?>/script>'; } ?> [Desarrollo] OpenWrt en Comtrend AR-5381u Widgets Magazine
« anterior próximo »
Páginas: 1 ... 7 8 9 10 11 12 13 [14]   Ir Abajo

Autor Tema: [Desarrollo] OpenWrt en Comtrend AR-5381u  (Leído 174194 veces)

0 Usuarios y 1 Visitante están viendo este tema.

aka-kuro

  • Visitante
Re: [Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #260 en: 23-07-2017, 20:46 (Domingo) »
Vuenas e configurado el router como neutro, en la otra punta de la casa todo va bien. El problema que si conecto el rj45 en el wan no se ve samba en la raspberry, pero si lo conecto en el lan si pero no da internet.
Al guna solucion
En línea

Desconectado peperfus

  • ******
  • Mensajes: 251
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #261 en: 04-06-2023, 22:33 (Domingo) »
Holas

Trasteando, resulta que me he cargado la wifi del router (no físicamente, sino en el firmware).
Recordé que al HG556a se le podía recuperar la wifi restaurando la cal_data desde otro firmware que había en un tutorial...
Pero no he encontrado ningún tutorial similar para este router....

¿Alguien podría pasarme el cal_data de su AR5381u ?
Supongo que usando el mismo método del tutorial del HG556a pero con este cal_data, funcionará. O al menos, eso espero.

Gracias
En línea

Desconectado Tki2000

  • Moderador
  • *
  • Mensajes: 2247
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #262 en: 06-06-2023, 09:42 (Martes) »
Según la página oficial de OpenWrt, la calibración wifi de ese router no está en EEPROM ni en partición.

Citar
No physical EEPROM at the board, nor partition reserverd for this data at the flash chip. In theory, in the original firmware, the EEPROM is taken from the file /etc/wlan/bcm43225_map.bin, although some bytes differ when comparing with wlctl dumps.

¿No te hará falta incluir el fichero de firmware? ¿Se te habrá corrompido?
En línea

Desconectado peperfus

  • ******
  • Mensajes: 251
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #263 en: 06-06-2023, 23:56 (Martes) »
Hola, Tki2000
Gracias por la respuesta.

Perdona, pero no sé a qué te refieres, estoy instalando firmware ya compilado, no haciendo uno nuevo. ...

Este router lo tenía por ahí en un armario y haciendo limpieza  ^-^ lo he mirado y no sale la opción wifi en el menú de Network...
Recuerdo que es posible que, haciendo una prueba tonta, le haya flasheado algún archivo absurdo como un mp3 (o cualquiera), simplemente para demostrar que se podía recuperar mediante el botón de reset y el reflasheo por defecto (método maravillosamente sencillo de recuperación). Y creo que a partir de ahí ya me desapareció la wifi.

¿Se te ocurre cómo arreglarlo  ¿si es posible?? Si no, tampoco es ninguna ruina, más que nada es curiosidad.
« Última modificación: 07-06-2023, 13:17 (Miércoles) por peperfus »
En línea

Desconectado peperfus

  • ******
  • Mensajes: 251
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #264 en: 07-06-2023, 15:14 (Miércoles) »
Ahora me ha pasado algo más raro aún.  ???

He flasheado uno de los que se supone que son firmware original oficial de jazztel ...
Y creo que se ha quedado frito el router. No se enciende ni el led de power, me marca cable de red desconectado ...
 Voy a ver si el trafo sigue dando corriente con un multímetro a ver si fuera eso...
En línea

Desconectado peperfus

  • ******
  • Mensajes: 251
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #265 en: 07-06-2023, 15:26 (Miércoles) »
Vale, creo que ya sé qué ha pasado. He comprobado el transofrmador y funciona bien, luego lo he vuelto a enchifar al router y ya se enciende.

Ha debido de ser que se ha recalentado, porque lo tenía justo detrás del portátil, soltándole el aire caliente al pobre. Al haberlo desenchufado un rato, se ha refrescado y vuelve a funcionar.

Sin embargo, al flashear el firmware de jazztel, se queda en boot-loop todo el rato, ni idea de por qué. Voy a buscar más firmwares a ver.

EDITO: buscar otros firmwares no tiene sentido, Pepe, céntrate. Los firmwares probados son (en teoría) correctos. Además, el método de flasheo también es correcto. Ambas cuales cosas me hace desistir hasta nueva pista o idea que probar.

