Es de agradecer el arduo trabajo de gente como t3l3m4k0,RollerDK y demas gente que dominais linux y sacais partido a todo lo que se basa en linux yo soy un poco newbie pero poco a poco voy aprendiendo cosillas fijandome en los mas grandes
.
Mi caso con el comtrend 5361 es el siguiente he modificado 3 ,uno murio pq cuando hice la modificacion por hardware quedo un hilo fino suelto haciendo corto en la placa y los otros 2 los hice bien con resistencias smd su 7805 y dejandolo lo mas fino que pude pero sigo sin que me funcione.He visto la luz gracias a este firm "openwrt-96348GW-generic-squashfs-cfe.bin" ya veo en el log que me detecta el pendrive o disco que conecto pero sigo sin poder acceder a el desde windows ,he leido algo de que necesitaria samba pero e buscado el paquete de instalacion sin resultado positivo y el que encontre pesaba demasiado.Espero vuestra ayuda pues me gustaria usar un disco con 3 particiones accesible por ftp para tener un server web,otra swap y otra ext 3 para ampliar la capacidad del comtrend pero creo que ire para largo y si no doy con ello pronto acabare cogiendo un router que tenga usb .Dejo un fragmento del log de mi router donde sale la deteccion del pendrive:
Log Kernel
Linux version 2.6.32.20 (rollerdk@linuxServer) (gcc version 4.3.3 (GCC)
) #3 Mon Aug 30 10:43:44 CEST 2010 Detected Broadcom 0x6348 CPU revision
b0 CPU frequency is 256 MHz 16MB of RAM installed registering 37 GPIOs
board_bcm963xx: CFE version: 1.0.37-0.7 bootconsole [early0] enabled CPU
revision is: 00029107 (Broadcom BCM6348) board_bcm963xx: board name:
96348GW-11 Determined physical RAM map: memory: 01000000 @ 00000000
(usable) Initrd not found or empty - disabling initrd Zone PFN ranges:
Normal 0x00000000 -> 0x00001000 Movable zone start PFN for each node
early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00001000 On node
0 totalpages: 4096 free_area_init_node: node 0, pgdat 802776e0,
node_mem_map 802c6000 Normal zone: 32 pages used for memmap Normal zone:
0 pages reserved Normal zone: 4064 pages, LIFO batch:0 Built 1 zonelists
in Zone order, mobility grouping off. Total pages: 4064 Kernel command
line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd
console=ttyS0,115200 PID hash table entries: 64 (order: -4, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache
hash table entries: 1024 (order: 0, 4096 bytes) Primary instruction
cache 16kB, VIPT, 2-way, linesize 16 bytes. Primary data cache 8kB,
2-way, VIPT, no aliases, linesize 16 bytes Memory: 13384k/16384k
available (2094k kernel code, 3000k reserved, 368k data, 140k init, 0k
highmem) Hierarchical RCU implementation. NR_IRQS:128 Calibrating delay
loop... 254.97 BogoMIPS (lpj=509952) Mount-cache hash table entries: 512
NET: Registered protocol family 16 registering PCI controller with
io_map_base unset bio: create slab <bio-0> at 0 pci 0000:00:01.0: reg 10
32bit mmio: [0x000000-0x001fff] Switching to clocksource MIPS PCI:
Enabling device 0000:00:01.0 (0000 -> 0002) PCI: Setting latency timer
of device 0000:00:01.0 to 64 ssb: Core 0 found: ChipCommon (cc 0x800,
rev 0x04, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev
0x05, vendor 0x4243) ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02,
vendor 0x4243) ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor
0x4243) ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243) ssb:
Sonics Silicon Backplane found on PCI device 0000:00:01.0 NET:
Registered protocol family 2 IP route cache hash table entries: 1024
(order: 0, 4096 bytes) TCP established hash table entries: 512 (order:
0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512) TCP reno
registered NET: Registered protocol family 1 audit: initializing netlink
socket (disabled) type=2000 audit(0.244:1): initialized squashfs:
version 4.0 (2009/01/31) Phillip Lougher Registering mini_fo version
$Id$ JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY)
(c) 2001-2006 Red Hat, Inc. msgmni has been set to 26 io scheduler noop
registered io scheduler deadline registered (default) gpiodev: gpio
device registered with major 254 bcm63xx_uart.0: ttyS0 at MMIO
0xfffe0300 (irq = 10) is a bcm63xx_uart console [ttyS0] enabled,
bootconsole disabled bcm963xx_flash: 0x00400000 at 0x1fc00000 bcm963xx:
Found 1 x16 devices at 0x0 in 16-bit bank CFI mfr 0x000000c2 CFI id
0x000022a8 Amd/Fujitsu Extended Query Table at 0x0040 Amd/Fujitsu
Extended Query version 1.1. number of CFI chips: 1 cfi_cmdset_0002:
Disabling erase-suspend-program due to code brokenness. bcm963xx_flash:
Read Signature value of CFE1CFE1 bcm963xx_flash: CFE bootloader detected
bcm963xx_flash: CFE boot tag found with version 6 and board type 96348GW
bcm963xx_flash: Partition 0 is CFE offset 0 and length 10000
bcm963xx_flash: Partition 1 is kernel offset 10100 and length dff00
bcm963xx_flash: Partition 2 is rootfs offset f0000 and length 300000
bcm963xx_flash: Partition 3 is nvram offset 3f0000 and length 10000
bcm963xx_flash: Partition 4 is linux offset 10000 and length 3e0000
bcm963xx_flash: Spare partition is 370000 offset and length 80000
Creating 5 MTD partitions on "bcm963xx": 0x000000000000-0x000000010000 :
"CFE" 0x000000010100-0x0000000f0000 : "kernel" mtd: partition "kernel"
must either start or end on erase block boundary or be smaller than an
