Autor Tema: Wifislax 4.1 no me reconoce broadcom 43222  (Leído 6942 veces)

0 Usuarios y 1 Visitante están viendo este tema.

alvarotole

  • Visitante
Wifislax 4.1 no me reconoce broadcom 43222
« en: 05-08-2012, 11:22 (Domingo) »
Bueno tengo un problemilla, leyendo los post referentes a tarjetas broadcom, creí entender que en la version 4.1 estaban incluidos los drivers. Yo tengo una broadcom 43222 y cuando carga el wifislax 4.1 no me reconoce la tarjeta y mo me deja ponerla en modo monitor. No tengo ni idea de linux por lo que por mas que lo intento no encuentro utilidades dentro del wifislax para ver que es lo que esta mal. Si alguien puede echarme una mano estaría muy agradecido. El ordenador que utilizo es el toshiba a80 y la tarjeta no venia de serie.


« Última modificación: 05-08-2012, 12:43 (Domingo) por alvarotole »

Chumpy

  • Visitante
Re: Wifislax 4.1 no me reconoce la tarjeta wifi
« Respuesta #1 en: 05-08-2012, 12:35 (Domingo) »
Abre una consola y pon iwconfig y lspci (si es un tarjeta integrada en el ordenador) o lsusb (si es un adaptador conectado por USB) luego pega aquí las respuestas a ambos comandos.

De paso modifica el título cambiando "la tarjeta wifi" por "Broadcom 43222", el título es mucho más descriptivo de la segunda forma.
« Última modificación: 05-08-2012, 12:36 (Domingo) por Chumpy »

alvarotole

  • Visitante
Re: Wifislax 4.1 no me reconoce broadcom 43222
« Respuesta #2 en: 05-08-2012, 15:40 (Domingo) »
Muchas gracias por tu respuesta.

Creo que esto es lo que me pides:

wifislax ~ # iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wifislax ~ # lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 10)
06:02.0 Network controller: Broadcom Corporation Device 4350
06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller

Gracias de nuevo

alist3r

  • Visitante
Re: Wifislax 4.1 no me reconoce broadcom 43222
« Respuesta #3 en: 05-08-2012, 17:50 (Domingo) »
que yo sepa, las BCM4350 no van en el kernel que calza WS41, a no ser que el driver  broadcom-sta, que es ajeno al codigo oficial del kernel de linux, haya sido incluido manualmente y configurado en UDEV por agun miembro del equipo de desarrollo, cosa que desconozco debido a mi periodo de ausencia.

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 14453
Re: Wifislax 4.1 no me reconoce broadcom 43222
« Respuesta #4 en: 05-08-2012, 18:02 (Domingo) »
que yo sepa, las BCM4350 no van en el kernel que calza WS41, a no ser que el driver  broadcom-sta, que es ajeno al codigo oficial del kernel de linux, haya sido incluido manualmente y configurado en UDEV por agun miembro del equipo de desarrollo, cosa que desconozco debido a mi periodo de ausencia.

de lo que comentas no he hecho nada.

la tarjeta parece estar hay , por que sale en el lspci.

tal vez falte el firmware.


nada mas arrancar sin tocar ni conectar nada , lo primero abre una shell..y escribe

dmesg

y copianos el contenido.

te informo ademas de que estmos en desarrollo de wifislax 4.2 con un kernel un poco mas nuevo en su beta 7


alvarotole

  • Visitante
Re: Wifislax 4.1 no me reconoce broadcom 43222
« Respuesta #5 en: 05-08-2012, 21:19 (Domingo) »
Bueno esto es lo que me ha salido con el comando dmesg:

