Hay algunas posibilidades que salir pronto supporte OpenWRT para el ADB? 1004N? (Broadcom4350)
Estoy buscando por todo el internet algunas posibilidades de cambier el firmware original...pero nada.
[ 0.544000] Please append a correct "root=" boot option; here are the available partitions:
[ 0.556000] 1f00 16384 mtdblock0 (driver?)
[ 0.560000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
gmtii, a la espera de tus progresos con el ADB (he conseguido uno) ;D
Enviado desde mi u8500 usando Tapatalk 2
Bueno, finálmente ya me llegó el ADB.
Si hay algo que pueda hacer ... ;D
puedes ir probado lo que tengo hasta ahora...
firmware compilado (no va ni el usb ni el wifi)
http://www.mediafire.com/?3o0mxveubuvl0bl
Lo probaré, gracias ;)
Podré flashearlo directamente desde el interfaz web actual ?
Sólo por curiosidad (espero que no sea demasiado off-topic :$), el firmware lo has compilado tú desde el GPL?
Si no es así cómo lo has conseguido? Gracias por adelantado ;)
Felicidades gmtii!!!!!
Como ya dije otro dia dispongo de un router adb, todavia no he instalado openwrt en él. Lo quiero utilizar como servidor de descargas transmision, pero veo que el usb no funciona. En el log aparece esto:
[ 11.800000] Initializing USB Mass Storage driver...
[ 11.804000] usbcore: registered new interface driver usb-storage
[ 11.812000] USB Mass Storage support registered
Quiere decir esto que reconoce el puerto usb? que necesitamos para hacer funcionar el usb y el wifi? Siento no poder ayudarte en tema de complilar y todo eso.. pero si necesitas algun tester aqui me tienes y creo que jar229 estaria encantado de hacer funcionar el cacharro con todo ;D
Salu2 y muchas gracias por tu trabajo
buenas,
eso son los drivers que van en el kernel; tanto el usb como el wifi tiene los drivers cargados, pero nada, no detecta el hardware... dependemos a partir de ahora de kanjimonster y florian ^-^
Gracias gmtii
Los drivers estan listos, ahora falta que detecte el hard... Se puede ver en algun sitio si hay avances por parte de kanjimonster y florian? Ya tienen conocimiento del problema que tenemos con nuestro router?
Salu2
Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
Aquí va lo que pides ;)
# dmesg
[spoiler]
MAC Address: 30:39:F2:83:XX:ZZ
eth3: MAC Address: 30:39:F2:83:XX:ZZ
eth0 Link UP 100 mbps full duplex
message received before monitor task is initialized kerSysSendtoMonitorTask
BCM63XX_USB USB Device not present
scsi 0:0:0:0: Direct-Access USB0912B Flash Disk 8.07 PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 0:0:0:0: [sda] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda:<5>scsi 1:0:0:0: Direct-Access USB2.0 FlashDisk 0.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 1:0:0:0: [sdb] 4028936 512-byte hardware sectors: (2.06 GB/1.92 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI removable disk
sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:02:00.0 to 64
wl:srom not detected,using main memory mapped srom info(wombo board)
wl:loading /etc/wlan/bcm43225_map.bin
wl0: Broadcom BCMa8d8 802.11 Wireless Controller 5.60.120.1.cpePDG_TEF_SP_4.06L4.2
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
device eth0 entered promiscuous mode
br0: port 1(eth0) entering forwarding state
ip_tables: (C) 2000-2006 Netfilter Core Team
device eth1 entered promiscuous mode
device eth2 entered promiscuous mode
device eth3 entered promiscuous mode
device wl0 entered promiscuous mode
br0: port 5(wl0) entering forwarding state
BcmAdsl_Initialize=0xC00A10D8, g_pFnNotifyCallback=0xC00D1E04
pSdramPHY=0xA1FFFFF8, 0x1B79DA 0xDEADBEEF
AdslCoreSharedMemInit: shareMemAvailable=484928
AdslCoreHwReset: AdslOemDataAddr = 0xA1F6AEB4
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
XTM Init: 400 rx BDs at 0xa0bb4000
XTM Init: 100 rx BDs at 0xa0b8c800
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (496 buckets, 1984 max)
monitor task is initialized pid= 320
backup_psi_number_blk=6 result=24576
device wl0 left promiscuous mode
br0: port 5(wl0) entering disabled state
device wl0 entered promiscuous mode
br0: port 5(wl0) entering forwarding state
backup_psi_number_blk=6 result=24576
wl0.1 (): not using net_device_ops yet
wl0.2 (): not using net_device_ops yet
wl0.3 (): not using net_device_ops yet
br0: port 5(wl0) entering disabled state
device wl0 left promiscuous mode
br0: port 5(wl0) entering disabled state
device wl0 entered promiscuous mode
br0: port 5(wl0) entering forwarding state
wds0.1 (): not using net_device_ops yet
device wds0.1 entered promiscuous mode
br0: port 6(wds0.1) entering forwarding state
br0: starting userspace STP failed, starting kernel STP
Algorithmics/MIPS FPU Emulator v1.5
backup_psi_number_blk=6 result=24576
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
usb 1-1.2: USB disconnect, address 3
usb 1-1.4: USB disconnect, address 5
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
backup_psi_number_blk=6 result=24576
backup_psi_number_blk=6 result=24576
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth0 Link DOWN.
br0: port 1(eth0) entering disabled state
eth0 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state
eth1 Link UP 100 mbps full duplex
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
eth1 Link DOWN.
br0: port 2(eth1) entering disabled state[/spoiler]
# cat /proc/bus/pci/devices
[spoiler]0048 14e46300 31 10002600 0 0 0 0 0 0 100 0 0 0 0 0 0 ohci_hcd
0050 14e46300 32 10002500 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci_hcd
0100 14e46328 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver
0200 14e4a8d8 1f 10f00004 0 0 0 0 0 0 4000 0 0 0 0 0 0 wl
# cat /proc/bus/pci/devices
0048 14e46300 31 10002600 0 0 0 0 0 0 100 0 0 0 0 0 0 ohci_hcd
0050 14e46300 32 10002500 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci_hcd
0100 14e46328 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver
0200 14e4a8d8 1f 10f00004 0 0 0 0 0 0 4000 0 0 0 0 0 0 wl[/spoiler]
Por si acaso, aclaro:
Ahora mismo está enlanzado mediantes WDS (con encriptación wpa) con otro router, un Comtrend ar-5381un.
Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
hola,
Ví tu correo en el hilo del comtrend y ya me sonó el tema :-)
claramente es el problema de este router. En el firmware original tenemos lo siguiente:
00:09.0 Class 0c03: 14e4:6300
00:0a.0 Class 0c03: 14e4:6300
01:00.0 Class 0604: 14e4:6328
02:00.0 Class 0280: 14e4:a8d8
en OpenWrt:
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.304000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.304000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.304000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.304000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.304000] pci 0000:01:00.0: supports D1 D2
[ 0.304000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.308000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.312000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.316000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.320000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Claramente no detecta ni el USB 14e4:6300 ni el WIFI 14e4:a8d8 (no he encontrado el modelo de chipset broadcom al que corresponde aún)
Luego aplico tu parche a ver si el WIFI está soportado (en el fw original emplea el wl propietario)
Saludos!Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
hola,
Ví tu correo en el hilo del comtrend y ya me sonó el tema :-)
claramente es el problema de este router. En el firmware original tenemos lo siguiente:
00:09.0 Class 0c03: 14e4:6300
00:0a.0 Class 0c03: 14e4:6300
01:00.0 Class 0604: 14e4:6328
02:00.0 Class 0280: 14e4:a8d8
en OpenWrt:
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.304000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.304000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.304000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.304000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.304000] pci 0000:01:00.0: supports D1 D2
[ 0.304000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.308000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.312000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.316000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.320000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Claramente no detecta ni el USB 14e4:6300 ni el WIFI 14e4:a8d8 (no he encontrado el modelo de chipset broadcom al que corresponde aún)
Luego aplico tu parche a ver si el WIFI está soportado (en el fw original emplea el wl propietario)
Saludos!Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
Aquí lo tienes.
https://dl.dropbox.com/u/4708147/openwrt/63281T/62381T_wlan.patch
Si puedes pon un log de arranque completo y un "cat /proc/bus/pci/devices".
Saludos!
hola,
Ví tu correo en el hilo del comtrend y ya me sonó el tema :-)
claramente es el problema de este router. En el firmware original tenemos lo siguiente:
00:09.0 Class 0c03: 14e4:6300
00:0a.0 Class 0c03: 14e4:6300
01:00.0 Class 0604: 14e4:6328
02:00.0 Class 0280: 14e4:a8d8
en OpenWrt:
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.304000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.304000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.304000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.304000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.304000] pci 0000:01:00.0: supports D1 D2
[ 0.304000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.308000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.312000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.316000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.320000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Claramente no detecta ni el USB 14e4:6300 ni el WIFI 14e4:a8d8 (no he encontrado el modelo de chipset broadcom al que corresponde aún)
Luego aplico tu parche a ver si el WIFI está soportado (en el fw original emplea el wl propietario)
Saludos!Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
Aquí lo tienes.
https://dl.dropbox.com/u/4708147/openwrt/63281T/62381T_wlan.patch
Si puedes pon un log de arranque completo y un "cat /proc/bus/pci/devices".
Saludos!
hola,
Ví tu correo en el hilo del comtrend y ya me sonó el tema :-)
claramente es el problema de este router. En el firmware original tenemos lo siguiente:
00:09.0 Class 0c03: 14e4:6300
00:0a.0 Class 0c03: 14e4:6300
01:00.0 Class 0604: 14e4:6328
02:00.0 Class 0280: 14e4:a8d8
en OpenWrt:
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.304000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.304000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.304000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.304000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.304000] pci 0000:01:00.0: supports D1 D2
[ 0.304000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.308000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.312000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.316000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.320000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Claramente no detecta ni el USB 14e4:6300 ni el WIFI 14e4:a8d8 (no he encontrado el modelo de chipset broadcom al que corresponde aún)
Luego aplico tu parche a ver si el WIFI está soportado (en el fw original emplea el wl propietario)
Saludos!Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
Aquí lo tienes.
https://dl.dropbox.com/u/4708147/openwrt/63281T/62381T_wlan.patch
Si puedes pon un log de arranque completo y un "cat /proc/bus/pci/devices".
Saludos!
Prueba mi compilación porfa: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe.bin
Saludos!
buenas,
la detecta pero al configurarla no encuentra el interface radio0
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC2
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: 65.52.48-48.49
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29416k/32768k available (2219k kernel code, 3352k reserved, 396k data, 196k init,)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.284000] bio: create slab <bio-0> at 0
[ 0.288000] PCI host bridge to bus 0000:00
[ 0.292000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.296000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.300000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.304000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.308000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.312000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.316000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.320000] Switching to clocksource MIPS
[ 0.328000] NET: Registered protocol family 2
[ 0.332000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.340000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.348000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.356000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.360000] TCP reno registered
[ 0.364000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.372000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.376000] NET: Registered protocol family 1
[ 0.384000] audit: initializing netlink socket (disabled)
[ 0.392000] type=2000 audit(0.392:1): initialized
[ 0.396000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.404000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat,.
[ 0.412000] msgmni has been set to 57
[ 0.416000] io scheduler noop registered
[ 0.420000] io scheduler deadline registered (default)
�[ 0.436000] console [ttyS0] enabled, bootconsole disabled= 36) is a bcm63xx_uart
[ 0.436000] console [ttyS0] enabled, bootconsole disabled
[ 0.456000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.460000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.468000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.476000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.480000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.488000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.496000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.504000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.512000] bcm63xxpart: Spare partition is offset 260004 and length d8fffc
[ 0.516000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.524000] Creating 5 MTD partitions on "spi0.0":
[ 0.528000] 0x000000000000-0x000000010000 : "CFE"
[ 0.536000] 0x000000010100-0x000000100000 : "kernel"
[ 0.540000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller thy
[ 0.556000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.564000] mtd: partition "rootfs" set to be root filesystem
[ 0.572000] mtd: partition "rootfs_data" created automatically, ofs=260000, len=D90000
[ 0.580000] 0x000000260000-0x000000ff0000 : "rootfs_data"
[ 0.588000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.596000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.640000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.652000] TCP westwood registered
[ 0.656000] NET: Registered protocol family 17
[ 0.660000] 8021q: 802.1Q VLAN Support v1.8
[ 0.676000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.684000] Freeing unused kernel memory: 196k freed
awk: /proc/cpuinfo: No such file or directory
[ 3.176000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.388000] roboswitch: Probing device eth0:
[ 3.392000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.400000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.408000] roboswitch: Probing device eth1: No such device
[ 3.412000] roboswitch: Probing device eth2: No such device
[ 3.420000] roboswitch: Probing device eth3: No such device
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -
Please press Enter to activate this console. [ 10.820000] Compat-wireless backport release: compat-wir7
[ 10.824000] Backport based on wireless-testing.git master-2012-05-29
[ 10.832000] compat.git: wireless-testing.git
[ 10.888000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.892000] cfg80211: World regulatory domain updated:
[ 10.900000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.908000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.916000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.924000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.932000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.940000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.204000] There is already a switch registered on the device 'eth0'
[ 11.208000] roboswitch: Probing device eth1: No such device
[ 11.216000] roboswitch: Probing device eth2: No such device
[ 11.220000] roboswitch: Probing device eth3: No such device
[ 11.600000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 11.604000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 11.612000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 11.620000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 11.628000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 11.708000] bcma: Failed to get SPROM: -71
[ 11.712000] bcma: Bus registered
[ 12.000000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 12.004000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 12.044000] Button Hotplug driver version 0.4.1
[ 12.248000] PPP generic driver version 2.4.2
[ 12.788000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.976000] NET: Registered protocol family 24
[ 13.032000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 18.352000] device eth0 entered promiscuous mode
[ 18.356000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 18.364000] br-lan: port 1(eth0) entered forwarding state
[ 18.372000] br-lan: port 1(eth0) entered forwarding state
[ 20.376000] br-lan: port 1(eth0) entered forwarding state
[/spoiler]hola,
Ví tu correo en el hilo del comtrend y ya me sonó el tema :-)
claramente es el problema de este router. En el firmware original tenemos lo siguiente:
00:09.0 Class 0c03: 14e4:6300
00:0a.0 Class 0c03: 14e4:6300
01:00.0 Class 0604: 14e4:6328
02:00.0 Class 0280: 14e4:a8d8
en OpenWrt:
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.304000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.304000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.304000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.304000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.304000] pci 0000:01:00.0: supports D1 D2
[ 0.304000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.308000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.312000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.316000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.320000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Claramente no detecta ni el USB 14e4:6300 ni el WIFI 14e4:a8d8 (no he encontrado el modelo de chipset broadcom al que corresponde aún)
Luego aplico tu parche a ver si el WIFI está soportado (en el fw original emplea el wl propietario)
Saludos!Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
Aquí lo tienes.
https://dl.dropbox.com/u/4708147/openwrt/63281T/62381T_wlan.patch
Si puedes pon un log de arranque completo y un "cat /proc/bus/pci/devices".
Saludos!
Prueba mi compilación porfa: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe.bin
Saludos!
config wifi-device radio0
option type mac80211
option channel 11
option macaddr 00:00:00:00:00:00
option hwmode 11g
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
option device radio0
option network lan
option mode ap
option ssid OpenWrt
option encryption none
buenas,
la detecta pero al configurarla no encuentra el interface radio0
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC2
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: 65.52.48-48.49
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29416k/32768k available (2219k kernel code, 3352k reserved, 396k data, 196k init,)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.284000] bio: create slab <bio-0> at 0
[ 0.288000] PCI host bridge to bus 0000:00
[ 0.292000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.296000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.300000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.304000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.308000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.312000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.316000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.320000] Switching to clocksource MIPS
[ 0.328000] NET: Registered protocol family 2
[ 0.332000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.340000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.348000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.356000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.360000] TCP reno registered
[ 0.364000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.372000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.376000] NET: Registered protocol family 1
[ 0.384000] audit: initializing netlink socket (disabled)
[ 0.392000] type=2000 audit(0.392:1): initialized
[ 0.396000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.404000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat,.
