Me suena a router chino con openwrt modificado por el chino. Y eso me lleva a pensar que el único que tiene el código para que eso rule es el chino. No es la primera vez que pasa.
otro usuario de este gran foro me dijo q pusiera unos comandos y pegará el log y esto me arrojo: Connecting to 192.168.5.1 port 22, please wait...
login as:
root@192.168.5.1's password:
BusyBox v1.19.4 (2016-01-28 18:01:31 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______________________________________________
|www.tuoshi.cn |
| _____ ____ _ _ |
| |_ _| _ ___/ ___|| |__ (_) |
| | || | | |/ _ \___ \| '_ \| | |
| | || |_| | (_) |__) | | | | | |
| |_| \__,_|\___/____/|_| |_|_| |
| TS7620N-A V2.5.0 |
|_______________________________________________|
root@Router:~# dmesg
[ 0.000000] Linux version 3.3.8 (tuoshi@ubuntu) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #9 Wed May 18 14:19:47 CST 2016
[ 0.000000] The CPU feqenuce set to 580 MHz, BUS=193 MHz, Uart=40 MHz
[ 0.000000] MIPS CPU sleep mode enabled.
[ 0.000000] PCIE: bypass PCIe DLL.
[ 0.000000] PCIE: Elastic buffer control: Addr:0x68 -> 0xB4
[ 0.000000] disable all power about PCIe
[ 0.000000] PCIE: PLL power down for MT7620N
[ 0.000000] CPU revision is: 00019650 (MIPS 24KEc)
[ 0.000000] CMD:console=ttyS1,57600n8 board=ts7620n
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 803a7bc0, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ts7620n rootfstype=squashfs
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=000642fb
[ 0.000000] Readback ErrCtl register=000642fb
[ 0.000000] Memory: 60800k/65536k available (3331k kernel code, 4736k reserved, 413k data, 164k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:128
[ 0.000000] MTK/Ralink System Tick Counter init... cd:80395f40, m:214748, s:32
[ 0.000000] console [ttyS1] enabled
[ 0.008000] Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
[ 0.048000] pid_max: default: 32768 minimum: 301
[ 0.052000] Mount-cache hash table entries: 512
[ 0.056000] NET: Registered protocol family 16
[ 0.060000] Ralink/MTK BootROM maped.
[ 0.064000] MIPS: machine is ts7620n
[ 0.068000] Ralink Board GPIO_MODE init:
[ 0.072000] I2C:GPIO
[ 0.076000] SPI_REFCLK:GPIO
[ 0.080000] UART_F:GPIO
[ 0.084000] GPIO_MODE_REGs: 0x1a311d
[ 0.088000] Ralink/MTK ILL_ACC driver for MT7620 Board. Copyright 2013 (C) lintel
[ 0.092000] illegal access irq registered.
[ 0.096000] General GPIO Driver for MT7620 Board. Copyright lintel 2005-2013
[ 0.100000] gpiochip_add: registered GPIOs 0 to 23 on device: MT7620-GPIO0
[ 0.104000] gpiochip_add: registered GPIOs 24 to 39 on device: MT7620-GPIO1
[ 0.108000] gpiochip_add: registered GPIOs 40 to 71 on device: MT7620-GPIO2
[ 0.112000] gpiochip_add: registered GPIOs 72 to 95 on device: MT7620-GPIO3
[ 0.212000] MT7620 PPLL unlock
[ 0.220000] bio: create slab at 0
[ 0.224000] Switching to clocksource Ralink external timer
[ 0.228000] NET: Registered protocol family 2
[ 0.240000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.252000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.268000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.280000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.292000] TCP reno registered
[ 0.300000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.308000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.324000] NET: Registered protocol family 1
[ 0.332000] PCI: CLS 0 bytes, default 32
[ 0.332000] Ralink GPIODEV resource maped.
[ 0.340000] RT3xxx EHCI/OHCI init.
[ 0.364000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.376000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZO) (LZMA) (RTIME) (RUBIN) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.400000] msgmni has been set to 118
[ 0.408000] io scheduler noop registered
[ 0.416000] io scheduler deadline registered (default)
[ 0.424000] io scheduler cfq registered
[ 0.432000] Ralink DMA Engine API Enable .
[ 0.440000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.456000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A
[ 0.468000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A
[ 0.484000] Enable Ralink GDMA Controller Module
[ 0.492000] GDMA IP Version=3
[ 0.496000] spidrv_major = 217
[ 0.512000] loop: module loaded
[ 0.520000] deice id : c2 20 17 c2 20 (2017c220)
[ 0.528000] MX25L6405D(c2 2017c220) (8192 Kbytes)
[ 0.536000] mtd .name = raspi, .size = 0x00800000 (0M) .erasesize = 0x00000008 (0K) .numeraseregions = 65536
[ 0.564000] Squashfs filesystem found at offset 0x190000,adjustment mtd partition.
