Me parece poco serio aventurar juicios sobre la personalidad de los demas.
yo he expuesto una cuestion a la que nadie ha contestado. supongo que por no haberla leido. o por no saber la solucion.
Cuando he solventado la duda; he dado por finalizado el tema. y he indicado que hay una solucion.
Si a alguien le sucede algo similar y utiliza el buscador siempre puede abrir el tema y encantado compartire lo que a mi me lo soluciono.
Tengo que dar las gracias al moderador por contestar a mi mensaje sugeriendo una solucion. aunque en este caso no se queda trabado en udev sino que continua pero dando error en la carga de las unidades usb.
adjunto volcado dmesg
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] e820: [mem 0x1c000000-0xfffeffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @dbba6000 s26496 r0 d22656 u49152
[ 0.000000] pcpu-alloc: s26496 r0 d22656 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113663
[ 0.000000] Kernel command line: quiet initrd=/multislack/wifislax4.4/boot/initrd.xz vga=788 noload=013-W;000-PAE;004- autoexec=vesa-mode;startx root=/dev/ram0 rw ramdisk_size=6666 noauto BOOT_IMAGE=/multislack/wifislax4.4/boot/vmlinuz
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 447176k/458688k available (3611k kernel code, 11060k reserved, 1395k data, 456k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdc7f0000 - 0xff7fe000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB)
[ 0.000000] .init : 0xc14e4000 - 0xc1556000 ( 456 kB)
[ 0.000000] .data : 0xc1386d38 - 0xc14e3bc0 (1395 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1386d38 (3611 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=db406000 soft=db408000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 932.924 MHz processor
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1865.84 BogoMIPS (lpj=932924)
[ 0.001021] pid_max: default: 32768 minimum: 301
[ 0.002104] Mount-cache hash table entries: 512
[ 0.003071] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.003071] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.003071] tlb_flushall_shift: -1
[ 0.006589] Freeing SMP alternatives: 12k freed
[ 0.006624] ACPI: Core revision 20120913
[ 0.012939] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.013175] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.013184] smpboot: SMP motherboard not detected
[ 0.013192] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.013199] smpboot: SMP disabled
[ 0.013207] Performance Events:
[ 0.019151] Brought up 1 CPUs
[ 0.019165] smpboot: Total of 1 processors activated (1865.84 BogoMIPS)
[ 0.019762] devtmpfs: initialized
[ 0.021350] NET: Registered protocol family 16
[ 0.022981] EISA bus registered
[ 0.023372] ACPI: bus type pci registered
[ 0.043284] PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
[ 0.043294] PCI: Using configuration type 1 for base access
[ 0.071554] bio: create slab <bio-0> at 0
[ 0.072179] ACPI: Added _OSI(Module Device)
[ 0.072191] ACPI: Added _OSI(Processor Device)
[ 0.072200] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072210] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.074402] ACPI: EC: Look up EC in DSDT
[ 0.084620] ACPI: Interpreter enabled
[ 0.084633] ACPI: (supports S0 S5)
[ 0.084662] ACPI: Using PIC for interrupt routing
[ 0.103178] ACPI: No dock devices found.
[ 0.103202] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.103461] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.103753] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.103769] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.103784] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.103800] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.103816] pci_root PNP0A03:00: host bridge window [mem 0x1c000000-0xffefffff] (ignored)
[ 0.103826] PCI: root bus 00: using default resources
[ 0.103843] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.104217] PCI host bridge to bus 0000:00
[ 0.104238] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.104253] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.104268] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.104322] pci 0000:00:00.0: [1106:3123] type 00 class 0x060000
[ 0.104353] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.104493] pci 0000:00:01.0: [1106:b091] type 01 class 0x060400
[ 0.104574] pci 0000:00:01.0: supports D1
[ 0.104641] pci 0000:00:0d.0: [1106:3044] type 00 class 0x0c0010
[ 0.104676] pci 0000:00:0d.0: reg 10: [mem 0xd6000000-0xd60007ff]
[ 0.104701] pci 0000:00:0d.0: reg 14: [io 0xd000-0xd07f]
[ 0.104798] pci 0000:00:0d.0: supports D2
[ 0.104813] pci 0000:00:0d.0: PME# supported from D2 D3hot D3cold
[ 0.104869] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.104940] pci 0000:00:10.0: reg 20: [io 0xd400-0xd41f]
[ 0.105070] pci 0000:00:10.0: supports D1 D2
[ 0.105084] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105138] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.105209] pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
[ 0.105275] pci 0000:00:10.1: supports D1 D2
[ 0.105289] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105342] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.105412] pci 0000:00:10.2: reg 20: [io 0xdc00-0xdc1f]
[ 0.105479] pci 0000:00:10.2: supports D1 D2
[ 0.105492] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105553] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
[ 0.105588] pci 0000:00:10.3: reg 10: [mem 0xd6001000-0xd60010ff]
[ 0.105692] pci 0000:00:10.3: supports D1 D2
[ 0.105705] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105765] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
[ 0.105852] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.105876] pci 0000:00:11.0: quirk: [io 0x0400-0x047f] claimed by vt8235 PM
[ 0.105894] pci 0000:00:11.0: quirk: [io 0x0500-0x050f] claimed by vt8235 SMB
[ 0.105975] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
[ 0.106072] pci 0000:00:11.1: reg 20: [io 0xe000-0xe00f]
[ 0.106188] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[ 0.106222] pci 0000:00:11.5: reg 10: [io 0xe400-0xe4ff]
[ 0.106329] pci 0000:00:11.5: supports D1 D2
[ 0.106441] pci 0000:01:00.0: [1106:3122] type 00 class 0x030000
[ 0.106475] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd3ffffff pref]
[ 0.106499] pci 0000:01:00.0: reg 14: [mem 0xd4000000-0xd4ffffff]
[ 0.106553] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.106603] pci 0000:01:00.0: supports D1 D2
[ 0.106664] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.106684] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.106703] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
[ 0.106724] pci_bus 0000:00: on NUMA node 0
[ 0.106743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.107501] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.107513] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.139606] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.139965] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.140375] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.140734] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.141579] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.141590] vgaarb: loaded
[ 0.141599] vgaarb: bridge control possible 0000:01:00.0
[ 0.142708] SCSI subsystem initialized
[ 0.142723] ACPI: bus type scsi registered
[ 0.143208] libata version 3.00 loaded.
