Autor Tema: wifislax-4.3-rc6  (Leído 75918 veces)

0 Usuarios y 1 Visitante están viendo este tema.

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #60 en: 05-12-2012, 22:47 (Miércoles) »
pues acabo de probar el hashcat,jdownloader y el vlc y funcionan todos.

los  modulos extras son todos independientes,...llevan sus librerias dentro y todo , asi que no tiene por que fallar ninguno.


aunque creo que estas usando de wifislax 4.2 y no de los extras tematicos que hay por el server.  ^-^
extras tematicos?donde?me interesan pero no los encuentro

pues entonces ahora si que vas a flipar en colorines....hay de todo.

vete a modulos ...wifislax-4.3 , no son oficiales aun , y los referntes a drivers han cambiado varias veces por temas de kernel ,pero el resto ,...son ya usables 100x100

https://foro.seguridadwireless.net/colaboracion-y-desarrollo-de-nuestras-lives/ftp-desarrollo-live-(-recordatorio-)/



Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #61 en: 05-12-2012, 22:48 (Miércoles) »

warcry

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #62 en: 05-12-2012, 22:50 (Miércoles) »
madiquita

wifislax 5  ???  ???  ???

que susto me has pegao, si es la x64  ;D ;D ;D

ya te vale  >:D

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #63 en: 05-12-2012, 22:54 (Miércoles) »
madiquita

wifislax 5  ???  ???  ???

que susto me has pegao, si es la x64  ;D ;D ;D

ya te vale  >:D

eso fue una ida de pinza d elas mias.

cuando prepare la version x64 , tube la idea de tenr la linea de version 5 , para lives de 64 bits y las de 32 bits , en la linea 4.x , pero como mi cabezita da tantas vueltas y al final consegui tenerlo todo en una sola live, ..pues .... ^-^ ^-^

y no puedo cambiar el nombre , ya que si no todos los sitios que pusieron la noticia y el mismo google , ...tendrian links no validos indexados.

mi idea de pasar a version 5, sera cuando salga kde 5 , que vendra con qt5 ....

warcry

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #64 en: 05-12-2012, 22:58 (Miércoles) »

eso fue una ida de pinza d elas mias.

de vez en cuando a todos nos patina la neurona y nos rebota contras las paredes huecas del craneo,   ;D ;D ;D


mi idea de pasar a version 5, sera cuando salga kde 5 , que vendra con qt5 ....

por un momento habia pensado que habia salido el kde 5 y ya estabas en el ajo  >:D

sol666

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #65 en: 05-12-2012, 23:15 (Miércoles) »
pues acabo de probar el hashcat,jdownloader y el vlc y funcionan todos.

los  modulos extras son todos independientes,...llevan sus librerias dentro y todo , asi que no tiene por que fallar ninguno.


aunque creo que estas usando de wifislax 4.2 y no de los extras tematicos que hay por el server.  ^-^
extras tematicos?donde?me interesan pero no los encuentro

pues entonces ahora si que vas a flipar en colorines....hay de todo.

vete a modulos ...wifislax-4.3 , no son oficiales aun , y los referntes a drivers han cambiado varias veces por temas de kernel ,pero el resto ,...son ya usables 100x100

https://foro.seguridadwireless.net/colaboracion-y-desarrollo-de-nuestras-lives/ftp-desarrollo-live-(-recordatorio-)/
Muchas gracias usuarionuevo de verdad que bueno y atento eres,hala a descargar y a añadir modulos.

warcry

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #66 en: 05-12-2012, 23:20 (Miércoles) »
lo unico es que teneis que tener presente que se esta probando una rc y no se va a dar soporte a problemas que tengais, hasta que no se publique la final.

y se esta probando la base, de nada sirve probar una base y que te de fallo porque le has metido 20 cosas de tu cosecha  ;)