[ 0.412000] msgmni has been set to 57
[ 0.416000] io scheduler noop registered
[ 0.420000] io scheduler deadline registered (default)
�[ 0.436000] console [ttyS0] enabled, bootconsole disabled= 36) is a bcm63xx_uart
[ 0.436000] console [ttyS0] enabled, bootconsole disabled
[ 0.456000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.460000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.468000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.476000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.480000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.488000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.496000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.504000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.512000] bcm63xxpart: Spare partition is offset 260004 and length d8fffc
[ 0.516000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.524000] Creating 5 MTD partitions on "spi0.0":
[ 0.528000] 0x000000000000-0x000000010000 : "CFE"
[ 0.536000] 0x000000010100-0x000000100000 : "kernel"
[ 0.540000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller thy
[ 0.556000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.564000] mtd: partition "rootfs" set to be root filesystem
[ 0.572000] mtd: partition "rootfs_data" created automatically, ofs=260000, len=D90000
[ 0.580000] 0x000000260000-0x000000ff0000 : "rootfs_data"
[ 0.588000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.596000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.640000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.652000] TCP westwood registered
[ 0.656000] NET: Registered protocol family 17
[ 0.660000] 8021q: 802.1Q VLAN Support v1.8
[ 0.676000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.684000] Freeing unused kernel memory: 196k freed
awk: /proc/cpuinfo: No such file or directory
[ 3.176000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.388000] roboswitch: Probing device eth0:
[ 3.392000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.400000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.408000] roboswitch: Probing device eth1: No such device
[ 3.412000] roboswitch: Probing device eth2: No such device
[ 3.420000] roboswitch: Probing device eth3: No such device
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -
Please press Enter to activate this console. [ 10.820000] Compat-wireless backport release: compat-wir7
[ 10.824000] Backport based on wireless-testing.git master-2012-05-29
[ 10.832000] compat.git: wireless-testing.git
[ 10.888000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.892000] cfg80211: World regulatory domain updated:
[ 10.900000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.908000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.916000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.924000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.932000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.940000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.204000] There is already a switch registered on the device 'eth0'
[ 11.208000] roboswitch: Probing device eth1: No such device
[ 11.216000] roboswitch: Probing device eth2: No such device
[ 11.220000] roboswitch: Probing device eth3: No such device
[ 11.600000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 11.604000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 11.612000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 11.620000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 11.628000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 11.708000] bcma: Failed to get SPROM: -71
[ 11.712000] bcma: Bus registered
[ 12.000000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 12.004000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 12.044000] Button Hotplug driver version 0.4.1
[ 12.248000] PPP generic driver version 2.4.2
[ 12.788000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.976000] NET: Registered protocol family 24
[ 13.032000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 18.352000] device eth0 entered promiscuous mode
[ 18.356000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 18.364000] br-lan: port 1(eth0) entered forwarding state
[ 18.372000] br-lan: port 1(eth0) entered forwarding state
[ 20.376000] br-lan: port 1(eth0) entered forwarding state
[/spoiler]hola,
Ví tu correo en el hilo del comtrend y ya me sonó el tema :-)
claramente es el problema de este router. En el firmware original tenemos lo siguiente:
00:09.0 Class 0c03: 14e4:6300
00:0a.0 Class 0c03: 14e4:6300
01:00.0 Class 0604: 14e4:6328
02:00.0 Class 0280: 14e4:a8d8
en OpenWrt:
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.304000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.304000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.304000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.304000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.304000] pci 0000:01:00.0: supports D1 D2
[ 0.304000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.308000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.312000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.316000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.320000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Claramente no detecta ni el USB 14e4:6300 ni el WIFI 14e4:a8d8 (no he encontrado el modelo de chipset broadcom al que corresponde aún)
Luego aplico tu parche a ver si el WIFI está soportado (en el fw original emplea el wl propietario)
Saludos!Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
Aquí lo tienes.
https://dl.dropbox.com/u/4708147/openwrt/63281T/62381T_wlan.patch
Si puedes pon un log de arranque completo y un "cat /proc/bus/pci/devices".
Saludos!
Prueba mi compilación porfa: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe.bin
Saludos!
Puedes ponerme el log completo de la detección errónea que comentas?
Además te recuerdo que primero tienes que editar /etc/config/wireless y borrar la línea de la interfaz radio0 que pone "option disabled 1". Igual el problema viene de ahí.
1) vi /etc/config/wireless
2) Si te sitúas con el puntero en una línea concreta y presionas dos veces la tecla 'd' se borra la línea. Borras la línea de la interfaz que pone option disabled 1.
3) Guardas el fichero (Escape->:wq->Enter).
4) /etc/init.d/network restart. Copia el log que devuelve este comando.
Saludos!
buenas,Vale, por lo que veo es más bien un problema de detección de MAC para el broadcom 43224.
perdona que no pusiera los logs antes... aqui va con debug activado en el driver b43:
[spoiler]
[ 0.000000] Linux version 3.3.7 (chisco@chisco-aluminio) (gcc version 4.6.3 20120201 (prerelease) (Li2
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: unknown
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3e20, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2243k kernel code, 3384k reserved, 397k data, 200k init,)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.284000] bio: create slab <bio-0> at 0
[ 0.288000] PCI host bridge to bus 0000:00
[ 0.292000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.296000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.300000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.300000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.300000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.300000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.300000] pci 0000:01:00.0: supports D1 D2
[ 0.300000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.304000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.308000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.312000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.316000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.320000] Switching to clocksource MIPS
[ 0.328000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.336000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.340000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.348000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.356000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.364000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.396000] bcma: SPROM offset 0x800
[ 0.436000] bcma: Failed to get SPROM: -71
[ 0.440000] bcma: Bus registered
[ 0.444000] NET: Registered protocol family 2
[ 0.448000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.456000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.464000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.476000] TCP reno registered
[ 0.480000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.484000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] NET: Registered protocol family 1
[ 0.496000] PCI: CLS 0 bytes, default 16
[ 0.500000] audit: initializing netlink socket (disabled)
[ 0.504000] type=2000 audit(0.504:1): initialized
[ 0.512000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.516000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat,.
[ 0.528000] msgmni has been set to 57
[ 0.532000] io scheduler noop registered
[ 0.536000] io scheduler deadline registered (default)
[ 0.544000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.552000] console [ttyS0] enabled, bootconsole disabled
[ 0.568000] bcm63xx-hsspi bcm63xx-hsspi.0: registered master spi0
[ 0.568000] spi spi0.0: setup mode 0, 8 bits/w, 40000000 Hz max --> 0
[ 0.568000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.576000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.580000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.588000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.596000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.604000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.612000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.616000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.624000] bcm63xxpart: Spare partition is offset 2a0004 and length d4fffc
[ 0.632000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.640000] Creating 5 MTD partitions on "spi0.0":
[ 0.644000] 0x000000000000-0x000000010000 : "CFE"
[ 0.652000] 0x000000010100-0x000000100000 : "kernel"
[ 0.656000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller thy
[ 0.672000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.680000] mtd: partition "rootfs" set to be root filesystem
[ 0.684000] mtd: partition "rootfs_data" created automatically, ofs=2A0000, len=D50000
[ 0.696000] 0x0000002a0000-0x000000ff0000 : "rootfs_data"
[ 0.704000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.712000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.716000] bcm63xx-hsspi bcm63xx-hsspi.0: registered child spi0.0
[ 0.756000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.764000] Registered led device: 963281T_TEF::internet
[ 0.764000] Registered led device: 963281T_TEF::power
[ 0.764000] Registered led device: 963281T_TEF::internet-fail
[ 0.764000] Registered led device: 963281T_TEF::power-fail
[ 0.768000] Registered led device: 963281T_TEF::wps
[ 0.768000] Registered led device: 963281T_TEF::dsl
[ 0.768000] TCP westwood registered
[ 0.772000] NET: Registered protocol family 17
[ 0.776000] 8021q: 802.1Q VLAN Support v1.8
[ 0.788000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.800000] Freeing unused kernel memory: 200k freed
[ 3.364000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.592000] roboswitch: Probing device eth0:
[ 3.596000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.604000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.612000] roboswitch: Probing device eth1: No such device
[ 3.616000] roboswitch: Probing device eth2: No such device
[ 3.624000] roboswitch: Probing device eth3: No such device
[ 11.064000] Compat-wireless backport release: compat-wireless-2012-05-16-3-gde86a47
[ 11.072000] Backport based on wireless-testing.git master-2012-05-29
[ 11.080000] compat.git: wireless-testing.git
[ 11.136000] cfg80211: Calling CRDA to update world regulatory domain
[ 11.140000] cfg80211: World regulatory domain updated:
[ 11.144000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.156000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.164000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.172000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.180000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.188000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.608000] SCSI subsystem initialized
[ 11.652000] There is already a switch registered on the device 'eth0'
[ 11.660000] roboswitch: Probing device eth1: No such device
[ 11.664000] roboswitch: Probing device eth2: No such device
[ 11.668000] roboswitch: Probing device eth3: No such device
[ 11.892000] usbcore: registered new interface driver usbfs
[ 11.900000] usbcore: registered new interface driver hub
[ 11.908000] usbcore: registered new device driver usb
[ 12.316000] bcma: exports duplicate symbol bcma_core_dma_translation (owned by kernel)
[ 12.660000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 12.664000] bcma: Switched to core: 0x812
[ 12.664000] b43-phy0 debug: Found PHY: Analog 8, Type 4, Revision 6
[ 12.664000] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2056, Revision 11
[ 12.668000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 12.704000] Button Hotplug driver version 0.4.1
[ 13.348000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.848000] PPP generic driver version 2.4.2
[ 14.216000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.412000] NET: Registered protocol family 24
[ 14.628000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.668000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 15.348000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.428000] usbcore: registered new interface driver cdc_acm
[ 15.436000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 15.612000] Initializing USB Mass Storage driver...
[ 15.616000] usbcore: registered new interface driver usb-storage
[ 15.624000] USB Mass Storage support registered.
[ 20.524000] device eth0 entered promiscuous mode
[ 20.528000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 20.540000] br-lan: port 1(eth0) entered forwarding state
[ 20.544000] br-lan: port 1(eth0) entered forwarding state
[ 22.548000] br-lan: port 1(eth0) entered forwarding state
[ 34.272000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 34.288000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 34.292000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 123.468000] JFFS2 notice: (909) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of .
[/spoiler]
configuro tal cual comentas y:
wifi
PHY for wifi device radio0 not found
PHY for wifi device radio0 not found
idem para un network restart.
/etc/config/wireless tiene lo siguiente:Código: [Seleccionar]config wifi-device radio0
option type mac80211
option channel 11
option macaddr 00:00:00:00:00:00
option hwmode 11g
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
option device radio0
option network lan
option mode ap
option ssid OpenWrt
option encryption none
Saludos.buenas,
la detecta pero al configurarla no encuentra el interface radio0
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC2
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: 65.52.48-48.49
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29416k/32768k available (2219k kernel code, 3352k reserved, 396k data, 196k init,)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.284000] bio: create slab <bio-0> at 0
[ 0.288000] PCI host bridge to bus 0000:00
[ 0.292000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.296000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.300000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.304000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.308000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.312000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.316000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.320000] Switching to clocksource MIPS
[ 0.328000] NET: Registered protocol family 2
[ 0.332000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.340000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.348000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.356000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.360000] TCP reno registered
[ 0.364000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.372000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.376000] NET: Registered protocol family 1
[ 0.384000] audit: initializing netlink socket (disabled)
[ 0.392000] type=2000 audit(0.392:1): initialized
[ 0.396000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.404000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat,.
[ 0.412000] msgmni has been set to 57
[ 0.416000] io scheduler noop registered
[ 0.420000] io scheduler deadline registered (default)
�[ 0.436000] console [ttyS0] enabled, bootconsole disabled= 36) is a bcm63xx_uart
[ 0.436000] console [ttyS0] enabled, bootconsole disabled
[ 0.456000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.460000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.468000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.476000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.480000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.488000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.496000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.504000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.512000] bcm63xxpart: Spare partition is offset 260004 and length d8fffc
[ 0.516000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.524000] Creating 5 MTD partitions on "spi0.0":
[ 0.528000] 0x000000000000-0x000000010000 : "CFE"
[ 0.536000] 0x000000010100-0x000000100000 : "kernel"
[ 0.540000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller thy
[ 0.556000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.564000] mtd: partition "rootfs" set to be root filesystem
[ 0.572000] mtd: partition "rootfs_data" created automatically, ofs=260000, len=D90000
[ 0.580000] 0x000000260000-0x000000ff0000 : "rootfs_data"
[ 0.588000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.596000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.640000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.652000] TCP westwood registered
[ 0.656000] NET: Registered protocol family 17
[ 0.660000] 8021q: 802.1Q VLAN Support v1.8
[ 0.676000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.684000] Freeing unused kernel memory: 196k freed
awk: /proc/cpuinfo: No such file or directory
[ 3.176000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.388000] roboswitch: Probing device eth0:
[ 3.392000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.400000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.408000] roboswitch: Probing device eth1: No such device
[ 3.412000] roboswitch: Probing device eth2: No such device
[ 3.420000] roboswitch: Probing device eth3: No such device
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -
Please press Enter to activate this console. [ 10.820000] Compat-wireless backport release: compat-wir7
[ 10.824000] Backport based on wireless-testing.git master-2012-05-29
[ 10.832000] compat.git: wireless-testing.git
[ 10.888000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.892000] cfg80211: World regulatory domain updated:
[ 10.900000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.908000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.916000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.924000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.932000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.940000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.204000] There is already a switch registered on the device 'eth0'
[ 11.208000] roboswitch: Probing device eth1: No such device
[ 11.216000] roboswitch: Probing device eth2: No such device
[ 11.220000] roboswitch: Probing device eth3: No such device
[ 11.600000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 11.604000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 11.612000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 11.620000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 11.628000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 11.708000] bcma: Failed to get SPROM: -71
[ 11.712000] bcma: Bus registered
[ 12.000000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 12.004000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 12.044000] Button Hotplug driver version 0.4.1
[ 12.248000] PPP generic driver version 2.4.2
[ 12.788000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.976000] NET: Registered protocol family 24
[ 13.032000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 18.352000] device eth0 entered promiscuous mode
[ 18.356000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 18.364000] br-lan: port 1(eth0) entered forwarding state
[ 18.372000] br-lan: port 1(eth0) entered forwarding state
[ 20.376000] br-lan: port 1(eth0) entered forwarding state
[/spoiler]hola,
Ví tu correo en el hilo del comtrend y ya me sonó el tema :-)
claramente es el problema de este router. En el firmware original tenemos lo siguiente:
00:09.0 Class 0c03: 14e4:6300
00:0a.0 Class 0c03: 14e4:6300
01:00.0 Class 0604: 14e4:6328
02:00.0 Class 0280: 14e4:a8d8
en OpenWrt:
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.304000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.304000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.304000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.304000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.304000] pci 0000:01:00.0: supports D1 D2
[ 0.304000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.308000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.312000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.316000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.320000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Claramente no detecta ni el USB 14e4:6300 ni el WIFI 14e4:a8d8 (no he encontrado el modelo de chipset broadcom al que corresponde aún)
Luego aplico tu parche a ver si el WIFI está soportado (en el fw original emplea el wl propietario)
Saludos!Puedo mirar lo del Wifi, pero necesito que me facilitéis el dmesg del router con el firmware original.
Un "cat /proc/bus/pci/devices" del firmware original tampoco vendría mal ;).
Saludos!
Aquí lo tienes.
https://dl.dropbox.com/u/4708147/openwrt/63281T/62381T_wlan.patch
Si puedes pon un log de arranque completo y un "cat /proc/bus/pci/devices".
Saludos!
Prueba mi compilación porfa: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe.bin
Saludos!
Puedes ponerme el log completo de la detección errónea que comentas?
Además te recuerdo que primero tienes que editar /etc/config/wireless y borrar la línea de la interfaz radio0 que pone "option disabled 1". Igual el problema viene de ahí.
1) vi /etc/config/wireless
2) Si te sitúas con el puntero en una línea concreta y presionas dos veces la tecla 'd' se borra la línea. Borras la línea de la interfaz que pone option disabled 1.
3) Guardas el fichero (Escape->:wq->Enter).