[ 0.580000] Creating 7 MTD partitions on "raspi":
[ 0.588000] 0x000000000000-0x000000030000 : "u-boot"
[ 0.600000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 0.612000] 0x000000040000-0x000000050000 : "Factory"
[ 0.624000] 0x000000050000-0x000000190000 : "kernel"
[ 0.636000] 0x000000190000-0x000000800000 : "rootfs"
[ 0.648000] mtd: partition "rootfs" set to be root filesystem
[ 0.660000] mtd: partition "rootfs_data" created automatically, ofs=640000, len=1C0000
[ 0.676000] 0x000000640000-0x000000800000 : "rootfs_data"
[ 0.688000] 0x000000050000-0x000000800000 : "firmware"
[ 0.700000] 0x000000000000-0x000000800000 : "fullflash"
[ 0.712000] rdm_major = 253
[ 0.716000] SMACCR1 -- : 0x000074f8
[ 0.724000] SMACCR0 -- : 0xdb6eee11
[ 0.732000] Ralink APSoC Ethernet Driver Initilization. v3.0 256 rx/tx descriptors allocated, mtu = 1500!
[ 0.752000] NAPI enable, Tx Ring = 256, Rx Ring = 256
[ 0.760000] SMACCR1 -- : 0x000074f8
[ 0.768000] SMACCR0 -- : 0xdb6eee11
[ 0.776000] PROC INIT OK!
[ 0.788000] Ralink APSoC Hardware Watchdog Timer
[ 0.796000] TCP cubic registered
[ 0.804000] NET: Registered protocol family 17
[ 0.812000] 8021q: 802.1Q VLAN Support v1.8
[ 0.828000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 0.844000] Freeing unused kernel memory: 164k freed
[ 2.552000] Registered led device: ts7620n:sys
[ 2.552000] Registered led device: ts7620n:wifi
[ 2.556000] Registered led device: ts7620n:usb
[ 5.772000] JFFS2 notice: (431) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 27 of xref (0 dead, 8 orphan) found.
[ 6.304000] SCSI subsystem initialized
[ 6.500000] usbcore: registered new interface driver usbfs
[ 6.512000] usbcore: registered new interface driver hub
[ 6.524000] usbcore: registered new device driver usb
[ 7.012000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.044000] rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
[ 7.056000] rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1
[ 7.096000] rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000
[ 7.116000] rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00
[ 7.124000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.140000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.152000] usb usb1: Product: Ralink EHCI Host Controller
[ 7.164000] usb usb1: Manufacturer: Linux 3.3.8 ehci_hcd
[ 7.176000] usb usb1: SerialNumber: rt3xxx
[ 7.184000] hub 1-0:1.0: USB hub found
[ 7.192000] hub 1-0:1.0: 1 port detected
[ 7.300000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.332000] rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
[ 7.344000] rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2
[ 7.360000] rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000
[ 7.432000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.444000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.460000] usb usb2: Product: RT3xxx OHCI Controller
[ 7.468000] usb usb2: Manufacturer: Linux 3.3.8 ohci_hcd
[ 7.480000] usb usb2: SerialNumber: rt3xxx-ohci
[ 7.488000] hub 2-0:1.0: USB hub found
[ 7.496000] hub 2-0:1.0: 1 port detected
[ 7.560000] usb 1-1: new high-speed USB device number 2 using rt3xxx-ehci
[ 7.576000] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.600000] Initializing USB Mass Storage driver...
[ 7.608000] usbcore: registered new interface driver usb-storage
[ 7.620000] USB Mass Storage support registered.
