Autor Tema: Ayuda!!! Huawei HG553 brickeado :(  (Leído 3693 veces)

0 Usuarios y 1 Visitante están viendo este tema.

zsalo1980

  • Visitante
Ayuda!!! Huawei HG553 brickeado :(
« en: 28-01-2013, 22:12 (Lunes) »
Hola a todos,

Primero daros las gracias por el gran trabajo realizado dando soporte al router HG556 (ya soportado oficialmente gracias a vosotros) y el cual estoy disfrutando  ;D.

Ahora al lio, trasteando con un HG553 le instalé la versión trunk r35047 con tan mala suerte que el kernel se queda colgado en el arranque, os dejo un log de arranque, el error está abajo de todo:

Código: [Seleccionar]
[    0.000000] Linux version 3.6.11 (fnord@tschunk) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Tue Jan 8 02:28:17 UTC 2013
[    0.000000] Detected Broadcom 0x6358 CPU revision a1                                   
[    0.000000] CPU frequency is 300 MHz                                                   
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-48.46
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW553
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 61316k/65536k available (2388k kernel code, 4220k reserved, 659k data, 212k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 297.98 BogoMIPS (lpj=595968)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.048000] NET: Registered protocol family 16
[    0.064000] registering PCI controller with io_map_base unset
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x8007fff]
[    0.108000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.124000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
[    0.128000] PCI host bridge to bus 0000:01
[    0.132000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
[    0.136000] pci_bus 0000:01: root bus resource [io  0x8008000-0x800ffff]
[    0.140000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.144000] pci 0000:01:1e.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.148000] pci 0000:01:1e.0: BAR 10: assigned [mem 0x38000000-0x3fffffff]
[    0.152000] pci 0000:01:1e.0: BAR 7: assigned [io  0x8008000-0x80080ff]
[    0.156000] pci 0000:01:1e.0: BAR 8: assigned [io  0x8008400-0x80084ff]
[    0.160000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
[    0.164000] pci 0000:01:1e.0:   bridge window [io  0x8008000-0x80080ff]
[    0.168000] pci 0000:01:1e.0:   bridge window [io  0x8008400-0x80084ff]
[    0.172000] pci 0000:01:1e.0:   bridge window [mem 0x38000000-0x3fffffff]
[    0.176000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)
[    0.180000] Switching to clocksource MIPS
[    0.192000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.220000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[    0.268000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.276000] NET: Registered protocol family 2
[    0.284000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.292000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.296000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.304000] TCP: reno registered
[    0.308000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.316000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.320000] NET: Registered protocol family 1
[    0.332000] audit: initializing netlink socket (disabled)
[    0.336000] type=2000 audit(0.336:1): initialized
[    0.344000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.348000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.360000] msgmni has been set to 119
[    0.364000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.372000] io scheduler noop registered
[    0.376000] io scheduler deadline registered (default)
[    0.384000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.392000] console [ttyS0] enabled, bootconsole disabled
[    0.392000] console [ttyS0] enabled, bootconsole disabled
[    0.408000] physmap platform flash device: 02000000 at 1e000000
[    0.416000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
[    0.424000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.432000]   Amd/Fujitsu Extended Query version 1.3.
[    0.436000] number of CFI chips: 1
[    0.440000] bcm63xxpart: CFE boot tag found with version 7 and board type HW553
[    0.448000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.456000] bcm63xxpart: Partition 1 is rootfs offset 20100 and length 672000
[    0.460000] bcm63xxpart: Partition 2 is kernel offset 692100 and length a2c59
[    0.468000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
[    0.476000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
[    0.484000] bcm63xxpart: Spare partition is offset 740000 and length 8a0000
[    0.492000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.496000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.504000] 0x000000000000-0x000000020000 : "CFE"
[    0.512000] 0x000000020100-0x000000692100 : "rootfs"
[    0.516000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.536000] mtd: partition "rootfs" set to be root filesystem
[    0.540000] split_squashfs: no squashfs found in "physmap-flash.0"
[    0.548000] 0x000000692100-0x000000734d59 : "kernel"
[    0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.568000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.580000] 0x000000020000-0x000000fe0000 : "linux"
[    0.596000] libphy: bcm63xx_enet MII bus: probed
[    0.600000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Generic PHY]
[    0.616000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.632000] TCP: cubic registered
[    0.636000] NET: Registered protocol family 17
[    0.640000] Bridge firewalling registered
[    0.648000] 8021q: 802.1Q VLAN Support v1.8
[    0.656000] jffs2: Flash size not aligned to erasesize, reducing to 640KiB
[    0.664000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x8001 instead