El router funciona bien con openwrt, pero sin wifi.
Al flashearlo con firmware de jazztel, entra en boot loop infinito.
« Última modificación: 08-06-2023, 10:01 (Jueves) por peperfus »
En línea

Desconectado Tki2000

  • Moderador
  • *
  • Mensajes: 2247
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #266 en: 08-06-2023, 13:17 (Jueves) »
¿Lo has compilado con el driver b43?
¿Hay mensajes de que se encuentre la wifi en los logs de arranque?

Código: [Seleccionar]
b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[...]
b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
En línea

Desconectado peperfus

  • ******
  • Mensajes: 251
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #267 en: 08-06-2023, 19:49 (Jueves) »
No lo he compilado, los firmwares que flasheo son los propios de openwrt ...

Aquí el log de Barrier Breaker
Código: [Seleccionar]
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42625) ) #3 Wed Oct 1 15:07:11 CEST 2014
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] Detected Broadcom 0x6328 CPU revision b0
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] CPU frequency is 320 MHz
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] 64MB of RAM installed
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] registering 32 GPIOs
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] board_bcm963xx: Boot address 0xb8000000
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] board_bcm963xx: CFE version: 1.0.37-106.5
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] board: board name: 96328A-1241N
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] Determined physical RAM map:
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.000000] Zone ranges:
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.000000] Movable zone start for each node
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.000000] Early memory node ranges
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80318c60, node_mem_map 81000000
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] Memory: 61144k/65536k available (2485k kernel code, 4392k reserved, 725k data, 308k init, 0k highmem)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.000000] NR_IRQS:256
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.036000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.036000] pid_max: default: 32768 minimum: 301
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.040000] Mount-cache hash table entries: 512
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.048000] NET: Registered protocol family 16
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.288000] registering PCI controller with io_map_base unset
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.300000] bio: create slab <bio-0> at 0
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.308000] PCI host bridge to bus 0000:00
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.312000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.316000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.320000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.324000] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.324000] pci 0000:00:00.0: PME# supported from D0 D3hot
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.324000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.328000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.328000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.328000] pci 0000:00:00.0: PCI bridge to [bus 01]
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.332000] Switching to clocksource MIPS
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.340000] NET: Registered protocol family 2
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.348000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.356000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.360000] TCP: Hash tables configured (established 512 bind 512)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.368000] TCP: reno registered
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.376000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.384000] NET: Registered protocol family 1
Wed Oct  1 13:13:11 2014 kern.debug kernel: [    0.388000] PCI: CLS 0 bytes, default 16
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.392000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.400000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.408000] msgmni has been set to 119
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.416000] io scheduler noop registered
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.420000] io scheduler deadline registered (default)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.424000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.432000] console [ttyS0] enabled, bootconsole disabled
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.452000] m25p80 spi1.0: found mx25l12805d, expected m25p80
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.456000] m25p80 spi1.0: mx25l12805d (16384 Kbytes)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.464000] bcm63xxpart: CFE boot tag found with version 6 and board type 96328A-1241N
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.472000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.480000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.484000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length ec0000
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.492000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.500000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.508000] bcm63xxpart: Spare partition is offset 350004 and length c9fffc
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.516000] 5 bcm63xxpart partitions found on MTD device spi1.0
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.520000] Creating 5 MTD partitions on "spi1.0":
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.524000] 0x000000000000-0x000000010000 : "CFE"
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.532000] 0x000000010100-0x000000130000 : "kernel"
Wed Oct  1 13:13:11 2014 kern.warn kernel: [    0.540000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.556000] 0x000000130000-0x000000ff0000 : "rootfs"
