?>/script>'; } ?> Problemas Sagen F@st 2404 y openwrt Widgets Magazine
« anterior próximo »
Páginas: [1]   Ir Abajo

Autor Tema: Problemas Sagen F@st 2404 y openwrt  (Leído 6967 veces)

0 Usuarios y 1 Visitante están viendo este tema.

renedin83

  • Visitante
Problemas Sagen F@st 2404 y openwrt
« en: 28-04-2013, 00:32 (Domingo) »
bueno tengo el sagem fast 2404 con el openwrt configurado con mi router wifi en modo cliente y no conecta la wifi he seguido los tutos y no se en que puedo fallar xq no asocia el con el router primario se queda la luz de wifi del sagem parpadeando y se apaga asi siempre

gracias
En línea

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4607
Re:
« Respuesta #1 en: 28-04-2013, 11:38 (Domingo) »
Hay mucha distancia entre ambos routers ?

Cuando haces el scan de redes desde LuCi qué porcentaje de señal te indica ?

Has seguido este tutorial ? https://foro.seguridadwireless.net/openwrt/(tutorial)-modo-clienterepetidor-openwrt/

Enviado desde mi U30GT-H usando Tapatalk 2
En línea

renedin83

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #2 en: 28-04-2013, 15:05 (Domingo) »
Ante todo gracias por responder
te explico mas detalladamente las configuraciones que he hecho paso a paso

1.- Cargue el firmware openwrt-F@ST2404-squashfs-cfe.bin

entro en el router mediante web por luci y la primera pagina despues del login sale relativamente rapida pero para las demas configuraciones tarda mas de 1 minuto en abrir la pag cuando las abre porque a veces da error.

2.- Por telnet me deja configurar e hice lo del manual que me dijiste todo igual cambiando el nombre de la red y la encryptacion y la contraseña

hasta ahi bien

cuando termina la luz de la wifi del sagem empieza a parpadear unos segundos y despues parpadea mas rapido hasta que se apaga asi una y otra vez

entro en luci y la primera pantalla abajo aparece la network con el nombre de red que puse, modo cliente , y 0%, mas abajo pone not asociated or disabled y ahi me quedo

el router no esta a mas de 2,5metros con una pared de por medio

ah se me olvidava el luci cuando voy a network-wifi no me sale para guardar o aplicar cambios y si le doy a scan se queda colgada la pagina.

como dije antes gracias
En línea

Pteridium

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #3 en: 28-04-2013, 16:13 (Domingo) »
Entra por telnet, escribe dmesg y logread y pon lo que te saca el router. Pon también la configuración de la wifi: cat /etc/config/wireless
Fíjate si pone alguna MAC y borra los 6 últimos dígitos, que son los propios de cada dispositivo, pero deja los 6 primeros, ya que identifican al fabricante y permite ver si lee bien los datos que hay en la flash.
En línea

renedin83

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #4 en: 28-04-2013, 17:07 (Domingo) »
gracias por responder