   0.093210] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.093215] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.093218] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.093222] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.093226] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.093230] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.093234] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.093238] PCI: root bus 00: using default resources
[    0.093299] PCI host bridge to bus 0000:00
[    0.093436] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.093575] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.093726] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[    0.093778] pci 0000:00:02.0: [8086:2592] type 0 class 0x000300
[    0.093789] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
[    0.093795] pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
[    0.093802] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    0.093809] pci 0000:00:02.0: reg 1c: [mem 0xb0000000-0xb003ffff]
[    0.093845] pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
[    0.093854] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
[    0.093947] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
[    0.094057] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.094096] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[    0.094150] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.094191] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[    0.094245] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.094287] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[    0.094340] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.094381] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
[    0.094435] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.094488] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[    0.094512] pci 0000:00:1d.7: reg 10: [mem 0xb0040000-0xb00403ff]
[    0.094612] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.094638] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.094728] pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401
[    0.094748] pci 0000:00:1e.2: reg 10: [io  0x1c00-0x1cff]
[    0.094760] pci 0000:00:1e.2: reg 14: [io  0x18c0-0x18ff]
[    0.094773] pci 0000:00:1e.2: reg 18: [mem 0xb0040800-0xb00409ff]
[    0.094785] pci 0000:00:1e.2: reg 1c: [mem 0xb0040400-0xb00404ff]
[    0.094846] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.094869] pci 0000:00:1e.3: [8086:266d] type 0 class 0x000703
[    0.094889] pci 0000:00:1e.3: reg 10: [io  0x2400-0x24ff]
[    0.094901] pci 0000:00:1e.3: reg 14: [io  0x2000-0x207f]
[    0.094980] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.095018] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[    0.095124] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.095133] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.095375] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.095545] pci 0000:00:1f.2: [8086:2653] type 0 class 0x000101
[    0.095567] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.095579] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.095591] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.095604] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.095616] pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
[    0.095668] pci 0000:00:1f.2: PME# supported from D3hot
[    0.095691] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
[    0.095762] pci 0000:00:1f.3: reg 20: [io  0x20a0-0x20bf]
[    0.095898] pci 0000:02:00.0: [11ab:4351] type 0 class 0x000200
[    0.095930] pci 0000:02:00.0: reg 10: [mem 0xb4000000-0xb4003fff 64bit]
[    0.095947] pci 0000:02:00.0: reg 18: [io  0x3000-0x30ff]
[    0.096098] pci 0000:02:00.0: supports D1 D2
[    0.096101] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.096125] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.096383] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.096524] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.096530] pci 0000:00:1c.0:   bridge window [mem 0xb4000000-0xb7ffffff]
[    0.096539] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[    0.096590] pci 0000:06:02.0: [14e4:4350] type 0 class 0x000280
[    0.096612] pci 0000:06:02.0: reg 10: [mem 0xb8000000-0xb8003fff]
[    0.096702] pci 0000:06:02.0: supports D1 D2
[    0.096705] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[    0.096734] pci 0000:06:04.0: [104c:8031] type 2 class 0x000607
[    0.096760] pci 0000:06:04.0: reg 10: [mem 0xb800a000-0xb800afff]
[    0.096801] pci 0000:06:04.0: supports D1 D2
[    0.096804] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.096834] pci 0000:06:04.2: [104c:8032] type 0 class 0x000c00
[    0.096860] pci 0000:06:04.2: reg 10: [mem 0xb800b000-0xb800b7ff]
[    0.096875] pci 0000:06:04.2: reg 14: [mem 0xb8004000-0xb8007fff]
[    0.096978] pci 0000:06:04.2: supports D1 D2
[    0.096981] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[    0.097053] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[    0.097200] pci 0000:00:1e.0:   bridge window [mem 0xb8000000-0xb80fffff]
[    0.097208] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.097212] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.097265] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[    0.097523] pci_bus 0000:00: on NUMA node 0