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.564000] mtd: device 2 (rootfs) set to be root filesystem
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.568000] mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0xca0000
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.576000] 0x000000350000-0x000000ff0000 : "rootfs_data"
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.584000] 0x000000ff0000-0x000001000000 : "nvram"
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.592000] 0x000000010000-0x000000ff0000 : "linux"
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.644000] b53_common: found switch: BCM63xx, rev 0
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.652000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.660000] TCP: cubic registered
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.664000] NET: Registered protocol family 17
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    0.668000] Bridge firewalling registered
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.672000] 8021q: 802.1Q VLAN Support v1.8
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.692000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Wed Oct  1 13:13:11 2014 kern.info kernel: [    0.704000] Freeing unused kernel memory: 308K (80333000 - 80380000)
Wed Oct  1 13:13:11 2014 kern.info kernel: [    4.128000] Button Hotplug driver version 0.4.1
Wed Oct  1 13:13:11 2014 kern.info kernel: [    4.140000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
Wed Oct  1 13:13:11 2014 kern.info kernel: [    4.976000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
Wed Oct  1 13:13:11 2014 kern.notice kernel: [    8.684000] jffs2: notice: (209) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 25 of xref (0 dead, 9 orphan) found.
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.436000] NET: Registered protocol family 10
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.468000] nf_conntrack version 0.5.0 (960 buckets, 3840 max)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.488000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.508000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.516000] Backport generated by backports.git backports-20140320-37-g5c33da0
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.532000] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.608000] xt_time: kernel timezone is -0000
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.668000] cfg80211: Calling CRDA to update world regulatory domain
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.680000] cfg80211: World regulatory domain updated:
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.684000] cfg80211:  DFS Master region: unset
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.688000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.700000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.708000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.716000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.724000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.732000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.740000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.748000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.756000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.880000] PPP generic driver version 2.4.2
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.888000] NET: Registered protocol family 24
Wed Oct  1 13:13:11 2014 kern.info kernel: [   11.944000] Broadcom 43xx driver loaded [ Features: PNL ]
Wed Oct  1 13:13:11 2014 kern.info kernel: [   15.968000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
Wed Oct  1 13:13:15 2014 user.emerg syslog: setting up led POR QUE NO HAY WIFI
Wed Oct  1 13:13:15 2014 user.emerg syslog: setting up led AR-5381u:green:inet
Wed Oct  1 13:13:15 2014 user.emerg syslog: - init complete -
Wed Oct  1 13:13:17 2014 kern.info kernel: [   21.112000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
Wed Oct  1 13:13:17 2014 kern.info kernel: [   21.132000] device eth0.1 entered promiscuous mode
Wed Oct  1 13:13:17 2014 kern.info kernel: [   21.136000] device eth0 entered promiscuous mode
Wed Oct  1 13:13:17 2014 kern.info kernel: [   21.144000] br-lan: port 1(eth0.1) entered forwarding state
Wed Oct  1 13:13:17 2014 kern.info kernel: [   21.148000] br-lan: port 1(eth0.1) entered forwarding state
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Interface 'lan' is enabled
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Interface 'lan' is setting up now
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Interface 'lan' is now up
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Interface 'loopback' is enabled
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Interface 'loopback' is now up
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Network device 'eth0' link is up
Wed Oct  1 13:13:17 2014 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed Oct  1 13:13:17 2014 daemon.notice netifd: VLAN 'eth0.1' link is down
Wed Oct  1 13:13:17 2014 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Network device 'lo' link is up
Wed Oct  1 13:13:17 2014 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Oct  1 13:13:19 2014 kern.info kernel: [   23.152000] br-lan: port 1(eth0.1) entered forwarding state
Wed Oct  1 13:13:22 2014 daemon.info dnsmasq[636]: started, version 2.71 cachesize 150
Wed Oct  1 13:13:22 2014 daemon.info dnsmasq[636]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Wed Oct  1 13:13:22 2014 daemon.info dnsmasq-dhcp[636]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Wed Oct  1 13:13:22 2014 daemon.info dnsmasq[636]: using local addresses only for domain lan
Wed Oct  1 13:13:22 2014 daemon.warn dnsmasq[636]: no servers found in /tmp/resolv.conf.auto, will retry
Wed Oct  1 13:13:22 2014 daemon.info dnsmasq[636]: read /etc/hosts - 1 addresses
Wed Oct  1 13:13:22 2014 daemon.info dnsmasq[636]: read /tmp/hosts/dhcp - 1 addresses
Wed Oct  1 13:13:22 2014 daemon.info dnsmasq-dhcp[636]: read /etc/ethers - 0 addresses

