con lo primero no me salia nada
con la segunda esto
wifislax ~ # modprobe rtl8187
wifislax ~ # dmesg
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.15.0-wifislax (root@wifislax) (gcc version 4.8.3 (GCC) ) #1 SMP PREEMPT Thu Jun 12 09:57:16 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037fc0000-0x0000000037feffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037ff0000-0x0000000037ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff380000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM2NF6G-VSTA, BIOS P2.00 02/06/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x0166c000, 0x0166cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37ef7000-0x37faefff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37746000-0x377fd9ff]
[ 0.000000] Move RAMDISK from [mem 0x37ef7000-0x37fae9ff] to [mem 0x37746000-0x377fd9ff]
[ 0.000000] ACPI: RSDP 0x000FA870 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x37FB0000 000034 (v01 A_M_I OEMRSDT 02000706 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x37FB0200 000084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x37FB0440 004BE8 (v01 AM2N6 AM2N6191 00000191 INTL 20051117)
[ 0.000000] ACPI: FACS 0x37FC0000 000040
[ 0.000000] ACPI: APIC 0x37FB0390 000070 (v01 A_M_I OEMAPIC 02000706 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x37FB0400 00003C (v01 A_M_I OEMMCFG 02000706 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x37FC0040 000060 (v01 A_M_I AMI_OEM 02000706 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0166d000, 0x0166dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x37faffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x37faffff]
[ 0.000000] On node 0 totalpages: 229198
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 16 pages used for memmap
[ 0.000000] HighMem zone: 1970 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.000000] e820: [mem 0x38000000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f7028000 s28032 r0 d21120 u49152
[ 0.000000] pcpu-alloc: s28032 r0 d21120 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227422
[ 0.000000] Kernel command line: quiet initrd=/boot/initrd.xz vga=788 noload=000-PAE;005-K;013-W BOOT_IMAGE=/boot/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037fb0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 901316K/916792K available (4317K kernel code, 313K rwdata, 1004K rodata, 504K init, 380K bss, 15476K reserved, 7880K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd37000 - 0xfffff000 (2848 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1584000 - 0xc1602000 ( 504 kB)
[ 0.000000] .data : 0xc14378a0 - 0xc1582580 (1323 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14378a0 (4318 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1607.218 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.43 BogoMIPS (lpj=1607218)
[ 0.001017] pid_max: default: 32768 minimum: 301
[ 0.001027] ACPI: Core revision 20140214
[ 0.005586] ACPI: All ACPI Tables successfully acquired
[ 0.005962] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.005966] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006242] Initializing cgroup subsys net_cls
[ 0.006269] mce: CPU supports 5 MCE banks
[ 0.006278] LVT offset 0 assigned for vector 0xf9
[ 0.006283] process: using AMD E400 aware idle routine
[ 0.006290] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.006290] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.006290] tlb_flushall_shift: 6
[ 0.008806] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.009372] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.019393] smpboot: CPU0: AMD Sempron(tm) Processor 3000+ (fam: 0f, model: 4f, stepping: 02)
[ 0.020000] Performance Events: AMD PMU driver.
