Autor Tema: [Desarrollo] OpenWrt en Comtrend AR-5387un (Leído 773854 veces)

ragtap · « **Respuesta #40 en:** 27-07-2012, 00:04 (Viernes) »

Que gran proyecto..!

He resucitado mi router y le he instalado el openwrt.

Funciona en modo cliente, pero no consigo que lo haga en modo AP.
El log dice wlan0: link is not ready

y Luci SSID: OpenWrt | Mode: Unknown
Wireless is disabled or not associated

Que puedo estar haciendo mal?

En interfaces solo esta LAN

phullock · « **Respuesta #41 en:** 27-07-2012, 00:08 (Viernes) »

¿Qué es lo que quieres hacer con la Wifi?

Noltari · « **Respuesta #42 en:** 27-07-2012, 00:09 (Viernes) »

Cita de: ragtap en 27-07-2012, 00:04 (Viernes)

Que gran proyecto..!

He resucitado mi router y le he instalado el openwrt.

Funciona en modo cliente, pero no consigo que lo haga en modo AP.
El log dice wlan0: link is not ready

y Luci SSID: OpenWrt | Mode: Unknown
Wireless is disabled or not associated

Que puedo estar haciendo mal?

En interfaces solo esta LAN

No estás haciendo nada mal, el problema es que brcsmac no tiene modo AP xDDD.

Si quieres puedo hacerte una compilación con b43 que sí que lo tiene, pero vas a tener 0.15 Mbps :$...

ragtap · « **Respuesta #43 en:** 27-07-2012, 00:12 (Viernes) »

Lo conecto por LAN a otro router, y teniendo desactivado el dhcp, me sirve como extensión de WIFI. Es un sistema que se puede usar con cualquier router del mercado prácticamente, y es realmente util ademas de ofrecer un rendimiento perfecto.

Para ello solo tengo que configurar el router como un AP normal- ¿Se puede?

ragtap · « **Respuesta #44 en:** 27-07-2012, 00:15 (Viernes) »

Oucht!!!

Prefiero esperar, ya que la razón de usarlo era aprovechar el N.

Por curiosidad...en modo cliente puede conectarse mas velocidad?

[/quote]
No estás haciendo nada mal, el problema es que brcsmac no tiene modo AP xDDD.

Si quieres puedo hacerte una compilación con b43 que sí que lo tiene, pero vas a tener 0.15 Mbps :$...
[/quote]

phullock · « **Respuesta #45 en:** 27-07-2012, 00:24 (Viernes) »

Cita de: Noltari en 27-07-2012, 00:09 (Viernes)

Cita de: ragtap en 27-07-2012, 00:04 (Viernes)
Que gran proyecto..!

He resucitado mi router y le he instalado el openwrt.

Funciona en modo cliente, pero no consigo que lo haga en modo AP.
El log dice wlan0: link is not ready

y Luci SSID: OpenWrt | Mode: Unknown
Wireless is disabled or not associated

Que puedo estar haciendo mal?

En interfaces solo esta LAN

No estás haciendo nada mal, el problema es que brcsmac no tiene modo AP xDDD.

Si quieres puedo hacerte una compilación con b43 que sí que lo tiene, pero vas a tener 0.15 Mbps :$...

Por curiosidad, ¿quitando el cifrado funcionaría en AP?

Noltari · « **Respuesta #46 en:** 27-07-2012, 01:09 (Viernes) »

Cita de: phullock en 27-07-2012, 00:24 (Viernes)

Cita de: Noltari en 27-07-2012, 00:09 (Viernes)
Cita de: ragtap en 27-07-2012, 00:04 (Viernes)
Que gran proyecto..!

He resucitado mi router y le he instalado el openwrt.

Funciona en modo cliente, pero no consigo que lo haga en modo AP.
El log dice wlan0: link is not ready

y Luci SSID: OpenWrt | Mode: Unknown
Wireless is disabled or not associated

Que puedo estar haciendo mal?

En interfaces solo esta LAN

No estás haciendo nada mal, el problema es que brcsmac no tiene modo AP xDDD.

Si quieres puedo hacerte una compilación con b43 que sí que lo tiene, pero vas a tener 0.15 Mbps :$...

Por curiosidad, ¿quitando el cifrado funcionaría en AP?

No creo que afecte el cifrado, sino que no está implementado el modo AP en el driver.

Es una de las "carencias" del driver brcmsmac...
A ver si los de openwrt actualizan un día el driver propietario, soportando así la wlan de este dispositivo.

Por cierto, esto también pasa en el ADB P.DG A4001N.

Saludos.

phullock · « **Respuesta #47 en:** 27-07-2012, 01:14 (Viernes) »

Ah vale, que es por el driver en si. Es que en el comtrend 5361, al tener el driver propietario no era soportado por herramientas como wpa_supplicant y claro, los cifrados no funcionaban. Creo que solo puedes poner el wpad-mini con ese. Para lo demás, b43.

Saludos.

Edit. Por cierto, ya tengo dos ar5387un, uno para trasteo

A ver si mañana le pongo el firm.

Noltari · « **Respuesta #48 en:** 29-07-2012, 14:06 (Domingo) »

Por fin me han aceptado un par de parches de los que tengo en espera:
https://dev.openwrt.org/changeset/32890
https://dev.openwrt.org/changeset/32892

Así que toca actualización, sobre todo por el profile del wifi utilizando brcmsmac.

Firmware actualizado:
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-96328A-1441N1-generic-squashfs-cfe_r32904.bin

Parches SVN actualizados (primer post):
https://dl.dropbox.com/u/4708147/openwrt/6328/6328_svn.patch

Saludos.

jar229 · « **Respuesta #49 en:** 29-07-2012, 15:54 (Domingo) »

Mañana, en cuanto regrese a casa, lo instalo.
Ya contaré ...

Enviado desde mi u8500 usando Tapatalk 2

jar229 · « **Respuesta #50 en:** 31-07-2012, 20:26 (Martes) »

Nuevo firmware instalado y funcionando correctamente

dmesg enviado por mail.

Noltari · « **Respuesta #51 en:** 31-07-2012, 23:53 (Martes) »

Nuevo firmware, con posible soporte USB y los últimos parches cambiados por enésima vez realizando los ajustes que jogo me ha pedido...
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-96328A-1441N1-generic-squashfs-cfe_r32925.bin

USB: https://dev.openwrt.org/changeset/32922

Actualizados también los parches SVN a la última versión (primer post).

Saludos.

ragtap · « **Respuesta #52 en:** 01-08-2012, 02:43 (Miércoles) »

Gracias Noltari por tu trabajo!!

jar229 · « **Respuesta #53 en:** 01-08-2012, 08:44 (Miércoles) »

Cita de: Noltari en 31-07-2012, 23:53 (Martes)

Nuevo firmware, con posible soporte USB y los últimos parches cambiados por enésima vez realizando los ajustes que jogo me ha pedido...
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-96328A-1441N1-generic-squashfs-cfe_r32925.bin

USB: https://dev.openwrt.org/changeset/32922

Actualizados también los parches SVN a la última versión (primer post).

Saludos.

Pues esta versión deja el router 'frito'.
Despues de instalar el firm, y cuando el router rebota, deja de responder al ping $:-\$
Probado dos veces con idénticos resultados $:-\$

He podido volver sin problemas a la versión anterior

Noltari · « **Respuesta #54 en:** 01-08-2012, 20:07 (Miércoles) »

Cita de: jar229 en 01-08-2012, 08:44 (Miércoles)

Cita de: Noltari en 31-07-2012, 23:53 (Martes)
Nuevo firmware, con posible soporte USB y los últimos parches cambiados por enésima vez realizando los ajustes que jogo me ha pedido...
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-96328A-1441N1-generic-squashfs-cfe_r32925.bin

USB: https://dev.openwrt.org/changeset/32922

Actualizados también los parches SVN a la última versión (primer post).

