?>/script>'; } ?> Astoria networks ARV7519 Widgets Magazine

Autor Tema: Astoria networks ARV7519  (Leído 109804 veces)

0 Usuarios y 2 Visitantes están viendo este tema.

on-off

  • Visitante
Astoria networks ARV7519
« en: 25-10-2012, 11:10 (Jueves) »
Hola amigos, es la primera vez que escribo en este foro, aunque os he leído mucho.

He estado muy atento al tema OpenWRT para routers Astoria de ya.com, pero creo que este modelo no está contemplado en este tema, por eso me animo a publicar un tema nuevo.

He soldado los mines a la placa para sacar el log de arranque y aquí os lo pongo, también saque una copia de seguridad de la configuración, fichero .bin, por si se puede sacar algo.

Mi pregunta es la siguiente, necesito saber si se puede ver la configuración de las opciones de VOIP, esta línea la tengo puesta con un asterisk y me complica mucho el tema del registro SIP, vamos que ahora no funciona y no puedo recibir llamadas.

Saludos y gracias a todos por vuestra ayuda.

[spoiler=< ver log>]
Código: [Seleccionar]

ROM VER: 1.
ROM VER: 1.0.5
CFG 01
Tuning DDR begin
DDR Access auto data-eye tuning Rev 0.3a
DDR size from 0xa0000000 - 0xa7ffffff
DDR check ok... start booting...




=======================================================================
Wireless ADSL IAD VR9 Loader v0.70.01 build Mar 26 2012 13:36:53
                    Arcadyan Technology Corporation
=======================================================================
A1x VR9
0xbe22ff1c : 70240000
0xBf203014 : 70240000
MXIC MX29GL256EL top boot 16-bit mode found

Copying boot params.....DONE

Enter command mode ...
Get Primary to 0.....
Image Check from FLASH_AREA_IMAGE_0 : Passed.

Unzipping firmware at 0x80002000 ... with AREA[1][ZIP 3] [ZIP 1]  done
Ready to run firmware

In c_entry() function ...
install_exception
Co config = 80048483
sys_irq_init ...
IrqConnect : IRQ = 53, Handler = 0x80016364
VR9 is not A21 chip !!!!, ifx_bsp_basic_mps_decrypt bfc01ea4
0xbf106a0b : 78
0xbf106a0b : 78
0xbf106a0c : 80
0xbf106a0c : 80
##### _ftext      = 0x80002000
##### _fdata      = 0x807F8A60
##### __bss_start = 0x809478F4
##### end         = 0x8684C538
allocate_memory_after_end> len 1371796, ptr 0x86854540
##### Backup Data from 0x807F8A60 to 0x86854538~0x869A33CC len 1371796
##### Backup Data completed
##### Backup Data verified
[GPIO FLOW] SetGpio() Begin ..
ifx_gpio_init() !!!
ifx_gpio_pre_init() !!!
[KERN_INFO]IFX GPIO driver, version 1.2.10, (c)2009 Infineon Technologies AG
Register LED MODULE OK!!
Register BUTTON MODULE OK!!
[GPIO FLOW] SetGpio() End.
[INIT] System Log Pool startup ...
[INIT] MTinitialize ..
CPU Clock 500000000 Hz
mips_counter_frequency:250000000
r4k_offset: 0x0003d090(250000)
init_US_counter : time1 = 53 , time2 = 200080, diff 200027
US_counter = 125
set to constant US_counter = 112
 cnt1 2040019 cnt2 2042856, diff 2837
 cnt1 2886386 cnt2 2888186, diff 1800
Runtime code version: 00.95.005
System startup...
[INIT] Memory COLOR 0, 10827424 bytes ..
[INIT] Memory COLOR 1, 2097152 bytes ..
[INIT] Memory COLOR 2, 13809456 bytes ..
MXIC MX29GL128EL bottom boot 16-bit mode found
console_enable=0
Set flash memory layout to Boot Parameters found !!!
Bootcode version: v0.70.01
Serial number: J217211009
Hardware version: 01
09.03.2012-18:10:13
[BUILD-WPA]: Key:F5E161E66806
[BUILD:PIN] PIN:J217211009, MAC:1CC63C67A37E
[BUILD-PIN]: PIN:82852863, len=8
[CONFIG] : default SSID = Orange-A37E
[CONFIG] : default WPA/WPA2 PSK = 9E23A553
[BUILD:PIN] PIN:J217211009, MAC:1CC63C67A37E
[BUILD-PIN]: PIN:82852863, len=8
[BUILD-PIN]: PIN:82852863, len=8
!![E-CFG-READ] Special Configuration data reading error!!
!![E-CFG-READ] Reset to factory defaults 1!!
MXIC MX29GL128EL bottom boot 16-bit mode found


nLen:98, Magic:0x33343536

my CFGVersionMagic = 33343536, old CFGVersionMagic on flash = 33343536
my CFGsize = 370144, my CFGDescSize = 40454
my Version = 00.95.005, Version on flash= 00.95.005
[CONFIG] old cfg version:[00.95.005], [0.0.95.0.5.100]
source CFGsize = 370144, CFGDescSize = 40454
MXIC MX29GL128EL bottom boot 16-bit mode found
OldCfgHexSize:13069
Unzipping from 81E1A588 to 81E10770 ... [ZIP 2] allocate_memory_after_end> len 81516,
ptr 0x869a33f0
done
Uncompressed size = 40452
Tail1 : END_III_Config_t

Size of Old CFG_DESC is :40452!!!
useCfgDesc:1
MyCfgHexSize:13069
Unzipping from 81E0D448 to 81E03630 ... [ZIP 2] done
Uncompressed size = 40452
My CFGDescSize:40454
useCfgDesc:1
Tail : END_III_Config_t

useCfgDesc:3

Restore Config file from ver:00.95.005!!!

[CONFIG] DS_Tail:[t_ARV7519RW22]
[CONFIG] load_config ret=1
[updateConfig] flash version:[00.95.005], [0.0.95.0.5.100]
[updateConfig]  code version:[00.95.005], [0.0.95.0.5.100]
[CONFIG] : smtp_email_from = Orange-A37E@orange.es
!!! Invalid wireless channel range 0 ~ 0
!!! Use default value 1 ~ 13
default route: 0.0.0.0
[CheckUSBBackConf]Erase the garbage config in usbBackConf_s
BufferInit:
BUF_HDR_SZ=224 BUF_ALIGN_SZ=16 BUFFER_OFFSET=480
BUF_BUFSZ0=576 BUF_BUFSZ1=4384
NUM_OF_B0=0 NUM_OF_B1=6178
BUF_POOL0_SZ=0 BUF_POOL1_SZ=28468224
sizeof(BUFFER0)=800,sizeof(BUFFER1)=4608
*BUF0=0x84779168 *BUF1=0x82c52d48
Altgn *BUF0=0x84779180 *BUF1=0x82c52d60
End at BUF0:0x84779180, BUF1:0x84779160

BUF0[0]=0x84779180 BUF1[0]=0x82c52d60

buffer0 pointer init OK!
buffer1 pointer init OK!
[qm_lnk_init] CLOCKHZ=1000 ...
[qm_lnk_init] add if 3 into QM link 0
[qm_lnk_init] add if 4 into QM link 0
[qm_cbq_enable] no QM attached
[qm_cbq_detach] no QM is attached at link 0
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=10000000/100000, ns_per_byte=80000/1000
ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
New cls: id=0, bw=80 ns/byte, maxd=0 ms,
         maxb=32, minb=2, avgpktsz=250, maxpktsz=1600,
         offtime=0, parent=0, borrow=0
         pri=0, maxidle=31, minidle=-256,
         maxq=96, clsfg=17
pkt_avgsz=1600, pkt_maxsz=1600, mtu=1600
f=100000/100000, ns_per_byte=8000000/1000
ptime=18446744073709551615/1000, cptime=0/1000, offtime=0/1000
New cls: id=1, bw=8000 ns/byte, maxd=0 ms,
         maxb=16, minb=1, avgpktsz=1600, maxpktsz=1600,
         offtime=0, parent=8684812c, borrow=8684812c
         pri=5, maxidle=200, minidle=-25600,
         maxq=48, clsfg=21
qm_cbq_attach(): cbqp->cbq_res=109
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=9900000/100000, ns_per_byte=80808/1000
ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
New cls: id=2, bw=80 ns/byte, maxd=0 ms,
         maxb=32, minb=4, avgpktsz=250, maxpktsz=1600,
         offtime=0, parent=8684812c, borrow=8684812c
         pri=5, maxidle=31, minidle=-258,
         maxq=48, clsfg=21
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=1/100000, ns_per_byte=4294967295/1000
[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow
ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000
New cls: id=3, bw=1342177 ns/byte, maxd=0 ms,
         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
         offtime=1366279, parent=86846b2c, borrow=86846b2c
         pri=6, maxidle=0, minidle=-4294966,
         maxq=48, clsfg=20
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=1/100000, ns_per_byte=4294967295/1000
[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow
ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000
New cls: id=4, bw=1342177 ns/byte, maxd=0 ms,
         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
         offtime=1366279, parent=86846b2c, borrow=86846b2c
         pri=0, maxidle=0, minidle=-4294966,
         maxq=96, clsfg=21
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=1/100000, ns_per_byte=4294967295/1000
[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow
ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000
New cls: id=5, bw=1342177 ns/byte, maxd=0 ms,
         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
         offtime=1366279, parent=86846b2c, borrow=86846b2c
         pri=1, maxidle=0, minidle=-4294966,
         maxq=48, clsfg=23
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=1/100000, ns_per_byte=4294967295/1000
[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow
ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000
New cls: id=6, bw=1342177 ns/byte, maxd=0 ms,
         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
         offtime=1366279, parent=86846b2c, borrow=86846b2c
         pri=2, maxidle=0, minidle=-4294966,
         maxq=48, clsfg=23
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=1/100000, ns_per_byte=4294967295/1000
[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow
ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000
New cls: id=7, bw=1342177 ns/byte, maxd=0 ms,
         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
         offtime=1366279, parent=86846b2c, borrow=86846b2c
         pri=3, maxidle=0, minidle=-4294966,
         maxq=48, clsfg=23
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=1/100000, ns_per_byte=4294967295/1000
[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow
ptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000
New cls: id=8, bw=1342177 ns/byte, maxd=0 ms,
         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
         offtime=1366279, parent=86846b2c, borrow=86846b2c
         pri=4, maxidle=0, minidle=-4294966,
         maxq=48, clsfg=23
pkt_avgsz=250, pkt_maxsz=1600, mtu=1600
f=9900000/100000, ns_per_byte=80808/1000
ptime=2000000000/1000, cptime=0/1000, offtime=0/1000
New cls: id=9, bw=80 ns/byte, maxd=0 ms,
         maxb=16, minb=4, avgpktsz=250, maxpktsz=1600,
         offtime=0, parent=86846b2c, borrow=86846b2c
         pri=6, maxidle=31, minidle=-258,
         maxq=48, clsfg=20
[qm_cbq_reset_dstcp_ctrl] dstcp_ctrl_fg=0x1, dstcp_pkt_delay=13 ms, dstcp_max_burst=6056 bytes
CLOCKHZ=1000
gConfig.Interface[0].IP_Addr = 127.0.0.1
gConfig.Interface[0].Subnet_Mask = 255.255.255.255
gConfig.Interface[0].Description = LOCAL_LOOPBACK
gConfig.Interface[0].Framing =
***** [iput_IpLinkUp] ifno=0, link_type:12
Interface 0 ip = 127.0.0.1

