config switch
option name 'eth0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'eth0'
option vlan '1'
option ports '0 5t'
config switch_vlan
option device 'eth0'
option vlan '2'
option ports '1 5t'
config switch_vlan
option device 'eth0'
option vlan '3'
option ports '2 5t'
config switch_vlan
option device 'eth0'
option vlan '4'
option ports '3 5t'
config interface 'lan'
option ifname 'eth0.1'
option force_link '1'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ipaddr '192.168.30.1'
config interface 'wan'
option proto 'dhcp'
option ifname 'eth0.2'
option metric '10'
config interface 'wan2'
option proto 'dhcp'
option ifname 'eth0.3'
option metric '20'
config interface 'wan3'
option proto 'dhcp'
option ifname 'eth0.4'
option metric '30'
option _orig_ifname 'eth0.x'
option _orig_bridge 'false'
uci set firewall.@zone[0].conntrack=1
uci set firewall.@zone[1].conntrack=1
uci commit
config defaults
option syn_flood '1'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'REJECT'
config zone
option name 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
option network 'lan'
option conntrack '1'
config zone
option name 'wan'
option input 'REJECT'
option output 'ACCEPT'
option forward 'REJECT'
option masq '1'
option mtu_fix '1'
option network 'wan wan6 wan2 wan3'
option conntrack '1'
config forwarding
option src 'lan'
option dest 'wan'
ping -c 1 -I eth0.2 www.google.com
ping -c 1 -I eth0.3 www.google.com
ping -c 1 -I eth0.4 www.google.com
ping -c 1 -I wwan www.google.com
root@OpenWrt:/etc/config# ping -c 1 -I eth0.2 www.google.com
PING www.google.com (173.194.41.242): 56 data bytes
64 bytes from 173.194.41.242: seq=0 ttl=54 time=57.888 ms
--- www.google.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 57.888/57.888/57.888 ms
cd /tmp
wget http://213.136.13.52/mwan3_1.5-4_all.ipk
wget http://213.136.13.52/luci-app-mwan3_1.3-1_all.ipk
opkg update
opkg install mwan3_*.ipk
opkg install luci-app-mwan3_*.ipk
# Interfaz
config interface 'wan'
option enabled '1'
list track_ip '8.8.4.4'
list track_ip '8.8.8.8'
option reliability '1'
option count '1'
option timeout '3'
option interval '5'
option down '5'
option up '5'
config interface 'wan2'
option enabled '1'
list track_ip '8.8.4.4'
list track_ip '8.8.8.8'
option reliability '1'
option count '1'
option timeout '3'
option interval '5'
option down '5'
option up '5'
config interface 'wan3'
option enabled '1'
list track_ip '8.8.4.4'
list track_ip '8.8.8.8'
option reliability '1'
option count '1'
option timeout '3'
option interval '5'
option down '5'
option up '5'
# Miembros
config member 'wan_m1_w3'
option interface 'wan'
option metric '1'
option weight '3'
config member 'wan_m2_w3'
option interface 'wan'
option metric '2'
option weight '3'
config member 'wan_m3_w3'
option interface 'wan'
option metric '3'
option weight '3'
config member 'wan2_m1_w3'
option interface 'wan2'
option metric '1'
option weight '3'
config member 'wan2_m2_w3'
option interface 'wan2'
option metric '2'
option weight '3'
config member 'wan2_m3_w3'
option interface 'wan2'
option metric '3'
option weight '3'
config member 'wan3_m1_w3'
option interface 'wan3'
option metric '1'
option weight '3'
config member 'wan3_m2_w3'
option interface 'wan3'
option metric '2'
option weight '3'
config member 'wan3_m3_w3'
option interface 'wan3'
option metric '3'
option weight '3'
# Políticas
config policy 'conmutador'
list use_member 'wan_m1_w3'
list use_member 'wan2_m2_w3'
list use_member 'wan3_m3_w3'
config policy 'balance'
list use_member 'wan_m1_w3'
list use_member 'wan2_m1_w3'
list use_member 'wan3_m1_w3'
config policy 'wan_only'
list use_member 'wan_m1_w3'
config policy 'wan2_only'
list use_member 'wan2_m1_w3'
config policy 'wan3_only'
list use_member 'wan3_m1_w3'
# Reglas
config rule 'voip'
option dest_port '1024:65535'
option proto 'udp'
option dest_ip '77.72.169.0/24'
option use_policy 'conmutador'
config rule 'default_rule'
option dest_ip '0.0.0.0/0'
option use_policy 'balance'
/etc/config/system
config led 'led_lan'
option name 'LAN'
option sysfs 'HW556:red:dsl'
option trigger 'netdev'
option mode 'link tx rx'
option default '0'
option dev 'eth0'
config led 'led_usb'
option name 'USB'
option sysfs 'HW556:red:hspa'
option trigger 'usbdev'
option dev '1-2'
option interval '50'
option default '0'
config led
option default '0'
option sysfs 'HW556:red:lan4'
option trigger 'netdev'
option dev 'eth0.4'
option name 'wan3-t'
option mode 'tx'
config led
option default '0'
option name 'wan3-r'
option sysfs 'HW556:green:lan4'
option trigger 'netdev'
option dev 'eth0.4'
option mode 'rx'
config led
option default '0'
option name 'wan2-t'
option sysfs 'HW556:red:lan3'
option trigger 'netdev'
option dev 'eth0.3'
option mode 'tx'
config led
option default '0'
option name 'wan2-r'
option sysfs 'HW556:green:lan3'