[ 0.020000] ... version: 0
[ 0.020000] ... bit width: 48
[ 0.020000] ... generic registers: 4
[ 0.020000] ... value mask: 0000ffffffffffff
[ 0.020000] ... max period: 00007fffffffffff
[ 0.020000] ... fixed-purpose events: 0
[ 0.020000] ... event mask: 000000000000000f
[ 0.023087] x86: Booted up 1 node, 1 CPUs
[ 0.023091] smpboot: Total of 1 processors activated (3214.43 BogoMIPS)
[ 0.023491] devtmpfs: initialized
[ 0.023886] PM: Registering ACPI NVS region [mem 0x37fc0000-0x37feffff] (196608 bytes)
[ 0.024014] pinctrl core: initialized pinctrl subsystem
[ 0.024106] NET: Registered protocol family 16
[ 0.024368] EISA bus registered
[ 0.024371] cpuidle: using governor ladder
[ 0.024374] cpuidle: using governor menu
[ 0.024381] node 0 link 0: io port [1000, ffffff]
[ 0.024385] TOM: 0000000040000000 aka 1024M
[ 0.024389] node 0 link 0: mmio [e0000000, efffffff]
[ 0.024394] node 0 link 0: mmio [a0000, bffff]
[ 0.024397] node 0 link 0: mmio [40000000, fe0bffff]
[ 0.024401] bus: [bus 00-ff] on node 0 link 0
[ 0.024404] bus: 00 [io 0x0000-0xffff]
[ 0.024407] bus: 00 [mem 0x40000000-0xffffffff]
[ 0.024410] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.024503] ACPI: bus type PCI registered
[ 0.024507] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.024624] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.024628] PCI: not using MMCONFIG
[ 0.025381] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.025384] PCI: Using configuration type 1 for base access
[ 0.030206] ACPI: Added _OSI(Module Device)
[ 0.030212] ACPI: Added _OSI(Processor Device)
[ 0.030214] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.030217] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.032575] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.035407] ACPI: Interpreter enabled
[ 0.035428] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.035435] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140214/hwxface-580)
[ 0.035450] ACPI: (supports S0 S1 S4 S5)
[ 0.035453] ACPI: Using IOAPIC for interrupt routing
[ 0.035483] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.036823] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.036826] PCI: Using MMCONFIG for extended config space
[ 0.036962] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.046923] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.046935] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.047286] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.047429] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.047434] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.047438] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.047442] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.047447] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xff37ffff] (ignored)
[ 0.047450] PCI: root bus 00: hardware-probed resources
[ 0.047704] PCI host bridge to bus 0000:00
[ 0.047710] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.047714] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.047718] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
[ 0.047722] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.047751] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[ 0.048039] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[ 0.048180] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.048195] pci 0000:00:01.1: reg 0x10: [io 0xec00-0xec3f]
[ 0.048214] pci 0000:00:01.1: reg 0x20: [io 0x5000-0x503f]
[ 0.048222] pci 0000:00:01.1: reg 0x24: [io 0x6000-0x603f]
[ 0.048255] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.048302] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.048385] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.048511] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.048523] pci 0000:00:02.0: reg 0x10: [mem 0xdffff000-0xdfffffff]
[ 0.048563] pci 0000:00:02.0: supports D1 D2
[ 0.048566] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.048607] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.048692] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.048706] pci 0000:00:02.1: reg 0x10: [mem 0xdfffec00-0xdfffecff]
[ 0.048753] pci 0000:00:02.1: supports D1 D2
[ 0.048757] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.048801] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.048894] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.048964] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.049108] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.049123] pci 0000:00:05.0: reg 0x10: [mem 0xdfff8000-0xdfffbfff]
[ 0.049172] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.049217] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.049310] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.049337] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.049350] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.049354] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.049358] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.049361] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.049478] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[ 0.049491] pci 0000:00:07.0: reg 0x10: [mem 0xdfffd000-0xdfffdfff]
[ 0.049498] pci 0000:00:07.0: reg 0x14: [io 0xe480-0xe487]
[ 0.049539] pci 0000:00:07.0: supports D1 D2
[ 0.049543] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.049588] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.049676] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.049687] pci 0000:00:08.0: reg 0x10: [io 0x0e00-0x0e07]
[ 0.049694] pci 0000:00:08.0: reg 0x14: [io 0x0e20-0x0e23]
[ 0.049701] pci 0000:00:08.0: reg 0x18: [io 0x0e40-0x0e47]
[ 0.049708] pci 0000:00:08.0: reg 0x1c: [io 0x0e60-0x0e63]
[ 0.049714] pci 0000:00:08.0: reg 0x20: [io 0xd880-0xd88f]
[ 0.049721] pci 0000:00:08.0: reg 0x24: [mem 0xdfffc000-0xdfffcfff]
[ 0.049856] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.049893] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.049935] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.050044] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.050078] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.050122] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.050213] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.050247] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.050289] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.050375] pci 0000:00:0d.0: [10de:03d1] type 00 class 0x030000
[ 0.050386] pci 0000:00:0d.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.050394] pci 0000:00:0d.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.050403] pci 0000:00:0d.0: reg 0x1c: [mem 0xdd000000-0xddffffff 64bit]
[ 0.050412] pci 0000:00:0d.0: reg 0x30: [mem 0xdffc0000-0xdffdffff pref]
[ 0.050538] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.050691] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.050798] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.050905] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.051114] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.051123] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.051127] pci 0000:00:04.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[ 0.051131] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.051211] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.051289] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.051353] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.051369] pci_bus 0000:00: on NUMA node 0
[ 0.052490] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.052616] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.052739] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.052862] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.052983] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.053191] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.053313] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.053435] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.053556] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.053677] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.053798] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.053928] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.054092] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.054214] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[ 0.054334] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.054460] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.054580] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 0.054705] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[ 0.054841] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.054952] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.055130] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.055134] vgaarb: loaded
[ 0.055137] vgaarb: bridge control possible 0000:00:0d.0
[ 0.055376] SCSI subsystem initialized
[ 0.055463] libata version 3.00 loaded.
