Autor Tema: [Desarrollo] OpenWrt en Huawei HG556a (Leído 2125251 veces)

xexudj89 · « **Respuesta #2240 en:** 23-08-2014, 16:12 (Sábado) »

La RTL8187L la detecta bien y escanea redes, en cambio la tp link tl-wn722n (AR9271) no escanea redes al darle a explorar se queda la ventana en blanco como cargando y nada.

Un saludo.

root@OpenWrt:~# lsusb
Bus 001 Device 002: ID 0424:2502 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n

dexis · « **Respuesta #2241 en:** 23-08-2014, 16:22 (Sábado) »

¿Existe la posibilidad de que soporte un dongle 4G?

ESTIMULO · « **Respuesta #2242 en:** 25-08-2014, 22:36 (Lunes) »

Cita de: dexis en 23-08-2014, 16:22 (Sábado)

¿Existe la posibilidad de que soporte un dongle 4G?

en teoria una compilacion no muy antigua con soporte para 3g serviria pero yo tampoco la he encontrado.
Un par de paginas mas atras, un compañero ha subido una que ha hecho con 3g pero es para modelos A y la necesitaria para el C.
Conoceis alguna?
Gracias

xexudj89 · « **Respuesta #2243 en:** 25-08-2014, 23:04 (Lunes) »

Alguien ha conseguido escanear redes con la TP-LINK TL-WN722N o con la AWUS036NHA? Yo ni desde Luci,desde terminal si he conseguido pero no soy capaz de conectarme que comandos hay que poner???, desde luci se queda la pantalla en blanco y no aparece nada