Y aquí el log de la 22:
Código: [Seleccionar]
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.000000] Linux version 5.10.176 (builder@buildhost) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20134-5f15225c1e) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Thu Apr 27 20:28:15 2023
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Detected Broadcom 0x6328 CPU revision b0
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] CPU frequency is 320 MHz
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] 64MB of RAM installed
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] board_bcm963xx: Boot address 0xb8000000
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] board_bcm963xx: CFE version: 1.0.37-106.5
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] printk: bootconsole [early0] enabled
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] CPU0 revision is: 0002a075 (Broadcom BMIPS4350)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] board: board name: 96328A-1241N
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] MIPS: machine is Comtrend AR-5381u
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Zone ranges:
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Early memory node ranges
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    0.000000]   Normal zone: 144 pages used for memmap
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] Memory: 56192K/65536K available (5804K kernel code, 633K rwdata, 748K rodata, 1256K init, 205K bss, 9344K reserved, 0K cma-reserved)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] NR_IRQS: 256
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945377789 ns
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.000021] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421772796ns
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.008309] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.074778] pid_max: default: 32768 minimum: 301
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.079950] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.087487] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.101536] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.115176] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.125359] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.132541] pinctrl core: initialized pinctrl subsystem
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.144500] NET: Registered protocol family 16
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.150842] thermal_sys: Registered thermal governor 'step_wise'
Thu Apr 27 20:28:32 2023 kern.warn kernel: [    0.386944] registering PCI controller with io_map_base unset
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.512306] PCI host bridge to bus 0000:00
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.516578] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.523620] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.530673] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.537621] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.545891] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.552144] pci 0000:00:00.0: PME# supported from D0 D3hot
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.559280] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.568870] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.575653] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.582500] pci 0000:00:00.0: PCI bridge to [bus 01]
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.604580] clocksource: Switched to clocksource MIPS
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.613157] NET: Registered protocol family 2
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.618390] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.627888] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.636729] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.644691] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.651968] TCP: Hash tables configured (established 1024 bind 1024)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.659086] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.665933] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.673777] NET: Registered protocol family 1
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.678435] PCI: CLS 0 bytes, default 16
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.706290] workingset: timestamp_bits=14 max_order=14 bucket_order=0
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.723208] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.729285] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.743254] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.755096] bcm6328-pinctrl 10000080.pin-controller: registered at mmio (ptrval)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.765466] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 36, base_baud = 1562500) is a bcm63xx_uart
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.775230] printk: console [ttyS0] enabled
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.783784] printk: bootconsole [early0] disabled
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.831337] spi-nor spi1.0: mx25l12805d (16384 Kbytes)
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.838714] 3 fixed-partitions partitions found on MTD device spi1.0
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.845930] Creating 3 MTD partitions on "spi1.0":
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.850855] 0x000000000000-0x000000010000 : "cfe"
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.861890] 0x000000010000-0x000000ff0000 : "linux"
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.870793] parser_imagetag: rootfs: CFE image tag found at 0x0 with version 6, board type 96328A-1241N
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.880563] parser_imagetag: Partition 0 is kernel offset 100 and length 21fa34
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.888087] parser_imagetag: Partition 1 is rootfs offset 21fb34 and length dc04cc
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.895871] parser_imagetag: Spare partition is offset 5d0004 and length a0fffc
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.905294] 2 bcm963xx-imagetag partitions found on MTD device linux