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #67 en: 05-12-2012, 23:34 (Miércoles) »
lo unico es que teneis que tener presente que se esta probando una rc y no se va a dar soporte a problemas que tengais, hasta que no se publique la final.

y se esta probando la base, de nada sirve probar una base y que te de fallo porque le has metido 20 cosas de tu cosecha  ;)

esos son modulos oficiales , estan probados ya , ...lo que si que voy  a pasar rato es de actualizarlos, pòr que por ejemplo salio version nueva de vlc y openoffice...entre otros.

si detectais algo raro , debereis quitarlos todos y arrancar para ver si es de base , o por algo añadido despues.


cuando todo salga de forma oficial hablamos de gobierno.

bywarrior

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #68 en: 06-12-2012, 01:15 (Jueves) »
Tengo una duda talvez estupida para ustedes que ya saben , yo soy nuevo en esto apenas 2 dias que vi el wifislax y de verdad me agrado mucho, mi duda es la siguiente
en el make_iso.bat me aparece esto:


que me falta hacer o que hice mal orienteme porfavor

bywarrior

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #69 en: 06-12-2012, 01:16 (Jueves) »
e descargado unos modulos y quiero agregarcelos a la rc6

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #70 en: 06-12-2012, 01:26 (Jueves) »
e descargado unos modulos y quiero agregarcelos a la rc6


pues los metes en la carpeta modules antes de arrancar.

el make iso no es para eso.

bywarrior

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #71 en: 06-12-2012, 01:29 (Jueves) »
e descargado unos modulos y quiero agregarcelos a la rc6


pues los metes en la carpeta modules antes de arrancar.

el make iso no es para eso.

o dios k mal estoy XD

para que es el make_iso?

bywarrior

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #72 en: 06-12-2012, 01:43 (Jueves) »
copie los nuevos modilos los agrege a la carpeta modules y no funciono =(

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #73 en: 06-12-2012, 01:46 (Jueves) »
copie los nuevos modilos los agrege a la carpeta modules y no funciono =(

por que lo haces mal.  ;D


ANTES , ANTES , ANTES ,..DE ARRANCAR...SI ES UN LICD NO PODRAS...SOLO SI ES USB ..O EDITAS LA ISO...Y LA VUELVES A GRABAR.

bywarrior

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #74 en: 06-12-2012, 01:48 (Jueves) »
copie los nuevos modilos los agrege a la carpeta modules y no funciono =(

por que lo haces mal.  ;D


ANTES , ANTES , ANTES ,..DE ARRANCAR...SI ES UN LICD NO PODRAS...SOLO SI ES USB ..O EDITAS LA ISO...Y LA VUELVES A GRABAR.

eso hice maestro edite la iso y la carge a la usb y nada

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #75 en: 06-12-2012, 01:55 (Jueves) »
copie los nuevos modilos los agrege a la carpeta modules y no funciono =(

por que lo haces mal.  ;D


ANTES , ANTES , ANTES ,..DE ARRANCAR...SI ES UN LICD NO PODRAS...SOLO SI ES USB ..O EDITAS LA ISO...Y LA VUELVES A GRABAR.

eso hice maestro edite la iso y la carge a la usb y nada

Y LA ISO AHORA ES MAS GRANDE DE LOS 515 MEGAS QUE TENIA ??

si hubiese estado bien hecho no tendrias problemas, ademas ,,,.....si usas un usb para cargar el livecd , no necesotas editar nada...


en el pendrive tendras

boot
wifislax


dentro de wifislax estara modules ....hay dentro debes copiarlos ,.

bywarrior

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #76 en: 06-12-2012, 01:58 (Jueves) »
tyengo memorias kingston sera por eso?
y el tamano de la iso aumento a 6xx mb

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #77 en: 06-12-2012, 02:02 (Jueves) »
tyengo memorias kingston sera por eso?
y el tamano de la iso aumento a 6xx mb

lo estas haciendo mal ...

