¿Es esto normal?
Esto que sale del puerto 2, got link, lost link ..... y se repite un montón ??
root@firewall:~# dmesg
[ 0.000000] Linux version 4.9.184 (buildbot@c2c312384f99) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7808-ef686b7292) ) #0 SMP Thu Jun 27 12:18:52 2019
[ 0.000000] SoC: xRX200 rev 1.2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is Orange Livebox 2.1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 8054aa60, node_mem_map 81008680
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] percpu: Embedded 12 pages/cpu s17488 r8192 d23472 u49152
[ 0.000000] pcpu-alloc: s17488 r8192 d23472 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyLTQ0,115200
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 122880K/131072K available (4339K kernel code, 176K rwdata, 900K rodata, 1224K init, 228K bss, 8192K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] Setting up vectored interrupts
[ 0.000000] Setting up IPI vectored interrupts
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[ 0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
[ 0.007884] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[ 0.042416] pid_max: default: 32768 minimum: 301
[ 0.047297] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.053830] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.065655] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.065667] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.065855] CPU1 revision is: 00019556 (MIPS 34Kc)
[ 0.116564] Synchronize counters for CPU 1:
[ 0.116566] done.
[ 0.123074] Brought up 2 CPUs
[ 0.130257] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.139916] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.146153] pinctrl core: initialized pinctrl subsystem
[ 0.152650] NET: Registered protocol family 16
[ 0.165306] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.171270] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[ 0.284075] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.430791] PCI host bridge /fpi@10000000/pcie@d900000 ranges:
[ 0.465062] usbcore: registered new interface driver usbfs
[ 0.470653] usbcore: registered new interface driver hub
[ 0.475846] random: fast init done
[ 0.479455] usbcore: registered new device driver usb
[ 0.485138] PCI host bridge to bus 0000:00
[ 0.489161] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[ 0.496083] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
[ 0.503036] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.509882] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.517918] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060000
[ 0.517939] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
[ 0.535819] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.536577] pci 0000:01:00.0: [1a30:0710] type 00 class 0x0d8000
[ 0.536668] pci 0000:01:00.0: reg 0x10: [mem 0xffff0000-0xffff0fff pref]
[ 0.536710] pci 0000:01:00.0: reg 0x14: [mem 0xff000000-0xff7fffff pref]
[ 0.536965] pci 0000:01:00.0: supports D1
[ 0.536989] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.537312] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.537363] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.537448] pci 0000:00:00.0: BAR 9: assigned [mem 0x1c000000-0x1cbfffff pref]
[ 0.544597] pci 0000:01:00.0: BAR 1: assigned [mem 0x1c000000-0x1c7fffff pref]
[ 0.551884] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c800000-0x1c800fff pref]
[ 0.559166] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.564183] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cbfffff pref]
[ 0.571500] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[ 0.578141] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[ 0.584517] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 0.591170] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 0.599799] clocksource: Switched to clocksource MIPS
[ 0.607249] NET: Registered protocol family 2
[ 0.612866] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.619755] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.626162] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.632687] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.638512] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.645108] NET: Registered protocol family 1
[ 0.649444] PCI: CLS 0 bytes, default 32
[ 0.650195] gptu: totally 6 16-bit timers/counters
[ 0.655072] gptu: misc_register on minor 63
[ 0.659290] gptu: succeeded to request irq 126
[ 0.663722] gptu: succeeded to request irq 127
[ 0.668242] gptu: succeeded to request irq 128
[ 0.672755] gptu: succeeded to request irq 129
[ 0.677260] gptu: succeeded to request irq 130
[ 0.681784] gptu: succeeded to request irq 131
[ 0.686678] phy-xrx200 gphy-xrx200: requesting lantiq/xrx200_phy22f_a22.bin
[ 0.694230] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7E60000
[ 0.700591] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7E60000
[ 0.808159] No VPEs reserved for AP/SP, not initialize VPE loader
[ 0.808159] Pass maxvpes=<n> argument as kernel argument
[ 0.819539] No TCs reserved for AP/SP, not initializing RTLX.
[ 0.819539] Pass maxtcs=<n> argument as kernel argument
[ 0.832324] Crashlog allocated RAM at address 0x3f00000
[ 0.838237] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.860145] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.865897] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.881828] io scheduler noop registered
[ 0.885672] io scheduler deadline registered (default)
[ 0.892185] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[ 0.901113] console [ttyLTQ0] enabled
[ 0.908444] bootconsole [early0] disabled
[ 0.918123] lantiq nor flash device: 02000000 at 10000000
[ 0.922292] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
[ 0.931704] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.936852] Amd/Fujitsu Extended Query version 1.3.