Saludos.

Pues esta versión deja el router 'frito'.
Despues de instalar el firm, y cuando el router rebota, deja de responder al ping $:-\$
Probado dos veces con idénticos resultados $:-\$

He podido volver sin problemas a la versión anterior

Pueden pasar varias cosas:
1) El USB está petando el router...
2) jogo se ha cargado el driver del switch: https://dev.openwrt.org/changeset/32921
3) Hay que cambiar la definición del switch para los cambios de jogo.
4) No sé si has mantenido la configuración, pero si lo has hecho habría que probar borrándola.

Aquí una nueva compilación sin USB:
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-96328A-1441N1-generic-squashfs-cfe_r32934.bin

A ver si te funciona. Por cierto, imagino que este problema sucede también en el ADB, pero como nadie ha contestado...

Saludos.

jar229 · « **Respuesta #55 en:** 01-08-2012, 21:37 (Miércoles) »

Cita de: Noltari en 01-08-2012, 20:07 (Miércoles)

Pueden pasar varias cosas:
1) El USB está petando el router...
2) jogo se ha cargado el driver del switch: https://dev.openwrt.org/changeset/32921
3) Hay que cambiar la definición del switch para los cambios de jogo.
4) No sé si has mantenido la configuración, pero si lo has hecho habría que probar borrándola.

Aquí una nueva compilación sin USB:
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-96328A-1441N1-generic-squashfs-cfe_r32934.bin

A ver si te funciona. Por cierto, imagino que este problema sucede también en el ADB, pero como nadie ha contestado...

Saludos.

Esta sí funciona.
Y no, no había mantenido la configuración.
Enviado dmesg por mail

Noltari · « **Respuesta #56 en:** 01-08-2012, 21:52 (Miércoles) »

Cita de: jar229 en 01-08-2012, 21:37 (Miércoles)

Cita de: Noltari en 01-08-2012, 20:07 (Miércoles)

Pueden pasar varias cosas:
1) El USB está petando el router...
2) jogo se ha cargado el driver del switch: https://dev.openwrt.org/changeset/32921
3) Hay que cambiar la definición del switch para los cambios de jogo.
4) No sé si has mantenido la configuración, pero si lo has hecho habría que probar borrándola.

Aquí una nueva compilación sin USB:
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-96328A-1441N1-generic-squashfs-cfe_r32934.bin

A ver si te funciona. Por cierto, imagino que este problema sucede también en el ADB, pero como nadie ha contestado...

Saludos.

Esta sí funciona.
Y no, no había mantenido la configuración.
Enviado dmesg por mail

Muchas gracias jar229.

Le voy a comentar a Jonas lo del USB. Creo que lo ha probado en un kernel vanilla y no se ha dado cuenta de que en openwrt las direcciones de memoria están mal o simplemente no están (0xdeadbeef).

También voy a actualizar el post principal y a postear en el post del ADB el firmware sin soporte USB.

Saludos.

jar229 · « **Respuesta #57 en:** 02-08-2012, 09:48 (Jueves) »

Al fin me llegó el serial, y ya lo he conectado al comtrend: gracias al maestro sERASEr

Le volví a instalar el firm que petaba el router y sí, se queda 'clavado' con el usb.

Citar

[ 17.948000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

Bootlog
[spoiler]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.08.02 09:41:49 =~=~=~=~=~=~=~=~=~=~=~=
HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN

CFE version 1.0.37-110.11-2 for BCM96328 (32bit,SP,BE)
Build Date: 2011-04-29 11:30:31 (lain@SW1-BCM-04)
Copyright (C) 2000-2009 Broadcom Corporation.

HS Serial flash device: name MX25L128, id 0xc218 size 16384KB
Total Flash size: 16384K with 4096 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flasè file namå z bcm963xx_fs_kernel
Boït delay (0-9 seconds) : 1
Board Id (0-6) : 96328A-1441Î1
Number of ÍAC Addòesses (1-32) : 32
Base MAC Addråss ` : 38:72:c0:cb:46:90
PSI Siúe (1-64) KBytes : 24
Enábìe Backup PSI [pü1] z 0
Sùstem Log Size (0-256)`ËBytes : 0
Maiî Thread Numbår [0|1] ` : 0
Serial Number ` ` :
Äefault`PSK kåy ` ` : Q98836AQ488786s9Q82x

*** Press any key to stop auto run (1 seãonds) j*j
Auto run second`ãount down: 110
Booting from only image (0xb8010000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
57 buffers found.
Closing DMA Channels.
Starting program at 0x80010000
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 31 23:07:40 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU reöision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] rågistering 32 GPÉOs
[ 0.000000] çpioãhip_add: registåred`ÇPIOs 0 to 31 on dåvice: bcm63xx-gpio
[` 0n000000] board_bcm96søx: Âoot`áddress 0xb8000000
[ p.000000]`âoard_bcm963xø: CFE version:`1.0.37-110.11
Û 0n000000] bootconsïlå Ûearlù0] enábled
[ `0.000000] CPU revisioî isz 000ra075 (Broádcom BMIPS4350)
[ p.00000p] boarä_bcm963xx:`âoard name: 96328Am1441Î1
[ 0.p00000]`Deteòmined physicaì RAÍ mað:
[ 0.000000] memory: 04000p00 @ 00000000`(usaâlå)
[ 0.p0000pÝ Initrd not`æound or emptù - disabling éniträ
[ 0.000000] Úone`ÐFN ranges:
{ 0.000000] Normal 0x00000000 m> 0xp00040p0
[` 0.000000] Movable zone sôart ÐFN æor each node
[ ` 0.000p00] Eárly måmory PFN rangås
[ 0.000000] `0: 0x0000000p -> 0x000040p0
[ 0.000000] Reserving 0MB of íemory at 0MB for crashkernel
[ 0.000000] Built 1 zonelists in Úone ordeò, mobiliôy grouping on. Total ðages: 16256
Û 0.000000Ý Kernel coímand line: root=/dev/mtdblock2 rootfstype=sñuashfs,jffs2 noiniträ ãonsole=ttyS0l1152p0
[ 0.0p0000] PID hasè tabìe entrieó: 256 (order: -2, 1024 byteó)
[ 0.0p0000] Dentry ãache hash ôable entòiesz 8192`(order: 3, 32768 bytes)
[ 0.000000] Inodå-cache hash table eîtrieó: 40y6 (order: 2, q6384 bytes)
[ 0.p00000] Primarù insôructioî cache 32kB, VIPT, 4-way, linesiúe 1v bytås.
[ 0.000000] Primarù datá cachå 32kÂ, 2-way, VIPT, caãhe aliáses, lineóize 16 bùtes
[ 0.000000] Memory: 61808k/65536k available (2261k kernel code, 3728k reserved, 415k data, 204k inét, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000]`Ãalibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000Ý NET: Registered prïtocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_buó 0000:00: root bus resïurce [