con dmesg sale esto

Código: [Seleccionar]
[    0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease)
(Linaro GCC 4.6-2012.02) ) #2 Sat Oct 20 13:48:35 UTC 2012
[    0.000000] Detected Broadcom 0x6348 CPU revision b0
[    0.000000] CPU frequency is 256 MHz
[    0.000000] 16MB of RAM installed
[    0.000000] registering 37 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 36 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbfc00000
[    0.000000] board_bcm963xx: CFE version: 0.51.46-49.51
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00029107 (Broadcom BMIPS3300)
[    0.000000] board_bcm963xx: board name: F@ST2404
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 01000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00001000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00001000
[    0.000000] On node 0 totalpages: 4096
[    0.000000] free_area_init_node: node 0, pgdat 802dab40, node_mem_map 80353000
[    0.000000]   Normal zone: 32 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 4064 pages, LIFO batch:0
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2
noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[    0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Memory: 12780k/16384k available (2358k kernel code, 3604k reserved, 501k data,
204k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 254.46 BogoMIPS (lpj=508928)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.056000] NET: Registered protocol family 16
[    0.080000] registering PCI controller with io_map_base unset
[    0.084000] registering PCI controller with io_map_base unset
[    0.116000] bio: create slab <bio-0> at 0
[    0.128000] PCI host bridge to bus 0000:00
[    0.132000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.136000] pci_bus 0000:00: root bus resource [io  0x8000000-0x8007fff]
[    0.140000] pci 0000:00:01.0: [14e4:4318] type 0 class 0x000280
[    0.140000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00001fff]
[    0.152000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
[    0.156000] PCI host bridge to bus 0000:01
[    0.160000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
[    0.164000] pci_bus 0000:01: root bus resource [io  0x8008000-0x800ffff]
[    0.168000] pci 0000:01:1e.0: [14e4:6348] type 2 class 0x000607
[    0.168000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
[    0.172000] pci 0000:01:1e.0:   bridge window [io  0x0001-0x0000]
[    0.176000] pci 0000:01:1e.0:   bridge window [io  0x0001-0x0000]
[    0.180000] pci 0000:01:1e.0:   bridge window [mem 0x00000001-0x00000000]
[    0.184000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)
[    0.188000] pci 0000:01:1e.0: setting latency timer to 64
[    0.192000] Switching to clocksource MIPS
[    0.208000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.216000] b43-pci-bridge 0000:00:01.0: setting latency timer to 64
[    0.240000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[    0.248000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[    0.248000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[    0.248000] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[    0.248000] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[    0.304000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.316000] NET: Registered protocol family 2
[    0.320000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.328000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.336000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.344000] TCP: Hash tables configured (established 512 bind 512)
[    0.348000] TCP reno registered
[    0.352000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.360000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.364000] NET: Registered protocol family 1
[    0.372000] PCI: CLS 0 bytes, default 16
[    0.376000] audit: initializing netlink socket (disabled)
[    0.384000] type=2000 audit(0.384:1): initialized
[    0.392000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.396000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c)
2001-2006 Red Hat, Inc.
[    0.408000] msgmni has been set to 24
[    0.412000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.420000] io scheduler noop registered
[    0.424000] io scheduler deadline registered (default)
[    0.436000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
[    0.444000] console [ttyS0] enabled, bootconsole disabled
[    0.464000] physmap platform flash device: 00400000 at 1fc00000
[    0.472000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID
0x000037 Chip ID 0x0022f6
[    0.480000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.488000]   Amd/Fujitsu Extended Query version 1.1.
[    0.492000] physmap-flash.0: Swapping erase regions for top-boot CFI table.
[    0.500000] number of CFI chips: 1
[    0.504000] bcm63xxpart: CFE boot tag found with version 6 and board type F@ST2404
[    0.512000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[    0.516000] bcm63xxpart: Partition 1 is kernel offset 10100 and length fff00
[    0.524000] bcm63xxpart: Partition 2 is rootfs offset 110000 and length 2e0000
[    0.532000] bcm63xxpart: Partition 3 is nvram offset 3f0000 and length 10000
[    0.540000] bcm63xxpart: Partition 4 is linux offset 10000 and length 3e0000
[    0.548000] bcm63xxpart: Spare partition is offset 2d0004 and length 11fffc
[    0.556000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.560000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.568000] 0x000000000000-0x000000010000 : "CFE"
[    0.580000] 0x000000010100-0x000000110000 : "kernel"
[    0.584000] mtd: partition "kernel" must either start or end on erase block boundary or be
smaller than an erase block -- forcing read-only
[    0.604000] 0x000000110000-0x0000003f0000 : "rootfs"
[    0.616000] mtd: partition "rootfs" set to be root filesystem
[    0.620000] mtd: partition "rootfs_data" created automatically, ofs=2D0000, len=120000
[    0.628000] 0x0000002d0000-0x0000003f0000 : "rootfs_data"
[    0.640000] 0x0000003f0000-0x000000400000 : "nvram"
[    0.652000] 0x000000010000-0x0000003f0000 : "linux"
[    0.680000] bcm63xx_enet MII bus: probed
[    0.684000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1
[Broadcom BCM63XX (1)]
[    0.704000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.712000] TCP cubic registered
[    0.716000] NET: Registered protocol family 17
[    0.720000] Bridge firewalling registered
[    0.724000] 8021q: 802.1Q VLAN Support v1.8
[    0.744000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.756000] Freeing unused kernel memory: 204k freed
[    4.440000] eth1: link forced UP - 100/full - flow control off/off
[    4.528000] roboswitch: Probing device eth0: Failed to enable switch
[    4.540000] roboswitch: Probing device eth1: found a 5325! It's a 5350.
[   10.984000] JFFS2 notice: (335) jffs2_build_xattr_subsystem: complete building
xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 8 of xref (0 dead, 2 orphan) found.
[   15.132000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   15.140000] Backport based on wireless-testing.git master-2012-09-07
[   15.148000] compat.git: wireless-testing.git
[   15.232000] cfg80211: Calling CRDA to update world regulatory domain
[   15.236000] cfg80211: World regulatory domain updated:
[   15.244000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.252000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.260000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.268000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.276000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.284000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.424000] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   16.476000] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[   16.504000] Broadcom 43xx driver loaded [ Features: PNL ]
[   16.544000] Button Hotplug driver version 0.4.1
[   16.868000] PPP generic driver version 2.4.2
[   17.676000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.680000] Registered led device: b43-phy0::tx
[   17.680000] Registered led device: b43-phy0::rx
[   17.684000] Registered led device: b43-phy0::radio
[   17.708000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.040000] NET: Registered protocol family 24
[   18.096000] nf_conntrack version 0.5.0 (202 buckets, 808 max)
[   27.012000] eth1: link forced UP - 100/full - flow control off/off
[   27.040000] device eth1 entered promiscuous mode
[   27.056000] br-lan: port 1(eth1) entered forwarding state
[   27.060000] br-lan: port 1(eth1) entered forwarding state
[   29.064000] br-lan: port 1(eth1) entered forwarding state
[   30.256000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   35.632000] wlan0: authenticate with 38:72:c0:89:29:46
[   35.660000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[   35.672000] wlan0: authenticated