[ 0.143239] ACPI: bus type usb registered
[ 0.143561] usbcore: registered new interface driver usbfs
[ 0.143725] usbcore: registered new interface driver hub
[ 0.143898] usbcore: registered new device driver usb
[ 0.144869] PCI: Using ACPI for IRQ routing
[ 0.144886] PCI: pci_cache_line_size set to 32 bytes
[ 0.145086] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.145099] e820: reserve RAM buffer [mem 0x1bff0000-0x1bffffff]
[ 0.146435] Switching to clocksource pit
[ 0.146922] pnp: PnP ACPI init
[ 0.146979] ACPI: bus type pnp registered
[ 0.147152] pnp 00:00: [mem 0x000f0000-0x000f3fff]
[ 0.147168] pnp 00:00: [mem 0x000f4000-0x000f7fff]
[ 0.147182] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.147196] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.147210] pnp 00:00: [mem 0x1bff0000-0x1bffffff]
[ 0.147225] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.147238] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.147263] pnp 00:00: [mem 0x00100000-0x1bfeffff]
[ 0.147277] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.147292] pnp 00:00: [mem 0xfff80000-0xfffeffff]
[ 0.147776] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.147796] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.147813] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.147829] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.147847] system 00:00: [mem 0x1bff0000-0x1bffffff] could not be reserved
[ 0.147864] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.147880] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.147897] system 00:00: [mem 0x00100000-0x1bfeffff] could not be reserved
[ 0.147914] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.147931] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.147951] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.148217] pnp 00:01: [bus 00-ff]
[ 0.148232] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.148246] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.148260] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.148276] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.148291] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 0.148306] pnp 00:01: [mem 0x1c000000-0xffefffff window]
[ 0.148698] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.148815] pnp 00:02: [io 0x0400-0x047f]
[ 0.148829] pnp 00:02: [io 0x0500-0x050f]
[ 0.149120] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.149137] system 00:02: [io 0x0500-0x050f] has been reserved
[ 0.149156] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.149756] pnp 00:03: [io 0x0010-0x001f]
[ 0.149771] pnp 00:03: [io 0x0022-0x003f]
[ 0.149784] pnp 00:03: [io 0x0044-0x005f]
[ 0.149797] pnp 00:03: [io 0x0062-0x0063]
[ 0.149810] pnp 00:03: [io 0x0065-0x006f]
[ 0.149824] pnp 00:03: [io 0x0074-0x007f]
[ 0.149837] pnp 00:03: [io 0x0091-0x0093]
[ 0.149860] pnp 00:03: [io 0x00a2-0x00bf]
[ 0.149874] pnp 00:03: [io 0x00e0-0x00ef]
[ 0.149887] pnp 00:03: [io 0x04d0-0x04d1]
[ 0.150257] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.150278] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.150346] pnp 00:04: [dma 4]
[ 0.150359] pnp 00:04: [io 0x0000-0x000f]
[ 0.150372] pnp 00:04: [io 0x0080-0x0090]
[ 0.150386] pnp 00:04: [io 0x0094-0x009f]
[ 0.150399] pnp 00:04: [io 0x00c0-0x00df]
[ 0.150728] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.150794] pnp 00:05: [io 0x0070-0x0073]
[ 0.150810] pnp 00:05: [irq 8]
[ 0.151038] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.151087] pnp 00:06: [io 0x0061]
[ 0.151315] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.151372] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.151386] pnp 00:07: [irq 13]
[ 0.151710] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.152173] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.152187] pnp 00:08: [io 0x03f7]
[ 0.152202] pnp 00:08: [irq 6]
[ 0.152214] pnp 00:08: [dma 2]
[ 0.152633] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.153199] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.153215] pnp 00:09: [irq 4]
[ 0.153714] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.154281] pnp 00:0a: [io 0x02f8-0x02ff]
[ 0.154296] pnp 00:0a: [irq 3]
[ 0.154776] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.155492] pnp 00:0b: [io 0x0378-0x037f]
[ 0.155508] pnp 00:0b: [irq 7]
[ 0.155970] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.156395] pnp 00:0c: [irq 12]
[ 0.156798] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.156940] pnp 00:0d: [io 0x0060]
[ 0.156953] pnp 00:0d: [io 0x0064]
[ 0.156967] pnp 00:0d: [irq 1]
[ 0.157250] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.157645] pnp: PnP ACPI: found 14 devices
[ 0.157655] ACPI: ACPI bus type pnp unregistered
[ 0.157667] PnPBIOS: Disabled by ACPI PNP
[ 0.210066] Switching to clocksource acpi_pm
[ 0.210203] pci 0000:01:00.0: BAR 6: assigned [mem 0xd5000000-0xd500ffff pref]
[ 0.210221] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.210242] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.210261] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
[ 0.210290] pci 0000:00:01.0: setting latency timer to 64
[ 0.210309] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.210324] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.210340] pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd5ffffff]
[ 0.210356] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd3ffffff pref]
[ 0.210620] NET: Registered protocol family 2
[ 0.211215] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.212138] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.213201] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.213413] TCP: reno registered
[ 0.213430] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.213505] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.213856] NET: Registered protocol family 1
[ 0.213918] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.215123] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.215134] PCI: setting IRQ 11 as level-triggered
[ 0.215856] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.215864] PCI: setting IRQ 5 as level-triggered
[ 0.216828] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.216836] PCI: setting IRQ 10 as level-triggered
[ 0.217836] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.217919] pci 0000:01:00.0: Boot video device
[ 0.217930] PCI: CLS 32 bytes, default 32
[ 0.218188] Unpacking initramfs...