[ 0.941912] number of CFI chips: 1
[ 0.945346] 4 fixed-partitions partitions found on MTD device ltq_nor
[ 0.951737] Creating 4 MTD partitions on "ltq_nor":
[ 0.956593] 0x000000000000-0x000000060000 : "uboot"
[ 0.964021] 0x000000060000-0x000000080000 : "uboot-env"
[ 0.970134] 0x000000080000-0x000001f80000 : "firmware"
[ 0.996129] 2 uimage-fw partitions found on MTD device firmware
[ 1.000657] 0x000000080000-0x00000022b6b2 : "kernel"
[ 1.007746] 0x00000022b6b2-0x000001f80000 : "rootfs"
[ 1.013714] mtd: device 4 (rootfs) set to be root filesystem
[ 1.018069] 1 squashfs-split partitions found on MTD device rootfs
[ 1.024170] 0x0000004c0000-0x000001f80000 : "rootfs_data"
[ 1.031991] 0x000001f80000-0x000002000000 : "boardconfig"
[ 1.042436] libphy: Fixed MDIO Bus: probed
[ 1.149713] libphy: lantiq,xrx200-mdio: probed
[ 1.228453] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6] (mii_bus:phy_addr=0:00, irq=-1)
[ 1.312414] Intel XWAY PHY22F (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY22F (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=-1)
[ 1.396414] Intel XWAY PHY22F (xRX v1.2 integrated) 0:14: attached PHY driver [Intel XWAY PHY22F (xRX v1.2 integrated)] (mii_bus:phy_addr=0:14, irq=-1)
[ 1.480414] Intel XWAY PHY22F (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY22F (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=-1)
[ 1.564420] Intel XWAY PHY22F (xRX v1.2 integrated) 0:12: attached PHY driver [Intel XWAY PHY22F (xRX v1.2 integrated)] (mii_bus:phy_addr=0:12, irq=-1)
[ 1.679765] ltq-cputemp cputemp@0: Current CPU die temperature: 41.5 °C
[ 1.685476] wdt 1f8803f0.watchdog: Init done
[ 1.694594] NET: Registered protocol family 10
[ 1.699952] NET: Registered protocol family 17
[ 1.703043] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.715974] 8021q: 802.1Q VLAN Support v1.8
[ 1.731954] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.741444] Freeing unused kernel memory: 1224K
[ 1.744583] This architecture does not have kernel memory protection.
[ 2.513772] init: Console is alive
[ 2.516193] init: - watchdog -
[ 3.121602] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.269303] dwc2 1e101000.ifxhcd: requested GPIO 494
[ 3.371953] lantiq,xrx200-net 1e108000.eth eth0: port 4 got link
[ 3.377060] dwc2 1e101000.ifxhcd: DWC OTG Controller
[ 3.381600] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[ 3.388881] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[ 3.394428] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
[ 3.401843] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[ 3.409545] hub 1-0:1.0: USB hub found
[ 3.412056] hub 1-0:1.0: 1 port detected
[ 3.517524] dwc2 1e106000.ifxhcd: DWC OTG Controller
[ 3.521179] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
[ 3.528467] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[ 3.533987] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
[ 3.541405] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[ 3.549113] hub 2-0:1.0: USB hub found
[ 3.551572] hub 2-0:1.0: 1 port detected
[ 3.556954] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.573385] init: - preinit -
[ 4.375713] lantiq,xrx200-net 1e108000.eth eth0: port 0 got link
[ 4.555698] lantiq,xrx200-net 1e108000.eth eth0: port 3 got link
[ 4.577814] random: procd: uninitialized urandom read (4 bytes read)
[ 8.170236] jffs2: notice: (433) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 8.189999] mount_root: switching to jffs2 overlay
[ 8.226836] urandom-seed: Seeding with /etc/urandom.seed
[ 8.653050] lantiq,xrx200-net 1e108000.eth eth0: port 0 lost link
[ 8.657868] lantiq,xrx200-net 1e108000.eth eth0: port 4 lost link
[ 8.664017] lantiq,xrx200-net 1e108000.eth eth0: port 3 lost link
[ 8.682667] procd: - early -
[ 8.684444] procd: - watchdog -
[ 9.357872] procd: - watchdog -
[ 9.360250] procd: - ubus -
[ 9.376551] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.414330] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.420025] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.427466] procd: - init -
[ 10.344289] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.353169] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
[ 10.363001] NET: Registered protocol family 8
[ 10.366050] NET: Registered protocol family 20
[ 10.376845] PPP generic driver version 2.4.2
[ 10.385869] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.404180] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.412925] Infineon Technologies DEU driver version 2.0.0
[ 10.419023] IFX DEU DES initialized (multiblock).
[ 10.423985] IFX DEU AES initialized (multiblock).
[ 10.428206] IFX DEU ARC4 initialized (multiblock).
[ 10.432394] IFX DEU SHA1 initialized.
[ 10.436075] IFX DEU MD5 initialized.
[ 10.439553] IFX DEU SHA1_HMAC initialized.
[ 10.443706] IFX DEU MD5_HMAC initialized.
[ 10.454701] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 10.501244] NET: Registered protocol family 24
[ 10.520308] xt_time: kernel timezone is -0000
[ 10.531595] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.451495] urandom_read: 5 callbacks suppressed
[ 12.451507] random: jshn: uninitialized urandom read (4 bytes read)
[ 19.819918] random: crng init done
[ 21.879001] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.915312] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 21.971449] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 23.916133] lantiq,xrx200-net 1e108000.eth eth0: port 4 got link
[ 23.921433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.943999] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 23.949570] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 24.940057] lantiq,xrx200-net 1e108000.eth eth0: port 3 got link
[ 24.945170] lantiq,xrx200-net 1e108000.eth eth0: port 0 got link
[39589.167534] lantiq,xrx200-net 1e108000.eth eth0: port 2 got link
[39591.215509] lantiq,xrx200-net 1e108000.eth eth0: port 2 lost link
[39593.263521] lantiq,xrx200-net 1e108000.eth eth0: port 2 got link
[48019.727491] lantiq,xrx200-net 1e108000.eth eth0: port 2 lost link
[48029.967473] lantiq,xrx200-net 1e108000.eth eth0: port 2 got link
[48154.894993] lantiq,xrx200-net 1e108000.eth eth0: port 2 lost link
.....