Autor Tema: Wifistation ext no me funciona en wifislax 4.0 (Solucionado) (Leído 16979 veces)

Celebii · « **en:** 25-03-2012, 06:03 (Domingo) »

Me rindo creo que he probado todos los módulos menos el que hace funcionar wifistation ext en wifislax. He probado con el modulo de la wifistation planar con el modulo que hace funcionar la wifistation en wifiway 2.0 (despues de pasarlo a xzm) he probado el que desbloquea los canales 12 y 13 y alguno mas que me he encontrado...

tambien probe a actualizar el kernel pero no me iniciaba asi que sigo con la version que wifislax trae por defecto y ya no se que hacer me he visto un par de temas relacionados y no soy capaz

alguien me puede echar una mano?

La tarjeta que me viene con el ordenador es la broadcom 4313 por eso me compre la wifistation para poder aprender a auditar y eso pero ahora mismo no puedo hacer nada por favor necesito ayuda!!

Gracias de ante mano
Saludos!!

USUARIONUEVO · « **Respuesta #1 en:** 25-03-2012, 06:23 (Domingo) »

me extraña mucho por que precisamente yo tengo una.

y sin problema.

una vez arrancado el sistema desconectala y vuelevela a conectar por probar.

¿¿ como la tienes instalada ??, me refiero a si le has puesto cable usb extra o algo.

cuando haces iwconfig que aparece en la konsola ?
dmesg ?? --->> este podria indicar si tienes algun problema
lsusb ??

Celebii · « **Respuesta #2 en:** 25-03-2012, 16:46 (Domingo) »

La tengo normal con el cable que viene de 3 o 4 metros usb enchufado al ordenador y al adaptador después le tengo puesto el pigtail de 1'5m (hasta que encuentre otro mas corto por eso de la perdida) a la antena interline de 14dbi ahora mismo voy a poner esos comando a ver que pasa y con lo que sea lo pongo aquí en este tema

Celebii · « **Respuesta #3 en:** 25-03-2012, 17:37 (Domingo) »

Resultado de iwconfig

Citar

Resultado de lsusb

Citar

Resultado de airmon-ng

Citar

Modulos metidos

Citar

El comando dmseg daba un código muy largo :S
una pregunta wifislax ya viene de serie con los drivers necesario para wifistation ext? o hay que añadírselos a parte? es que yo no se si los módulos que le he metido son los necesarios

sanson · « **Respuesta #4 en:** 25-03-2012, 18:54 (Domingo) »

Hola

De serie trae todo lo necesario para que funcione el ar9271 es raro por que si que te detecta la comexion al puerto pero luego no.

Saludos

si sale este mensaje, es que estoy en el movil

Celebii · « **Respuesta #5 en:** 25-03-2012, 19:59 (Domingo) »

El caso es que con el comando lsusb me lo reconoce pero despues no puedo utilizar el adaptador

hay algo que pueda hacer? con wifiway me funcionaria? como ya he dicho mi tarjeta de red es una broadcom 4313 inutil para auditar y sin la wifistation wifislax solo me serviria para escuchar musica y poco mas :S

sanson · « **Respuesta #6 en:** 25-03-2012, 21:12 (Domingo) »

Hola

Te tiene que funcionar si o si con wifiway y wifislax no te preocupes que tendra solucion.

Has comprobado que la descarga sea correcta (MD5 del archivo)

la has probado en live cd?
Los ha hecho con otro usb?

Son cosas que tienes que ver para ir descartando antes de ponerte con tema de drivers y demas cosas que en un principio no son necesarias.

Saludos

si sale este mensaje, es que estoy en el movil

Chumpy · « **Respuesta #7 en:** 25-03-2012, 21:37 (Domingo) »

Cita de: USUARIONUEVO en 25-03-2012, 06:23 (Domingo)

una vez arrancado el sistema desconectala y vuelevela a conectar por probar.

Has hecho eso que decía USUARIONUEVO???