[    0.097530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.097708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.097795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.097898]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.097999]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.098238] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.103213] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.103775] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.104467] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.105057] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.105617] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.106393] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.107050] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.107729] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.108501] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.108746] vgaarb: loaded
[    0.108878] vgaarb: bridge control possible 0000:00:02.0
[    0.109227] SCSI subsystem initialized
[    0.109459] libata version 3.00 loaded.
[    0.109568] usbcore: registered new interface driver usbfs
[    0.109741] usbcore: registered new interface driver hub
[    0.109921] usbcore: registered new device driver usb
[    0.110117] PCI: Using ACPI for IRQ routing
[    0.120188] PCI: pci_cache_line_size set to 64 bytes
[    0.120269] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.120272] reserve RAM buffer: 000000003f6e0000 - 000000003fffffff
[    0.120656] hpet clockevent registered
[    0.120662] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.120808] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.120993] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.126006] Switching to clocksource hpet
[    0.126210] pnp: PnP ACPI init
[    0.126352] ACPI: bus type pnp registered
[    0.126868] pnp 00:00: [bus 00-ff]
[    0.126872] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.126875] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.126878] pnp 00:00: [io  0x0d00-0xffff window]
[    0.126881] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.126885] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.126888] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.126891] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.126894] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.126898] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.126901] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.126904] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.126907] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.126910] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.126914] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.126917] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.126920] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.126923] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.126927] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.126985] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.126985] pnp 00:01: [io  0xfe00-0xfe7f]
[    0.126985] pnp 00:01: [io  0xfe80-0xfeff]
[    0.126985] pnp 00:01: [io  0xff00-0xff7f]
[    0.126985] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.126985] pnp 00:01: [mem 0xf0000000-0xf0003fff]
[    0.126985] pnp 00:01: [mem 0xf0004000-0xf0004fff]
[    0.126985] pnp 00:01: [mem 0xf0005000-0xf0005fff]
[    0.126985] pnp 00:01: [mem 0xf0008000-0xf000bfff]
[    0.126985] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[    0.126985] system 00:01: [io  0xfe00-0xfe7f] has been reserved
[    0.127123] system 00:01: [io  0xfe80-0xfeff] has been reserved
[    0.127264] system 00:01: [io  0xff00-0xff7f] has been reserved
[    0.127403] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.127545] system 00:01: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.127686] system 00:01: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.127826] system 00:01: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.127968] system 00:01: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.128121] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.128262] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128497] pnp 00:02: [io  0x0000-0x001f]
[    0.128500] pnp 00:02: [io  0x0081-0x0091]
[    0.128503] pnp 00:02: [io  0x0093-0x009f]
[    0.128506] pnp 00:02: [io  0x00c0-0x00df]
[    0.128509] pnp 00:02: [dma 4]
[    0.128570] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.128583] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.128645] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.128660] pnp 00:04: [io  0x00f0]
[    0.128672] pnp 00:04: [irq 13]
[    0.128732] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.128763] pnp 00:05: [io  0x002e-0x002f]
[    0.128766] pnp 00:05: [io  0x0061]
[    0.128768] pnp 00:05: [io  0x0063]
[    0.128771] pnp 00:05: [io  0x0065]
[    0.128774] pnp 00:05: [io  0x0067]
[    0.128776] pnp 00:05: [io  0x0070]
[    0.128779] pnp 00:05: [io  0x0080]
[    0.128784] pnp 00:05: [io  0x0092]
[    0.128786] pnp 00:05: [io  0x00b2-0x00b3]
[    0.128789] pnp 00:05: [io  0x0800-0x080f]
[    0.128792] pnp 00:05: [io  0x1000-0x107f]
[    0.128795] pnp 00:05: [io  0x1180-0x11bf]
[    0.128798] pnp 00:05: [io  0x1640-0x164f]
[    0.128886] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.129038] system 00:05: [io  0x1000-0x107f] has been reserved
[    0.129177] system 00:05: [io  0x1180-0x11bf] has been reserved
[    0.129317] system 00:05: [io  0x1640-0x164f] has been reserved
[    0.129456] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129491] pnp 00:06: [io  0x0070-0x0077]
[    0.129556] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.150033] pnp 00:07: [io  0x0060]
[    0.150036] pnp 00:07: [io  0x0064]
[    0.150043] pnp 00:07: [irq 1]
[    0.150107] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.150124] pnp 00:08: [irq 12]
[    0.150187] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.150236] pnp: PnP ACPI: found 9 devices
[    0.150370] ACPI: ACPI bus type pnp unregistered
[    0.150509] PnPBIOS: Disabled by ACPI PNP
[    0.189235] PCI: max bus depth: 2 pci_try_num: 3