4) /etc/init.d/network restart. Copia el log que devuelve este comando.
Saludos!
[ 11.708000] bcma: Failed to get SPROM: -71
Aqui hay otro esperando jajajajja.
Como ya comento gmtii esta en manos de kanjimonster, lo que podriamos hacer es crear un post o contactar varios con kanjimonster haver si entre todos hacemos un poquito de presion y se mira el tema..
Creo que gmtii ha echo todo el trabajo sucio, lo mismo es algo que se nos pasa por alto y se soluciona facilmente.
Como podemos contactar con kanjimonster?
un salu2
[ 13.192000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 13.544000] ieee80211 phy0: wl0: brcms_b_attach: Unsupported Broadcom board type (0xa8d8) or revision)
[ 13.556000] ieee80211 phy0: wl0: brcms_b_attach: failed with err 15
[ 13.564000] ieee80211 phy0: wl0: brcms_c_attach: failed with err 15
[ 13.568000] ieee80211 phy0: brcmsmac: attach() failed with code 15
[ 13.576000] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[ 0.400000] bcma: SPROM offset 0x800
[ 0.440000] bcma: Failed to get SPROM: -71
A ver si cuando tengáis un rato podéis probar esta versión de firmware y me ponéis el log de arranque.
He intentado hacer que el wifi funcione con el b43 en vez de con bcma.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_b43.bin
Saludos!
Estoy probando varias cosas con el wifi, cuando consiga algo os lo comento.
A parte de eso, podrías poner los colores de cada LED para enviar los parches para que añadan el soporte para esta placa?
963281T_TEF::internet > ?
963281T_TEF::power > ?
963281T_TEF::internet-fail > ?
963281T_TEF::power-fail > ?
963281T_TEF::wps > ?
963281T_TEF::dsl > ?
Más preguntas:
¿Este router no tiene ningún botón?
¿Seguro que todos los LEDs son active_low?
¿Los puertos ethernet funcionan TODOS?
Saludos!
El parche tendrá un punto conflictivo con la detección del CFE. Kanji dijo que iba a buscar una solución, pero vamos, como que anda desbordado el hombre...1) ¿Los GPIO de los LEDs los has sacado tú, o los has sacado del GPL?
Los LED; busco los GPIO de los botones:
ADSL GREEN on gpio .............. 03
ADSL RED on gpio ........... 05
Wireless GREEN on gpio .......... 09
Wireless RED led on gpio ........ 10
Remote Service GREEN on gpio .... 06
Remote Service RED led on gpio .. 07
ETH GREEN on gpio ............... 31
ETH Fail RED on gpio ............ 20
Wan data GREEN on gpio .......... 11
Wan data RED on gpio ............ 02
Power ON GREEN on gpio ......... 04
STOP CFE RED on gpio ........... 08
VOIP1 led on gpio ................ 06
Respecto al brcm80211, no veo ni una sola referencia a PCIe comparado con el código en linux x86... mucho me temo que no haya soporte en todo el OpenWrt para este bus?
Saludos.Estoy probando varias cosas con el wifi, cuando consiga algo os lo comento.
A parte de eso, podrías poner los colores de cada LED para enviar los parches para que añadan el soporte para esta placa?
963281T_TEF::internet > ?
963281T_TEF::power > ?
963281T_TEF::internet-fail > ?
963281T_TEF::power-fail > ?
963281T_TEF::wps > ?
963281T_TEF::dsl > ?
Más preguntas:
¿Este router no tiene ningún botón?
¿Seguro que todos los LEDs son active_low?
¿Los puertos ethernet funcionan TODOS?
Saludos!
if (!memcmp(cfe, "cfe-v", 5))
snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+ else if (!memcmp(cfe, "cfe-", 4)) {
+ for(i = 0; i < 0x10; i++) {
+ cfe_version[i] = cfe[4 + i];
+ }
+ cfe_version[i] = 0;
+ }
else
strcpy(cfe_version, "unknown");
printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
4) No hay menciones específicas a PCIe porque se implementa a nivel bajo. A nivel superior el driver es transparente y no se distingue entre PCI/PCIe.Index: target/linux/brcm63xx/image/Makefile
===================================================================
--- target/linux/brcm63xx/image/Makefile (revisión: 32481)
+++ target/linux/brcm63xx/image/Makefile (copia de trabajo)
@@ -151,6 +151,7 @@
$(call Image/Build/CFE,$(1),963281TAN,6328,963481TAN-4M-flash-generic,,--pad 2)
$(call Image/Build/CFE,$(1),963281TAN,6328,963481TAN-8M-flash-generic,,--pad 4)
$(call Image/Build/CFE,$(1),963281TAN,6328,963481TAN-16M-flash-generic,,--pad 8)
+ $(call Image/Build/CFE,$(1),963281T_TEF,6328,963281T_TEF-generic,,--pad 8)
$(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
$(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
$(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
Index: target/linux/brcm63xx/patches-3.3/554-board-963281T_TEF.patch
===================================================================
--- target/linux/brcm63xx/patches-3.3/554-board-963281T_TEF.patch (revisión: 0)
+++ target/linux/brcm63xx/patches-3.3/554-board-963281T_TEF.patch (revisión: 0)
@@ -0,0 +1,87 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -298,6 +298,76 @@ static struct board_info __initdata boar
+ },
+ },
+ };
++
++static struct board_info __initdata board_963281T_TEF = {
++ .name = "963281T_TEF",
++ .expected_cpu_id = 0x6328,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .has_enetsw = 1,
++
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .leds = {
++ {
++ .name = "963281T_TEF::internet",
++ .gpio = 1,
++ .active_low = 1,
++ },
++ {
++ .name = "963281T_TEF::power",
++ .gpio = 4,
++ .active_low = 1,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "963281T_TEF::internet-fail",
++ .gpio = 7,
++ .active_low = 1,
++ },
++ {
++ .name = "963281T_TEF::power-fail",
++ .gpio = 8,
++ .active_low = 1,
++ },
++ {
++ .name = "963281T_TEF::wps",
++ .gpio = 9,
++ .active_low = 1,
++ },
++ {
++ .name = "963281T_TEF::dsl",
++ .gpio = 11,
++ .active_low = 1,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -2576,6 +2646,7 @@ static const struct board_info __initdat
+ &board_96328avng,
+ &board_963281TAN,
+ &board_dsl_274xb_f1,
++ &board_963281T_TEF,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ &board_96338gw,
Index: target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
===================================================================
--- target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch (revisión: 32481)
+++ target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch (copia de trabajo)
@@ -8,7 +8,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/spi/74x164.h>
-@@ -2652,7 +2653,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2723,7 +2724,7 @@ static void __init nb4_nvram_fixup(void)
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
-@@ -2672,6 +2673,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2743,6 +2744,7 @@ static struct ssb_sprom bcm63xx_sprom =
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
Index: target/linux/brcm63xx/patches-3.3/802-cfe_version_mod.patch
===================================================================
--- target/linux/brcm63xx/patches-3.3/802-cfe_version_mod.patch (revisión: 0)
+++ target/linux/brcm63xx/patches-3.3/802-cfe_version_mod.patch (revisión: 0)
@@ -0,0 +1,30 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2833,6 +2833,12 @@ void __init board_prom_init(void)
+ if (!memcmp(cfe, "cfe-v", 5))
+ snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+ cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
++ else if (!memcmp(cfe, "cfe-", 4)) {
++ for(i = 0; i < 0x10; i++) {
++ cfe_version[i] = cfe[4 + i];
++ }
++ cfe_version[i] = 0;
++ }
+ else
+ strcpy(cfe_version, "unknown");
+ printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -55,10 +55,10 @@ static int bcm63xx_detect_cfe(struct mtd
+ if (ret)
+ return ret;
+
+- if (strncmp("cfe-v", buf, 5) == 0)
++ if (strncmp("cfe-", buf, 4) == 0)
+ return 0;
+
+- /* very old CFE's do not have the cfe-v string, so check for magic */
++ /* very old CFE's do not have the cfe- string, so check for magic */
+ ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
+ (void *)buf);
+ buf[retlen] = 0;
Cambios de propiedades en target/linux/brcm63xx/patches-3.3/802-cfe_version_mod.patch
___________________________________________________________________
Añadido: svn:executable
+ *
Index: target/linux/brcm63xx/patches-3.3/800-wl_exports.patch
===================================================================
--- target/linux/brcm63xx/patches-3.3/800-wl_exports.patch (revisión: 32481)
+++ target/linux/brcm63xx/patches-3.3/800-wl_exports.patch (copia de trabajo)
@@ -24,7 +24,7 @@
if (nvram.version <= 4)
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
-@@ -57,6 +57,7 @@ void (*_dma_cache_wback)(unsigned long s
+@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
Index: target/linux/brcm63xx/base-files/lib/brcm63xx.sh
===================================================================
--- target/linux/brcm63xx/base-files/lib/brcm63xx.sh (revisión: 32481)
+++ target/linux/brcm63xx/base-files/lib/brcm63xx.sh (copia de trabajo)
@@ -26,6 +26,10 @@
status_led="963281TAN::power"
ifname=eth0
;;
+ 963281T_TEF)
+ status_led="963281T_TEF::power"
+ ifname=eth0
+ ;;
96348GW)
status_led="power"
brcm63xx_has_reset_button="true"
Index: target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh
===================================================================
--- target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh (revisión: 32481)
+++ target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh (copia de trabajo)
@@ -15,6 +15,7 @@
case "$board_name" in
96328avng |\
963281TAN |\
+ 963281T_TEF |\
"CPVA502+" |\
AW4339U |\
CPVA642 |\
Index: target/linux/brcm63xx/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/brcm63xx/base-files/etc/uci-defaults/network (revisión: 32481)
+++ target/linux/brcm63xx/base-files/etc/uci-defaults/network (copia de trabajo)
@@ -16,6 +16,7 @@
96328avng |\
963281TAN |\
+963281T_TEF |\
96348A-122 |\
96358-502V |\
AW4339U |\
+ .leds = {
+ {
+ .name = "963281T_TEF::internet",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF::power",
+ .gpio = 4,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "963281T_TEF::internet-fail",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF::power-fail",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF::wps",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF::dsl",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
ok, ahora ví el parche bien y si que lo tienes resuelto.Vale, es la primera vez que oigo algo de esa función xD.
El propio CFE tiene un comando test leds. Miraré los gpio de los botones este fin de semana... No completé la definición de leds excepto el de power y lo dejé como tarea pendiente...
Alguna idea por qué el 14e4:6300 del ehci no se detecta en openwrt entonces? Tampoco el driver brcm80211 que soportaría el modo n de la 43224 tiene referencia alguna a pcie frente al driver x86 sin embargo...
Saludos.
echo 1 > /sys/class/leds/963281T_TEF\:green\:power/brightness
1-B) Apagar LED de Power:echo 0 > /sys/class/leds/963281T_TEF\:green\:power/brightness
echo 1 > /sys/class/leds/963281T_TEF\:red\:stop/brightness
2-B) Apagar LED de Stop:echo 0 > /sys/class/leds/963281T_TEF\:red\:stop/brightness
echo 1 > /sys/class/leds/963281T_TEF\:green\:inet/brightness
3-B) Apagar LED de Internet (WAN):echo 0 > /sys/class/leds/963281T_TEF\:green\:inet/brightness
echo 1 > /sys/class/leds/963281T_TEF\:red\:inet-fail/brightness
4-B) Apagar LED de Internet-Fail (WAN-Fail):echo 0 > /sys/class/leds/963281T_TEF\:red\:inet-fail/brightness
echo 1 > /sys/class/leds/963281T_TEF\:green\:ppp/brightness
5-B) Apagar LED de ppp (ADSL):echo 0 > /sys/class/leds/963281T_TEF\:green\:ppp/brightness
echo 1 > /sys/class/leds/963281T_TEF\:red\:ppp-fail/brightness
6-B) Apagar LED de ppp-fail (ADSL-Fail):echo 0 > /sys/class/leds/963281T_TEF\:red\:ppp-fail/brightness
echo 1 > /sys/class/leds/963281T_TEF\:green\:3g/brightness
7-B) Apagar LED de 3g:echo 0 > /sys/class/leds/963281T_TEF\:green\:3g/brightness
echo 1 > /sys/class/leds/963281T_TEF\:red\:3g-fail/brightness
8-B) Apagar LED de 3g:echo 0 > /sys/class/leds/963281T_TEF\:red\:3g-fail/brightness
echo 1 > /sys/class/leds/963281T_TEF\:green\:wlan/brightness
9-B) Apagar LED del Wifi:echo 0 > /sys/class/leds/963281T_TEF\:green\:wlan/brightness
echo 1 > /sys/class/leds/963281T_TEF\:red\:wlan-fail/brightness
10-B) Apagar LED del Wifi-fail:echo 0 > /sys/class/leds/963281T_TEF\:red\:wlan-fail/brightness
echo 1 > /sys/class/leds/963281T_TEF\:green\:eth/brightness
11-B) Apagar LED del Ethernet:echo 0 > /sys/class/leds/963281T_TEF\:green\:eth/brightness
echo 1 > /sys/class/leds/963281T_TEF\:red\:eth-fail/brightness
12-B) Apagar LED del Ethernet-fail:echo 0 > /sys/class/leds/963281T_TEF\:red\:eth-fail/brightness
echo 30 > /sys/class/gpio/export
cat /sys/class/gpio/gpio30/value
Si el comando cat /sys/class/gpio/gpio30/value devuelve 1 es que el botón es active low.Como ya he comentado, voy a estar liado una temporada, así que de momento me va a ser imposible probar nada más :'(No hay problema, yo lo he puesto para que quien tenga este router y lo pueda probar lo haga ;).
Enviado desde mi u8500 usando Tapatalk 2
root@OpenWrt:/etc/config# ifup wan
PHY for wifi device radio0 not found
PHY for wifi device radio0 not found
Vale, volviendo a las pruebas del Wifi, he compilado un firmware en el que intento registrar la SPROM por BCMA.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_wlan.bin
Ya sabéis, necesito el bootlog ;).
Saludos!
Esta mañana, justo antes de salir de viaje, he visto el nuevo firm. Sólo he tenido tiempo de instalarlo y ver que el wifi ya funciona ;D
Lo he activado y he hecho un scan de redes sin ningún problema ;D
Esto empieza a 'pitar'. A ver si alguien puede ayudarte con el tema de los botones y leds ;)
Enviado desde mi u8500 usando Tapatalk 2
hmmm, a mi no me funciona.. por ejemplo, en modo clente:Código: [Seleccionar]root@OpenWrt:/etc/config# ifup wan
PHY for wifi device radio0 not found
PHY for wifi device radio0 not found
[spoiler][ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC2
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2239k kernel code, 3384k reserved, 400k data, 200k init,)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.284000] bio: create slab <bio-0> at 0
[ 0.288000] PCI host bridge to bus 0000:00
[ 0.292000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.296000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.300000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.300000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.300000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.300000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.300000] pci 0000:01:00.0: supports D1 D2
[ 0.300000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.304000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.308000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.312000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.316000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.320000] Switching to clocksource MIPS
[ 0.328000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.336000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.340000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.348000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.360000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.436000] bcma: Failed to get SPROM: -71
[ 0.440000] bcma: Bus registered
[ 0.444000] NET: Registered protocol family 2
[ 0.448000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.456000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.464000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.476000] TCP reno registered
[ 0.480000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.484000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] NET: Registered protocol family 1
[ 0.496000] PCI: CLS 0 bytes, default 16
[ 0.500000] audit: initializing netlink socket (disabled)
[ 0.504000] type=2000 audit(0.504:1): initialized
[ 0.512000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.516000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat,.