gConfig.Interface[1].IP_Addr = 192.168.1.1
gConfig.Interface[1].Subnet_Mask = 255.255.255.0
gConfig.Interface[1].Description = LAN1
gConfig.Interface[1].Framing =
gConfig.Interface[1].VLAN_Idx = 0
ifp->ipaddr = C0A80101
ifp->netmask = FFFFFF00
gConfig.Vlan_Ports[gConfig.Interface[1].VLAN_Idx].VNet = 1
gConfig.Vlan_Ports[gConfig.Interface[1].VLAN_Idx].IGMP_Querier_Enable = 0
[IfInit] ifno=1, gConfig.Interface[1].vlan_tagged=0, line 693
br_register_static_mcast_mac: Add static entry 01:00:5E:00:00:01 to VLAN 0 (port 1)
br_register_static_mcast_mac: Add static entry 01:00:5E:00:00:01 to VLAN 0 (port 2)
br_register_static_mcast_mac: Add static entry 01:00:5E:00:00:02 to VLAN 0 (port 1)
br_register_static_mcast_mac: Add static entry 01:00:5E:00:00:02 to VLAN 0 (port 2)
br_register_static_mcast_mac: Add static entry 01:00:5E:00:00:16 to VLAN 0 (port 1)
br_register_static_mcast_mac: Add static entry 01:00:5E:00:00:16 to VLAN 0 (port 2)
br_register_static_mcast_mac: Add static entry 01:00:5E:7F:FF:FA to VLAN 0 (port 1)
br_register_static_mcast_mac: Add static entry 01:00:5E:7F:FF:FA to VLAN 0 (port 2)
[mac_0_init] ifno=1, vlan=0, vid=1, port_mask=0x1d, mac_0_initialized=0
[KERN_INFO]IFX PMU driver, version 1.0.5, (c)2009 Infineon Technologies AG
ifx_dma_init_module :
ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 5 regid 0 regbit 5
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module DMA has been activated 1 times before
[map_dma_chan 1618]: dma_chan[0] request_irq 64
IrqConnect : IRQ = 64, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[1] request_irq 65
IrqConnect : IRQ = 65, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[2] request_irq 66
IrqConnect : IRQ = 66, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[3] request_irq 67
IrqConnect : IRQ = 67, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[4] request_irq 68
IrqConnect : IRQ = 68, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[5] request_irq 69
IrqConnect : IRQ = 69, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[6] request_irq 70
IrqConnect : IRQ = 70, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[7] request_irq 71
IrqConnect : IRQ = 71, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[8] request_irq 72
IrqConnect : IRQ = 72, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[9] request_irq 73
IrqConnect : IRQ = 73, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[10] request_irq 74
IrqConnect : IRQ = 74, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[11] request_irq 75
IrqConnect : IRQ = 75, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[12] request_irq 89
IrqConnect : IRQ = 89, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[13] request_irq 90
IrqConnect : IRQ = 90, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[14] request_irq 91
IrqConnect : IRQ = 91, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[15] request_irq 92
IrqConnect : IRQ = 92, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[16] request_irq 93
IrqConnect : IRQ = 93, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[17] request_irq 62
IrqConnect : IRQ = 62, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[18] request_irq 80
IrqConnect : IRQ = 80, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[19] request_irq 85
IrqConnect : IRQ = 85, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[20] request_irq 128
IrqConnect : IRQ = 128, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[21] request_irq 129
IrqConnect : IRQ = 129, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[22] request_irq 130
IrqConnect : IRQ = 130, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[23] request_irq 131
IrqConnect : IRQ = 131, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[24] request_irq 132
IrqConnect : IRQ = 132, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[25] request_irq 133
IrqConnect : IRQ = 133, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[26] request_irq 134
IrqConnect : IRQ = 134, Handler = 0x80355340
[map_dma_chan 1618]: dma_chan[27] request_irq 135
IrqConnect : IRQ = 135, Handler = 0x80355340
ifx_dma_init_module : g_desc_list 81105dc0
[KERN_INFO]IFX DMA driver, version ifxmips_dma_core.c:v1.0.4
,(c)2009 Infineon Technologies AG
[KERN_INFO]Infineon Technologies RCU driver version 1.1.2
vr9_config_mdio_gpio !!!
[vr9_config_mdio_gpio] *IFX_GPIO_P2_ALTSEL0=0xc00, IFX_GPIO_P2_ALTSEL1=0x0,
*IFX_GPIO_P2_DIR=0x8c01, *IFX_GPIO_P2_OD=0x8c01
IFX SWITCH API, Version 1.1.6.7
IFX_ETHSW_Open() !!!
[KERN_INFO]SWAPI: Registered character device [switch_api] with major no [81]
ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 29 regid 0 regbit 29
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PPE-TOP has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 23 regid 0 regbit 23
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PPE-DPLUSM has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 24 regid 0 regbit 24
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PPE-DPLUSS has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 28 regid 0 regbit 28
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module SWITCH has been activated 1 times before
Switch API: PCE MicroCode loaded !!
IFX_ETHSW_IOCTL_WrapperInit() !!!
chip_id 101c0083 chip_id 1c0
Switch Auto Polling value = 0
[KERN_ERR ] GPHY FW load for A1x !!
vr9_gphy_gpio_init : Config GPIO3 clock !!!
IF_CLK = 10e00008
BSP_GPIO_P0_ALTSEL0 00002000 BSP_GPIO_P0_ALTSEL1 00000080 0000e404 0000e404
BSP_GPIO_P1_ALTSEL0 00008580 BSP_GPIO_P1_ALTSEL1 00000000 0000b1b8 0000b1b8
BSP_GPIO_P2_ALTSEL0 00000c00 BSP_GPIO_P2_ALTSEL1 00000000 00008c01 00008c01
BSP_GPHY0_Cfg 1fe70000 BSP_GPHY1_Cfg 1fe70000
ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 28 regid 0 regbit 28
ifx_pmu_set: Module SWITCH has been activated 2 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615929f module 30 regid 0 regbit 30
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module GPHY has been activated 1 times before
Switch Auto Polling value = 0
vr9_gphy_reset() !!!
GPHY FIRMWARE LOAD SUCCESSFULLY AT ADDR : 750000, gphy_fw_dma=0x8074d688
[set_external_gphy_mdio_auto_polling] External GPHY Port 0, firmware version: 8200
[gphy_patch] External External Port 0, GPHY firmware version: 8200
[gphy_patch] External Chip v1.3
[KERN_INFO] IFX GPHY driver FE Mode, version ifxmips_vr9_gphy: V0.9 - Firmware: 109
[amazon_s_eth_init] Loading A5 (MII0/1 + ATM) driver ......
[amazon_s_eth_init] gPPE_Start_Module=0x1, gPPE_HAL_Start_Module=0x0
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 9 regid 0 regbit 9
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module DSL-DFE has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 13 regid 0 regbit 13
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module AHBS has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 19 regid 0 regbit 19
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PPE-SSL01 has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 21 regid 0 regbit 21
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PPE-TC has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 22 regid 0 regbit 22
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PPE-EMA has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 23 regid 0 regbit 23
ifx_pmu_set: Module PPE-DPLUSM has been activated 2 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 24 regid 0 regbit 24
ifx_pmu_set: Module PPE-DPLUSS has been activated 2 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 28 regid 0 regbit 28
ifx_pmu_set: Module SWITCH has been activated 3 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 29 regid 0 regbit 29
ifx_pmu_set: Module PPE-TOP has been activated 2 times before
ifx_pmu_set: PMU_PWDCR0 = 0x8611909f module 18 regid 0 regbit 18
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PPE-QSB has been activated 1 times before
[a5 alloc_dma] pre_alloc_desc_total_num=704, line 6150
[turn_on_dma_rx] a5, line 4542
[turn_on_dma_rx] a5, line 4542
IrqConnect : IRQ = 87, Handler = 0x8037DCF8
IrqConnect : IRQ = 88, Handler = 0x8037DE00
Succeeded!
PPE datapath driver info:
  Version ID: 64.3.7.1.0.1.4
  Family    : VR9
  DR Type   : Normal Data Path | Indirect-Fast Path
  Interface : MII0 | MII1 | ATM
  Mode      : Routing
  Release   : 0.1.4
PPE firmware info:
  Version ID: 7.2.4.6.1.17
  Family    : VR9
  FW Type   : Acceleration
  Interface : MII0/1 + ATM
  Mode      : Bridging + IPv4 Routing
  Release   : 1.17
[switch_utility] cmd=Enable
[switch_utility] switch_utility, Enable,
[switch_utility] cmd=CfgSet 3 1 1542 0 00:00:00:00:00:00
[switch_utility] switch_utility, CfgSet, 3, 1, 1542, 0, 00:00:00:00:00:00,
[switch_utility] cmd=RegisterSet 0x453 0x0
[switch_utility] switch_utility, RegisterSet, 0x453, 0x0,
[switch_utility] cmd=RegisterSet 0x454 0x07f
[switch_utility] switch_utility, RegisterSet, 0x454, 0x07f,
[switch_utility] cmd=RegisterSet 0x455 0x07f
[switch_utility] switch_utility, RegisterSet, 0x455, 0x07f,
[switch_utility] cmd=RegisterSet 0xc4B 0x3F
[switch_utility] switch_utility, RegisterSet, 0xc4B, 0x3F,
[switch_utility] cmd=RegisterSet 0xc4C 0x105
[switch_utility] switch_utility, RegisterSet, 0xc4C, 0x105,
[switch_utility] cmd=RegisterSet 0xc55 0x1800
[switch_utility] switch_utility, RegisterSet, 0xc55, 0x1800,
[switch_utility] cmd=RegisterSet 0xc54 0x1801
[switch_utility] switch_utility, RegisterSet, 0xc54, 0x1801,
[switch_utility] cmd=RegisterSet 0xc53 0x1811
[switch_utility] switch_utility, RegisterSet, 0xc53, 0x1811,
[switch_utility] cmd=RegisterSet 0xC52 0x1812
[switch_utility] switch_utility, RegisterSet, 0xC52, 0x1812,
[switch_utility] cmd=RegisterSet 0xc51 0x1813
[switch_utility] switch_utility, RegisterSet, 0xc51, 0x1813,
[switch_utility] cmd=RegisterSet 0xC50 0x1814
[switch_utility] switch_utility, RegisterSet, 0xC50, 0x1814,
[switch_utility] cmd=RegisterSet 0x903 0x180
[switch_utility] switch_utility, RegisterSet, 0x903, 0x180,
[switch_utility] cmd=RegisterSet 0x90F 0x180
[switch_utility] switch_utility, RegisterSet, 0x90F, 0x180,
[switch_utility] cmd=RegisterSet 0x93F 0x180
[switch_utility] switch_utility, RegisterSet, 0x93F, 0x180,
[switch_utility] cmd=RegisterSet 0x91B 0x180
[switch_utility] switch_utility, RegisterSet, 0x91B, 0x180,
[switch_utility] cmd=RegisterSet 0x933 0x180
[switch_utility] switch_utility, RegisterSet, 0x933, 0x180,
[switch_utility] cmd=RegisterSet 0x927 0x180
[switch_utility] switch_utility, RegisterSet, 0x927, 0x180,
[switch_utility] cmd=RegisterSet 0x94B 0x180
[switch_utility] switch_utility, RegisterSet, 0x94B, 0x180,
[switch_utility] cmd=PortLinkCfgSet 0 0 0 0 1000 0 0 3 0 0
[switch_utility] switch_utility, PortLinkCfgSet, 0, 0, 0, 0, 1000, 0, 0, 3, 0, 0,
[switch_utility] cmd=PortLinkCfgSet 1 0 0 0 1000 0 0 3 0 0
[switch_utility] switch_utility, PortLinkCfgSet, 1, 0, 0, 0, 1000, 0, 0, 3, 0, 0,
[switch_utility] cmd=PortLinkCfgSet 5 0 0 0 100 0 0 0 1 0
[switch_utility] switch_utility, PortLinkCfgSet, 5, 0, 0, 0, 100, 0, 0, 0, 1, 0,
[switch_utility] cmd=PortLinkCfgSet 2 0 0 0 100 0 0 0 1 0
[switch_utility] switch_utility, PortLinkCfgSet, 2, 0, 0, 0, 100, 0, 0, 0, 1, 0,
[switch_utility] cmd=PortLinkCfgSet 3 0 0 0 100 0 0 0 1 0
[switch_utility] switch_utility, PortLinkCfgSet, 3, 0, 0, 0, 100, 0, 0, 0, 1, 0,
[switch_utility] cmd=PortLinkCfgSet 4 0 0 0 100 0 0 0 1 0
[switch_utility] switch_utility, PortLinkCfgSet, 4, 0, 0, 0, 100, 0, 0, 0, 1, 0,
[switch_utility] cmd=RegisterSet 0xc77 0xc001
[switch_utility] switch_utility, RegisterSet, 0xc77, 0xc001,
[switch_utility] cmd=RegisterSet 0xc79 0xc001
[switch_utility] switch_utility, RegisterSet, 0xc79, 0xc001,
[switch_utility] cmd=RegisterSet 0xc81 0xc001
[switch_utility] switch_utility, RegisterSet, 0xc81, 0xc001,
[switch_utility] cmd=RegisterSet 0x4A 0x11C
[switch_utility] switch_utility, RegisterSet, 0x4A, 0x11C,
[switch_enable_igmp_snooping] gSetting.IGMP_Snooping=1
[switch_utility] cmd=MulticastRouterPortAdd 6
[switch_utility] switch_utility, MulticastRouterPortAdd, 6,
[switch_utility] cmd=MulticastSnoopCfgSet 2 1 0 3 6 1 3 100 2 1 1
[switch_utility] switch_utility, MulticastSnoopCfgSet, 2, 1, 0, 3, 6, 1, 3, 100, 2, 1, 1,
[switch_utility] cmd=MulticastTableEntryAdd 4 0 224.0.0.1 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 4, 0, 224.0.0.1, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 5 0 224.0.0.1 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 5, 0, 224.0.0.1, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 2 0 224.0.0.1 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 2, 0, 224.0.0.1, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 3 0 224.0.0.1 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 3, 0, 224.0.0.1, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 0 0 224.0.0.1 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 0, 0, 224.0.0.1, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 6 0 224.0.0.1 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 6, 0, 224.0.0.1, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 4 0 224.0.0.2 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 4, 0, 224.0.0.2, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 5 0 224.0.0.2 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 5, 0, 224.0.0.2, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 2 0 224.0.0.2 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 2, 0, 224.0.0.2, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 3 0 224.0.0.2 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 3, 0, 224.0.0.2, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 0 0 224.0.0.2 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 0, 0, 224.0.0.2, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 6 0 224.0.0.2 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 6, 0, 224.0.0.2, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 4 0 224.0.0.22 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 4, 0, 224.0.0.22, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 5 0 224.0.0.22 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 5, 0, 224.0.0.22, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 2 0 224.0.0.22 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 2, 0, 224.0.0.22, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 3 0 224.0.0.22 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 3, 0, 224.0.0.22, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 0 0 224.0.0.22 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 0, 0, 224.0.0.22, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 6 0 224.0.0.22 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 6, 0, 224.0.0.22, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 4 0 239.255.255.250 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 4, 0, 239.255.255.250, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 5 0 239.255.255.250 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 5, 0, 239.255.255.250, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 2 0 239.255.255.250 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 2, 0, 239.255.255.250, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 3 0 239.255.255.250 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 3, 0, 239.255.255.250, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 0 0 239.255.255.250 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 0, 0, 239.255.255.250, 0.0.0.0, 2,
[switch_utility] cmd=MulticastTableEntryAdd 6 0 239.255.255.250 0.0.0.0 2
[switch_utility] switch_utility, MulticastTableEntryAdd, 6, 0, 239.255.255.250, 0.0.0.0, 2,
[switch_utility] cmd=PCE_RuleDelete 50
[switch_utility] switch_utility, PCE_RuleDelete, 50,
[switch_utility] cmd=PCE_RuleDelete 51
[switch_utility] switch_utility, PCE_RuleDelete, 51,
[switch_utility] cmd=PCE_RuleDelete 52
[switch_utility] switch_utility, PCE_RuleDelete, 52,
[switch_utility] cmd=PCE_RuleDelete 53
[switch_utility] switch_utility, PCE_RuleDelete, 53,
[switch_utility] cmd=PCE_RuleDelete 54
[switch_utility] switch_utility, PCE_RuleDelete, 54,
[switch_utility] cmd=PCE_RuleDelete 55
[switch_utility] switch_utility, PCE_RuleDelete, 55,
[switch_utility] cmd=PCE_RuleWrite 9 1 1 6 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0 0 00:00:00:00:00:00 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0  
0 0.0.0.0 0 1 2048 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0
[switch_utility] switch_utility, PCE_RuleWrite, 9, 1, 1, 6, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0, 0, 00:00:00:00:00:00, 0 , 0, 0,
0, 0, 0, 0, 0, 0, 0, 0.0.0.0, 0, 0, 0.0.0.0, 0, 1, 2048, 0, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0 , 0, 0, 0, 0, 0, 0, 0,
[switch_utility] cmd=PCE_RuleWrite 10 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 4608 1 3 0 0 0 0 0
00 0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0
[switch_utility] switch_utility, PCE_RuleWrite, 10, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1,
4608, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0,  0, 0, 0, 0, 0, 4, 64,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
[switch_utility] cmd=PCE_RuleWrite 11 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 4864 1 3 0 0 0 0 0 00
0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0
[switch_utility] switch_utility, PCE_RuleWrite, 11, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1,
4864, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0,  0, 0, 0, 0, 0, 4, 64,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
[switch_utility] cmd=PCE_RuleWrite 12 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 5632 1 3 0 0 0 0 0 00
0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0
[switch_utility] switch_utility, PCE_RuleWrite, 12, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1,
5632, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0,  0, 0, 0, 0, 0, 4, 64,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
[switch_utility] cmd=PCE_RuleWrite 13 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 5888 1 3 0 0 0 0 0 00
0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0
[switch_utility] switch_utility, PCE_RuleWrite, 13, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1,
5888, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0,  0, 0, 0, 0, 0, 4, 64,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
[switch_utility] cmd=PCE_RuleWrite 14 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 8704 1 3 0 0 0 0 0 00
0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0
[switch_utility] switch_utility, PCE_RuleWrite, 14, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1,
8704, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0,  0, 0, 0, 0, 0, 4, 64,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
[switch_utility] cmd=PCE_RuleWrite 15 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 4352 1 3 0 0 0 0 0 00
0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0
[switch_utility] switch_utility, PCE_RuleWrite, 15, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1,
4352, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0,  0, 0, 0, 0, 0, 4, 64,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
[mac_0_init] VLAN port: 0x001d, ifCount=1
[mac_0_init] ------->add port 4 to vlan 1
[mac_0_init] ------->add port 2 to vlan 1
[mac_0_init] ------->add port 3 to vlan 1
[mac_0_init] ------->add port 0 to vlan 1
[config_SW_VLAN] bTaggedIngress=0, bTaggedEgress=0
[switch_utility] cmd=VLAN_IdCreate 50 1
[switch_utility] switch_utility, VLAN_IdCreate, 50, 1,
[switch_utility] cmd=VLAN_PortCfgSet 6 50 0 0 3 0 0
[switch_utility] switch_utility, VLAN_PortCfgSet, 6, 50, 0, 0, 3, 0, 0,
[switch_utility] cmd=VLAN_IdCreate 1 1
[switch_utility] switch_utility, VLAN_IdCreate, 1, 1,
[switch_utility] cmd=VLAN_PortCfgSet 0 1 0 0 3 0 0
[switch_utility] switch_utility, VLAN_PortCfgSet, 0, 1, 0, 0, 3, 0, 0,
[switch_utility] cmd=VLAN_PortCfgSet 2 1 0 0 3 0 0
[switch_utility] switch_utility, VLAN_PortCfgSet, 2, 1, 0, 0, 3, 0, 0,
[switch_utility] cmd=VLAN_PortCfgSet 3 1 0 0 3 0 0
[switch_utility] switch_utility, VLAN_PortCfgSet, 3, 1, 0, 0, 3, 0, 0,
[switch_utility] cmd=VLAN_PortCfgSet 4 1 0 0 3 0 0
[switch_utility] switch_utility, VLAN_PortCfgSet, 4, 1, 0, 0, 3, 0, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 1 0 0
[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 0, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 1 2 0
[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 2, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 1 3 0
[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 3, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 1 4 0
[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 4, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 1 6 1
[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 6, 1,
mac_0_init: interface 1 registered to VLAN 1, port_mask=1d
MAC Address(ifno 1): 1c:c6:3c:67:a3:7f
***** [iput_IpLinkUp] ifno=1, link_type:12
br_MacAddress=1C-C6-3C-67-A3-7F
Interface 1 ip = 192.168.1.1

