hola pepe10000 te refieres a esto:
undermonster wrote:
I Unbricked my WR841N v8.2 - without hardware hacks.
I will explain how to revert to STOCK firmware.
Must Understand!!!
You cannot copy a file over Telnet with ease.
I installed xampp on my PC, and then put the factory .bin in the htdocs folder.
Use google to find the location of the HTDOCS folder for your OS.
Windows is: C:\xampp\htdocs\
Then I started the apache service.
This allowed me to transfer the file via HTTP, or more specifically using the command wget.
Getting the router Ready
1) Connect ETHERNET cable to your router, in the WAN port (blue)
2) Turn Router ON. Press the WPS/Reset button many times.
3) Wait for LED under gear icon to flash rapidly.
Your router is in Recovery Mode now.
Connecting to the router via telnet
1) Set your Computer IP to 192.168.1.2 (Ethernet, not WiFi)
2) Open CMD/Terminal
3) Type: ping 192.168.1.1
4) Wait for PING to respond (Not failed response). Cancel pinging (CTRL + C)
5) Type: telnet 192.168.1.1
6) openWRT in Recovery Mode does not require username/password!
You are now accessing the router via telnet.
Transferring stock firmware to the router
You should be connected in a telnet session now!
Assuming you have set up xampp on your PC!
1) Type: cd /tmp
2) Type: wget
http://192.168.1.2/wr841nv8_en_3_13_18_up(120522).bin 3) Type: mv wr841nv8_en_3_13_18_up(120522).bin tplink.bin
You have now transferred the stock firmware to the router.
Flashing the router with the firmware
1) Type: mtd -r write /tmp/tplink.bin firmware
2) Wait for "Reboot" message. If error message appears, manually reboot.
You are now using stock firmware.
Your router is now back to Factory Defaults.
Disconnect the ethernet cable from WAN and insert to LAN-1.
Set your PC to assign IP via DHCP.
es que no entiendo no hay un manual en español, no se por donde empezar.