option trigger 'netdev'
option dev 'eth0.3'
option mode 'rx'
config led
option default '0'
option name 'wan-t'
option sysfs 'HW556:red:lan2'
option trigger 'netdev'
option dev 'eth0.2'
option mode 'tx'
config led
option default '0'
option name 'wan-r'
option sysfs 'HW556:green:lan2'
option trigger 'netdev'
option dev 'eth0.2'
option mode 'rx'
config led
option default '0'
option name 'lan-t'
option sysfs 'HW556:red:lan1'
option trigger 'netdev'
option dev 'eth0.1'
option mode 'tx'
config led
option default '0'
option name 'lan-r'
option sysfs 'HW556:green:lan1'
option trigger 'netdev'
option dev 'eth0.1'
option mode 'rx'
config interface 'lan'
option ifname 'eth0.1'
option force_link '1'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
option dns '8.8.8.8 8.8.4.4'
config interface 'wan'
option proto 'dhcp'
option ifname 'eth0.2'
option metric '10'
... es posible que en las puertas de entrada de cada wan no tengan configuradas sus dns, me refiero al dispositivo individual que te da Internet por cada wan. Por otro lado, observo que utilizas una subred muy común, seguro qué no se repite en alguna wan?
2. Los cables WAN se pueden intercambiar. Si se intercambian después de arrancar el router hay que resetear las interfaces WAN para que tomen las nuevas direcciones IP.
Saludos.
config interface 'wan2'
option enabled '1'
list track_ip '8.8.4.4'
list track_ip '8.8.8.8'
option reliability '1'
option count '1'
option timeout '3'
option interval '5'
option down '5'
option up '5'
config wifi-device 'radio0'
option type 'mac80211'
option hwmode '11g'
option path 'pci0000:00/0000:00:01.0/ssb0:0'
option txpower '20'
option country '00'
option disabled '0'
option channel 'auto'
config wifi-device 'radio1'
option type 'mac80211'
option hwmode '11g'
option path 'platform/ohci-platform/usb2/2-1/2-1:1.0'
option htmode 'HT20'
option disabled '0'
option txpower '20'
option country '00'
option channel 'auto'
config wifi-iface
option network 'wwan1'
option ssid 'miSSID'
option encryption 'psk2'
option device 'radio0'
option mode 'sta'
option bssid 'xx:xx:xx:xx:xx:xx'
option key 'miClaveSecreta'
config wifi-iface
option network 'wwan2'
option ssid 'miSSID'
option encryption 'psk2'
option device 'radio1'
option mode 'sta'
option bssid 'xx:xx:xx:xx:xx:xx'
option key 'miClaveSecreta'
config interface 'wwan1'
option proto 'dhcp'
config interface 'wwan2'
option proto 'dhcp'
root@OpenWrt:~# ping -c 1 -I wlan0 www.google.com
PING www.google.com (74.125.230.50): 56 data bytes
64 bytes from 74.125.230.50: seq=0 ttl=54 time=42.425 ms
--- www.google.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 42.425/42.425/42.425 ms
root@OpenWrt:~# ping -c 1 -I wlan1 www.google.com
PING www.google.com (74.125.230.49): 56 data bytes
64 bytes from 74.125.230.49: seq=0 ttl=55 time=64.105 ms
--- www.google.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 64.105/64.105/64.105 ms
root@OpenWrt:~# ping -c 1 -I wlan0 www.google.com
PING www.google.com (74.125.230.51): 56 data bytes
--- www.google.com ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
Troubleshooting Data
Software versions :
OpenWrt - OpenWrt Barrier Breaker r39304
LuCI - svn-r9948
mwan3 - 1.5-4
luci-app-mwan3 - 1.3-1
Output of "cat /etc/config/mwan3" :
config rule 'default_rule'
option dest_ip '0.0.0.0/0'
option use_policy 'balanced'
config rule 'sticky_odd'
option src_ip '0.0.0.1/0.0.0.1'
option dest_port '443'
option proto 'tcp'
option use_policy 'wan2_wan'
config rule 'sticky_even'
option src_ip '0.0.0.0/0.0.0.1'
option dest_port '443'
option proto 'tcp'
option use_policy 'wan_wan2'
config interface 'wan2'
list track_ip '8.8.8.8'
list track_ip '208.67.220.220'
option reliability '1'
option count '1'
option timeout '2'
option interval '5'
option down '3'
option up '8'
option enabled '1'
config interface 'wan'
option enabled '1'
list track_ip '8.8.4.4'
list track_ip '8.8.8.8'
list track_ip '208.67.222.222'
list track_ip '208.67.220.220'
option reliability '2'
option count '1'
option timeout '2'
option interval '5'
option down '3'
option up '8'
config policy 'balanced'
list use_member 'wan_m1_w3'
list use_member 'wan2_m1_w2'
config policy 'wan_only'
list use_member 'wan_m1_w3'
config policy 'wan2_only'
list use_member 'wan2_m1_w2'
config policy 'wan_wan2'
list use_member 'wan_m1_w3'
list use_member 'wan2_m2_w2'
config policy 'wan2_wan'
list use_member 'wan_m2_w3'
list use_member 'wan2_m1_w2'
config member 'wan_m1_w3'
option interface 'wan'
option metric '1'
option weight '3'
config member 'wan_m2_w3'
option interface 'wan'
option metric '2'
option weight '3'
config member 'wan2_m1_w2'
option interface 'wan2'
option metric '1'
option weight '2'
config member 'wan2_m2_w2'
option interface 'wan2'
option metric '2'
option weight '2'
Output of "cat /etc/config/network" :