Además de lo que dice Sanson, si no da resultado prueba primero sin ningún módulo.

Celebii · « **Respuesta #8 en:** 25-03-2012, 21:45 (Domingo) »

Ahora mismo voy a grabar el wifislax en un cd
el md5 lo comprobe y era identico
y solo lo he echo con un usb no he probado con otro distinto probare a ver
y sobre lo que dijo USUARIONUEVO encendi el pc con la wifistation conectada y cuando probe los comandos de iwconfig y airmon-ng la desconecte y volvi a conectar

Voy a comprobar de nuevo paso a paso desde 0

sanson · « **Respuesta #9 en:** 25-03-2012, 22:05 (Domingo) »

Hola

No metas el modulo de compat wireless prueba con la iso en limpio

Saludos

si sale este mensaje, es que estoy en el movil

USUARIONUEVO · « **Respuesta #10 en:** 25-03-2012, 22:16 (Domingo) »

heeeeeeee

pero que hace ese modulo de zz-compat-wireless hay

??

ademas pregunto , el ordenador trae puertos usb 3.0 ¿?

prueba en todos los puertos , ...me compre un portatil y trae usb 3.0 y vaya miiiierdddd <xxx

las tarjetas usb de alta potencia al requerir mas energia no funcionan , ... sin embargo en uno d elos puertos funcionan bien , ( supongo este sera solo usb 2.0 ).

prueba de quitar ese modulo de zz-compat

y despues si sigue igual prueba en otros puertos usb ...

aun a malas en otro pc.

tiene que ir ,por que casi todo el staff , tenemos esa tarjeta.
y esta probada mas que de sobras.

Celebii · « **Respuesta #11 en:** 25-03-2012, 22:58 (Domingo) »

Os comento que he probado grabandolo en un cd y no me va haciendo eso ya esta echo lo de quedar limpios de modulos que no viene de serie lo que si tienes razon usuarionuevo es que tengo usb 3.0 tengo dos puertos 2.0 y dos puertos 3.0 ahora lo que no se cual es cual xD supongo que donde esta el adaptador es el 3.0 asique lo enchufare en el otro par xD

USUARIONUEVO · « **Respuesta #12 en:** 25-03-2012, 23:12 (Domingo) »

Cita de: Celebii en 25-03-2012, 22:58 (Domingo)

Os comento que he probado grabandolo en un cd y no me va haciendo eso ya esta echo lo de quedar limpios de modulos que no viene de serie lo que si tienes razon usuarionuevo es que tengo usb 3.0 tengo dos puertos 2.0 y dos puertos 3.0 ahora lo que no se cual es cual xD supongo que donde esta el adaptador es el 3.0 asique lo enchufare en el otro par xD

esque a mi me esta pasando lo mismo en el portatil nuevo con los puertos 3.0

asi que prueba en otro puerto , los adaptadores que no reqwuieren mucha alimentacion si que van bien en los 3.0

Celebii · « **Respuesta #13 en:** 26-03-2012, 02:32 (Lunes) »

Tema solucionado!! Era problema de los puerto usb cambie el adaptador de puerto y ya me funciona perfectamente escanea hasta el canal 13 y mas de 600 datas/seg habia leido por ahi que no pasaban de 400 supongo que lo habreis arreglado.

Ahora solo me falta meterle modulos como el de ati muchas gracias a los que habeis aportado posibles soluciones

USUARIONUEVO · « **Respuesta #14 en:** 26-03-2012, 03:08 (Lunes) »

si no es mucho pedir ya que tienes una broadcom..

nada mas arrancar sistema en una consola, escribe

dmesg

eso dara una especie d elog de arranque...

o si quieres antes haz

modprobe b43

y despues el dmesg

para ver el por que no carga el broadcom.

Celebii · « **Respuesta #15 en:** 26-03-2012, 03:29 (Lunes) »

vale mañana lo hago por la tarde lo hago que dentro de 4h curro y todavia no he dormido el resultado de esos dos comandos lo pongo en este tema o te lo envio por privado?