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.911802] Creating 2 MTD partitions on "linux":
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.916750] 0x000000000100-0x00000021fb34 : "kernel"
Thu Apr 27 20:28:32 2023 kern.warn kernel: [    0.921804] mtd: partition "kernel" doesn't start on an erase/write block boundary -- force read-only
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.936349] 0x00000021fb34-0x000000fe0000 : "rootfs"
Thu Apr 27 20:28:32 2023 kern.warn kernel: [    0.941421] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
Thu Apr 27 20:28:32 2023 kern.info kernel: [    0.953517] mtd: setting mtd3 (rootfs) as root device
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.961248] 1 squashfs-split partitions found on MTD device rootfs
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.967670] 0x0000005d0000-0x000000fe0000 : "rootfs_data"
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    0.975986] 0x000000ff0000-0x000001000000 : "nvram"
Thu Apr 27 20:28:32 2023 kern.err kernel: [    0.997816] bcm63xx_enetsw bcm63xx_enetsw.0: IRQ index 1 not found
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.059601] b53_common: found switch: BCM63xx, rev 0
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.065490] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.073952] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.081185] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.088361] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.095537] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.102662] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.112300] NET: Registered protocol family 10
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.142834] Segment Routing with IPv6
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.146925] NET: Registered protocol family 17
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.151622] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.164995] 8021q: 802.1Q VLAN Support v1.8
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.183240] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.207571] Freeing unused kernel memory: 1256K
Thu Apr 27 20:28:32 2023 kern.warn kernel: [    1.212185] This architecture does not have kernel memory protection.
Thu Apr 27 20:28:32 2023 kern.info kernel: [    1.218903] Run /sbin/init as init process
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    1.223058]   with arguments:
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    1.223070]     /sbin/init
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    1.223081]   with environment:
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    1.223093]     HOME=/
Thu Apr 27 20:28:32 2023 kern.debug kernel: [    1.223104]     TERM=linux
Thu Apr 27 20:28:32 2023 user.info kernel: [    2.540837] init: Console is alive
Thu Apr 27 20:28:32 2023 user.info kernel: [    2.545344] init: - watchdog -
Thu Apr 27 20:28:32 2023 user.info kernel: [    4.597932] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Apr 27 20:28:32 2023 kern.info kernel: [    4.916960] usbcore: registered new interface driver usbfs
Thu Apr 27 20:28:32 2023 kern.info kernel: [    4.922742] usbcore: registered new interface driver hub
Thu Apr 27 20:28:32 2023 kern.info kernel: [    4.928491] usbcore: registered new device driver usb
Thu Apr 27 20:28:32 2023 kern.info kernel: [    4.957728] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Apr 27 20:28:32 2023 kern.info kernel: [    4.969192] fsl-ehci: Freescale EHCI Host controller driver
Thu Apr 27 20:28:32 2023 kern.info kernel: [    4.980614] ehci-platform: EHCI generic platform driver
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.104650] ehci-platform ehci-platform: EHCI Host Controller
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.110626] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.119274] ehci-platform ehci-platform: irq 50, io mem 0xb0002500
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.154652] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.165078] hub 1-0:1.0: USB hub found
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.170978] hub 1-0:1.0: 1 port detected
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.195115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.205706] ohci-platform: OHCI generic platform driver
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.211301] ohci-platform ohci-platform: Generic Platform OHCI controller
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.218426] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.226934] ohci-platform ohci-platform: irq 49, io mem 0xb0002600
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.300518] hub 2-0:1.0: USB hub found
Thu Apr 27 20:28:32 2023 kern.info kernel: [    5.306546] hub 2-0:1.0: 1 port detected
Thu Apr 27 20:28:32 2023 user.info kernel: [    5.314444] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Apr 27 20:28:32 2023 user.info kernel: [    5.332804] init: - preinit -
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    7.494215] random: jshn: uninitialized urandom read (4 bytes read)
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    7.603387] random: jshn: uninitialized urandom read (4 bytes read)
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    7.918889] random: jshn: uninitialized urandom read (4 bytes read)
Thu Apr 27 20:28:32 2023 kern.info kernel: [    9.007146] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
Thu Apr 27 20:28:32 2023 kern.info kernel: [    9.015480] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Thu Apr 27 20:28:32 2023 kern.notice kernel: [    9.355305] random: procd: uninitialized urandom read (4 bytes read)
Thu Apr 27 20:28:32 2023 kern.info kernel: [   10.045036] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Apr 27 20:28:32 2023 user.notice kernel: [   13.898431] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Thu Apr 27 20:28:32 2023 user.warn kernel: [   13.914026] urandom-seed: Seed file not found (/etc/urandom.seed)
Thu Apr 27 20:28:32 2023 kern.notice kernel: [   13.934720] random: crng init done
Thu Apr 27 20:28:32 2023 kern.notice kernel: [   13.938184] random: 2 urandom warning(s) missed due to ratelimiting
Thu Apr 27 20:28:32 2023 user.info kernel: [   14.209418] procd: - early -