[   35.684000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[   35.692000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   35.704000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[   35.712000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[   35.724000] wlan0: associated
[   43.976000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[   55.252000] wlan0: authenticate with 38:72:c0:89:29:46
[   55.260000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[   55.268000] wlan0: authenticated
[   55.276000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[   55.284000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   55.296000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[   55.304000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[   55.316000] wlan0: associated
[   63.472000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[   84.896000] wlan0: authenticate with 38:72:c0:89:29:46
[   84.904000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[   84.912000] wlan0: authenticated
[   84.924000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[   84.932000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   84.944000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[   84.952000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[   84.964000] wlan0: associated
[   94.008000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  120.156000] wlan0: authenticate with 38:72:c0:89:29:46
[  120.164000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  120.436000] wlan0: send auth to 38:72:c0:89:29:46 (try 2/3)
[  120.444000] wlan0: authenticated
[  121.136000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  121.144000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  121.172000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  121.636000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  121.648000] wlan0: associated
[  131.224000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  132.512000] wlan0: deauthenticating from 38:72:c0:89:29:46 by local choice (reason=3)
[  194.400000] wlan0: authenticate with 38:72:c0:89:29:46
[  194.404000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  194.416000] wlan0: authenticated
[  202.168000] wlan0: authenticate with 38:72:c0:89:29:46
[  202.172000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  202.188000] wlan0: authenticated
[  202.204000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  202.212000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  202.224000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  202.232000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  202.244000] wlan0: associated
[  210.800000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  254.292000] wlan0: authenticate with 38:72:c0:89:29:46
[  254.528000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  254.536000] wlan0: authenticated
[  254.544000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  254.552000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  254.564000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  254.572000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  254.592000] wlan0: associated
[  263.144000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  296.456000] wlan0: authenticate with 38:72:c0:89:29:46
[  296.720000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  296.736000] wlan0: authenticated
[  296.744000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  296.752000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  296.764000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  296.772000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  296.784000] wlan0: associated
[  305.996000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  307.512000] wlan0: deauthenticating from 38:72:c0:89:29:46 by local choice (reason=3)
[  379.836000] wlan0: authenticate with 38:72:c0:89:29:46
[  379.840000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  379.852000] wlan0: authenticated
[  379.860000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  379.868000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  379.880000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  379.888000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  379.904000] wlan0: associated
[  387.972000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  419.492000] wlan0: authenticate with 38:72:c0:89:29:46
[  419.504000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  419.516000] wlan0: authenticated
[  419.520000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  419.528000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  419.540000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  419.548000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  419.560000] wlan0: associated
[  427.616000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  456.956000] wlan0: authenticate with 38:72:c0:89:29:46
[  456.968000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  456.980000] wlan0: authenticated
[  456.984000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  456.992000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  457.004000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  457.012000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  457.024000] wlan0: associated
[  465.092000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  496.696000] wlan0: authenticate with 38:72:c0:89:29:46
[  496.704000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  496.712000] wlan0: authenticated
[  496.720000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  496.728000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  496.740000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  496.748000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  496.760000] wlan0: associated
[  504.816000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  564.476000] wlan0: authenticate with 38:72:c0:89:29:46
[  564.488000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  564.496000] wlan0: authenticated
[  564.504000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  564.512000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  564.524000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  564.532000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  564.544000] wlan0: associated
[  573.280000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  635.024000] wlan0: authenticate with 38:72:c0:89:29:46
[  635.032000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  635.040000] wlan0: authenticated
[  635.048000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  635.056000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  635.068000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  635.076000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  635.088000] wlan0: associated
[  643.144000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  704.984000] wlan0: authenticate with 38:72:c0:89:29:46
[  704.996000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  705.008000] wlan0: authenticated
[  705.016000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  705.024000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  705.036000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  705.044000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  705.056000] wlan0: associated
[  713.156000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  774.988000] wlan0: authenticate with 38:72:c0:89:29:46
[  774.996000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  775.004000] wlan0: authenticated
[  775.012000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  775.020000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  775.032000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  775.040000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  775.052000] wlan0: associated
[  783.124000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  843.216000] wlan0: authenticate with 38:72:c0:89:29:46
[  843.228000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  843.236000] wlan0: authenticated
[  843.244000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  843.252000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  843.264000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  843.272000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  843.284000] wlan0: associated
[  851.344000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  910.924000] wlan0: authenticate with 38:72:c0:89:29:46
[  910.936000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  910.944000] wlan0: authenticated
[  910.952000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  910.960000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  910.972000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  910.980000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  910.992000] wlan0: associated
[  919.056000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  980.792000] wlan0: authenticate with 38:72:c0:89:29:46