[    0.189271] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x4007ffff]
[    0.189416] pci 0000:00:1e.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[    0.189654] pci 0000:00:1e.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.189796] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.189937] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.190090] pci 0000:00:1c.0:   bridge window [mem 0xb4000000-0xb7ffffff]
[    0.190234] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[    0.190480] pci 0000:06:04.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[    0.190621] pci 0000:06:04.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[    0.190856] pci 0000:06:04.0: BAR 14: assigned [io  0x4000-0x40ff]
[    0.190997] pci 0000:06:04.0: BAR 13: assigned [io  0x4400-0x44ff]
[    0.191145] pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
[    0.191283] pci 0000:06:04.0:   bridge window [io  0x4400-0x44ff]
[    0.191427] pci 0000:06:04.0:   bridge window [io  0x4000-0x40ff]
[    0.191570] pci 0000:06:04.0:   bridge window [mem 0x44000000-0x47ffffff pref]
[    0.191808] pci 0000:06:04.0:   bridge window [mem 0x48000000-0x4bffffff]
[    0.191954] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[    0.192099] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.192242] pci 0000:00:1e.0:   bridge window [mem 0xb8000000-0xb80fffff]
[    0.192385] pci 0000:00:1e.0:   bridge window [mem 0x44000000-0x47ffffff pref]
[    0.192648] pci 0000:00:1e.0: setting latency timer to 64
[    0.192666] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.192669] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.192673] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.192676] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb7ffffff]
[    0.192680] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
[    0.192683] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.192686] pci_bus 0000:06: resource 1 [mem 0xb8000000-0xb80fffff]
[    0.192690] pci_bus 0000:06: resource 2 [mem 0x44000000-0x47ffffff pref]
[    0.192693] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.192696] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.192700] pci_bus 0000:07: resource 0 [io  0x4400-0x44ff]
[    0.192703] pci_bus 0000:07: resource 1 [io  0x4000-0x40ff]
[    0.192706] pci_bus 0000:07: resource 2 [mem 0x44000000-0x47ffffff pref]
[    0.192709] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff]
[    0.192737] NET: Registered protocol family 2
[    0.192928] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.193188] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.194330] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.195080] TCP: Hash tables configured (established 131072 bind 65536)
[    0.195223] TCP reno registered
[    0.195359] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.195519] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.195762] NET: Registered protocol family 1
[    0.195923] pci 0000:00:02.0: Boot video device
[    0.196153] PCI: CLS 32 bytes, default 64
[    0.196228] Trying to unpack rootfs image as initramfs...
[    0.197503] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    0.201526] Freeing initrd memory: 1852k freed
[    0.203314] Simple Boot Flag at 0x36 set to 0x1
[    0.204677] highmem bounce pool size: 64 pages
[    0.209324] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.209632] fuse init (API version 7.18)
[    0.209947] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.210884] aufs 3.3-20120402
[    0.211077] msgmni has been set to 1743
[    0.211349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.211588] io scheduler noop registered
[    0.211727] io scheduler cfq registered (default)
[    0.212223] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.212659] isapnp: Scanning for PnP cards...
[    0.569508] isapnp: No Plug & Play device found
[    0.596600] brd: module loaded
[    0.641266] loop: module loaded
[    0.641913] ahci 0000:00:1f.2: version 3.0
[    0.641957] ahci: probe of 0000:00:1f.2 failed with error -22
[    0.642542] ata_piix 0000:00:1f.2: version 2.13
[    0.642556] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.642868] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.643493] scsi0 : ata_piix
[    0.643751] scsi1 : ata_piix
[    0.644783] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[    0.644927] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[    0.647977] Fusion MPT base driver 3.04.20
[    0.648137] Copyright (c) 1999-2008 LSI Corporation
[    0.648286] Fusion MPT SPI Host driver 3.04.20
[    0.648473] Fusion MPT FC Host driver 3.04.20
[    0.648658] Fusion MPT SAS Host driver 3.04.20
[    0.648886] yenta_cardbus 0000:06:04.0: CardBus bridge found [1179:ff00]
[    0.649103] yenta_cardbus 0000:06:04.0: Enabling burst memory read transactions
[    0.649344] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[    0.649583] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[    0.649727] yenta_cardbus 0000:06:04.0: TI: mfunc 0x100a1b22, devctl 0x66
[    0.799271] ata1.00: ATA-6: TOSHIBA MK6026GAX, PA200U, max UDMA/100
[    0.799413] ata1.00: 117210240 sectors, multi 16: LBA
[    0.799552] ata1.00: applying bridge limits
[    0.800514] ata2.00: ATAPI: MATSHITADVD-RAM UJ-831S, 1.40, max UDMA/33
[    0.802262] ata1.00: configured for UDMA/100
[    0.802549] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6026GA PA20 PQ: 0 ANSI: 5
[    0.803237] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    0.803533] sd 0:0:0:0: [sda] Write Protect is off
[    0.803672] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.803699] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.806394] ata2.00: configured for UDMA/33