en la iso nueva, ¿¿ estas seguro qure metiste los xzm , dentro de la carpeta modules ?  ....

y te repito , si estas en una usb , no necesitas editar la iso ni leches en vinagre.


explora la memoria usb y encuentra de una vez, la carpeta modules..y hecha alli los xzm ,,no hay mas misterio , si no funciona es que lo estas haciendo mal.


mira si en tu memoria usb , en la carpeta modules dentro hay algo .... ^-^

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14471
Re: wifislax-4.3-rc6
« Respuesta #78 en: 06-12-2012, 02:06 (Jueves) »
repito que si estas en memoria usb no necesitas experimentos.


AUN ASI , te dejo un guia ,...es de otra distribucion la cual ya no hacemos, y la extension de fichero es lzm en vez de zxm  ,pero se comprende enseguida.

https://foro.seguridadwireless.net/live-cd-wifiway/(guia)-modificar-la-iso-de-wifiway-sin-perder-el-autorranque/

xexudj89

  • Visitante
Re: wifislax-4.3-rc6
« Respuesta #79 en: 06-12-2012, 03:14 (Jueves) »
Hola a todos,lo primero mis felecitaciones a los creadores de esta version de wifislax es excelente,he detectado algo que me preocupa.tengo una alpha de 1 w,la conecto al ordenador,me la detecta como wlan1,bien por ahora todo bien,pero al ponerla en modo monitor,y ejecutar airodump-ng para ver las redes de la zona y detecto que me detecta pocas redes,una de dos es un problema en wifislax,o es que mi alpha esta pidiendo que la mande a mejor vida.... probare en windows aver si con sus drivers en windows como va la cosa.luego la ultima cosa con la primera opcion dentro del el modo normal,el raton no se me mueve,tengo que ejecutar la tercera opcion,dejo una captura de dmesg.por si sirve de algo.