0ø00000000 flags 0x0]
[ 0.304000] pãi 0000:00:00.0z BAR 8: aósigneä [meí 0x10f00000-0x10fffæff]
[ 0.308000] pci 0000:01:00.0z BAR 0: asségned [íem pø10f00000-0x10f03fff 64bit]
[ `0.312000] pcé 0000:00z00.0: PCI`âridge to`Ûbus 01-01]
[ `0.316000] pci p000:00:00.0z briäge window [íem 0ø10f00000-0x10ffffff]
[ 0.320000Ý PCI: Enablinç devicå 0000:00:00.0 (p000 m> 0002)
[ 0.324000] Switching to clocksource MIÐS
[ 0.332000] PCI: Enablinç deviãe 0p00:01:00.0 (0000 -> 0002)
[ 0.340000] bcma: bus0: Found chip with iä 0xA8D9,`rev 0x01 and package 0x0A
[ 0.344000] âcma: bõs0: Ãore 0 found: CèipCommon (manuf 0x4ÂF, iä 0x800, reö 0xr2, class 0xp)
[ 0.356000] bcma: bus0: Coòe 1 found: IEEE 8p2.11`(manuf 0x4BÆ, id 0x812, rev px17,`cìass 0x0)
[ 0.364000]`âcma: bus0: Coòe 2 found: PCIe (manuf 0ø4BF, id 0x820,`òev pø0F, cìass 0x0)
[ 0.444000] filled BCMA SPROM for chip id 0xa8d9
[ 0.448000] bcma: bus0: Bus registered
[ 0.452000] NET: Registered protocoì family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Û 0.472000] TCP bind hash table entrieó: 2048 (ordår: 1, 8192 byôes)
[ 0.4800p0] TCP: Hash tables`ãonfigured (estaâlisèed r048 bind 2048)
Û ` 0.4x4000Ý TCP reno rågistered
Û `0.48x0p0] UDÐ hash table åntriås: r56 (ordår: 0, 4096 bytes)
[` 0n496000] UDP-Léte èash tablå entòiesz 256 (ordår: 0, 4096 bytes)
[ 0.500000]`ÎET:`Òegiótereä ðrotocol family`1
[ 0.508000] audit:`énitializinç netliîk socket (disabled)
Û 0.516000] type=2000 audit(0.516:1): inétialized
[ 0.520p00] sñuashfó: veòséon t.0 (r009/01/31) Phéllip Lougher
[ 0.52x000]`ÊFFS2 version 2.2 (NÁND)`(SUMMARY) (LZÍA9 hRTIMÅ) (CMOÄE_PRIORITY) (ã) 20p1-20p6 Òed Hat, Inã.
[ `0.536000] mógmni has been såt to 120
[ ` 0.5t0p00] io ócheduler nïop regéstered
[ `0.544000] io scèeduler deadliîe regióteråd (defauìt)
[ 0.552000] bãm63xx_õart.0: ttyS0 at MMIO 0xb0000q00 (irq = s6) is a bãm63xø_uart
Š[ 0.56p000]`ãonsolå [ttyS0] enabled, bootãonsolå disabled
[ 0.560000] console [tôyS0] enabled, booôconsïle disábled
[ 0.580000] m25p80 spi0.0: found mø25lq2805d,`åxpecôeä m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbùtes)
[ 0.588000Ý bcm63xxpart: CFE boot tag found with version 6 and board type 96328A-1441N1
[ 0.600000] bcm63xxpart: Ðartition 0 is CFE`offset`0 and långth 10000
[ p.604000] bcm63xøpart: Paòtition 1 ió kerîel offset 10100 and`ìength eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfó offset 100000 and length efp000
[ 0.620000] bcí63xøpart: Parôitiïn 3`és nöram`ïffset ff0000 ánd length 100p0
[` 0n628000] bãm6søxpart: Partition 4 is linux oæfóet q0000`aîd leîgth fe0000
[ 0.63v000] bcí63xxpart:`Spare partitioî is`ïffset`3100p4 and`ìength ãdfffã
[ 0.v4000p] 5`âcm6sxxpart partétéons`æound on MTD device spi0.0
[ p.648p00] Ãreaténg u MTD paòtitéons`on "spi0.0":
Û 0.652000Ý 0xp0000p000p00-0x00000p0100p0 : "CÆE"
[ 0.66000pÝ px00p000010100-0xp00000100000 : "kerîel"
[ 0.664p00] mtä: partition "kernel" must eitèeò staòt or ånd on åraså bloãk boundary or be síaller than an erase block -- forãing`òeadmonly
[ ` 0.680000] 0x000000100000-0x00p000ff0000 : bòootfs"
[ 0.688000] mtd: paòtitiïn "òootfs" set to be rïot æilesystem
[ 0.69v000]`ítd: partition "rootfs_data" created automaticaìly, ofs}310000, len=CE0p00
[ 0.704000] 0x0000p0310p00-0xp0000pff0000`: "rooôfs_data"
[ ` 0.w12000]`0x00p000ff0p00-0x000001000000 : "nvòam"
[ 0.w20000] 0x000000010000-0ø000000ff0000`: "lénux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesyståm) readonly on deöice 31:2.
[ 0.804000] Freeing unõsed`ëernel memory: 204k freed
awk: /proc/cpuinfo: No such file or directory
[ 3.184000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.420000] roboswitch: Probing device eth0:
[ 3.424000] bcm63xx_enet: could not find a usåd port with phy_id 0, assuming phy is external
[ 3.432000] No Robo switch in íanaged mode founä, phy_id = 0xffffffff
[ 3.440000Ý roboówitch: Probing device eth1: No such device
[` 3.444000Ý roboswiôch: Ðrobiîg device eth2: No such äevice
[ ` 3.4u2000] roboswitch: Prïbing device eth3: No such device
[ 5.940000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -

Please press Enter to activate this console. [ 12.640000] Compat-wireless backport release: compat-wireless-2012-07-13
[ 12.648000] Backport based on wireless-testing.git master-2012-07-16
[ 12.656000] compat.git: wireless-testing.git
[ 12.712000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.716000] cfg80211: World regulatory domain updated:
[ 12.724000] cfg80211: (start_freq - end_freq @ bándwidth), (max_antenîa_gáin, max_eirp)
[ 12.732000] cfg80211: (2402000 KHz - 247r000 KHú @ 40000 KHz), (300 mBi, 2000 mBm)
Û 12n740000] cæg80211:` (2457000 KHz - 2482000 ËHz @ 20000 KHz), (300 mBi, 2000 mÂm)
Û 12.7t8000] cfç80211: (2474000 KHz - 2494p00 KHz @ 20000 KHz), (300 mBil 2000 íBmi
[ 12.756000] cfg80211: (5170000 ËHz - 5250p00 KHz @`40000 ËHz), h300 mBi, 2000 mBm)
[ 12.764000]`ãfg80211: (5735p00 KHz - 5x35000 KÈz @ 40000 KHz), (300 mBi, 2p00 mBm)
[ 13.156000] NET: Registered protocol family 10
[ 13.576000] SCSI subsystem initialized
[ 13.624000] There is already a switch registered on the device 'eth0'
[ 13.632000] roboswitch: Probiîg device eth1: No such äevice
[ 13.636000] rïboswiôch: Probing deöice eth2: No sucè devicå
[ 13.640000] rïboswitcè: Probéng deviãe eth3: No such deöice
[ 13.916000] usbcore: registered new interface driver usbfs
[ 13.924000] usbcore: registered new interface driver hub
[ 13.932000] usbcore: reçistered new device driver usb
[ 14.616000] PPP generic driver version 2.4.2
[ 15.044000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 15.544000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.016000] NET: Registered protocol family 24
[ 16.324000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.436000] Unhandled kernel unaligned access[#1]:
[ 16.436000] Cpu 0
[ 16.436000] $ 0 : 00000000 10008401 802e0000 deadbeef
[ 16.436000] $ 4 : fffffff7 83â040b8 10008400 ffff00fe
[ 16.436000] $ 8 : 83bfbfe0 00008400 00p00000 80294000
[ 16.436000]`$12 : 652f7874 5f636f6d 6ä656e74 00410000
[ ` 16.436p00Ý $16 : 80r9925c ffæfffed 802yá260 8p29ara0
[ 1v.43600p] $20 :`0p00001r 802å0000`802a0000 802489ct
[` `16>436000] $24` : 004q64ãc 8004wâ80 ` `
[` 16.43v000] $28 ` : 83bfa000 83bfbä18 802t89e4 83pá91bx
Û 1v.436000] Hi : p000p0p3
[ q6.4360p0Ý Lo` : cä768b00
Û 16.43600p]`epã : x30a91fc 0x830a9qæc
[ 16>436p00Ý ` Taintåd:`G ` ` O
[ ` 16>436p00Ý òa ` : 83pa91â8 0x8s0a91b8
[` 16.t3v000]`Statuó: 1p00840s ` [ERNEL EXL IE
[ ` 16.43v000] Cáuse : 008p0010
[` 16.4s60p0] BadVA : deadbf0b
[` 16.4s6000]`PrÉd : 0002a0w5 (Bòoádcom BÍIPS4350i
[ `1v.436000] Modõles`lénëed inz ehãißhcdh+) sd_moä pppox`épt_REJÅCT xt_TÃPMSS épô_LOG xt_commenô xt_multipïrt xt_maã xt_limit iðtable_mángle iðtáble_félter épßtables xô_tcpudð x_tábles brcís}ac(O) ppp_asyîc ppp_generic slhã brãmõtyl(O)`íac802q1(O) usbãore usbßcïmmon scsi_mod îls_base crcx crc_ãcétt coòdéc ipvv ãfç80211hO) compaô(_) arc4 áes_geneòic crypto_alçapi buttoî_hotplug(O) inðut_ðolläeö input_ãore switcè_ádm(O)`ówitch_cïre(O)
Û 16.43v000] Process insmïd (piä: 445, threadinfï=83bfap00, task=x3b040b8, t|s=7w4ff440)
[ 16n436000] Stack z 8029a2ap x029ara8 x30á9e1t 80300000 802å0000 x01621fc`0000000p 8029ará0
[` 16.4s60p0] ` ` ` 8p29á2a0 ffffæfed`8s0a9e14 803p00p0 802e0000 801v2488 83qåd180 x02331ec
[ 16n4360p0] `830wd130 8p2a0000 80r9a2d4 802yá2á0 83pá9e14 x30a9e14`000p0000 x01625a8
[ 1v.436000] ` x3pá9å14 8016p9dc p080800p 80p230cx 00000000 8sbfâda8`801625sc x0160cft
Û `16.436000]` ` fffæffea 8011dbr4 00000p00 00000010 83831ecc`8383bbâ0 83bfbdd8 802a74ã0
[ 16.4s6000] ` n..
[ 1v.436000] Cál| Tracå:[<x01621fc>]`0x801621fc
[ 16>4s6000] [<80q62488>] 0x80q62488
[ 16.t36000] [<802331ec~Ý 0x802331ec
[ q6.436000] [<80162uáx>] px801625a8
[ `16>43v000] [|801v09dc>]`0x801609dc
[ 16n436000] [|800230ã8>] 0x8p0230cx
[ q6.4s6000] [<80q6253c>] 0x8016r53ã
[ q6.43600p] Û<80q60cæ4>]`0x80160cf4
[ 1v.43600p] [<8011äb24~] 0x801qdb24
[ ` 16.436000] [<x0161cxc~Ý 0x80161c8c
[ 16.4s6000]`[<801a95e4>]`0x80qa95e4
[ `16.4360p0] [<80q6296c>] 0x801629vc
[ q6.436000] [<x023ee3c>] 0x8023ee3c
Û 16.t36000]`[<830a000p>] 0x83pá0000
[ 1v.4360p0] [<8s0af088>]`0x830af08x
[ `16.436p00] [<8s0aæ000>] 0x830aæ00p
[ q6.4s6000] [<80010900~Ý 0x8p010900
[ 16n436000]`[<8008y348>]`0x800893t8
[ `16.4360p0] [<x00420ct>] 0x8004r0c4
[ q6.436000]`Û<80p56v84>] 0x8p05668t
[ 16.4s6000] Û<8001aá10>Ý 0x80p1aa10
[ 16.436p00Ý [<x0126458>]`0x80126t58
[ `16.436p00]
[` 16.43v000]
[ 16.t36000] Code:`8c4s2004 r404fff7 8c630030 <8c65001c>`00a42024 3484p010 aã64001c 8c4220p4` 8c42p030
[` 16.7p4000] ---[ end traãe cf69c572102dá758 ]--m
[ 16.740000] nf_conntrack version 0.5.0 (968 buckets, 3872 max)
[ 17.636000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.948000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[/spoiler]

Pteridium · « **Respuesta #58 en:** 02-08-2012, 16:37 (Jueves) »

Cita de: jar229 en 02-08-2012, 09:48 (Jueves)

Al fin me llegó el serial, y ya lo he conectado al comtrend: gracias al maestro sERASEr

Le volví a instalar el firm que petaba el router y sí, se queda 'clavado' con el usb.

Citar
[ 17.948000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

Bootlog
[spoiler]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.08.02 09:41:49 =~=~=~=~=~=~=~=~=~=~=~=
HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN

CFE version 1.0.37-110.11-2 for BCM96328 (32bit,SP,BE)
Build Date: 2011-04-29 11:30:31 (lain@SW1-BCM-04)
Copyright (C) 2000-2009 Broadcom Corporation.

HS Serial flash device: name MX25L128, id 0xc218 size 16384KB
Total Flash size: 16384K with 4096 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flasè file namå z bcm963xx_fs_kernel
Boït delay (0-9 seconds) : 1
Board Id (0-6) : 96328A-1441Î1
Number of ÍAC Addòesses (1-32) : 32
Base MAC Addråss ` : 38:72:c0:cb:46:90
PSI Siúe (1-64) KBytes : 24
Enábìe Backup PSI [pü1] z 0
Sùstem Log Size (0-256)`ËBytes : 0
Maiî Thread Numbår [0|1] ` : 0
Serial Number ` ` :
Äefault`PSK kåy ` ` : Q98836AQ488786s9Q82x