[    0.818720] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-831S  1.40 PQ: 0 ANSI: 5
[    0.820754] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.820991] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.821360] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.064654]  sda: sda1
[    1.065072] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.187824] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[    1.187967] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[    1.188119] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[    1.188365] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[    1.188605] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff
[    1.194808] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xb8000000-0xb80fffff]
[    1.195058] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb8000000-0xb80fffff: excluding 0xb8000000-0xb800ffff
[    1.195405] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x44000000-0x47ffffff pref]
[    1.195647] pcmcia_socket pcmcia_socket0: cs: memory probe 0x44000000-0x47ffffff: excluding 0x44000000-0x47ffffff
[    1.196282] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.196466] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.196471] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.196617] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.196924] ehci_hcd 0000:00:1d.7: debug port 1
[    1.200951] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.200972] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000
[    1.204018] Refined TSC clocksource calibration: 1728.999 MHz.
[    1.204161] Switching to clocksource tsc
[    1.207009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.207343] hub 1-0:1.0: USB hub found
[    1.207481] hub 1-0:1.0: 8 ports detected
[    1.207738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.207924] uhci_hcd: USB Universal Host Controller Interface driver
[    1.208109] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.208114] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.208255] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.208520] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.208854] hub 2-0:1.0: USB hub found
[    1.208991] hub 2-0:1.0: 2 ports detected
[    1.209215] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.209219] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.209361] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.209634] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.209954] hub 3-0:1.0: USB hub found
[    1.210103] hub 3-0:1.0: 2 ports detected
[    1.210309] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.210313] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.210459] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.210731] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.211074] hub 4-0:1.0: USB hub found
[    1.211211] hub 4-0:1.0: 2 ports detected
[    1.211420] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.211425] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.211565] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.211826] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.212164] hub 5-0:1.0: USB hub found
[    1.212301] hub 5-0:1.0: 2 ports detected
[    1.212581] Initializing USB Mass Storage driver...
[    1.212778] usbcore: registered new interface driver usb-storage
[    1.212919] USB Mass Storage support registered.
[    1.213102] usbcore: registered new interface driver ums-alauda
[    1.213277] usbcore: registered new interface driver ums-cypress
[    1.213456] usbcore: registered new interface driver ums-datafab
[    1.213631] usbcore: registered new interface driver ums_eneub6250
[    1.213809] usbcore: registered new interface driver ums-freecom
[    1.213986] usbcore: registered new interface driver ums-isd200
[    1.214177] usbcore: registered new interface driver ums-jumpshot
[    1.214353] usbcore: registered new interface driver ums-karma
[    1.217432] usbcore: registered new interface driver ums-onetouch
[    1.217612] usbcore: registered new interface driver ums-realtek
[    1.217787] usbcore: registered new interface driver ums-sddr09
[    1.217968] usbcore: registered new interface driver ums-sddr55
[    1.218165] usbcore: registered new interface driver ums-usbat
[    1.218406] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.218988] i8042: Detected active multiplexing controller, rev 1.1
[    1.219222] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.219397] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.219539] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.219678] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.219815] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.220153] rtc_cmos 00:06: RTC can wake from S4
[    1.220522] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.220695] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.221066] EISA: Probing bus 0 at eisa.0
[    1.221207] Cannot allocate resource for EISA slot 1
[    1.221345] Cannot allocate resource for EISA slot 2
[    1.221483] Cannot allocate resource for EISA slot 3
[    1.221620] Cannot allocate resource for EISA slot 4
[    1.221774] EISA: Detected 0 cards.
[    1.221908] cpuidle: using governor ladder
[    1.222063] cpuidle: using governor menu
[    1.222350] usbcore: registered new interface driver usbhid
[    1.222489] usbhid: USB HID core driver
[    1.222761] ashmem: initialized
[    1.222943] logger: created 256K log 'log_main'
[    1.223140] logger: created 256K log 'log_events'
[    1.223322] logger: created 256K log 'log_radio'
[    1.223505] logger: created 256K log 'log_system'
[    1.223778] fujitsu-tablet: Unknown (using defaults)
[    1.224052] TCP cubic registered