USUARIONUEVO · « **Respuesta #16 en:** 26-03-2012, 09:17 (Lunes) »

aqui mismo ,

es por ver si el firmware esta fallando.

Celebii · « **Respuesta #17 en:** 26-03-2012, 21:22 (Lunes) »

Citar

wifislax ~ # dmesg
[irq 12]
[ 0.878481] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.878584] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.878586] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.878588] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.878589] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.878591] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.878593] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.878595] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.878597] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.878598] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.878600] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[ 0.878664] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.878731] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.878796] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.878876] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.878942] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.879006] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.879072] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.879137] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.879203] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.879268] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.879334] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.880407] pnp 00:0b: [irq 23]
[ 0.880474] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.880495] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 0.880497] pnp 00:0c: [mem 0x40000000-0x401fffff]
[ 0.880573] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.880678] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.880744] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.880762] pnp: PnP ACPI: found 13 devices
[ 0.880843] ACPI: ACPI bus type pnp unregistered
[ 0.880906] PnPBIOS: Disabled by ACPI PNP
[ 0.918800] bcma-pci-bridge 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.918887] bcma-pci-bridge 0000:0d:00.0: setting latency timer to 64
[ 0.918937] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 0.919040] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 0.919179] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 0.928973] bcma: Bus registered
[ 0.929073] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.929155] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.929237] PCI: max bus depth: 1 pci_try_num: 2
[ 0.929277] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref]
[ 0.929355] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.929418] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.929483] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
[ 0.929549] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.929630] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[ 0.929693] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.929767] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
[ 0.929835] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.929918] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[ 0.929982] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.930049] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
[ 0.930117] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.930202] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref]
[ 0.930279] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[ 0.930343] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.930410] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
[ 0.930478] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.930562] pci 0000:00:1c.3: PCI bridge to [bus 19-19]
[ 0.930628] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
[ 0.930709] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.930786] pci 0000:00:01.0: setting latency timer to 64
[ 0.930793] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.930860] pci 0000:00:1c.0: setting latency timer to 64
[ 0.930867] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.930935] pci 0000:00:1c.1: setting latency timer to 64
[ 0.930945] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.931013] pci 0000:00:1c.2: setting latency timer to 64
[ 0.931023] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.931091] pci 0000:00:1c.3: setting latency timer to 64
[ 0.931095] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.931097] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.931099] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.931101] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.931103] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.931105] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff]
[ 0.931107] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.931110] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.931111] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff]
[ 0.931113] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.931115] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.931117] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff]
[ 0.931119] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.931121] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff]
[ 0.931123] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff]
[ 0.931125] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.931128] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff]
[ 0.931146] NET: Registered protocol family 2