[ 0.826493] Freeing initrd memory: 736k freed
[ 0.850463] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.851234] fuse init (API version 7.20)
[ 0.851927] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.854454] aufs 3.7-20130325
[ 0.854482] msgmni has been set to 874
[ 0.855509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.855523] io scheduler noop registered
[ 0.855533] io scheduler deadline registered (default)
[ 0.856708] vesafb: mode is 800x600x16, linelength=1600, pages=63
[ 0.856721] vesafb: protected mode interface info at c000:5ab8
[ 0.856732] vesafb: pmi: set display start = c00c5b09, set palette = c00c5b5e
[ 0.856739] vesafb: pmi: ports = 3b4 3b5 3d4 3d5 3cc 3d7 3d8 3d9
[ 0.856764] vesafb: scrolling: redraw
[ 0.856777] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.857417] vesafb: framebuffer at 0xd0000000, mapped to 0xdc800000, using 1875k, total 65536k
[ 0.869526] Console: switching to colour frame buffer device 100x37
[ 0.883543] fb0: VESA VGA frame buffer device
[ 0.884435] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.884457] ACPI: Power Button [PWRB]
[ 0.884908] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.884924] ACPI: Power Button [PWRF]
[ 0.885182] isapnp: Scanning for PnP cards...
[ 1.198204] isapnp: No Plug & Play device found
[ 1.205189] loop: module loaded
[ 1.215714] pata_via 0000:00:11.1: version 0.3.4
[ 1.215765] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
[ 1.218503] scsi0 : pata_via
[ 1.224216] scsi1 : pata_via
[ 1.229476] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 1.229493] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 1.231673] usbcore: registered new interface driver zd1201
[ 1.231687] Fusion MPT base driver 3.04.20
[ 1.231694] Copyright (c) 1999-2008 LSI Corporation
[ 1.231733] Fusion MPT SPI Host driver 3.04.20
[ 1.231916] Fusion MPT SAS Host driver 3.04.20
[ 1.232252] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.232500] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 1.232531] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 1.232694] ehci_hcd 0000:00:10.3: irq 11, io mem 0xd6001000
[ 1.238056] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 1.238879] hub 1-0:1.0: USB hub found
[ 1.238906] hub 1-0:1.0: 6 ports detected
[ 1.239621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.239925] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.240122] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.240162] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.240221] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
[ 1.241383] hub 2-0:1.0: USB hub found
[ 1.241412] hub 2-0:1.0: 2 ports detected
[ 1.241717] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.241744] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.241804] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000d800
[ 1.242858] hub 3-0:1.0: USB hub found
[ 1.242885] hub 3-0:1.0: 2 ports detected
[ 1.243270] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.243298] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.243359] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000dc00
[ 1.244413] hub 4-0:1.0: USB hub found
[ 1.244445] hub 4-0:1.0: 2 ports detected
[ 1.245194] Initializing USB Mass Storage driver...
[ 1.245467] usbcore: registered new interface driver usb-storage
[ 1.245475] USB Mass Storage support registered.
[ 1.245618] usbcore: registered new interface driver ums-alauda
[ 1.245757] usbcore: registered new interface driver ums-cypress
[ 1.245898] usbcore: registered new interface driver ums-datafab
[ 1.246114] usbcore: registered new interface driver ums-freecom
[ 1.246276] usbcore: registered new interface driver ums-isd200
[ 1.246416] usbcore: registered new interface driver ums-jumpshot
[ 1.246554] usbcore: registered new interface driver ums-karma
[ 1.246713] usbcore: registered new interface driver ums-onetouch
[ 1.246871] usbcore: registered new interface driver ums-realtek
[ 1.247108] usbcore: registered new interface driver ums-sddr09
[ 1.247276] usbcore: registered new interface driver ums-sddr55
[ 1.247417] usbcore: registered new interface driver ums-usbat
[ 1.247823] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.248537] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.248560] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.249462] rtc_cmos 00:05: RTC can wake from S4
[ 1.250232] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.250280] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.250817] EISA: Probing bus 0 at eisa.0
[ 1.250934] EISA: Detected 0 cards.
[ 1.250944] cpuidle: using governor ladder
[ 1.250952] cpuidle: using governor menu
[ 1.251224] sdhci: Secure Digital Host Controller Interface driver
[ 1.251232] sdhci: Copyright(c) Pierre Ossman
[ 1.251424] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 1.251432] wbsd: Copyright(c) Pierre Ossman
[ 1.251954] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 1.252446] usbcore: registered new interface driver vub300
[ 1.252664] usbcore: registered new interface driver ushc
[ 1.252673] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.253705] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.254601] usbcore: registered new interface driver usbhid
[ 1.254611] usbhid: USB HID core driver
[ 1.254948] TCP: cubic registered
[ 1.254958] NET: Registered protocol family 17
[ 1.255006] Key type dns_resolver registered
[ 1.255465] Using IPI No-Shortcut mode
[ 1.256382] registered taskstats version 1
[ 1.257225] rtc_cmos 00:05: setting system clock to 2013-05-09 17:48:17 UTC (1368121697)
[ 1.272827] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.450817] ata1.00: ATA-6: ST3120023A, 3.31, max UDMA/100
[ 1.450833] ata1.00: 234441648 sectors, multi 16: LBA
[ 1.472607] ata1.00: configured for UDMA/100
[ 1.473006] scsi 0:0:0:0: Direct-Access ATA ST3120023A 3.31 PQ: 0 ANSI: 5
[ 1.474373] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.474545] sd 0:0:0:0: [sda] Write Protect is off
[ 1.474561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.474638] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.531268] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 1.533895] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.541070] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.627851] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4520B, 1.00, max UDMA/33
[ 1.634443] ata2.00: configured for UDMA/33
[ 1.635524] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4520B 1.00 PQ: 0 ANSI: 5
[ 1.637427] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.637441] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.638152] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.476751] ACPI: Invalid Power Resource to register!