[ 0.055472] ACPI: bus type USB registered
[ 0.055532] usbcore: registered new interface driver usbfs
[ 0.055558] usbcore: registered new interface driver hub
[ 0.055620] usbcore: registered new device driver usb
[ 0.055666] Linux video capture interface: v2.00
[ 0.055790] Advanced Linux Sound Architecture Driver Initialized.
[ 0.055793] PCI: Using ACPI for IRQ routing
[ 0.055799] PCI: pci_cache_line_size set to 64 bytes
[ 0.055840] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.055843] e820: reserve RAM buffer [mem 0x37fb0000-0x37ffffff]
[ 0.056215] Switched to clocksource refined-jiffies
[ 0.056313] pnp: PnP ACPI init
[ 0.056332] ACPI: bus type PNP registered
[ 0.056386] pnp 00:00: [dma 4]
[ 0.056433] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.056501] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.056558] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.056615] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.057130] pnp 00:04: [dma 2]
[ 0.057219] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.057612] pnp 00:05: [dma 3]
[ 0.057782] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.058687] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.058692] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.058697] system 00:06: [io 0x4000-0x407f] could not be reserved
[ 0.058701] system 00:06: [io 0x4080-0x40ff] has been reserved
[ 0.058706] system 00:06: [io 0x4400-0x447f] has been reserved
[ 0.058710] system 00:06: [io 0x4480-0x44ff] has been reserved
[ 0.058715] system 00:06: [io 0x4800-0x487f] has been reserved
[ 0.058719] system 00:06: [io 0x4880-0x48ff] has been reserved
[ 0.058723] system 00:06: [io 0x2000-0x207f] has been reserved
[ 0.058728] system 00:06: [io 0x2080-0x20ff] has been reserved
[ 0.058733] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.058738] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.058742] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.058747] system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.058752] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.058756] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.058762] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.058921] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.058926] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.058930] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.059049] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.059348] pnp 00:09: [dma 0 disabled]
[ 0.059528] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.059686] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.059692] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.059821] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.059827] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.060127] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.060133] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.060137] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.060142] system 00:0c: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.060147] system 00:0c: [mem 0xff380000-0xffffffff] has been reserved
[ 0.060152] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.060567] pnp: PnP ACPI: found 13 devices
[ 0.060570] ACPI: bus type PNP unregistered
[ 0.060574] PnPBIOS: Disabled by ACPI PNP
[ 0.098543] Switched to clocksource acpi_pm
[ 0.098580] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.098589] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.098596] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.098604] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.098612] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.098616] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[ 0.098620] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.098625] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.098629] pci_bus 0000:01: resource 5 [mem 0x40000000-0xffffffff]
[ 0.098633] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.098682] NET: Registered protocol family 2
[ 0.098877] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.098908] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.098958] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.098958] TCP: reno registered
[ 0.098958] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.098958] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.098958] NET: Registered protocol family 1
[ 0.098991] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.573402] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.573558] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.573610] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.573674] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.573735] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.573801] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.573872] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.573947] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.573957] pci 0000:00:0d.0: Boot video device
[ 0.573969] PCI: CLS 64 bytes, default 64
[ 0.574235] Unpacking initramfs...
[ 0.722713] Freeing initrd memory: 736K (f7746000 - f77fe000)
[ 0.723394] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.723768] bounce pool size: 64 pages
[ 0.727573] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.727711] fuse init (API version 7.23)
[ 0.727878] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.728633] aufs 3.x-rcN-20140609
[ 0.728641] msgmni has been set to 1746
[ 0.728918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.728922] io scheduler noop registered
[ 0.728924] io scheduler deadline registered (default)
[ 0.729114] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.729225] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.729317] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.729469] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.729474] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.729499] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[ 0.729504] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[ 0.729527] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[ 0.729532] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[ 0.729548] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.729590] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.729794] simple-framebuffer simple-framebuffer.0: framebuffer at 0xc0000000, 0xeb000 bytes, mapped to 0xf8080000
[ 0.729799] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=800x600x16, linelength=1600
[ 0.736271] Console: switching to colour frame buffer device 100x37
[ 0.742511] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.742725] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.742731] ACPI: Power Button [PWRB]
[ 0.742850] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.742854] ACPI: Power Button [PWRF]
[ 0.743037] isapnp: Scanning for PnP cards...