[    0.672000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x8020 instead
[    0.684000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0x000a instead
[    0.692000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x5d00 instead
[    0.704000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0xfdff instead
[    0.712000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0xb77f instead
[    0.720000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x5581 instead
[    0.732000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x8bfd instead
[    0.740000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0xbd5c instead
[    0.752000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000028: 0x7726 instead
[    0.760000] jffs2: Further such events for this erase block will not be printed
[    0.824000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x0433 instead
[    0.832000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x4dc5 instead
[    0.840000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0x4ee5 instead
[    0.852000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x4332 instead
[    0.860000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0x59f2 instead
[    0.872000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0xad56 instead
[    0.880000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0x38b2 instead
[    0.892000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0xcd18 instead
[    0.900000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0xfdeb instead
[    0.912000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xb17f instead
[    0.920000] jffs2: Further such events for this erase block will not be printed
[    0.940000] jffs2: Old JFFS2 bitmask found at 0x000273a4
[    0.948000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[    0.956000] jffs2: Old JFFS2 bitmask found at 0x00029408
[    0.964000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[    1.008000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x612e instead
[    1.016000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0xf8f8 instead
[    1.028000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0xd0d8 instead
[    1.036000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x9e39 instead
[    1.048000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0xc7e8 instead
[    1.056000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x1e1e instead
[    1.064000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x251c instead
[    1.076000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0x9868 instead
[    1.084000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0xb6a1 instead
[    1.096000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0x66b2 instead
[    1.104000] jffs2: Further such events for this erase block will not be printed
[    1.144000] jffs2: Old JFFS2 bitmask found at 0x00053ed0
[    1.152000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[    1.180000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0x26a8 instead
[    1.188000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0xcc72 instead
[    1.200000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0xc1e1 instead
[    1.208000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x0625 instead
[    1.216000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0xe170 instead
[    1.228000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0x235e instead
[    1.236000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x9d32 instead
[    1.248000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0xd1b0 instead
[    1.256000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0xdae8 instead
[    1.268000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0x0474 instead
[    1.276000] jffs2: Further such events for this erase block will not be printed
[    1.336000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0x6206 instead
[    1.348000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x426c instead
[    1.356000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0xfd04 instead
[    1.368000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0xec38 instead
[    1.376000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0xd581 instead
[    1.388000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0x1ba7 instead
[    1.396000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0x8bbd instead
[    1.408000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0x3dc7 instead
[    1.416000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0xbd0e instead
[    1.424000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xf704 instead
[    1.436000] jffs2: Further such events for this erase block will not be printed
[    1.496000] jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
[    1.504000] jffs2: empty_blocks 0, bad_blocks 0, c->nr_blocks 5
[    1.512000] VFS: Cannot open root device "mtdblock2" or unknown-block(31,2): error -5
[    1.520000] Please append a correct "root=" boot option; here are the available partitions:
[    1.528000] 1f00             128 mtdblock0  (driver?)
[    1.532000] 1f01            6600 mtdblock1  (driver?)
[    1.540000] 1f02             651 mtdblock2  (driver?)
[    1.544000] 1f03             128 mtdblock3  (driver?)
[    1.548000] 1f04           16128 mtdblock4  (driver?)
[    1.556000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)

Tengo el router conectado a la consola serie, pero el gran problema que tengo es que no puedo conectarme al bootloader, no es como la consola del HG556a que pulsas cualquier tecla al inicio y entras en el CLI del bootloader, este tarda unos 8 segundos sin hacer nada (problé en ese tiempo a pulsar teclas y no hace nada) y luego empieza el arranque.