[ 1.639440] ACPI: Invalid Power Resource to register!<6>[ 1.639536] Freeing unused kernel memory: 456k freed
[ 1.784725] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 1.832078] tsc: Refined TSC clocksource calibration: 932.884 MHz
[ 1.832104] Switching to clocksource tsc
[ 1.903113] scsi2 : usb-storage 1-2:1.0
[ 2.005098] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[ 9.507719] udevd[1160]: starting version 182
[ 12.739829] parport_pc 00:0b: reported by Plug and Play ACPI
[ 12.739871] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 13.023146] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 13.143068] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.278064] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 13.319617] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.011094] Linux agpgart interface v0.103
[ 14.190808] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.344112] longhaul: VIA C3 'Ezra-T' [C5M] CPU detected. Powersaver supported.
[ 14.344154] longhaul: ACPI I/O at 0x400
[ 14.344185] longhaul: Using northbridge support.
[ 14.703786] ppdev: user-space parallel port driver
[ 14.715174] agpgart: Detected VIA CLE266 chipset
[ 14.761421] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 15.119828] tsc: Marking TSC unstable due to TSC halts in idle
[ 15.127082] ACPI: acpi_idle registered with cpuidle
[ 15.134080] Switching to clocksource acpi_pm
[ 15.777197] firewire_ohci 0000:00:0d.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 16.280445] firewire_core 0000:00:0d.0: created device fw0: GUID 004063000002adc6, S400
[ 16.852844] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 16.969717] mousedev: PS/2 mouse device common for all mice
[ 17.144704] usb 1-4: device descriptor read/64, error -110
[ 17.145587] snd_via82xx 0000:00:11.5: setting latency timer to 64
[ 32.377071] usb 1-4: device descriptor read/64, error -110
[ 32.529348] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 32.761066] usb 1-4: new high-speed USB device number 6 using ehci_hcd
[ 43.095623] cfg80211: Calling CRDA to update world regulatory domain
[ 44.005215] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[ 44.011579] usbcore: registered new interface driver ath9k_htc
[ 44.516475] cfg80211: World regulatory domain updated:
[ 44.516493] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 44.516507] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[ 45.248336] usb 1-1: ath9k_htc: Firmware - htc_9271.fw download failed
[ 47.895074] usb 1-4: device descriptor read/64, error -110
[ 63.131075] usb 1-4: device descriptor read/64, error -110
[ 63.283325] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 63.385063] usb 1-2: reset high-speed USB device number 3 using ehci_hcd
[ 78.519148] usb 1-2: device descriptor read/64, error -110
[ 93.756082] usb 1-2: device descriptor read/64, error -110
[ 93.959075] usb 1-2: reset high-speed USB device number 3 using ehci_hcd
[ 109.091073] usb 1-2: device descriptor read/64, error -110
[ 124.324070] usb 1-2: device descriptor read/64, error -110
[ 124.527074] usb 1-2: reset high-speed USB device number 3 using ehci_hcd
[ 134.950071] usb 1-2: device not accepting address 3, error -110
[ 135.052076] usb 1-2: reset high-speed USB device number 3 using ehci_hcd
[ 145.475068] usb 1-2: device not accepting address 3, error -110
[ 145.476771] scsi 2:0:0:0: Device offlined - not ready after error recovery
[ 145.577076] usb 1-4: new high-speed USB device number 8 using ehci_hcd
[ 160.709075] usb 1-4: device descriptor read/64, error -110
[ 175.944069] usb 1-4: device descriptor read/64, error -110
[ 176.096307] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 176.096348] usb 1-2: USB disconnect, device number 3
[ 176.306073] usb 1-2: new high-speed USB device number 10 using ehci_hcd
[ 191.439070] usb 1-2: device descriptor read/64, error -110
[ 206.673072] usb 1-2: device descriptor read/64, error -110
[ 206.825368] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 207.031071] usb 1-4: new high-speed USB device number 12 using ehci_hcd
[ 222.164069] usb 1-4: device descriptor read/64, error -110
[ 237.400069] usb 1-4: device descriptor read/64, error -110
[ 237.552365] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 237.758067] usb 1-2: new high-speed USB device number 14 using ehci_hcd
[ 252.891072] usb 1-2: device descriptor read/64, error -110
[ 268.126069] usb 1-2: device descriptor read/64, error -110
[ 268.278261] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 268.484069] usb 1-4: new high-speed USB device number 16 using ehci_hcd
[ 283.617059] usb 1-4: device descriptor read/64, error -110
[ 298.851071] usb 1-4: device descriptor read/64, error -110
[ 299.003394] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 299.209076] usb 1-2: new high-speed USB device number 18 using ehci_hcd
[ 314.342071] usb 1-2: device descriptor read/64, error -110
[ 329.576069] usb 1-2: device descriptor read/64, error -110
[ 329.728298] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 329.934069] usb 1-4: new high-speed USB device number 20 using ehci_hcd
[ 337.214402] Bluetooth: Core ver 2.16
[ 337.216652] NET: Registered protocol family 31
[ 337.216667] Bluetooth: HCI device and connection manager initialized
[ 337.216700] Bluetooth: HCI socket layer initialized
[ 337.216714] Bluetooth: L2CAP socket layer initialized
[ 337.216749] Bluetooth: SCO socket layer initialized
[ 339.155103] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 339.155120] Bluetooth: BNEP filters: protocol multicast
[ 339.155152] Bluetooth: BNEP socket layer initialized
[ 345.069092] usb 1-4: device descriptor read/64, error -110
[ 360.308080] usb 1-4: device descriptor read/64, error -110
[ 360.460313] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 360.666096] usb 1-2: new high-speed USB device number 22 using ehci_hcd
[ 364.287738] NET: Registered protocol family 10
[ 375.804088] usb 1-2: device descriptor read/64, error -110
[ 391.043139] usb 1-2: device descriptor read/64, error -110
[ 391.195400] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 391.401112] usb 1-4: new high-speed USB device number 24 using ehci_hcd
[ 406.539090] usb 1-4: device descriptor read/64, error -110
[ 421.778093] usb 1-4: device descriptor read/64, error -110
[ 421.930364] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 422.136099] usb 1-2: new high-speed USB device number 26 using ehci_hcd
[ 437.275089] usb 1-2: device descriptor read/64, error -110
[ 452.514085] usb 1-2: device descriptor read/64, error -110
[ 452.667452] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 452.874098] usb 1-4: new high-speed USB device number 28 using ehci_hcd
[ 468.012094] usb 1-4: device descriptor read/64, error -110
[ 483.251515] Bluetooth: RFCOMM TTY layer initialized
[ 483.251572] Bluetooth: RFCOMM socket layer initialized
[ 483.251581] Bluetooth: RFCOMM ver 1.11
[ 483.253126] usb 1-4: device descriptor read/64, error -110
[ 483.405424] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 483.611102] usb 1-2: new high-speed USB device number 30 using ehci_hcd
[ 484.115096] longhaul: Failed to set requested frequency!