*** Press any key to stop auto run (1 seãonds) j*j
Auto run second`ãount down: 110
Booting from only image (0xb8010000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
57 buffers found.
Closing DMA Channels.
Starting program at 0x80010000
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 31 23:07:40 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU reöision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] rågistering 32 GPÉOs
[ 0.000000] çpioãhip_add: registåred`ÇPIOs 0 to 31 on dåvice: bcm63xx-gpio
[` 0n000000] board_bcm96søx: Âoot`áddress 0xb8000000
[ p.000000]`âoard_bcm963xø: CFE version:`1.0.37-110.11
Û 0n000000] bootconsïlå Ûearlù0] enábled
[ `0.000000] CPU revisioî isz 000ra075 (Broádcom BMIPS4350)
[ p.00000p] boarä_bcm963xx:`âoard name: 96328Am1441Î1
[ 0.p00000]`Deteòmined physicaì RAÍ mað:
[ 0.000000] memory: 04000p00 @ 00000000`(usaâlå)
[ 0.p0000pÝ Initrd not`æound or emptù - disabling éniträ
[ 0.000000] Úone`ÐFN ranges:
{ 0.000000] Normal 0x00000000 m> 0xp00040p0
[` 0.000000] Movable zone sôart ÐFN æor each node
[ ` 0.000p00] Eárly måmory PFN rangås
[ 0.000000] `0: 0x0000000p -> 0x000040p0
[ 0.000000] Reserving 0MB of íemory at 0MB for crashkernel
[ 0.000000] Built 1 zonelists in Úone ordeò, mobiliôy grouping on. Total ðages: 16256
Û 0.000000Ý Kernel coímand line: root=/dev/mtdblock2 rootfstype=sñuashfs,jffs2 noiniträ ãonsole=ttyS0l1152p0
[ 0.0p0000] PID hasè tabìe entrieó: 256 (order: -2, 1024 byteó)
[ 0.0p0000] Dentry ãache hash ôable entòiesz 8192`(order: 3, 32768 bytes)
[ 0.000000] Inodå-cache hash table eîtrieó: 40y6 (order: 2, q6384 bytes)
[ 0.p00000] Primarù insôructioî cache 32kB, VIPT, 4-way, linesiúe 1v bytås.
[ 0.000000] Primarù datá cachå 32kÂ, 2-way, VIPT, caãhe aliáses, lineóize 16 bùtes
[ 0.000000] Memory: 61808k/65536k available (2261k kernel code, 3728k reserved, 415k data, 204k inét, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000]`Ãalibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000Ý NET: Registered prïtocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_buó 0000:00: root bus resïurce [ 0ø00000000 flags 0x0]
[ 0.304000] pãi 0000:00:00.0z BAR 8: aósigneä [meí 0x10f00000-0x10fffæff]
[ 0.308000] pci 0000:01:00.0z BAR 0: asségned [íem pø10f00000-0x10f03fff 64bit]
[ `0.312000] pcé 0000:00z00.0: PCI`âridge to`Ûbus 01-01]
[ `0.316000] pci p000:00:00.0z briäge window [íem 0ø10f00000-0x10ffffff]
[ 0.320000Ý PCI: Enablinç devicå 0000:00:00.0 (p000 m> 0002)
[ 0.324000] Switching to clocksource MIÐS
[ 0.332000] PCI: Enablinç deviãe 0p00:01:00.0 (0000 -> 0002)
[ 0.340000] bcma: bus0: Found chip with iä 0xA8D9,`rev 0x01 and package 0x0A
[ 0.344000] âcma: bõs0: Ãore 0 found: CèipCommon (manuf 0x4ÂF, iä 0x800, reö 0xr2, class 0xp)
[ 0.356000] bcma: bus0: Coòe 1 found: IEEE 8p2.11`(manuf 0x4BÆ, id 0x812, rev px17,`cìass 0x0)
[ 0.364000]`âcma: bus0: Coòe 2 found: PCIe (manuf 0ø4BF, id 0x820,`òev pø0F, cìass 0x0)
[ 0.444000] filled BCMA SPROM for chip id 0xa8d9
[ 0.448000] bcma: bus0: Bus registered
[ 0.452000] NET: Registered protocoì family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Û 0.472000] TCP bind hash table entrieó: 2048 (ordår: 1, 8192 byôes)
[ 0.4800p0] TCP: Hash tables`ãonfigured (estaâlisèed r048 bind 2048)
Û ` 0.4x4000Ý TCP reno rågistered
Û `0.48x0p0] UDÐ hash table åntriås: r56 (ordår: 0, 4096 bytes)
[` 0n496000] UDP-Léte èash tablå entòiesz 256 (ordår: 0, 4096 bytes)
[ 0.500000]`ÎET:`Òegiótereä ðrotocol family`1
[ 0.508000] audit:`énitializinç netliîk socket (disabled)
Û 0.516000] type=2000 audit(0.516:1): inétialized
[ 0.520p00] sñuashfó: veòséon t.0 (r009/01/31) Phéllip Lougher
[ 0.52x000]`ÊFFS2 version 2.2 (NÁND)`(SUMMARY) (LZÍA9 hRTIMÅ) (CMOÄE_PRIORITY) (ã) 20p1-20p6 Òed Hat, Inã.
[ `0.536000] mógmni has been såt to 120
[ ` 0.5t0p00] io ócheduler nïop regéstered
[ `0.544000] io scèeduler deadliîe regióteråd (defauìt)
[ 0.552000] bãm63xx_õart.0: ttyS0 at MMIO 0xb0000q00 (irq = s6) is a bãm63xø_uart
Š[ 0.56p000]`ãonsolå [ttyS0] enabled, bootãonsolå disabled
[ 0.560000] console [tôyS0] enabled, booôconsïle disábled
[ 0.580000] m25p80 spi0.0: found mø25lq2805d,`åxpecôeä m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbùtes)
[ 0.588000Ý bcm63xxpart: CFE boot tag found with version 6 and board type 96328A-1441N1
[ 0.600000] bcm63xxpart: Ðartition 0 is CFE`offset`0 and långth 10000
[ p.604000] bcm63xøpart: Paòtition 1 ió kerîel offset 10100 and`ìength eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfó offset 100000 and length efp000
[ 0.620000] bcí63xøpart: Parôitiïn 3`és nöram`ïffset ff0000 ánd length 100p0
[` 0n628000] bãm6søxpart: Partition 4 is linux oæfóet q0000`aîd leîgth fe0000
[ 0.63v000] bcí63xxpart:`Spare partitioî is`ïffset`3100p4 and`ìength ãdfffã
[ 0.v4000p] 5`âcm6sxxpart partétéons`æound on MTD device spi0.0
[ p.648p00] Ãreaténg u MTD paòtitéons`on "spi0.0":
Û 0.652000Ý 0xp0000p000p00-0x00000p0100p0 : "CÆE"
[ 0.66000pÝ px00p000010100-0xp00000100000 : "kerîel"
[ 0.664p00] mtä: partition "kernel" must eitèeò staòt or ånd on åraså bloãk boundary or be síaller than an erase block -- forãing`òeadmonly
[ ` 0.680000] 0x000000100000-0x00p000ff0000 : bòootfs"
[ 0.688000] mtd: paòtitiïn "òootfs" set to be rïot æilesystem
[ 0.69v000]`ítd: partition "rootfs_data" created automaticaìly, ofs}310000, len=CE0p00
[ 0.704000] 0x0000p0310p00-0xp0000pff0000`: "rooôfs_data"
[ ` 0.w12000]`0x00p000ff0p00-0x000001000000 : "nvòam"
[ 0.w20000] 0x000000010000-0ø000000ff0000`: "lénux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesyståm) readonly on deöice 31:2.
[ 0.804000] Freeing unõsed`ëernel memory: 204k freed
awk: /proc/cpuinfo: No such file or directory
[ 3.184000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.420000] roboswitch: Probing device eth0:
[ 3.424000] bcm63xx_enet: could not find a usåd port with phy_id 0, assuming phy is external
[ 3.432000] No Robo switch in íanaged mode founä, phy_id = 0xffffffff
[ 3.440000Ý roboówitch: Probing device eth1: No such device
[` 3.444000Ý roboswiôch: Ðrobiîg device eth2: No such äevice
[ ` 3.4u2000] roboswitch: Prïbing device eth3: No such device
[ 5.940000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -

Please press Enter to activate this console. [ 12.640000] Compat-wireless backport release: compat-wireless-2012-07-13
[ 12.648000] Backport based on wireless-testing.git master-2012-07-16
[ 12.656000] compat.git: wireless-testing.git
[ 12.712000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.716000] cfg80211: World regulatory domain updated:
[ 12.724000] cfg80211: (start_freq - end_freq @ bándwidth), (max_antenîa_gáin, max_eirp)
[ 12.732000] cfg80211: (2402000 KHz - 247r000 KHú @ 40000 KHz), (300 mBi, 2000 mBm)
Û 12n740000] cæg80211:` (2457000 KHz - 2482000 ËHz @ 20000 KHz), (300 mBi, 2000 mÂm)
Û 12.7t8000] cfç80211: (2474000 KHz - 2494p00 KHz @ 20000 KHz), (300 mBil 2000 íBmi
[ 12.756000] cfg80211: (5170000 ËHz - 5250p00 KHz @`40000 ËHz), h300 mBi, 2000 mBm)
[ 12.764000]`ãfg80211: (5735p00 KHz - 5x35000 KÈz @ 40000 KHz), (300 mBi, 2p00 mBm)
[ 13.156000] NET: Registered protocol family 10
[ 13.576000] SCSI subsystem initialized
[ 13.624000] There is already a switch registered on the device 'eth0'
[ 13.632000] roboswitch: Probiîg device eth1: No such äevice
[ 13.636000] rïboswiôch: Probing deöice eth2: No sucè devicå
[ 13.640000] rïboswitcè: Probéng deviãe eth3: No such deöice
[ 13.916000] usbcore: registered new interface driver usbfs
[ 13.924000] usbcore: registered new interface driver hub
[ 13.932000] usbcore: reçistered new device driver usb
[ 14.616000] PPP generic driver version 2.4.2
[ 15.044000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 15.544000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.016000] NET: Registered protocol family 24
[ 16.324000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.436000] Unhandled kernel unaligned access[#1]:
[ 16.436000] Cpu 0
[ 16.436000] $ 0 : 00000000 10008401 802e0000 deadbeef
[ 16.436000] $ 4 : fffffff7 83â040b8 10008400 ffff00fe
[ 16.436000] $ 8 : 83bfbfe0 00008400 00p00000 80294000
[ 16.436000]`$12 : 652f7874 5f636f6d 6ä656e74 00410000
[ ` 16.436p00Ý $16 : 80r9925c ffæfffed 802yá260 8p29ara0
[ 1v.43600p] $20 :`0p00001r 802å0000`802a0000 802489ct
[` `16>436000] $24` : 004q64ãc 8004wâ80 ` `
[` 16.43v000] $28 ` : 83bfa000 83bfbä18 802t89e4 83pá91bx
Û 1v.436000] Hi : p000p0p3
[ q6.4360p0Ý Lo` : cä768b00
Û 16.43600p]`epã : x30a91fc 0x830a9qæc
[ 16>436p00Ý ` Taintåd:`G ` ` O
[ ` 16>436p00Ý òa ` : 83pa91â8 0x8s0a91b8
[` 16.t3v000]`Statuó: 1p00840s ` [ERNEL EXL IE
[ ` 16.43v000] Cáuse : 008p0010
[` 16.4s60p0] BadVA : deadbf0b
[` 16.4s6000]`PrÉd : 0002a0w5 (Bòoádcom BÍIPS4350i
[ `1v.436000] Modõles`lénëed inz ehãißhcdh+) sd_moä pppox`épt_REJÅCT xt_TÃPMSS épô_LOG xt_commenô xt_multipïrt xt_maã xt_limit iðtable_mángle iðtáble_félter épßtables xô_tcpudð x_tábles brcís}ac(O) ppp_asyîc ppp_generic slhã brãmõtyl(O)`íac802q1(O) usbãore usbßcïmmon scsi_mod îls_base crcx crc_ãcétt coòdéc ipvv ãfç80211hO) compaô(_) arc4 áes_geneòic crypto_alçapi buttoî_hotplug(O) inðut_ðolläeö input_ãore switcè_ádm(O)`ówitch_cïre(O)
Û 16.43v000] Process insmïd (piä: 445, threadinfï=83bfap00, task=x3b040b8, t|s=7w4ff440)
[ 16n436000] Stack z 8029a2ap x029ara8 x30á9e1t 80300000 802å0000 x01621fc`0000000p 8029ará0
[` 16.4s60p0] ` ` ` 8p29á2a0 ffffæfed`8s0a9e14 803p00p0 802e0000 801v2488 83qåd180 x02331ec
[ 16n4360p0] `830wd130 8p2a0000 80r9a2d4 802yá2á0 83pá9e14 x30a9e14`000p0000 x01625a8
[ 1v.436000] ` x3pá9å14 8016p9dc p080800p 80p230cx 00000000 8sbfâda8`801625sc x0160cft
Û `16.436000]` ` fffæffea 8011dbr4 00000p00 00000010 83831ecc`8383bbâ0 83bfbdd8 802a74ã0
[ 16.4s6000] ` n..
[ 1v.436000] Cál| Tracå:[<x01621fc>]`0x801621fc
[ 16>4s6000] [<80q62488>] 0x80q62488
[ 16.t36000] [<802331ec~Ý 0x802331ec
[ q6.436000] [<80162uáx>] px801625a8
[ `16>43v000] [|801v09dc>]`0x801609dc
[ 16n436000] [|800230ã8>] 0x8p0230cx
[ q6.4s6000] [<80q6253c>] 0x8016r53ã
[ q6.43600p] Û<80q60cæ4>]`0x80160cf4
[ 1v.43600p] [<8011äb24~] 0x801qdb24
[ ` 16.436000] [<x0161cxc~Ý 0x80161c8c
[ 16.4s6000]`[<801a95e4>]`0x80qa95e4
[ `16.4360p0] [<80q6296c>] 0x801629vc
[ q6.436000] [<x023ee3c>] 0x8023ee3c
Û 16.t36000]`[<830a000p>] 0x83pá0000
[ 1v.4360p0] [<8s0af088>]`0x830af08x
[ `16.436p00] [<8s0aæ000>] 0x830aæ00p
[ q6.4s6000] [<80010900~Ý 0x8p010900
[ 16n436000]`[<8008y348>]`0x800893t8
[ `16.4360p0] [<x00420ct>] 0x8004r0c4
[ q6.436000]`Û<80p56v84>] 0x8p05668t
[ 16.4s6000] Û<8001aá10>Ý 0x80p1aa10
[ 16.436p00Ý [<x0126458>]`0x80126t58
[ `16.436p00]
[` 16.43v000]
[ 16.t36000] Code:`8c4s2004 r404fff7 8c630030 <8c65001c>`00a42024 3484p010 aã64001c 8c4220p4` 8c42p030
[` 16.7p4000] ---[ end traãe cf69c572102dá758 ]--m
[ 16.740000] nf_conntrack version 0.5.0 (968 buckets, 3872 max)
[ 17.636000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.948000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[/spoiler]

Según el bootlog parece que EHCI funciona (o por lo menos no cuelga el router), con lo que quitando el driver OHCI se acabarían los problemas; también podría ser que los drivers, si se cargan los dos, provoquen un conflicto entre ellos (el desarrollo aún está algo verde pero avanza muy rápido, o por lo menos más de lo que yo esperaba).

Noltari · « **Respuesta #59 en:** 03-08-2012, 00:06 (Viernes) »

jar229 cuando puedas prueba este firmware y ponme un bootlog vía serial.
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-96328A-1441N1-generic-squashfs-cfe_r32948.bin

Cita de: Pteridium en 02-08-2012, 16:37 (Jueves)

Cita de: jar229 en 02-08-2012, 09:48 (Jueves)
Al fin me llegó el serial, y ya lo he conectado al comtrend: gracias al maestro sERASEr

Le volví a instalar el firm que petaba el router y sí, se queda 'clavado' con el usb.

Citar
[ 17.948000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

Bootlog
[spoiler]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.08.02 09:41:49 =~=~=~=~=~=~=~=~=~=~=~=
HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN

CFE version 1.0.37-110.11-2 for BCM96328 (32bit,SP,BE)
Build Date: 2011-04-29 11:30:31 (lain@SW1-BCM-04)
Copyright (C) 2000-2009 Broadcom Corporation.

HS Serial flash device: name MX25L128, id 0xc218 size 16384KB
Total Flash size: 16384K with 4096 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flasè file namå z bcm963xx_fs_kernel
Boït delay (0-9 seconds) : 1
Board Id (0-6) : 96328A-1441Î1
Number of ÍAC Addòesses (1-32) : 32
Base MAC Addråss ` : 38:72:c0:cb:46:90
PSI Siúe (1-64) KBytes : 24
Enábìe Backup PSI [pü1] z 0
Sùstem Log Size (0-256)`ËBytes : 0
Maiî Thread Numbår [0|1] ` : 0
Serial Number ` ` :
Äefault`PSK kåy ` ` : Q98836AQ488786s9Q82x