Estuve leyendo por ahí algo del JTAG pero no me quedó nada claro ni como hacerme el cable ni como cargarle a este router un nuevo bootloader o una nueva imagen.

¿Alguna sugerencia o ayuda? No tengo problema en soldarle cables,  al HG556a le soldé un pinheader macho para conectarme por puerto serie  :D

Saludos y gracias



Noltari

  • Visitante
Re: Ayuda!!! Huawei HG553 brickeado :(
« Respuesta #1 en: 28-01-2013, 22:38 (Lunes) »
Hola a todos,

Primero daros las gracias por el gran trabajo realizado dando soporte al router HG556 (ya soportado oficialmente gracias a vosotros) y el cual estoy disfrutando  ;D.

Ahora al lio, trasteando con un HG553 le instalé la versión trunk r35047 con tan mala suerte que el kernel se queda colgado en el arranque, os dejo un log de arranque, el error está abajo de todo:

Código: [Seleccionar]
[    0.000000] Linux version 3.6.11 (fnord@tschunk) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Tue Jan 8 02:28:17 UTC 2013
[    0.000000] Detected Broadcom 0x6358 CPU revision a1                                   
[    0.000000] CPU frequency is 300 MHz                                                   
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-48.46
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW553
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 61316k/65536k available (2388k kernel code, 4220k reserved, 659k data, 212k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 297.98 BogoMIPS (lpj=595968)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.048000] NET: Registered protocol family 16
[    0.064000] registering PCI controller with io_map_base unset
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x8007fff]
[    0.108000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.124000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
[    0.128000] PCI host bridge to bus 0000:01
[    0.132000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
[    0.136000] pci_bus 0000:01: root bus resource [io  0x8008000-0x800ffff]
[    0.140000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.144000] pci 0000:01:1e.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.148000] pci 0000:01:1e.0: BAR 10: assigned [mem 0x38000000-0x3fffffff]
[    0.152000] pci 0000:01:1e.0: BAR 7: assigned [io  0x8008000-0x80080ff]
[    0.156000] pci 0000:01:1e.0: BAR 8: assigned [io  0x8008400-0x80084ff]
[    0.160000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
[    0.164000] pci 0000:01:1e.0:   bridge window [io  0x8008000-0x80080ff]
[    0.168000] pci 0000:01:1e.0:   bridge window [io  0x8008400-0x80084ff]
[    0.172000] pci 0000:01:1e.0:   bridge window [mem 0x38000000-0x3fffffff]
[    0.176000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)
[    0.180000] Switching to clocksource MIPS
[    0.192000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.220000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[    0.268000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.276000] NET: Registered protocol family 2
[    0.284000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.292000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.296000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.304000] TCP: reno registered
[    0.308000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.316000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.320000] NET: Registered protocol family 1
[    0.332000] audit: initializing netlink socket (disabled)
[    0.336000] type=2000 audit(0.336:1): initialized
[    0.344000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.348000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.360000] msgmni has been set to 119
[    0.364000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.372000] io scheduler noop registered
[    0.376000] io scheduler deadline registered (default)
[    0.384000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.392000] console [ttyS0] enabled, bootconsole disabled
[    0.392000] console [ttyS0] enabled, bootconsole disabled
[    0.408000] physmap platform flash device: 02000000 at 1e000000
[    0.416000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
[    0.424000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.432000]   Amd/Fujitsu Extended Query version 1.3.
[    0.436000] number of CFI chips: 1
[    0.440000] bcm63xxpart: CFE boot tag found with version 7 and board type HW553
[    0.448000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.456000] bcm63xxpart: Partition 1 is rootfs offset 20100 and length 672000
[    0.460000] bcm63xxpart: Partition 2 is kernel offset 692100 and length a2c59
[    0.468000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
[    0.476000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
[    0.484000] bcm63xxpart: Spare partition is offset 740000 and length 8a0000
[    0.492000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.496000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.504000] 0x000000000000-0x000000020000 : "CFE"
[    0.512000] 0x000000020100-0x000000692100 : "rootfs"
[    0.516000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.536000] mtd: partition "rootfs" set to be root filesystem
[    0.540000] split_squashfs: no squashfs found in "physmap-flash.0"
[    0.548000] 0x000000692100-0x000000734d59 : "kernel"
[    0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.568000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.580000] 0x000000020000-0x000000fe0000 : "linux"
[    0.596000] libphy: bcm63xx_enet MII bus: probed
[    0.600000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Generic PHY]
[    0.616000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.632000] TCP: cubic registered
[    0.636000] NET: Registered protocol family 17
[    0.640000] Bridge firewalling registered
[    0.648000] 8021q: 802.1Q VLAN Support v1.8
[    0.656000] jffs2: Flash size not aligned to erasesize, reducing to 640KiB