[ 0.528000] msgmni has been set to 57
[ 0.532000] io scheduler noop registered
[ 0.536000] io scheduler deadline registered (default)
[ 0.544000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.552000] console [ttyS0] enabled, bootconsole disabled
[ 0.568000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.576000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.580000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.588000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.596000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.604000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.612000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.616000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.624000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.632000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.640000] Creating 5 MTD partitions on "spi0.0":
[ 0.644000] 0x000000000000-0x000000010000 : "CFE"
[ 0.652000] 0x000000010100-0x000000100000 : "kernel"
[ 0.656000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller thy
[ 0.672000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.680000] mtd: partition "rootfs" set to be root filesystem
[ 0.684000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.692000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.700000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.708000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.752000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.760000] Registered led device: 963281T_TEF:green:power
[ 0.760000] Registered led device: 963281T_TEF:red:stop
[ 0.760000] Registered led device: 963281T_TEF:green:inet
[ 0.760000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.764000] Registered led device: 963281T_TEF:green:ppp
[ 0.764000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.764000] Registered led device: 963281T_TEF:green:3g
[ 0.764000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.764000] Registered led device: 963281T_TEF:green:wlan
[ 0.764000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.764000] Registered led device: 963281T_TEF:green:eth
[ 0.768000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.768000] TCP westwood registered
[ 0.772000] NET: Registered protocol family 17
[ 0.776000] 8021q: 802.1Q VLAN Support v1.8
[ 0.788000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.796000] Freeing unused kernel memory: 200k freed
[ 3.352000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.408000] roboswitch: Probing device eth0:
[ 3.412000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.420000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.428000] roboswitch: Probing device eth1: No such device
[ 3.436000] roboswitch: Probing device eth2: No such device
[ 3.440000] roboswitch: Probing device eth3: No such device
[ 11.976000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 11.984000] Backport based on wireless-testing.git master-2012-06-14
[ 11.988000] compat.git: wireless-testing.git
[ 12.044000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.048000] cfg80211: World regulatory domain updated:
[ 12.056000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.064000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.072000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.080000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.088000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.096000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.632000] NET: Registered protocol family 10
[ 12.696000] There is already a switch registered on the device 'eth0'
[ 12.704000] roboswitch: Probing device eth1: No such device
[ 12.708000] roboswitch: Probing device eth2: No such device
[ 12.716000] roboswitch: Probing device eth3: No such device
[ 13.092000] bcma: exports duplicate symbol bcma_core_dma_translation (owned by kernel)
[ 13.380000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 13.388000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 13.424000] Button Hotplug driver version 0.4.1
[ 13.760000] PPP generic driver version 2.4.2
[ 14.084000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.280000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.484000] NET: Registered protocol family 24
[ 14.516000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.892000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.976000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 21.000000] device eth0 entered promiscuous mode
[ 21.008000] br-lan: port 1(eth0) entered forwarding state
[ 21.012000] br-lan: port 1(eth0) entered forwarding state
[ 23.016000] br-lan: port 1(eth0) entered forwarding state
[ 31.232000] eth0: no IPv6 routers present
[ 39.052000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 39.068000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 39.072000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 124.720000] JFFS2 notice: (1019) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of.
[/spoiler]
[ 21.000000] device eth0 entered promiscuous mode
[ 21.008000] br-lan: port 1(eth0) entered forwarding state
[ 21.012000] br-lan: port 1(eth0) entered forwarding state
[ 23.016000] br-lan: port 1(eth0) entered forwarding state
[ 31.232000] eth0: no IPv6 routers present
[ 39.052000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 39.068000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 39.072000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
Puedes poner la modificación que has hecho?Aquí tienes todos los cambios (svn diff):
Enviado desde mi Nexus One usando Tapatalk 2
No llegaré a casa hasta mañana, así que ...Da igual que no tengas cable serial. Pero si vas a mandar el bootlog haciendo dmesg. Lo normal es que el principio del dmesg se pierda, y el problema es que es lo que nos interesa.
De todas formas, yo no tengo cable serial (lo hago todo conectado por ethernet), así que no puedo mandar el bootlog, a lo sumo el dmseg :-\
Ah, y yo el scan de redes lo he hecho desde LuCi ;)
Si tenéis un rato, probad este otro firmware y postead el bootlog.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_wlan_debug.bin
Y cuando podáis, haced lo de los LEDs y los botones, que solo os lleva un rato y con eso ya se puede enviar el parche a openwrt.
Saludos.
buenas,Ok, por lo que parece el SPROM sigue sin registrarse correctamente.
te confirmo que vía luci hizo un scan de redes wifi disponibles, pero no hay forma de configurar el interface en modo ap o sta...
ahí va el bootlog
[spoiler][ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Jun 23 13:55:19 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2239k kernel code, 3384k reserved, 400k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.056000] [DEBUG] Trying to register SSB SPROM.
[ 0.060000] [DEBUG] Trying to register BCMA SPROM.
[ 0.284000] registering PCI controller with io_map_base unset
[ 0.292000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.356000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.364000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.444000] bcma: Failed to get SPROM: -71
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.620000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.768000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP westwood registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.804000] Freeing unused kernel memory: 200k freed
[ 3.392000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.444000] roboswitch: Probing device eth0:
[ 3.448000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.460000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.464000] roboswitch: Probing device eth1: No such device
[ 3.472000] roboswitch: Probing device eth2: No such device
[ 3.476000] roboswitch: Probing device eth3: No such device
[ 12.088000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.092000] Backport based on wireless-testing.git master-2012-06-14
[ 12.100000] compat.git: wireless-testing.git
[ 12.156000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.160000] cfg80211: World regulatory domain updated:
[ 12.168000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.176000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.184000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.192000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.200000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.208000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.596000] NET: Registered protocol family 10
[ 12.660000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.672000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 13.308000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 13.316000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 13.352000] Button Hotplug driver version 0.4.1
[ 13.672000] PPP generic driver version 2.4.2
[ 14.076000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.088000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.400000] NET: Registered protocol family 24
[ 14.436000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.804000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.732000] device eth0 entered promiscuous mode
[ 20.740000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 20.748000] br-lan: port 1(eth0) entered forwarding state
[ 20.752000] br-lan: port 1(eth0) entered forwarding state
[ 22.756000] br-lan: port 1(eth0) entered forwarding state
[ 31.064000] eth0: no IPv6 routers present
[ 38.972000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 38.988000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 38.992000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 127.256000] JFFS2 notice: (1018) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 146.580000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 146.684000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 149.020000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 149.128000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 151.412000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 151.516000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 160.056000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 160.160000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 208.864000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 208.968000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready[/spoiler]Si tenéis un rato, probad este otro firmware y postead el bootlog.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_wlan_debug.bin
Y cuando podáis, haced lo de los LEDs y los botones, que solo os lleva un rato y con eso ya se puede enviar el parche a openwrt.
Saludos.
6-A) Encender LED de ppp-fail (ADSL-Fail):
Código:
echo 1 > /sys/class/leds/963281T_TEF\:red\:ppp-fail/brightness
6-B) Apagar LED de ppp-fail (ADSL-Fail):
Código:
echo 0 > /sys/class/leds/963281T_TEF\:red\:ppp-fail/brightness
10-A) Encender LED del Wifi-fail:
Código:
echo 1 > /sys/class/leds/963281T_TEF\:red\:wlan-fail/brightness
10-B) Apagar LED del Wifi-fail:
Código:
echo 0 > /sys/class/leds/963281T_TEF\:red\:wlan-fail/brightness
12-A) Encender LED del Ethernet-fail:
Código:
echo 1 > /sys/class/leds/963281T_TEF\:red\:eth-fail/brightness
12-B) Apagar LED del Ethernet-fail:
Código:
echo 0 > /sys/class/leds/963281T_TEF\:red\:eth-fail/brightness
root@OpenWrt:~# echo 24 > /sys/class/gpio/export
root@OpenWrt:~# cat /sys/class/gpio/gpio24/value
1
root@OpenWrt:~# cat /sys/class/gpio/gpio24/value
0
root@OpenWrt:~#
root@OpenWrt:~# echo 23 > /sys/class/gpio/export
root@OpenWrt:~# cat /sys/class/gpio/gpio23/value
1
root@OpenWrt:~# cat /sys/class/gpio/gpio23/value
0
root@OpenWrt:~#
Nuevo firmware instalado.Esos 6 comandos (equivalentes a 3 LEDs) no funcionan o funcionan pero al revés?
LED's.
Excepto estos 6, los demas funcionan correctamente.Citar6-A) Encender LED de ppp-fail (ADSL-Fail):
Código:
echo 1 > /sys/class/leds/963281T_TEF\:red\:ppp-fail/brightness
6-B) Apagar LED de ppp-fail (ADSL-Fail):
Código:
echo 0 > /sys/class/leds/963281T_TEF\:red\:ppp-fail/brightness
10-A) Encender LED del Wifi-fail:
Código:
echo 1 > /sys/class/leds/963281T_TEF\:red\:wlan-fail/brightness
10-B) Apagar LED del Wifi-fail:
Código:
echo 0 > /sys/class/leds/963281T_TEF\:red\:wlan-fail/brightness
12-A) Encender LED del Ethernet-fail:
Código:
echo 1 > /sys/class/leds/963281T_TEF\:red\:eth-fail/brightness
12-B) Apagar LED del Ethernet-fail:
Código:
echo 0 > /sys/class/leds/963281T_TEF\:red\:eth-fail/brightness
Botón Wifi:Citarroot@OpenWrt:~# echo 24 > /sys/class/gpio/export
root@OpenWrt:~# cat /sys/class/gpio/gpio24/value
1
root@OpenWrt:~# cat /sys/class/gpio/gpio24/value
0
root@OpenWrt:~#
Botón reset:Citarroot@OpenWrt:~# echo 23 > /sys/class/gpio/export
root@OpenWrt:~# cat /sys/class/gpio/gpio23/value
1
root@OpenWrt:~# cat /sys/class/gpio/gpio23/value
0
root@OpenWrt:~#
Puf, vaya paliza con el botón del reset ;D
Con el pulsador de Power (on/off) no hay que hacer nada, no ?
Voy a preparar las cosas, y me voy a la playa con los 'enanos' >:(
Ah, sí me olvidaba ...
dmesg
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Jun 23 13:55:19 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2239k kernel code, 3384k reserved, 400k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.056000] [DEBUG] Trying to register SSB SPROM.
[ 0.060000] [DEBUG] Trying to register BCMA SPROM.
[ 0.284000] registering PCI controller with io_map_base unset
[ 0.292000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.356000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.444000] bcma: Failed to get SPROM: -71
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.620000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.768000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP westwood registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.804000] Freeing unused kernel memory: 200k freed
[ 3.392000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.400000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.452000] roboswitch: Probing device eth0:
[ 3.460000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.468000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.476000] roboswitch: Probing device eth1: No such device
[ 3.480000] roboswitch: Probing device eth2: No such device
[ 3.484000] roboswitch: Probing device eth3: No such device
[ 9.444000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[ 9.452000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 9.460000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 101.972000] JFFS2 notice: (333) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 105.256000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 105.264000] Backport based on wireless-testing.git master-2012-06-14
[ 105.272000] compat.git: wireless-testing.git
[ 105.328000] cfg80211: Calling CRDA to update world regulatory domain
[ 105.332000] cfg80211: World regulatory domain updated:
[ 105.340000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 105.348000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 105.356000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 105.364000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 105.372000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 105.380000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 105.768000] NET: Registered protocol family 10
[ 105.832000] There is already a switch registered on the device 'eth0'
[ 105.840000] roboswitch: Probing device eth1: No such device
[ 105.844000] roboswitch: Probing device eth2: No such device
[ 105.852000] roboswitch: Probing device eth3: No such device
[ 106.484000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 106.488000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 106.524000] Button Hotplug driver version 0.4.1
[ 106.844000] PPP generic driver version 2.4.2
[ 107.216000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 107.424000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 107.568000] NET: Registered protocol family 24
[ 107.604000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 107.976000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 112.484000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 112.492000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 112.504000] device eth0 entered promiscuous mode
[ 112.512000] br-lan: port 1(eth0) entered forwarding state
[ 112.516000] br-lan: port 1(eth0) entered forwarding state
[ 114.520000] br-lan: port 1(eth0) entered forwarding state
[ 123.216000] eth0: no IPv6 routers present
[/spoiler]
Esos 6 comandos (equivalentes a 3 LEDs) no funcionan o funcionan pero al revés?
Lo dudo mucho :P. Me estoy limitando a poner "Debugs" y a alterar pequeñas partes del código para ver qué sucede exactamente.CitarEsos 6 comandos (equivalentes a 3 LEDs) no funcionan o funcionan pero al revés?
No hacen nada.
Cuando pueda, instalo el nuevo firm y compruebo lo de los leds ... y a ver si por fin la wifi quiere funcionar correctamente ;D
[ 497.792000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 497.896000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 500.136000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 500.240000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 502.496000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 502.600000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 508.896000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 509.000000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 525.136000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 525.240000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
Instalado el nuevo firm, los 6 leds siguen sin funcionar ???Te toca repetir estos comandos para los GPIOs restantes, para encontrar los LEDs de: ADSL-Fail, Wifi-fail y Ethernet-fail.
Aquí el dmesg
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #4 Mon Jun 25 11:34:01 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 400k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.056000] [DEBUG] Trying to register BCMA SPROM.
[ 0.280000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.292000] PCI host bridge to bus 0000:00
[ 0.296000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.300000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.304000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.304000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.304000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.304000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.304000] pci 0000:01:00.0: supports D1 D2
[ 0.304000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.308000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.312000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.316000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.320000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.324000] Switching to clocksource MIPS
[ 0.332000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.340000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.344000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.352000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.360000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.400000] [DEBUG] BCMA_SPROM_GET S1.
[ 0.400000] [DEBUG] BCMA_SPROM_GET S2.
[ 0.444000] bcma: Failed to get SPROM: -71
[ 0.452000] bcma: Bus registered
[ 0.456000] NET: Registered protocol family 2
[ 0.460000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.488000] TCP reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.496000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.508000] PCI: CLS 0 bytes, default 16
[ 0.512000] audit: initializing netlink socket (disabled)
[ 0.516000] type=2000 audit(0.516:1): initialized
[ 0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.528000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.540000] msgmni has been set to 57
[ 0.544000] io scheduler noop registered
[ 0.548000] io scheduler deadline registered (default)
[ 0.556000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.564000] console [ttyS0] enabled, bootconsole disabled
[ 0.580000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.588000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.592000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.600000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.608000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.616000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.620000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.628000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.636000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.644000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.648000] Creating 5 MTD partitions on "spi0.0":
[ 0.656000] 0x000000000000-0x000000010000 : "CFE"
[ 0.664000] 0x000000010100-0x000000100000 : "kernel"
[ 0.668000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.684000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.692000] mtd: partition "rootfs" set to be root filesystem
[ 0.696000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.704000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.712000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.720000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.772000] Registered led device: 963281T_TEF:green:power
[ 0.772000] Registered led device: 963281T_TEF:red:stop
[ 0.772000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.776000] Registered led device: 963281T_TEF:green:ppp
[ 0.776000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.776000] Registered led device: 963281T_TEF:green:3g
[ 0.776000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.776000] Registered led device: 963281T_TEF:green:wlan
[ 0.776000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.780000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.780000] TCP westwood registered
[ 0.784000] NET: Registered protocol family 17
[ 0.788000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.396000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.452000] roboswitch: Probing device eth0:
[ 3.456000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.464000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.472000] roboswitch: Probing device eth1: No such device
[ 3.476000] roboswitch: Probing device eth2: No such device
[ 3.480000] roboswitch: Probing device eth3: No such device
[ 9.436000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[ 9.444000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 9.448000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 101.636000] JFFS2 notice: (335) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 104.920000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 104.924000] Backport based on wireless-testing.git master-2012-06-14
[ 104.932000] compat.git: wireless-testing.git
[ 104.992000] cfg80211: Calling CRDA to update world regulatory domain
[ 104.996000] cfg80211: World regulatory domain updated:
[ 105.004000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 105.012000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 105.020000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 105.028000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 105.036000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 105.044000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 105.432000] NET: Registered protocol family 10
[ 105.496000] There is already a switch registered on the device 'eth0'
[ 105.504000] roboswitch: Probing device eth1: No such device
[ 105.508000] roboswitch: Probing device eth2: No such device
[ 105.516000] roboswitch: Probing device eth3: No such device
[ 106.152000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 106.156000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 106.192000] Button Hotplug driver version 0.4.1
[ 106.512000] PPP generic driver version 2.4.2
[ 106.884000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 107.088000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 107.236000] NET: Registered protocol family 24
[ 107.272000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 107.644000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 107.932000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 112.084000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 112.092000] device eth0 entered promiscuous mode
[ 112.100000] br-lan: port 1(eth0) entered forwarding state
[ 112.104000] br-lan: port 1(eth0) entered forwarding state
[ 114.108000] br-lan: port 1(eth0) entered forwarding state
[ 122.920000] eth0: no IPv6 routers present
[/spoiler]
Al intentar configurar el wifi en modo cliente, suelta una serie de errores. A ver si te dan alguna pista ...Citar[ 497.792000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 497.896000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 500.136000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 500.240000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 502.496000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 502.600000] ADDRCONF(NETDEV_UP): tmp.wlan0: link is not ready
[ 508.896000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 509.000000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 525.136000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 525.240000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
#Exportar el GPIO N.