Citar
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.10.26 (jar@jar-virtual-machine) (gcc version 4.6. 4 (OpenWrt/Linaro GCC 4.6-2013.05 r39304) ) #1 Thu Jan 16 12:01:13 CET 2014
[ 0.000000] Detected Broadcom 0x6358 CPU revision a1
[ 0.000000] CPU frequency is 300 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] registering 40 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xbe000000
[ 0.000000] board_bcm963xx: CFE version: d081.5003
[ 0.000000] bcm63xx_nvram: nvram checksum failed, contents may be invalid (ex pected 33303436, got 6ad47e10)
[ 0.000000] No bcm_tag found!
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: HW556_B
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802e4ad0, node_mem_map 8100000 0
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 16256
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jff s2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 61368k/65536k available (2379k kernel code, 4168k reserve d, 617k data, 264k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.036000] Calibrating delay loop... 297.98 BogoMIPS (lpj=595968)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.064000] registering PCI controller with io_map_base unset
[ 0.084000] bio: create slab <bio-0> at 0
[ 0.092000] PCI host bridge to bus 0000:00
[ 0.096000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 0.100000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
[ 0.104000] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
[ 0.108000] pci 0000:00:01.0: [168c:ff1d] type 00 class 0x020000
[ 0.108000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 0.120000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[ 0.124000] Switching to clocksource MIPS
[ 0.136000] NET: Registered protocol family 2
[ 0.144000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.148000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.156000] TCP: Hash tables configured (established 512 bind 512)
[ 0.164000] TCP: reno registered
[ 0.168000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.172000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.180000] NET: Registered protocol family 1
[ 0.184000] pci 0000:00:01.0: fixup device configuration
[ 0.192000] PCI: CLS 0 bytes, default 16
[ 0.200000] audit: initializing netlink socket (disabled)
[ 0.204000] type=2000 audit(0.203:1): initialized
[ 0.212000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.216000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.228000] msgmni has been set to 119
[ 0.232000] io scheduler noop registered
[ 0.236000] io scheduler deadline registered (default)
[ 0.244000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_ uart
[ 0.252000] console [ttyS0] enabled, bootconsole disabled
[ 0.268000] physmap platform flash device: 02000000 at 1e000000
[ 0.276000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manuf acturer ID 0x0000c2 Chip ID 0x00227a
[ 0.288000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
[ 0.288000] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.292000] Amd/Fujitsu Extended Query version 1.3.
[ 0.296000] number of CFI chips: 1
[ 0.300000] bcm63xxpart: CFE boot tag found with version 8 and board type HW5 56
[ 0.308000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[ 0.316000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 11ff00
[ 0.324000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length e3000 0
[ 0.332000] bcm63xxpart: Partition 3 is cal_data offset f70000 and length 100 00
[ 0.336000] bcm63xxpart: Partition 4 is nvram offset ff0000 and length 10000
[ 0.344000] bcm63xxpart: Partition 5 is linux offset 20000 and length f50000
[ 0.352000] bcm63xxpart: Spare partition is offset 680004 and length 8efffc
[ 0.360000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
[ 0.368000] Creating 6 MTD partitions on "physmap-flash.0":
[ 0.372000] 0x000000000000-0x000000020000 : "CFE"
[ 0.380000] 0x000000020100-0x000000140000 : "kernel"
[ 0.388000] mtd: partition "kernel" must either start or end on erase block b oundary or be smaller than an erase block -- forcing read-only
[ 0.404000] 0x000000140000-0x000000f70000 : "rootfs"
[ 0.412000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.420000] mtd: partition "rootfs_data" created automatically, ofs=0x670000, len=0x900000
[ 0.428000] 0x000000670000-0x000000f70000 : "rootfs_data"
[ 0.436000] 0x000000f70000-0x000000f80000 : "cal_data"
[ 0.444000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.456000] 0x000000020000-0x000000f70000 : "linux"
[ 0.468000] bcm63xx-spi bcm63xx-spi: at 0xfffe0800 (irq 9, FIFOs size 542)
[ 0.484000] libphy: bcm63xx_enet MII bus: probed
[ 0.492000] b53_common: found switch: BCM5325, rev 0
[ 0.500000] bcm63xx_enet bcm63xx_enet.1: attached PHY at address 0 [Broadcom B53 (1)]
[ 0.512000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.532000] TCP: cubic registered
[ 0.536000] NET: Registered protocol family 17
[ 0.540000] 8021q: 802.1Q VLAN Support v1.8
[ 0.556000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.564000] Freeing unused kernel memory: 264K (802fe000 - 80340000)
[ 6.736000] eth0: link UP - 100/full - flow control off
[ 8.068000] usbcore: registered new interface driver usbfs
[ 8.076000] usbcore: registered new interface driver hub
[ 8.080000] usbcore: registered new device driver usb
[ 8.096000] Button Hotplug driver version 0.4.1
[ 8.196000] SCSI subsystem initialized
[ 8.216000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.224000] ehci-platform: EHCI generic platform driver
[ 8.232000] ehci-platform ehci-platform: EHCI Host Controller
[ 8.236000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 8.244000] ehci-platform ehci-platform: irq 18, io mem 0xfffe1300
[ 8.264000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurr ent ignored
[ 8.272000] hub 1-0:1.0: USB hub found
[ 8.276000] hub 1-0:1.0: 2 ports detected
[ 8.288000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.296000] ohci-platform ohci-platform: Generic Platform OHCI Controller
[ 8.304000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
[ 8.312000] ohci-platform ohci-platform: irq 13, io mem 0xfffe1400
[ 8.376000] hub 2-0:1.0: USB hub found
[ 8.380000] hub 2-0:1.0: 1 port detected
[ 8.392000] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.416000] usbcore: registered new interface driver usb-storage
[ 8.424000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/i nput/input0
[ 8.596000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 8.732000] hub 1-1:1.0: USB hub found
[ 8.736000] hub 1-1:1.0: 2 ports detected
[ 9.244000] jffs2: notice: (255) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 107 of xref (0 dead, 96 orphan) found.
[ 9.800000] eth0: link DOWN
[ 12.392000] NET: Registered protocol family 10