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd6d:6c23:40b9::/48'
config interface 'lan'
option ifname 'eth0.1'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ipaddr '192.168.2.1'
config switch
option name 'eth0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'eth0'
option vlan '1'
option ports '1 2 3 4 5t'
config switch_vlan
option device 'eth0'
option vlan '2'
option ports '0 5t'
config interface 'wan'
option proto 'dhcp'
option metric '20'
config interface 'wan2'
option proto 'dhcp'
option ifname 'eth0.2'
option metric '10'
Output of "ifconfig" :
br-lan Link encap:Ethernet HWaddr 64:16:F0:57:27:07
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::6616:f0ff:fe57:2707/64 Scope:Link
inet6 addr: fd6d:6c23:40b9::1/60 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7793 errors:0 dropped:0 overruns:0 frame:0
TX packets:11093 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1394753 (1.3 MiB) TX bytes:10935560 (10.4 MiB)
eth0 Link encap:Ethernet HWaddr 64:16:F0:57:27:07
inet6 addr: fe80::6616:f0ff:fe57:2707/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8581 errors:0 dropped:0 overruns:0 frame:0
TX packets:11547 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1647878 (1.5 MiB) TX bytes:11049007 (10.5 MiB)
Interrupt:14
eth0.1 Link encap:Ethernet HWaddr 64:16:F0:57:27:07
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7793 errors:0 dropped:0 overruns:0 frame:0
TX packets:11093 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1394753 (1.3 MiB) TX bytes:10935560 (10.4 MiB)
eth0.2 Link encap:Ethernet HWaddr 64:16:F0:57:27:07
inet addr:192.168.0.209 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::6616:f0ff:fe57:2707/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:750 errors:0 dropped:0 overruns:0 frame:0
TX packets:447 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:89386 (87.2 KiB) TX bytes:66481 (64.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:368 (368.0 B) TX bytes:368 (368.0 B)
wlan0 Link encap:Ethernet HWaddr 64:16:F0:57:27:08
inet addr:192.168.1.84 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::6616:f0ff:fe57:2708/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8302 errors:0 dropped:0 overruns:0 frame:0
TX packets:5292 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9915869 (9.4 MiB) TX bytes:1169131 (1.1 MiB)
wlan0-1 Link encap:Ethernet HWaddr 66:16:F0:57:27:08
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:155 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:43020 (42.0 KiB)
Output of "route -n" :
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 10 0 0 eth0.2
0.0.0.0 192.168.1.1 0.0.0.0 UG 20 0 0 wlan0
192.168.0.0 0.0.0.0 255.255.255.0 U 10 0 0 eth0.2
192.168.1.0 0.0.0.0 255.255.255.0 U 20 0 0 wlan0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan
Output of "ip rule show" :
0: from all lookup local
1001: from all iif eth0.2 lookup main
1002: from all iif wlan0 lookup main
2001: from all fwmark 0x100/0xff00 lookup 1
2002: from all fwmark 0x200/0xff00 lookup 2
2254: from all fwmark 0xfe00/0xff00 unreachable
32766: from all lookup main
32767: from all lookup default
80000: from 192.168.2.1 nop
80000: from 127.0.0.1 nop
80000: from 192.168.0.209 nop
80000: from 192.168.1.84 nop
90000: from 192.168.2.1/24 nop
90000: from 127.0.0.1/8 nop
90000: from 192.168.0.209/24 nop
90000: from 192.168.1.84/24 nop
Output of "ip route list table 1-250" :
1
default via 192.168.0.1 dev eth0.2
2
default via 192.168.1.1 dev wlan0
Firewall default output policy (must be ACCEPT) :
ACCEPT
Output of "iptables -L -t mangle -v -n" :
Chain PREROUTING (policy ACCEPT 561 packets, 73201 bytes)
pkts bytes target prot opt in out source destination
8321 5693K mwan3_hook all -- * * 0.0.0.0/0 0.0.0.0/0
561 73201 fwmark all -- * * 0.0.0.0/0 0.0.0.0/0
Chain INPUT (policy ACCEPT 448 packets, 40628 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 113 packets, 32573 bytes)
pkts bytes target prot opt in out source destination
113 32573 mssfix all -- * * 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT 493 packets, 131K bytes)
pkts bytes target prot opt in out source destination
2027 526K mwan3_hook all -- * * 0.0.0.0/0 0.0.0.0/0
2027 526K mwan3_output_hook all -- * * 0.0.0.0/0 0.0.0.0/0
Chain POSTROUTING (policy ACCEPT 608 packets, 164K bytes)
pkts bytes target prot opt in out source destination
Chain fwmark (1 references)
pkts bytes target prot opt in out source destination
Chain mssfix (1 references)
pkts bytes target prot opt in out source destination
0 0 TCPMSS tcp -- * wlan0 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 /* wan (mtu_fix) */ TCPMSS clamp to PMTU
0 0 TCPMSS tcp -- * eth0.2 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 /* wan (mtu_fix) */ TCPMSS clamp to PMTU
Chain mwan3_connected (2 references)
pkts bytes target prot opt in out source destination
