Por si interesa.
Bootlog:
[spoiler]
Booting
Press 'ESC' to enter BOOT console...
8M flash ================
Using Int. PHY
0xB8003330=0x0
0xB800332C=0x0
0xB8001000=0xc0000000
0xB8003308=0xf35500
Listening Multicast upgrade packets.... 3210
Decompress primary image... image check addr:0xbd011000 len 3379200
ok!
Linux version 2.6.21.5 (wangzhiquan@build.huawei.com) (gcc version 3.4.6-1.3.6) #3 Tue Aug 10 17:23:57 CST 2010
CPU revision is: 0000ff00
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists. Total pages: 8128
Kernel command line: console=ttyS0, 115200 mem=32M root=31:2
Primary instruction cache 16kB, linesize 16 bytes.
Primary data cache 8kB, linesize 16 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 25828k/32768k available (3456k kernel code, 6940k reserved, 644k data, 120k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... disabled.
bhal: bhalInit entry
MXIC matched!!get SPI chip driver!
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
IP route cache hash table entries: 128 (order: -3, 512 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
fuse init (API version 7.
io scheduler noop registered (default)
Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
netlog start
serial8250: ttyS0 at MMIO 0x0 (irq = 12) is a 16550A
PPP generic driver version 2.4.2
NET: Registered protocol family 24
IMQ starting with 3 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
flash device: 0x1000000 at 0xbd000000
MXIC matched!!get SPI chip driver!
Physically mapped flash: Found an alies 0x800000 for the chip at 0x0, mxic device detect.
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00010000 : "boot"
0x00010000-0x00011000 : "flag"
mtd: partition "flag" doesn't end on an erase block -- force read-only
0x00011000-0x00501000 : "main"
mtd: partition "main" doesn't start on an erase block boundary -- force read-only
0x00501000-0x00530000 : "config"
mtd: partition "config" doesn't start on an erase block boundary -- force read-only
0x00530000-0x00800000 : "slave"
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for option1
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
usbcore: registered new interface driver usbtest
MoniterInit entry
Led_module_init ok<6>REALTEK NIC Ethernet driver v0.1 (Feb 13, 2009)
eth0: RTL-8139C+ at 0xb8018000, 4c:ed:de:35:52:d0, IRQ 26
RTL8672 NIC100 Probing..
eth phy patch done!
Enable 8671G 1 function
Enable 8671 0 function
Enable 8672 function
initFreeRxSkbList
initFreeRxSkbList free_rx_skb_producer=48
ratm: Realtek SAR v1.02 (Feb 17, 2009)
RTL8192C/RTL8188C driver version 0.2 (2010-03-31/2010-05-11)
=====>>INSIDE rtl8192cd_init_one <<=====
Clock source is 35.328MHz
vendor_deivce_id=819110ec
_
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
disable USB phy 0
dwc_otg: version 2.60a 22-NOV-2006
----init hcd-----
DWC_otg: Using DMA mode
DWC_otg: address of dwc_otg_hcd->xacterr_cnt: 0x8112358c
dwc_otg lm0: DWC OTG Controller
dwc_otg lm0: new USB bus registered, assigned bus number 1
dwc_otg lm0: irq 11, io mem 0xb8030000
DWC_otg: Init: Port Power? op_state=1
DWC_otg: Init: Power Port (0)
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
GACT probability on
Mirror/redirect action on
u32 classifier
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (256 buckets, 2048 max)
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_time loading
TCP cubic registered
fastpath init(1020304 5060708)...
Realtek SD2-FastPath v1.00beta_2.4.26-uc0
/proc/FastPath created
Realtek MCast FastPath
/proc/mc_FastPath created
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 120k freed
init started: BusyBox vv1.9.1 (2010-08-10 17:24:50 CST)
starting pid 123, tty '': '/etc/init.d/rcS'
rcs
RCS DONE
starting pid 126, tty '': '/bin/sh'
BusyBox vv1.9.1 (2010-08-10 17:24:50 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
Start mic now ...
load cfm ok.
start log proc...