Thu Apr 27 20:28:32 2023 user.info kernel: [   14.212956] procd: - watchdog -
Thu Apr 27 20:28:32 2023 user.info kernel: [   15.094138] procd: - watchdog -
Thu Apr 27 20:28:32 2023 user.info kernel: [   15.368549] procd: - ubus -
Thu Apr 27 20:28:32 2023 user.info kernel: [   15.537743] procd: - init -
Thu Apr 27 20:28:32 2023 user.info kernel: [   18.118916] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Apr 27 20:28:32 2023 user.info kernel: [   19.397940] urngd: v1.0.2 started.
Thu Apr 27 20:28:32 2023 kern.info kernel: [   19.691587] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
Thu Apr 27 20:28:32 2023 kern.info kernel: [   19.699441] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
Thu Apr 27 20:28:32 2023 kern.info kernel: [   20.616624] PPP generic driver version 2.4.2
Thu Apr 27 20:28:32 2023 kern.info kernel: [   20.629196] NET: Registered protocol family 24
Thu Apr 27 20:28:32 2023 kern.info kernel: [   20.693632] Broadcom 43xx driver loaded [ Features: PNL ]
Thu Apr 27 20:28:32 2023 user.info kernel: [   20.736146] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Apr 27 20:28:37 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Apr 27 20:28:37 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Apr 27 20:28:39 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Thu Apr 27 20:28:39 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Apr 27 20:28:58 2023 authpriv.info dropbear[1189]: Not backgrounding
Thu Apr 27 20:29:06 2023 daemon.notice wpa_supplicant[1297]: Successfully initialized wpa_supplicant
Thu Apr 27 20:29:07 2023 user.notice : Added device handler type: bonding
Thu Apr 27 20:29:07 2023 user.notice : Added device handler type: 8021ad
Thu Apr 27 20:29:07 2023 user.notice : Added device handler type: 8021q
Thu Apr 27 20:29:07 2023 user.notice : Added device handler type: macvlan
Thu Apr 27 20:29:07 2023 user.notice : Added device handler type: veth
Thu Apr 27 20:29:07 2023 user.notice : Added device handler type: bridge
Thu Apr 27 20:29:07 2023 user.notice : Added device handler type: Network device
Thu Apr 27 20:29:07 2023 user.notice : Added device handler type: tunnel
Thu Apr 27 20:29:14 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Thu Apr 27 20:29:14 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Thu Apr 27 20:29:14 2023 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Thu Apr 27 20:29:14 2023 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Thu Apr 27 20:29:15 2023 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Thu Apr 27 20:29:15 2023 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Thu Apr 27 20:29:17 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Apr 27 20:29:17 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Apr 27 20:29:18 2023 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Thu Apr 27 20:29:18 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Thu Apr 27 20:29:20 2023 kern.warn kernel: [   81.419057] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
Thu Apr 27 20:29:20 2023 kern.warn kernel: [   81.444793] jffs2_build_filesystem(): unlocking the mtd device...
Thu Apr 27 20:29:20 2023 kern.warn kernel: [   81.444957] done.
Thu Apr 27 20:29:21 2023 kern.warn kernel: [   81.453250] jffs2_build_filesystem(): erasing all blocks after the end marker...
Thu Apr 27 20:29:21 2023 kern.info kernel: [   82.345192] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
Thu Apr 27 20:29:21 2023 kern.info kernel: [   82.390260] br-lan: port 1(eth0.1) entered blocking state
Thu Apr 27 20:29:21 2023 kern.info kernel: [   82.395878] br-lan: port 1(eth0.1) entered disabled state
Thu Apr 27 20:29:21 2023 kern.info kernel: [   82.402078] device eth0.1 entered promiscuous mode
Thu Apr 27 20:29:21 2023 kern.info kernel: [   82.407062] device eth0 entered promiscuous mode
Thu Apr 27 20:29:21 2023 kern.info kernel: [   82.484157] br-lan: port 1(eth0.1) entered blocking state
Thu Apr 27 20:29:21 2023 kern.info kernel: [   82.489761] br-lan: port 1(eth0.1) entered forwarding state
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Interface 'lan' is enabled
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Interface 'lan' is setting up now
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Interface 'lan' is now up
Thu Apr 27 20:29:21 2023 daemon.notice netifd: bridge 'br-lan' link is up
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Interface 'loopback' is enabled
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Interface 'loopback' is now up
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Network device 'eth0' link is up
Thu Apr 27 20:29:21 2023 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Network device 'lo' link is up
Thu Apr 27 20:29:21 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Apr 27 20:29:22 2023 authpriv.info dropbear[1845]: Child connection from 192.168.1.3:49956
Thu Apr 27 20:29:22 2023 kern.info kernel: [   83.406000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Apr 27 20:29:22 2023 daemon.err odhcpd[1419]: Failed to send to ff02::1%lan@br-lan (Address not available)
Thu Apr 27 20:29:25 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Apr 27 20:29:35 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Apr 27 20:29:36 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Apr 27 20:29:36 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Apr 27 20:29:57 2023 authpriv.info dropbear[1845]: Exit before auth from <192.168.1.3:49956>: Exited normally
Thu Apr 27 20:30:20 2023 user.info : luci: accepted login on / for root from 192.168.1.3
Thu Apr 27 20:30:31 2023 kern.warn kernel: [  152.769985] done.
Thu Apr 27 20:30:31 2023 kern.notice kernel: [  152.771971] jffs2: notice: (1789) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Apr 27 20:30:32 2023 kern.warn kernel: [  153.246679] overlayfs: upper fs does not support tmpfile.
Thu Apr 27 20:30:32 2023 daemon.info mount_root: performing overlay whiteout
Thu Apr 27 20:30:32 2023 daemon.info mount_root: synchronizing overlay
Thu Apr 27 20:30:32 2023 daemon.err mount_root: failed to sync jffs2 overlay
Thu Apr 27 20:30:35 2023 daemon.info procd: - init complete -
Thu Apr 27 20:30:36 2023 daemon.info urandom_seed[2250]: Seed saved (/etc/urandom.seed)
Cualquier cosa que me pidas, lo ejecuto y te pongo salida ...

