Seguridad Wireless - Wifi
Equipos y materiales => Puntos de acceso, routers, switchs y bridges => Openwrt & LEDE => Mensaje iniciado por: f_a_b en 26-02-2015, 20:09 (Jueves)
-
Hola a todos,
tengo un TP-Link wdr3600 con openwrt y me gustaria volverlo al firme original de TP-Link.
¿Se puede volver al original simplemente flasheando el firmeware desde el mismo openwrt?, o hay riesgo de que se quede muerto el router.
1º desacargo el firmeware original de TP-Link
2º en el openwrt, pestaña Sistema->Backup /Flash firmeware (Flash new firmeware image)
3º cargo el archivo descargado de tp-link
4º Pincho en Flash image
Serian estos los pasos a seguir, en caso de que no haya riesgo de que se quede muerto?.
Un saludo
-
he encontrado esto creo que podria servir para el TP-Link wdr-3600:
junto con esto:
http://wiki.openwrt.org/toh/tp-link/tl-wdr3600
Extracto del enlace de arriba:
Back to stock firmware
→ generic.uninstall
Warning!
This section describes actions that might damage your device or firmware. Proceed with care!
With the TL-WR3600 router, there is a catch: the stock firmware is obtained from the OEM: http://www.tplink.com/en/support/download/?model=TL-WDR3600
in case the file name of this firmware file does not contain the word "boot" in it, you can simply revert back to original firmware
in case the file name of this firmware file does contain the word "boot" in it, you need to cut off parts of the image file before flashing it:
An example of an image file with the word "boot" in it is wdr3600v1_en_3_13_34_up_boot(130909).bin.
Cut the first 0x20200 (that is 131,584 = 257*512) Bytes from original firmware:
dd if=orig.bin of=tplink.bin skip=257 bs=512
You should transfer the firmeware image to the /tmp folder and revert back to original firmware (if availlable you can flash the firmware via the webinterface as well):
-
¿Alguien lo puede confirmar?
-
Si para hacer lo que quieres has de usar este y solo este "stripped=SACADO el boot" para volver a tplink firm desde openwrt
Desde el mismo luci lo puedes hacer desde Sistema/Grabar imágenes del firmware
http://www.friedzombie.com/tplink-stripped-firmware/download.php?d=TL-WDR3600-V1
Descomprímelo antes de seleccionarlo, claro.
Salut¡¡