Seguridad Wireless - Wifi

Sistemas operativos => Otros sistemas y plataformas => Mensaje iniciado por: ALBANO en 04-07-2009, 15:47 (Sábado)

Título: rtl8187 en mac leopard (solucionado)
Publicado por: ALBANO en 04-07-2009, 15:47 (Sábado)
hola , sabeis si hay alguna forma de instalar la alfa500 en mac leopard , he probado con un mogollon de drivers y no lo consigo, me dice "activa la wlan card en system preferences , network...
me voy alli y no la encuentro por ninguna parte , solo me funciona la broadcom interna...
Saludos
Título: Re: rtl8187 en mac leopard
Publicado por: chinitiw en 04-07-2009, 16:13 (Sábado)
has probado a utilizar los drivers de la página de Realtek , me refiero a los ultimos , he instalado la gold 800 con el mismo chipset en un G5 y sin problemas, eso si por si las moscas los dos usb enchufados a los usb del mac , no a unhub usb

saludos
Título: Re: rtl8187 en mac leopard
Publicado por: ALBANO en 04-07-2009, 17:19 (Sábado)
a cual te refieres chinitiw ,   al rtl8187B al L , o al rtl8187 ? podrias poner el enlace al archivo , no? Saludos  ??? ???
Título: Re: rtl8187 en mac leopard
Publicado por: Scaevolam en 05-07-2009, 00:11 (Domingo)
Estas en un IMac? Si has enchufado uno de los usb al teclado, creo que estos son 1,0 y los de atras del Mac son 2,0... Podria ser eso! Suerte!
Título: Re: rtl8187 en mac leopard (soluccionado)
Publicado por: ALBANO en 05-07-2009, 10:57 (Domingo)
para la alfa 500mw funciona con este driver, para inyectar hay que instalar el rtl8187B...
http://www.realtek.com.tw/downloads/downlo...s=true#RTL8187L
hay que hacer lo siguiente para conectarse con la alfa....
Advice:
Before you install it make sure you don't have the previous versions installed and Rename your working interfaces to something like "Marvel Yukon #1" and #2 or so...

1.- Run the installer, then reboot.
Takes a while to the "Realtek USB WLAN Configuration Utility" to load!!!!

2.- Ok, a new restart will help you and is needed because the System Preferences, Network, is at first a little unstable with the new "Realtek USB WLAN Configuration Utility".

3.- After restarting... And waiting on "Realtek USB WLAN Configuration Utility" to finish loading, open the System Preferences, Network then click on the "+" to add a "New Service", On Interfaces select the 3rd "Ethernet" then click on Create

After creating the service, it will get an IP automatically... it's wrong, but, it's ok!

4.- Rename your service to someting like "USB WiFi Solo" and go to "Realtek USB WLAN Configuration Utility" to the "Available Network" tab and pick your network, then "Add to Profile" type in your info and viola!

You're connected!!!

And if you have your sleep working, after a wake up! I was connected, still......., en fin que te reconoce la alfa como ethenet  pero funciona como wifi  ... saludos ;D ;D
Título: Re: rtl8187 en mac leopard (solucionado)
Publicado por: danielniel en 24-10-2009, 07:15 (Sábado)
hay drivers para snow leopard? yo consegui hacerla funcionar en leopard 10.5.8 pero al pasar a snowleopard no hay manera de echarla a andar