[ 1.098929] isapnp: No Plug & Play device found
[ 1.099120] Linux agpgart interface v0.103
[ 1.099145] [drm] Initialized drm 1.1.0 20060810
[ 1.100455] loop: module loaded
[ 1.101041] sata_nv 0000:00:08.0: version 3.5
[ 1.101346] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.102152] scsi0 : sata_nv
[ 1.102362] scsi1 : sata_nv
[ 1.102452] ata1: SATA max UDMA/133 cmd 0xe00 ctl 0xe20 bmdma 0xd880 irq 21
[ 1.102456] ata2: SATA max UDMA/133 cmd 0xe40 ctl 0xe60 bmdma 0xd888 irq 21
[ 1.102742] pata_amd 0000:00:06.0: version 0.4.1
[ 1.104318] scsi2 : pata_amd
[ 1.104509] scsi3 : pata_amd
[ 1.104596] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.104599] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.105830] Fusion MPT base driver 3.04.20
[ 1.105834] Copyright (c) 1999-2008 LSI Corporation
[ 1.105847] Fusion MPT SPI Host driver 3.04.20
[ 1.105879] Fusion MPT SAS Host driver 3.04.20
[ 1.105925] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.105928] ehci-pci: EHCI PCI platform driver
[ 1.106184] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 1.106196] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.106209] ehci-pci 0000:00:02.1: debug port 1
[ 1.106240] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 1.106272] ehci-pci 0000:00:02.1: irq 22, io mem 0xdfffec00
[ 1.112028] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.112380] hub 1-0:1.0: USB hub found
[ 1.112394] hub 1-0:1.0: 8 ports detected
[ 1.112741] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.112750] ohci-pci: OHCI PCI platform driver
[ 1.112921] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 1.112931] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.112987] ohci-pci 0000:00:02.0: irq 23, io mem 0xdffff000
[ 1.165309] hub 2-0:1.0: USB hub found
[ 1.165321] hub 2-0:1.0: 8 ports detected
[ 1.165642] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.165767] usbcore: registered new interface driver usb-storage
[ 1.165788] usbcore: registered new interface driver ums-alauda
[ 1.165808] usbcore: registered new interface driver ums-cypress
[ 1.165829] usbcore: registered new interface driver ums-datafab
[ 1.165850] usbcore: registered new interface driver ums-freecom
[ 1.165870] usbcore: registered new interface driver ums-isd200
[ 1.165891] usbcore: registered new interface driver ums-jumpshot
[ 1.165911] usbcore: registered new interface driver ums-karma
[ 1.165932] usbcore: registered new interface driver ums-onetouch
[ 1.165965] usbcore: registered new interface driver ums-realtek
[ 1.165987] usbcore: registered new interface driver ums-sddr09
[ 1.166039] usbcore: registered new interface driver ums-sddr55
[ 1.166060] usbcore: registered new interface driver ums-usbat
[ 1.166141] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.166144] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.166883] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.167109] mousedev: PS/2 mouse device common for all mice
[ 1.167451] rtc_cmos 00:01: RTC can wake from S4
[ 1.167660] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.167703] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[ 1.167729] IR Sharp protocol handler initialized
[ 1.167774] platform eisa.0: Probing EISA bus 0
[ 1.167779] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.167783] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.167788] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.167792] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.167796] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.167800] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.167804] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.167808] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.167812] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.167816] platform eisa.0: EISA: Detected 0 cards
[ 1.167837] sdhci: Secure Digital Host Controller Interface driver
[ 1.167839] sdhci: Copyright(c) Pierre Ossman
[ 1.167907] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 1.167909] wbsd: Copyright(c) Pierre Ossman
[ 1.167987] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 1.168226] usbcore: registered new interface driver vub300
[ 1.168473] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.168528] usbcore: registered new interface driver usbhid
[ 1.168530] usbhid: USB HID core driver
[ 1.168682] TCP: cubic registered
[ 1.168686] NET: Registered protocol family 17
[ 1.168933] Using IPI No-Shortcut mode
[ 1.169119] registered taskstats version 1
[ 1.169670] rtc_cmos 00:01: setting system clock to 2014-06-14 00:25:51 UTC (1402705551)
[ 1.169687] ALSA device list:
[ 1.169689] No soundcards found.
