19.028000] bus: 'i2c': add driver dummy
[   19.060000] i2c /dev entries driver
[   19.064000] device class 'i2c-dev': registering
[   19.240000] bus: 'usb': add driver cdc_acm
[   19.240000] usbcore: registered new interface driver cdc_acm
[   19.244000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.488000] bus: 'usb': add driver snd-usb-audio
[   19.488000] usbcore: registered new interface driver snd-usb-audio
[   19.628000] Initializing USB Mass Storage driver...
[   19.632000] bus: 'usb': add driver usb-storage
[   19.632000] usbcore: registered new interface driver usb-storage
[   19.640000] USB Mass Storage support registered.
[   19.824000] Linux video capture interface: v2.00
[   19.828000] device class 'video4linux': registering
[   20.188000] bus: 'platform': add driver gpio-keys-polled
[   20.188000] bus: 'platform': driver_probe_device: matched device gpio-keys-polled.0 with driver gpio-keys-polled
[   20.188000] bus: 'platform': really_probe: probing driver gpio-keys-polled with device gpio-keys-polled.0
[   20.188000] device: 'input0': device_add
[   20.188000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   20.196000] driver: 'gpio-keys-polled.0': driver_bound: bound to device 'gpio-keys-polled'
[   20.196000] bus: 'platform': really_probe: bound device gpio-keys-polled.0 to driver gpio-keys-polled
[   20.332000] bus: 'usb': add driver uvcvideo
[   20.332000] usbcore: registered new interface driver uvcvideo
[   20.340000] USB Video Class driver (1.1.1)
[   26.572000] device: 'br-lan': device_add
[   26.576000] eth0: link forced UP - 100/full - flow control off/off
[   26.584000] device eth0 entered promiscuous mode
[   26.592000] br-lan: port 1(eth0) entered forwarding state
[   26.596000] br-lan: port 1(eth0) entered forwarding state
[   28.600000] br-lan: port 1(eth0) entered forwarding state
[   50.692000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   50.708000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   50.712000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[  125.200000] JFFS2 notice: (1165) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  163.272000] device: 'tmp.radio0': device_add
[  163.292000] device: 'tmp.radio0': device_add
[  167.340000] device: 'tmp.radio0': device_add
[  167.360000] device: 'tmp.radio0': device_add
[  173.760000] device: 'tmp.radio0': device_add
[  173.784000] device: 'tmp.radio0': device_add
[  178.592000] device: 'tmp.radio0': device_add
[  178.612000] device: 'tmp.radio0': device_add
[  182.420000] device: 'tmp.radio0': device_add
[  184.772000] device: 'tmp.radio0': device_add
[  184.804000] device: 'tmp.radio0': device_add
[  188.116000] device: 'tmp.radio0': device_add
[  188.128000] device: 'tmp.radio0': device_add
[  193.484000] device: 'tmp.radio0': device_add
[  193.520000] device: 'tmp.radio0': device_add
[  194.592000] device: 'tmp.radio0': device_add
[  198.304000] device: 'tmp.radio0': device_add
[  198.332000] device: 'tmp.radio0': device_add
[  198.360000] device: 'wlan0': device_add
[  199.696000] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'.
[  199.704000] rt2800pci 0000:00:01.0: firmware: requesting rt2860.bin
[  199.704000] device: '0000:00:01.0': device_add
[  199.932000] device: '0000:00:01.0': device_unregister
[  199.932000] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34.
[  200.092000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  200.104000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  200.112000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  200.124000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
[  200.172000] device wlan0 entered promiscuous mode
[  200.332000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
[  200.344000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
[  200.352000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
[  200.364000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
[  200.440000] br-lan: port 2(wlan0) entered forwarding state
[  200.444000] br-lan: port 2(wlan0) entered forwarding state
[  200.460000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 1, TXop: 47.
[  200.496000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 1, TXop: 94.
[  200.520000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 6, Aifs: 3, TXop: 0.
[  200.544000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[  202.448000] br-lan: port 2(wlan0) entered forwarding state

[/spoiler]

A todo esto, ¿alguien podría decirme el color de cada uno de los LEDs?

message -> ?
hspa -> ?
dsl -> ?
power -> ?

El GPIO 6 que danitool definió como "all" imagino que enciende todos los LEDs...

Todos los leds son rojos (o eso creo), yo solo veo encendido el de power y el de wifi cuando está el wifi activado, pero cuando dejo pulsado el botón reset se encienden todos y todos son rojos.

