Buenas, ya he compilado una imagen desde este repositorio:
git clone git://github.com/openwrt-es/barrier-breaker-openwrt.git -b barrier-breaker_13.12
El problema lo tengo para poder flashear desde el CFE. He configura el TFTP en el 192.168.1.100, pero cuando le doy al comando "f" me da esto:
CFE> f
Loading 192.168.1.100:bcm963xx_fs_kernel ...
Loading failed.: CFE error -21
*** command status = -21
He probado con otra imagen que existe en este post, pero me da el mismo error.
Si dejo que arranque me da esto:
CFE>
CFE timeout,reboot
Resetting board...
CFE version 1.0.37-102.6 for BCM96368 (32bit,SP,BE)
Build Date: Sun Jul 24 16:58:20 CST 2011 (wangxinfeng@build.huawei.com)
Copyright (C) 2000-2008 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 3
Boot image (0=latest, 1=previous) : 0
Board Id (0-5) : 96368MVWG_hg622
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:e0:fc:xx:xx:xx (lo oculto)
PSI Size (1-64) KBytes : 64
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (3 seconds) ***
Auto run second count down: 0
Support Double system.
Flash boot Flag:
Boot from main system!
Linux kernel CRC error. Corrupted image? ../../../cfe/arch/mips/board/bcm63xx_ram/src/bcm63xx_cmd.c 749
Image error !Entry address:0xffffffff puiCmpImage:0xb8010100
Double system MAIN boot failed !
MAIND first Double Image is error boot failed !
System can not boot,go to CFE
web info: Waiting for connection on socket 0.
Me falta por configurar algo?
Gracias por todo y hasta pronto.