El unico que tiene que agradecer soy yo, que soy el que tengo la Broadcom sin funcionar
Bueno, vamos avanzando..., la reconoce
Lo que pude copiar de la consola
patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 245 (offset 5 lines).
patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 386 (offset 1 line).
patching file Makefile
patching file src/wl/sys/wl_iw.h
Compilando el driver....
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
make[1]: Entering directory `/usr/src/linux-3.2.12'
make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule
.
CFG80211 API is prefered for this kernel version
Using CFG80211 API
LD /bin/Broadcom/built-in.o
CC [M] /bin/Broadcom/src/shared/linux_osl.o
CC [M] /bin/Broadcom/src/wl/sys/wl_linux.o
CC [M] /bin/Broadcom/src/wl/sys/wl_iw.o
CC [M] /bin/Broadcom/src/wl/sys/wl_cfg80211.o
LD [M] /bin/Broadcom/wl.o
Building modules, stage 2.
CFG80211 API is prefered for this kernel version
Using CFG80211 API
MODPOST 1 modules
CC /bin/Broadcom/wl.mod.o
LD [M] /bin/Broadcom/wl.ko
make[1]: Leaving directory `/usr/src/linux-3.2.12'
Instalando paquete....
install -D -m 755 wl.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless/wl.ko
Actualizando lista de drivers del sistema....
Blacklisteando drivers conflictivos....
Blacklisteando b43....
Blacklisteando bcma....
Blacklisteando ssb....
Desmontamos drivers conflictivos....
Si ves mensajes de ERROR , es por que ese driver no estaba usandose....
Montamos el driver wl....
*******************************
| La instalacion a finalizado |
*******************************
Comprobamos interfaces...
lo no wireless extensions.
eth1 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=30 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
eth0 no wireless extensions.
Generando modulo xzm....
[+]Creando log var/log/packages/Driver-broadcom-3.2.12-wifislax
Parallel mksquashfs: Using 2 processors
Creating 4.0 filesystem on /root/Desktop/Driver-broadcom-3.2.12-wifislax.xzm, block size 1048576.
[====================================================================================|] 24/24 100%
Exportable Squashfs 4.0 filesystem, xz compressed, data block size 1048576
compressed data, compressed metadata, compressed fragments, compressed xattrs
duplicates are removed
Filesystem size 965.00 Kbytes (0.94 Mbytes)
15.58% of uncompressed filesystem size (6194.11 Kbytes)
Inode table size 382 bytes (0.37 Kbytes)
33.69% of uncompressed inode table size (1134 bytes)
Directory table size 462 bytes (0.45 Kbytes)
54.67% of uncompressed directory table size (845 bytes)
Number of duplicate files found 0
Number of inodes 35
Number of files 22
Number of fragments 5
Number of symbolic links 0
Number of device nodes 0
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 13
Number of ids (unique uids + gids) 1
Number of uids 1
root (0)
Number of gids 1
root (0)
Limpiando temporales...
*******************************
| Modulo Creado Correctamente |
*******************************
Si utilizas wifislax en modo live , copia el fichero .xzm en la carpeta base
Si utilizas wifislax instalado en hd puedes borrar el fichero .xzm
Este paso solo lo has de hacer una vez, despues ya no sera necesario
************************
| Disfruta de Wifislax |
************************
wifislax Broadcom #
La reconoce como "abg" y sino me equivoco es "bgn"...:
eth1 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
No pude hacela conectar, se queda en la obtención de IP...
Tampoco pude hacerla poner en modo monitor con airoscript...
No intente cambiarle la MAC
Mañana sigo trasteando con ella
Muchísimas gracias
Salu2