echo N > /sys/class/gpio/export
#Cambiar la dirección a salida.
echo out > /sys/class/gpio/gpioN/direction
#Si el LED es active_low, lo encenderá, si el LED es active_high lo apagará
echo 0 > /sys/class/gpio/gpioN/value
#Si el LED es active_low, lo apagará, si el LED es active_high lo encenderá
echo 1 > /sys/class/gpio/gpioN/value
root@OpenWrt:~# echo 11 > /sys/class/gpio/export
ash: write error: Device or resource busy
root@OpenWrt:~# echo 12 > /sys/class/gpio/export
root@OpenWrt:~# echo out > /sys/class/gpio/gpio12/direction
root@OpenWrt:~# echo 0 > /sys/class/gpio/gpio12/value
root@OpenWrt:~# echo 1 > /sys/class/gpio/gpio12/value
root@OpenWrt:~# echo 0 > /sys/class/gpio/gpio12/value
root@OpenWrt:~# echo 1 > /sys/class/gpio/gpio12/value
root@OpenWrt:~#
Pues los jodidos se resisten :-X
Cuando intento el gpio 11, me dice que está ocupadoCódigo: [Seleccionar]root@OpenWrt:~# echo 11 > /sys/class/gpio/export
ash: write error: Device or resource busy
El gpio 12, apaga y enciende el led de powerCódigo: [Seleccionar]root@OpenWrt:~# echo 12 > /sys/class/gpio/export
root@OpenWrt:~# echo out > /sys/class/gpio/gpio12/direction
root@OpenWrt:~# echo 0 > /sys/class/gpio/gpio12/value
root@OpenWrt:~# echo 1 > /sys/class/gpio/gpio12/value
root@OpenWrt:~# echo 0 > /sys/class/gpio/gpio12/value
root@OpenWrt:~# echo 1 > /sys/class/gpio/gpio12/value
root@OpenWrt:~#
El resto, no hacen nada ???
Vale, entonces tengo un par de preguntas:
Los LEDs que ya has comprobado que funcionan ¿están bien asignados? Es decir, ¿cada uno realiza su función basandose en el nombre del LED?
El LED de Power con los últimos firmwares está encendido en verde nada más encender el router? (Se puede controlar con ambos GPIO el mismo LED de Power?
Los 3 LEDs que no hemos podido identificar se encienden en rojo alguna vez en el firmware original?
Saludos
Entonces voy a solicitar el soporte dejando los 3 LEDs que dan problemas, ya que si dices que se encienden al hacer el Test...Vale, entonces tengo un par de preguntas:
Los LEDs que ya has comprobado que funcionan ¿están bien asignados? Es decir, ¿cada uno realiza su función basandose en el nombre del LED?
El LED de Power con los últimos firmwares está encendido en verde nada más encender el router? (Se puede controlar con ambos GPIO el mismo LED de Power?
Los 3 LEDs que no hemos podido identificar se encienden en rojo alguna vez en el firmware original?
Saludos
Sí, los leds comprobados están bien asignados.
Sí, el led de power se enciende nada más enceder el router.
Y a la tercera pregunta ... no te sabría decir.
Nunca he conectado el router al ADSL ???
Lo que sí he visto, es que por 1 milisegundo, cuando enciendo el router, pone el led en rojo (fail) y luego lo apaga (como haciendo un test) de: power, 3g e internet.
Sí ;)En cuanto pongan el GPL en la web de Comtrend me pongo con este router sin ningún problema.
Ya irás contando como evoluciona el tema >:(
Por cierto, que como ya comenté en otro post: https://foro.seguridadwireless.net/openwrt/openwrt-en-routers-de-telefonica-home-station-alpha-asl26555-y-adb-p-dg-a4001n1/msg245806/#msg245806 tengo otro router de características similares, crees que se podría hacer algo con él ?
El Comtrend tiene el doble de Ram que el ADB, y debería notarse ;)
cat /proc/bus/pci/devices
Simplemente para ver qué WLAN lleva.El único problema es que hay que pedir el soporte por email y ellos te lo envían a una dirección física. ¿Alguno se anima a pedirlo o a mandarles emails hasta que accedan a mandarlo virtualmente?
http://www.adbglobal.com/medias/files/support_files/how%20to%20receive%20the%20code.png
Saludos!
BCM96328 Broadband Router
Login: admin
Password:
> cat /proc/bus/pci/devices
0048 14e46300 31 10002600 0 0 0 0 0 0 100 0 0 0 0 0 0 ohci_hcd
0050 14e46300 32 10002500 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci_hcd
0100 14e46328 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver
0200 14e4a8d8 1f 10f00004 0 0 0 0 0 0 4000 0 0 0 0 0 0 wl
>
mmm otro 43224 (0xa8d8)...El único problema es que hay que pedir el soporte por email y ellos te lo envían a una dirección física. ¿Alguno se anima a pedirlo o a mandarles emails hasta que accedan a mandarlo virtualmente?
http://www.adbglobal.com/medias/files/support_files/how%20to%20receive%20the%20code.png
Saludos!
Enviado mail.
Si dan señales de vida por mail o correo, ya aviso.CitarBCM96328 Broadband Router
Login: admin
Password:
> cat /proc/bus/pci/devices
0048 14e46300 31 10002600 0 0 0 0 0 0 100 0 0 0 0 0 0 ohci_hcd
0050 14e46300 32 10002500 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci_hcd
0100 14e46328 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver
0200 14e4a8d8 1f 10f00004 0 0 0 0 0 0 4000 0 0 0 0 0 0 wl
>
Pues entonces no te preocupes.No te deja hacer un dmesg?
Ah, con respecto al ADB, a ver gmtii si te manda el log con firm original, que yo no puedo ;)
ping ; sh
Si eso puedes intentar a hacer como en los firmwares de los comtrend. No deja de ser un firmware de movistar y puede que cuele.
Una vez logueado al router, haces:Código: [Seleccionar]ping ; sh
Si hay el mismo bug que en los Comtrend, eso debería ejecutar busybox, dejándote introducir cualquier comando linux.
Pones dmesg y ya tienes el boot log ;).
Dear Sir,
Could you please provide the SW version you are interested in?
Per our policy the source code will be shipped on a CD via courier, at your cost.
Moreover, please provide shipping address for source code CD.
Thanks
ADB Broadband
-----Original Message-----
From: xxxxxx
Sent: mercoledì 27 giugno 2012 14:45
To: ADBB GPL
Subject: P.DG A4001N
Hi
I am interested in the following product code gpl
ADB P.DG A4001N
My address
xxxxxx
Teléfono: xxxxxx
Thanks.
Diles que la última versión o la que se corresponda con el operador Movistar para España.Si eso puedes intentar a hacer como en los firmwares de los comtrend. No deja de ser un firmware de movistar y puede que cuele.
Una vez logueado al router, haces:Código: [Seleccionar]ping ; sh
Si hay el mismo bug que en los Comtrend, eso debería ejecutar busybox, dejándote introducir cualquier comando linux.
Pones dmesg y ya tienes el boot log ;).
Bien, lo miraré, pero ya será mañana ...
En el Comtrend AR-5387un desde luego ya no funciona.
Me acaban de contestar por mail los de ADB
Que jodíos, me quieren enviar el cd por courier y cobrarme los costes ;D
Con SW, se refieren al firmware ?CitarDear Sir,
Could you please provide the SW version you are interested in?
Per our policy the source code will be shipped on a CD via courier, at your cost.
Moreover, please provide shipping address for source code CD.
Thanks
ADB Broadband
-----Original Message-----
From: xxxxxx
Sent: mercoledì 27 giugno 2012 14:45
To: ADBB GPL
Subject: P.DG A4001N
Hi
I am interested in the following product code gpl
ADB P.DG A4001N
My address
xxxxxx
Teléfono: xxxxxx
Thanks.
buenas,No te preocupes, en el parche que envié pidiendo soporte eso está corregido:
Hay un led que debe parpadear mientras el router inicia, el power. El parche tiene mal el nombre:
Index: target/linux/brcm63xx/base-files/lib/brcm63xx.sh
===================================================================
--- target/linux/brcm63xx/base-files/lib/brcm63xx.sh (revisión: 32489)
+++ target/linux/brcm63xx/base-files/lib/brcm63xx.sh (copia de trabajo)
@@ -26,6 +26,10 @@
status_led="963281TAN::power"
ifname=eth0
;;
+ 963281T_TEF)
+ status_led="963281T_TEF::power"
+ ifname=eth0
+ ;;
en la definición de leds lo llamaste 963281T_TEF:green:power
Adjunto el log del fw original. Hay una cosa común a los broadcom con el driver propietario y es este mensaje:
[spoiler]wl:srom not detected,using main memory mapped srom info(wombo board)
wl:loading /etc/wlan/bcm43225_map.bin
wl0: Broadcom BCMa8d8 802.11 Wireless Controller 5.60.120.1.cpePDG_TEF_SP_4.06L4.2[/spoiler]
Oh Dios, me amo :D.
Conseguido:
https://dl.dropbox.com/u/4708147/openwrt/wlan_maps/wlan_map.zip
¡A investigar!
Vale más o menos creo que lo tengo. Voy a actualizar los parches y el svn a la última versión y voy a rehacer los parches de la SPROM BCMA.He tenido algún problemilla y he tenido que descargarme el trunk de openwrt otra vez. Así que colgaré mañana por la mañana lo antes que pueda el firmware.
Aquí el programilla que me he hecho con algunas indicaciones de KanjiMonster (jogo): https://github.com/Noltari/SPROM_Map
Ya tengo la configuración necesaria para la SPROM, sólo queda probarla. En cuanto termine subo el firmware compilado.
Saludos!
Aquí está el firmware. Me voy a la cama que ya es hora xD.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_bcma_43225.bin
Ponedme un bootlog en cuanto podáis ;).
Saludos!
muy buen trabajo! .. >:(Sí, básicamente estoy intentando registrar la BCMA Fallback SPROM. Pero intenta leer OTP en vez de la SPROM y por eso falla.
sigue sin funcionar... como lo haces? leerás el fichero bc,43225_map.bin desde el sistema de ficheros? añades un parche con el contenido de la SPROM ?
el log:
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Sat Jun 30 04:36:10 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Failed to get SPROM: -71
[ 0.452000] bcma: Bus registered
[ 0.456000] NET: Registered protocol family 2
[ 0.460000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.488000] TCP reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.496000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.508000] PCI: CLS 0 bytes, default 16
[ 0.512000] audit: initializing netlink socket (disabled)
[ 0.516000] type=2000 audit(0.516:1): initialized
[ 0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.528000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.540000] msgmni has been set to 57
[ 0.544000] io scheduler noop registered
[ 0.548000] io scheduler deadline registered (default)
[ 0.556000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.564000] console [ttyS0] enabled, bootconsole disabled
[ 0.580000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.588000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.592000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.600000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.608000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.616000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.624000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.628000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.636000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.644000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.648000] Creating 5 MTD partitions on "spi0.0":
[ 0.656000] 0x000000000000-0x000000010000 : "CFE"
[ 0.664000] 0x000000010100-0x000000100000 : "kernel"
[ 0.668000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.684000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.692000] mtd: partition "rootfs" set to be root filesystem
[ 0.696000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.704000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.712000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.720000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.772000] Registered led device: 963281T_TEF:green:power
[ 0.772000] Registered led device: 963281T_TEF:red:stop
[ 0.772000] Registered led device: 963281T_TEF:green:inet
[ 0.776000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.776000] Registered led device: 963281T_TEF:green:ppp
[ 0.776000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.776000] Registered led device: 963281T_TEF:green:3g
[ 0.776000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.776000] Registered led device: 963281T_TEF:green:wlan
[ 0.776000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.780000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.780000] TCP cubic registered
[ 0.784000] NET: Registered protocol family 17
[ 0.788000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.384000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.440000] roboswitch: Probing device eth0:
[ 3.444000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.452000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.460000] roboswitch: Probing device eth1: No such device
[ 3.464000] roboswitch: Probing device eth2: No such device
[ 3.472000] roboswitch: Probing device eth3: No such device
[ 12.084000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.092000] Backport based on wireless-testing.git master-2012-06-14
[ 12.096000] compat.git: wireless-testing.git
[ 12.156000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.160000] cfg80211: World regulatory domain updated:
[ 12.168000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.176000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.184000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.192000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.200000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.208000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.600000] NET: Registered protocol family 10
[ 12.664000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.676000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 13.316000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 13.324000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 13.360000] Button Hotplug driver version 0.4.1
[ 13.680000] PPP generic driver version 2.4.2
[ 14.080000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.092000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.404000] NET: Registered protocol family 24
[ 14.440000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.812000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.096000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 20.892000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.900000] device eth0 entered promiscuous mode
[ 20.908000] br-lan: port 1(eth0) entered forwarding state
[ 20.912000] br-lan: port 1(eth0) entered forwarding state
[ 22.916000] br-lan: port 1(eth0) entered forwarding state
[ 31.120000] eth0: no IPv6 routers present
[ 39.044000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 39.060000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 39.064000] jffs2_build_filesystem(): erasing all blocks after the end marker...
root@OpenWrt:/etc/config#
[/spoiler]Aquí está el firmware. Me voy a la cama que ya es hora xD.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_bcma_43225.bin
Ponedme un bootlog en cuanto podáis ;).
Saludos!
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.408000] [DEBUG] bcma_sprom_get 1
[ 0.408000] [DEBUG] bcma_sprom_get 2
[ 0.412000] [DEBUG] bcma_sprom_get 6
[ 0.416000] [DEBUG] bcma_sprom_get 7
[ 0.420000] [DEBUG] bcma_sprom_get 8
[ 0.464000] [DEBUG] bcma_sprom_get 9
[ 0.468000] [DEBUG] bcma_sprom_get 10
[ 0.472000] [DEBUG] bcma_sprom_get 12
[ 0.476000] bcma: Failed to get SPROM: -71
[ 0.480000] bcma: Bus registered
]muy buen trabajo! .. >:(Sí, básicamente estoy intentando registrar la BCMA Fallback SPROM. Pero intenta leer OTP en vez de la SPROM y por eso falla.
sigue sin funcionar... como lo haces? leerás el fichero bc,43225_map.bin desde el sistema de ficheros? añades un parche con el contenido de la SPROM ?
el log:
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Sat Jun 30 04:36:10 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Failed to get SPROM: -71
[ 0.452000] bcma: Bus registered
[ 0.456000] NET: Registered protocol family 2
[ 0.460000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.488000] TCP reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.496000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.508000] PCI: CLS 0 bytes, default 16
[ 0.512000] audit: initializing netlink socket (disabled)
[ 0.516000] type=2000 audit(0.516:1): initialized
[ 0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.528000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.540000] msgmni has been set to 57
[ 0.544000] io scheduler noop registered
[ 0.548000] io scheduler deadline registered (default)
[ 0.556000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.564000] console [ttyS0] enabled, bootconsole disabled
[ 0.580000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.588000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.592000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.600000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.608000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.616000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.624000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.628000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.636000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.644000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.648000] Creating 5 MTD partitions on "spi0.0":
[ 0.656000] 0x000000000000-0x000000010000 : "CFE"
[ 0.664000] 0x000000010100-0x000000100000 : "kernel"
[ 0.668000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.684000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.692000] mtd: partition "rootfs" set to be root filesystem
[ 0.696000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.704000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.712000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.720000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.772000] Registered led device: 963281T_TEF:green:power
[ 0.772000] Registered led device: 963281T_TEF:red:stop
[ 0.772000] Registered led device: 963281T_TEF:green:inet
[ 0.776000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.776000] Registered led device: 963281T_TEF:green:ppp
[ 0.776000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.776000] Registered led device: 963281T_TEF:green:3g
[ 0.776000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.776000] Registered led device: 963281T_TEF:green:wlan
[ 0.776000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.780000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.780000] TCP cubic registered
[ 0.784000] NET: Registered protocol family 17
[ 0.788000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.384000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.440000] roboswitch: Probing device eth0:
[ 3.444000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.452000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.460000] roboswitch: Probing device eth1: No such device
[ 3.464000] roboswitch: Probing device eth2: No such device
[ 3.472000] roboswitch: Probing device eth3: No such device
[ 12.084000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.092000] Backport based on wireless-testing.git master-2012-06-14
[ 12.096000] compat.git: wireless-testing.git
[ 12.156000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.160000] cfg80211: World regulatory domain updated:
[ 12.168000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.176000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.184000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.192000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.200000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.208000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.600000] NET: Registered protocol family 10
[ 12.664000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.676000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 13.316000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 13.324000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 13.360000] Button Hotplug driver version 0.4.1
[ 13.680000] PPP generic driver version 2.4.2
[ 14.080000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.092000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.404000] NET: Registered protocol family 24
[ 14.440000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.812000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.096000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 20.892000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.900000] device eth0 entered promiscuous mode
[ 20.908000] br-lan: port 1(eth0) entered forwarding state
[ 20.912000] br-lan: port 1(eth0) entered forwarding state
[ 22.916000] br-lan: port 1(eth0) entered forwarding state
[ 31.120000] eth0: no IPv6 routers present
[ 39.044000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 39.060000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 39.064000] jffs2_build_filesystem(): erasing all blocks after the end marker...
root@OpenWrt:/etc/config#
[/spoiler]Aquí está el firmware. Me voy a la cama que ya es hora xD.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_bcma_43225.bin
Ponedme un bootlog en cuanto podáis ;).