[ 484.115113] longhaul: Enabling "Ignore Revision ID" option.
[ 498.747118] usb 1-2: device descriptor read/64, error -110
[ 513.985099] usb 1-2: device descriptor read/64, error -110
[ 514.137380] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 514.345115] usb 1-4: new high-speed USB device number 32 using ehci_hcd
[ 529.480117] usb 1-4: device descriptor read/64, error -110
[ 544.716117] usb 1-4: device descriptor read/64, error -110
[ 544.868342] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 545.074115] usb 1-2: new high-speed USB device number 34 using ehci_hcd
[ 560.209120] usb 1-2: device descriptor read/64, error -110
[ 575.446117] usb 1-2: device descriptor read/64, error -110
[ 575.598372] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 575.804175] usb 1-4: new high-speed USB device number 36 using ehci_hcd
[ 590.938116] usb 1-4: device descriptor read/64, error -110
[ 606.172144] usb 1-4: device descriptor read/64, error -110
[ 606.324432] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 606.530117] usb 1-2: new high-speed USB device number 38 using ehci_hcd
[ 621.665116] usb 1-2: device descriptor read/64, error -110
[ 636.903093] usb 1-2: device descriptor read/64, error -110
[ 637.055300] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 637.263111] usb 1-4: new high-speed USB device number 40 using ehci_hcd
[ 652.396113] usb 1-4: device descriptor read/64, error -110
[ 667.631115] usb 1-4: device descriptor read/64, error -110
[ 667.783352] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 667.989111] usb 1-2: new high-speed USB device number 42 using ehci_hcd
[ 683.124124] usb 1-2: device descriptor read/64, error -110
[ 698.360115] usb 1-2: device descriptor read/64, error -110
[ 698.512490] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 698.718159] usb 1-4: new high-speed USB device number 44 using ehci_hcd
[ 713.856150] usb 1-4: device descriptor read/64, error -110
[ 729.094123] usb 1-4: device descriptor read/64, error -110
[ 729.246458] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 729.452081] usb 1-2: new high-speed USB device number 46 using ehci_hcd
[ 744.584116] usb 1-2: device descriptor read/64, error -110
[ 759.821146] usb 1-2: device descriptor read/64, error -110
[ 759.973445] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 760.179134] usb 1-4: new high-speed USB device number 48 using ehci_hcd
[ 775.314153] usb 1-4: device descriptor read/64, error -110
[ 790.549153] usb 1-4: device descriptor read/64, error -110
[ 790.701429] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 790.907143] usb 1-2: new high-speed USB device number 50 using ehci_hcd
[ 806.040140] usb 1-2: device descriptor read/64, error -110
[ 821.274145] usb 1-2: device descriptor read/64, error -110
[ 821.426475] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 821.632114] usb 1-4: new high-speed USB device number 52 using ehci_hcd
[ 836.767117] usb 1-4: device descriptor read/64, error -110
[ 852.003141] usb 1-4: device descriptor read/64, error -110
[ 852.155444] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 852.361167] usb 1-2: new high-speed USB device number 54 using ehci_hcd
[ 867.496114] usb 1-2: device descriptor read/64, error -110
[ 882.732100] usb 1-2: device descriptor read/64, error -110
[ 882.884354] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 883.090172] usb 1-4: new high-speed USB device number 56 using ehci_hcd
[ 898.228196] usb 1-4: device descriptor read/64, error -110
[ 913.462147] usb 1-4: device descriptor read/64, error -110
[ 913.614422] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 913.820115] usb 1-2: new high-speed USB device number 58 using ehci_hcd
[ 928.953151] usb 1-2: device descriptor read/64, error -110
[ 944.190173] usb 1-2: device descriptor read/64, error -110
[ 944.342385] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 944.548158] usb 1-4: new high-speed USB device number 60 using ehci_hcd
[ 959.681118] usb 1-4: device descriptor read/64, error -110
[ 974.914115] usb 1-4: device descriptor read/64, error -110
[ 975.066441] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 975.068884] usb 1-1: ath9k_htc: USB layer deinitialized
[ 980.292151] usb 1-2: new high-speed USB device number 62 using ehci_hcd
[ 995.426119] usb 1-2: device descriptor read/64, error -110
[ 1010.660116] usb 1-2: device descriptor read/64, error -110
[ 1010.812425] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1011.018138] usb 1-4: new high-speed USB device number 64 using ehci_hcd
[ 1026.154151] usb 1-4: device descriptor read/64, error -110
[ 1041.390159] usb 1-4: device descriptor read/64, error -110
[ 1041.542340] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1041.748126] usb 1-2: new high-speed USB device number 66 using ehci_hcd
[ 1056.881126] usb 1-2: device descriptor read/64, error -110
[ 1072.117145] usb 1-2: device descriptor read/64, error -110
[ 1072.269379] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1072.475151] usb 1-4: new high-speed USB device number 68 using ehci_hcd
[ 1087.608176] usb 1-4: device descriptor read/64, error -110
[ 1102.843172] usb 1-4: device descriptor read/64, error -110
[ 1102.995389] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1103.201168] usb 1-2: new high-speed USB device number 70 using ehci_hcd
[ 1118.336160] usb 1-2: device descriptor read/64, error -110
[ 1133.572142] usb 1-2: device descriptor read/64, error -110
[ 1133.724427] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1133.930162] usb 1-4: new high-speed USB device number 72 using ehci_hcd
[ 1149.064152] usb 1-4: device descriptor read/64, error -110
[ 1164.299193] usb 1-4: device descriptor read/64, error -110
[ 1164.451369] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1164.657113] usb 1-2: new high-speed USB device number 74 using ehci_hcd
[ 1179.791153] usb 1-2: device descriptor read/64, error -110