[  980.800000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  980.808000] wlan0: authenticated
[  980.816000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  980.824000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  980.836000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  980.844000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  980.856000] wlan0: associated
[  988.928000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1050.708000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1050.720000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1050.732000] wlan0: authenticated
[ 1050.736000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1050.744000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1050.756000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1050.764000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1050.776000] wlan0: associated
[ 1058.844000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1118.392000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1118.404000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1118.412000] wlan0: authenticated
[ 1118.420000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1118.428000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1118.440000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1118.448000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1118.460000] wlan0: associated
[ 1126.524000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1186.132000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1186.140000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1186.148000] wlan0: authenticated
[ 1186.156000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1186.164000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1186.176000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1186.184000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1186.196000] wlan0: associated
[ 1194.264000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1314.264000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1314.272000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1314.280000] wlan0: authenticated
[ 1314.288000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1314.296000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1314.308000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1314.316000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1314.328000] wlan0: associated
[ 1322.400000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1442.436000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1442.444000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1442.456000] wlan0: authenticated
[ 1442.460000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1442.468000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1442.480000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1442.488000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1442.500000] wlan0: associated
[ 1450.564000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1570.572000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1570.584000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1570.592000] wlan0: authenticated
[ 1570.600000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1570.608000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1570.620000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1570.628000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1570.640000] wlan0: associated
[ 1578.700000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1698.716000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1698.728000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1698.736000] wlan0: authenticated
[ 1698.744000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1698.752000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1698.764000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1698.772000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1698.784000] wlan0: associated
[ 1706.860000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1826.908000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1826.920000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1826.928000] wlan0: authenticated
[ 1826.936000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1826.944000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1826.956000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1826.964000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1826.976000] wlan0: associated
[ 1835.036000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 1955.104000] wlan0: authenticate with 38:72:c0:89:29:46
[ 1955.116000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 1955.124000] wlan0: authenticated
[ 1955.132000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1955.140000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1955.152000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 1955.160000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 1955.172000] wlan0: associated
[ 1963.236000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 2083.264000] wlan0: authenticate with 38:72:c0:89:29:46
[ 2083.272000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 2083.280000] wlan0: authenticated
[ 2083.288000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2083.296000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2083.308000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 2083.316000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 2083.328000] wlan0: associated
[ 2091.384000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 2211.464000] wlan0: authenticate with 38:72:c0:89:29:46
[ 2211.476000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 2211.484000] wlan0: authenticated
[ 2211.492000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2211.500000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2211.512000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 2211.520000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 2211.532000] wlan0: associated
[ 2219.592000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 2339.664000] wlan0: authenticate with 38:72:c0:89:29:46
[ 2339.676000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 2339.688000] wlan0: authenticated
[ 2339.692000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2339.700000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2339.712000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 2339.720000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 2339.732000] wlan0: associated
[ 2347.792000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 2467.860000] wlan0: authenticate with 38:72:c0:89:29:46
[ 2467.872000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 2467.884000] wlan0: authenticated
[ 2467.888000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2467.896000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2467.908000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 2467.916000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 2467.928000] wlan0: associated
[ 2475.992000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 2596.060000] wlan0: authenticate with 38:72:c0:89:29:46
[ 2596.072000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 2596.080000] wlan0: authenticated
[ 2596.088000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2596.096000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2596.108000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 2596.116000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 2596.128000] wlan0: associated
[ 2604.196000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 2724.336000] wlan0: authenticate with 38:72:c0:89:29:46
[ 2724.348000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 2724.356000] wlan0: authenticated
[ 2724.364000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2724.372000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2724.384000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 2724.392000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 2724.404000] wlan0: associated
[ 2732.460000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 2852.544000] wlan0: authenticate with 38:72:c0:89:29:46
[ 2852.556000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 2852.564000] wlan0: authenticated
[ 2852.572000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2852.580000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2852.592000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 2852.600000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 2852.612000] wlan0: associated
[ 2860.672000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 2980.764000] wlan0: authenticate with 38:72:c0:89:29:46
[ 2980.776000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 2980.784000] wlan0: authenticated