gConfig.Interface[2].IP_Addr = 0.0.0.0
gConfig.Interface[2].Subnet_Mask = 0.0.0.0
gConfig.Interface[2].Description = WLAN
gConfig.Interface[2].Framing =
gConfig.Interface[2].VLAN_Idx = 0
ifp->ipaddr = C0A80101
ifp->netmask = FFFFFF00
gConfig.Vlan_Ports[gConfig.Interface[2].VLAN_Idx].VNet = 1
gConfig.Vlan_Ports[gConfig.Interface[2].VLAN_Idx].IGMP_Querier_Enable = 0
[IfInit] ifno=2, gConfig.Interface[2].vlan_tagged=0, line 693
hwlan_init(85): [HWLAN] ifno=2 irno=7 port=0x00000000
[hwlan_init] if_table[2]::1c-c6-3c-67-a3-80
***** [iput_IpLinkUp] ifno=2, link_type:12
Interface 2 ip = 192.168.1.1

gConfig.Interface[3].IP_Addr = 0.0.0.0
gConfig.Interface[3].Subnet_Mask = 0.0.0.0
gConfig.Interface[3].Description = ATM1
gConfig.Interface[3].Framing = AAL5
[IfInit] ifno=3, gConfig.Interface[3].vlan_tagged=0, line 693
[sar_0_init] ifno=3, T_WAN_INT=3, sar_init=0, g_atm_priv_data.max_connections=15
ATM_UBR
[ppe_open] g_atm_priv_data.connection_table=0
[turn_on_dma_rx] a5, line 4542
[ppe_open] (8.32): conn = 0, f_enable_irq=1
[sar_0_init] index=0, ifno=3, f_llc=1
[mpoa_setup] mpoa_type=0, f_llc=1
[sar_0_init] Init SAR ifno:3 g_atm_vcc[0] CONN:0 VPI/VCI:8/32 PORT:0
[sar_0_init] sar ifno: 3, flag: 0x00000200, up, sar_init=0
MAC Address: 1c:c6:3c:67:a3:7e
[switch_utility] cmd=VLAN_IdCreate 2 2
[switch_utility] switch_utility, VLAN_IdCreate, 2, 2,
[switch_utility] cmd=VLAN_IdCreate 20 2
[switch_utility] switch_utility, VLAN_IdCreate, 20, 2,
[switch_utility] cmd=VLAN_PortCfgSet 11 2 0 0 3 0 1
[switch_utility] switch_utility, VLAN_PortCfgSet, 11, 2, 0, 0, 3, 0, 1,
[switch_utility] cmd=VLAN_PortCfgSet 10 20 0 0 3 0 1
[switch_utility] switch_utility, VLAN_PortCfgSet, 10, 20, 0, 0, 3, 0, 1,
[switch_utility] cmd=VLAN_PortMemberAdd 2 11 0
[switch_utility] switch_utility, VLAN_PortMemberAdd, 2, 11, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 20 10 0
[switch_utility] switch_utility, VLAN_PortMemberAdd, 20, 10, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 20 6 1
[switch_utility] switch_utility, VLAN_PortMemberAdd, 20, 6, 1,
[switch_utility] cmd=VLAN_PortMemberAdd 2 6 1
[switch_utility] switch_utility, VLAN_PortMemberAdd, 2, 6, 1,
[switch_utility] cmd=VLAN_PortMemberAdd 50 10 0
[switch_utility] switch_utility, VLAN_PortMemberAdd, 50, 10, 0,
[switch_utility] cmd=MAC_TableEntryAdd 2 6 0 1 00:00:00:00:00:00
[switch_utility] switch_utility, MAC_TableEntryAdd, 2, 6, 0, 1, 00:00:00:00:00:00,
Interface 3 ip = 0.0.0.0

gConfig.Interface[4].IP_Addr = 0.0.0.0
gConfig.Interface[4].Subnet_Mask = 0.0.0.0
gConfig.Interface[4].Description = ATM2
gConfig.Interface[4].Framing = AAL5
gConfig.Interface[4].VLAN_Idx = 1
ifp->ipaddr = C0A80201
ifp->netmask = FFFFFF00
gConfig.Vlan_Ports[gConfig.Interface[4].VLAN_Idx].VNet = 0
gConfig.Vlan_Ports[gConfig.Interface[4].VLAN_Idx].IGMP_Querier_Enable = 0
[IfInit] ifno=4, gConfig.Interface[4].vlan_tagged=0, line 693
[sar_0_init] ifno=4, T_WAN_INT=3, sar_init=1, g_atm_priv_data.max_connections=15
ATM_VBR_NRT
[ppe_open] g_atm_priv_data.connection_table=1
[ppe_open] (8.38): conn = 1, f_enable_irq=0
[sar_0_init] index=1, ifno=4, f_llc=1
[mpoa_setup] mpoa_type=0, f_llc=1
[sar_0_init] Init SAR ifno:4 g_atm_vcc[1] CONN:1 VPI/VCI:8/38 PORT:0
[sar_0_init] sar ifno: 4, flag: 0x00000220, up, sar_init=1
MAC Address: 1c:c6:3c:67:a3:7f
[sar_0_ioctl] ifno 4 up/down 0  ->br_MacAddress=1C-C6-3C-67-A3-7F
Interface 4 ip = 192.168.2.1

[sar_0_ioctl] ifno 4 up/down 0  ->gConfig.Interface[20].IP_Addr = 192.168.1.1
gConfig.Interface[20].Subnet_Mask = 255.255.255.0
gConfig.Interface[20].Description = LAN2
gConfig.Interface[20].Framing =
gConfig.Interface[20].VLAN_Idx = 1
ifp->ipaddr = C0A80201
ifp->netmask = FFFFFF00
gConfig.Vlan_Ports[gConfig.Interface[20].VLAN_Idx].VNet = 0
gConfig.Vlan_Ports[gConfig.Interface[20].VLAN_Idx].IGMP_Querier_Enable = 0
[IfInit] ifno=20, gConfig.Interface[20].vlan_tagged=0, line 693
[mac_0_init] ifno=20, vlan=1, vid=3, port_mask=0x2, mac_0_initialized=1
[mac_0_init] VLAN port: 0x0002, ifCount=2
[mac_0_init] ------->add port 5 to vlan 3
[config_SW_VLAN] bTaggedIngress=0, bTaggedEgress=0
[switch_utility] cmd=VLAN_IdCreate 3 3
[switch_utility] switch_utility, VLAN_IdCreate, 3, 3,
[switch_utility] cmd=VLAN_PortCfgSet 5 3 0 0 3 0 0
[switch_utility] switch_utility, VLAN_PortCfgSet, 5, 3, 0, 0, 3, 0, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 3 5 0
[switch_utility] switch_utility, VLAN_PortMemberAdd, 3, 5, 0,
[switch_utility] cmd=VLAN_PortMemberAdd 3 6 1
[switch_utility] switch_utility, VLAN_PortMemberAdd, 3, 6, 1,
mac_0_init: interface 20 registered to VLAN 3, port_mask=2
MAC Address(ifno 20): 1c:c6:3c:67:a3:7f
***** [iput_IpLinkUp] ifno=20, link_type:12
Interface 20 ip = 192.168.2.1

gConfig.Interface[27].IP_Addr = 0.0.0.0
gConfig.Interface[27].Subnet_Mask = 0.0.0.0
gConfig.Interface[27].Description = COM1
gConfig.Interface[27].Framing =
pppInit> set (PPPShutdownRequest[ifno] = 0)
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> if_umts_init 27 <<<<<<<<<
if_umts_init() WAN interface 27, UMTS-COM1: baudrate=115200
if_umts_init() MAC:1C:C6:3C:67:A3:7F
RUNTASK id=2 umtsEventHandleTsk...
RUNTASK id=3 umtsEventExeHandleTsk...
umtsReceQueueInit() Host controller disable, bypass queue init...
RUNTASK id=4 umtsReceQueueTsk...
RUNTASK id=5 umtsReceTsk...
RUNTASK id=6 umtsWritTsk...
Interface 27 ip = 0.0.0.0