[ 12.492000] nf_conntrack version 0.5.0 (963 buckets, 3852 max)
[ 12.512000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.564000] fuse init (API version 7.22)
[ 12.580000] Loading modules backported from Linux version master-2013-11-05-0 -gafa3093
[ 12.588000] Backport generated by backports.git backports-20130802-0-gdb67a3f
[ 12.604000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.676000] usbcore: registered new interface driver ums-alauda
[ 12.688000] usbcore: registered new interface driver ums-cypress
[ 12.700000] usbcore: registered new interface driver ums-datafab
[ 12.708000] usbcore: registered new interface driver ums-freecom
[ 12.720000] usbcore: registered new interface driver ums-isd200
[ 12.732000] usbcore: registered new interface driver ums-jumpshot
[ 12.744000] usbcore: registered new interface driver ums-karma
[ 12.756000] usbcore: registered new interface driver ums-sddr09
[ 12.768000] usbcore: registered new interface driver ums-sddr55
[ 12.780000] usbcore: registered new interface driver ums-usbat
[ 12.792000] usbcore: registered new interface driver usblp
[ 12.840000] xt_time: kernel timezone is -0000
[ 12.900000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.912000] cfg80211: World regulatory domain updated:
[ 12.920000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 12.928000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 12.936000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 12.944000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm)
[ 12.952000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 20 00 mBm)
[ 12.960000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 20 00 mBm)
[ 12.968000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 13.136000] PPP generic driver version 2.4.2
[ 13.144000] NET: Registered protocol family 24
[ 13.188000] usbcore: registered new interface driver rt73usb
[ 13.208000] usbcore: registered new interface driver rtl8187
[ 13.248000] usbcore: registered new interface driver zd1211rw
[ 13.388000] usbcore: registered new interface driver rt2800usb
[ 13.436000] usbcore: registered new interface driver ath9k_htc
[ 13.468000] usbcore: registered new interface driver rtl8192cu
[ 13.520000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[ 13.536000] ath: phy0: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
[ 13.544000] ath: phy0: random mac address will be used: da:0d:df:12:a7:46
[ 13.552000] ath: EEPROM regdomain: 0x0
[ 13.552000] ath: EEPROM indicates default country code should be used
[ 13.552000] ath: doing EEPROM country->regdmn map search
[ 13.552000] ath: country maps to regdmn code: 0x3a
[ 13.552000] ath: Country alpha2 being used: US
[ 13.552000] ath: Regpair used: 0x3a
[ 13.576000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.600000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc06e0000, irq=39
[ 13.640000] cfg80211: Calling CRDA for country: US
[ 13.652000] cfg80211: Regulatory domain changed to country: US
[ 13.656000] cfg80211: DFS Master region FCC
[ 13.660000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 13.668000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 27 00 mBm)
[ 13.676000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 17 00 mBm)
[ 13.684000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 24 00 mBm)
[ 13.692000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 24 00 mBm)
[ 13.700000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 24 00 mBm)
[ 13.708000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 30 00 mBm)
[ 13.716000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 40 00 mBm)
[ 18.028000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.180000] eth0: link UP - 100/full - flow control off
[ 18.192000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.564000] device eth0.1 entered promiscuous mode
[ 26.572000] device eth0 entered promiscuous mode
[ 26.588000] eth0: link UP - 100/full - flow control off
[ 26.592000] br-lan: port 1(eth0.1) entered forwarding state
[ 26.596000] br-lan: port 1(eth0.1) entered forwarding state
[ 28.600000] br-lan: port 1(eth0.1) entered forwarding state
[ 29.652000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.172000] wlan0: authenticate with 50:7e:5d:36:cb:7a
[ 34.188000] wlan0: send auth to 50:7e:5d:36:cb:7a (try 1/3)
[ 34.204000] wlan0: authenticated
[ 34.224000] wlan0: associate with 50:7e:5d:36:cb:7a (try 1/3)
[ 34.240000] wlan0: RX AssocResp from 50:7e:5d:36:cb:7a (capab=0x431 status=0 aid=1)
[ 34.248000] wlan0: associated
[ 34.248000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8038.788000] usb 1-2: new high-speed USB device number 3 using ehci-platform
[ 8038.944000] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 8038.956000] scsi0 : usb-storage 1-2:1.0
[ 8040.144000] scsi 0:0:0:0: Direct-Access TDKMedia Trans-It Drive PMAP PQ : 0 ANSI: 0 CCS
[ 8040.724000] sd 0:0:0:0: [sda] 7810176 512-byte logical blocks: (3.99 GB/3.72 GiB)
[ 8040.732000] sd 0:0:0:0: [sda] Write Protect is off
[ 8040.736000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 8040.740000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8040.744000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8040.760000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8040.764000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8040.804000] sda: sda1
[ 8040.824000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8040.832000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8040.836000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8451.940000] usb 1-2: USB disconnect, device number 3
[10948.636000] usb 1-2: new high-speed USB device number 4 using ehci-platform
[10948.804000] usb 1-2: ath9k_htc: Firmware htc_9271.fw requested
[10949.256000] usb 1-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[10949.588000] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits
[10952.516000] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.3
[10952.524000] ath: EEPROM regdomain: 0x809c
[10952.524000] ath: EEPROM indicates we should expect a country code
[10952.524000] ath: doing EEPROM country->regdmn map search
[10952.524000] ath: country maps to regdmn code: 0x52
[10952.524000] ath: Country alpha2 being used: CN
[10952.524000] ath: Regpair used: 0x52
[10952.624000] ieee80211 phy1: Atheros AR9271 Rev:1
[10952.636000] cfg80211: Calling CRDA for country: CN
[10952.680000] cfg80211: Current regulatory domain intersected:
[10952.692000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[10952.700000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 m Bm)
[10952.708000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 m Bm)
[10952.716000] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 28 00 mBm)
[10952.724000] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 40 00 mBm)

