Alguien ha conseguido escanear redes con la TP-LINK TL-WN722N o con la AWUS036NHA? Yo ni desde Luci,desde terminal si he conseguido pero no soy capaz de conectarme que comandos hay que poner???, desde luci se queda la pantalla en blanco y no aparece nada
Citar
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.10.26 (jar@jar-virtual-machine) (gcc version 4.6. 4 (OpenWrt/Linaro GCC 4.6-2013.05 r39304) ) #1 Thu Jan 16 12:01:13 CET 2014
[ 0.000000] Detected Broadcom 0x6358 CPU revision a1
[ 0.000000] CPU frequency is 300 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] registering 40 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xbe000000
[ 0.000000] board_bcm963xx: CFE version: d081.5003
[ 0.000000] bcm63xx_nvram: nvram checksum failed, contents may be invalid (ex pected 33303436, got 6ad47e10)
[ 0.000000] No bcm_tag found!
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: HW556_B
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802e4ad0, node_mem_map 8100000 0
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 16256
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jff s2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 61368k/65536k available (2379k kernel code, 4168k reserve d, 617k data, 264k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.036000] Calibrating delay loop... 297.98 BogoMIPS (lpj=595968)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.064000] registering PCI controller with io_map_base unset
[ 0.084000] bio: create slab <bio-0> at 0
[ 0.092000] PCI host bridge to bus 0000:00
[ 0.096000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 0.100000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
[ 0.104000] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
[ 0.108000] pci 0000:00:01.0: [168c:ff1d] type 00 class 0x020000
[ 0.108000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 0.120000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[ 0.124000] Switching to clocksource MIPS
[ 0.136000] NET: Registered protocol family 2
[ 0.144000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.148000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.156000] TCP: Hash tables configured (established 512 bind 512)
[ 0.164000] TCP: reno registered
[ 0.168000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.172000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.180000] NET: Registered protocol family 1
[ 0.184000] pci 0000:00:01.0: fixup device configuration
[ 0.192000] PCI: CLS 0 bytes, default 16
[ 0.200000] audit: initializing netlink socket (disabled)
[ 0.204000] type=2000 audit(0.203:1): initialized
[ 0.212000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.216000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.228000] msgmni has been set to 119
[ 0.232000] io scheduler noop registered
[ 0.236000] io scheduler deadline registered (default)
[ 0.244000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_ uart
[ 0.252000] console [ttyS0] enabled, bootconsole disabled
[ 0.268000] physmap platform flash device: 02000000 at 1e000000
[ 0.276000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manuf acturer ID 0x0000c2 Chip ID 0x00227a
[ 0.288000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
[ 0.288000] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.292000] Amd/Fujitsu Extended Query version 1.3.
[ 0.296000] number of CFI chips: 1
[ 0.300000] bcm63xxpart: CFE boot tag found with version 8 and board type HW5 56
[ 0.308000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[ 0.316000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 11ff00
[ 0.324000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length e3000 0
[ 0.332000] bcm63xxpart: Partition 3 is cal_data offset f70000 and length 100 00
[ 0.336000] bcm63xxpart: Partition 4 is nvram offset ff0000 and length 10000
[ 0.344000] bcm63xxpart: Partition 5 is linux offset 20000 and length f50000
[ 0.352000] bcm63xxpart: Spare partition is offset 680004 and length 8efffc
[ 0.360000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
[ 0.368000] Creating 6 MTD partitions on "physmap-flash.0":
[ 0.372000] 0x000000000000-0x000000020000 : "CFE"
[ 0.380000] 0x000000020100-0x000000140000 : "kernel"
[ 0.388000] mtd: partition "kernel" must either start or end on erase block b oundary or be smaller than an erase block -- forcing read-only
[ 0.404000] 0x000000140000-0x000000f70000 : "rootfs"
[ 0.412000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.420000] mtd: partition "rootfs_data" created automatically, ofs=0x670000, len=0x900000
[ 0.428000] 0x000000670000-0x000000f70000 : "rootfs_data"
[ 0.436000] 0x000000f70000-0x000000f80000 : "cal_data"