[ 7.740000] usb 1-1: New USB device found, idVendor=148f, idProduct=3070
[ 7.752000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.768000] usb 1-1: Product: 802.11 n WLAN
[ 7.776000] usb 1-1: Manufacturer: Ralink
[ 7.784000] usb 1-1: SerialNumber: 1.0
[ 29.432000] rt2860v2_ap: version magic '3.4.107 mod_unload MIPS32_R2 32BIT ' should be '3.3.8 mod_unload MIPS32_R2 32BIT '
[ 29.632000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 29.648000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 29.796000] cfg80211: Calling CRDA to update world regulatory domain
[ 29.808000] cfg80211: World regulatory domain updated:
[ 29.816000] cfg80211: DFS Master region: unset
[ 29.824000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 29.844000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2700 mBm), (N/A)
[ 29.860000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2700 mBm), (N/A)
[ 29.876000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2700 mBm), (N/A)
[ 29.892000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2700 mBm), (N/A)
[ 29.908000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2700 mBm), (N/A)
[ 29.924000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 30.640000] usbcore: registered new interface driver rt73usb
[ 30.780000] usb 1-1: reset high-speed USB device number 2 using rt3xxx-ehci
[ 30.936000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 30.980000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 30.996000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 30.996000] Registered led device: rt2800usb-phy0::radio
[ 30.996000] Registered led device: rt2800usb-phy0::assoc
[ 30.996000] Registered led device: rt2800usb-phy0::quality
[ 30.996000] usbcore: registered new interface driver rt2800usb
[ 31.148000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 31.588000] PPP generic driver version 2.4.2
[ 31.636000] gpiodev: gpio device registered with major 254
[ 31.900000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.096000] NET: Registered protocol family 24
[ 32.196000] nf_conntrack version 0.5.0 (952 buckets, 3808 max)
[ 33.164000] xt_time: kernel timezone is -0000
[ 33.652000] rtw driver version=v3.4.2_3727.20120404
[ 33.664000] Build at: Feb 2 2015 13:05:58
[ 33.672000] usbcore: registered new interface driver rtl8192cu
[ 33.800000] usbcore: registered new interface driver ums-alauda
[ 33.828000] usbcore: registered new interface driver ums-cypress
[ 33.852000] usbcore: registered new interface driver ums-datafab
[ 33.876000] usbcore: registered new interface driver ums-freecom
[ 33.904000] usbcore: registered new interface driver ums-isd200
[ 33.928000] usbcore: registered new interface driver ums-jumpshot
[ 33.956000] usbcore: registered new interface driver ums-karma
[ 33.980000] usbcore: registered new interface driver ums-sddr09
[ 34.008000] usbcore: registered new interface driver ums-sddr55
[ 34.032000] usbcore: registered new interface driver ums-usbat
[ 34.136000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[ 34.460000] u32 classifier
[ 34.468000] Performance counters on
[ 34.476000] input device check on
[ 34.480000] Actions configured
[ 34.580000] Mirror/redirect action on
[ 34.692000] fuse init (API version 7.18)
[ 35.080000] rtusb init rt2870 --->
[ 35.088000] usbcore: registered new interface driver rt2870
[ 38.080000] Raeth v3.0 (NAPI,SkbRecycle)
[ 38.088000]
[ 38.088000] phy_tx_ring = 0x033a9000, tx_ring = 0xa33a9000
[ 38.088000]
[ 38.088000] phy_rx_ring0 = 0x02d9a000, rx_ring0 = 0xa2d9a000
[ 38.088000] SMACCR1 -- : 0x000074f8
[ 38.088000] SMACCR0 -- : 0xdb6eee11
[ 38.132000] ESW: Link Status Changed - Port3 Link UP
[ 38.140000] CDMA_CSG_CFG = 81000000
[ 38.148000] GDMA1_FWD_CFG = 20710000
[ 38.160000] device eth2.1 entered promiscuous mode
[ 38.172000] device eth2 entered promiscuous mode
[ 38.236000] br-lan: port 1(eth2.1) entered forwarding state
[ 38.248000] br-lan: port 1(eth2.1) entered forwarding state
[ 40.252000] br-lan: port 1(eth2.1) entered forwarding state
[ 44.000000] 0x1300 = 00064300
[ 45.312000] device ra0 entered promiscuous mode
[ 45.320000] br-lan: port 2(ra0) entered forwarding state
[ 45.332000] br-lan: port 2(ra0) entered forwarding state
[ 45.536000] cfg80211: Calling CRDA for country: MX
[ 45.544000] cfg80211: Regulatory domain changed to country: MX
[ 45.556000] cfg80211: DFS Master region: FCC
[ 45.564000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 45.584000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 45.600000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 45.616000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
[ 45.632000] cfg80211: (5490000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
[ 45.648000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 46.696000] Started WatchDog Timer.
[ 46.712000] Started WatchDog Timer.
[ 46.780000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 46.816000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 47.336000] br-lan: port 2(ra0) entered forwarding state
[ 49.360000] wlan0: authenticate with 0c:96:e6:ef:2b:33
[ 49.456000] wlan0: send auth to 0c:96:e6:ef:2b:33 (try 1/3)
[ 49.648000] wlan0: send auth to 0c:96:e6:ef:2b:33 (try 2/3)
[ 49.728000] wlan0: authenticated
[ 49.808000] wlan0: associate with 0c:96:e6:ef:2b:33 (try 1/3)
[ 49.828000] wlan0: RX AssocResp from 0c:96:e6:ef:2b:33 (capab=0x1411 status=0 aid=1)
[ 49.880000] wlan0: associated
root@Router:~# uname -a
Linux Router 3.3.8 #9 Wed May 18 14:19:47 CST 2016 mips GNU/Linux
root@Router:~# lspci
-ash: lspci: not found
root@Router:~#