[ 0.931228] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.931349] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.931646] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.931816] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.931881] TCP reno registered
[ 0.931940] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.932005] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.932115] NET: Registered protocol family 1
[ 0.932184] pci 0000:00:02.0: Boot video device
[ 0.976383] PCI: CLS 64 bytes, default 64
[ 0.976415] Trying to unpack rootfs image as initramfs...
[ 0.977198] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.978139] Freeing initrd memory: 2028k freed
[ 0.978384] Simple Boot Flag at 0x44 set to 0x1
[ 0.980115] audit: initializing netlink socket (disabled)
[ 0.980184] type=2000 audit(1332796293.729:1): initialized
[ 0.984004] highmem bounce pool size: 64 pages
[ 0.994059] VFS: Disk quotas dquot_6.5.2
[ 0.994197] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.995032] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.995227] fuse init (API version 7.17)
[ 0.995468] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.996023] SGI XFS Quota Management subsystem
[ 0.996232] aufs 3.1-20111114
[ 0.996294] msgmni has been set to 1720
[ 0.996463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.996556] io scheduler noop registered
[ 0.996630] io scheduler cfq registered (default)
[ 0.996910] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.996938] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.997514] intel_idle: MWAIT substates: 0x21120
[ 0.997516] intel_idle: v0.4 model 0x2A
[ 0.997518] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.997736] isapnp: Scanning for PnP cards...
[ 1.355707] isapnp: No Plug & Play device found
[ 1.383696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.462244] brd: module loaded
[ 1.495871] loop: module loaded
[ 1.496429] ahci 0000:00:1f.2: version 3.0
[ 1.496442] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.496551] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.507156] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[ 1.507272] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.507354] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.509965] scsi0 : ahci
[ 1.510137] scsi1 : ahci
[ 1.510280] scsi2 : ahci
[ 1.510424] scsi3 : ahci
[ 1.510565] scsi4 : ahci
[ 1.510706] scsi5 : ahci
[ 1.510890] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 41
[ 1.510970] ata2: DUMMY
[ 1.511027] ata3: DUMMY
[ 1.511083] ata4: DUMMY
[ 1.511154] ata5: DUMMY
[ 1.511212] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 41
[ 1.513795] scsi6 : pata_legacy
[ 1.513927] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 1.815806] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.816280] ata6.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100
[ 1.817598] ata6.00: configured for UDMA/100
[ 1.818805] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.819239] ata1.00: ATA-8: TOSHIBA MK1059GSM, GL002C, max UDMA/100
[ 1.819338] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.819792] ata1.00: configured for UDMA/100
[ 1.819991] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1059GS GL00 PQ: 0 ANSI: 5
[ 1.820249] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.820347] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.820457] sd 0:0:0:0: [sda] Write Protect is off
[ 1.820518] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.820532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.822282] scsi 5:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5
[ 1.827906] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.828029] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.828245] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.978646] Refined TSC clocksource calibration: 2195.012 MHz.
[ 1.978746] Switching to clocksource tsc
[ 2.260176] sda: sda1 sda2 sda3 < sda5 >
[ 2.260649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.261156] scsi7 : pata_legacy
[ 2.261277] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 2.412474] Fusion MPT base driver 3.04.19
[ 2.412536] Copyright (c) 1999-2008 LSI Corporation
[ 2.412601] Fusion MPT SPI Host driver 3.04.19
[ 2.412697] Fusion MPT FC Host driver 3.04.19
[ 2.412792] Fusion MPT SAS Host driver 3.04.19
[ 2.412924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.413003] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.413080] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.413084] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.413153] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.413252] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.417197] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.417211] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000
[ 2.427115] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.427372] hub 1-0:1.0: USB hub found
[ 2.427436] hub 1-0:1.0: 2 ports detected
[ 2.427557] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.427632] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.427636] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.427700] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.427799] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.431737] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.431750] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000
[ 2.441099] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.441341] hub 2-0:1.0: USB hub found
[ 2.441403] hub 2-0:1.0: 2 ports detected
