Ya me estoy descargado la version no reducida. Pero tengo otra consulta. Cuando les doy a start this virtual machine me sale el siguiente mensaje:
VMware Workstation has measured your CPU speed to be 2358 Mhz, but Windows reports that it is 2401 MHz. This may mean that your computer has a power-saving feature that varies the processor speed. As a result, the clock in your virtual machine may run too fast or too slow. For a workaround, please refer to the VMware knowledge base article at:
http://www.vmware.com/info?id=97Si le doy a OK sigue y me funciona correctamente hasta que tengo que escoger la opcion wifislax text mode. COn esto tengo un problema ya que no puedo poner el signo de = para poner acpi=off, le doy a = y me sale ), todos los simbolos me salen cambiados pero no encuentro el =. Como puedo poner el signo de igual?
¿Tengo que hacerle caso al mensaje que me sale?, le he dado al link de wmware y alli me dice que tengo que modificar el arxivo system.ini del vmware, de hecho me dice esto:
To work around this problem, specify the correct maximum CPU speed in your global configuration file:
1.
Find the speed of your host's CPU. For example, in Windows XP, right click My Computer, then choose Properties. This path may be different, depending on the version of Windows you use.
2.
Look for config.ini in one of the following locations:
*
C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini
*
C:\Documents and Settings\All Users\Application Data\VMware\VMware GSX Server\config.ini
*
C:\Documents and Settings\All Users\Application Data\VMware\VMware Server\config.ini
*
C:\ProgramData\VMware\VMware Workstation or
C:\Program Files\VMware\VMware Workstation
(on a Windows Vista host running Workstation 6.0)
Note: If the file does not exist, create it as a plain text file in the appropriate location as described above, then edit it as follows. For more detail, see "Creating and Editing config.ini on Windows Hosts" at
http://kb.vmware.com/kb/1754.
3.
Edit config.ini, adding the lines described below.
The example presented here assumes that the host computer has a maximum speed of 1700MHz. The first line is the most important one. It should be your host computer's maximum speed in KHz—that is, its speed in MHz times 1000, or its speed in GHz times 1000000.
host.cpukHz = "1700000"
host.noTSC = "TRUE"
ptsc.noTSC = "TRUE"
The second and third lines enable a mechanism that tries to keep the guest clock accurate even when the time stamp counter (TSC) is slow.
Note: On Windows, you can use Notepad, but be careful when you save the file that Notepad does not add an extra .txt extension to the filename. You can do that by selecting All files instead of Text files in the Save dialog box.
4.
Restart the VMware Registration service for the changes to the config.ini file take effect. Restarting VMware registration the changes into effect.
Click Start>Control Panel>Administrative Tools. Double-click on Service. Right-click VMware Registration Service and click Restart.
5.
In addition, check the VMware Tools control panel in the guest operating system. On the Options tab, ensure that Time synchronization between the virtual machine and the host operating system is selected.
PERO YO TENGO EL WINDOWS VISTA ULTIMATE Y NO ME APARECE EN NINGUNA DE ESAS RUTAS EN C:; SABES DONDE PUEDE ESTAR EL ARCHIVO CONFIG.INI Y SI REALMENTE ES NECESARIO HACER ESTOS PASOS?
Saludos!