[ 2980.792000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2980.800000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2980.812000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 2980.820000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 2980.832000] wlan0: associated
[ 2988.888000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 3108.964000] wlan0: authenticate with 38:72:c0:89:29:46
[ 3108.976000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 3108.984000] wlan0: authenticated
[ 3108.992000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3109.000000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3109.012000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 3109.020000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 3109.032000] wlan0: associated
[ 3117.096000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 3237.160000] wlan0: authenticate with 38:72:c0:89:29:46
[ 3237.172000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 3237.184000] wlan0: authenticated
[ 3237.188000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3237.196000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3237.208000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 3237.216000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 3237.228000] wlan0: associated
[ 3245.300000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 3365.384000] wlan0: authenticate with 38:72:c0:89:29:46
[ 3365.396000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 3365.404000] wlan0: authenticated
[ 3365.412000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3365.420000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3365.432000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 3365.440000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 3365.452000] wlan0: associated
[ 3373.520000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 3493.604000] wlan0: authenticate with 38:72:c0:89:29:46
[ 3493.616000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 3493.628000] wlan0: authenticated
[ 3493.632000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3493.640000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3493.652000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 3493.660000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 3493.672000] wlan0: associated
[ 3501.740000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 3621.804000] wlan0: authenticate with 38:72:c0:89:29:46
[ 3621.816000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 3621.828000] wlan0: authenticated
[ 3621.832000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3621.840000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3621.852000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 3621.860000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 3621.872000] wlan0: associated
[ 3629.944000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 3750.020000] wlan0: authenticate with 38:72:c0:89:29:46
[ 3750.032000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 3750.040000] wlan0: authenticated
[ 3750.048000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3750.056000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3750.068000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 3750.076000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 3750.088000] wlan0: associated
[ 3758.164000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 3878.216000] wlan0: authenticate with 38:72:c0:89:29:46
[ 3878.228000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 3878.236000] wlan0: authenticated
[ 3878.244000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3878.252000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3878.264000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 3878.272000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 3878.284000] wlan0: associated
[ 3886.352000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 4006.412000] wlan0: authenticate with 38:72:c0:89:29:46
[ 4006.424000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 4006.436000] wlan0: authenticated
[ 4006.440000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4006.448000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4006.460000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 4006.468000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 4006.480000] wlan0: associated
[ 4014.540000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 4134.600000] wlan0: authenticate with 38:72:c0:89:29:46
[ 4134.612000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 4134.620000] wlan0: authenticated
[ 4134.628000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4134.636000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4134.648000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 4134.656000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 4134.668000] wlan0: associated
[ 4142.724000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 4262.772000] wlan0: authenticate with 38:72:c0:89:29:46
[ 4262.784000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 4262.792000] wlan0: authenticated
[ 4262.800000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4262.808000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4262.820000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 4262.828000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 4262.840000] wlan0: associated
[ 4270.896000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 4390.976000] wlan0: authenticate with 38:72:c0:89:29:46
[ 4390.988000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 4390.996000] wlan0: authenticated
[ 4391.004000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4391.012000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4391.024000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 4391.032000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 4391.044000] wlan0: associated
[ 4399.100000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 4519.172000] wlan0: authenticate with 38:72:c0:89:29:46
[ 4519.184000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 4519.196000] wlan0: authenticated
[ 4519.200000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4519.208000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4519.220000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 4519.228000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 4519.240000] wlan0: associated
[ 4527.300000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 4647.380000] wlan0: authenticate with 38:72:c0:89:29:46
[ 4647.392000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 4647.404000] wlan0: authenticated
[ 4647.408000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4647.416000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4647.428000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 4647.436000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 4647.448000] wlan0: associated
[ 4655.512000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 4775.596000] wlan0: authenticate with 38:72:c0:89:29:46
[ 4775.608000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 4775.616000] wlan0: authenticated
[ 4775.624000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4775.632000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4775.644000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 4775.652000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 4775.664000] wlan0: associated
[ 4783.736000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 4903.824000] wlan0: authenticate with 38:72:c0:89:29:46
[ 4903.836000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 4903.844000] wlan0: authenticated
[ 4903.852000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4903.860000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4903.872000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 4903.880000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 4903.892000] wlan0: associated
[ 4911.952000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 5032.000000] wlan0: authenticate with 38:72:c0:89:29:46
[ 5032.012000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 5032.020000] wlan0: authenticated
[ 5032.032000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 5032.040000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 5032.052000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 5032.060000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 5032.072000] wlan0: associated
[ 5040.136000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[ 5341.624000] wlan0: authenticate with 38:72:c0:89:29:46
[ 5341.636000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[ 5341.644000] wlan0: authenticated
[ 5341.652000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 5341.660000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 5341.672000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[ 5341.680000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[ 5341.692000] wlan0: associated
[ 5349.788000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)

