hola el modelo que tengo es el aspire DK250-0DK tiene windows 7 starte instalado y una tarjeta atheros
el problema que tengo es que cuando entro en el aministrador no reconoce la tarjeta de red la unica que aparece es la wireless he intentado instalar debian y tampoco reconoce
pense que la habia desabilitado de la bios cuando cambie las opciones de arranque pero tampo es eso ya no se que hacer teneis alguna idea para solucionar esto
un saludo
Post Merge: 25-03-2010, 00:00 (Jueves)
sigo con el lio este ahora estoy probando con bt4 liveusb
root@bt:~# uname -r
2.6.30.9
root@bt:~# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:200 (200.0 B) TX bytes:200 (200.0 B)
wlan0 Link encap:Ethernet HWaddr
inet addr:19 Bcast:1255 Mask:
inet6 addr: fe80::e60:76ff:fe09:99a2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1440 errors:0 dropped:0 overruns:0 frame:0
TX packets:1189 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1772061 (1.7 MB) TX bytes:196053 (196.0 KB)
wmaster0 Link encap:UNSPEC HWaddr 0C-60-76-09-99-A2-39-61-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
un lspci no lo he copiado completo pero como veis solo reconoce la wireless
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
y el dmesg | grep pci
root@bt:~# dmesg | grep pci
ACPI: bus type pci registered
pci 0000:00:02.0: reg 10 32bit mmio: [0x58180000-0x581fffff]
pci 0000:00:02.0: reg 14 io port: [0x50f0-0x50f7]
pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0x58200000-0x5823ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0x58100000-0x5817ffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0x58240000-0x58243fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x58244400-0x582447ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.2: reg 10 io port: [0x50d8-0x50df]
pci 0000:00:1f.2: reg 14 io port: [0x50fc-0x50ff]
pci 0000:00:1f.2: reg 18 io port: [0x50d0-0x50d7]
pci 0000:00:1f.2: reg 1c io port: [0x50f8-0x50fb]
pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0x58244000-0x582443ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
pci 0000:01:00.0: reg 10 64bit mmio: [0x57000000-0x5700ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D1 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x57000000-0x580fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0x56000000-0x56ffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x51ffffff]
pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0x55000000-0x55ffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52000000-0x52ffffff]
pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0x54000000-0x54ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53000000-0x53ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0x4000-0x4fff
pci 0000:00:1c.0: MEM window: 0x57000000-0x580fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0x56000000-0x56ffffff
pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x00000051ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: 0x2000-0x2fff
pci 0000:00:1c.2: MEM window: 0x55000000-0x55ffffff
pci 0000:00:1c.2: PREFETCH window: 0x00000052000000-0x00000052ffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.3: IO window: 0x1000-0x1fff
pci 0000:00:1c.3: MEM window: 0x54000000-0x54ffffff
pci 0000:00:1c.3: PREFETCH window: 0x00000053000000-0x00000053ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0000 -> 0003)
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0000 -> 0003)
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: enabling device (0000 -> 0003)
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:01: resource 1 mem: [0x57000000-0x580fffff]
pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0x56000000-0x56ffffff]
pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff]
pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0x55000000-0x55ffffff]
pci_bus 0000:03: resource 2 pref mem [0x52000000-0x52ffffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem: [0x54000000-0x54ffffff]
pci_bus 0000:04: resource 2 pref mem [0x53000000-0x53ffffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
dmesg | grep atheros
oot@bt:~# dmesg | grep Atheros
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8a60000, irq=16
como podeis ver no aparece por ningun lado
p.d pongo esto aqui porque creo que el problema es del pc no de los o.s
Post Merge: 27-03-2010, 10:31 (Sábado)

ya lo he arreglado ha sido la cosa mas estupida del mundo os comento esto me paso por que intente hacer una instalacion debian squeeze
al intentar configurar la red me tira abajo la tarjeta haci que despues de volverme loco apage el pc y lo desechufe de la corriente y ahora me aparece la interface dos diass con esta chorrada