[ 2.441531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.441628] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.441754] xhci_hcd 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.441834] xhci_hcd 0000:19:00.0: setting latency timer to 64
[ 2.441839] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 2.441904] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
[ 2.442181] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000
[ 2.442347] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
[ 2.442356] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
[ 2.442365] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
[ 2.442374] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
[ 2.442383] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
[ 2.442392] xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
[ 2.442401] xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
[ 2.442410] xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
[ 2.442648] xHCI xhci_add_endpoint called for root hub
[ 2.442650] xHCI xhci_check_bandwidth called for root hub
[ 2.442691] hub 3-0:1.0: USB hub found
[ 2.442759] hub 3-0:1.0: 2 ports detected
[ 2.442865] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 2.442930] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4
[ 2.445664] xHCI xhci_add_endpoint called for root hub
[ 2.445666] xHCI xhci_check_bandwidth called for root hub
[ 2.445707] hub 4-0:1.0: USB hub found
[ 2.445775] hub 4-0:1.0: 2 ports detected
[ 2.445932] usbcore: registered new interface driver uas
[ 2.445995] Initializing USB Mass Storage driver...
[ 2.446102] usbcore: registered new interface driver usb-storage
[ 2.446167] USB Mass Storage support registered.
[ 2.446255] usbcore: registered new interface driver ums-alauda
[ 2.446344] usbcore: registered new interface driver ums-cypress
[ 2.446436] usbcore: registered new interface driver ums-datafab
[ 2.446526] usbcore: registered new interface driver ums-freecom
[ 2.446617] usbcore: registered new interface driver ums-isd200
[ 2.446707] usbcore: registered new interface driver ums-jumpshot
[ 2.446797] usbcore: registered new interface driver ums-karma
[ 2.446887] usbcore: registered new interface driver ums-onetouch
[ 2.446978] usbcore: registered new interface driver ums-sddr09
[ 2.447068] usbcore: registered new interface driver ums-sddr55
[ 2.447161] usbcore: registered new interface driver ums-usbat
[ 2.447305] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.454440] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.454526] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.454808] device-mapper: uevent: version 1.0.3
[ 2.454991] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 2.455213] EISA: Probing bus 0 at eisa.0
[ 2.455276] EISA: Cannot allocate resource for mainboard
[ 2.455338] Cannot allocate resource for EISA slot 1
[ 2.455400] Cannot allocate resource for EISA slot 2
[ 2.455461] Cannot allocate resource for EISA slot 3
[ 2.455522] Cannot allocate resource for EISA slot 4
[ 2.455584] Cannot allocate resource for EISA slot 5
[ 2.455646] Cannot allocate resource for EISA slot 6
[ 2.455707] Cannot allocate resource for EISA slot 7
[ 2.455768] Cannot allocate resource for EISA slot 8
[ 2.455829] EISA: Detected 0 cards.
[ 2.456785] cpuidle: using governor ladder
[ 2.458534] cpuidle: using governor menu
[ 2.458698] usbcore: registered new interface driver usbhid
[ 2.458760] usbhid: USB HID core driver
[ 2.458869] TCP cubic registered
[ 2.458911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.459014] NET: Registered protocol family 17
[ 2.459084] Registering the dns_resolver key type
[ 2.459160] Using IPI No-Shortcut mode
[ 2.459364] registered taskstats version 1
[ 2.463513] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.463878] md: Waiting for all devices to be available before autodetect
[ 2.463943] md: If you don't use raid, use raid=noautodetect
[ 2.464346] md: Autodetecting RAID arrays.
[ 2.464407] md: Scanned 0 and added 0 devices.
[ 2.464467] md: autorun ...
[ 2.464524] md: ... autorun DONE.
[ 2.464603] RAMDISK: xz image found at block 0
[ 2.728792] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.753043] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[ 2.753248] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[ 2.753320] VFS: Mounted root (ext4 filesystem) on device 1:0.
[ 2.753481] Freeing unused kernel memory: 468k freed
[ 2.753604] BFS CPU scheduler v0.415 by Con Kolivas.
[ 2.843325] hub 1-1:1.0: USB hub found
[ 2.843476] hub 1-1:1.0: 6 ports detected
[ 2.945542] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 3.060364] hub 2-1:1.0: USB hub found
[ 3.060515] hub 2-1:1.0: 6 ports detected
[ 3.163357] usb 3-1: new full speed USB device number 2 using xhci_hcd
[ 3.295816] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 3.297821] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 3.299817] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 3.347801] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 3.410634] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 3.515979] usb 3-2: new low speed USB device number 3 using xhci_hcd
[ 3.548644] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 3.554648] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 3.555991] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.570832] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1c.3/0000:19:00.0/usb3/3-2/3-2:1.0/input/input1
[ 3.570942] generic-usb 0003:1267:0201.0001: input,hidraw0: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:19:00.0-2/input0
[ 3.634011] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