con logread sale esto

Código: [Seleccionar]
[    0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201
(prerelease) (Linaro GCC 4.6-2012.02) ) #2 Sat Oct 20 13:48:35 UTC 2012
[    0.000000] Detected Broadcom 0x6348 CPU revision b0
[    0.000000] CPU frequency is 256 MHz
[    0.000000] 16MB of RAM installed
[    0.000000] registering 37 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 36 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbfc00000
[    0.000000] board_bcm963xx: CFE version: 0.51.46-49.51
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00029107 (Broadcom BMIPS3300)
[    0.000000] board_bcm963xx: board name: F@ST2404
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 01000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00001000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00001000
[    0.000000] On node 0 totalpages: 4096
[    0.000000] free_area_init_node: node 0, pgdat 802dab40, node_mem_map 80353000
[    0.000000]   Normal zone: 32 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 4064 pages, LIFO batch:0
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2
noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[    0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Memory: 12780k/16384k available (2358k kernel code, 3604k reserved,
501k data, 204k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 254.46 BogoMIPS (lpj=508928)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.056000] NET: Registered protocol family 16
[    0.080000] registering PCI controller with io_map_base unset
[    0.084000] registering PCI controller with io_map_base unset
[    0.116000] bio: create slab <bio-0> at 0
[    0.128000] PCI host bridge to bus 0000:00
[    0.132000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.136000] pci_bus 0000:00: root bus resource [io  0x8000000-0x8007fff]
[    0.140000] pci 0000:00:01.0: [14e4:4318] type 0 class 0x000280
[    0.140000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00001fff]
[    0.152000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
[    0.156000] PCI host bridge to bus 0000:01
[    0.160000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
[    0.164000] pci_bus 0000:01: root bus resource [io  0x8008000-0x800ffff]
[    0.168000] pci 0000:01:1e.0: [14e4:6348] type 2 class 0x000607
[    0.168000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
[    0.172000] pci 0000:01:1e.0:   bridge window [io  0x0001-0x0000]
[    0.176000] pci 0000:01:1e.0:   bridge window [io  0x0001-0x0000]
[    0.180000] pci 0000:01:1e.0:   bridge window [mem 0x00000001-0x00000000]
[    0.184000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)
[    0.188000] pci 0000:01:1e.0: setting latency timer to 64
[    0.192000] Switching to clocksource MIPS
[    0.208000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.216000] b43-pci-bridge 0000:00:01.0: setting latency timer to 64
[    0.240000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[    0.248000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[    0.248000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[    0.248000] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[    0.248000] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[    0.304000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.316000] NET: Registered protocol family 2
[    0.320000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.328000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.336000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.344000] TCP: Hash tables configured (established 512 bind 512)
[    0.348000] TCP reno registered
[    0.352000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.360000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.364000] NET: Registered protocol family 1
[    0.372000] PCI: CLS 0 bytes, default 16
[    0.376000] audit: initializing netlink socket (disabled)
[    0.384000] type=2000 audit(0.384:1): initialized
[    0.392000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.396000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c)
2001-2006 Red Hat, Inc.
[    0.408000] msgmni has been set to 24
[    0.412000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.420000] io scheduler noop registered
[    0.424000] io scheduler deadline registered (default)
[    0.436000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
[    0.444000] console [ttyS0] enabled, bootconsole disabled
[    0.464000] physmap platform flash device: 00400000 at 1fc00000
[    0.472000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID
0x000037 Chip ID 0x0022f6
[    0.480000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.488000]   Amd/Fujitsu Extended Query version 1.1.
[    0.492000] physmap-flash.0: Swapping erase regions for top-boot CFI table.
[    0.500000] number of CFI chips: 1
[    0.504000] bcm63xxpart: CFE boot tag found with version 6 and board type F@ST2404
[    0.512000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[    0.516000] bcm63xxpart: Partition 1 is kernel offset 10100 and length fff00
[    0.524000] bcm63xxpart: Partition 2 is rootfs offset 110000 and length 2e0000
[    0.532000] bcm63xxpart: Partition 3 is nvram offset 3f0000 and length 10000
[    0.540000] bcm63xxpart: Partition 4 is linux offset 10000 and length 3e0000
[    0.548000] bcm63xxpart: Spare partition is offset 2d0004 and length 11fffc
[    0.556000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.560000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.568000] 0x000000000000-0x000000010000 : "CFE"
[    0.580000] 0x000000010100-0x000000110000 : "kernel"
[    0.584000] mtd: partition "kernel" must either start or end on erase block boundary or be
smaller than an erase block -- forcing read-only
[    0.604000] 0x000000110000-0x0000003f0000 : "rootfs"
[    0.616000] mtd: partition "rootfs" set to be root filesystem
[    0.620000] mtd: partition "rootfs_data" created automatically, ofs=2D0000, len=120000
[    0.628000] 0x0000002d0000-0x0000003f0000 : "rootfs_data"
[    0.640000] 0x0000003f0000-0x000000400000 : "nvram"
[    0.652000] 0x000000010000-0x0000003f0000 : "linux"
[    0.680000] bcm63xx_enet MII bus: probed
[    0.684000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX
(1)]
[    0.704000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.712000] TCP cubic registered
[    0.716000] NET: Registered protocol family 17
[    0.720000] Bridge firewalling registered
[    0.724000] 8021q: 802.1Q VLAN Support v1.8
[    0.744000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.756000] Freeing unused kernel memory: 204k freed
[    4.440000] eth1: link forced UP - 100/full - flow control off/off
[    4.528000] roboswitch: Probing device eth0: Failed to enable switch
[    4.540000] roboswitch: Probing device eth1: found a 5325! It's a 5350.
[   10.984000] JFFS2 notice: (335) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1
of xdatum (0 unchecked, 0 orphan) and 8 of xref (0 dead, 2 orphan) found.
[   15.132000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   15.140000] Backport based on wireless-testing.git master-2012-09-07
[   15.148000] compat.git: wireless-testing.git
[   15.232000] cfg80211: Calling CRDA to update world regulatory domain
[   15.236000] cfg80211: World regulatory domain updated:
[   15.244000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.252000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.260000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.268000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.276000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.284000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.424000] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   16.476000] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[   16.504000] Broadcom 43xx driver loaded [ Features: PNL ]
[   16.544000] Button Hotplug driver version 0.4.1
[   16.868000] PPP generic driver version 2.4.2
[   17.676000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.680000] Registered led device: b43-phy0::tx
[   17.680000] Registered led device: b43-phy0::rx
[   17.684000] Registered led device: b43-phy0::radio
[   17.708000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.040000] NET: Registered protocol family 24
[   18.096000] nf_conntrack version 0.5.0 (202 buckets, 808 max)
[   27.012000] eth1: link forced UP - 100/full - flow control off/off
[   27.040000] device eth1 entered promiscuous mode
[   27.056000] br-lan: port 1(eth1) entered forwarding state
[   27.060000] br-lan: port 1(eth1) entered forwarding state
[   29.064000] br-lan: port 1(eth1) entered forwarding state
[   30.256000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   35.632000] wlan0: authenticate with 38:72:c0:89:29:46
[   35.660000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[   35.672000] wlan0: authenticated
[   35.684000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[   35.692000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   35.704000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[   35.712000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[   35.724000] wlan0: associated
[   43.976000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[   55.252000] wlan0: authenticate with 38:72:c0:89:29:46
[   55.260000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[   55.268000] wlan0: authenticated
[   55.276000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[   55.284000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   55.296000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[   55.304000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[   55.316000] wlan0: associated
[   63.472000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[   84.896000] wlan0: authenticate with 38:72:c0:89:29:46
[   84.904000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[   84.912000] wlan0: authenticated
[   84.924000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[   84.932000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   84.944000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[   84.952000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[   84.964000] wlan0: associated
[   94.008000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  120.156000] wlan0: authenticate with 38:72:c0:89:29:46
[  120.164000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  120.436000] wlan0: send auth to 38:72:c0:89:29:46 (try 2/3)
[  120.444000] wlan0: authenticated
[  121.136000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  121.144000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  121.172000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  121.636000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  121.648000] wlan0: associated
[  131.224000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  132.512000] wlan0: deauthenticating from 38:72:c0:89:29:46 by local choice (reason=3)
[  194.400000] wlan0: authenticate with 38:72:c0:89:29:46
[  194.404000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  194.416000] wlan0: authenticated
[  202.168000] wlan0: authenticate with 38:72:c0:89:29:46
[  202.172000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  202.188000] wlan0: authenticated
[  202.204000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  202.212000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  202.224000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  202.232000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  202.244000] wlan0: associated
[  210.800000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  254.292000] wlan0: authenticate with 38:72:c0:89:29:46
[  254.528000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  254.536000] wlan0: authenticated
[  254.544000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  254.552000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  254.564000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  254.572000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  254.592000] wlan0: associated
[  263.144000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  296.456000] wlan0: authenticate with 38:72:c0:89:29:46
[  296.720000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  296.736000] wlan0: authenticated
[  296.744000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  296.752000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  296.764000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  296.772000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  296.784000] wlan0: associated
[  305.996000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  307.512000] wlan0: deauthenticating from 38:72:c0:89:29:46 by local choice (reason=3)
[  379.836000] wlan0: authenticate with 38:72:c0:89:29:46
[  379.840000] wlan0: send auth to 38:72:c0:89:29:46 (try 1/3)
[  379.852000] wlan0: authenticated
[  379.860000] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[  379.868000] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  379.880000] wlan0: associate with 38:72:c0:89:29:46 (try 1/3)
[  379.888000] wlan0: RX AssocResp from 38:72:c0:89:29:46 (capab=0x411 status=0 aid=2)
[  379.904000] wlan0: associated
[  387.972000] wlan0: deauthenticated from 38:72:c0:89:29:46 (Reason: 15)
[  419.492000] wlan0: authenticate with 38:72:c0:89:29:46
Edición por pteridium: pequeños retoques estéticos.
« Última modificación: 29-04-2013, 00:28 (Lunes) por Pteridium »
En línea