Citar
root@OpenWrt:~# lsusb
Bus 001 Device 002: ID 0424:2502 Standard Microsystems Corp.
Bus 001 Device 004: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@OpenWrt:~#

Raugo · « **Respuesta #2244 en:** 27-08-2014, 21:56 (Miércoles) »

Buenas, a ver si me podéis echar una mano. Tengo instalada la versión que colgó pissmen con prácticamente todo configurado perfectamente pero tengo un problema que no se como solucionar si es que tiene solución. Lo tengo configurado como cliente y repetidor wifi y ademas con el transmission y el minidlna para bajar vídeos y compartirlos con la TV y es aqui donde tengo el problema la TV esta en la red principal y no "ve" al minidlna. ¿Como podría hacer para que el minidlna transmitiera hasta la red principal? O hacer que el router a pesar de estar en modo cliente wifi este en la misma red.

Saludos

cimbor · « **Respuesta #2245 en:** 28-08-2014, 00:39 (Jueves) »

Cita de: Raugo en 27-08-2014, 21:56 (Miércoles)

Buenas, a ver si me podéis echar una mano. Tengo instalada la versión que colgó pissmen con prácticamente todo configurado perfectamente pero tengo un problema que no se como solucionar si es que tiene solución. Lo tengo configurado como cliente y repetidor wifi y ademas con el transmission y el minidlna para bajar vídeos y compartirlos con la TV y es aqui donde tengo el problema la TV esta en la red principal y no "ve" al minidlna. ¿Como podría hacer para que el minidlna transmitiera hasta la red principal? O hacer que el router a pesar de estar en modo cliente wifi este en la misma red.

Saludos

Tienes que ver cómo se llama la red a que está conectada la televisión, por ejemplo si está conectada por cable lo normal es que éste conectada a la red principal(br-lan) a menos que hayas creado otras para hacer vlan o algo así. Edita el fichero /etc/config/minidlna y pon el nombre de la red a la que conecta la tele en la opción interface:

option interface 'br-lan'

ijoy74 · « **Respuesta #2246 en:** 28-08-2014, 23:47 (Jueves) »

Cita de: dexis en 23-08-2014, 16:22 (Sábado)

¿Existe la posibilidad de que soporte un dongle 4G?

Ya hay una compilacion hecha y colgada en forocoches que incluye todos los modem 3g y 4g que soporta openwrt
http://www.forocoches.com/foro/showthread.php?p=172190267#post172190267

xexudj89 · « **Respuesta #2247 en:** 01-09-2014, 22:22 (Lunes) »

Alguien sabe por que este router tiene microcortes? es decir jugando al world of tanks o viendo una peli online se cae el internet durante unos segundos, el router emisor es un livebox 2.0 que esta conectado en el canal 7 que es canal mas libre, no se si alguna configuracion en openwrt...

Un saludo

quetzalin · « **Respuesta #2248 en:** 07-09-2014, 23:02 (Domingo) »

Estoy intentando ponerle una de las ultimas versiones de openwrt a este cacharro pero no hay forma de que funcione la wifi.

Es la version con el chipset wifi Ralink.