[ 0.444000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.456000] 0x000000020000-0x000000f70000 : "linux"
[ 0.468000] bcm63xx-spi bcm63xx-spi: at 0xfffe0800 (irq 9, FIFOs size 542)
[ 0.484000] libphy: bcm63xx_enet MII bus: probed
[ 0.492000] b53_common: found switch: BCM5325, rev 0
[ 0.500000] bcm63xx_enet bcm63xx_enet.1: attached PHY at address 0 [Broadcom B53 (1)]
[ 0.512000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.532000] TCP: cubic registered
[ 0.536000] NET: Registered protocol family 17
[ 0.540000] 8021q: 802.1Q VLAN Support v1.8
[ 0.556000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.564000] Freeing unused kernel memory: 264K (802fe000 - 80340000)
[ 6.736000] eth0: link UP - 100/full - flow control off
[ 8.068000] usbcore: registered new interface driver usbfs
[ 8.076000] usbcore: registered new interface driver hub
[ 8.080000] usbcore: registered new device driver usb
[ 8.096000] Button Hotplug driver version 0.4.1
[ 8.196000] SCSI subsystem initialized
[ 8.216000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.224000] ehci-platform: EHCI generic platform driver
[ 8.232000] ehci-platform ehci-platform: EHCI Host Controller
[ 8.236000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 8.244000] ehci-platform ehci-platform: irq 18, io mem 0xfffe1300
[ 8.264000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurr ent ignored
[ 8.272000] hub 1-0:1.0: USB hub found
[ 8.276000] hub 1-0:1.0: 2 ports detected
[ 8.288000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.296000] ohci-platform ohci-platform: Generic Platform OHCI Controller
[ 8.304000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
[ 8.312000] ohci-platform ohci-platform: irq 13, io mem 0xfffe1400
[ 8.376000] hub 2-0:1.0: USB hub found
[ 8.380000] hub 2-0:1.0: 1 port detected
[ 8.392000] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.416000] usbcore: registered new interface driver usb-storage
[ 8.424000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/i nput/input0
[ 8.596000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 8.732000] hub 1-1:1.0: USB hub found
[ 8.736000] hub 1-1:1.0: 2 ports detected
[ 9.244000] jffs2: notice: (255) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 107 of xref (0 dead, 96 orphan) found.
[ 9.800000] eth0: link DOWN
[ 12.392000] NET: Registered protocol family 10
[ 12.492000] nf_conntrack version 0.5.0 (963 buckets, 3852 max)
[ 12.512000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.564000] fuse init (API version 7.22)
[ 12.580000] Loading modules backported from Linux version master-2013-11-05-0 -gafa3093
[ 12.588000] Backport generated by backports.git backports-20130802-0-gdb67a3f
[ 12.604000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.676000] usbcore: registered new interface driver ums-alauda
[ 12.688000] usbcore: registered new interface driver ums-cypress
[ 12.700000] usbcore: registered new interface driver ums-datafab
[ 12.708000] usbcore: registered new interface driver ums-freecom
[ 12.720000] usbcore: registered new interface driver ums-isd200
[ 12.732000] usbcore: registered new interface driver ums-jumpshot
[ 12.744000] usbcore: registered new interface driver ums-karma
[ 12.756000] usbcore: registered new interface driver ums-sddr09
[ 12.768000] usbcore: registered new interface driver ums-sddr55
[ 12.780000] usbcore: registered new interface driver ums-usbat
[ 12.792000] usbcore: registered new interface driver usblp
[ 12.840000] xt_time: kernel timezone is -0000
[ 12.900000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.912000] cfg80211: World regulatory domain updated:
[ 12.920000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 12.928000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 12.936000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 12.944000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm)
[ 12.952000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 20 00 mBm)
[ 12.960000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 20 00 mBm)
[ 12.968000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 13.136000] PPP generic driver version 2.4.2
[ 13.144000] NET: Registered protocol family 24
[ 13.188000] usbcore: registered new interface driver rt73usb
[ 13.208000] usbcore: registered new interface driver rtl8187
[ 13.248000] usbcore: registered new interface driver zd1211rw
[ 13.388000] usbcore: registered new interface driver rt2800usb
[ 13.436000] usbcore: registered new interface driver ath9k_htc
[ 13.468000] usbcore: registered new interface driver rtl8192cu
[ 13.520000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[ 13.536000] ath: phy0: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