ruleCheck()> Group: 0,  Error: Useless rule index will be truncated, from idx:2
ruleCheck()> Group: 1,  Error: Useless rule index will be truncated, from idx:22
ruleCheck()> Group: 2,  Error: Useless rule index will be truncated, from idx:0
CBAC rule format check succeed !!
reqCBACBuf()> init match pool, Have: 1000
Memory Address: 0xffffffff867e6184 ~ 0xffffffff867ecf00
reqCBACBuf()> init timeGap pool, Have: 10000
Memory Address: 0xffffffff867ecf00 ~ 0xffffffff8681dc54
reqCBACBuf()> init sameHost pool, Have: 2000
Memory Address: 0xffffffff8681dc54 ~ 0xffffffff8682d674
CBAC rule pool initialized !!
[init_if] local_if_mask=0x7f80007
[init_if] local_wiredif_mask=0x780002
[init_if] local_wirelessif_mask=0x7800004
[init_if] localorVPN_if_mask=0x7f80007
Init NAT data structure
RUNTASK id=7 if_task if0...
RUNTASK id=8 if_task if1...
RUNTASK id=9 if_task if2...
RUNTASK id=10 if_task if3...
RUNTASK id=11 if_task if4...
RUNTASK id=12 if_task if20...
RUNTASK id=13 if_task if27...
RUNTASK id=14 timer_task...
RUNTASK id=15 conn_mgr...
RUNTASK id=16 main_8021x...
Build Day = Mar  9 2012
RUNTASK id=17 saveRandomSeedTask...
[VFS_init] Start...
[VFS_init] vfsState:1
vfs_codepage_init() TimeZone:25, vfs_cp_idx:25, vfs_cp_ID:1
fat_codePageInit() TimeZone:25, codePage:Unknown, cPID:1, cpSize:256, toUpSize:0
ntfs_codepage timezone:25, lan= 0
ntfs_codePageInit() TimeZone:25, codePage:1
==[vfs_register_filesystem]============================
list size:1,  Method:0x807fc15c
  1) Type:0xfc, Name:BRN-VFS
=================================================================
[VFS_init] VFS ROOT FS init OK
==[vfs_register_filesystem]============================
list size:7,  Method:0x807fc35c
  1) Type:0x01, Name:FAT12
  2) Type:0x04, Name:FAT16
  3) Type:0x06, Name:FAT16
  4) Type:0x0b, Name:FAT32
  5) Type:0x0c, Name:FAT32
  6) Type:0x0e, Name:FAT16
  7) Type:0x81, Name:Minix
=================================================================
[VFS_init] FAT init OK
==[vfs_register_filesystem]============================
list size:1,  Method:0x807fcf64
  1) Type:0x07, Name:NTFS/HPFS
=================================================================
[VFS_init] NTFS init OK
[VFS_init]-[vfs_mount_root] Start...
[VFS_init]-[vfs_mount_root] Init <root> OK...
[VFS_init]-[vfs_mount_root] Init <dev> OK...
[VFS_init]-[vfs_mount_root] Init <mnt> OK...
[0-START]=========================================
  Node 000-[\],  DIR, MountFlag:0x00
[0-END]===========================================
  [1-START]=========================================
    Node 001-[dev],  DIR, MountFlag:0x00
  [1-END]===========================================
  [1-START]=========================================
    Node 002-[mnt],  DIR, MountFlag:0x00
  [1-END]===========================================
dump_inode() freeCnt:77, usedCnt:3
RUNTASK id=18 fileChange_eventTsk()...
[USB-INIT] main() ====== call UsbSysInit() ...
[USB] UsbSPoolArray: 86522CD4H ~ 8667BAD3, UsbSPool:86522CE0
[USB] UsbMPoolArray: 85DC2D88H ~ 86522887, UsbMPool:85DC2DA0
[USB] UsbLPoolArray: 86682104H ~ 866DF923, UsbLPool:86682120
[USB] Small  Un-Cached Memory(8025): 86522CE0 ~ 8667BA0F
[USB] Medium Un-Cached Memory(470): 85DC2DA0 ~ 8651E85F
[USB] Large  Un-Cached Memory(21): 86682120 ~ 866DB51F
setUsbPciInfo() cpu_to_usb_addr_shift[5]:0x00000000, usb_to_cpu_addr_shift[5]:0x00000000
usb_pci_probe() Found Synopsis OTG-1, baseAddr:0xbe101000, IRQ:54
setUsbPciInfo() cpu_to_usb_addr_shift[6]:0x00000000, usb_to_cpu_addr_shift[6]:0x00000000
usb_pci_probe() Found Synopsis OTG-2, baseAddr:0xbe106000, IRQ:83
usb_hcd_init() probe PCI function:2 !!
otg_host_power_set() USB Host0 Power OFF
usb_host_power_set() isOn:1
usb_host_power_set() Previous power off:0, current time:0
usb_host_power_set(1) min time delay:6000, current delay:0
usb_host_power_set() Need delay:6500 **********0
usb_host_power_set(2) min time delay:6000, current delay:0
dwc_otg_vbus_on(NULL) Enable USB power!!
otg_host_power_set() USB Host1 Power OFF
usb_host_power_set() isOn:1
usb_hcd_init() func(0):0
usb_hcd_init() func(1):0
usb_hcd_init() func(2):0
usb_hcd_init() func(3):0
usb_hcd_init() func(4):0
usb_hcd_init() func(5):1
localhc_init() install otg driver(host_drv = 0x809201F8, otg_driver=0x809201F8).
usb_hcd_init() func(6):1
localhc_init() install otg driver(host_drv = 0x809201F8, otg_driver=0x809201F8).
usb_hcd_init(): succ.
[USB-INIT] main() ====== after call UsbSysInit()
InitCommSys: RESOURCE_BASE = 141, NUMRES = 640
InitCommSys: EVENT_BASE = 339, NUMEVT = 818
InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64
RUNTASK id=20 period_task...
[Dhcpd_Start]
RUNTASK id=21 dhcp_daemon...
RUNTASK id=22 dhcp_clt... on interface 3
main()> usb:1, ftp:0
Primary image: 0, flash area 1
found signature: 78h 56h 34h 12h
ulImgLens=2228032, LENGTH[1]-12=6291444, type:0
length checking OK
[0]2 find End at 0xFFFFFFFFB149FC00 len=2228032, type=0
found signature: 78h 56h 34h 12h
ulImgLens=1384128, LENGTH[1]-12=6291444, type:10
length checking OK
[1]2 find End at 0xFFFFFFFFB15F1C00 len=1384128, type=10
found signature: 78h 56h 34h 12h
ulImgLens=243042, LENGTH[1]-12=6291444, type:11
length checking OK
[2]2 find End at 0xFFFFFFFFB162D400 len=243042, type=11
found signature: 78h 56h 34h 12h
ulImgLens=238377, LENGTH[1]-12=6291444, type:12
length checking OK
[3]2 find End at 0xFFFFFFFFB1667800 len=238377, type=12
---[ LZMA head start in 0xFFFFFFFFB1667C00 ]---
found signature: 78h 56h 34h 12h
ulImgLens=348593, LENGTH[1]-12=6291444, type:50
length checking OK
[4]2 find End at 0xFFFFFFFFB16BCC00 len=348593, type=50
---[ LZMA head start in 0xFFFFFFFFB16BD000 ]---
found signature: 78h 56h 34h 12h
ulImgLens=363500, LENGTH[1]-12=6291444, type:90
length checking OK
[5]2 find End at 0xFFFFFFFFB1715C00 len=363500, type=90
Image[1] at 0xB1280000, len=2228032, type=0
Image[2] at 0xB14A0000, len=1384128, type=10
Image[3] at 0xB15F2000, len=243042, type=11
Image[4] at 0xB162D800, len=238377, type=12
Image[5] at 0xB1667C00, len=348593, type=50
Image[6] at 0xB16BD000, len=363500, type=90
[get_web_address] Web-0:  addr:0xb14a0000, len:1384128, type:10
[get_web_address] Web-1:  addr:0xb15f2000, len:243042, type:11
[get_web_address] Web-2:  addr:0xb162d800, len:238377, type:12
getUnZipFileLength: [ZIP 3]
getUnZipFileLength: [ZIP 1]
Unzipping from B14A0000 to 87C77800 ... [ZIP 3] [ZIP 2] done
Uncompressed size = 2655424
getUnZipFileLength: [ZIP 3]
getUnZipFileLength: [ZIP 1]
[absread] flash_init: pfs image found at ffffffffb15f2000, size is 1317384 bytes
Unzipping from B15F2000 to 87B35A00 ... [ZIP 3] [ZIP 2] done
Uncompressed size = 1317384
RUNTASK httpd...
RUNTASK id=28 SSLClient ...
g_Client_Cert_Array=0x82bad3e0
RUNTASK id=29 dnsproxy...
startNBIOSTask()...
RUNTASK id=30 nbios_main...
RUNTASK id=31 padmin_task_entry...
RUNTASK id=32 dhcpd_mgmt_task...
runDDNS() ddns_enable:0, DDNSTaskRun:0, needReRunDDNS:1
UPnP task run-up... upnpFunc:1
UPNP Device initialize success! slot=33
TR64 is enabled
TR64 Device initialize success! slot=34
update_device_OUI: OUI_str=1CC63C
[0] Allocate mailbox 6
[0] Allocate mailbox 7
Begin search NamePath = InternetGatewayDevice.DeviceInfo.FirstUseDateBegin search NamePath =
InternetGatewayDevice.DeviceInfo.Fir stUseDateFirstUseDate:2012-03-09T00:01:02
UART RX Input
Starting Multitask...

rzMemory start: 0x82A4DBD0, end 0x82BAD3D0, size 1439744RUNTASK id=37 xdsl_mgmt_task...
[0] Allocate resource 141, FreeResource = 1
ifx_pmu_set: PMU_PWDCR0 = 0x8611909f module 8 regid 0 regbit 8
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module SPI has been activated 1 times before
[KERN_INFO]IFX SSC driver, version 2.1.3, (c)2009 Infineon Technologies AG

call ifx_ssc_init() = 0
ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 12 regid 0 regbit 12
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module GPTC has been activated 1 times before
[KERN_INFO]gptu: totally 6 16-bit timers/counters
IrqConnect : IRQ = 118, Handler = 0x80356F50
[KERN_INFO]gptu: succeeded to request irq 118
IrqConnect : IRQ = 119, Handler = 0x80356F50
[KERN_INFO]gptu: succeeded to request irq 119
IrqConnect : IRQ = 120, Handler = 0x80356F50
[KERN_INFO]gptu: succeeded to request irq 120
IrqConnect : IRQ = 121, Handler = 0x80356F50
[KERN_INFO]gptu: succeeded to request irq 121
IrqConnect : IRQ = 122, Handler = 0x80356F50
[KERN_INFO]gptu: succeeded to request irq 122
IrqConnect : IRQ = 123, Handler = 0x80356F50
[KERN_INFO]gptu: succeeded to request irq 123
 do_div error ???
[KERN_INFO]ifx_gptu_timer_set(4, 16000), divider = 15625000
request_timer(4, 0x0000010D, 15625000)
[KERN_INFO]request_timer(4, 0x0000010D, 15625000)...ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 12 regid 0 regbit 12
ifx_pmu_set: Module GPTC has been activated 2 times before
successful!
Init timer (4) - OK
 do_div error ???
[KERN_INFO]ifx_gptu_timer_set(6, 100000), divider = 2500000
request_timer(6, 0x0000010D, 2500000)
[KERN_INFO]request_timer(6, 0x0000010D, 2500000)...successful!
Init timer (6) - OK
RUNTASK id=39 apAppInit...
RUNTASK id=42 vinax_task...
start http redir.
RUNTASK id=43 hr_daemon...
RUNTASK id=44 hr_misc_daemon...

--> vinax_task() started ...
<6>ADM5120 Board Driver, Version 0.0.4.1
<6>(c) Copyright 2003, Infineon Technologies AG
Board_InitIrq!
Board_InitIrq!
--> drv_danube_rb_init() finished ...
MEI CPE Driver, Version 1.0.2
(c) Copyright 2009, Infineon Technologies AG
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
Using major number 0
ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 9 regid 0 regbit 9
ifx_pmu_set: Module DSL-DFE has been activated 2 times before
--> drv_vinax_init() finished ...
xSpeedtsk priority is 80
--> DSL_ModuleInit() finished ...
-->VINAX control device open finished ...
T >> init dev: base address = 0xBE116000
T >> parse: opt value = 99
T >> open device: /dev/mei_cpe/0.
T >> ioct(FIO_MEI_DEV_INIT): baseaddr = 0xBE116000, IRQ = 99
pInitDev->meiBaseAddr=0xbe116000
hwVers=0x230
MEI_DRV[00]: INIT DEVICE - NO INTERUPTS --> ACTIVE POLL MODE
MEI_DRV[00]: Start Driver Control Thread
##### [IFXOS_ThreadInit] name <VnxCtrl>, tid 48, nStackSize=10000
T >> Line = 00 Return = 0
T >> MEI DBG WrOff: 0x000E2000
T >> MEI DBG Dest: 0x00000002
T >> Value: 0x00000001
T >> open device: /dev/mei_cpe/0.
T >> ioct(.., FIO_MEI_DBG_WRITE, ..): off=0x000E2000, des=2, count=1
T >> DBG Dest[2] Write[0x000E2000] = 0x81D46638
T >> DONE - ioct(.., FIO_MEI_DBG_WRITE, ..)
T >> Line = 00 Return = 0
--> drv_vinax_cfg() finished ...
[DSL_CPE_ArgParse] fw1 name=
Image[1] at 0xB1280000, len=2228032, type=0
Image[2] at 0xB14A0000, len=1384128, type=10
Image[3] at 0xB15F2000, len=243042, type=11
Image[4] at 0xB162D800, len=238377, type=12
Image[5] at 0xB1667C00, len=348593, type=50
Image[6] at 0xB16BD000, len=363500, type=90
[get_datapump_address] Datapump for Annex A0:4, B0:-1, C0:-1
[get_datapump_address] Datapump for Annex A1:-1, B1:-1, C1:-1
[get_datapump_address] r_img=4, t_img=6
Unzip VDSL2 firmware ...
Unzipping from B1667C00 to 866E3800 ... [ZIP 2] done
Uncompressed size = 775540
   ###ERROR: VDSL image exceed its buffer!!!
DSL_CPE_Open called
DSL_DRV_Open called
DSL_DRV_HandleInit called
DSL_CPE: Device /dev/dsl_cpe_api/0 opened successfully
DSL_FIO_VERSION_INFORMATION_GET=0xc0247204 in control
DSL_FIO_INSTANCE_CONTROL_SET=0xc00c7224 in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in control
DSL_CPE: Firmware WHAT String1: V_5.3.2.8.1.6
DSL_CPE: Firmware AppType: 6
DSL_CPE: Firmware WHAT String2: 5.4.1.A.1.1
DSL_CPE: Firmware AppType: 1
DSL_CPE: Firmware features (vcpe_hw.bin): 0x5
ANNEX A in DSL_CPE_DeviceInit
pData->data.pFirmware=0x866e3800
pData->data.nFirmwareSize=0xbd574
DSL_DRV_FwDownload called
pCurr->eventWaitQueue=47
DSL_FW_REQUEST_ADSL in DSL_DRV_DEV_FwDownload
hwVers=0x230
ifno2dot1x_if[2]=0
ifno2dot1x_if[23]=81
dot1x_wireless_if_mask=0x800004
fwrite_specialConfigPara() Save random seed:6793020
dns_table[0] name = "Livebox";
dns_table[0] ip = "192.168.1.1";
dns_table[0] fixed=1, ttl=3600000;
init psock cnt=1
ProDAAInitialize: SPI INIT first now ProSlicID -2103127660 ProSlicCS 1
Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
[50] Allocate mailbox 8
TAPI_init_task_queue: enter loop..8
hwVers=0x230
MEI_InternalFirmwareDownload called
DSL_CPE: User Thread Startup <evnthnd>, TID 49 (PID 49) - ENTER
evtWaitQue=47
RUNTASK id=17 Metalink_NetTask ...
[40] Allocate mailbox 9
[40] Allocate mailbox 10
[40] Allocate mailbox 11
[40] Allocate mailbox 12
[40] Allocate mailbox 13
[40] Allocate mailbox 14
[40] Allocate mailbox 15
[40] Allocate mailbox 16
[40] Allocate mailbox 17
[40] Allocate mailbox 18
[40] Allocate mailbox 19
[40] Allocate mailbox 20
[40] Allocate mailbox 21
[40] Allocate mailbox 22
[40] Allocate mailbox 23
[40] Allocate mailbox 24
[40] Allocate resource 142, FreeResource = 2
ifx_tapi_KPI_IngressThread() check: [TAPIkpi_in],803FBD08,pid=0, 51
##### [IFXOS_ThreadInit] name <TAPIkpi_in>, tid 51, nStackSize=8000
[40] Allocate resource 143, FreeResource = 3
Lantiq MIPS34KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
request_timer(2, 0x000001AE, 1)
[KERN_INFO]request_timer(2, 0x000001AE, 1)...successful!
ifx_mps_init_gpt() - calibration done, waited 626 loops!
ifx_mps_init_structures request_irq 1 146
IrqConnect : IRQ = 146, Handler = 0x8041E450
ifx_mps_init_structures request_irq 2 147
IrqConnect : IRQ = 147, Handler = 0x8041E58C
ifx_mps_init_structures request_irq 3 0 142
IrqConnect : IRQ = 142, Handler = 0x8041E634
ifx_mps_init_structures request_irq 3 1 143
IrqConnect : IRQ = 143, Handler = 0x8041E634
ifx_mps_init_structures request_irq 3 2 144
IrqConnect : IRQ = 144, Handler = 0x8041E634
ifx_mps_init_structures request_irq 3 3 145
IrqConnect : IRQ = 145, Handler = 0x8041E634
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 1
ifx_tapi_DeviceCreate: ndev = 0, TapiDev 82A42240
[40] Allocate resource 144, FreeResource = 4
ifx_tapi_ChannelPrepare: nChannel 0
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 2
ifx_tapi_ChannelPrepare: nChannel 1
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 3
ifx_tapi_ChannelPrepare: nChannel 2
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 4
ifx_tapi_ChannelPrepare: nChannel 3
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 5
ifx_tapi_ChannelPrepare: nChannel 4
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 6
ifx_tapi_ChannelPrepare: nChannel 5
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 7
ifx_tapi_ChannelPrepare: nChannel 6
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 8
ifx_tapi_ChannelPrepare: nChannel 7
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 9
[40] Allocate resource 145, FreeResource = 5
Lantiq VMMC device driver, version 1.9.0.4, (c) 2006-2010 Lantiq Deutschland GmbH
vpe1_mem = 200000
stlb = 0, vpe0_wired = 0 vpe1_wired=1
Wired TLB entries for Linux read_c0_wired() = 0
VMMC_Open : Major 122 Minor 10
VMMC_LL_Open: 8121a61c
VMMC_Open --> 82a2fdb4
VMMC_handle[0] : 82a2fdb4
VMMC_Open : Major 122 Minor 11
VMMC_LL_Open: 8121a68c
VMMC_Open --> 82a2fd98
VMMC_handle[1] : 82a2fd98
VMMC_Open : Major 122 Minor 12
VMMC_LL_Open: 8121a6d4
VMMC_Open --> 82a2fd7c
VMMC_handle[2] : 82a2fd7c
VMMC_Open : Major 122 Minor 13
VMMC_LL_Open: 8121a71c
VMMC_Open --> 82a2fd60
VMMC_handle[3] : 82a2fd60
VMMC_Open : Major 122 Minor 14
VMMC_LL_Open: 8121a764
VMMC_Open --> 82a2fd44
VMMC_handle[4] : 82a2fd44
VMMC_Open : Major 122 Minor 15
VMMC_LL_Open: 8121a7ac
VMMC_Open --> 82a2fd28
VMMC_handle[5] : 82a2fd28
VMMC_Open : Major 122 Minor 16
VMMC_LL_Open: 8121a7f4
VMMC_Open --> 82a2fd0c
VMMC_handle[6] : 82a2fd0c
VMMC_Open : Major 122 Minor 17
VMMC_LL_Open: 8121a83c
VMMC_Open --> 82a2fcf0
VMMC_handle[7] : 82a2fcf0
VMMC_Open : Major 122 Minor 18
VMMC_LL_Open: 8121a884
VMMC_Open --> 82a2fcd4
VMMC_handle[8] : 82a2fcd4
[40] Allocate resource 146, FreeResource = 6
[40] Allocate resource 147, FreeResource = 7
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 10
[get_vcpufirmware_address] DSP firmware: [5 -1], dCnt:1
Unzipping from B16BD000 to 852DE9C8 ... [ZIP 2] modem state = 00000000
[xDSL] vinax_modem_state = 0x0000
done
Uncompressed size = 526476
IFX_MPS: Download firmware (size 526476 bytes)...
cpu1_base_addr 87f00000 (0)
VPE loader: VPE1 running successfully
PKCS12_PBE_add>
PKCS12_PBE_add> support RC4
PKCS12_PBE_add> support DES
PKCS12_PBE_add> support RC2
VFS_eventTsk() Event handling task start-up...
[dhcp_clt] enable dhcp client in interface ATM1[3]
[USBLPT] Printer Initialize Fail : Plug Out !!
padmin_task_entry() task running