Saludos

Citar
wifislax ~ # dmesg
[    0.051745] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
[    0.051755] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.051764] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.051777] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.051785] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.051795] pci 0000:00:1c.2:   bridge window [mem 0xe6000000-0xe60fffff]
[    0.051804] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.051820] pci 0000:04:06.0: BAR 6: assigned [mem 0x80600000-0x8061ffff pref]
[    0.051829] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.051836] pci 0000:00:1e.0:   bridge window [io  0x9000-0xafff]
[    0.051846] pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.051856] pci 0000:00:1e.0:   bridge window [mem 0x80600000-0x806fffff pref]
[    0.051877] pci 0000:00:01.0: found PCI INT A -> IRQ 11
[    0.051890] pci 0000:00:01.0: sharing IRQ 11 with 0000:00:1b.0
[    0.051900] pci 0000:00:01.0: sharing IRQ 11 with 0000:00:1c.0
[    0.051915] pci 0000:00:01.0: sharing IRQ 11 with 0000:00:1d.3
[    0.051949] pci 0000:00:1c.0: found PCI INT A -> IRQ 11
[    0.051959] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:01.0
[    0.051967] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1b.0
[    0.051983] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.3
[    0.052074] PCI: setting IRQ 9 as level-triggered
[    0.052080] pci 0000:00:1c.2: found PCI INT C -> IRQ 9
[    0.052100] pci 0000:00:1c.2: sharing IRQ 9 with 0000:00:1d.2
[    0.052121] pci 0000:00:1c.2: sharing IRQ 9 with 0000:03:00.0
[    0.052140] pci 0000:00:1e.0: setting latency timer to 64
[    0.052147] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.052151] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.052154] pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
[    0.052158] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe3ffffff]
[    0.052162] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.052165] pci_bus 0000:02: resource 0 [io  0x7000-0x7fff]
[    0.052169] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[    0.052173] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.052176] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.052180] pci_bus 0000:03: resource 1 [mem 0xe6000000-0xe60fffff]
[    0.052183] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.052187] pci_bus 0000:04: resource 0 [io  0x9000-0xafff]
[    0.052190] pci_bus 0000:04: resource 1 [mem 0xe4000000-0xe5ffffff]
[    0.052194] pci_bus 0000:04: resource 2 [mem 0x80600000-0x806fffff pref]
[    0.052197] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.052201] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[    0.052205] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.052208] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffff]
[    0.052251] NET: Registered protocol family 2
[    0.052335] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.052527] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.053150] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.053467] TCP: Hash tables configured (established 131072 bind 65536)
[    0.053474] TCP: reno registered
[    0.053480] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.053496] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.053576] NET: Registered protocol family 1
[    0.053619] PCI: setting IRQ 10 as level-triggered
[    0.053626] pci 0000:00:1d.0: found PCI INT A -> IRQ 10
[    0.053651] pci 0000:00:1d.0: sharing IRQ 10 with 0000:00:1d.7
[    0.053676] pci 0000:00:1d.0: sharing IRQ 10 with 0000:04:07.0
[    0.053709] pci 0000:00:1d.1: found PCI INT B -> IRQ 11
[    0.053736] pci 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.2
[    0.053745] pci 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.3
[    0.053785] pci 0000:00:1d.2: found PCI INT C -> IRQ 9
[    0.053801] pci 0000:00:1d.2: sharing IRQ 9 with 0000:00:1c.2
[    0.053827] pci 0000:00:1d.2: sharing IRQ 9 with 0000:03:00.0
[    0.053863] pci 0000:00:1d.3: found PCI INT D -> IRQ 11
[    0.053873] pci 0000:00:1d.3: sharing IRQ 11 with 0000:00:01.0
[    0.053882] pci 0000:00:1d.3: sharing IRQ 11 with 0000:00:1b.0
[    0.053890] pci 0000:00:1d.3: sharing IRQ 11 with 0000:00:1c.0
[    0.053948] pci 0000:00:1d.7: found PCI INT A -> IRQ 10
[    0.053963] pci 0000:00:1d.7: sharing IRQ 10 with 0000:00:1d.0
[    0.053993] pci 0000:00:1d.7: sharing IRQ 10 with 0000:04:07.0
[    0.054095] pci 0000:01:00.0: Boot video device
[    0.054110] PCI: CLS 32 bytes, default 64
[    0.054178] Trying to unpack rootfs image as initramfs...
[    0.055362] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    0.057450] Freeing initrd memory: 1852k freed