[ 1195.028140] usb 1-2: device descriptor read/64, error -110
[ 1195.180477] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1195.386151] usb 1-4: new high-speed USB device number 76 using ehci_hcd
[ 1210.525116] usb 1-4: device descriptor read/64, error -110
[ 1225.761139] usb 1-4: device descriptor read/64, error -110
[ 1225.913497] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1226.119169] usb 1-2: new high-speed USB device number 78 using ehci_hcd
[ 1241.256120] usb 1-2: device descriptor read/64, error -110
[ 1256.494101] usb 1-2: device descriptor read/64, error -110
[ 1256.646321] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1256.852091] usb 1-4: new high-speed USB device number 80 using ehci_hcd
[ 1271.990100] usb 1-4: device descriptor read/64, error -110
[ 1287.229098] usb 1-4: device descriptor read/64, error -110
[ 1287.381409] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1287.587103] usb 1-2: new high-speed USB device number 82 using ehci_hcd
[ 1302.725090] usb 1-2: device descriptor read/64, error -110
[ 1317.964150] usb 1-2: device descriptor read/64, error -110
[ 1318.116370] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1318.322098] usb 1-4: new high-speed USB device number 84 using ehci_hcd
[ 1333.460211] usb 1-4: device descriptor read/64, error -110
[ 1348.699083] usb 1-4: device descriptor read/64, error -110
[ 1348.851337] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1349.057095] usb 1-2: new high-speed USB device number 86 using ehci_hcd
[ 1364.195121] usb 1-2: device descriptor read/64, error -110
[ 1379.434096] usb 1-2: device descriptor read/64, error -110
[ 1379.586301] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1379.792088] usb 1-4: new high-speed USB device number 88 using ehci_hcd
[ 1394.930093] usb 1-4: device descriptor read/64, error -110
[ 1410.166157] usb 1-4: device descriptor read/64, error -110
[ 1410.320442] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1410.526116] usb 1-2: new high-speed USB device number 90 using ehci_hcd
[ 1425.660117] usb 1-2: device descriptor read/64, error -110
[ 1440.894114] usb 1-2: device descriptor read/64, error -110
[ 1441.046356] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1441.254119] usb 1-4: new high-speed USB device number 92 using ehci_hcd
[ 1456.390208] usb 1-4: device descriptor read/64, error -110
[ 1471.624149] usb 1-4: device descriptor read/64, error -110
[ 1471.776374] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1471.982168] usb 1-2: new high-speed USB device number 94 using ehci_hcd
[ 1487.119172] usb 1-2: device descriptor read/64, error -110
[ 1502.353114] usb 1-2: device descriptor read/64, error -110
[ 1502.505406] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1502.711165] usb 1-4: new high-speed USB device number 96 using ehci_hcd
[ 1517.844117] usb 1-4: device descriptor read/64, error -110
[ 1533.081120] usb 1-4: device descriptor read/64, error -110
[ 1533.233350] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1533.439113] usb 1-2: new high-speed USB device number 98 using ehci_hcd
[ 1548.574080] usb 1-2: device descriptor read/64, error -110
[ 1551.123519] udev[3141]: starting version 165
[ 1559.202155] Floppy drive(s): fd0 is 1.44M
[ 1559.216730] FDC 0 is a post-1991 82077
[ 1559.985749] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1559.991418] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1563.815088] usb 1-2: device descriptor read/64, error -110
[ 1563.967351] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1564.174123] usb 1-4: new high-speed USB device number 100 using ehci_hcd
[ 1579.312712] usb 1-4: device descriptor read/64, error -110
[ 1594.551090] usb 1-4: device descriptor read/64, error -110
[ 1594.703317] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1594.909094] usb 1-2: new high-speed USB device number 102 using ehci_hcd
[ 1610.047155] usb 1-2: device descriptor read/64, error -110
[ 1625.283129] usb 1-2: device descriptor read/64, error -110
[ 1625.435438] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1625.641095] usb 1-4: new high-speed USB device number 104 using ehci_hcd
[ 1640.774121] usb 1-4: device descriptor read/64, error -110
[ 1656.009152] usb 1-4: device descriptor read/64, error -110
[ 1656.161441] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1656.367124] usb 1-2: new high-speed USB device number 106 using ehci_hcd
[ 1671.501127] usb 1-2: device descriptor read/64, error -110
[ 1686.737146] usb 1-2: device descriptor read/64, error -110
[ 1686.889343] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1687.095115] usb 1-4: new high-speed USB device number 108 using ehci_hcd
[ 1702.231120] usb 1-4: device descriptor read/64, error -110
[ 1717.465145] usb 1-4: device descriptor read/64, error -110
[ 1717.617387] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1717.622763] usb 1-1: USB disconnect, device number 2
[ 1717.836133] usb 1-1: new high-speed USB device number 110 using ehci_hcd
[ 1732.971116] usb 1-1: device descriptor read/64, error -110
[ 1748.155452] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1748.361115] usb 1-2: new high-speed USB device number 111 using ehci_hcd
[ 1763.495143] usb 1-2: device descriptor read/64, error -110
[ 1778.733081] usb 1-2: device descriptor read/64, error -110
[ 1778.885404] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1779.091114] usb 1-4: new high-speed USB device number 113 using ehci_hcd
[ 1794.229090] usb 1-4: device descriptor read/64, error -110
[ 1809.465152] usb 1-4: device descriptor read/64, error -110
[ 1809.617486] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1809.823164] usb 1-1: new high-speed USB device number 115 using ehci_hcd
[ 1824.956161] usb 1-1: device descriptor read/64, error -110
[ 1840.193164] usb 1-1: device descriptor read/64, error -110