0 0 MARK all -- * * 0.0.0.0/0 127.0.0.0/8 MARK or 0xff00
0 0 MARK all -- * * 0.0.0.0/0 224.0.0.0/3 MARK or 0xff00
38 2009 MARK all -- * * 0.0.0.0/0 192.168.0.0/24 MARK or 0xff00
114 15587 MARK all -- * * 0.0.0.0/0 192.168.1.0/24 MARK or 0xff00
760 165K MARK all -- * * 0.0.0.0/0 192.168.2.0/24 MARK or 0xff00
Chain mwan3_hook (2 references)
pkts bytes target prot opt in out source destination
10346 6219K mwan3_ifaces all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00
5976 1345K mwan3_connected all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00
2926 679K mwan3_rules all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00
7272 5549K mwan3_connected all -- * * 0.0.0.0/0 0.0.0.0/0 mark match ! 0xff00/0xff00
Chain mwan3_iface_wan (1 references)
pkts bytes target prot opt in out source destination
0 0 MARK all -- * * 192.168.1.0/24 0.0.0.0/0 mark match 0x0/0xff00 /* wan */ MARK or 0xff00
117 15683 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00 /* wan */ MARK xset 0x200/0xff00
Chain mwan3_iface_wan2 (1 references)
pkts bytes target prot opt in out source destination
21 2934 MARK all -- * * 192.168.0.0/24 0.0.0.0/0 mark match 0x0/0xff00 /* wan2 */ MARK or 0xff00
164 24468 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00 /* wan2 */ MARK xset 0x100/0xff00
Chain mwan3_ifaces (1 references)
pkts bytes target prot opt in out source destination
185 27402 mwan3_iface_wan2 all -- eth0.2 * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00
117 15683 mwan3_iface_wan all -- wlan0 * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00
Chain mwan3_output_hook (1 references)
pkts bytes target prot opt in out source destination
Chain mwan3_policy_balanced (1 references)
pkts bytes target prot opt in out source destination
160 23796 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00 /* wan 3 3 */ MARK xset 0x200/0xff00
Chain mwan3_policy_wan2_only (0 references)
pkts bytes target prot opt in out source destination
0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00 /* wan2 2 2 */ MARK xset 0x100/0xff00
Chain mwan3_policy_wan2_wan (1 references)
pkts bytes target prot opt in out source destination
0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00 /* wan2 2 2 */ MARK xset 0x100/0xff00
Chain mwan3_policy_wan_only (0 references)
pkts bytes target prot opt in out source destination
0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00 /* wan 3 3 */ MARK xset 0x200/0xff00
Chain mwan3_policy_wan_wan2 (1 references)
pkts bytes target prot opt in out source destination
0 0 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00 /* wan 3 3 */ MARK xset 0x200/0xff00
Chain mwan3_rules (1 references)
pkts bytes target prot opt in out source destination
160 23796 mwan3_policy_balanced all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x0/0xff00 /* default_rule */
0 0 mwan3_policy_wan2_wan tcp -- * * 0.0.0.1/-1 0.0.0.0/0 multiport sports 0:65535 multiport dports 443 mark match 0x0/0xff00 /* sticky_odd */
0 0 mwan3_policy_wan_wan2 tcp -- * * 0.0.0.0/-1 0.0.0.0/0 multiport sports 0:65535 multiport dports 443 mark match 0x0/0xff00 /* sticky_even */
Chain mwan3_track_wan (0 references)
pkts bytes target prot opt in out source destination
0 0 MARK all -- * * 0.0.0.0/0 208.67.220.220 MARK or 0xff00
0 0 MARK all -- * * 0.0.0.0/0 208.67.222.222 MARK or 0xff00
0 0 MARK all -- * * 0.0.0.0/0 8.8.8.8 MARK or 0xff00
0 0 MARK all -- * * 0.0.0.0/0 8.8.4.4 MARK or 0xff00
Chain mwan3_track_wan2 (0 references)
pkts bytes target prot opt in out source destination
0 0 MARK all -- * * 0.0.0.0/0 208.67.220.220 MARK or 0xff00
0 0 MARK all -- * * 0.0.0.0/0 8.8.8.8 MARK or 0xff00[code/]
Output of "ip rule show" :
0: from all lookup local
1001: from all iif eth0.2 lookup main
1002: from all iif wlan0 lookup main
2001: from all fwmark 0x100/0xff00 lookup 1
2002: from all fwmark 0x200/0xff00 lookup 2
2254: from all fwmark 0xfe00/0xff00 unreachable
32766: from all lookup main
32767: from all lookup default
80000: from 192.168.2.1 nop
80000: from 127.0.0.1 nop
80000: from 192.168.0.209 nop
80000: from 192.168.1.84 nop
90000: from 192.168.2.1/24 nop
90000: from 127.0.0.1/8 nop
90000: from 192.168.0.209/24 nop
90000: from 192.168.1.84/24 nop
hola a todos,raphik por favor quiero un enlance con la compilation tuya Chaos Calmer r42435 para ar-5387un >:( Gracias
Hola
Tengo router TP-Link TL-WR703N con versión LuCI Trunk (svn-r10521) OpenWrt Chaos Calmer r42418
Al intentar instalar mwan3 me da este error
//usr/lib/opkg/info/luci-i18n-spanish.postinst: line 4: default_postinst: not found
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for mwan3:
* kernel (= 3.10.49-1-567826d15415b073430d1fe9be9d91f3) * kernel (= 3.10.49-1-567826d15415b073430d1fe9be9d91f3) *
* opkg_install_cmd: Cannot install package mwan3.