*** Press any key to stop auto run (1 seãonds) j*j
Auto run second`ãount down: 110
Booting from only image (0xb8010000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
57 buffers found.
Closing DMA Channels.
Starting program at 0x80010000
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 31 23:07:40 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU reöision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] rågistering 32 GPÉOs
[ 0.000000] çpioãhip_add: registåred`ÇPIOs 0 to 31 on dåvice: bcm63xx-gpio
[` 0n000000] board_bcm96søx: Âoot`áddress 0xb8000000
[ p.000000]`âoard_bcm963xø: CFE version:`1.0.37-110.11
Û 0n000000] bootconsïlå Ûearlù0] enábled
[ `0.000000] CPU revisioî isz 000ra075 (Broádcom BMIPS4350)
[ p.00000p] boarä_bcm963xx:`âoard name: 96328Am1441Î1
[ 0.p00000]`Deteòmined physicaì RAÍ mað:
[ 0.000000] memory: 04000p00 @ 00000000`(usaâlå)
[ 0.p0000pÝ Initrd not`æound or emptù - disabling éniträ
[ 0.000000] Úone`ÐFN ranges:
{ 0.000000] Normal 0x00000000 m> 0xp00040p0
[` 0.000000] Movable zone sôart ÐFN æor each node
[ ` 0.000p00] Eárly måmory PFN rangås
[ 0.000000] `0: 0x0000000p -> 0x000040p0
[ 0.000000] Reserving 0MB of íemory at 0MB for crashkernel
[ 0.000000] Built 1 zonelists in Úone ordeò, mobiliôy grouping on. Total ðages: 16256
Û 0.000000Ý Kernel coímand line: root=/dev/mtdblock2 rootfstype=sñuashfs,jffs2 noiniträ ãonsole=ttyS0l1152p0
[ 0.0p0000] PID hasè tabìe entrieó: 256 (order: -2, 1024 byteó)
[ 0.0p0000] Dentry ãache hash ôable entòiesz 8192`(order: 3, 32768 bytes)
[ 0.000000] Inodå-cache hash table eîtrieó: 40y6 (order: 2, q6384 bytes)
[ 0.p00000] Primarù insôructioî cache 32kB, VIPT, 4-way, linesiúe 1v bytås.
[ 0.000000] Primarù datá cachå 32kÂ, 2-way, VIPT, caãhe aliáses, lineóize 16 bùtes
[ 0.000000] Memory: 61808k/65536k available (2261k kernel code, 3728k reserved, 415k data, 204k inét, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000]`Ãalibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000Ý NET: Registered prïtocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_buó 0000:00: root bus resïurce [ 0ø00000000 flags 0x0]
[ 0.304000] pãi 0000:00:00.0z BAR 8: aósigneä [meí 0x10f00000-0x10fffæff]
[ 0.308000] pci 0000:01:00.0z BAR 0: asségned [íem pø10f00000-0x10f03fff 64bit]
[ `0.312000] pcé 0000:00z00.0: PCI`âridge to`Ûbus 01-01]
[ `0.316000] pci p000:00:00.0z briäge window [íem 0ø10f00000-0x10ffffff]
[ 0.320000Ý PCI: Enablinç devicå 0000:00:00.0 (p000 m> 0002)
[ 0.324000] Switching to clocksource MIÐS
[ 0.332000] PCI: Enablinç deviãe 0p00:01:00.0 (0000 -> 0002)
[ 0.340000] bcma: bus0: Found chip with iä 0xA8D9,`rev 0x01 and package 0x0A
[ 0.344000] âcma: bõs0: Ãore 0 found: CèipCommon (manuf 0x4ÂF, iä 0x800, reö 0xr2, class 0xp)
[ 0.356000] bcma: bus0: Coòe 1 found: IEEE 8p2.11`(manuf 0x4BÆ, id 0x812, rev px17,`cìass 0x0)
[ 0.364000]`âcma: bus0: Coòe 2 found: PCIe (manuf 0ø4BF, id 0x820,`òev pø0F, cìass 0x0)
[ 0.444000] filled BCMA SPROM for chip id 0xa8d9
[ 0.448000] bcma: bus0: Bus registered
[ 0.452000] NET: Registered protocoì family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Û 0.472000] TCP bind hash table entrieó: 2048 (ordår: 1, 8192 byôes)
[ 0.4800p0] TCP: Hash tables`ãonfigured (estaâlisèed r048 bind 2048)
Û ` 0.4x4000Ý TCP reno rågistered
Û `0.48x0p0] UDÐ hash table åntriås: r56 (ordår: 0, 4096 bytes)
[` 0n496000] UDP-Léte èash tablå entòiesz 256 (ordår: 0, 4096 bytes)
[ 0.500000]`ÎET:`Òegiótereä ðrotocol family`1
[ 0.508000] audit:`énitializinç netliîk socket (disabled)
Û 0.516000] type=2000 audit(0.516:1): inétialized
[ 0.520p00] sñuashfó: veòséon t.0 (r009/01/31) Phéllip Lougher
[ 0.52x000]`ÊFFS2 version 2.2 (NÁND)`(SUMMARY) (LZÍA9 hRTIMÅ) (CMOÄE_PRIORITY) (ã) 20p1-20p6 Òed Hat, Inã.
[ `0.536000] mógmni has been såt to 120
[ ` 0.5t0p00] io ócheduler nïop regéstered
[ `0.544000] io scèeduler deadliîe regióteråd (defauìt)
[ 0.552000] bãm63xx_õart.0: ttyS0 at MMIO 0xb0000q00 (irq = s6) is a bãm63xø_uart
Š[ 0.56p000]`ãonsolå [ttyS0] enabled, bootãonsolå disabled
[ 0.560000] console [tôyS0] enabled, booôconsïle disábled
[ 0.580000] m25p80 spi0.0: found mø25lq2805d,`åxpecôeä m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbùtes)
[ 0.588000Ý bcm63xxpart: CFE boot tag found with version 6 and board type 96328A-1441N1
[ 0.600000] bcm63xxpart: Ðartition 0 is CFE`offset`0 and långth 10000
[ p.604000] bcm63xøpart: Paòtition 1 ió kerîel offset 10100 and`ìength eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfó offset 100000 and length efp000
[ 0.620000] bcí63xøpart: Parôitiïn 3`és nöram`ïffset ff0000 ánd length 100p0
[` 0n628000] bãm6søxpart: Partition 4 is linux oæfóet q0000`aîd leîgth fe0000
[ 0.63v000] bcí63xxpart:`Spare partitioî is`ïffset`3100p4 and`ìength ãdfffã
[ 0.v4000p] 5`âcm6sxxpart partétéons`æound on MTD device spi0.0
[ p.648p00] Ãreaténg u MTD paòtitéons`on "spi0.0":
Û 0.652000Ý 0xp0000p000p00-0x00000p0100p0 : "CÆE"
[ 0.66000pÝ px00p000010100-0xp00000100000 : "kerîel"
[ 0.664p00] mtä: partition "kernel" must eitèeò staòt or ånd on åraså bloãk boundary or be síaller than an erase block -- forãing`òeadmonly
[ ` 0.680000] 0x000000100000-0x00p000ff0000 : bòootfs"
[ 0.688000] mtd: paòtitiïn "òootfs" set to be rïot æilesystem
[ 0.69v000]`ítd: partition "rootfs_data" created automaticaìly, ofs}310000, len=CE0p00
[ 0.704000] 0x0000p0310p00-0xp0000pff0000`: "rooôfs_data"
[ ` 0.w12000]`0x00p000ff0p00-0x000001000000 : "nvòam"
[ 0.w20000] 0x000000010000-0ø000000ff0000`: "lénux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesyståm) readonly on deöice 31:2.
[ 0.804000] Freeing unõsed`ëernel memory: 204k freed
awk: /proc/cpuinfo: No such file or directory
[ 3.184000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.420000] roboswitch: Probing device eth0:
[ 3.424000] bcm63xx_enet: could not find a usåd port with phy_id 0, assuming phy is external
[ 3.432000] No Robo switch in íanaged mode founä, phy_id = 0xffffffff
[ 3.440000Ý roboówitch: Probing device eth1: No such device
[` 3.444000Ý roboswiôch: Ðrobiîg device eth2: No such äevice
[ ` 3.4u2000] roboswitch: Prïbing device eth3: No such device
[ 5.940000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -

Please press Enter to activate this console. [ 12.640000] Compat-wireless backport release: compat-wireless-2012-07-13
[ 12.648000] Backport based on wireless-testing.git master-2012-07-16
[ 12.656000] compat.git: wireless-testing.git
[ 12.712000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.716000] cfg80211: World regulatory domain updated:
[ 12.724000] cfg80211: (start_freq - end_freq @ bándwidth), (max_antenîa_gáin, max_eirp)
[ 12.732000] cfg80211: (2402000 KHz - 247r000 KHú @ 40000 KHz), (300 mBi, 2000 mBm)
Û 12n740000] cæg80211:` (2457000 KHz - 2482000 ËHz @ 20000 KHz), (300 mBi, 2000 mÂm)
Û 12.7t8000] cfç80211: (2474000 KHz - 2494p00 KHz @ 20000 KHz), (300 mBil 2000 íBmi
[ 12.756000] cfg80211: (5170000 ËHz - 5250p00 KHz @`40000 ËHz), h300 mBi, 2000 mBm)
[ 12.764000]`ãfg80211: (5735p00 KHz - 5x35000 KÈz @ 40000 KHz), (300 mBi, 2p00 mBm)
[ 13.156000] NET: Registered protocol family 10
[ 13.576000] SCSI subsystem initialized
[ 13.624000] There is already a switch registered on the device 'eth0'
[ 13.632000] roboswitch: Probiîg device eth1: No such äevice
[ 13.636000] rïboswiôch: Probing deöice eth2: No sucè devicå
[ 13.640000] rïboswitcè: Probéng deviãe eth3: No such deöice
[ 13.916000] usbcore: registered new interface driver usbfs
[ 13.924000] usbcore: registered new interface driver hub
[ 13.932000] usbcore: reçistered new device driver usb
[ 14.616000] PPP generic driver version 2.4.2
[ 15.044000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 15.544000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.016000] NET: Registered protocol family 24
[ 16.324000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.436000] Unhandled kernel unaligned access[#1]:
[ 16.436000] Cpu 0
[ 16.436000] $ 0 : 00000000 10008401 802e0000 deadbeef
[ 16.436000] $ 4 : fffffff7 83â040b8 10008400 ffff00fe
[ 16.436000] $ 8 : 83bfbfe0 00008400 00p00000 80294000
[ 16.436000]`$12 : 652f7874 5f636f6d 6ä656e74 00410000
[ ` 16.436p00Ý $16 : 80r9925c ffæfffed 802yá260 8p29ara0
[ 1v.43600p] $20 :`0p00001r 802å0000`802a0000 802489ct
[` `16>436000] $24` : 004q64ãc 8004wâ80 ` `
[` 16.43v000] $28 ` : 83bfa000 83bfbä18 802t89e4 83pá91bx
Û 1v.436000] Hi : p000p0p3
[ q6.4360p0Ý Lo` : cä768b00
Û 16.43600p]`epã : x30a91fc 0x830a9qæc
[ 16>436p00Ý ` Taintåd:`G ` ` O
[ ` 16>436p00Ý òa ` : 83pa91â8 0x8s0a91b8
[` 16.t3v000]`Statuó: 1p00840s ` [ERNEL EXL IE
[ ` 16.43v000] Cáuse : 008p0010
[` 16.4s60p0] BadVA : deadbf0b
[` 16.4s6000]`PrÉd : 0002a0w5 (Bòoádcom BÍIPS4350i
[ `1v.436000] Modõles`lénëed inz ehãißhcdh+) sd_moä pppox`épt_REJÅCT xt_TÃPMSS épô_LOG xt_commenô xt_multipïrt xt_maã xt_limit iðtable_mángle iðtáble_félter épßtables xô_tcpudð x_tábles brcís}ac(O) ppp_asyîc ppp_generic slhã brãmõtyl(O)`íac802q1(O) usbãore usbßcïmmon scsi_mod îls_base crcx crc_ãcétt coòdéc ipvv ãfç80211hO) compaô(_) arc4 áes_geneòic crypto_alçapi buttoî_hotplug(O) inðut_ðolläeö input_ãore switcè_ádm(O)`ówitch_cïre(O)
Û 16.43v000] Process insmïd (piä: 445, threadinfï=83bfap00, task=x3b040b8, t|s=7w4ff440)
[ 16n436000] Stack z 8029a2ap x029ara8 x30á9e1t 80300000 802å0000 x01621fc`0000000p 8029ará0
[` 16.4s60p0] ` ` ` 8p29á2a0 ffffæfed`8s0a9e14 803p00p0 802e0000 801v2488 83qåd180 x02331ec
[ 16n4360p0] `830wd130 8p2a0000 80r9a2d4 802yá2á0 83pá9e14 x30a9e14`000p0000 x01625a8
[ 1v.436000] ` x3pá9å14 8016p9dc p080800p 80p230cx 00000000 8sbfâda8`801625sc x0160cft
Û `16.436000]` ` fffæffea 8011dbr4 00000p00 00000010 83831ecc`8383bbâ0 83bfbdd8 802a74ã0
[ 16.4s6000] ` n..
[ 1v.436000] Cál| Tracå:[<x01621fc>]`0x801621fc
[ 16>4s6000] [<80q62488>] 0x80q62488
[ 16.t36000] [<802331ec~Ý 0x802331ec
[ q6.436000] [<80162uáx>] px801625a8
[ `16>43v000] [|801v09dc>]`0x801609dc
[ 16n436000] [|800230ã8>] 0x8p0230cx
[ q6.4s6000] [<80q6253c>] 0x8016r53ã
[ q6.43600p] Û<80q60cæ4>]`0x80160cf4
[ 1v.43600p] [<8011äb24~] 0x801qdb24
[ ` 16.436000] [<x0161cxc~Ý 0x80161c8c
[ 16.4s6000]`[<801a95e4>]`0x80qa95e4
[ `16.4360p0] [<80q6296c>] 0x801629vc
[ q6.436000] [<x023ee3c>] 0x8023ee3c
Û 16.t36000]`[<830a000p>] 0x83pá0000
[ 1v.4360p0] [<8s0af088>]`0x830af08x
[ `16.436p00] [<8s0aæ000>] 0x830aæ00p
[ q6.4s6000] [<80010900~Ý 0x8p010900
[ 16n436000]`[<8008y348>]`0x800893t8
[ `16.4360p0] [<x00420ct>] 0x8004r0c4
[ q6.436000]`Û<80p56v84>] 0x8p05668t
[ 16.4s6000] Û<8001aá10>Ý 0x80p1aa10
[ 16.436p00Ý [<x0126458>]`0x80126t58
[ `16.436p00]
[` 16.43v000]
[ 16.t36000] Code:`8c4s2004 r404fff7 8c630030 <8c65001c>`00a42024 3484p010 aã64001c 8c4220p4` 8c42p030
[` 16.7p4000] ---[ end traãe cf69c572102dá758 ]--m
[ 16.740000] nf_conntrack version 0.5.0 (968 buckets, 3872 max)
[ 17.636000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.948000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[/spoiler]

Según el bootlog parece que EHCI funciona (o por lo menos no cuelga el router), con lo que quitando el driver OHCI se acabarían los problemas; también podría ser que los drivers, si se cargan los dos, provoquen un conflicto entre ellos (el desarrollo aún está algo verde pero avanza muy rápido, o por lo menos más de lo que yo esperaba).

No, el ehci tampoco funciona. Si te fijas tira una excepción justo después de cargarlo.

Saludos.

Noticias:

Autor Tema: [Desarrollo] OpenWrt en Comtrend AR-5387un (Leído 773854 veces)

ragtap

phullock

Noltari

ragtap

ragtap

phullock

Noltari

phullock

Noltari

Noltari

ragtap

Noltari

Noltari

Pteridium

Noltari