erase block -- forcing read-only 0x0000000f0000-0x0000003f0000 :
"rootfs" mtd: partition "rootfs" set to be root filesystem mtd:
partition "rootfs_data" created automatically, ofs=370000, len=80000
0x000000370000-0x0000003f0000 : "rootfs_data"
0x0000003f0000-0x000000400000 : "nvram" 0x000000010000-0x0000003f0000 :
"linux" bcm63xx_enet MII bus: probed bcm63xx_wdt started, timer margin:
30 sec Registered led device: adsl-fail Registered led device: ppp
Registered led device: ppp-fail Registered led device: power Registered
led device: stop TCP westwood registered NET: Registered protocol family
17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All
bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root
(squashfs filesystem) readonly on device 31:2. Freeing unused kernel
memory: 140k freed Please be patient, while OpenWrt loads ... eth1: link
forced UP - 100/full - flow control off/off roboswitch: Probing device
eth0: roboswitch:
[/home/rollerdk/comtrend/trunk/build_dir/linux-brcm63xx/kmod-switch/switch-robo.c:125]
SIOCGETCPHYRD failed! roboswitch:
[/home/rollerdk/comtrend/trunk/build_dir/linux-brcm63xx/kmod-switch/switch-robo.c:125]
SIOCGETCPHYRD failed! No Robo switch in managed mode found, phy_id =
0xffffffff roboswitch: Probing device eth1: found a 5325! It's a 5350.
mini_fo: using base directory: / mini_fo: using storage directory:
/overlay bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1
[Broadcom BCM63XX (1)] eth1: link forced UP - 100/full - flow control
off/off device eth1 entered promiscuous mode br-lan: port 1(eth1)
entering forwarding state SCSI subsystem initialized usbcore: registered
new interface driver usbfs usbcore: registered new interface driver hub
usbcore: registered new device driver usb wl: module license
'unspecified' taints kernel. Disabling lock debugging due to kernel
taint wl0: Broadcom BCM4320 802.11 Wireless Controller 5.10.56.27 PPP
generic driver version 2.4.2 ip_tables: (C) 2000-2006 Netfilter Core
Team NET: Registered protocol family 24 nf_conntrack version 0.5.0 (211
buckets, 844 max) CONFIG_NF_CT_ACCT is deprecated and will be removed
soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1
nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1
to enable it. xt_time: kernel timezone is -0000 IMQ driver loaded
successfully. Hooking IMQ before NAT on PREROUTING. Hooking IMQ after
NAT on POSTROUTING. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI)
Driver bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number
1 bcm63xx_ohci bcm63xx_ohci.0: irq 20, io mem 0xfffe1b00 usb usb1:
configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub
1-0:1.0: 1 port detected Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage USB Mass Storage
support registered. usb 1-1: new full speed USB device using
bcm63xx_ohci and address 2 usb 1-1: configuration #1 chosen from 1
choice scsi0 : SCSI emulation for USB Mass Storage devices usb-storage:
device found at 2 usb-storage: waiting for device to settle before
scanning scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0
ANSI: 2 sd 0:0:0:0: [sda] 15654848 512-byte logical blocks: (8.01
GB/7.46 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda]
Mode Sense: 65 44 09 30 sd 0:0:0:0: [sda] Assuming drive cache: write
through usb-storage: device scan complete sd 0:0:0:0: [sda] Assuming
drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Assuming drive
cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk usb
1-1: USB disconnect, address 2 usb 1-1: new full speed USB device using
bcm63xx_ohci and address 3 usb 1-1: configuration #1 chosen from 1
choice scsi1 : SCSI emulation for USB Mass Storage devices usb-storage:
device found at 3 usb-storage: waiting for device to settle before
scanning scsi 1:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0
ANSI: 2 sd 1:0:0:0: [sda] 15654848 512-byte logical blocks: (8.01
GB/7.46 GiB) usb-storage: device scan complete sd 1:0:0:0: [sda] Write
Protect is off sd 1:0:0:0: [sda] Mode Sense: 65 44 09 30 sd 1:0:0:0:
[sda] Assuming drive cache: write through sd 1:0:0:0: [sda] Assuming
drive cache: write through sda: sda1 sd 1:0:0:0: [sda] Assuming drive
cache: write through sd 1:0:0:0: [sda] Attached SCSI removable disk
br-lan: port 1(eth1) entering disabled state device eth1 left
promiscuous mode br-lan: port 1(eth1) entering disabled state eth1: link
forced UP - 100/full - flow control off/off eth1: link forced UP -
100/full - flow control off/off device eth1 entered promiscuous mode
br-lan: port 1(eth1) entering forwarding state bcm63xx_enet
bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX (1)]
bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX
(1)] br-lan: port 1(eth1) entering disabled state device eth1 left
promiscuous mode br-lan: port 1(eth1) entering disabled state eth1: link
forced UP - 100/full - flow control off/off eth1: link forced UP -
100/full - flow control off/off device eth1 entered promiscuous mode
br-lan: port 1(eth1) entering forwarding state bcm63xx_enet
bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX (1)]
bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX
(1)]
Powered by LuCI 0.9 Branch (v0.9+svn6240)
</cgi-bin/luci/;stok=36f126d80dbd537ea6ebe3c4fb2d3f38/about>
saludos