Esto es lo que veo en el log:

Código: [Seleccionar]

Sun Sep  7 12:16:41 2014 kern.warn kernel: [   20.056000] PCI: Enabling device 0000:00:01.0 (1814 -> 1816)
Sun Sep  7 12:16:41 2014 kern.err kernel: [   20.064000] rt2800pci 0000:00:01.0: failed to load eeprom property
Sun Sep  7 12:16:41 2014 kern.info kernel: [   20.072000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'rt2x00.eeprom'.
Sun Sep  7 12:16:41 2014 kern.warn kernel: [   20.080000] rt2800pci 0000:00:01.0: Direct firmware load failed with error -2
Sun Sep  7 12:16:41 2014 kern.warn kernel: [   20.088000] rt2800pci 0000:00:01.0: Falling back to user helper
Sun Sep  7 12:16:41 2014 kern.err kernel: [   20.300000] ieee80211 phy0: rt2800_probe_rt: Error - Invalid RT chipset 0xffff, rev ffff detected
Sun Sep  7 12:16:41 2014 kern.err kernel: [   20.308000] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device

Sinceramente no se que pasa, he probado tanto con la ultima version trunk como con los repositorios 14.07-rc3 de Noltari. Tambien he restaurado el cal_data por si fuera eso pero nada.

No tengo ni idea de lo que esta pasando, a ver si alguien me echa una mano.

quetzalin · « **Respuesta #2249 en:** 09-09-2014, 19:28 (Martes) »

Creo que es el chipset de la wifi que simplemente ha muerto ya que he metido varios firmware originales y tampoco tira la wifi

.

jar229 · « **Respuesta #2250 en:** 10-09-2014, 08:43 (Miércoles) »

Cita de: quetzalin en 09-09-2014, 19:28 (Martes)

Creo que es el chipset de la wifi que simplemente ha muerto ya que he metido varios firmware originales y tampoco tira la wifi .

En el primer post, tienes explicado cómo recuperar los datos de calibración del wifi.

quetzalin · « **Respuesta #2251 en:** 10-09-2014, 16:31 (Miércoles) »

Cita de: jar229 en 10-09-2014, 08:43 (Miércoles)

Cita de: quetzalin en 09-09-2014, 19:28 (Martes)
Creo que es el chipset de la wifi que simplemente ha muerto ya que he metido varios firmware originales y tampoco tira la wifi .

En el primer post, tienes explicado cómo recuperar los datos de calibración del wifi.

Cita de: quetzalin

Sinceramente no se que pasa, he probado tanto con la ultima version trunk como con los repositorios 14.07-rc3 de Noltari. Tambien he restaurado el cal_data por si fuera eso pero nada.

Es lo primero que he hecho varias veces pero nada.

No se si los errores que me da son los tipicos de cuando se pierden los datos de calibracion, en cualquier caso restaurarlos parece que no funciona.

galaxian · « **Respuesta #2252 en:** 10-09-2014, 21:05 (Miércoles) »

alguien de los presentes ha probado la ultima version de phyton ? como os funciona ?

interfoli · « **Respuesta #2253 en:** 16-09-2014, 21:29 (Martes) »

Hola a todos;

Tengo la versión que se ha publicado en Forocoches por el amigo Alastor21 para los Modems 3G y 4G, pero necesito instalarle Upnp para la Xbox.

He buscado por internet y me dice que tengo que instalar el miniupnpc y el luci-app-upnp (hablo de memoria y podrian escribirse diferente), sin embargo en el repositorio de paquetes no aparece siniguno de los dos y no consigo hacerlo funcionar.

Agradeceria que alguien me explicase sin demasiados tecnicismos como resolver el problema e instalar y activar Upnp, y si es posible que funcione en Luci.

Un saludo

jar229 · « **Respuesta #2254 en:** 17-09-2014, 08:49 (Miércoles) »

Cita de: interfoli en 16-09-2014, 21:29 (Martes)

Hola a todos;

Tengo la versión que se ha publicado en Forocoches por el amigo Alastor21 para los Modems 3G y 4G, pero necesito instalarle Upnp para la Xbox.

He buscado por internet y me dice que tengo que instalar el miniupnpc y el luci-app-upnp (hablo de memoria y podrian escribirse diferente), sin embargo en el repositorio de paquetes no aparece siniguno de los dos y no consigo hacerlo funcionar.

Agradeceria que alguien me explicase sin demasiados tecnicismos como resolver el problema e instalar y activar Upnp, y si es posible que funcione en Luci.