[ 3.735372] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3.772512] ISO 9660 Extensions: RRIP_1991A
[ 3.793699] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[ 3.980473] usb 2-1.1: new high speed USB device number 3 using ehci_hcd
[ 11.832970] udev[2433]: starting version 165
[ 19.201842] cfg80211: Calling CRDA to update world regulatory domain
[ 21.460293] cfg80211: World regulatory domain updated:
[ 21.460297] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.460300] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[ 22.000862] Bluetooth: Core ver 2.16
[ 22.000883] NET: Registered protocol family 31
[ 22.000886] Bluetooth: HCI device and connection manager initialized
[ 22.000889] Bluetooth: HCI socket layer initialized
[ 22.000891] Bluetooth: L2CAP socket layer initialized
[ 22.000896] Bluetooth: SCO socket layer initialized
[ 22.913279] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.913359] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 23.810799] mousedev: PS/2 mouse device common for all mice
[ 24.307319] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 24.307328] Linux agpgart interface v0.103
[ 26.507066] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 26.507335] Initializing Realtek PCIE storage driver...
[ 26.507378] rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 26.507412] Resource length: 0x1000
[ 26.507425] Original address: 0xc3501000, remapped address: 0xf8ad0000
[ 26.507429] pci->irq = 18
[ 26.507432] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 26.507462] rts_pstor 0000:13:00.0: setting latency timer to 64
[ 26.707619] scsi8 : SCSI emulation for PCI-Express Mass Storage devices
[ 26.707701] rts_pstor: waiting for device to settle before scanning
[ 27.278384] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input2
[ 27.279645] ACPI: Lid Switch [LID]
[ 27.279705] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 27.279760] ACPI: Power Button [PWRB]
[ 27.279824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 27.279871] ACPI: Power Button [PWRF]
[ 27.386400] wmi: Mapper loaded
[ 27.516323] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 27.516350] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 27.516390] r8169 0000:07:00.0: setting latency timer to 64
[ 27.516482] r8169 0000:07:00.0: irq 50 for MSI/MSI-X
[ 27.516626] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xf8c30000, 2c:41:38:5e:7f:76, XID 0c900800 IRQ 50
[ 27.706535] scsi 8:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 27.706788] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 27.706948] Bad LUN (0:1)
[ 27.707014] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 27.707061] Bad target number (1:0)
[ 27.707142] Bad target number (2:0)
[ 27.707219] Bad target number (3:0)
[ 27.707292] Bad target number (4:0)
[ 27.707372] Bad target number (5:0)
[ 27.707461] Bad target number (6:0)
[ 27.707596] Bad target number (7:0)
[ 27.707638] rts_pstor: device scan complete
[ 29.040795] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 29.127102] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 29.128157] ACPI: AC Adapter [AC] (on-line)
[ 29.130447] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 29.130456] ACPI: Battery Slot [BAT0] (battery absent)
[ 29.167673] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 29.167735] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 29.168951] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 29.169330] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 29.283112] rtc_cmos 00:06: RTC can wake from S4
[ 29.283260] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 29.283292] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 29.358969] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 29.359025] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 29.359052] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 30.200930] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 30.256807] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 30.285513] Linux media interface: v0.10
[ 30.450552] sdhci: Secure Digital Host Controller Interface driver
[ 30.450555] sdhci: Copyright(c) Pierre Ossman
[ 30.482546] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 30.484286] hp_accel: laptop model unknown, using default axes configuration
[ 30.484292] sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
[ 30.484314] sdhci-pci 0000:13:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 30.484338] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 30.484348] sdhci-pci 0000:13:00.1: setting latency timer to 64
[ 30.484367] mmc0: no vmmc regulator found
[ 30.484404] Registered led device: mmc0::
[ 30.484506] mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA
[ 30.527752] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[ 30.568219] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
[ 30.568225] b43: probe of bcma0:0 failed with error -95
[ 30.568249] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[ 30.673394] [drm] Initialized drm 1.1.0 20060810
[ 30.697284] lis3lv02d: 8 bits 3DC sensor found
[ 30.713124] Linux video capture interface: v2.00
[ 30.802182] ACPI: acpi_idle yielding to intel_idle
[ 30.815157] thermal LNXTHERM:00: registered as thermal_zone0
[ 30.815160] ACPI: Thermal Zone [THRM] (62 C)
[ 31.338465] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 31.338666] Registered led device: hp::hddprotect
[ 31.338681] hp_accel: driver loaded
[ 31.418109] usb 2-1.1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 31.652626] ath9k_htc 2-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 31.686381] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:d281)