********** upnp_main() Unsupportted UPnP root device[0]: UPnP

upnp_main(1-0) Run-up UPnP device IGD...
readXML: fname=/igd.xml
TR64DBUG::TR64_Main> Start:
TR64DBUG::TR64_Main> ServiceTable @ 0x808E4630, ServiceNum= 369098752
TR64DBUG::TR64_Init> Start:
[Auto-Cfg VC] Original PVC=8/32, IFNO=3
hr_daemon> port 32769.
[USB] dwc3884_start() Core id:0, funcIdx:5
setSynopsisPower() check clock gating...
pll0 N = 124, M = 8, PLL_BP = 0, PLL_EN = 1
pll1 N = 64, M = 5, K_hi = 467, K_lo = 659, phdiven = 1, dsmsel = 1, modulo = 2 PLL_BP = 0 PLL_EN = 1
pll2 N = 11, M = 0, PLL_BP = 0, PLL_EN = 1
 do_div error ???
pll0_fosc    = 1000000000
 do_div error ???
pll1_fosc    = 392934082
pll2_fosc    = 864000000
cpu clock    = 500000000
DDR clock    = 250000000
FPI bus 1    = 250000000
FPI bus 2    = 250000000
PP32 clock   = 432000000
 do_div error ???
PCI clock    = 33333333
Ethernet MII0= 50000000
Ethernet MII1= 50000000

 *IFX_CGU_IF_CLK 10e08008
USB clock    = 12000000
Clockout0    = 0
Clockout1    = 0
Clockout2    = 0
Clockout3    = 0
ifx_get_fpi_hz 250000000
*IFX_CGU_IF_CLK 10e0800b
setSynopsisPower() set power...
ifx_pmu_set: PMU_PWDCR0 = 0x86118093 module 6 regid 0 regbit 6
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module USB0-CTRL has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x86118093 module 27 regid 0 regbit 27
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module USB1-CTRL has been activated 1 times before
setSynopsisPower() USB PHY configurations...
setSynopsisPower() set PMU...
ifx_pmu_set: PMU_PWDCR0 = 0x86118092 module 0 regid 0 regbit 0
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module USB0-PHY has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x82118092 module 26 regid 0 regbit 26
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module USB1-PHY has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x82118092 module 9 regid 0 regbit 9
ifx_pmu_set: Module DSL-DFE has been activated 3 times before
ifx_pmu_set: PMU_PWDCR0 = 0x82110092 module 15 regid 0 regbit 15
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module AHBM has been activated 1 times before
[USB] dwc3884_start() DWC3884 core version:0x4F54281A, 2.81a, channel:16
[USB] dwc3884_reset(XR9) Reset In, core_id:0
[USB] dwc3884_reset(VR9) IFX_RCU_USB0_CFG:0xBF203018, var:0x00001480
[USB] dwc3884_reset(VR9) IFX_RCU_USB1_CFG:0xBF203034, var:0x00001400
[USB] dwc3884_reset(VR9) IFX_RCU_RST_REQ:0xBF203010
[USB] dwc3884_reset() rstctl:0xBE101010
[USB] dwc3884_start() intsts:0xBE101014, var:0x54000029
ptp Daemon task running
lpd Daemon task running
[USB ROOTHUB_LOOP] RUNTASK id=53 lpd_main ...
[USB] lpd_init() End.
printer schedule task running
upnp_Init(0) upnpGlobalInit[1]:0
MEI_DRV: Cntrl Thr Enter - VnxCtrl
pCurr->eventWaitQueue=47
pCurr->eventWaitQueue=47
Autoboot State: firmwareReady
##### [IFXOS_ThreadInit] name <autbtex>, tid 56, nStackSize=10000
##### [IFXOS_ThreadInit] name <pmex_ne>, tid 57, nStackSize=10000
##### [IFXOS_ThreadInit] name <pmex_fe>, tid 58, nStackSize=10000
pCurr->eventWaitQueue=47
DSL_CPE: Device initialized succeeded (ret=0).
pCurr->eventWaitQueue=47
Autoboot State: Init
DSL_CPE_Event_S_AutobootStatusHandle called
nReturn=0 nData="67C3 0001 0001 "
StatusData.nStatus=1


>>>>>> usbd_new_device: adding unit bus:1, addr=1, rev=0200, class=9, subclass=0, protocol=1, maxpacket=64,
len=18, speed=3

usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
usbd_open_pipe_intr: ipipe=8667CD40 repeat=0 xfer=A5F037A0
pCurr->eventWaitQueue=47
set dms 67C3 1B 1 2300
nReturn=0 nData="67C3 001B 0001 "
pCurr->eventWaitQueue=47
StatusData.nStatus=2
Autoboot State: Train
modem state = 00000100
[xDSL] vinax_modem_state = 0x0100
usbd_probe_and_attach,probe 1!
[USB] dwc3884_start() Core id:1, funcIdx:6
[USB] dwc3884_start() DWC3884 core version:0x4F54281A, 2.81a, channel:16
[USB] dwc3884_reset(XR9) Reset In, core_id:1
[USB] dwc3884_reset() rstctl:0xBE106010
[USB] dwc3884_start() intsts:0xBE106014, var:0x54000029


>>>>>> usbd_new_device: adding unit bus:2, addr=1, rev=0200, class=9, subclass=0, protocol=1, maxpacket=64, len=18, speed=3

usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
usbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1
usbd_open_pipe_intr: ipipe=8667D4C0 repeat=0 xfer=A5F0B7E0
SSDP Initialization completed...
readXML: fname=/tr64_igd.xml

>> Parse Service 'urn:dslforum-org:service:DeviceInfo:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:DeviceConfig:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:LANEthernetInterfaceConfig:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:WLANConfiguration:1' : TRUE
>> Parse Device 'urn:dslforum-org:device:LANDevice:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:WANDSLInterfaceConfig:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:WANPPPConnection:1' : TRUE
>> Parse Device 'urn:dslforum-org:device:WANConnectionDevice:1' : TRUE
>> Parse Device 'urn:dslforum-org:device:WANDevice:1' : TRUE
>> Parse Device 'urn:dslforum-org:device:InternetGatewayDevice:1' : TRUETR64DBUG::TR64_Init> tr64_pDevRoot->szDescUrl:
"http://19 2.168.1.1/tr64_igd.xml"
TR64DBUG::TR64_InitReqList> Start:
TR64DBUG::TR64_InitReqList> End.
TR64::TR64_Init> RUNTASK id=59 TR64_ProcessRequest...
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
TR64DBUG::TR64_Init> End.
TR64DBUG::TR64_Main> End.
usbd_probe_and_attach,probe 1!
startExplore() usb explore task run-up, slot:0, tsk_id:34, reason:0
usb_hc_install_interrupt() Install OTG-1 interrupt 54
IrqConnect : IRQ = 54, Handler = 0x803A79A4
IrqConnect : IRQ = 60, Handler = 0x803AC304
usb_hc_install_interrupt() Install OTG-2 interrupt 83
IrqConnect : IRQ = 83, Handler = 0x803A79D0
USB Module: Version 2.0.0 build Mar  9 2012 18:05:03
usb_explore_task() Begin ...
GenaInit : event_hook is NULL!!

>> Parse Service 'urn:schemas-microsoft-com:service:OSInfo:1' : TRUE
>> Parse Service 'urn:schemas-upnp-org:service:Layer3Forwarding:1' : TRUE
>> Parse Service 'urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1' : TRUE
>> Parse Service 'urn:schemas-upnp-org:service:WANEthernetLinkConfig:1' : TRUE
>> Parse Service 'urn:schemas-upnp-org:service:WANPPPConnection:1' : TRUE
>> Parse Service 'urn:schemas-upnp-org:service:WANIPConnection:1' : TRUE
>> Parse Device 'urn:schemas-upnp-org:device:WANConnectionDevice:1' : TRUE
>> Parse Device 'urn:schemas-upnp-org:device:WANDevice:1' : TRUE
>> Parse Device 'urn:schemas-upnp-org:device:InternetGatewayDevice:1' : TRUE
********** upnp_main1() Record pDevRoot[1]:829e14dc
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]

>>>> UPNP init IGD device successfully ...

upnp_main(2-0) Run-up UPnP device TR64...
readXML: fname=/tr64_igd.xml
upnp_Init(0) upnpGlobalInit[2]:0

>> Parse Service 'urn:dslforum-org:service:DeviceInfo:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:DeviceConfig:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:LANEthernetInterfaceConfig:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:WLANConfiguration:1' : TRUE
>> Parse Device 'urn:dslforum-org:device:LANDevice:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:WANDSLInterfaceConfig:1' : TRUE
>> Parse Service 'urn:dslforum-org:service:WANPPPConnection:1' : TRUE
>> Parse Device 'urn:dslforum-org:device:WANConnectionDevice:1' : TRUE
>> Parse Device 'urn:dslforum-org:device:WANDevice:1' : TRUE
>> Parse Device 'urn:dslforum-org:device:InternetGatewayDevice:1' : TRUE
********** upnp_main1() Record pDevRoot[2]:829b4c20
TR64DBUG::TR64_UPnPInit> Start:
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [1]
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]

>>>> UPNP init TR64 device successfully ...

upnp_main(3-0) Run-up UPnP device WPS-WCN...
readXML: fname=/wcn.xml
upnp_Init(0) upnpGlobalInit[3]:0

>> Parse Service 'urn:schemas-wifialliance-org:service:WFAWLANConfig:1' : TRUE
>> Parse Device 'urn:schemas-wifialliance-org:device:WFADevice:1' : TRUE
********** upnp_main1() Record pDevRoot[3]:8299f2cc
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]

>>>> UPNP init WPS-WCN device successfully ...

upnp_main(4-0) Run-up UPnP device AV Media Server...
readXML: fname=/avServer.xml
upnp_Init(0) upnpGlobalInit[4]:0

>> Parse Service 'urn:schemas-upnp-org:service:ConnectionManager:1' : TRUE
>> Parse Service 'urn:schemas-upnp-org:service:ContentDirectory:1' : TRUE
>> Parse Service 'urn:microsoft.com:service:X_MS_MediaReceiverRegistrar:1' : TRUE
>> Parse Device 'urn:schemas-upnp-org:device:MediaServer:1' : TRUE
********** upnp_main1() Record pDevRoot[4]:82993cf8
>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
QueryCurrentConnectionIDs....

>>>> UPNP init AV Media Server device successfully ...