[    0.059712] highmem bounce pool size: 64 pages
[    0.065128] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.065340] fuse init (API version 7.19)
[    0.065559] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.066493] aufs 3.5-20121126
[    0.066506] msgmni has been set to 1729
[    0.066758] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.066769] io scheduler noop registered
[    0.066782] io scheduler cfq registered (default)
[    0.072500] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1
[    0.072508] crc32: self tests passed, processed 225944 bytes in 2795745 nsec
[    0.075511] crc32c: CRC_LE_BITS = 1
[    0.075517] crc32c: self tests passed, processed 225944 bytes in 1470508 nsec
[    0.076265] vesafb: mode is 800x600x16, linelength=1600, pages=2
[    0.076273] vesafb: protected mode interface info at c000:b580
[    0.076281] vesafb: pmi: set display start = c00cb5e3, set palette = c00cb63e
[    0.076287] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[    0.076313] vesafb: scrolling: redraw
[    0.076320] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.076506] vesafb: framebuffer at 0xe1000000, mapped to 0xf8080000, using 1875k, total 14336k
[    0.096745] Console: switching to colour frame buffer device 100x37
[    0.116681] fb0: VESA VGA frame buffer device
[    0.117042] isapnp: Scanning for PnP cards...
[    0.429749] isapnp: No Plug & Play device found
[    0.466735] brd: module loaded
[    0.468568] loop: module loaded
[    0.477804] ata_piix 0000:00:1f.2: version 2.13
[    0.477825] ata_piix 0000:00:1f.2: found PCI INT B -> IRQ 11
[    0.486054] ata_piix 0000:00:1f.2: sharing IRQ 11 with 0000:00:1d.1
[    0.494116] ata_piix 0000:00:1f.2: sharing IRQ 11 with 0000:00:1f.3
[    0.501876] ata_piix 0000:00:1f.2: MAP [
[    0.509270]  IDE IDE P1 P3 ]
[    0.516667] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.517340] scsi0 : ata_piix
[    0.524781] scsi1 : ata_piix
[    0.531903] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.539112] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.548067] pata_it821x 0000:04:06.0: found PCI INT A -> IRQ 10
[    0.555382] pata_it821x: controller in smart mode.
[    0.562563] pata_it821x 0000:04:06.0: setting latency timer to 64
[    0.572598] it821x_firmware_command: timeout
[    0.580271] scsi2 : pata_it821x
[    0.587292] scsi3 : pata_it821x
[    0.594081] ata3: PATA max UDMA/133 cmd 0x9410 ctl 0x9800 bmdma 0xa400 irq 10
[    0.600938] ata4: PATA max UDMA/133 cmd 0x9c10 ctl 0xa000 bmdma 0xa408 irq 10
[    0.609580] Fusion MPT base driver 3.04.20
[    0.616208] Copyright (c) 1999-2008 LSI Corporation
[    0.622780] Fusion MPT SPI Host driver 3.04.20
[    0.629264] Fusion MPT FC Host driver 3.04.20
[    0.635691] Fusion MPT SAS Host driver 3.04.20
[    0.642165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.648690] ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 10
[    0.655035] ehci_hcd 0000:00:1d.7: sharing IRQ 10 with 0000:00:1d.0
[    0.661264] ehci_hcd 0000:00:1d.7: sharing IRQ 10 with 0000:04:07.0
[    0.667236] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.667242] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.673129] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.679230] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.689155] ehci_hcd 0000:00:1d.7: Enabling legacy PCI PM
[    0.695224] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.695235] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe6104000
[    0.714619] ata2.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
[    0.720757] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.727553] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.734128] ata2.01: ATA-8: ST31000528AS, CC35, max UDMA/133
[    0.740745] ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.747840] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A301, max UDMA/33
[    0.755377] hub 1-0:1.0: USB hub found
[    0.762314] hub 1-0:1.0: 8 ports detected
[    0.769823] ata2.00: configured for UDMA/133
[    0.776948] ata1.01: configured for UDMA/33
[    0.783848] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.791053] ata2.01: configured for UDMA/133
[    0.797930] uhci_hcd: USB Universal Host Controller Interface driver
[    0.805345] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 10
[    0.812565] uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:00:1d.7
[    0.820053] uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:04:07.0
[    0.827146] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4040B A301 PQ: 0 ANSI: 5
[    0.834498] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.834503] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.841772] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.849280] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000bc00