Un saludo

Tienes que modificar la URL del repositorio para poder descargar/instalar los paquetes: [FAQ] Preguntas más comunes sobre OpenWrt

A partir de ahí, actualizas, y luego con instalar luci-app-upnp será suficiente (te instalará también miniupnpc).

interfoli · « **Respuesta #2255 en:** 17-09-2014, 13:09 (Miércoles) »

Hecho todo y funcionando.
Joer que sencillo era y yo le habia dedicado mas de 4 horas para nada.

Un saludo y muchas gracias

xexudj89 · « **Respuesta #2256 en:** 20-09-2014, 01:04 (Sábado) »

Una pregunta seria posible correr alguna herramienta como YAMAS, wpsreaver, GOYSCRIPT, GEMINISAUDITOR en openwrt? o seria imposible por que no se pueden poner los dispositivos wifi en modo monitor?

PD: Estoy buscando para luci algun gestor de archivos, tambien para guardar el log de los clientes que se conectan al wifi que he creado en openwrt (Nunca se sabe...)

Un saludo a todos

jar229 · « **Respuesta #2257 en:** 20-09-2014, 09:23 (Sábado) »

Cita de: Nexus89 en 20-09-2014, 01:04 (Sábado)

Una pregunta seria posible correr alguna herramienta como YAMAS, wpsreaver, GOYSCRIPT, GEMINISAUDITOR en openwrt? o seria imposible por que no se pueden poner los dispositivos wifi en modo monitor?

PD: Estoy buscando para luci algun gestor de archivos, tambien para guardar el log de los clientes que se conectan al wifi que he creado en openwrt (Nunca se sabe...)

Un saludo a todos

Ese tipo de scripts no te van a funcionar. Pero puedes usar reaver, aircrack, bully, etc., para auditar.

Eso sí, el rendimiento, comparado con un PC, es bastante malo.

Como gestor de ficheros, el mejor, sin ninguna duda es Midnigth Comander. Mira el hilo de Utilidades.

Enviado desde uno de mis 'cacharros' usando Tapatalk

aventurer · « **Respuesta #2258 en:** 21-09-2014, 10:08 (Domingo) »

¡Hola!

Una pregunta

¿Hay alguna compilación que incluya el MWAN3?

Gracias

Saludos

jlfrechina53 · « **Respuesta #2259 en:** 21-09-2014, 17:40 (Domingo) »

Tengo el HG556A , he estado mirando las caracteristicas internas con el nº de serie y me dice que tengo la WIFI ATHEROS.
He instalado la ultima version del openwrt :

Citar

[ 0.000000] Linux version 3.14.18 (openwrt@gb-11) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42619) ) #1 Sat Sep 20 03:03:18 UTC 2014
[ 0.000000] Detected Broadcom 0x6358 CPU revision a1

Con mucho esfuerzo ya que no tengo muchos conocimientos sobre el tema, he conseguido instalar el LUCI, un pincho usb de l tipo tl-wn722n que lo tengo configurado como punto de acceso a pleno rendimiento y funcionamiento.

Mi problema es que no detecta la wifi interna del router . Ni la huele .