* pkg_run_script: package "luci-i18n-spanish" postinst script returned status 127.
* opkg_configure: luci-i18n-spanish.postinst returned 127.
Hola Cristof_Romuard,
Pruebas con esta versión de la rama trunk, hg556a compilación r42668 que trae: nano, el paquete pre cargado de mwan3, 3g y los driver para algunas wifi usb (+kmod-zd1211rw+kmod-rt2800-usb+ath9k-htc+kmod-rt73usb+kmod-rtl8187+kmod-rtl8192ce+kmod-rtl8192cu+kmod-rtl8192de+kmod-rtl8192se+kmod-net-zd1201+kmod-p54-usb+kmod-rt2500-usb ).
compilación Chaos Calmer r42668 versión A (https://drive.google.com/file/d/0ByLHkumzyj7iNU1iRG0wVzRvRlU/edit?usp=sharing)
compilación Chaos Calmer r42668 versión B (https://drive.google.com/file/d/0ByLHkumzyj7iUXp1Q3NQNkNzcW8/edit?usp=sharing)
compilación Chaos Calmer r42668 versión C (https://drive.google.com/file/d/0ByLHkumzyj7iWHJVRnBqWkJFRm8/edit?usp=sharing)
Ya contaras como te va.
Saludos.
hola Cristof_Romuard,
a mi me se paso equal por fin instale OpenWrt Barrier Breaker 14.07-rc3 / LuCI Trunk (git-7a26a77) y va bien todo a mi con 1 wan y wwan (tengo hg556a ver c) ;D
Hola Cristof_Romuard,
Dijiste en otro post que tu router era del tipo C, pero si ahora descubres que en realidad es del tipo A, intenta instalar la compilación del primer post, que e probado intensamente.
compilación Chaos Calmer r42261 versión A (https://drive.google.com/file/d/0ByLHkumzyj7ibmR0R1d5bHQ1Ujg/edit?usp=sharing)
Para saber el tipo de router hg556a que tienes visita la pagina http://wiki.openwrt.org/toh/huawei/hg556a
PD: También puedes instalar la Barrier Braker los enlaces están en la wiki de openwrt.
saludos.
WARNING: some interfaces have no default route in the main routing table!
WARNING: some interfaces are configured incorrectly or not at all in /etc/config/network!
WARNING: some interfaces have no metric configured in /etc/config/network!
alguien me puede pasar el link para un Huawei HG556a con chipse atheros..... y que funcione bien el wifi!!!
e probado las 3 versiones del amigo, y al final la que me funciono fue la compilación Chaos Calmer r42668 versión B pero el wifi falla.
se conecta y se desconecta.
tenia que eliminar la interfaz y reactivarla....
segun comenta "portacosmin" la version : OpenWrt Barrier Breaker 14.07-rc3 / LuCI Trunk (git-7a26a77) le funciona, pero yo no la encuentro!!!
seria alguien tan amable de pegar el link!!!!!
al final voy a meter la para e instalar alguna que no vale...
saludos y gracias.
creo que este es el link https://www.dropbox.com/s/nj9wvpzucse2bmt/openwrt-HW556-squashfs-cfe.bin?dl=0
ese es el que aun me funciona!