[ 13.544000] ath: phy0: random mac address will be used: da:0d:df:12:a7:46
[ 13.552000] ath: EEPROM regdomain: 0x0
[ 13.552000] ath: EEPROM indicates default country code should be used
[ 13.552000] ath: doing EEPROM country->regdmn map search
[ 13.552000] ath: country maps to regdmn code: 0x3a
[ 13.552000] ath: Country alpha2 being used: US
[ 13.552000] ath: Regpair used: 0x3a
[ 13.576000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.600000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc06e0000, irq=39
[ 13.640000] cfg80211: Calling CRDA for country: US
[ 13.652000] cfg80211: Regulatory domain changed to country: US
[ 13.656000] cfg80211: DFS Master region FCC
[ 13.660000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 13.668000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 27 00 mBm)
[ 13.676000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 17 00 mBm)
[ 13.684000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 24 00 mBm)
[ 13.692000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 24 00 mBm)
[ 13.700000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 24 00 mBm)
[ 13.708000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 30 00 mBm)
[ 13.716000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 40 00 mBm)
[ 18.028000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.180000] eth0: link UP - 100/full - flow control off
[ 18.192000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.564000] device eth0.1 entered promiscuous mode
[ 26.572000] device eth0 entered promiscuous mode
[ 26.588000] eth0: link UP - 100/full - flow control off
[ 26.592000] br-lan: port 1(eth0.1) entered forwarding state
[ 26.596000] br-lan: port 1(eth0.1) entered forwarding state
[ 28.600000] br-lan: port 1(eth0.1) entered forwarding state
[ 29.652000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.172000] wlan0: authenticate with 50:7e:5d:36:cb:7a
[ 34.188000] wlan0: send auth to 50:7e:5d:36:cb:7a (try 1/3)
[ 34.204000] wlan0: authenticated
[ 34.224000] wlan0: associate with 50:7e:5d:36:cb:7a (try 1/3)
[ 34.240000] wlan0: RX AssocResp from 50:7e:5d:36:cb:7a (capab=0x431 status=0 aid=1)
[ 34.248000] wlan0: associated
[ 34.248000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8038.788000] usb 1-2: new high-speed USB device number 3 using ehci-platform
[ 8038.944000] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 8038.956000] scsi0 : usb-storage 1-2:1.0
[ 8040.144000] scsi 0:0:0:0: Direct-Access TDKMedia Trans-It Drive PMAP PQ : 0 ANSI: 0 CCS
[ 8040.724000] sd 0:0:0:0: [sda] 7810176 512-byte logical blocks: (3.99 GB/3.72 GiB)
[ 8040.732000] sd 0:0:0:0: [sda] Write Protect is off
[ 8040.736000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 8040.740000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8040.744000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8040.760000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8040.764000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8040.804000] sda: sda1
[ 8040.824000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8040.832000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8040.836000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8451.940000] usb 1-2: USB disconnect, device number 3
[10948.636000] usb 1-2: new high-speed USB device number 4 using ehci-platform
[10948.804000] usb 1-2: ath9k_htc: Firmware htc_9271.fw requested
[10949.256000] usb 1-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[10949.588000] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits
[10952.516000] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.3
[10952.524000] ath: EEPROM regdomain: 0x809c
[10952.524000] ath: EEPROM indicates we should expect a country code
[10952.524000] ath: doing EEPROM country->regdmn map search
[10952.524000] ath: country maps to regdmn code: 0x52
[10952.524000] ath: Country alpha2 being used: CN
[10952.524000] ath: Regpair used: 0x52
[10952.624000] ieee80211 phy1: Atheros AR9271 Rev:1
[10952.636000] cfg80211: Calling CRDA for country: CN
[10952.680000] cfg80211: Current regulatory domain intersected:
[10952.692000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[10952.700000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 m Bm)
[10952.708000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 m Bm)
[10952.716000] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 28 00 mBm)
[10952.724000] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 40 00 mBm)
Citar
root@OpenWrt:~# lsusb
Bus 001 Device 002: ID 0424:2502 Standard Microsystems Corp.
Bus 001 Device 004: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@OpenWrt:~#