Citar

[ 0.000000] Linux version 3.14.18 (openwrt@gb-11) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42619) ) #1 Sat Sep 20 03:03:18 UTC 2014
[ 0.000000] Detected Broadcom 0x6358 CPU revision a1
[ 0.000000] CPU frequency is 300 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] registering 40 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xbe000000
[ 0.000000] board_bcm963xx: CFE version: d081.5003
[ 0.000000] bcm63xx_nvram: nvram checksum failed, contents may be invalid (expected 33303536, got 9f0e7f7a)
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0002a010 (Broadcom BMIPS4350)
[ 0.000000] board: board name: HW556_A
[ 0.000000] MIPS: machine is Huawei EchoLife HG556a (version A)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 80354690, node_mem_map 81000be0
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 59920K/65536K available (2683K kernel code, 141K rwdata, 624K rodata, 1280K init, 188K bss, 5616K reserved)
[ 0.000000] NR_IRQS:256
[ 0.032000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.044000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.056000] NET: Registered protocol family 16
[ 0.076000] registering PCI controller with io_map_base unset
[ 0.080000] registering PCI controller with io_map_base unset
[ 0.104000] bio: create slab <bio-0> at 0
[ 0.116000] PCI host bridge to bus 0000:00
[ 0.120000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 0.124000] pci_bus 0000:00: root bus resource [io 0x8000000-0x8007fff]
[ 0.128000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.132000] pci 0000:00:01.0: [168c:ff1d] type 00 class 0x020000
[ 0.132000] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 0.140000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.140000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[ 0.144000] PCI host bridge to bus 0000:01
[ 0.148000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
[ 0.152000] pci_bus 0000:01: root bus resource [io 0x8008000-0x800ffff]
[ 0.156000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.160000] pci 0000:01:1e.0: [14e4:6358] type 02 class 0x060700
[ 0.160000] pci 0000:01:1e.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.164000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[ 0.164000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 05
[ 0.164000] pci 0000:01:1e.0: BAR 10: assigned [mem 0x38000000-0x3fffffff]
[ 0.168000] pci 0000:01:1e.0: BAR 7: assigned [io 0x8008000-0x80080ff]
[ 0.172000] pci 0000:01:1e.0: BAR 8: assigned [io 0x8008400-0x80084ff]
[ 0.176000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
[ 0.180000] pci 0000:01:1e.0: bridge window [io 0x8008000-0x80080ff]
[ 0.184000] pci 0000:01:1e.0: bridge window [io 0x8008400-0x80084ff]
[ 0.188000] pci 0000:01:1e.0: bridge window [mem 0x38000000-0x3fffffff]
[ 0.196000] Switched to clocksource MIPS
[ 0.212000] NET: Registered protocol family 2
[ 0.220000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.228000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.236000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.240000] TCP: reno registered
[ 0.244000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.252000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.256000] NET: Registered protocol family 1
[ 0.264000] pci 0000:00:01.0: fixup device configuration
[ 0.272000] PCI: CLS 0 bytes, default 16
[ 0.280000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.288000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.292000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.304000] msgmni has been set to 117
[ 0.308000] io scheduler noop registered
[ 0.312000] io scheduler deadline registered (default)
[ 0.320000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10, base_baud = 1562500) is a bcm63xx_uart
[ 0.332000] console [ttyS0] enabled
[ 0.340000] bootconsole [early0] disabled
[ 0.356000] 1e000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227a
[ 0.364000] 1e000000.nor: Found an alias at 0x1000000 for the chip at 0x0
[ 0.364000] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.368000] Amd/Fujitsu Extended Query version 1.3.
[ 0.376000] number of CFI chips: 1
[ 0.380000] bcm63xxpart: CFE boot tag found with version 8 and board type HW556
[ 0.388000] 6 bcm63xxpart partitions found on MTD device 1e000000.nor
[ 0.392000] Creating 6 MTD partitions on "1e000000.nor":
[ 0.400000] 0x000000000000-0x000000020000 : "CFE"
[ 0.408000] 0x000000020100-0x000000150000 : "kernel"
[ 0.412000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.432000] 0x000000150000-0x000000ee0000 : "rootfs"
[ 0.440000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.448000] mtd: partition "rootfs_data" created automatically, ofs=0x320000, len=0xbc0000
[ 0.456000] 0x000000320000-0x000000ee0000 : "rootfs_data"
[ 0.468000] 0x000000020000-0x000000ee0000 : "linux"
[ 0.476000] 0x000000ee0000-0x000000fe0000 : "cal_data"
[ 0.488000] 0x000000fe0000-0x000001000000 : "nvram"
[ 0.500000] bcm63xx-spi bcm63xx-spi: at 0xfffe0800 (irq 9, FIFOs size 542)
[ 0.520000] libphy: bcm63xx_enet MII bus: probed
[ 0.588000] b53_common: found switch: BCM5325, rev 0
[ 0.596000] bcm63xx_enet bcm63xx_enet.1: attached PHY at address 0 [Broadcom B53 (1)]
[ 0.608000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.628000] TCP: cubic registered
[ 0.632000] NET: Registered protocol family 17
[ 0.640000] Bridge firewalling registered
[ 0.644000] 8021q: 802.1Q VLAN Support v1.8
