@USUARIONUEVO
El fondo de pantalla muy guapo.
Instalación en hdd perfecta
La instalación de kodi termina sin problemas hasta que lo inicias.
No aparece la opción Zeroconfig y sale un error de JSON-RPC y no funciona correctamente.
Abiword no llega a compilarse sale un error.
CXXLD libabiword-3.0.la
/usr/bin/grep: /usr/lib64/libdb-4.4.la: No such file or directory
/usr/bin/sed: can't read /usr/lib64/libdb-4.4.la: No such file or directory
libtool: error: '/usr/lib64/libdb-4.4.la' is not a valid libtool archive
Makefile:850: fallo en las instrucciones para el objetivo 'libabiword-3.0.la'
make[3]: *** [libabiword-3.0.la] Error 1
make[3]: se sale del directorio '/tmp/SBo/abiword-3.0.2/src'
Makefile:1168: fallo en las instrucciones para el objetivo 'all-recursive'
make[2]: *** [all-recursive] Error 1
make[2]: se sale del directorio '/tmp/SBo/abiword-3.0.2/src'
Makefile:784: fallo en las instrucciones para el objetivo 'all-recursive'
make[1]: *** [all-recursive] Error 1
make[1]: se sale del directorio '/tmp/SBo/abiword-3.0.2'
Makefile:604: fallo en las instrucciones para el objetivo 'all'
make: *** [all] Error 2
Total build time for the package abiword : 52 Min 21 Sec
+==============================================================================
| Some error on the package abiword-3.0.2 [ FAILED ]
+==============================================================================
# airmon-ng start wlan0
Found 3 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to run 'airmon-ng check kill'
PID Name
977 NetworkManager
1047 wpa_supplicant
27515 dhclient
PHY Interface Driver Chipset
phy0 wlan0 rtl8723be Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
(mac80211 monitor mode vif enabled for [phy0]wlan0 on [phy0]
wlan0mon)
(mac80211 station mode vif disabled for [phy0]wlan0)
¿Ya no se parchea para que salga como mon0, mon1, etc...?
pip da error al instalar slpkg que no esta en la distro.
slpkg-3.3.8.tar.gz
git clone
https://gitlab.com/dslackw/slpkg.gitcd slpkg/
python setup.py install
Salu2