[    1.224188] NET: Registered protocol family 17
[    1.224341] Using IPI No-Shortcut mode
[    1.224635] registered taskstats version 1
[    1.225172] rtc_cmos 00:06: setting system clock to 2012-08-05 21:09:26 UTC (1344200966)
[    1.227366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.231486] RAMDISK: xz image found at block 0
[    1.631571] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[    1.632021] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[    1.632178] VFS: Mounted root (ext4 filesystem) on device 1:0.
[    1.632358] Freeing unused kernel memory: 444k freed
[    1.632758] BFS CPU scheduler v0.420 by Con Kolivas.
[    2.449928] ISO 9660 Extensions: Microsoft Joliet Level 3
[    2.498606] ISO 9660 Extensions: RRIP_1991A
[   13.445394] udev[2075]: starting version 165
[   19.420909] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[   19.421611] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   19.422368] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   19.424136] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[   19.424200] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   19.424264] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   19.424330] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   24.034277] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   24.034337] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   24.441813] Linux agpgart interface v0.103
[   24.831837] sky2: driver version 1.30
[   24.831949] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
[   24.832093] sky2 0000:02:00.0: irq 41 for MSI/MSI-X
[   24.832879] sky2 0000:02:00.0: eth0: addr 00:0f:b0:9b:e7:a1
[   27.269335] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[   27.269448] ACPI: Lid Switch [LID0]
[   27.269519] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   27.269556] ACPI: Power Button [PWRB]
[   27.269640] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   27.269677] ACPI: Power Button [PWRF]
[   27.821312] intel_rng: FWH not detected
[   27.946608] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   28.008121] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   28.008272] ACPI: AC Adapter [ACAD] (on-line)
[   28.009323] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[   28.009388] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[   28.010407] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[   28.010732] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   28.051438] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   28.051449] ACPI: Battery Slot [BAT1] (battery present)
[   28.327710] ACPI Warning: 0x000020a0-0x000020bf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251)
[   28.327723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   28.554306] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input4
[   28.570850] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input5
[   28.860159] firewire_ohci: Added fw-ohci device 0000:06:04.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[   28.870171] Marking TSC unstable due to TSC halts in idle
[   28.870216] ACPI: acpi_idle registered with cpuidle
[   28.878030] Switching to clocksource hpet
[   28.936292] mousedev: PS/2 mouse device common for all mice
[   29.269119] [drm] Initialized drm 1.1.0 20060810
[   29.282040] i915 0000:00:02.0: setting latency timer to 64
[   29.284391] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   29.284395] [drm] Driver supports precise vblank timestamp query.
[   29.284483] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   29.361111] firewire_core: created device fw0: GUID 00023f586940ab8b, S400
[   29.364236] fixme: max PWM is zero.
[   29.635787] [drm] initialized overlay support
[   29.873360] fbcon: inteldrmfb (fb0) is primary device
[   29.917908] Console: switching to colour frame buffer device 128x48
[   29.923472] fb0: inteldrmfb frame buffer device
[   29.923474] drm: registered panic notifier
[   29.923621] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   29.923813] acpi device:08: registered as cooling_device1
[   29.923911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[   29.926446] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[   29.926505] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   29.926564] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[   30.739030] intel8x0_measure_ac97_clock: measured 50334 usecs (2426 samples)
[   30.739034] intel8x0: clocking to 48000
[   48.038028] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[   48.154849] scsi2 : usb-storage 1-3:1.0
[   49.156951] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[   49.159322] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   49.416684] sd 2:0:0:0: [sdb] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
[   49.417166] sd 2:0:0:0: [sdb] Write Protect is off
[   49.417171] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[   49.417670] sd 2:0:0:0: [sdb] No Caching mode page present
[   49.417674] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   49.420298] sd 2:0:0:0: [sdb] No Caching mode page present
[   49.420302] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   49.421207]  sdb:
[   49.423170] sd 2:0:0:0: [sdb] No Caching mode page present
[   49.423173] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   49.423177] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   56.368190] NET: Registered protocol family 10
[   69.019916] sky2 0000:02:00.0: eth0: enabling interface
[   69.020332] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   82.099274] start_kdeinit (3289): /proc/3289/oom_adj is deprecated, please use /proc/3289/oom_score_adj instead.
[  126.768992] ACPI: EC: GPE storm detected, transactions will use polling mode