root@OpenWrt:/# dmesg
[ 0.000000] Linux version 3.14.18 (eme@eme-desktop) (gcc version 4.8.3 (OpenW
rt/Linaro GCC 4.8-2014.04 r42668) ) #6 Sat Sep 27 11:47:51 CEST 2014
[ 0.000000] Detected Broadcom 0x6358 CPU revision a1
[ 0.000000] CPU frequency is 300 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] registering 40 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xbe000000
[ 0.000000] board_bcm963xx: CFE version: d081.5003
[ 0.000000] bcm63xx_nvram: nvram checksum failed, contents may be invalid (ex
pected 33313530, got 75b2d66f)
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0002a010 (Broadcom BMIPS4350)
[ 0.000000] board: board name: HW556_C
[ 0.000000] MIPS: machine is Huawei EchoLife HG556a (version C)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 803164d0, node_mem_map 81000be
0
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16
bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 16256
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jff
s2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 60180K/65536K available (2536K kernel code, 135K rwdata,
524K rodata, 1276K init, 187K bss, 5356K reserved)
[ 0.000000] NR_IRQS:256
[ 0.036000] Calibrating delay loop... 297.98 BogoMIPS (lpj=595968)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.044000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.056000] NET: Registered protocol family 16
[ 0.076000] registering PCI controller with io_map_base unset
[ 0.100000] bio: create slab <bio-0> at 0
[ 0.108000] PCI host bridge to bus 0000:00
[ 0.112000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 0.116000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
[ 0.120000] pci_bus 0000:00: No busn resource found for root bus, will use [b
us 00-ff]
[ 0.124000] pci 0000:00:01.0: [1814:3592] type 00 class 0x028000
[ 0.124000] pci 0000:00:01.0: reg 0x10: [mem 0xffff0000-0xffffffff]
[ 0.128000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.132000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.132000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[ 0.140000] Switched to clocksource MIPS
[ 0.156000] NET: Registered protocol family 2
[ 0.164000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.172000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.176000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.184000] TCP: reno registered
[ 0.188000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.196000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.200000] NET: Registered protocol family 1
[ 0.208000] PCI: CLS 0 bytes, default 16
[ 0.212000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.220000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.228000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT
Y) (c) 2001-2006 Red Hat, Inc.
[ 0.236000] msgmni has been set to 117
[ 0.244000] io scheduler noop registered
[ 0.248000] io scheduler deadline registered (default)
[ 0.256000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10, base_baud = 1
562500) is a bcm63xx_uart
[ 0.264000] console [ttyS0] enabled
[ 0.272000] bootconsole [early0] disabled
[ 0.288000] 1e000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufact
urer ID 0x0000c2 Chip ID 0x00227e
[ 0.300000] 1e000000.nor: Found an alias at 0x1000000 for the chip at 0x0
[ 0.300000] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.304000] Amd/Fujitsu Extended Query version 1.3.
[ 0.308000] number of CFI chips: 1
[ 0.312000] bcm63xxpart: CFE boot tag found with version 8 and board type HW5
56
[ 0.320000] 6 bcm63xxpart partitions found on MTD device 1e000000.nor
[ 0.328000] Creating 6 MTD partitions on "1e000000.nor":
[ 0.332000] 0x000000000000-0x000000020000 : "CFE"
[ 0.344000] 0x000000020100-0x000000140000 : "kernel"
[ 0.348000] mtd: partition "kernel" must either start or end on erase block b
oundary or be smaller than an erase block -- forcing read-only
[ 0.368000] 0x000000140000-0x000000ee0000 : "rootfs"
[ 0.376000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.384000] mtd: partition "rootfs_data" created automatically, ofs=0x480000,
len=0xa60000
[ 0.392000] 0x000000480000-0x000000ee0000 : "rootfs_data"
[ 0.400000] 0x000000020000-0x000000ee0000 : "linux"
[ 0.412000] 0x000000ee0000-0x000000fe0000 : "cal_data"
[ 0.420000] 0x000000fe0000-0x000001000000 : "nvram"
[ 0.436000] bcm63xx-spi bcm63xx-spi: at 0xfffe0800 (irq 9, FIFOs size 542)
[ 0.456000] libphy: bcm63xx_enet MII bus: probed
[ 0.524000] b53_common: found switch: BCM5325, rev 0
[ 0.532000] bcm63xx_enet bcm63xx_enet.1: attached PHY at address 0 [Broadcom
B53 (1)]
[ 0.544000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.564000] TCP: cubic registered
[ 0.568000] NET: Registered protocol family 17
[ 0.572000] 8021q: 802.1Q VLAN Support v1.8
[ 0.592000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.620000] Freeing unused kernel memory: 1276K (80331000 - 80470000)
[ 5.508000] usbcore: registered new interface driver usbfs
[ 5.516000] usbcore: registered new interface driver hub
[ 5.524000] usbcore: registered new device driver usb
[ 5.540000] Button Hotplug driver version 0.4.1
[ 5.552000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.560000] ehci-platform: EHCI generic platform driver
[ 5.568000] ehci-platform ehci-platform: EHCI Host Controller
[ 5.572000] ehci-platform ehci-platform: new USB bus registered, assigned bus
number 1
[ 5.580000] ehci-platform ehci-platform: irq 18, io mem 0xfffe1300
[ 5.600000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurr
ent ignored
[ 5.608000] hub 1-0:1.0: USB hub found
[ 5.612000] hub 1-0:1.0: 2 ports detected
[ 5.628000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.636000] ohci-platform: OHCI generic platform driver
[ 5.644000] ohci-platform ohci-platform: Generic Platform OHCI controller
[ 5.648000] ohci-platform ohci-platform: new USB bus registered, assigned bus
number 2
[ 5.656000] ohci-platform ohci-platform: irq 13, io mem 0xfffe1400
[ 5.724000] hub 2-0:1.0: USB hub found
[ 5.728000] hub 2-0:1.0: 2 ports detected
[ 5.744000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/i
nput/input0
[ 6.180000] random: nonblocking pool is initialized
[ 6.456000] usb 1-2: new high-speed USB device number 2 using ehci-platform
[ 6.988000] hub 1-2:1.0: USB hub found
[ 6.992000] hub 1-2:1.0: 4 ports detected
[ 8.796000] eth0: link UP - 100/full - flow control off
[ 10.676000] jffs2: notice: (246) jffs2_build_xattr_subsystem: complete buildi
ng xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 11 of xref (0 dead,
1 orphan) found.