[ 1840.345437] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1840.551111] usb 1-2: new high-speed USB device number 117 using ehci_hcd
[ 1855.684144] usb 1-2: device descriptor read/64, error -110
[ 1870.918115] usb 1-2: device descriptor read/64, error -110
[ 1871.070415] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1871.276122] usb 1-4: new high-speed USB device number 119 using ehci_hcd
[ 1886.411583] usb 1-4: device descriptor read/64, error -110
[ 1901.648119] usb 1-4: device descriptor read/64, error -110
[ 1901.800381] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1902.006149] usb 1-1: new high-speed USB device number 121 using ehci_hcd
[ 1917.140152] usb 1-1: device descriptor read/64, error -110
[ 1932.374145] usb 1-1: device descriptor read/64, error -110
[ 1932.526459] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1932.732178] usb 1-2: new high-speed USB device number 123 using ehci_hcd
[ 1947.866106] usb 1-2: device descriptor read/64, error -110
[ 1963.102152] usb 1-2: device descriptor read/64, error -110
[ 1963.254405] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1963.460147] usb 1-4: new high-speed USB device number 125 using ehci_hcd
[ 1978.595107] usb 1-4: device descriptor read/64, error -110
[ 1993.831124] usb 1-4: device descriptor read/64, error -110
[ 1993.983439] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1994.189135] usb 1-1: new high-speed USB device number 127 using ehci_hcd
[ 2009.323119] usb 1-1: device descriptor read/64, error -110
[ 2024.559116] usb 1-1: device descriptor read/64, error -110
[ 2024.711410] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2024.917114] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 2040.054156] usb 1-2: device descriptor read/64, error -110
[ 2055.288115] usb 1-2: device descriptor read/64, error -110
[ 2055.440447] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2055.646115] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[ 2070.778115] usb 1-4: device descriptor read/64, error -110
[ 2086.011156] usb 1-4: device descriptor read/64, error -110
[ 2086.163463] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2086.369158] usb 1-1: new high-speed USB device number 7 using ehci_hcd
[ 2101.503149] usb 1-1: device descriptor read/64, error -110
[ 2116.737142] usb 1-1: device descriptor read/64, error -110
[ 2116.889448] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2117.095129] usb 1-2: new high-speed USB device number 9 using ehci_hcd
[ 2132.230122] usb 1-2: device descriptor read/64, error -110
[ 2147.467143] usb 1-2: device descriptor read/64, error -110
[ 2147.619344] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2147.825114] usb 1-4: new high-speed USB device number 11 using ehci_hcd
[ 2162.959126] usb 1-4: device descriptor read/64, error -110
[ 2178.194127] usb 1-4: device descriptor read/64, error -110
[ 2178.346394] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2178.552131] usb 1-1: new high-speed USB device number 13 using ehci_hcd
[ 2193.687114] usb 1-1: device descriptor read/64, error -110
[ 2208.922117] usb 1-1: device descriptor read/64, error -110
[ 2209.074418] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2209.280123] usb 1-2: new high-speed USB device number 15 using ehci_hcd
[ 2224.414115] usb 1-2: device descriptor read/64, error -110
[ 2239.653114] usb 1-2: device descriptor read/64, error -110
[ 2239.805496] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2240.011151] usb 1-4: new high-speed USB device number 17 using ehci_hcd
[ 2255.148158] usb 1-4: device descriptor read/64, error -110
[ 2270.382147] usb 1-4: device descriptor read/64, error -110
[ 2270.534458] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2270.740162] usb 1-1: new high-speed USB device number 19 using ehci_hcd
[ 2285.825387] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2286.031101] usb 1-2: new high-speed USB device number 20 using ehci_hcd
[ 2301.165120] usb 1-2: device descriptor read/64, error -110
[ 2316.401101] usb 1-2: device descriptor read/64, error -110
[ 2316.553357] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2316.759097] usb 1-4: new high-speed USB device number 22 using ehci_hcd
[ 2331.896088] usb 1-4: device descriptor read/64, error -110
[ 2347.135112] usb 1-4: device descriptor read/64, error -110
[ 2347.287441] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2347.493144] usb 1-1: new high-speed USB device number 24 using ehci_hcd
[ 2362.633114] usb 1-1: device descriptor read/64, error -110
[ 2377.872095] usb 1-1: device descriptor read/64, error -110
[ 2378.024415] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2378.230076] usb 1-2: new high-speed USB device number 26 using ehci_hcd
[ 2393.363118] usb 1-2: device descriptor read/64, error -110
[ 2408.600116] usb 1-2: device descriptor read/64, error -110
[ 2408.752352] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2408.958126] usb 1-4: new high-speed USB device number 28 using ehci_hcd
[ 2424.091117] usb 1-4: device descriptor read/64, error -110
[ 2439.324116] usb 1-4: device descriptor read/64, error -110
[ 2439.476365] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2439.686118] usb 1-1: new high-speed USB device number 30 using ehci_hcd
[ 2454.818123] usb 1-1: device descriptor read/64, error -110
[ 2470.053159] usb 1-1: device descriptor read/64, error -110
[ 2470.205517] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2470.411155] usb 1-2: new high-speed USB device number 32 using ehci_hcd
[ 2485.544123] usb 1-2: device descriptor read/64, error -110
[ 2500.777113] usb 1-2: device descriptor read/64, error -110
[ 2500.929509] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2501.135146] usb 1-4: new high-speed USB device number 34 using ehci_hcd
[ 2516.268114] usb 1-4: device descriptor read/64, error -110
[ 2531.501112] usb 1-4: device descriptor read/64, error -110