[    0.664000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x8001 instead
[    0.672000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x8020 instead
[    0.684000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0x000a instead
[    0.692000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x5d00 instead
[    0.704000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0xfdff instead
[    0.712000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0xb77f instead
[    0.720000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x5581 instead
[    0.732000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x8bfd instead
[    0.740000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0xbd5c instead
[    0.752000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000028: 0x7726 instead
[    0.760000] jffs2: Further such events for this erase block will not be printed
[    0.824000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x0433 instead
[    0.832000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x4dc5 instead
[    0.840000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0x4ee5 instead
[    0.852000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x4332 instead
[    0.860000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0x59f2 instead
[    0.872000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0xad56 instead
[    0.880000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0x38b2 instead
[    0.892000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0xcd18 instead
[    0.900000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0xfdeb instead
[    0.912000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xb17f instead
[    0.920000] jffs2: Further such events for this erase block will not be printed
[    0.940000] jffs2: Old JFFS2 bitmask found at 0x000273a4
[    0.948000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[    0.956000] jffs2: Old JFFS2 bitmask found at 0x00029408
[    0.964000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[    1.008000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x612e instead
[    1.016000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0xf8f8 instead
[    1.028000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0xd0d8 instead
[    1.036000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x9e39 instead
[    1.048000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0xc7e8 instead
[    1.056000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x1e1e instead
[    1.064000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x251c instead
[    1.076000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0x9868 instead
[    1.084000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0xb6a1 instead
[    1.096000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0x66b2 instead
[    1.104000] jffs2: Further such events for this erase block will not be printed
[    1.144000] jffs2: Old JFFS2 bitmask found at 0x00053ed0
[    1.152000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[    1.180000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0x26a8 instead
[    1.188000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0xcc72 instead
[    1.200000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0xc1e1 instead
[    1.208000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x0625 instead
[    1.216000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0xe170 instead
[    1.228000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0x235e instead
[    1.236000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x9d32 instead
[    1.248000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0xd1b0 instead
[    1.256000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0xdae8 instead
[    1.268000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0x0474 instead
[    1.276000] jffs2: Further such events for this erase block will not be printed
[    1.336000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0x6206 instead
[    1.348000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x426c instead
[    1.356000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0xfd04 instead
[    1.368000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0xec38 instead
[    1.376000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0xd581 instead
[    1.388000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0x1ba7 instead
[    1.396000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0x8bbd instead
[    1.408000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0x3dc7 instead
[    1.416000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0xbd0e instead
[    1.424000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xf704 instead
[    1.436000] jffs2: Further such events for this erase block will not be printed
[    1.496000] jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
[    1.504000] jffs2: empty_blocks 0, bad_blocks 0, c->nr_blocks 5
[    1.512000] VFS: Cannot open root device "mtdblock2" or unknown-block(31,2): error -5
[    1.520000] Please append a correct "root=" boot option; here are the available partitions:
[    1.528000] 1f00             128 mtdblock0  (driver?)
[    1.532000] 1f01            6600 mtdblock1  (driver?)
[    1.540000] 1f02             651 mtdblock2  (driver?)
[    1.544000] 1f03             128 mtdblock3  (driver?)
[    1.548000] 1f04           16128 mtdblock4  (driver?)
[    1.556000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)

Tengo el router conectado a la consola serie, pero el gran problema que tengo es que no puedo conectarme al bootloader, no es como la consola del HG556a que pulsas cualquier tecla al inicio y entras en el CLI del bootloader, este tarda unos 8 segundos sin hacer nada (problé en ese tiempo a pulsar teclas y no hace nada) y luego empieza el arranque.