[ 1.192956] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.346294] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL01, max UDMA/66
[ 1.346510] ata3.01: ATA-6: ST3160021A, 8.01, max UDMA/100
[ 1.346514] ata3.01: 312581808 sectors, multi 16: LBA48
[ 1.346525] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c60000) ACPI=0x1f01f (30:20:0x15)
[ 1.346531] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc5c60000) ACPI=0x3f01f (30:20:0x15)
[ 1.352242] ata3.00: configured for UDMA/66
[ 1.358419] ata3.01: configured for UDMA/100
[ 1.417640] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.468036] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 1.633027] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 1.741427] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.755373] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 1.755416] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL01 PQ: 0 ANSI: 5
[ 1.755591] scsi4 : usb-storage 1-6:1.0
[ 1.783697] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.783702] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.783922] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.785870] scsi 2:0:1:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
[ 1.786231] sd 2:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.786302] sd 2:0:1:0: [sda] Write Protect is off
[ 1.786306] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.786338] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.786644] ata4: port disabled--ignoring
[ 1.793051] sda: sda1
[ 1.793434] sd 2:0:1:0: [sda] Attached SCSI disk
[ 1.793822] Freeing unused kernel memory: 504K (c1584000 - c1602000)
[ 1.858043] usb 1-7: new high-speed USB device number 5 using ehci-pci
[ 1.972044] usb 1-7: device descriptor read/64, error -71
[ 2.187056] usb 1-7: device descriptor read/64, error -71
[ 2.756951] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.758701] scsi 4:0:0:1: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.760986] scsi 4:0:0:2: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.761955] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.764064] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 2.765553] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 2.907065] usb 1-5: new high-speed USB device number 8 using ehci-pci
[ 3.335053] usb 2-3: new low-speed USB device number 2 using ohci-pci
[ 3.537866] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:046D:C03D.0001/input/input3
[ 3.538139] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3/input0
[ 3.601159] random: nonblocking pool is initialized
[ 3.799045] usb 2-7: new full-speed USB device number 3 using ohci-pci
[ 3.978057] usb 2-7: not running at top speed; connect to a high speed hub
[ 3.999836] usb-storage 2-7:1.0: USB Mass Storage device detected
[ 3.999994] scsi5 : usb-storage 2-7:1.0
[ 4.261048] usb 2-8: new full-speed USB device number 4 using ohci-pci
[ 4.426091] usb 2-8: device descriptor read/64, error -62
[ 4.692054] usb 2-8: device descriptor read/64, error -62
[ 4.950049] usb 2-8: new full-speed USB device number 5 using ohci-pci
[ 5.011077] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ 5.022070] sd 5:0:0:0: [sde] 15356160 512-byte logical blocks: (7.86 GB/7.32 GiB)
[ 5.029099] sd 5:0:0:0: [sde] Write Protect is off
[ 5.029107] sd 5:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 5.036175] sd 5:0:0:0: [sde] No Caching mode page found
[ 5.036182] sd 5:0:0:0: [sde] Assuming drive cache: write through
[ 5.128950] sde: sde1
[ 5.130786] usb 2-8: device descriptor read/64, error -62
[ 5.165081] sd 5:0:0:0: [sde] Attached SCSI removable disk
[ 5.437051] usb 2-8: device descriptor read/64, error -62
[ 5.698080] usb 2-8: new full-speed USB device number 6 using ohci-pci
[ 6.053955] udevd[1248]: starting version 182
[ 6.127448] usb 2-8: device not accepting address 6, error -62
[ 6.309044] usb 2-8: new full-speed USB device number 7 using ohci-pci
[ 6.715046] usb 2-8: device not accepting address 7, error -62
[ 6.715122] hub 2-0:1.0: unable to enumerate USB device on port 8
[ 6.921047] usb 1-5: new high-speed USB device number 9 using ehci-pci
[ 7.244058] usb 1-5: new high-speed USB device number 10 using ehci-pci
[ 7.600068] usb 1-5: new high-speed USB device number 11 using ehci-pci
[ 8.034050] usb 2-5: new full-speed USB device number 8 using ohci-pci
wifislax ~ #