[ 31.689467] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
[ 31.689549] usbcore: registered new interface driver uvcvideo
[ 31.689552] USB Video Class driver (1.1.1)
[ 31.689570] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 31.692605] input: HDA Intel PCH Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 31.692716] input: HDA Intel PCH HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 31.692958] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 31.736834] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 31.736840] i915 0000:00:02.0: setting latency timer to 64
[ 31.748437] mtrr: no more MTRRs available
[ 31.748439] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 31.748660] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 31.748665] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 31.748666] [drm] Driver supports precise vblank timestamp query.
[ 31.749954] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 31.749957] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 31.839811] ath9k_htc 2-1.1:1.0: ath9k_htc: FW Version: 1.3
[ 31.839819] ath: EEPROM regdomain: 0x0
[ 31.839824] ath: EEPROM indicates default country code should be used
[ 31.839828] ath: doing EEPROM country->regdmn map search
[ 31.839833] ath: country maps to regdmn code: 0x3a
[ 31.839838] ath: Country alpha2 being used: US
[ 31.839841] ath: Regpair used: 0x3a
[ 31.842347] cfg80211: Calling CRDA for country: US
[ 31.842357] ieee80211 phy1: Atheros AR9271 Rev:1
[ 31.843195] Registered led device: ath9k_htc-phy1
[ 31.843199] usb 2-1.1: ath9k_htc: USB layer initialized
[ 31.843220] usbcore: registered new interface driver ath9k_htc
[ 31.845593] cfg80211: Regulatory domain changed to country: US
[ 31.845596] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 31.845599] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[ 32.185595] fbcon: inteldrmfb (fb0) is primary device
[ 32.365253] padlock_aes: VIA PadLock not detected.
[ 32.367021] [drm] radeon defaulting to kernel modesetting.
[ 32.367023] [drm] radeon kernel modesetting enabled.
[ 32.367036] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 32.375533] usbcore: registered new interface driver btusb
[ 32.478961] Console: switching to colour frame buffer device 170x48
[ 32.482700] fb0: inteldrmfb frame buffer device
[ 32.482701] drm: registered panic notifier
[ 32.482727] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 32.482735] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.482741] radeon 0000:01:00.0: setting latency timer to 64
[ 32.482873] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 32.602125] acpi device:2f: registered as cooling_device8
[ 32.602401] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input12
[ 32.602490] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 32.709706] acpi device:3c: registered as cooling_device9
[ 32.709993] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 32.710067] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 32.710123] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 32.710355] [drm] initializing kernel modesetting (TURKS 0x1002:0x6740 0x103C:0x3388).
[ 32.710389] [drm] register mmio base: 0xC6500000
[ 32.710390] [drm] register mmio size: 131072
[ 32.710392] vga_switcheroo: enabled
[ 32.710532] radeon atpx: version is 1
[ 35.153151] ATOM BIOS: HP/Flex
[ 35.153191] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 35.153194] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 35.153202] mtrr: no more MTRRs available
[ 35.153204] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 35.153206] [drm] RAM width 128bits DDR
[ 35.153249] [TTM] Zone kernel: Available graphics memory: 440668 kiB.
[ 35.153251] [TTM] Zone highmem: Available graphics memory: 1271264 kiB.
[ 35.153252] [TTM] Initializing pool allocator.
[ 35.153269] [drm] radeon: 2048M of VRAM memory ready
[ 35.153271] [drm] radeon: 512M of GTT memory ready.
[ 35.153285] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 35.153287] [drm] Driver supports precise vblank timestamp query.
[ 35.153338] radeon 0000:01:00.0: irq 53 for MSI/MSI-X
[ 35.153345] radeon 0000:01:00.0: radeon: using MSI.
[ 35.153406] [drm] radeon: irq initialized.
[ 35.153410] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 35.153673] [drm] Loading TURKS Microcode
[ 35.537001] radeon 0000:01:00.0: WB enabled
[ 35.553470] [drm] ring test succeeded in 3 usecs
[ 35.553592] [drm] radeon: ib pool ready.
[ 35.553674] [drm] ib test succeeded in 0 usecs
[ 35.553816] [drm] Radeon Display Connectors
[ 35.553833] [drm] Internal thermal controller with fan control
[ 35.554969] [drm] radeon: power management initialized
[ 35.555174] No connectors reported connected with modes
[ 35.555176] [drm] Cannot find any crtc or sizes - going 1024x768
[ 35.556493] [drm] fb mappable at 0xA0141000
[ 35.556494] [drm] vram apper at 0xA0000000
[ 35.556496] [drm] size 3145728
[ 35.556497] [drm] fb depth is 24
[ 35.556498] [drm] pitch is 4096
[ 35.556577] fb1: radeondrmfb frame buffer device
[ 35.556581] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 1
[ 58.110406] NET: Registered protocol family 10
[ 65.398384] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 70.245442] r8169 0000:07:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[ 70.251508] r8169 0000:07:00.0: eth0: link down
[ 70.251690] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 79.633510] start_kdeinit (3867): /proc/3867/oom_adj is deprecated, please use /proc/3867/oom_score_adj instead.
wifislax ~ #