Saludos!
He desactivado la lectura por defecto, a ver si ahora funciona. También he metido más de un debug ;).
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_forced_bcma_sprom_debug.bin
igual.. ahí vaPrueba este porfa:Código: [Seleccionar][ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
]
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.408000] [DEBUG] bcma_sprom_get 1
[ 0.408000] [DEBUG] bcma_sprom_get 2
[ 0.412000] [DEBUG] bcma_sprom_get 6
[ 0.416000] [DEBUG] bcma_sprom_get 7
[ 0.420000] [DEBUG] bcma_sprom_get 8
[ 0.464000] [DEBUG] bcma_sprom_get 9
[ 0.468000] [DEBUG] bcma_sprom_get 10
[ 0.472000] [DEBUG] bcma_sprom_get 12
[ 0.476000] bcma: Failed to get SPROM: -71
[ 0.480000] bcma: Bus registeredmuy buen trabajo! .. >:(Sí, básicamente estoy intentando registrar la BCMA Fallback SPROM. Pero intenta leer OTP en vez de la SPROM y por eso falla.
sigue sin funcionar... como lo haces? leerás el fichero bc,43225_map.bin desde el sistema de ficheros? añades un parche con el contenido de la SPROM ?
el log:
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Sat Jun 30 04:36:10 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Failed to get SPROM: -71
[ 0.452000] bcma: Bus registered
[ 0.456000] NET: Registered protocol family 2
[ 0.460000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.488000] TCP reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.496000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.508000] PCI: CLS 0 bytes, default 16
[ 0.512000] audit: initializing netlink socket (disabled)
[ 0.516000] type=2000 audit(0.516:1): initialized
[ 0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.528000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.540000] msgmni has been set to 57
[ 0.544000] io scheduler noop registered
[ 0.548000] io scheduler deadline registered (default)
[ 0.556000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.564000] console [ttyS0] enabled, bootconsole disabled
[ 0.580000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.588000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.592000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.600000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.608000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.616000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.624000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.628000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.636000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.644000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.648000] Creating 5 MTD partitions on "spi0.0":
[ 0.656000] 0x000000000000-0x000000010000 : "CFE"
[ 0.664000] 0x000000010100-0x000000100000 : "kernel"
[ 0.668000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.684000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.692000] mtd: partition "rootfs" set to be root filesystem
[ 0.696000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.704000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.712000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.720000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.772000] Registered led device: 963281T_TEF:green:power
[ 0.772000] Registered led device: 963281T_TEF:red:stop
[ 0.772000] Registered led device: 963281T_TEF:green:inet
[ 0.776000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.776000] Registered led device: 963281T_TEF:green:ppp
[ 0.776000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.776000] Registered led device: 963281T_TEF:green:3g
[ 0.776000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.776000] Registered led device: 963281T_TEF:green:wlan
[ 0.776000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.780000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.780000] TCP cubic registered
[ 0.784000] NET: Registered protocol family 17
[ 0.788000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.384000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.440000] roboswitch: Probing device eth0:
[ 3.444000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.452000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.460000] roboswitch: Probing device eth1: No such device
[ 3.464000] roboswitch: Probing device eth2: No such device
[ 3.472000] roboswitch: Probing device eth3: No such device
[ 12.084000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.092000] Backport based on wireless-testing.git master-2012-06-14
[ 12.096000] compat.git: wireless-testing.git
[ 12.156000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.160000] cfg80211: World regulatory domain updated:
[ 12.168000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.176000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.184000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.192000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.200000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.208000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.600000] NET: Registered protocol family 10
[ 12.664000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.676000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 13.316000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 13.324000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 13.360000] Button Hotplug driver version 0.4.1
[ 13.680000] PPP generic driver version 2.4.2
[ 14.080000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.092000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.404000] NET: Registered protocol family 24
[ 14.440000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.812000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.096000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 20.892000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.900000] device eth0 entered promiscuous mode
[ 20.908000] br-lan: port 1(eth0) entered forwarding state
[ 20.912000] br-lan: port 1(eth0) entered forwarding state
[ 22.916000] br-lan: port 1(eth0) entered forwarding state
[ 31.120000] eth0: no IPv6 routers present
[ 39.044000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 39.060000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 39.064000] jffs2_build_filesystem(): erasing all blocks after the end marker...
root@OpenWrt:/etc/config#
[/spoiler]Aquí está el firmware. Me voy a la cama que ya es hora xD.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_bcma_43225.bin
Ponedme un bootlog en cuanto podáis ;).
Saludos!
He desactivado la lectura por defecto, a ver si ahora funciona. También he metido más de un debug ;).
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_forced_bcma_sprom_debug.bin
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.408000] [DEBUG] bcma_sprom_get 1
[ 0.408000] [DEBUG] bcma_sprom_get 2
[ 0.412000] [DEBUG] bcma_sprom_get 3
[ 0.416000] [DEBUG] bcma_sprom_get 4
[ 0.420000] [DEBUG] bcma_sprom_get 5
[ 0.424000] bcma: Bus registered
[ 13.296000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 53.012000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 53.344000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 156.652000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 161.772000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 199.328000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 201.724000] b43 bcma0:0: wlan0: disabling HT as WMM/QoS is not supported
wlan0 IEEE 802.11bg ESSID:"TEST_AP"
Mode:Managed Frequency:2.437 GHz Access Point: 30:39:F2:81:3B:F6
Bit Rate=48 Mb/s Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-37 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:3 Invalid misc:7 Missed beacon:0
iphy phy0
Band 1:
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS)
* 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS)
* 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
igual.. ahí vaPrueba este porfa:Código: [Seleccionar][ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
]
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.408000] [DEBUG] bcma_sprom_get 1
[ 0.408000] [DEBUG] bcma_sprom_get 2
[ 0.412000] [DEBUG] bcma_sprom_get 6
[ 0.416000] [DEBUG] bcma_sprom_get 7
[ 0.420000] [DEBUG] bcma_sprom_get 8
[ 0.464000] [DEBUG] bcma_sprom_get 9
[ 0.468000] [DEBUG] bcma_sprom_get 10
[ 0.472000] [DEBUG] bcma_sprom_get 12
[ 0.476000] bcma: Failed to get SPROM: -71
[ 0.480000] bcma: Bus registeredmuy buen trabajo! .. >:(Sí, básicamente estoy intentando registrar la BCMA Fallback SPROM. Pero intenta leer OTP en vez de la SPROM y por eso falla.
sigue sin funcionar... como lo haces? leerás el fichero bc,43225_map.bin desde el sistema de ficheros? añades un parche con el contenido de la SPROM ?
el log:
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Sat Jun 30 04:36:10 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Failed to get SPROM: -71
[ 0.452000] bcma: Bus registered
[ 0.456000] NET: Registered protocol family 2
[ 0.460000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.488000] TCP reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.496000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.508000] PCI: CLS 0 bytes, default 16
[ 0.512000] audit: initializing netlink socket (disabled)
[ 0.516000] type=2000 audit(0.516:1): initialized
[ 0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.528000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.540000] msgmni has been set to 57
[ 0.544000] io scheduler noop registered
[ 0.548000] io scheduler deadline registered (default)
[ 0.556000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.564000] console [ttyS0] enabled, bootconsole disabled
[ 0.580000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.588000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.592000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.600000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.608000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.616000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.624000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.628000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.636000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.644000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.648000] Creating 5 MTD partitions on "spi0.0":
[ 0.656000] 0x000000000000-0x000000010000 : "CFE"
[ 0.664000] 0x000000010100-0x000000100000 : "kernel"
[ 0.668000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.684000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.692000] mtd: partition "rootfs" set to be root filesystem
[ 0.696000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.704000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.712000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.720000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.772000] Registered led device: 963281T_TEF:green:power
[ 0.772000] Registered led device: 963281T_TEF:red:stop
[ 0.772000] Registered led device: 963281T_TEF:green:inet
[ 0.776000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.776000] Registered led device: 963281T_TEF:green:ppp
[ 0.776000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.776000] Registered led device: 963281T_TEF:green:3g
[ 0.776000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.776000] Registered led device: 963281T_TEF:green:wlan
[ 0.776000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.780000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.780000] TCP cubic registered
[ 0.784000] NET: Registered protocol family 17
[ 0.788000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.384000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.440000] roboswitch: Probing device eth0:
[ 3.444000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.452000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.460000] roboswitch: Probing device eth1: No such device
[ 3.464000] roboswitch: Probing device eth2: No such device
[ 3.472000] roboswitch: Probing device eth3: No such device
[ 12.084000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.092000] Backport based on wireless-testing.git master-2012-06-14
[ 12.096000] compat.git: wireless-testing.git
[ 12.156000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.160000] cfg80211: World regulatory domain updated:
[ 12.168000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.176000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.184000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.192000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.200000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.208000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.600000] NET: Registered protocol family 10
[ 12.664000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.676000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 13.316000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 13.324000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 13.360000] Button Hotplug driver version 0.4.1
[ 13.680000] PPP generic driver version 2.4.2
[ 14.080000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.092000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.404000] NET: Registered protocol family 24
[ 14.440000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.812000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.096000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 20.892000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.900000] device eth0 entered promiscuous mode
[ 20.908000] br-lan: port 1(eth0) entered forwarding state
[ 20.912000] br-lan: port 1(eth0) entered forwarding state
[ 22.916000] br-lan: port 1(eth0) entered forwarding state
[ 31.120000] eth0: no IPv6 routers present
[ 39.044000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 39.060000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 39.064000] jffs2_build_filesystem(): erasing all blocks after the end marker...
root@OpenWrt:/etc/config#
[/spoiler]Aquí está el firmware. Me voy a la cama que ya es hora xD.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_bcma_43225.bin
Ponedme un bootlog en cuanto podáis ;).
Saludos!
He desactivado la lectura por defecto, a ver si ahora funciona. También he metido más de un debug ;).
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_forced_bcma_sprom_debug.bin
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_forced_bcma_sprom_debug2.bin
perfecto genio!Tócate los raviolli:Código: [Seleccionar][ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.408000] [DEBUG] bcma_sprom_get 1
[ 0.408000] [DEBUG] bcma_sprom_get 2
[ 0.412000] [DEBUG] bcma_sprom_get 3
[ 0.416000] [DEBUG] bcma_sprom_get 4
[ 0.420000] [DEBUG] bcma_sprom_get 5
[ 0.424000] bcma: Bus registered
[ 13.296000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 53.012000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 53.344000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 156.652000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 161.772000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 199.328000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 201.724000] b43 bcma0:0: wlan0: disabling HT as WMM/QoS is not supportedCódigo: [Seleccionar]wlan0 IEEE 802.11bg ESSID:"TEST_AP"
Mode:Managed Frequency:2.437 GHz Access Point: 30:39:F2:81:3B:F6
Bit Rate=48 Mb/s Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-37 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:3 Invalid misc:7 Missed beacon:0
Me interesaría probar con brcmsmac a ver si soporta wifiNCódigo: [Seleccionar]iphy phy0
Band 1:
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS)
* 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS)
* 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbpsigual.. ahí vaPrueba este porfa:Código: [Seleccionar][ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
]
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.408000] [DEBUG] bcma_sprom_get 1
[ 0.408000] [DEBUG] bcma_sprom_get 2
[ 0.412000] [DEBUG] bcma_sprom_get 6
[ 0.416000] [DEBUG] bcma_sprom_get 7
[ 0.420000] [DEBUG] bcma_sprom_get 8
[ 0.464000] [DEBUG] bcma_sprom_get 9
[ 0.468000] [DEBUG] bcma_sprom_get 10
[ 0.472000] [DEBUG] bcma_sprom_get 12
[ 0.476000] bcma: Failed to get SPROM: -71
[ 0.480000] bcma: Bus registeredmuy buen trabajo! .. >:(Sí, básicamente estoy intentando registrar la BCMA Fallback SPROM. Pero intenta leer OTP en vez de la SPROM y por eso falla.
sigue sin funcionar... como lo haces? leerás el fichero bc,43225_map.bin desde el sistema de ficheros? añades un parche con el contenido de la SPROM ?
el log:
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Sat Jun 30 04:36:10 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Failed to get SPROM: -71
[ 0.452000] bcma: Bus registered
[ 0.456000] NET: Registered protocol family 2
[ 0.460000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.488000] TCP reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.496000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.508000] PCI: CLS 0 bytes, default 16
[ 0.512000] audit: initializing netlink socket (disabled)
[ 0.516000] type=2000 audit(0.516:1): initialized
[ 0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.528000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.540000] msgmni has been set to 57
[ 0.544000] io scheduler noop registered
[ 0.548000] io scheduler deadline registered (default)
[ 0.556000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.564000] console [ttyS0] enabled, bootconsole disabled
[ 0.580000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.588000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.592000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.600000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.608000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.616000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.624000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.628000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.636000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.644000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.648000] Creating 5 MTD partitions on "spi0.0":
[ 0.656000] 0x000000000000-0x000000010000 : "CFE"
[ 0.664000] 0x000000010100-0x000000100000 : "kernel"
[ 0.668000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.684000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.692000] mtd: partition "rootfs" set to be root filesystem
[ 0.696000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.704000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.712000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.720000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.772000] Registered led device: 963281T_TEF:green:power
[ 0.772000] Registered led device: 963281T_TEF:red:stop
[ 0.772000] Registered led device: 963281T_TEF:green:inet
[ 0.776000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.776000] Registered led device: 963281T_TEF:green:ppp
[ 0.776000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.776000] Registered led device: 963281T_TEF:green:3g
[ 0.776000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.776000] Registered led device: 963281T_TEF:green:wlan
[ 0.776000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.780000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.780000] TCP cubic registered
[ 0.784000] NET: Registered protocol family 17
[ 0.788000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.384000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.440000] roboswitch: Probing device eth0:
[ 3.444000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.452000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.460000] roboswitch: Probing device eth1: No such device
[ 3.464000] roboswitch: Probing device eth2: No such device
[ 3.472000] roboswitch: Probing device eth3: No such device
[ 12.084000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.092000] Backport based on wireless-testing.git master-2012-06-14
[ 12.096000] compat.git: wireless-testing.git
[ 12.156000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.160000] cfg80211: World regulatory domain updated:
[ 12.168000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.176000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.184000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.192000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.200000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.208000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.600000] NET: Registered protocol family 10
[ 12.664000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.676000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 13.316000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 13.324000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 13.360000] Button Hotplug driver version 0.4.1
[ 13.680000] PPP generic driver version 2.4.2
[ 14.080000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.092000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.404000] NET: Registered protocol family 24
[ 14.440000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.812000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.096000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 20.892000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.900000] device eth0 entered promiscuous mode
[ 20.908000] br-lan: port 1(eth0) entered forwarding state
[ 20.912000] br-lan: port 1(eth0) entered forwarding state
[ 22.916000] br-lan: port 1(eth0) entered forwarding state
[ 31.120000] eth0: no IPv6 routers present
[ 39.044000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 39.060000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 39.064000] jffs2_build_filesystem(): erasing all blocks after the end marker...
root@OpenWrt:/etc/config#
[/spoiler]Aquí está el firmware. Me voy a la cama que ya es hora xD.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_bcma_43225.bin
Ponedme un bootlog en cuanto podáis ;).