No se si es eso lo que estas preguntando o te refieres a otra cosa.

raphik

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #331 en: 09-07-2012, 23:58 (Lunes) »
 >:(
Buenas noticias. He restaurado el router "sin wifi" con los datos de calibración de un segundo router hg556a. De momento parece que todo va bien. De hecho lo estoy usando para postear este mensaje. Lo único a destacar es que con el último firm de noltari no se podía porque daba un mensaje de "poco espacio disponible". Con el firm r29606 de danitool he podido restaurarlo con éxito.

Un saludo.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #332 en: 10-07-2012, 00:01 (Martes) »
>:(
Buenas noticias. He restaurado el router "sin wifi" con los datos de calibración de un segundo router hg556a. De momento parece que todo va bien. De hecho lo estoy usando para postear este mensaje. Lo único a destacar es que con el último firm de noltari no se podía porque daba un mensaje de "poco espacio disponible". Con el firm r29606 de danitool he podido restaurarlo con éxito.

Un saludo.
De puta madre tío!
Ya pensaba que por mi culpa te habías quedado sin WLAN :_(...

Puedes probar el último firmware en el "mártir" por favor y poner un bootlog?
https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654.bin

raphik

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #333 en: 10-07-2012, 00:22 (Martes) »
De puta madre tío!
Ya pensaba que por mi culpa te habías quedado sin WLAN :_(...

Puedes probar el último firmware en el "mártir" por favor y poner un bootlog?
https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654.bin
Acabo de probarle un firm original (el irlandés B025) y el paciente no se queja. Como curiosidad, mantiene el número de serie y la mac originales, pero el ssid es el mismo que el del router "donante".
Bueno, ahora mismo lo pruebo y te envío el bootlog por gmail.

EDITO: No reconoce el dispositivo wifi
  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 ATTITUDE ADJUSTMENT (Bleeding Edge, r32654)
 -----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
 -----------------------------------------------------
root@OpenWrt:/# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

br-lan    no wireless extensions.
« Última modificación: 10-07-2012, 00:43 (Martes) por raphik »

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #334 en: 10-07-2012, 00:52 (Martes) »
De puta madre tío!
Ya pensaba que por mi culpa te habías quedado sin WLAN :_(...

Puedes probar el último firmware en el "mártir" por favor y poner un bootlog?
https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654.bin
Acabo de probarle un firm original (el irlandés B025) y el paciente no se queja. Como curiosidad, mantiene el número de serie y la mac originales, pero el ssid es el mismo que el del router "donante".
Bueno, ahora mismo lo pruebo y te envío el bootlog por gmail.

EDITO: No reconoce el dispositivo wifi
 _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 ATTITUDE ADJUSTMENT (Bleeding Edge, r32654)
 -----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
 -----------------------------------------------------
root@OpenWrt:/# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

br-lan    no wireless extensions.

Pensaba que la parte de la EEPROM del parche de danitool ya no hacía falta, pero no la está leyendo así que toca nuevo parche...

Podrías probar este firmware? (es decir, cuando tengas un rato, si es mañana, pues eso ;))
https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654_EEPROM.bin

De todas formas, ya no debería haber peligro con los datos del wifi. Si vuelves al firmware de danitool imagino que tendrás wifi no?

EDIT: Simplemente comentarios sobre el bootlog.
Podemos ver que esta vez el fixup sí funciona, o sea que está detectando los datos de calibración del wifi:
Código: [Seleccionar]
[    0.192000] pci 0000:00:01.0: fixup device configuration
Esto es lo que falla ahora, no inicializa el dispositivo por la EEPROM, así que he añadido el parche que había descartado de danitool (1 sola línea).
Código: [Seleccionar]
[   14.904000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   14.920000] ath: phy0: no band has been marked as supported in EEPROM
[   14.924000] ath: phy0: Unable to initialize hardware; initialization status:
-22
[   14.932000] ath9k 0000:00:01.0: Failed to initialize device
[   14.940000] ath9k: probe of 0000:00:01.0 failed with error -22
« Última modificación: 10-07-2012, 01:01 (Martes) por Noltari »

tool

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #335 en: 10-07-2012, 01:07 (Martes) »
Funciona a 300mbps el Ralink!