********** upnp_main() Unsupportted UPnP root device[5]: AV Media Renderer


********** upnp_main() Unsupportted UPnP root device[6]: Printer

modem state = 00000200
[xDSL] vinax_modem_state = 0x0200
IFXOS_EventWait: -20
ifx_mps_get_fw_version: ifx_mps_mbx_write_message...
ifx_mps_get_fw_version: Before sleep
ifx_mps_get_fw_version: After sleep!
ifx_mps_get_fw_version: ifx_mps_mbx_read_message retval 0 bytes_read 8
ok!
Version 2.1.1.7.0 up and running...
VMMC_TAPI_LL_FW_Start: ifx_mps_ioctl ret 0
IFX_TAPI_Phone_Init: TAPI FW_Start 0
[40] Allocate resource 148, FreeResource = 8
[40] Allocate resource 149, FreeResource = 9
[40] Allocate resource 150, FreeResource = 10
[40] Allocate resource 151, FreeResource = 11
[40] Allocate resource 152, FreeResource = 12
[40] Allocate resource 153, FreeResource = 13
[40] Allocate resource 154, FreeResource = 14
[40] Allocate resource 155, FreeResource = 15
[40] Allocate resource 156, FreeResource = 16
[40] Allocate resource 157, FreeResource = 17
[40] Allocate resource 158, FreeResource = 18
[40] Allocate resource 159, FreeResource = 19
[40] Allocate resource 160, FreeResource = 20
[40] Allocate resource 161, FreeResource = 21
[40] Allocate resource 162, FreeResource = 22
[40] Allocate resource 163, FreeResource = 23
[40] Allocate resource 164, FreeResource = 24
[40] Allocate resource 165, FreeResource = 25
[40] Allocate resource 166, FreeResource = 26
[40] Allocate resource 167, FreeResource = 27
[40] Allocate resource 168, FreeResource = 28
[40] Allocate resource 169, FreeResource = 29
[40] Allocate resource 170, FreeResource = 30
[40] Allocate resource 171, FreeResource = 31
[40] Allocate resource 172, FreeResource = 32
[40] Allocate resource 173, FreeResource = 33
[40] Allocate resource 174, FreeResource = 34
[40] Allocate resource 175, FreeResource = 35
[40] Allocate resource 176, FreeResource = 36
[40] Allocate resource 177, FreeResource = 37
[40] Allocate resource 178, FreeResource = 38
[40] Allocate resource 179, FreeResource = 39
[40] Allocate resource 180, FreeResource = 40
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFXOS_EventWait: -20
VMMC_TAPI_LL_FW_Init: VMMC_ALM_SmartSLIC_ChGet 2 FXO 0 2

FWCAP: nPCM: 8  nALM: 2  nSIG: 5  nCOD: 5  nDECT: 6
FWCAP: nNLEC: 4 nWLEC: 4 nES: 4   nAGC: 5  nFAX: 5
FWCAP: nUTG:16  UTG/CH: 2 nMFTD: 5 nLIN: 2
FWCAP: nDTMFR: 5 nDTMFG: 5 nCIDS: 5 nCIDR: 5
VMMC_AddCaps: CODECS = 4cf
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFXOS_EventWait: -20
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 11
[40] Allocate resource 181, FreeResource = 41
>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 12
[40] Allocate resource 182, FreeResource = 42
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFXOS_EventWait: -20
IFX_TAPI_Phone_Init: TAPI BBD_Dnld 0
===>
Set PCM I/F 0 VMMC_handle:82a2fdb4
IFX_TAPI_Phone_Init: TAPI FW_Start 0
===>
 VMMC_Ioctl: Phone 1 IFX_TAPI_LINE_TYPE ok!
 VMMC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok!
 VMMC_Ioctl: Phone 1 IFX_TAPI_MAP_DATA_ADD ok!
Set PCM I/F 1 VMMC_handle:82a2fd98
IFX_TAPI_Phone_Init: TAPI FW_Start 0
===>
 VMMC_Ioctl: Phone 2 IFX_TAPI_LINE_TYPE ok!
 VMMC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok!
 VMMC_Ioctl: Phone 2 IFX_TAPI_MAP_DATA_ADD ok!
Set PCM I/F 2 VMMC_handle:82a2fd7c
IFX_TAPI_Phone_Init: TAPI FW_Start 0
===>
Set PCM I/F 3 VMMC_handle:82a2fd60
IFX_TAPI_Phone_Init: TAPI FW_Start 0
===>
Set PCM I/F 4 VMMC_handle:82a2fd44
IFX_TAPI_Phone_Init: TAPI FW_Start 0
===>
Set PCM I/F 5 VMMC_handle:82a2fd28
IFX_TAPI_Phone_Init: TAPI FW_Start 0
===>
Set PCM I/F 6 VMMC_handle:82a2fd0c
IFX_TAPI_Phone_Init: TAPI FW_Start 0
===>
Set PCM I/F 7 VMMC_handle:82a2fcf0
IFX_TAPI_Phone_Init: TAPI FW_Start 0
===>
Set PCM I/F 8 VMMC_handle:82a2fcd4
Setting HOOK Related Parameters 0
Setting HOOKFLASH_TIME min 50 ms max 350 ms
Setting HOOKON_TIME min 320 max 320
Setting HOOK Related Parameters 1
Setting HOOKFLASH_TIME min 50 ms max 350 ms
Setting HOOKON_TIME min 320 max 320
Setting HOOK Related Parameters 2
Setting HOOK Related Parameters 3
RUNTASK id=31 VINETIC_DRV_Task...
[33] Allocate mailbox 25
RUNTASK id=33 VINETIC_T38_Task...
RUNTASK id=62 FXO_flash_task...
RUNTASK id=61 VOICE_API_task...
************** Enable ProDaaCheckInterrupt() detect 8465
Reset Duslic High begin
1: R01=ff
2: R01=ff
3: R01=ff
4: R01=ff
5: R01=ff
6: R01=ff
7: R01=ff
8: R01=ff
9: R01=ff
10: R01=ff
11: R01=ff
12: R01=ff
13: R01=ff
14: R01=ff
15: R01=ff
16: R01=ff
17: R01=ff
18: R01=ff
apAppInit called 2????
pci_init 1
ifx_pmu_set: PMU_PWDCR0 = 0x80110092 module 15 regid 0 regbit 15
ifx_pmu_set: Module AHBM has been activated 2 times before
ifx_pmu_set: PMU_PWDCR0 = 0x80110092 module 13 regid 0 regbit 13
ifx_pmu_set: Module AHBS has been activated 2 times before
call pcie_gpio_ep_reset_init ...
pcie_gpio_ep_reset_init : reset pin 21
ifx_pmu_set: PMU_PWDCR1 = 0x0000006f module 32 regid 1 regbit 0
ifx_pmu_set: Actual disabling..........2
ifx_pmu_set: Module PCIE-PHY disactivated!!!
ifx_pmu_set: PMU_PWDCR1 = 0x0000006f module 36 regid 1 regbit 4
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PDI has been activated 1 times before
ifx_pmu_set: PMU_PWDCR1 = 0x0000006e module 32 regid 1 regbit 0
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PCIE-PHY has been activated 1 times before
ifx_pmu_set: PMU_PWDCR1 = 0x0000006c module 33 regid 1 regbit 1
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PCIE-CTRL has been activated 1 times before
ifx_pmu_set: PMU_PWDCR0 = 0x00110092 module 31 regid 0 regbit 31
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module PCIE_L0_CLK has been activated 1 times before
ifx_pmu_set: PMU_PWDCR1 = 0x0000004c module 37 regid 1 regbit 5
ifx_pmu_set: Actual enabling.......... 1
ifx_pmu_set: Module MSI has been activated 1 times before
pciauto_assign_resources : bus 1
pciauto_bus_scan : current_bus 1
pciauto_bus_scan : pci_devfn 0
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
pciauto_bus_scan : pci_devfn 1
pciauto_bus_scan : pci_devfn 2
pciauto_bus_scan : pci_devfn 3
pciauto_bus_scan : pci_devfn 4
pciauto_bus_scan : pci_devfn 5
pciauto_bus_scan : pci_devfn 6
pciauto_bus_scan : pci_devfn 7
pciauto_bus_scan : pci_devfn 8
pciauto_bus_scan : pci_devfn 9
pciauto_bus_scan : pci_devfn a
pciauto_bus_scan : pci_devfn b
pciauto_bus_scan : pci_devfn c
pciauto_bus_scan : pci_devfn d
pciauto_bus_scan : pci_devfn e
pciauto_bus_scan : pci_devfn f
pciauto_bus_scan : pci_devfn 10
pciauto_bus_scan : pci_devfn 11
pciauto_bus_scan : pci_devfn 12
pciauto_bus_scan : pci_devfn 13
pciauto_bus_scan : pci_devfn 14
pciauto_bus_scan : pci_devfn 15
pciauto_bus_scan : pci_devfn 16
pciauto_bus_scan : pci_devfn 17
pciauto_bus_scan : pci_devfn 18
pciauto_bus_scan : pci_devfn 19
pciauto_bus_scan : pci_devfn 1a
pciauto_bus_scan : pci_devfn 1b
pciauto_bus_scan : pci_devfn 1c
pciauto_bus_scan : pci_devfn 1d
pciauto_bus_scan : pci_devfn 1e
pciauto_bus_scan : pci_devfn 1f
pciauto_bus_scan : pci_devfn 20
pciauto_bus_scan : pci_devfn 21
pciauto_bus_scan : pci_devfn 22
pciauto_bus_scan : pci_devfn 23
pciauto_bus_scan : pci_devfn 24
pciauto_bus_scan : pci_devfn 25
pciauto_bus_scan : pci_devfn 26
pciauto_bus_scan : pci_devfn 27
pciauto_bus_scan : pci_devfn 28
pciauto_bus_scan : pci_devfn 29
pciauto_bus_scan : pci_devfn 2a
pciauto_bus_scan : pci_devfn 2b
pciauto_bus_scan : pci_devfn 2c
pciauto_bus_scan : pci_devfn 2d
pciauto_bus_scan : pci_devfn 2e
pciauto_bus_scan : pci_devfn 2f
pciauto_bus_scan : pci_devfn 30
pciauto_bus_scan : pci_devfn 31
pciauto_bus_scan : pci_devfn 32
pciauto_bus_scan : pci_devfn 33
pciauto_bus_scan : pci_devfn 34
pciauto_bus_scan : pci_devfn 35
pciauto_bus_scan : pci_devfn 36
pciauto_bus_scan : pci_devfn 37
pciauto_bus_scan : pci_devfn 38
pciauto_bus_scan : pci_devfn 39
pciauto_bus_scan : pci_devfn 3a
pciauto_bus_scan : pci_devfn 3b
pciauto_bus_scan : pci_devfn 3c
pciauto_bus_scan : pci_devfn 3d
pciauto_bus_scan : pci_devfn 3e
pciauto_bus_scan : pci_devfn 3f
pciauto_bus_scan : pci_devfn 40
pciauto_bus_scan : pci_devfn 41
pciauto_bus_scan : pci_devfn 42
pciauto_bus_scan : pci_devfn 43
pciauto_bus_scan : pci_devfn 44
pciauto_bus_scan : pci_devfn 45
pciauto_bus_scan : pci_devfn 46
pciauto_bus_scan : pci_devfn 47
pciauto_bus_scan : pci_devfn 48
pciauto_bus_scan : pci_devfn 49
pciauto_bus_scan : pci_devfn 4a
pciauto_bus_scan : pci_devfn 4b
pciauto_bus_scan : pci_devfn 4c
pciauto_bus_scan : pci_devfn 4d
pciauto_bus_scan : pci_devfn 4e
pciauto_bus_scan : pci_devfn 4f
pciauto_bus_scan : pci_devfn 50
pciauto_bus_scan : pci_devfn 51
pciauto_bus_scan : pci_devfn 52
pciauto_bus_scan : pci_devfn 53
pciauto_bus_scan : pci_devfn 54
pciauto_bus_scan : pci_devfn 55
pciauto_bus_scan : pci_devfn 56
pciauto_bus_scan : pci_devfn 57
pciauto_bus_scan : pci_devfn 58
pciauto_bus_scan : pci_devfn 59
pciauto_bus_scan : pci_devfn 5a
pciauto_bus_scan : pci_devfn 5b
pciauto_bus_scan : pci_devfn 5c
pciauto_bus_scan : pci_devfn 5d
pciauto_bus_scan : pci_devfn 5e
pciauto_bus_scan : pci_devfn 5f
pciauto_bus_scan : pci_devfn 60
pciauto_bus_scan : pci_devfn 61
pciauto_bus_scan : pci_devfn 62
pciauto_bus_scan : pci_devfn 63
pciauto_bus_scan : pci_devfn 64
pciauto_bus_scan : pci_devfn 65
pciauto_bus_scan : pci_devfn 66
pciauto_bus_scan : pci_devfn 67
pciauto_bus_scan : pci_devfn 68
pciauto_bus_scan : pci_devfn 69
pciauto_bus_scan : pci_devfn 6a
pciauto_bus_scan : pci_devfn 6b
pciauto_bus_scan : pci_devfn 6c
pciauto_bus_scan : pci_devfn 6d
pciauto_bus_scan : pci_devfn 6e
pciauto_bus_scan : pci_devfn 6f
pciauto_bus_scan : pci_devfn 70
pciauto_bus_scan : pci_devfn 71
pciauto_bus_scan : pci_devfn 72
pciauto_bus_scan : pci_devfn 73
pciauto_bus_scan : pci_devfn 74
pciauto_bus_scan : pci_devfn 75
pciauto_bus_scan : pci_devfn 76
pciauto_bus_scan : pci_devfn 77
pciauto_bus_scan : pci_devfn 78
pciauto_bus_scan : pci_devfn 79
pciauto_bus_scan : pci_devfn 7a
pciauto_bus_scan : pci_devfn 7b
pciauto_bus_scan : pci_devfn 7c
pciauto_bus_scan : pci_devfn 7d
pciauto_bus_scan : pci_devfn 7e
pciauto_bus_scan : pci_devfn 7f
pciauto_bus_scan : pci_devfn 80
pciauto_bus_scan : pci_devfn 81
pciauto_bus_scan : pci_devfn 82
pciauto_bus_scan : pci_devfn 83
pciauto_bus_scan : pci_devfn 84
pciauto_bus_scan : pci_devfn 85
pciauto_bus_scan : pci_devfn 86
pciauto_bus_scan : pci_devfn 87
pciauto_bus_scan : pci_devfn 88
pciauto_bus_scan : pci_devfn 89
pciauto_bus_scan : pci_devfn 8a
pciauto_bus_scan : pci_devfn 8b
pciauto_bus_scan : pci_devfn 8c
pciauto_bus_scan : pci_devfn 8d
pciauto_bus_scan : pci_devfn 8e
pciauto_bus_scan : pci_devfn 8f
pciauto_bus_scan : pci_devfn 90
pciauto_bus_scan : pci_devfn 91
pciauto_bus_scan : pci_devfn 92
pciauto_bus_scan : pci_devfn 93
pciauto_bus_scan : pci_devfn 94
pciauto_bus_scan : pci_devfn 95
pciauto_bus_scan : pci_devfn 96
pciauto_bus_scan : pci_devfn 97
pciauto_bus_scan : pci_devfn 98
pciauto_bus_scan : pci_devfn 99
pciauto_bus_scan : pci_devfn 9a
pciauto_bus_scan : pci_devfn 9b
pciauto_bus_scan : pci_devfn 9c
pciauto_bus_scan : pci_devfn 9d
pciauto_bus_scan : pci_devfn 9e
pciauto_bus_scan : pci_devfn 9f
pciauto_bus_scan : pci_devfn a0
pciauto_bus_scan : pci_devfn a1
pciauto_bus_scan : pci_devfn a2
pciauto_bus_scan : pci_devfn a3
pciauto_bus_scan : pci_devfn a4
pciauto_bus_scan : pci_devfn a5
pciauto_bus_scan : pci_devfn a6
pciauto_bus_scan : pci_devfn a7
pciauto_bus_scan : pci_devfn a8
pciauto_bus_scan : pci_devfn a9
pciauto_bus_scan : pci_devfn aa
pciauto_bus_scan : pci_devfn ab
pciauto_bus_scan : pci_devfn ac
pciauto_bus_scan : pci_devfn ad
pciauto_bus_scan : pci_devfn ae
pciauto_bus_scan : pci_devfn af
pciauto_bus_scan : pci_devfn b0
pciauto_bus_scan : pci_devfn b1
pciauto_bus_scan : pci_devfn b2
pciauto_bus_scan : pci_devfn b3
pciauto_bus_scan : pci_devfn b4
pciauto_bus_scan : pci_devfn b5
pciauto_bus_scan : pci_devfn b6
pciauto_bus_scan : pci_devfn b7
pciauto_bus_scan : pci_devfn b8
pciauto_bus_scan : pci_devfn b9
pciauto_bus_scan : pci_devfn ba
pciauto_bus_scan : pci_devfn bb
pciauto_bus_scan : pci_devfn bc
pciauto_bus_scan : pci_devfn bd
pciauto_bus_scan : pci_devfn be
pciauto_bus_scan : pci_devfn bf
pciauto_bus_scan : pci_devfn c0
pciauto_bus_scan : pci_devfn c1
pciauto_bus_scan : pci_devfn c2
pciauto_bus_scan : pci_devfn c3
pciauto_bus_scan : pci_devfn c4
pciauto_bus_scan : pci_devfn c5
pciauto_bus_scan : pci_devfn c6
pciauto_bus_scan : pci_devfn c7
pciauto_bus_scan : pci_devfn c8
pciauto_bus_scan : pci_devfn c9
pciauto_bus_scan : pci_devfn ca
pciauto_bus_scan : pci_devfn cb
pciauto_bus_scan : pci_devfn cc
pciauto_bus_scan : pci_devfn cd
pciauto_bus_scan : pci_devfn ce
pciauto_bus_scan : pci_devfn cf
pciauto_bus_scan : pci_devfn d0
pciauto_bus_scan : pci_devfn d1
pciauto_bus_scan : pci_devfn d2
pciauto_bus_scan : pci_devfn d3
pciauto_bus_scan : pci_devfn d4
pciauto_bus_scan : pci_devfn d5
pciauto_bus_scan : pci_devfn d6
pciauto_bus_scan : pci_devfn d7
pciauto_bus_scan : pci_devfn d8
pciauto_bus_scan : pci_devfn d9
pciauto_bus_scan : pci_devfn da
pciauto_bus_scan : pci_devfn db
pciauto_bus_scan : pci_devfn dc
pciauto_bus_scan : pci_devfn dd
pciauto_bus_scan : pci_devfn de
pciauto_bus_scan : pci_devfn df
pciauto_bus_scan : pci_devfn e0
pciauto_bus_scan : pci_devfn e1
pciauto_bus_scan : pci_devfn e2
pciauto_bus_scan : pci_devfn e3
pciauto_bus_scan : pci_devfn e4
pciauto_bus_scan : pci_devfn e5
pciauto_bus_scan : pci_devfn e6
pciauto_bus_scan : pci_devfn e7
pciauto_bus_scan : pci_devfn e8
pciauto_bus_scan : pci_devfn e9
pciauto_bus_scan : pci_devfn ea
pciauto_bus_scan : pci_devfn eb
pciauto_bus_scan : pci_devfn ec
pciauto_bus_scan : pci_devfn ed
pciauto_bus_scan : pci_devfn ee
pciauto_bus_scan : pci_devfn ef
pciauto_bus_scan : pci_devfn f0
pciauto_bus_scan : pci_devfn f1
pciauto_bus_scan : pci_devfn f2
pciauto_bus_scan : pci_devfn f3
pciauto_bus_scan : pci_devfn f4
pciauto_bus_scan : pci_devfn f5
pciauto_bus_scan : pci_devfn f6
pciauto_bus_scan : pci_devfn f7
pciauto_bus_scan : pci_devfn f8
pciauto_bus_scan : pci_devfn f9
pciauto_bus_scan : pci_devfn fa
pciauto_bus_scan : pci_devfn fb
pciauto_bus_scan : pci_devfn fc
pciauto_bus_scan : pci_devfn fd
pciauto_bus_scan : pci_devfn fe
after pciauto_assign_resources ???
Scanning bus 00
pci_type=1 in pci_scan_slot
pci_type=1
dev->pci_type=1
Found 00:00 [15d1/0011] 000604 01
Early fixups, before probing the BARs !!!
PCI: Calling quirk 80393140 for 00:00.0
ifx_pcie_write_config : bus_number = 0 ????
PCI: Calling quirk 80393160 for 00:00.0
[KERN_INFO]ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
Fixups for bus 00
Scanning behind PCI bridge 00:00.0, config ff0100, pass 0
ifx_pcie_write_config : bus_number = 0 ????
Scanning behind PCI bridge 00:00.0, config ff0100, pass 1
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
Scanning bus 01
pci_type=1 in pci_scan_slot
pci_type=1
dev->pci_type=1
Found 01:00 [1a30/0710] 000d80 00
Early fixups, before probing the BARs !!!
PCI: Calling quirk 80393140 for 01:00.0
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
pci_type=1 in pci_scan_slot
Fixups for bus 01
Bus scan for 01 returning with max=01
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
ifx_pcie_write_config : bus_number = 0 ????
Bus scan for 00 returning with max=01
IrqConnect : IRQ = 97, Handler = 0x80393AB0
[KERN_INFO]IFX PCIe Root Complex driver, version 1.1.4, (c)2009 Infineon Technologies AG
PCI: Calling quirk 80393E30 for 01:00.0
check dev->cfg_size <= 256 ???????
pcie_set_readrq : rq 80
pcie_set_readrq : ctl 1f
msi_set_enable is called ???
arch_setup_msi_irqs(236) is called
set_irq_msi : entry 85da448c irq 155
call set_irq_msi ????
get_irq_msi i 0 irq 155 : entry 85da448c irq 155
get_irq_msi return 85da448c
call get_irq_msi ????
pci_intx_for_msi is called ????
pci_intx_for_msi is called ????
pci_intx: enable 0
msi_set_enable is called ???
pci_init 2
pci_find_slot bus 1 devfn 0
dev->bus->number 0 dev->devfn 0
dev->bus->number 1 dev->devfn 0
PCI_AH_probe: Vendor_id=1A30,Device_id=710
[HWLAN] devtag = 00000000
[HWLAN] Vendor ID 0x1a30
[HWLAN] Device ID 0x710
[HWLAN] Base Addr 0xb8000000
[HWLAN] SVendor ID 0x1a30
[HWLAN] SDevice ID 0x711
[HWLAN] Revision ID 0x1
[HWLAN] interrupt vector 0x1
Find PCI/PCIe interface at info=2 in tag=0
[0]install irq 155
IrqConnect : IRQ = 155, Handler = 0x8012C318
[39] Allocate resource 183, FreeResource = 43
pci_announce_device called
pci_announce_device called
set pci_type to 1
dev=0x81be3a68 in _mtlk_pci_init
dev->pci_type=1
pcibios_set_master> lat=0x0
PCI: Setting latency timer of device 01:00.0 to 64
alloc_etherdev: name = wlan0
alloc_etherdev> dev->priv = 0x8142D774 **********