Muchas gracias por la ayuda, ya intente bajarme una beta del 4.2 pero al poco de abrirse se me quedaba bloqueada.

alvarotole

  • Visitante
Re: Wifislax 4.1 no me reconoce broadcom 43222
« Respuesta #6 en: 09-08-2012, 13:15 (Jueves) »
¿Alguien me puede echar una manita?

alvarotole

  • Visitante
Re: Wifislax 4.1 no me reconoce broadcom 43222
« Respuesta #7 en: 16-08-2012, 23:30 (Jueves) »
Bueno, como habeis liberado wifislax 4.2 la he probado por si acaso y el resultado ha sido el mismo hasta que mas o menos en dos minutos se ma ha quedado congelado y no me respondia el ratón.

Chumpy

  • Visitante
Re: Wifislax 4.1 no me reconoce broadcom 43222
« Respuesta #8 en: 16-08-2012, 23:53 (Jueves) »
Pues eso que dices es raro... Podrías hacer alguna prueba más? El sistema no debería bloquearse en nigún caso. Puedes probar otros modos de inicio?

alvarotole

  • Visitante
Re: Wifislax 4.1 no me reconoce broadcom 43222
« Respuesta #9 en: 18-08-2012, 12:12 (Sábado) »
Pues tu me dirás que quieres que pruebe, he iniciado en modo auto y en modo vesa y en los dos me pasa, luego en modo ati y en modo nvidia y no llega a cargar, me imagino que porque mi gráfica si no estoy equivocado es intel.