[    0.857200] hub 2-0:1.0: USB hub found
[    0.864614] hub 2-0:1.0: 2 ports detected
[    0.871817] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.879333] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.887155] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11
[    0.894953] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.2
[    0.902719] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.3
[    0.910302] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.910307] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.918086] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    0.918353] scsi 1:0:0:0: Direct-Access     ATA      ST1000DL002-9TT1 CC32 PQ: 0 ANSI: 5
[    0.926543] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    0.934607] sd 1:0:0:0: [sda] Write Protect is off
[    0.942353] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.942391] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.958188] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.966349] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b000
[    0.974626] hub 3-0:1.0: USB hub found
[    0.982459] hub 3-0:1.0: 2 ports detected
[    0.990423] uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 9
[    0.998434] uhci_hcd 0000:00:1d.2: sharing IRQ 9 with 0000:00:1c.2
[    1.006599] uhci_hcd 0000:00:1d.2: sharing IRQ 9 with 0000:03:00.0
[    1.014526] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.014532] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.022274] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.030325] uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000b400
[    1.038252] hub 4-0:1.0: USB hub found
[    1.045872] hub 4-0:1.0: 2 ports detected
[    1.053632] uhci_hcd 0000:00:1d.3: found PCI INT D -> IRQ 11
[    1.061296] Refined TSC clocksource calibration: 2813.522 MHz.
[    1.068861] Switching to clocksource tsc
[    1.076372] uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:01.0
[    1.084075] usb 1-6: new high-speed USB device number 2 using ehci_hcd
[    1.091904] uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:1b.0
[    1.100325] uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:1c.0
[    1.108095] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.108101] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.115556] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.123119] uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000b800
[    1.130653]  sda: sda1 sda2 sda3
[    1.138723] hub 5-0:1.0: USB hub found
[    1.146278] hub 5-0:1.0: 2 ports detected
[    1.154305] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.161588] scsi 1:0:1:0: Direct-Access     ATA      ST31000528AS     CC35 PQ: 0 ANSI: 5
[    1.169205] Initializing USB Mass Storage driver...
[    1.176624] usbcore: registered new interface driver usb-storage
[    1.183805] USB Mass Storage support registered.
[    1.190926] sd 1:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.198325] sd 1:0:1:0: [sdb] Write Protect is off
[    1.205530] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.205588] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.220514] usbcore: registered new interface driver ums-alauda
[    1.228421] usbcore: registered new interface driver ums-cypress
[    1.236380] usbcore: registered new interface driver ums-datafab
[    1.244197] usbcore: registered new interface driver ums_eneub6250
[    1.251837] usbcore: registered new interface driver ums-freecom
[    1.259310] usbcore: registered new interface driver ums-isd200
[    1.266610] usbcore: registered new interface driver ums-jumpshot
[    1.273904] usbcore: registered new interface driver ums-karma
[    1.281303] usbcore: registered new interface driver ums-onetouch
[    1.288348] usbcore: registered new interface driver ums-realtek
[    1.295045] usbcore: registered new interface driver ums-sddr09
[    1.301608] usbcore: registered new interface driver ums-sddr55
[    1.307696] scsi4 : usb-storage 1-6:1.0
[    1.313610] usbcore: registered new interface driver ums-usbat
[    1.319833]  sdb: sdb1 sdb2 < sdb5 >
[    1.326568] i8042: PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[    1.335271] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.342817] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.349274] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.355964] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.362551] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    1.369398] EISA: Probing bus 0 at eisa.0
[    1.375865] Cannot allocate resource for EISA slot 1
[    1.382566] Cannot allocate resource for EISA slot 7