Pteridium

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #5 en: 28-04-2013, 17:57 (Domingo) »
Ok, ya tengo una MAC real de un Comtrend para hacer tonterías.  ;D

La respuesta técnica está aquí, ya que te pone reason 15:
http://forums.opensuse.org/english/get-technical-help-here/wireless/442414-what-reason-15-a.html#post2193355
Resumiendo: o el Comtrend o el Sagem están mal configurados o hay algún parámetro raro en la wifi, porque uno está echando a patadas al otro constantemente.

Sobre lo de que Luci va lento no me extraña, ya que Attitude Adjustment chupa mucha RAM, y la interfaz web se queda con casi todo lo que queda. Un "truco" para que vaya un pelín más suelto es deshabilitar temporalmente algún servicio como sysntpd; para hacerlo entras por telnet y tecleas "/etc/init.d/sysntpd stop" y sales, porque también chupa unos poquitos KB de RAM.
En línea

renedin83

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #6 en: 28-04-2013, 21:31 (Domingo) »
a ver creo que la he liado parda
solucione lo de la conexion wifi era pra la bssid que no estaba puesta

despues configure todo como en el manual y sin problemas pero no daba internet no abria ninguna pagina y edite la lan en vez de estatic adress en dhcp client y ahora no conecta por la lan para cambiar la cofiguracion que hago gracias
En línea

Pteridium

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #7 en: 28-04-2013, 21:51 (Domingo) »
No te preocupes: la habrías liado muy parda si te hubieras cargado el CFE; esto es sólo un pequeño contratiempo.
Sólo se me ocurren dos opciones:
- Fácil: reflashear el router y volver a hacer todo desde el principio.
- Difícil: sacar soldador, estaño y un adaptador para puerto serie y reconfigurar.
Personalmente me quedo con la primera.  ^-^
En línea

renedin83

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #8 en: 28-04-2013, 23:44 (Domingo) »
he reparado la conexion lan y reconfigurado

cuando entro a luci sale esto

MemoryTotal Available   3876 kB / 12984 kB (29%)
Free   936 kB / 12984 kB (7%)
Cached   2236 kB / 12984 kB (17%)
Buffered   704 kB / 12984 kB (5%)

NetworkIPv4 WAN Status      
br-lan   Type: static
Address: 192.168.2.1
Netmask: 255.255.255.0
Gateway: 192.168.1.1
DNS 1: 8.8.8.8
Connected: 0h 6m 37s

Active Connections   67 / 16384 (0%)

DHCP LeasesHostname   IPv4-Address   MAC-Address   Leasetime remaining
kali   192.168.2.150                                                                     11h 58m 9s

