Berni creo que te refieres a esto: (mi tarjeta es la 1300 y no 1350, me equivoqué)
"The TrueMobile 1300 is a 54g(TM) wireless LAN mini-PCI card based on
Broadcom's BCM4306/BCM2050 chipset".
Por tanto el chipset es broadcom. Baje un driver de broadcom que hay pero no me lo coge. No se si es que estara en otra parte. Me sale el mensaje que puse en el primer post.
Leyendo el archivo readme.txt que lleva el driver Broadcomo que me he bajado de esta web dice lo siguiente:
"List of supported Hardware and Software:
1. BRCM driver version (3.40.100.0).
2. This driver (3.40.100.0) is supported on Windows XP (Service Pack 1), and
Windows 2000 (Service Pack 4).
3. This driver (3.40.100.0) supports AiroPeek SE, AiroPeek NX, OmniPeek, and Omni Engine.
4. BRCM wireless adapter: 4306, 4309, 4301 (MiniPCI, Cardbus)
IMPORTANT NOTES!
The BRCM wireless adapter must be the only 802.11 card installed.
Windows Zero Config must be disabled before the driver can be used.
Windows 95, 98, ME and NT4 are not supported.
Pre-Install Requirement for systems that currently have an 802.11 wireless card installed.
1. From the Device Manager window, select and expand Network adapters.
2. If there are any wireless devices under this category that are not BRCM,
or there is more than one 802.11 card, disable and uninstall them.
3. Uninstall all 802.11 card configuration utilities. These types of utilities
are sometimes installed when you install the OEM driver provided with the
adapter.
4. Windows Zero Config must not have any Preferred networks selected.
Go to the Wireless Networks tab in properties for the BRCM adapter and
remove all Preferred networks listed.
5. Disable the Windows Wireless Zero Configuration service from the services
control panel.
2. Correct channel selection may not occur in Peek for some adapters when selecting a channel by BSSID or ESSID. There is no workaround at this time.
Driver Limitations:
- This Driver works only for Wireless capture. It can not be used for Network Services.
- All 802.11 utilities, physical devices, and drivers must be removed to allow installation of the driver. This includes physically removing non-BRCM built-in MiniPCI adapters and stopping the wireless zero configuration service. "
Mi ingles no esta my allá. No se si tu extraes conclusiones de este texto
¿Sabrias decirme drivers de broadcom para probarlos? Te lo agradeceria enormemente. Gracias Un saludo.