Saludos!
He desactivado la lectura por defecto, a ver si ahora funciona. También he metido más de un debug ;).
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_forced_bcma_sprom_debug.bin
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_forced_bcma_sprom_debug2.bin
//if (!bcma_sprom_ext_available(bus)) {
if (true) {
Simplemente cambiando eso funciona, combinado con los datos extraídos del mapa de la SPROM del 43225.Instalado y funcionando en modo cliente transparente con relayd (aunque la wifi sólo funciona en modo 'g') ;)¿Es el último firmware que he colgado no?
Magnífico trabajo >:( >:( >:( >:(
dmesg
[spoiler][ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Jun 30 15:08:07 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.804000] Freeing unused kernel memory: 200k freed
[ 3.368000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.424000] roboswitch: Probing device eth0:
[ 3.428000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.436000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.444000] roboswitch: Probing device eth1: No such device
[ 3.448000] roboswitch: Probing device eth2: No such device
[ 3.456000] roboswitch: Probing device eth3: No such device
[ 9.464000] JFFS2 notice: (345) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 2 orphan) found.
[ 12.308000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.312000] Backport based on wireless-testing.git master-2012-06-14
[ 12.320000] compat.git: wireless-testing.git
[ 12.380000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.384000] cfg80211: World regulatory domain updated:
[ 12.388000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.400000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.408000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.416000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.424000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.432000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.824000] NET: Registered protocol family 10
[ 12.892000] There is already a switch registered on the device 'eth0'
[ 12.896000] roboswitch: Probing device eth1: No such device
[ 12.904000] roboswitch: Probing device eth2: No such device
[ 12.908000] roboswitch: Probing device eth3: No such device
[ 13.560000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 13.568000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 13.600000] Button Hotplug driver version 0.4.1
[ 14.080000] PPP generic driver version 2.4.2
[ 14.324000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.336000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.648000] NET: Registered protocol family 24
[ 14.680000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 15.052000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.336000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.184000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 19.192000] device eth0 entered promiscuous mode
[ 19.200000] br-lan: port 1(eth0) entered forwarding state
[ 19.204000] br-lan: port 1(eth0) entered forwarding state
[ 21.208000] br-lan: port 1(eth0) entered forwarding state
[ 21.572000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 21.676000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.412000] b43 bcma0:0: wlan0: disabling HT as WMM/QoS is not supported
[ 25.692000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 29.296000] eth0: no IPv6 routers present
[ 36.616000] wlan0: no IPv6 routers present
[/spoiler]
Ahora ya para 'rizar el rizo' a por el modo 'n' y el soporte USB ^-^ >:D
Enhorabuena a todos, en especial a Noltari, gracias por vuestro trabajo.
¿Es el último firmware que he colgado no?
A ver si puedo hablar tranquilamente con jogo y me comenta como solucionar de la forma más apropiada posible para que acepten el parche lo de la fallback SPROM.
Me alegro de que funcione, os aseguro que me ha llevado su tiempo conseguirlo ^^.
Saludos!
Enhorabuena a todos, en especial a Noltari, gracias por vuestro trabajo.Gracias :D.
Con respecto al USB y al Wifi N, me temo que es cuestión de configuraciones del firmware (no controlo muy bien las del Wifi N xDDDD).
Prueba este firmware:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcmsmac_usb.bin
Aviso: puede que el Wifi no funcione si brcmsmac no tiene definido el 43225 (WLAN de este router).
Saludos.
wifi N funcionando! ... el brcmsmac si que soporta el 43225... bueno nos queda el USB.
bootlog
[spoiler][ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Jun 30 18:55:39 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.156000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.164000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.404000] roboswitch: Probing device eth0:
[ 3.408000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.416000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.424000] roboswitch: Probing device eth1: No such device
[ 3.428000] roboswitch: Probing device eth2: No such device
[ 3.432000] roboswitch: Probing device eth3: No such device
[ 12.040000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.048000] Backport based on wireless-testing.git master-2012-06-14
[ 12.056000] compat.git: wireless-testing.git
[ 12.116000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.120000] cfg80211: World regulatory domain updated:
[ 12.128000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.136000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.144000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.152000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.160000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.168000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.560000] NET: Registered protocol family 10
[ 12.976000] SCSI subsystem initialized
[ 13.024000] There is already a switch registered on the device 'eth0'
[ 13.032000] roboswitch: Probing device eth1: No such device
[ 13.036000] roboswitch: Probing device eth2: No such device
[ 13.044000] roboswitch: Probing device eth3: No such device
[ 13.320000] usbcore: registered new interface driver usbfs
[ 13.324000] usbcore: registered new interface driver hub
[ 13.332000] usbcore: registered new device driver usb
[ 13.844000] Button Hotplug driver version 0.4.1
[ 14.012000] PPP generic driver version 2.4.2
[ 14.452000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.804000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.812000] ieee80211 phy0: wl0: brcms_c_attach_stf_ant_init: Invalid antennas available in srom (0x0), using 3
[ 14.824000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.968000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.440000] NET: Registered protocol family 24
[ 15.748000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.792000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.688000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.996000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.040000] Initializing USB Mass Storage driver...
[ 17.048000] usbcore: registered new interface driver usb-storage
[ 17.052000] USB Mass Storage support registered.
[ 17.216000] usbcore: registered new interface driver ums-alauda
[ 17.248000] usbcore: registered new interface driver ums-cypress
[ 17.276000] usbcore: registered new interface driver ums-datafab
[ 17.308000] usbcore: registered new interface driver ums-freecom
[ 17.336000] usbcore: registered new interface driver ums-isd200
[ 17.364000] usbcore: registered new interface driver ums-jumpshot
[ 17.392000] usbcore: registered new interface driver ums-karma
[ 17.424000] usbcore: registered new interface driver ums-sddr09
[ 17.452000] usbcore: registered new interface driver ums-sddr55
[ 17.624000] usbcore: registered new interface driver ums-usbat
[ 17.656000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 22.760000] device eth0 entered promiscuous mode
[ 22.768000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 22.776000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 22.788000] br-lan: port 1(eth0) entered forwarding state
[ 22.792000] br-lan: port 1(eth0) entered forwarding state
[ 24.796000] br-lan: port 1(eth0) entered forwarding state
[ 33.368000] eth0: no IPv6 routers present
[ 37.984000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 38.000000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 38.004000] jffs2_build_filesystem(): erasing all blocks after the end marker... dummy
[/spoiler]Con respecto al USB y al Wifi N, me temo que es cuestión de configuraciones del firmware (no controlo muy bien las del Wifi N xDDDD).
Prueba este firmware:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcmsmac_usb.bin
Aviso: puede que el Wifi no funcione si brcmsmac no tiene definido el 43225 (WLAN de este router).
Saludos.
Ya también he instalado la última versión y comprobado que el wifi 'n' funciona.He actualizado el programita, incorporando más parámetros y he actualizado los parches:
Eso sí, el rendimiento por wifi, es muchísimo menor al que consigo con el hg556a (atheros).
No se si será el driver .... ^-^
Mañana, en cuanto pueda, lo pruebo ???Utiliza este firmware mejor:
Enviado desde mi u8500 usando Tapatalk 2
Utiliza este firmware mejor:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches3.bin
Incorpora el backpot de Hauke del BCMA/SSB.
He actualizado el programita, incorporando más parámetros y he actualizado los parches:
https://dl.dropbox.com/u/4708147/openwrt/63281T/63281T_TEF_svn.patch
Firmware compilado: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches2.bin
Contadme si funciona y si es más estable ;).
Saludos!
Las pruebas deberías hacerlas partiendo de una configuración nueva, dejando que el firmware borre la configuración. Sobre todo porque he cambiado el driver de brcsmac a wl y no llevan la misma configuración. En cuanto a lo del ethernet puede ser por el mismo motivo :$...Utiliza este firmware mejor:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches3.bin
Incorpora el backpot de Hauke del BCMA/SSB.
Con este firmware, el wifi no funciona de forma correcta.
Aparece en LuCi, pero no permite activarlo ni hacer un scan.
dmesg
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 3 03:37:26 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.492000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.660000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 2.800000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.020000] roboswitch: Probing device eth0:
[ 3.024000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.032000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.040000] roboswitch: Probing device eth1: No such device
[ 3.048000] roboswitch: Probing device eth2: No such device
[ 3.052000] roboswitch: Probing device eth3: No such device
[ 9.088000] JFFS2 notice: (342) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (1 unchecked, 19 orphan) and 153 of xref (0 dead, 148 orphan) found.
[ 12.596000] NET: Registered protocol family 10
[ 12.660000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.672000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 14.208000] wl: module license 'unspecified' taints kernel.
[ 14.212000] Disabling lock debugging due to kernel taint
[ 14.320000] SSB/BCMA glue driver successfully attached
[ 14.348000] Button Hotplug driver version 0.4.1
[ 14.396000] PPP generic driver version 2.4.2
[ 14.624000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.824000] NET: Registered protocol family 24
[ 14.856000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 15.224000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.508000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.052000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.064000] device eth0 entered promiscuous mode
[ 19.072000] br-lan: port 1(eth0) entered forwarding state
[ 19.076000] br-lan: port 1(eth0) entered forwarding state
[ 21.080000] br-lan: port 1(eth0) entered forwarding state
[ 29.496000] eth0: no IPv6 routers present
[/spoiler]He actualizado el programita, incorporando más parámetros y he actualizado los parches:
https://dl.dropbox.com/u/4708147/openwrt/63281T/63281T_TEF_svn.patch
Firmware compilado: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches2.bin
Contadme si funciona y si es más estable ;).
Saludos!
Probado, el wifi funciona, pero me ha dejado sin ethernet ¿?
Por suerte, cuando actualizé, lo tenía configurado como cliente wifi (usando relayd), así que puedo acceder a él.
Quizás debería restaurar openwrt a los valores por defecto pero ... no me convence ... no tengo claro que me quede sin conexión al router ... así que probablemente le meta un firmware de los que funcionaban, vía wifi.
El dmesg
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Jul 2 23:35:47 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.392000] roboswitch: Probing device eth0:
[ 3.396000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.404000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.412000] roboswitch: Probing device eth1: No such device
[ 3.416000] roboswitch: Probing device eth2: No such device
[ 3.424000] roboswitch: Probing device eth3: No such device
[ 9.440000] JFFS2 notice: (345) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (0 unchecked, 19 orphan) and 24 of xref (0 dead, 19 orphan) found.
[ 12.264000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.272000] Backport based on wireless-testing.git master-2012-06-14
[ 12.280000] compat.git: wireless-testing.git
[ 12.340000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.344000] cfg80211: World regulatory domain updated:
[ 12.352000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.360000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.368000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.376000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.384000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.392000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.788000] NET: Registered protocol family 10
[ 13.212000] SCSI subsystem initialized
[ 13.264000] There is already a switch registered on the device 'eth0'
[ 13.272000] roboswitch: Probing device eth1: No such device
[ 13.276000] roboswitch: Probing device eth2: No such device
[ 13.280000] roboswitch: Probing device eth3: No such device
[ 13.560000] usbcore: registered new interface driver usbfs
[ 13.568000] usbcore: registered new interface driver hub
[ 13.576000] usbcore: registered new device driver usb
[ 14.100000] Button Hotplug driver version 0.4.1
[ 14.268000] PPP generic driver version 2.4.2
[ 14.700000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 15.052000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 15.064000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.208000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.680000] NET: Registered protocol family 24
[ 15.988000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.032000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.928000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.236000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.284000] Initializing USB Mass Storage driver...
[ 17.288000] usbcore: registered new interface driver usb-storage
[ 17.296000] USB Mass Storage support registered.
[ 17.460000] usbcore: registered new interface driver ums-alauda
[ 17.488000] usbcore: registered new interface driver ums-cypress
[ 17.520000] usbcore: registered new interface driver ums-datafab
[ 17.548000] usbcore: registered new interface driver ums-freecom
[ 17.576000] usbcore: registered new interface driver ums-isd200
[ 17.608000] usbcore: registered new interface driver ums-jumpshot
[ 17.636000] usbcore: registered new interface driver ums-karma
[ 17.664000] usbcore: registered new interface driver ums-sddr09
[ 17.696000] usbcore: registered new interface driver ums-sddr55
[ 17.868000] usbcore: registered new interface driver ums-usbat
[ 17.896000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 21.720000] device eth0 entered promiscuous mode
[ 21.728000] br-lan: port 1(eth0) entered forwarding state
[ 21.732000] br-lan: port 1(eth0) entered forwarding state
[ 23.736000] br-lan: port 1(eth0) entered forwarding state
[ 23.864000] dummy
[ 23.868000] dummy
[ 23.868000] dummy
[ 23.872000] dummy
[ 23.872000] dummy
[ 23.876000] dummy
[ 23.880000] dummy
[ 23.880000] dummy
[ 23.884000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 23.892000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 23.948000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.248000] dummy
[ 27.252000] dummy
[ 27.252000] dummy
[ 27.256000] dummy
[ 27.256000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 27.264000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 27.276000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 27.284000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.952000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 32.480000] eth0: no IPv6 routers present
[ 38.064000] wlan0: no IPv6 routers present
[/spoiler]
Probados ambos firmwares, borrando la configuración.No sé qué narices me ha pasado al compilar el firmware que el driver del wifi no se ha instalado -.-...
En este: openwrt-963281T_TEF-generic-squashfs-cfe_final_patches3.bin, sigue sin funcionar el wifi.
Eso sí, ya no aparece tampoco en LuCi (tenías razón, había quedado algún 'rastro' por ahí).
El dmseg:
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 3 03:37:26 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.492000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.660000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 3.028000] roboswitch: Probing device eth0:
[ 3.032000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.040000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.048000] roboswitch: Probing device eth1: No such device
[ 3.052000] roboswitch: Probing device eth2: No such device
[ 3.060000] roboswitch: Probing device eth3: No such device
[ 11.740000] NET: Registered protocol family 10
[ 11.804000] There is already a switch registered on the device 'eth0'
[ 11.812000] roboswitch: Probing device eth1: No such device
[ 11.816000] roboswitch: Probing device eth2: No such device
[ 11.820000] roboswitch: Probing device eth3: No such device
[ 13.324000] wl: module license 'unspecified' taints kernel.
[ 13.332000] Disabling lock debugging due to kernel taint
[ 13.440000] SSB/BCMA glue driver successfully attached
[ 13.468000] Button Hotplug driver version 0.4.1
[ 13.516000] PPP generic driver version 2.4.2
[ 13.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.936000] NET: Registered protocol family 24
[ 13.968000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.336000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.612000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.400000] device eth0 entered promiscuous mode
[ 19.408000] br-lan: port 1(eth0) entered forwarding state
[ 19.412000] br-lan: port 1(eth0) entered forwarding state
[ 21.416000] br-lan: port 1(eth0) entered forwarding state
[ 29.760000] eth0: no IPv6 routers present
[ 36.576000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.592000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.596000] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 129.396000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 129.436000] done.
[ 129.440000] JFFS2 notice: (975) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[/spoiler]
Con este sí, funciona el wifi, me da la impresión de que la velocidad de transferencia, ha mejorado un poco, pero por el contrario, he perdido la conexión (vía wifi) un par de veces. Tendré que probarlo más a fondo.