Si alguno quiere backups de lo que sea, tengo 2 Ralink y 2 Atheros a vuestro servicio para cualquier prueba. A ver si esta semana me me insolo el rs232.

raphik

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #336 en: 10-07-2012, 11:27 (Martes) »
Pensaba que la parte de la EEPROM del parche de danitool ya no hacía falta, pero no la está leyendo así que toca nuevo parche...

Podrías probar este firmware? (es decir, cuando tengas un rato, si es mañana, pues eso ;))
https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654_EEPROM.bin

De todas formas, ya no debería haber peligro con los datos del wifi. Si vuelves al firmware de danitool imagino que tendrás wifi no?

EDIT: Simplemente comentarios sobre el bootlog.
Podemos ver que esta vez el fixup sí funciona, o sea que está detectando los datos de calibración del wifi:
Código: [Seleccionar]
[    0.192000] pci 0000:00:01.0: fixup device configuration
Esto es lo que falla ahora, no inicializa el dispositivo por la EEPROM, así que he añadido el parche que había descartado de danitool (1 sola línea).
Código: [Seleccionar]
[   14.904000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   14.920000] ath: phy0: no band has been marked as supported in EEPROM
[   14.924000] ath: phy0: Unable to initialize hardware; initialization status:
-22
[   14.932000] ath9k 0000:00:01.0: Failed to initialize device
[   14.940000] ath9k: probe of 0000:00:01.0 failed with error -22

Esta tarde sigo con las pruebas. Primero le voy a poner un firm original, o el de danitool, para ver si sigue teniendo wifi. Después ya le pruebo el tuyo y te envío el bootlog.

Un saludo.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #337 en: 10-07-2012, 12:01 (Martes) »
Pensaba que la parte de la EEPROM del parche de danitool ya no hacía falta, pero no la está leyendo así que toca nuevo parche...

Podrías probar este firmware? (es decir, cuando tengas un rato, si es mañana, pues eso ;))
https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654_EEPROM.bin

De todas formas, ya no debería haber peligro con los datos del wifi. Si vuelves al firmware de danitool imagino que tendrás wifi no?

EDIT: Simplemente comentarios sobre el bootlog.
Podemos ver que esta vez el fixup sí funciona, o sea que está detectando los datos de calibración del wifi:
Código: [Seleccionar]
[    0.192000] pci 0000:00:01.0: fixup device configuration
Esto es lo que falla ahora, no inicializa el dispositivo por la EEPROM, así que he añadido el parche que había descartado de danitool (1 sola línea).
Código: [Seleccionar]
[   14.904000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   14.920000] ath: phy0: no band has been marked as supported in EEPROM
[   14.924000] ath: phy0: Unable to initialize hardware; initialization status:
-22
[   14.932000] ath9k 0000:00:01.0: Failed to initialize device
[   14.940000] ath9k: probe of 0000:00:01.0 failed with error -22

Esta tarde sigo con las pruebas. Primero le voy a poner un firm original, o el de danitool, para ver si sigue teniendo wifi. Después ya le pruebo el tuyo y te envío el bootlog.

Un saludo.
Me parece bien ese procedimiento :P, jar229 a lo mejor tiene algo de tiempo para hacer pruebas también.
Cualquier prueba que hagáis se pone por aquí y así el otro lo sabe ;).

Saludos!

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #338 en: 10-07-2012, 17:28 (Martes) »
Perfecto, posteando desde el Ralink!

Parece que tiene "menos potencia wifi", que el Atheros.

A ver si estos días le doy más pruebas, y pruebo el modo cliente transparente, que no funcionaba en Atheros (relayd).

Gracias a todos por el currele!


Ahora arreglar la detección de mac, y router perfecto!
tool podrías, con mi firmware, hacer un backup de la partición mtd4 y enviármelo por favor?
dd if=/dev/mtd4 of=/www/mtd4.bin
http://192.168.1.8/mtd4.bin

https://dl.dropbox.com/u/4708147/openwrt/hg556a/openwrt-HW556-squashfs-cfe_r32654_EEPROM.bin

Saludos!

raphik

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #339 en: 10-07-2012, 17:31 (Martes) »
Me parece bien ese procedimiento :P, jar229 a lo mejor tiene algo de tiempo para hacer pruebas también.
Cualquier prueba que hagáis se pone por aquí y así el otro lo sabe ;).

Saludos!

Probado firmware openwrt-HW556-squashfs-cfe_r32654_EEPROM.bin
No hay wifi.
Recupera la wifi tras flashear con firm de danitool.
Bootlog enviado a noltari por privado.

Saludos.