[    1.388772] Cannot allocate resource for EISA slot 8
[    1.394668] EISA: Detected 0 cards.
[    1.400310] cpuidle: using governor ladder
[    1.405890] cpuidle: using governor menu
[    1.411340] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.417175] usbcore: registered new interface driver usbhid
[    1.422748] usbhid: USB HID core driver
[    1.428733] zram: num_devices not specified. Using default: 1
[    1.434676] usb 1-7: new high-speed USB device number 3 using ehci_hcd
[    1.440912] zram: Creating 1 devices ...
[    1.447641] ashmem: initialized
[    1.454187] logger: created 256K log 'log_main'
[    1.460850] logger: created 256K log 'log_events'
[    1.467523] logger: created 256K log 'log_radio'
[    1.474190] logger: created 256K log 'log_system'
[    1.480947] fujitsu_tablet: Unknown (using defaults)
[    1.487829] TCP: cubic registered
[    1.494669] NET: Registered protocol family 17
[    1.502269] Using IPI No-Shortcut mode
[    1.509181] registered taskstats version 1
[    1.516123] rtc_cmos 00:03: setting system clock to 2012-12-06 03:05:33 UTC (1354763133)
[    1.523101] RAMDISK: xz image found at block 0
[    1.574048] hub 1-7:1.0: USB hub found
[    1.590311] hub 1-7:1.0: 4 ports detected
[    1.714030] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[    1.936322] usb 1-7.1: new high-speed USB device number 5 using ehci_hcd
[    2.062025] scsi5 : usb-storage 1-7.1:1.0
[    2.100243] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[    2.107623] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[    2.115147] VFS: Mounted root (ext4 filesystem) on device 1:0.
[    2.122850] Freeing unused kernel memory: 540k freed
[    2.166327] usb 1-7.3: new high-speed USB device number 6 using ehci_hcd
[    2.329467] scsi 4:0:0:0: Direct-Access     TDKMedia Trans-It Drive   PMAP PQ: 0 ANSI: 0 CCS
[    2.332707] sd 4:0:0:0: [sdc] 15638528 512-byte logical blocks: (8.00 GB/7.45 GiB)
[    2.333236] sd 4:0:0:0: [sdc] Write Protect is off
[    2.333243] sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
[    2.333699] sd 4:0:0:0: [sdc] No Caching mode page present
[    2.333704] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    2.338319] sd 4:0:0:0: [sdc] No Caching mode page present
[    2.338325] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    2.339466]  sdc: sdc1
[    2.342692] sd 4:0:0:0: [sdc] No Caching mode page present
[    2.342698] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    2.342702] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    2.399318] usb 1-7.4: new full-speed USB device number 7 using ehci_hcd
[    2.481714] input: Burr-Brown from TI               USB Audio CODEC  as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.4/1-7.4:1.3/input/input1
[    2.482419] hid-generic 0003:08BB:2900.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI               USB Audio CODEC ] on usb-0000:00:1d.7-7.4/input3
[    3.268472] scsi 5:0:0:0: Direct-Access     TDKMedia Trans-It Drive   PMAP PQ: 0 ANSI: 0 CCS
[    3.504897] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    3.844464] sd 5:0:0:0: [sdd] 7810176 512-byte logical blocks: (3.99 GB/3.72 GiB)
[    3.844949] sd 5:0:0:0: [sdd] Write Protect is off
[    3.844955] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
[    3.845453] sd 5:0:0:0: [sdd] No Caching mode page present
[    3.845459] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[    3.851611] sd 5:0:0:0: [sdd] No Caching mode page present
[    3.851618] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[    3.883347]  sdd: sdd1
[    3.886944] sd 5:0:0:0: [sdd] No Caching mode page present
[    3.886950] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[    3.886954] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[    4.314727] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    8.001169] udevd[1797]: starting version 182
[    9.610756] i801_smbus 0000:00:1f.3: found PCI INT B -> IRQ 11
[    9.610778] i801_smbus 0000:00:1f.3: sharing IRQ 11 with 0000:00:1d.1
[    9.610793] i801_smbus 0000:00:1f.3: sharing IRQ 11 with 0000:00:1f.2
[    9.610812] ACPI Exception: AE_BAD_PARAMETER, Thread 4099115744 could not acquire Mutex [0x1] (20120320/utmutex-276)
[    9.709932] snd_hda_intel 0000:00:1b.0: found PCI INT A -> IRQ 11
[    9.709944] snd_hda_intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:01.0
[    9.709952] snd_hda_intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:1c.0
[    9.709966] snd_hda_intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:1d.3
[    9.783599] usbcore: registered new interface driver snd-usb-audio
[    9.972204] Linux agpgart interface v0.103
[   10.199747] cfg80211: Calling CRDA to update world regulatory domain