[ 10.912000] eth0: link DOWN
[ 17.164000] NET: Registered protocol family 10
[ 17.184000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.220000] Loading modules backported from Linux version master-2014-05-22-0
-gf2032ea
[ 17.228000] Backport generated by backports.git backports-20140320-37-g5c33da
0
[ 17.244000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.280000] nf_conntrack version 0.5.0 (960 buckets, 3840 max)
[ 17.344000] usbcore: registered new interface driver usbserial
[ 17.348000] usbcore: registered new interface driver usbserial_generic
[ 17.356000] usbserial: USB Serial support registered for generic
[ 17.408000] xt_time: kernel timezone is -0000
[ 17.420000] usbcore: registered new interface driver zd1201
[ 17.504000] cfg80211: Calling CRDA to update world regulatory domain
[ 17.516000] cfg80211: World regulatory domain updated:
[ 17.520000] cfg80211: DFS Master region: unset
[ 17.524000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai
n, max_eirp), (dfs_cac_time)
[ 17.536000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 17.544000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 17.552000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 17.560000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000
mBm), (N/A)
[ 17.568000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 17.576000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 17.584000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 17.592000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 17.740000] usbcore: registered new interface driver p54usb
[ 17.756000] PPP generic driver version 2.4.2
[ 17.764000] NET: Registered protocol family 24
[ 17.800000] usbcore: registered new interface driver rt73usb
[ 17.816000] usbcore: registered new interface driver rtl8187
[ 17.860000] usbcore: registered new interface driver zd1211rw
[ 17.936000] usbcore: registered new interface driver option
[ 17.944000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 17.968000] usbcore: registered new interface driver rt2500usb
[ 18.004000] usbcore: registered new interface driver rt2800usb
[ 18.048000] usbcore: registered new interface driver ath9k_htc
[ 18.084000] usbcore: registered new interface driver rtl8192cu
[ 22.688000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.044000] eth0: link UP - 100/full - flow control off
[ 23.048000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.784000] device eth0.1 entered promiscuous mode
[ 33.788000] device eth0 entered promiscuous mode
[ 33.800000] br-lan: port 1(eth0.1) entered forwarding state
[ 33.804000] br-lan: port 1(eth0.1) entered forwarding state
[ 34.168000] eth0: link UP - 100/full - flow control off
[ 35.808000] br-lan: port 1(eth0.1) entered forwarding state
root@OpenWrt:/#
instala el del compañero portacosmin que funciona todo, este:
https://mega.co.nz/#!5Mk0WS4J!WxZMYmgYlCCCDPJ19DLo9j8eiJuhbabozIxdiv6lBcQ
Hola chicos,
Viendo los problemas he hecho una nueva compilación para el hg556a r42868 de la rama trunk. Ya tiene instalado el MWAN3 directamente, esto puede dar problemas en algunas configuraciones pero no pasa abitualmente, hay una manera de solucionarlo: desinstalar el MWAN3 del la compilación y después de un reinicio volver a instalarlo y reiniciar. Tiene los controladores kmod-rt2800-usb, kmod-zd1211rw, 3g y nano:
HG556a compilación Chaos Calmer r42868 versión A (https://drive.google.com/file/d/0ByLHkumzyj7iQ0VRdkZmZ2RDSlE/view?usp=sharing)
HG556a compilación Chaos Calmer r42868 versión B (https://drive.google.com/file/d/0ByLHkumzyj7iR1E5Zkg1N2MzYTQ/view?usp=sharing)
HG556a compilación Chaos Calmer r42868 versión C (https://drive.google.com/file/d/0ByLHkumzyj7iVXlCWlRVYVBabzg/view?usp=sharing)
Yo solamente he provado la versión A que es el router que tengo. Si a alguien le sirve la versión B y C que lo diga para poner estas compilaciones en el primer post.
Saludos ;D
bueno.. tengo el mwan3 funcionando a medias..
tego puesta la configuracion que me paso el amigo potacosmin
pero solo tiene 2 wan activas, la wwan (wlan0) y wan (eth0.2)
el caso es que yo no podia poner la WWAN en modo wan.. y que me saliera activa el mwan3
yo quiero tener 3 wan( wifi/cliente y 2 lineas mas) pero no hay manera...
les creo me dan pin a google las lan!!! pero el wifi interno no hay manera de que aparezca (a mi)
con la configuracion de potacosmin SI que aparece la wlan0 como wan y reconocida por mwan3
pero cuando la creo o "intento" creala yo.... nanai de la china.
me gustaria saber si hay alguna posibilidad de crear mas wansi borrar todo de cero?
seria implementar mas wan a las que ya hay creada y funcionando (wwan (wlan0) y wan (eth0.2)
seria : ya creada y funcionando wwan (wlan0) y wan (eth0.2) mas +++++ wan2 (eth03)
no hay manera de crear wan2(eth03) y agregarla a las ya funcionales...............
saludos y espero no explicarme muy mal!!!!!