Estuve leyendo por ahí algo del JTAG pero no me quedó nada claro ni como hacerme el cable ni como cargarle a este router un nuevo bootloader o una nueva imagen.

¿Alguna sugerencia o ayuda? No tengo problema en soldarle cables,  al HG556a le soldé un pinheader macho para conectarme por puerto serie  :D

Saludos y gracias
¿Estás seguro de que TX/RX están bien conectados? Es muy raro que sólo puedas leer y no escribir, más aún cuando en el HG556a te funciona.

Si la imagen que has flasheado es squashfs puedes recuperarla con el modo failsafe (estoy un poco harto de repetir esto ya...).
Para entrar en failsafe enciende el router y presiona y suelta repetidas veces el botón de reset, hasta que el LED de Power parpadee rápidamente.
Una vez el LED parpadee puedes conectarte por telenet a 192.168.1.1.

Para borrar los datos de la partición de datos:
Código: [Seleccionar]
mtd erase -r rootfs_data
En este caso no quieres borrar ningún dato, quieres que mtd deje de quejarse forzando el borrado de la partición rootfs entera.

Saludos.

zsalo1980

  • Visitante
Re: Ayuda!!! Huawei HG553 brickeado :(
« Respuesta #2 en: 29-01-2013, 09:44 (Martes) »
Gracias por tu rápida respuesta, probé lo que me dices y no hace nada, arranco el router y pulso repetidamente el botón de reset pero el led de power no llega a parpadear, se queda fijo como siempre. Se que la imagen era squashfs pero no entra en modo failsafe.

En el HG556a cuando lo conectas por consola serie si que da la opción de conectarte en modo failsafe, pero es en un momento del arranque más tardío que el kernel panic que me da el HG553, es justo después de montar el root fs.
En cuanto al cable serie se que funciona y está bien conectado porque con el firmware original entraba a la consola de administración por el puerto serie.

El problema es que con este router en concreto,no se si con todos los HG553, no da opción a entrar en el bootloader y no muestra ninguna información del bootloader al arrancar como en el HG556 que te muestra la version, el tipo de bootloader dirección ip y mac....etc, por eso creo que la única opción es intentarlo con el cable JTAG, pero no tengo ni idea de como hacerlo ni de que archivos tendría que flashear.

Gracias.

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4597
Re: Ayuda!!! Huawei HG553 brickeado :(
« Respuesta #3 en: 29-01-2013, 10:15 (Martes) »
Y porqué no flasheas un nuevo firm ?

Citar
Ahora para poder actulizar con el nuevo firmware, deberemos entrar en el modo 'rescate' del router: lo apagamos, pinchamos el botón de reset y
encendemos el router manteniendo pulsado el botón durante 30 segundos.

Configuramos la ip de nuestra tarjeta de red dentro del rango 192.168.1.x (podemos usar la 192.168.1.2 en adelante) con máscara de red
255.255.0.0 (no es necesario configurar puerta de enlace ni nada más).
Abrimos nuestro navegador y tecleamos la ip 192.168.1.1
Valoraciones positivas en compra/venta:
158 en Htcmania
211 en Har2mano
23 en elchapuzasinformatico
12 en gsmspain
 ....
 
Mis equipos en venta: https://drive.google.com/open?id=1Zi_bqLSfg_qCT8sx6JhPaWVvSeZXpcka

zsalo1980

  • Visitante
Re: Ayuda!!! Huawei HG553 brickeado :(
« Respuesta #4 en: 29-01-2013, 10:33 (Martes) »
Menuda cara de gilixxxxas se me acaba de quedar. Había visto antes en alguno de tus foros esto que me indicas pero siempre había creido que era parte del firmware original, de la interface de configuración, creía que al flashear con una nueva rom esto desaparecía......ahora que me fijo pone Huawei Home Gateway CFE en el título...

Gracias Jar229  >:( y Noltari por vuestras rápidas respuestas y por atender temas ya tratados :-[

//FINAL Y MÁS DOS RESPUESTAS