[ 0.660000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.688000] Freeing unused kernel memory: 1280K (80370000 - 804b0000)
[ 4.092000] Button Hotplug driver version 0.4.1
[ 4.104000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 5.076000] random: mktemp urandom read with 86 bits of entropy available
[ 6.820000] eth0: link UP - 100/full - flow control off
[ 8.748000] jffs2: notice: (232) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 44 of xref (0 dead, 7 orphan) found.
[ 10.668000] usbcore: registered new interface driver usbfs
[ 10.676000] usbcore: registered new interface driver hub
[ 10.684000] usbcore: registered new device driver usb
[ 10.928000] SCSI subsystem initialized
[ 10.948000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.960000] ehci-platform: EHCI generic platform driver
[ 10.964000] ehci-platform ehci-platform: EHCI Host Controller
[ 10.972000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 10.980000] ehci-platform ehci-platform: irq 18, io mem 0xfffe1300
[ 10.996000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 11.008000] hub 1-0:1.0: USB hub found
[ 11.012000] hub 1-0:1.0: 2 ports detected
[ 11.020000] ehci-pci: EHCI PCI platform driver
[ 11.036000] usbcore: registered new interface driver usb-storage
[ 11.252000] random: nonblocking pool is initialized
[ 11.580000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 11.924000] hub 1-1:1.0: USB hub found
[ 11.928000] hub 1-1:1.0: 2 ports detected
[ 12.028000] eth0: link DOWN
[ 12.052000] usb 1-2: new high-speed USB device number 3 using ehci-platform
[ 17.644000] NET: Registered protocol family 10
[ 17.708000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 17.744000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.792000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 17.800000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 17.940000] cfg80211: Calling CRDA to update world regulatory domain
[ 17.956000] cfg80211: World regulatory domain updated:
[ 17.960000] cfg80211: DFS Master region: unset
[ 17.964000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.976000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.984000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.992000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.000000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.008000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 18.016000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 18.024000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.032000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 18.428000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.468000] nf_conntrack version 0.5.0 (956 buckets, 3824 max)
[ 18.556000] xt_time: kernel timezone is -0000
[ 18.584000] usb 1-2: ath9k_htc: Firmware htc_9271.fw requested
[ 18.604000] usbcore: registered new interface driver ath9k_htc
[ 18.808000] usbcore: registered new interface driver brcmfmac
[ 18.944000] PPP generic driver version 2.4.2
[ 18.956000] NET: Registered protocol family 24
[ 19.148000] usb 1-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 19.384000] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 19.716000] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.3
[ 19.724000] ath: EEPROM regdomain: 0x809c
[ 19.724000] ath: EEPROM indicates we should expect a country code
[ 19.724000] ath: doing EEPROM country->regdmn map search
[ 19.724000] ath: country maps to regdmn code: 0x52
[ 19.724000] ath: Country alpha2 being used: CN
[ 19.724000] ath: Regpair used: 0x52
[ 19.752000] ieee80211 phy0: Atheros AR9271 Rev:1
[ 19.756000] cfg80211: Calling CRDA for country: CN
[ 19.772000] cfg80211: Regulatory domain changed to country: CN
[ 19.780000] cfg80211: DFS Master region: FCC
[ 19.784000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.792000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.800000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A)
[ 19.812000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 19.820000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.828000] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 19.836000] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 19.844000] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 23.548000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.516000] eth0: link UP - 100/full - flow control off
[ 24.524000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.876000] device eth0.1 entered promiscuous mode
[ 33.880000] device eth0 entered promiscuous mode
[ 33.892000] br-lan: port 1(eth0.1) entered forwarding state
[ 33.896000] br-lan: port 1(eth0.1) entered forwarding state
[ 34.440000] eth0: link UP - 100/full - flow control off
[ 35.900000] br-lan: port 1(eth0.1) entered forwarding state
[ 37.416000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.432000] device wlan0 entered promiscuous mode
[ 38.144000] br-lan: port 2(wlan0) entered forwarding state
[ 38.152000] br-lan: port 2(wlan0) entered forwarding state
[ 38.156000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.156000] br-lan: port 2(wlan0) entered forwarding state

He probado casi todo y ya no se que tocar más. A ver si alguien me puede echar una mano .
Gracias.

Noticias:

Autor Tema: [Desarrollo] OpenWrt en Huawei HG556a (Leído 2125251 veces)

xexudj89

dexis

ESTIMULO

xexudj89

Raugo

cimbor

ijoy74

xexudj89

quetzalin

quetzalin

quetzalin

galaxian

interfoli

interfoli

xexudj89

aventurer

jlfrechina53