[   10.206272] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[   10.335353] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[   10.335574] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   10.335778] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   10.340021] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.340240] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.341213] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.341418] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.341620] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.574782] tg3.c:v3.123 (March 21, 2012)
[   10.574805] tg3 0000:03:00.0: found PCI INT A -> IRQ 9
[   10.574820] tg3 0000:03:00.0: sharing IRQ 9 with 0000:00:1c.2
[   10.574829] tg3 0000:03:00.0: sharing IRQ 9 with 0000:00:1d.2
[   10.633878] Linux media interface: v0.10
[   10.674603] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95789) rev 4101] (PCI Express) MAC address 00:14:85:35:d7:9f
[   10.674611] tg3 0000:03:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   10.674616] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   10.674621] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   10.692442] intel_rng: FWH not detected
[   10.808520] mousedev: PS/2 mouse device common for all mice
[   10.847378] firewire_ohci 0000:04:07.0: found PCI INT A -> IRQ 10
[   10.847397] firewire_ohci 0000:04:07.0: sharing IRQ 10 with 0000:00:1d.0
[   10.847409] firewire_ohci 0000:04:07.0: sharing IRQ 10 with 0000:00:1d.7
[   10.898105] firewire_ohci 0000:04:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[   10.917236] Linux video capture interface: v2.00
[   11.105074] ACPI Exception: AE_BAD_PARAMETER, Thread 4099120384 could not acquire Mutex [0x1] (20120320/utmutex-276)
[   11.105085] ACPI Exception: AE_BAD_PARAMETER, Thread 4099120384 could not acquire Mutex [0x1] (20120320/utmutex-276)
[   11.105097] ACPI Exception: AE_BAD_PARAMETER, Thread 4099120384 could not acquire Mutex [0x1] (20120320/utmutex-276)
[   11.105212] ACPI Exception: AE_BAD_PARAMETER, Thread 4099120384 could not acquire Mutex [0x1] (20120320/utmutex-276)
[   11.105224] ACPI Exception: AE_BAD_PARAMETER, Thread 4099120384 could not acquire Mutex [0x1] (20120320/utmutex-276)
[   11.167361] cfg80211: World regulatory domain updated:
[   11.167368] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.167372] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 3000 mBm)
[   11.336778] PCI: setting IRQ 5 as level-triggered
[   11.336788] rtl8180 0000:04:00.0: found PCI INT A -> IRQ 5
[   11.399143] firewire_core 0000:04:07.0: created device fw0: GUID 001485560036936f, S800
[   11.529462] uvcvideo: Found UVC 1.00 device Saturn USB 2.0 Camera. (0ac8:c303)
[   11.532399] input: Saturn USB 2.0 Camera. as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.3/1-7.3:1.0/input/input11
[   11.532509] usbcore: registered new interface driver uvcvideo
[   11.532512] USB Video Class driver (1.1.1)
[   11.593702] leds_ss4200: no LED devices found
[   11.652544] [drm] Initialized drm 1.1.0 20060810
[   11.687159] gpio_ich: GPIO from 206 to 255 on gpio_ich
[   11.751450] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   11.751699] ieee80211 phy1: hwaddr 00116b63e024, RTL8185vD + rtl8225z2
[   11.758750] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.758968] ieee80211 phy0: hwaddr 00:c0:ca:4e:ed:d4, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[   11.769822] rtl8187: Customer ID is 0xFF
[   11.769890] Registered led device: rtl8187-phy0::radio
[   11.769923] Registered led device: rtl8187-phy0::tx
[   11.769954] Registered led device: rtl8187-phy0::rx
[   11.772063] rtl8187: wireless switch is on
[   11.772119] usbcore: registered new interface driver rtl8187
[   17.014745] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   26.669144] NET: Registered protocol family 10
[   35.313883] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   39.541282] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   40.928797] mtrr: base(0xe1000000) is not aligned on a size(0xe00000) boundary
[   41.992691] tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex
[   41.992698] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[   41.992859] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   46.227881] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   47.085156] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   47.653200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   50.367949] tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex
[   50.367956] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[   50.368138] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  174.868345] device mon0 entered promiscuous mode