ADSL FirmwareVersion : 2.9.0.83
ADSL DRV: version : 2.9.0.83
ifconfig: SIOCSIFNETMASK: Cannot assign requested address
InitAdslMode....
InitAdsl
RTL: Adsl DOWN.
RTL: Adsl DOWN.
RTL: Adsl DOWN.
ratm(itf 0): open 8.35
create: ch0 (8/35) 7679,0
sar_set_atm_data_mode
initFreeRxSkbList
initFreeRxSkbList free_rx_skb_producer=48
Enable 8671G 1 function
Enable 8671 0 function
Enable 8672 function
create: ch0 (8/35) 7679,0
applying workaround...done
Use default bin /var/cwmp now ...
device wl0 is not a slave of br0
device wl0.1 is not a slave of br0
device wl0.2 is not a slave of br0
device wl0.3 is not a slave of br0
begin WlanUpInterfaces...
No 0 block_relay=0
acCmd:iwpriv wl0 set_mib qos_enable=1
power = 20,cut=0
begin WlanStartServices...
Interface doesn't accept private ioctl...
89F1: Operation not permitted
device wl0 entered promiscuous mode
_
val=4
===> LoadFirmware()
<=== LoadFirmware()
val=c6
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
device wl0.1 is not a slave of br0
device wl0.2 is not a slave of br0
device wl0.3 is not a slave of br0
begin WlanSetupBridge...
vlan enabled!
device eth0 is not a slave of br0
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 entered promiscuous mode
device eth0.5 entered promiscuous mode
eth0.2: Promiscuous mode enabled.
eth0.2: Promiscuous mode enabled.
br0: port 2(eth0.2) entering learning state
br0: topology change detected, propagating
br0: port 2(eth0.2) entering forwarding state
eth0.2: Promiscuous mode enabled.
eth0.3: Promiscuous mode enabled.
eth0.3: Promiscuous mode enabled.
br0: port 3(eth0.3) entering learning state
br0: topology change detected, propagating
br0: port 3(eth0.3) entering forwarding state
eth0.3: Promiscuous mode enabled.
eth0.4: Promiscuous mode enabled.
eth0.4: Promiscuous mode enabled.
br0: port 4(eth0.4) entering learning state
br0: topology change detected, propagating
br0: port 4(eth0.4) entering forwarding state
eth0.4: Promiscuous mode enabled.
eth0.5: Promiscuous mode enabled.
eth0.5: Promiscuous mode enabled.
br0: port 5(eth0.5) entering learning state
br0: topology change detected, propagating
br0: port 5(eth0.5) entering forwarding state
eth0.5: Promiscuous mode enabled.
device eth0 is not a slave of br0
arp uses obsolete (PF_INET,SOCK_PACKET)
atp: cur kernel version:[2.6.21.5] open /var/umts_sign failed. file[wuapi.c]:line[848].
open /var/umts_sign failed. file[wuapi.c]:line[848].
Card is unknow kind[ATP_SNTP_SetVar 702]---->Notice: current sntp libaray didn't compiled with DST feature.[ATP_SNTP_SetVar 702]---->Notice: current sntp libaray didn't compiled with DST feature.killall: ddnsc: no process killed
Current sntp process is 754!close atm port mirror!
eth0.2: Promiscuous mode enabled.
br0: port 2(eth0.2) entering disabled state
eth0.3: Promiscuous mode enabled.
br0: port 3(eth0.3) entering disabled state
eth0.4: Promiscuous mode enabled.
br0: port 4(eth0.4) entering disabled state
eth0.5: Promiscuous mode enabled.
br0: port 5(eth0.5) entering disabled state
PPP:pppd_ath[2642]:ATH set erro!
PPP:pppd_ath[2645]:ATH set erro!
ppp disconnect ,modem hungup failed
tcgetattr: Inappropriate ioctl for device(25)
sh: -c requires an argument
disconnect script failed
***pppc clear tcp mss
pppc -I ppp257 exit.ifconfig: SIOCSIFFLAGS: Cannot assign requested address
bridge br0:9 doesn't exist; can't delete it
Append upnp ssdp listener ok.
Use default bin /var/upnp now ...
[/spoiler]