Get wlan0 dev=82BB8D68
[39] Allocate event 339
[39] Allocate event 340
[39] Allocate event 341
[39] Allocate event 342
[39] Allocate event 343
[39] Allocate event 344
[39] Allocate event 345
[39] Allocate event 346
[39] Allocate event 347
[39] Allocate event 348
[39] Allocate event 349
[39] Allocate event 350
[39] Allocate event 351
[39] Allocate event 352
[39] Allocate event 353
[39] Allocate event 354
[39] Allocate event 355
[39] Allocate event 356
[39] Allocate event 357
[39] Allocate event 358
[39] Allocate event 359
[39] Allocate event 360
[39] Allocate event 361
[39] Allocate event 362
[39] Allocate event 363
[39] Allocate event 364
[39] Allocate event 365
[39] Allocate event 366
[39] Allocate event 367
[39] Allocate event 368
[39] Allocate event 369
[39] Allocate event 370
[39] Allocate event 371
[39] Allocate event 372
[39] Allocate event 373
[39] Allocate event 374
[39] Allocate event 375
[39] Allocate event 376
[39] Allocate event 377
[39] Allocate event 378
[39] Allocate event 379
[39] Allocate event 380
[39] Allocate event 381
[39] Allocate event 382
[39] Allocate event 383
[39] Allocate event 384
[39] Allocate event 385
[39] Allocate event 386
[39] Allocate event 387
[39] Allocate event 388
[39] Allocate event 389
[39] Allocate event 390
[39] Allocate event 391
[39] Allocate event 392
[39] Allocate event 393
[39] Allocate event 394
[39] Allocate event 395
[39] Allocate event 396
[39] Allocate event 397
[39] Allocate event 398
[39] Allocate event 399
[39] Allocate event 400
[39] Allocate event 401
[39] Allocate event 402
[39] Allocate event 403
[39] Allocate event 404
[39] Allocate event 405
[39] Allocate event 406
[39] Allocate resource 184, FreeResource = 44
[39] Allocate event 407
[39] Allocate event 408
[39] Allocate event 409
[39] Allocate resource 185, FreeResource = 45
[39] Allocate event 410
[39] Allocate event 411
[39] Allocate event 412
ap_upper.bin: @@@ VERSION INFO @@@ version number: FW_3.1.0_Customers_r5058 MIPS:
Upper CPU(TMC AGG AP) interface: PCI  phy type:  real phy on Jan 22 2012 at 16:48:21@@@ END @@@
contr_lm.bin: @@@ VERSION INFO @@@ version number: FW_3.1.0_Customers_r5058 MIPS:
Lower MAC  interface: --  phy type: real phy on  Jan 22 2012 at 16:47:59@@@ END @@@
mtlk_core_start : nic 8142d774 , hw 8142dd44
19: R01=ff
Reset Duslic end
ProDAAInitialize: begin now
ProDAAInitialize: Line-Side Device Status ff
Port 2 sytem-side revision ff, line-side revision f
init_DTMF_data: time 16399
force_daa_offhook ch 2 onoff 1 time 16399
ProDaaOffhook ff 2 onoff 1
CID_Detect CH 2 onoff 0
FXO_PolState_DTMFCID --> Disable DTMF CID
force_daa_offhook ch 2 onoff 0 time 16458
ProDaaOffhook ff 2 onoff 0
CID_Detect CH 2 onoff 1
failed
FXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CID
FXS_FXO is talking now...
Relay On now ch:0
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 3 chID 4
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 4 chID 5
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 5 chID 6
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 6 chID 7
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 7 chID 0
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 8 chID 0
When * the value is 60000
When * the value is 60000
When * the value is 60000
When * the value is 60000
sys_voip_cfg->cpt.reorder = 425@-230;20(0.24/0.24/1)
TEL_DRV_TONE_REORDER  duration = 480
[40] Allocate resource 186, FreeResource = 46
[40] Allocate mailbox 26
TEL_MGR_Init
[40] Allocate resource 187, FreeResource = 47
tel_mgr_mutex=187
[40] Allocate mailbox 27
 TEL_DM_Init
[40] Allocate resource 188, FreeResource = 48
[40] Allocate resource 189, FreeResource = 49
 TEL_MGR_VoiceChannelInit
 TEL_MGR_SetVoiceChannel 1
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0
 TEL_MGR_SetPhoneEC
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0
VMMC_TAPI_LL_ALM_LEC_Set Ch 0 pLecConf->nOpMode 2 pLecConf->bNlp 1
 TEL_MGR_SetPhoneVAD
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0
VMMC_TAPI_LL_COD_VAD_Cfg CH 0 nVAD 0
 TEL_MGR_SetPhoneGain
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0
Gain Tx -2, Rx -9
IFX_TAPI_LL_ALM_Volume_Set Ch 0 TxGain -2 RxGain -9
 TEL_MGR_SetPhoneJitter
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0
 TEL_MGR_SetVoiceChannel 2
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1
 TEL_MGR_SetPhoneEC
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1
VMMC_TAPI_LL_ALM_LEC_Set Ch 1 pLecConf->nOpMode 2 pLecConf->bNlp 1
 TEL_MGR_SetPhoneVAD
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1
VMMC_TAPI_LL_COD_VAD_Cfg CH 1 nVAD 0
 TEL_MGR_SetPhoneGain
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1
Gain Tx -2, Rx -9
IFX_TAPI_LL_ALM_Volume_Set Ch 1 TxGain -2 RxGain -9
 TEL_MGR_SetPhoneJitter
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1
 TEL_MGR_SetVoiceChannel 5
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 5 chID 6
 TEL_MGR_SetPhoneEC
##@@!! TEL_MGR_SetPhoneEC: USB_DECT_Phone need to change here
 TEL_MGR_SetPhoneVAD
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 5 chID 6
##@@!! VOICE_DRV_SetVAD: channelId 6 >= USB_DECT_CHANNEL_START 5
 TEL_MGR_SetPhoneGain
##@@!! TEL_MGR_SetPhoneGain: USB_DECT_Phone need to change here
 TEL_MGR_SetPhoneJitter
##@@!! TEL_MGR_SetPhoneJitter: USB_DECT_Phone need to change here
 TEL_MGR_SetVoiceChannel 6
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 6 chID 7
 TEL_MGR_SetPhoneEC
##@@!! TEL_MGR_SetPhoneEC: USB_DECT_Phone need to change here
 TEL_MGR_SetPhoneVAD
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 6 chID 7
##@@!! VOICE_DRV_SetVAD: channelId 7 >= USB_DECT_CHANNEL_START 5
 TEL_MGR_SetPhoneGain
##@@!! TEL_MGR_SetPhoneGain: USB_DECT_Phone need to change here
 TEL_MGR_SetPhoneJitter
##@@!! TEL_MGR_SetPhoneJitter: USB_DECT_Phone need to change here
 TEL_MGR_SetVoiceChannel 7
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 7 chID 0
 TEL_MGR_SetPhoneEC
##@@!! TEL_MGR_SetPhoneEC: USB_DECT_Phone need to change here
 TEL_MGR_SetPhoneVAD
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 7 chID 0
VMMC_TAPI_LL_COD_VAD_Cfg CH 0 nVAD 0
 TEL_MGR_SetPhoneGain
##@@!! TEL_MGR_SetPhoneGain: USB_DECT_Phone need to change here
 TEL_MGR_SetPhoneJitter
##@@!! TEL_MGR_SetPhoneJitter: USB_DECT_Phone need to change here
 TEL_MGR_SetVoiceChannel 8
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 8 chID 0
 TEL_MGR_SetPhoneEC
##@@!! TEL_MGR_SetPhoneEC: USB_DECT_Phone need to change here
 TEL_MGR_SetPhoneVAD
>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 8 chID 0
VMMC_TAPI_LL_COD_VAD_Cfg CH 0 nVAD 0
 TEL_MGR_SetPhoneGain
##@@!! TEL_MGR_SetPhoneGain: USB_DECT_Phone need to change here
 TEL_MGR_SetPhoneJitter
##@@!! TEL_MGR_SetPhoneJitter: USB_DECT_Phone need to change here
[40] Allocate resource 190, FreeResource = 50
[40] Allocate mailbox 28
[65] Allocate resource 191, FreeResource = 51
[65] Allocate resource 192, FreeResource = 52
[SIP_CORE_Task] sip_core_ready
TEL_MGR_SetVoipPhoneEvtHookFunc
TEL_MGR_SetVoipPhoneEvtHookFunc
TEL_MGR_SetVoipPhoneEvtHookFunc
TEL_MGR_SetVoipPhoneEvtHookFunc
TEL_MGR_SetVoipPhoneEvtHookFunc
TEL_MGR_SetVoipPhoneEvtHookFunc
TEL_MGR_SetVoipPhoneEvtHookFunc
TEL_MGR_SetVoipPhoneEvtHookFunc
[40] Allocate resource 193, FreeResource = 53
[40] Allocate mailbox 29
VOICE_IVR_Init: voice_ivr_channel[0].ivrQueueId = 29
[40] Allocate mailbox 30
VOICE_IVR_Init: voice_ivr_channel[1].ivrQueueId = 30
[40] Allocate mailbox 31
VOICE_IVR_Init: voice_ivr_channel[2].ivrQueueId = 31
[40] Allocate mailbox 32
VOICE_IVR_Init: voice_ivr_channel[3].ivrQueueId = 32
[40] Allocate mailbox 33
VOICE_IVR_Init: voice_ivr_channel[4].ivrQueueId = 33
[40] Allocate mailbox 34
VOICE_IVR_Init: voice_ivr_channel[5].ivrQueueId = 34
[40] Allocate mailbox 35
VOICE_IVR_Init: voice_ivr_channel[6].ivrQueueId = 35
[40] Allocate mailbox 36
VOICE_IVR_Init: voice_ivr_channel[7].ivrQueueId = 36
TEL_MGR_DisableDebug
TEL_IVR_CheckMICabort() Start !!
[39] Allocate event 413
[39] Allocate event 414
[39] Allocate event 415
[39] Allocate resource 194, FreeResource = 54
[39] Allocate event 416
create mtlk kernel thread 8142d748
running  mtlk kernel thread 8142d748
RUNTASK id=40(osdep 8142d748) Metalink kernel thread ...
FXO_PCM_onoff 1
init_FXO_CH: IFX_TAPI_PCM_ACTIVATION_SET 0 error!
VMMC_TAPI_LL_PCM_Volume_Set Ch 2 TxGain -10 RxGain -2
[reset_802dot1x] wireless module ready
init_wpa
111111111=>configp->enableSSN =1
wpa2flag=6
wpa2flag=2
111111111=>configp->enableSSN =3
ie_set==>
ie_set!
enableSSN=3,SSNPSK=1
WPA ie built!!!!!
blob_set_attachment
i_set over
gtk_setkeys
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
[reset_802dot1x] 802.1Xv2 ready
[htf_dbg]     - OnlineActiveWirless() 630
mtlk dev_close ====>>>
[eric_dbg]     - Set1Xconfig() 114
nRadio =0
[eric_dbg]     -Set1Xconfig to set WPA2/WPA,but no need in wave300
===============OnlineActiveWirless to set RSN ie==============
===============OnlineActiveWirless to set RSN ie over==============
mtlk dev_open ====>>>
=================RSN check!!!==============================
=================RSN check over!!!==============================
ifno2dot1x_if[2]=0
ifno2dot1x_if[23]=81
dot1x_wireless_if_mask=0x800004
[reset_802dot1x] wireless module ready
init_wpa
111111111=>configp->enableSSN =1
wpa2flag=6
wpa2flag=2
111111111=>configp->enableSSN =3
ie_set==>
ie_set!
enableSSN=3,SSNPSK=1
WPA ie built!!!!!
blob_set_attachment
i_set over
gtk_setkeys
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
111111111=>configp->enableSSN =0
[reset_802dot1x] 802.1Xv2 ready
[onlineActive_mgmt_access]715 op:0*********************************************
****Wi-Fi Simple Config Application*****
Version: Build 2.02.2.DTM1.1, Mar  9 2012 18:06:07
*********************************************
@#*@#*@#*EAP-WSC: Entered eap_wsc_init *#@*#@*#@
wsc_Send_UPNP_packet> enter
wsc_Send_eap_packet:udpFdupnp_wcn:2b;;udpFdupnp:2d
Entered udp_read
*******wlan_update_appie start***********
================wlan_confree_set_ie()==================
================wlan_confree_set_ie==================
Config Method:0x84
*********************************************
***Waiting for Registrar to connect...***
*********************************************