Más de lo mismo, no me detecta el wifi interno. He puesto la versión C. Voy a probar la versión A a ver si suena la flauta.
Buen trabajo emeryth... >:( >:( >:(
Ahora solo falta que los inutiles como yo sepamos hacerlo andar..... :-\ :-\ :-\
salu2
Más de lo mismo, no me detecta el wifi interno. He puesto la versión C. Voy a probar la versión A a ver si suena la flauta.
Buen trabajo emeryth... >:( >:( >:(
Ahora solo falta que los inutiles como yo sepamos hacerlo andar..... :-\ :-\ :-\
salu2
¿Alguna obcecación especial para hacerlo andar con Chaos Chalmer en lugar de con la estable de Barrier Breaker? ^-^
Más de lo mismo, no me detecta el wifi interno. He puesto la versión C. Voy a probar la versión A a ver si suena la flauta.
Buen trabajo emeryth... >:( >:( >:(
Ahora solo falta que los inutiles como yo sepamos hacerlo andar..... :-\ :-\ :-\
salu2
¿Alguna obcecación especial para hacerlo andar con Chaos Chalmer en lugar de con la estable de Barrier Breaker? ^-^
Ninguna, al contrario, si alguien me dice que funciona de lujo con Attitude Adjustment o cualquier otra, yo lo instalo del tirón... ;D ;D ;D
Más de lo mismo, no me detecta el wifi interno. He puesto la versión C. Voy a probar la versión A a ver si suena la flauta.
Buen trabajo emeryth... >:( >:( >:(
Ahora solo falta que los inutiles como yo sepamos hacerlo andar..... :-\ :-\ :-\
salu2
¿Alguna obcecación especial para hacerlo andar con Chaos Chalmer en lugar de con la estable de Barrier Breaker? ^-^
Ninguna, al contrario, si alguien me dice que funciona de lujo con Attitude Adjustment o cualquier otra, yo lo instalo del tirón... ;D ;D ;D
Pues prueba la versión estable de Barrier Breaker. Sólo tiene una versión para el HG556 así que debiera funcionar con los tres tipos de router.
https://downloads.openwrt.org/barrier_breaker/14.07/brcm63xx/generic/
Además no tendrás problemas a la hora de instalar paquetes adicionales...
wget: server returned error: HTTP/1.1 404 Not Found
Collected errors:
* opkg_download: Failed to download http://downloads.openwrt.org/snapshots/trunk/brcm63xx/packages/Packages.gz, wget returned 1.
Es la que estaba probando y todo bien excepto que no me deja actualizar las lista de paquetes:Código: [Seleccionar]wget: server returned error: HTTP/1.1 404 Not Found
Collected errors:
* opkg_download: Failed to download http://downloads.openwrt.org/snapshots/trunk/brcm63xx/packages/Packages.gz, wget returned 1.
¿Algún consejo?
Gracias
Pues prueba la versión estable de Barrier Breaker. Sólo tiene una versión para el HG556 así que debiera funcionar con los tres tipos de router.
https://downloads.openwrt.org/barrier_breaker/14.07/brcm63xx/generic/
Además no tendrás problemas a la hora de instalar paquetes adicionales...
Más de lo mismo, no me detecta el wifi interno. He puesto la versión C. Voy a probar la versión A a ver si suena la flauta.
Buen trabajo emeryth... >:( >:( >:(
Ahora solo falta que los inutiles como yo sepamos hacerlo andar..... :-\ :-\ :-\
salu2
¿Alguna obcecación especial para hacerlo andar con Chaos Chalmer en lugar de con la estable de Barrier Breaker? ^-^
Ninguna, al contrario, si alguien me dice que funciona de lujo con Attitude Adjustment o cualquier otra, yo lo instalo del tirón... ;D ;D ;D
Pues prueba la versión estable de Barrier Breaker. Sólo tiene una versión para el HG556 así que debiera funcionar con los tres tipos de router.
https://downloads.openwrt.org/barrier_breaker/14.07/brcm63xx/generic/
Además no tendrás problemas a la hora de instalar paquetes adicionales...
Es la que estaba probando y todo bien excepto que no me deja actualizar las lista de paquetes:Código: [Seleccionar]wget: server returned error: HTTP/1.1 404 Not Found
Collected errors:
* opkg_download: Failed to download http://downloads.openwrt.org/snapshots/trunk/brcm63xx/packages/Packages.gz, wget returned 1.
¿Algún consejo?
Gracias
La que yo tengo si lo detecta. Es la que puso unos post mas arriba portacosmin.Pues prueba la versión estable de Barrier Breaker. Sólo tiene una versión para el HG556 así que debiera funcionar con los tres tipos de router.
https://downloads.openwrt.org/barrier_breaker/14.07/brcm63xx/generic/
Además no tendrás problemas a la hora de instalar paquetes adicionales...
La versión estable de BB no detecta el dispositivo wifi en mis routers tipo B ni C.
Saludos.