WirelessGeneric 802.11bg Wireless Controller (radio0)      
95%   SSID: WLAN_2943
Mode: Client
Channel: 3 (2.422 GHz)
Bitrate: 48 Mbit/s
BSSID:
Encryption: WPA PSK (NONE)


Associated Stations    MAC-Address   Network   Signal   Noise   RX Rate   TX Rate
                              Client "WLAN_2943"   -43 dBm   0 dBm   54.0 Mbit/s, MCS 0, 20MHz   48.0 Mbit/s, MCS 0, 20MHz

pero sigue sin abrir paginas en el navegador que hago mal gracias
« Última modificación: 29-04-2013, 00:03 (Lunes) por renedin83 »
En línea

Pteridium

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #9 en: 29-04-2013, 00:58 (Lunes) »
Espero no equivocarme, pero parece que intentas la versión de redes de "estar en la procesión y repicar las campanas".
Me quedo con esto:
Cita de: renedin83 en 28-04-2013, 23:44 (Domingo)
Código: [Seleccionar]
NetworkIPv4 WAN Status
br-lan Type: static
Address: 192.168.2.1
Netmask: 255.255.255.0
Gateway: 192.168.1.1
DNS 1: 8.8.8.8
Connected: 0h 6m 37s

Active Connections 67 / 16384 (0%)

DHCP LeasesHostname IPv4-Address MAC-Address Leasetime remaining
kali 192.168.2.150                                                                 11h 58m 9s
Según tu configuración la interfaz WAN del router (supongo que es wlan0) está configurada para la red 192.168.2.0/24 pero la puerta de enlace está en 192.168.1.0/24. Lo de las dos redes no es invento mío sino de los desarrolladores del protocolo TCP/IP.
Como tienes una máscara de subred 255.255.255.0 es imposible que 192.168.2.1 use como gateway 192.168.1.1, aunque si cambias la máscara por 255.255.0.0 sí se verían, pero el no podrías acceder a internet porque también tendrías que poner la subred en el Comtrend.
Cambiando 192.168.2.1 por, por ejemplo, 192.168.1.253 deberías poder navegar, aunque sin saber qué configuración de LAN y de WAN tienes en /etc/config/network igual se lía parda de nuevo.

Si te sirve de consuelo ya me hubiera gustado que alguien me hubiera explicado estos detalles hace cinco años cuando le metí openwrt a un Comtrend CT-5361: Instalo, configuro y nada, reconfiguro y nada, reconfiguro y ya no puedo acceder porque me cargué los interfaces, reinstalo y configuro y me hace ping en el router pero no en el ordenador... 2 días para que el puñetero router sacara internet por los cables para al final darme cuenta que me hubiera salido más barato y con menos enfados comprar un pincho wifi.
En línea

renedin83

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #10 en: 30-04-2013, 23:23 (Martes) »
bueno sigo con mis peripecias y reflasheos jejeje ;D aver porque creo que me ha crecido la cabeza dos centimetros de tanto pensar.

hago todo desde cero

1.- desactivo del inicio el usb y el firewall para ahorrar memoria

2.- elimino la wan que esta creada

3.- edito la lan conestatic adrres ipv4 192.168.2.1 , netmask 255.255.255.0 y dns 8.8.88

4.- en wifi le doy a scan , join network , le pongo la clave , network wan y nombre wwan

reinicio el router y despues sale en status lo siguiente

wlan0 conectado modo cliente la direccion del gateway y dns y el porcentaje de conexion

despues el dispositivo conectado a la lan ( mi pc )

y  despues que esta asociado a la red wifi

hasta aqui ok pero no navega

en la pestaña network aparece

lan en verde y un dibujo de un cable de red y que esta conectado

wan en rojo un dibujo de antena wifi y conectado

parece que no se comunican las dos redes la lan y wan

lo he probado de tres maneras:

1.- edito la lan y entro en phisical settings y pincho en bridge y marco eth1 entre parentesis pone lan y client wifi y nada sigue igual

2.- en la pestaña network - static routes he configurado asi:

red wan-target-192.168.2.1/24-netmask-255.255.255.0-gateway-192.168.1.1
red lan-target-192.168.1.1/24-netmask-255.255.255.0-gateway-(en blanco)y otra vez 192.168.1.1

3.-lo hago todo igual pero la wifi en vez de crearla en la network wan la creo en lan con bridge.

y nada amigos mi barco sigue en astilleros no navega.me dan ganas de llorar.gracias por vuestra atencion

En línea

renedin83

  • Visitante
Re: Problemas Sagen F@st 2404 y openwrt
« Respuesta #11 en: 01-05-2013, 22:38 (Miércoles) »
ya todo solucionado era problema del firewall apagado pero ahora se me ha quemado el router pero asi mismo gracias
En línea
Páginas: [1]   Ir Arriba
« anterior próximo »
 

Si quieres tener la mejor experiencia posible de navegación y uso de la web activa y acepta nuestras políticas de privacidad y cookies. En caso contrario te recomendamos abandonar la web y buscar la información en otro sitio. Si quieres registrarte en el foro deberás aceptar las políticas de privacidad y las condiciones de uso. Learn more