[ 2531.653381] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2531.859151] usb 1-1: new high-speed USB device number 36 using ehci_hcd
[ 2546.998163] usb 1-1: device descriptor read/64, error -110
[ 2562.232154] usb 1-1: device descriptor read/64, error -110
[ 2562.384427] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2562.590168] usb 1-2: new high-speed USB device number 38 using ehci_hcd
[ 2577.723430] usb 1-2: device descriptor read/64, error -110
[ 2592.959169] usb 1-2: device descriptor read/64, error -110
[ 2593.111413] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2593.317114] usb 1-4: new high-speed USB device number 40 using ehci_hcd
[ 2608.452138] usb 1-4: device descriptor read/64, error -110
[ 2623.689118] usb 1-4: device descriptor read/64, error -110
[ 2623.841414] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2624.047119] usb 1-1: new high-speed USB device number 42 using ehci_hcd
[ 2639.180118] usb 1-1: device descriptor read/64, error -110
[ 2654.417115] usb 1-1: device descriptor read/64, error -110
[ 2654.569459] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2654.775161] usb 1-2: new high-speed USB device number 44 using ehci_hcd
[ 2669.911093] usb 1-2: device descriptor read/64, error -110
[ 2685.149166] usb 1-2: device descriptor read/64, error -110
[ 2685.301471] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2685.509146] usb 1-4: new high-speed USB device number 46 using ehci_hcd
[ 2700.642172] usb 1-4: device descriptor read/64, error -110
[ 2715.877135] usb 1-4: device descriptor read/64, error -110
[ 2716.029488] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2716.235104] usb 1-1: new high-speed USB device number 48 using ehci_hcd
[ 2731.370090] usb 1-1: device descriptor read/64, error -110
[ 2746.606115] usb 1-1: device descriptor read/64, error -110
[ 2746.758391] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2746.964153] usb 1-2: new high-speed USB device number 50 using ehci_hcd
[ 2762.101174] usb 1-2: device descriptor read/64, error -110
[ 2777.339103] usb 1-2: device descriptor read/64, error -110
[ 2777.491543] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2777.697164] usb 1-4: new high-speed USB device number 52 using ehci_hcd
[ 2792.832119] usb 1-4: device descriptor read/64, error -110
[ 2808.066125] usb 1-4: device descriptor read/64, error -110
[ 2808.218363] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2808.424148] usb 1-1: new high-speed USB device number 54 using ehci_hcd
[ 2823.558124] usb 1-1: device descriptor read/64, error -110
[ 2838.793156] usb 1-1: device descriptor read/64, error -110
[ 2838.945520] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2839.151163] usb 1-2: new high-speed USB device number 56 using ehci_hcd
[ 2854.283153] usb 1-2: device descriptor read/64, error -110
[ 2869.516112] usb 1-2: device descriptor read/64, error -110
[ 2869.668382] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2869.874141] usb 1-4: new high-speed USB device number 58 using ehci_hcd
[ 2885.010120] usb 1-4: device descriptor read/64, error -110
[ 2900.247150] usb 1-4: device descriptor read/64, error -110
[ 2900.399482] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2900.605109] usb 1-1: new high-speed USB device number 60 using ehci_hcd
[ 2915.737146] usb 1-1: device descriptor read/64, error -110
[ 2930.973147] usb 1-1: device descriptor read/64, error -110
[ 2931.125465] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2931.331153] usb 1-2: new high-speed USB device number 62 using ehci_hcd
[ 2946.465115] usb 1-2: device descriptor read/64, error -110
[ 2961.700115] usb 1-2: device descriptor read/64, error -110
[ 2961.852382] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2962.058140] usb 1-4: new high-speed USB device number 64 using ehci_hcd
[ 2977.193164] usb 1-4: device descriptor read/64, error -110
[ 2992.428149] usb 1-4: device descriptor read/64, error -110
[ 2992.580452] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2992.786129] usb 1-1: new high-speed USB device number 66 using ehci_hcd
[ 3007.921179] usb 1-1: device descriptor read/64, error -110
[ 3023.156155] usb 1-1: device descriptor read/64, error -110
[ 3023.308423] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3023.514114] usb 1-2: new high-speed USB device number 68 using ehci_hcd
[ 3038.649129] usb 1-2: device descriptor read/64, error -110
[ 3053.884145] usb 1-2: device descriptor read/64, error -110
[ 3054.036411] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 3054.242120] usb 1-4: new high-speed USB device number 70 using ehci_hcd
[ 3069.377115] usb 1-4: device descriptor read/64, error -110
[ 3084.614115] usb 1-4: device descriptor read/64, error -110
[ 3084.766441] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 3084.972129] usb 1-1: new high-speed USB device number 72 using ehci_hcd
[ 3100.105126] usb 1-1: device descriptor read/64, error -110
[ 3115.342116] usb 1-1: device descriptor read/64, error -110
[ 3115.494366] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3115.700171] usb 1-2: new high-speed USB device number 74 using ehci_hcd
[ 3130.832113] usb 1-2: device descriptor read/64, error -110
[ 3146.067117] usb 1-2: device descriptor read/64, error -110
[ 3146.219436] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 3146.425160] usb 1-4: new high-speed USB device number 76 using ehci_hcd
[ 3161.560114] usb 1-4: device descriptor read/64, error -110
[ 3176.796147] usb 1-4: device descriptor read/64, error -110
[ 3176.948441] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 3177.154114] usb 1-1: new high-speed USB device number 78 using ehci_hcd
[ 3192.287150] usb 1-1: device descriptor read/64, error -110
[ 3207.524079] usb 1-1: device descriptor read/64, error -110
[ 3207.676400] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3207.882141] usb 1-2: new high-speed USB device number 80 using ehci_hcd
[ 3223.