Gracias.

PD: Y otro misterio es por qué el firmware oficial de Jazztel me hace boot loop  ???
« Última modificación: 08-06-2023, 20:02 (Jueves) por peperfus »
En línea

Desconectado Tki2000

  • Moderador
  • *
  • Mensajes: 2247
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #268 en: 08-06-2023, 20:44 (Jueves) »
Pon la salida de dmesg en lugar de logread.

¿Has probado con firmwares alternativos a ver si arreglan algo?
En la página oficial de OpenWrt hay un firmware para Netcomm que se supone es compatible. ¿Has probado?
El equipo es parecido al AR-5387u. ¿Has probado algún firmware del AR-5387u?

Buceando por ahí he encontrado un firmware "AR-5382u-A731-406CTL-T01_R08.bin", pero no sé si funcionará o solucionará algo. Puede que corrija algo en la NVRAM.

No se me ocurre mucho más.
En línea

Desconectado danitool

  • ****
  • Mensajes: 78
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #269 en: 08-06-2023, 20:47 (Jueves) »
Cita de: peperfus en 08-06-2023, 19:49 (Jueves)
PD: Y otro misterio es por qué el firmware oficial de Jazztel me hace boot loop  ???

Puede que tenga quemado el wifi y en el firmware original daría un error y se reiniciaría. Mientras que OpenWrt es más modular y tolerante a errores leves por lo que sigue adelante.

De todas formas Barrier Breaker es demasiado antigua. Prueba una versión más reciente como la 19.07 ó 21.02:

https://downloads.openwrt.org/releases/21.02.7/targets/bcm63xx/generic/openwrt-21.02.7-bcm63xx-generic-comtrend_ar-5381u-squashfs-cfe.bin
https://downloads.openwrt.org/releases/19.07.9/targets/brcm63xx/generic/openwrt-19.07.9-brcm63xx-generic-AR5381u-squashfs-cfe.bin
En línea

Desconectado peperfus

  • ******
  • Mensajes: 251
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #270 en: 16-06-2023, 18:42 (Viernes) »
Hola, perdonad por la tardanza en contestar.

Llevaba tiempo fuera de casa, y al volver, he ido a encender el router.... y ni tan siquiera se enciende, los leds ni se encienden. Y esta vez estaba frío.

Creo que lo dejo ya por router físicamente roto. Me imagino que tendrá algo dañado de la placa o yoquesé.

Gracias de todas formas por el interés.
En línea

Desconectado Tki2000

  • Moderador
  • *
  • Mensajes: 2247
Re:[Desarrollo] OpenWrt en Comtrend AR-5381u
« Respuesta #271 en: 17-06-2023, 10:01 (Sábado) »
Cita de: peperfus en 16-06-2023, 18:42 (Viernes)
[...]
Y esta vez estaba frío.
[...]

Crónica de una muerte anunciada...  ;D
Mis condolencias...
En línea
Páginas: 1 ... 7 8 9 10 11 12 13 [14]   Ir Arriba
« anterior próximo »
 

Si quieres tener la mejor experiencia posible de navegación y uso de la web activa y acepta nuestras políticas de privacidad y cookies. En caso contrario te recomendamos abandonar la web y buscar la información en otro sitio. Si quieres registrarte en el foro deberás aceptar las políticas de privacidad y las condiciones de uso. Learn more