[/spoiler]
« Última modificación: 13-09-2013, 00:01 (Viernes) por Hwagm »

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4607
Re: Astoria networks ARV7519
« Respuesta #1 en: 25-10-2012, 13:34 (Jueves) »
Te he editado el mensaje, ya que descuadraba completamente el foro  ^-^

Pteridium

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #2 en: 25-10-2012, 15:39 (Jueves) »
Sobre este router al algo de información bailando por ahí...
https://foro.seguridadwireless.net/openwrt/openwrt-para-roters-astoria-de-ya-com/msg251603/#msg251603
https://forum.openwrt.org/viewtopic.php?id=39074
http://wiki.openwrt.org/doc/hardware/soc/soc.lantiq
De momento parece que hay un router con este SoC soportado, pero es bastante diferente tanto a nivel de harware como de software (el FRITZ!Box corre linux y el Livebox 2.1 va con VxWorks), y lo más seguro es que la wifi nunca funcione (es la primera vez que veo el XWAVE 300).
http://wiki.openwrt.org/toh/avm/fritz.box.wlan.3370

Va a tocar esperar, y seguro que muchos también se van a desesperar con el firm de este router, como ya está pasando con los de yacom. No me extrañaría que mucha gente pida que le vuelvan a poner el livebox 2.  ^-^

on-off

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #3 en: 25-10-2012, 17:44 (Jueves) »
No sé si te entendí bien. Entiendo que este router que es un Livebox nuevo de Orange tiene S.O. VxWorks ?.

Otra pregunta, si cambio este router con al antiguo ARV7518, debería funcionar ?, o la operadora tiene que cambiar algún parámetro en sus servidores.

Pteridium

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #4 en: 27-10-2012, 12:52 (Sábado) »
No sé si te entendí bien. Entiendo que este router que es un Livebox nuevo de Orange tiene S.O. VxWorks ?.

Otra pregunta, si cambio este router con al antiguo ARV7518, debería funcionar ?, o la operadora tiene que cambiar algún parámetro en sus servidores.
Pues si no es vxWorks se le parece. Un par de bootlogs de otros routers:
https://forum.openwrt.org/viewtopic.php?pid=151086#p151086
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=432238#432238
También puede ser cualquier otro RTOS o un desarrollo de Arcadyan o Astoria Networks.

Respecto a usar los de yacom es cuestión de probar...

A ver si alguien le regala a blogic un par de ARV7519RW22 para que pueda portarlos a OpenWRT.  ^-^

cotarelo

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #5 en: 17-11-2012, 23:02 (Sábado) »
Aun no hay nada para este cacharro?

Lesgar

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #6 en: 09-12-2012, 19:57 (Domingo) »
Yo tengo dos routers, podría donar uno para la causa.

Pteridium

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #7 en: 10-12-2012, 10:12 (Lunes) »
Yo tengo dos routers, podría donar uno para la causa.

El que se encarga de la plataforma Lantiq es blogic blogic@openwrt.org.
Su nombre es John Crispin.

Quizá tendrías que preguntarle si se va a poder poner a funcionar la wifi, ya que el XWAVE 300, hasta donde sé, no tiene drivers para linux.

Lesgar

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #8 en: 11-12-2012, 00:38 (Martes) »
Ya le he mandado un mensaje, estoy a la espera de su respuesta. Por cierto alguien cerca de Alicante podría dejarme o venderme un adaptador serie a ttl o usb a ttl? También tengo dos livebox 2.0(sagem f@ast 3xxx) para donar si alguien quiere portarlos a openwrt. Perdón por el offtopic.
« Última modificación: 11-12-2012, 00:40 (Martes) por Lesgar »

Lesgar

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #9 en: 15-12-2012, 19:53 (Sábado) »
Me parece un gran trabajo el que os estais pegando portando openwrt a diversos routers  (Ya tengo un hg556a funcionando con openwrt y funciona de lujo y cuando funcione la wifi en el ar-5387un también le cambiaré el firmware) así que voy a contribuir mandándole un ARV7519RW22 a John crispin para que intente portar openwrt a este router, ya he hablado con el y esta deseando que se lo envie.
Lo que me preocupa es que el router que le voy a mandar tiene mis claves para voz ip de mi línea y no se como borrarlas, así que me gustaría que alguien me dijera como formatearlo para mandarlo limpio. No es que desconfie de el ni nada de eso, es que soy novato y no se como funciona esto. No me gustaría que me llegara un facturón de ADSL. Espero no ofender a nadie.

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4607
Re: Astoria networks ARV7519
« Respuesta #10 en: 15-12-2012, 21:28 (Sábado) »
Ni idea de como puedes borrar esos datos. Pero coméntaselo a el. Dile que te preocupa el tema y listos.

Enviado desde mi Cube U30GT (ROM: Infected v.3.0) usando Tapatalk 2

krasny

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #11 en: 21-12-2012, 04:38 (Viernes) »
Hola!!

Desde la interfaz web del router no puedes borrar los datos? De todos modos yo no me preocuparia mucho por que alguien asi fuera a hacer nada con tus datos, ni que fuesen de mucha utilidad desde fuera de la red española.


Un saludo

Pteridium

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #12 en: 13-01-2013, 18:56 (Domingo) »
Hace un par de días blogic me dijo que necesitaba uno de estos para portar a OpenWRT. Por desgracia yo ando un poco corto de dinero, pero me ofreció la posibilidad de correr con los portes, cosa que le honra, pero no me gusta, ya que la idea es que nosotros, que nos beneficiamos del trabajo de los desarrolladores, donemos hardware y dinero para poder soportar este gran proyecto.
Lesgar se ofreció a donarlo, pero igual blogic se ha olvidado del correo que le mandó, con lo que quizá, el que se anime, primero debiera hablar con él.

Además a blogic le llamó la atención que la wifi vaya con el Lantiq XWAVE 300 y le tiene algo de ganas (trabajó en Lantiq).

Para terminar, decir que este aparatito, basado en el Lantiq XWAY VRX288, ya sólo por el hecho de tener posibilidad de multithreading y aceleración criptográfica por hardware, se come con patatas al Infineon/Lantiq XWAY Danube.

http://www.lantiq.com/uploads/tx_abzlantiqproducts/PB-e-0029-v1_lres_01.pdf
http://www.lantiq.com/uploads/tx_abzlantiqproducts/PB-e-0028-v1_lres.pdf
http://www.wikidevi.com/wiki/Orange_Livebox_2.1

Lesgar

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #13 en: 27-01-2013, 19:09 (Domingo) »
De momento no hay novedades con blogic, parece ser que anda muy ocupado. Asi que me he liado la manta a la cabeza y he soldado los pines para el puerto serie (sorprendentemente me ha salido bien).
Ahora viene el primer problema el bootloader viene con password así que no hay nada que hacer.
Viendo que su hermano pequeño el arv4518 de puede poner en modo uart y cargar un bootloader (formato.asc) me pregunto si alguien sabe como poner este router en modo uart y como compilar un uboot.asc compatible para poder hacer un backup completo de la flash. 

barriteleves

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #14 en: 13-04-2013, 17:02 (Sábado) »
 saludos compañero , osbservo que estays buscando informacion de este router que parece tener buena pinta, ademas y creo que puedan tener relacion he realizado una busqueda en san google con esta frase (
 ROM VER: 1
ROM VER: 1.0.5
CFG 01 ) y he encontrado algunos modelos que pueden ser clones de este mismo de los cuales podeis extrar  informacion para entrar  y mirar el firmare y sus partes no he leido todo pues esta un otro idioma pero traslator lo traduce bien un modelo que ya esta desbloqueado:

Cómo desbloquear el módem VDSL2 ECI

no se si puedo o no por las normas poner algun enlace, por lo que si buscais asi encontrareis varios de ellos haber si alguno coninciden o se parecen  si podeis  hacer unas fotos de la placa base se pueden comparar con estos suerte

doblecero

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #15 en: 25-08-2013, 13:57 (Domingo) »
Alguna novedad de blogic con este router?

Pteridium

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #16 en: 25-08-2013, 16:19 (Domingo) »
Alguna novedad de blogic con este router?
Cuando alguien le mande uno seguro que sí.  ;D

doblecero

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #17 en: 25-08-2013, 20:56 (Domingo) »
Ooops, pensaba que alguien lo había hecho ya. :(

Yo solo tengo uno, puedo intentar comprar otro (baratillo) y enviarselo.

Saludos.

krasny

  • Visitante
Re: Astoria networks ARV7519
« Respuesta #18 en: 29-08-2013, 02:58 (Jueves) »
Que os parece?

20€ puesto en casa

http://cgi.ebay.es/ws/eBayISAPI.dll?ViewItem&item=121166577660

Yo acabo de pillar uno, si ahorro un poco le compro uno a blogic, pero no prometo ná, que el verano esta siendo muy malo

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4607
Re: Astoria networks ARV7519
« Respuesta #19 en: 29-08-2013, 08:22 (Jueves) »
Que os parece?

20€ puesto en casa

http://cgi.ebay.es/ws/eBayISAPI.dll?ViewItem&item=121166577660

Yo acabo de pillar uno, si ahorro un poco le compro uno a blogic, pero no prometo ná, que el verano esta siendo muy malo

Me parece caro.

Lo he visto más barato (no se si aún estará ahora mismo) en paginas como http://www.segundamano.es y http://www.milanuncios.com