Decir que el comando modprobe b43 lo introduje pero no salio nada $:-\$
Si puedo hacer algo mas por ayudaraos decirme lo que sea

USUARIONUEVO · « **Respuesta #18 en:** 26-03-2012, 23:06 (Lunes) »

y aqui lo que necesitaba ,para buscar info ,parece que driver y firmware estan ok , pero esa tarjeta en concreto pone no soportada.

Código: [Seleccionar]

[   30.527752] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[   30.568219] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
[   30.568225] b43: probe of bcma0:0 failed with error -95
[   30.568249] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]

Noticias:

Autor Tema: Wifistation ext no me funciona en wifislax 4.0 (Solucionado) (Leído 16979 veces)

Celebii

Wifistation ext no me funciona en wifislax 4.0 (Solucionado)

USUARIONUEVO

Re: Wifistation ext no me funciona en wifislax 4.0

Celebii

Re: Wifistation ext no me funciona en wifislax 4.0

Celebii

Re: Wifistation ext no me funciona en wifislax 4.0

sanson

Re: Re: Wifistation ext no me funciona en wifislax 4.0

Celebii

Re: Wifistation ext no me funciona en wifislax 4.0

sanson

Re: Re: Wifistation ext no me funciona en wifislax 4.0

Chumpy

Re: Wifistation ext no me funciona en wifislax 4.0

Celebii

Re: Wifistation ext no me funciona en wifislax 4.0

sanson

Re: Re: Wifistation ext no me funciona en wifislax 4.0

USUARIONUEVO

Re: Wifistation ext no me funciona en wifislax 4.0

Celebii

Re: Wifistation ext no me funciona en wifislax 4.0

USUARIONUEVO

Re: Wifistation ext no me funciona en wifislax 4.0

Celebii

Re: Wifistation ext no me funciona en wifislax 4.0

USUARIONUEVO

Re: Wifistation ext no me funciona en wifislax 4.0

Celebii

Re: Wifistation ext no me funciona en wifislax 4.0

USUARIONUEVO

Re: Wifistation ext no me funciona en wifislax 4.0

Celebii

Re: Wifistation ext no me funciona en wifislax 4.0

USUARIONUEVO

Re: Wifistation ext no me funciona en wifislax 4.0