El dmseg:
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Jul 2 23:35:47 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.164000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.400000] roboswitch: Probing device eth0:
[ 3.404000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.412000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.420000] roboswitch: Probing device eth1: No such device
[ 3.424000] roboswitch: Probing device eth2: No such device
[ 3.432000] roboswitch: Probing device eth3: No such device
[ 12.036000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.044000] Backport based on wireless-testing.git master-2012-06-14
[ 12.052000] compat.git: wireless-testing.git
[ 12.112000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.116000] cfg80211: World regulatory domain updated:
[ 12.124000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.132000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.140000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.148000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.156000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.164000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.552000] NET: Registered protocol family 10
[ 12.972000] SCSI subsystem initialized
[ 13.020000] There is already a switch registered on the device 'eth0'
[ 13.028000] roboswitch: Probing device eth1: No such device
[ 13.032000] roboswitch: Probing device eth2: No such device
[ 13.040000] roboswitch: Probing device eth3: No such device
[ 13.312000] usbcore: registered new interface driver usbfs
[ 13.320000] usbcore: registered new interface driver hub
[ 13.328000] usbcore: registered new device driver usb
[ 13.840000] Button Hotplug driver version 0.4.1
[ 14.004000] PPP generic driver version 2.4.2
[ 14.448000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.800000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.808000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.952000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.424000] NET: Registered protocol family 24
[ 15.736000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.776000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.676000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.984000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.032000] Initializing USB Mass Storage driver...
[ 17.036000] usbcore: registered new interface driver usb-storage
[ 17.044000] USB Mass Storage support registered.
[ 17.208000] usbcore: registered new interface driver ums-alauda
[ 17.236000] usbcore: registered new interface driver ums-cypress
[ 17.268000] usbcore: registered new interface driver ums-datafab
[ 17.296000] usbcore: registered new interface driver ums-freecom
[ 17.324000] usbcore: registered new interface driver ums-isd200
[ 17.356000] usbcore: registered new interface driver ums-jumpshot
[ 17.384000] usbcore: registered new interface driver ums-karma
[ 17.412000] usbcore: registered new interface driver ums-sddr09
[ 17.444000] usbcore: registered new interface driver ums-sddr55
[ 17.616000] usbcore: registered new interface driver ums-usbat
[ 17.644000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 22.780000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 22.788000] device eth0 entered promiscuous mode
[ 22.796000] br-lan: port 1(eth0) entered forwarding state
[ 22.800000] br-lan: port 1(eth0) entered forwarding state
[ 24.804000] br-lan: port 1(eth0) entered forwarding state
[ 33.376000] eth0: no IPv6 routers present
[ 42.968000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 42.984000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 42.988000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 139.168000] JFFS2 notice: (1053) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 152.724000] dummy
[ 152.728000] dummy
[ 152.728000] dummy
[ 152.732000] dummy
[ 152.732000] dummy
[ 152.736000] dummy
[ 152.736000] dummy
[ 152.740000] dummy
[ 152.740000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 152.748000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 152.844000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 154.524000] dummy
[ 154.524000] dummy
[ 154.528000] dummy
[ 154.528000] dummy
[ 154.532000] dummy
[ 154.532000] dummy
[ 154.536000] dummy
[ 154.540000] dummy
[ 154.540000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 154.548000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 154.596000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 156.276000] dummy
[ 156.276000] dummy
[ 156.280000] dummy
[ 156.280000] dummy
[ 156.284000] dummy
[ 156.284000] dummy
[ 156.288000] dummy
[ 156.288000] dummy
[ 156.292000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 156.300000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 156.356000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 168.216000] dummy
[ 168.216000] dummy
[ 168.220000] dummy
[ 168.220000] dummy
[ 168.224000] dummy
[ 168.224000] dummy
[ 168.228000] dummy
[ 168.232000] dummy
[ 168.232000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 168.240000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 168.288000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 196.984000] dummy
[ 196.984000] dummy
[ 196.988000] dummy
[ 196.988000] dummy
[ 196.992000] dummy
[ 196.992000] dummy
[ 196.996000] dummy
[ 196.996000] dummy
[ 197.000000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 197.008000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 197.044000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 225.400000] dummy
[ 225.404000] dummy
[ 225.404000] dummy
[ 225.408000] dummy
[ 225.408000] dummy
[ 225.412000] dummy
[ 225.412000] dummy
[ 225.416000] dummy
[ 225.416000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 225.424000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 225.476000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 230.296000] dummy
[ 230.300000] dummy
[ 230.304000] dummy
[ 230.304000] dummy
[ 230.308000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 230.316000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 230.324000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 230.336000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 233.640000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[/spoiler]
No sé qué narices me ha pasado al compilar el firmware que el driver del wifi no se ha instalado -.-...
Firmware compilado de nuevo: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_wl.bin
Saludos!
Probado.En concreto sigue sin aparecer ningún rastro de BCMA por ningún lado. Esto me lleva a pensar que después del backport de Hauke del BCMA/SSB tengo que añadir nuevos parámetros a la configuración de linux para que funcione.
Sigue sin aparece el wifi por ningún lado :-[
dmesg
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Tue Jul 3 22:51:58 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.404000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.488000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.664000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 2.800000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.020000] roboswitch: Probing device eth0:
[ 3.024000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.032000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.040000] roboswitch: Probing device eth1: No such device
[ 3.044000] roboswitch: Probing device eth2: No such device
[ 3.052000] roboswitch: Probing device eth3: No such device
[ 11.728000] NET: Registered protocol family 10
[ 11.792000] There is already a switch registered on the device 'eth0'
[ 11.800000] roboswitch: Probing device eth1: No such device
[ 11.804000] roboswitch: Probing device eth2: No such device
[ 11.812000] roboswitch: Probing device eth3: No such device
[ 13.328000] wl: module license 'unspecified' taints kernel.
[ 13.332000] Disabling lock debugging due to kernel taint
[ 13.440000] SSB/BCMA glue driver successfully attached
[ 13.468000] Button Hotplug driver version 0.4.1
[ 13.516000] PPP generic driver version 2.4.2
[ 13.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.940000] NET: Registered protocol family 24
[ 13.976000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.344000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.624000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.316000] device eth0 entered promiscuous mode
[ 19.320000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.332000] br-lan: port 1(eth0) entered forwarding state
[ 19.336000] br-lan: port 1(eth0) entered forwarding state
[ 21.340000] br-lan: port 1(eth0) entered forwarding state
[ 29.360000] eth0: no IPv6 routers present
[ 36.612000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.628000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.632000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 128.760000] JFFS2 notice: (975) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[/spoiler]
En concreto sigue sin aparecer ningún rastro de BCMA por ningún lado. Esto me lleva a pensar que después del backport de Hauke del BCMA/SSB tengo que añadir nuevos parámetros a la configuración de linux para que funcione.
Por eso he editado la configuración basada en la existente para BCM47xx yestoy generando un firmware nuevoque sí que debería funcionar. Lo siento por todas estas pruebas inútiles que os hayan hecho perder el tiempo :$...
EDIT: Firmware -> https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_wl_bcma_parms.bin
Saludos.
Probado, el wifi sigue sin aparecer :-[Pero en este sí que funciona el BCMA:
dmesg
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Wed Jul 4 13:41:49 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a5a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29376k/32768k available (2248k kernel code, 3392k reserved, 400k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.352000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: PMU resource config unknown or not needed for device 0xA8D9
[ 0.376000] bcma: Workarounds unknown or not needed for device 0xA8D9
[ 0.408000] bcma: SPROM offset 0x800
[ 0.448000] bcma: Using SPROM revision 8 provided by platform.
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 2.924000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.144000] roboswitch: Probing device eth0:
[ 3.148000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.156000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.164000] roboswitch: Probing device eth1: No such device
[ 3.168000] roboswitch: Probing device eth2: No such device
[ 3.176000] roboswitch: Probing device eth3: No such device
[ 11.888000] NET: Registered protocol family 10
[ 11.952000] There is already a switch registered on the device 'eth0'
[ 11.960000] roboswitch: Probing device eth1: No such device
[ 11.968000] roboswitch: Probing device eth2: No such device
[ 11.972000] roboswitch: Probing device eth3: No such device
[ 13.480000] wl: module license 'unspecified' taints kernel.
[ 13.484000] Disabling lock debugging due to kernel taint
[ 13.592000] SSB/BCMA glue driver successfully attached
[ 13.620000] Button Hotplug driver version 0.4.1
[ 13.668000] PPP generic driver version 2.4.2
[ 13.892000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.088000] NET: Registered protocol family 24
[ 14.124000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.488000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.768000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.488000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.496000] device eth0 entered promiscuous mode
[ 19.504000] br-lan: port 1(eth0) entered forwarding state
[ 19.508000] br-lan: port 1(eth0) entered forwarding state
[ 21.512000] br-lan: port 1(eth0) entered forwarding state
[ 30.176000] eth0: no IPv6 routers present
[ 36.360000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.368000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.372000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 128.284000] JFFS2 notice: (996) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[/spoiler]
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0AEsto puede indicar que el driver wl no lo está detectando correctamente.
[ 0.352000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: PMU resource config unknown or not needed for device 0xA8D9
[ 0.376000] bcma: Workarounds unknown or not needed for device 0xA8D9
[ 0.408000] bcma: SPROM offset 0x800
[ 0.448000] bcma: Using SPROM revision 8 provided by platform.
[ 0.448000] bcma: Bus registered
Esto puede indicar que el driver wl no lo está detectando correctamente.
Voy a recompilar el firmware con brcsmac a ver si así sí funciona (no habíamos confirmado antes que con broadcom wl funcionara, pero sí con brcmsmac)...
Firmware: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcsmac.bin
Un rápido vistazo al driver wl me da que pensar que la versión que utiliza openwrt no soporta el 43225 usado por este dispositivo xDDD.
Saludos!
Queda claro entonces que no se puede usar el driver broadcom wl, puesto que la versión que hay en Openwrt es demasiado antigua para soportar el 43225.CitarEsto puede indicar que el driver wl no lo está detectando correctamente.
Voy a recompilar el firmware con brcsmac a ver si así sí funciona (no habíamos confirmado antes que con broadcom wl funcionara, pero sí con brcmsmac)...
Firmware: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcsmac.bin
Un rápido vistazo al driver wl me da que pensar que la versión que utiliza openwrt no soporta el 43225 usado por este dispositivo xDDD.
Saludos!
Volvemos a tener wifi ;D ;D ;D
dmesg
[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Wed Jul 4 15:25:23 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a5a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29376k/32768k available (2248k kernel code, 3392k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: PMU resource config unknown or not needed for device 0xA8D9
[ 0.376000] bcma: Workarounds unknown or not needed for device 0xA8D9
[ 0.408000] bcma: SPROM offset 0x800
[ 0.448000] bcma: Using SPROM revision 8 provided by platform.
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.804000] Freeing unused kernel memory: 200k freed
[ 3.332000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.388000] roboswitch: Probing device eth0:
[ 3.392000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.404000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.408000] roboswitch: Probing device eth1: No such device
[ 3.416000] roboswitch: Probing device eth2: No such device
[ 3.420000] roboswitch: Probing device eth3: No such device
[ 9.424000] JFFS2 notice: (345) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 2 orphan) found.
[ 12.216000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.224000] Backport based on wireless-testing.git master-2012-06-14
[ 12.228000] compat.git: wireless-testing.git
[ 12.288000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.292000] cfg80211: World regulatory domain updated:
[ 12.300000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.308000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.316000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.324000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.332000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.340000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.736000] NET: Registered protocol family 10
[ 12.840000] There is already a switch registered on the device 'eth0'
[ 12.848000] roboswitch: Probing device eth1: No such device
[ 12.856000] roboswitch: Probing device eth2: No such device
[ 12.860000] roboswitch: Probing device eth3: No such device
[ 13.260000] Button Hotplug driver version 0.4.1
[ 13.424000] PPP generic driver version 2.4.2
[ 13.860000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.224000] bcma: Switched to core: 0x812
[ 14.224000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.232000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.248000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.452000] NET: Registered protocol family 24
[ 14.488000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.868000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.156000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.492000] device eth0 entered promiscuous mode
[ 19.500000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.512000] br-lan: port 1(eth0) entered forwarding state
[ 19.516000] br-lan: port 1(eth0) entered forwarding state
[ 21.520000] br-lan: port 1(eth0) entered forwarding state
[ 21.628000] dummy
[ 21.628000] dummy
[ 21.632000] dummy
[ 21.632000] dummy
[ 21.636000] dummy
[ 21.636000] dummy
[ 21.640000] dummy
[ 21.640000] dummy
[ 21.644000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 21.652000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 21.716000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.152000] dummy
[ 25.156000] dummy
[ 25.160000] dummy
[ 25.160000] dummy
[ 25.164000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 25.172000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 25.180000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 25.188000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.140000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 30.168000] eth0: no IPv6 routers present
[ 35.888000] wlan0: no IPv6 routers present
[/spoiler]
Ahora queda probarlo y ver si hay diferencia de rendimiento ;)
Le he preguntado a Hauke sobre el parche al BCMA para que detecte la fallback sprom. Me ha pedido que recupere un par de valores del BCMA.
Para esto necesito que alguno pruebe este firmware, que es exactamente idéntico al anterior pero con los debugs.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe.bin
Saludos!
Queda claro entonces que no se puede usar el driver broadcom wl, puesto que la versión que hay en Openwrt es demasiado antigua para soportar el 43225.
Así pues quedan dos alternativas: Usar brcmsmac (la última versión lo incluye). O usar b43.
El problema de brcmsmac es que habéis comentado que su rendimiento no es adecuado y produce cortes.
El problema de b43 es que no soporta Wifi N (el wifi queda limitado a b/g).
No sé si hay alguna forma de actualizar el driver wl en openwrt, si alguien sabe algo al respecto, nos vendría bien algo de luz ;).
Saludos!
Para esto necesito que alguno pruebe este firmware, que es exactamente idéntico al anterior pero con los debugs.
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe.bin
Saludos!
BuenasEl wifi es normal que vaya mal. El driver b43 no está muy pulido y mucho menos el brcsmac. El mejor driver sería el propietario (broadcom-wl), pero openwrt utiliza una versión antigua que no es compatible con el wifi de este router...
Como va el tema del wifi? se ha solucionado algo Noltari? el usb ya funicona con los modificaciones que has echo?
Tengo el router con una firm de los primeros que colgaste y el wifi falla de vez en cuando, es para esperarme a actualizar o pongo el ultimo con los debusg
Salu2
Probado.Pues no, no ha habido mucha mejora :P.
Test de velocidad con el anterior firmware
(http://www.speedtest.net/result/2070788339.png)
Test de velocidad con el nuevo firmware
(http://www.speedtest.net/result/2070885884.png)
Las diferencias son tan pequeñas, que no creo que se puedan deber al driver (ganamos en subida y bajada, pero perdemos en ping).
Por otro lado, no estaba instalado wpa-supplicant ni hostapd, por lo que no conseguía conectar de ninguna manera (ni siquiera con la red de mi amigo y vecino con clave wep). Fue instalar ambos y 'mano de santo' ;D
Test de velocidad con el hg556a. Como se puede ver, la velocidad de bajada es casi el doble ;D
(http://www.speedtest.net/result/2070906757.png)
Te he mandado los log a tu e-mail, que últimamente está saliendo demasiada info (aunque oculta) en mis dmesg's :D
Voy a probar el nuevo firm del ar5387un ;)
Nuevo firmware, con los últimos parches cambiados por enésima vez realizando los ajustes que jogo me ha pedido...Actualizado firmware sin soporte USB.
https://dl.dropbox.com/u/4708147/openwrt/6328/openwrt-963281T_TEF-generic-squashfs-cfe_r32934.bin
Actualizados también los parches SVN a la última versión:
https://dl.dropbox.com/u/4708147/openwrt/6328/6328_svn.patch
Saludos.
EDIT: Ups, copy&paste fail, había puesto el firmware del Comtrend AR5387un xD...
EDIT2: Actualizado firmware sin soporte USB, ya que bloqueaba el inicio.
Yo ya tengo el serial >:(Esperando noticias :P.
Pero como soy un 'negao' pa las soldaduras y esas cosas, estoy a la espera de que un amiguete me haga el trabajo sucio ^-^
Luego a recuperar el router, y seguir con las pruebas ;)
Yo sigo a la espera de que mi amigo me devuelva el router con las soldaduras hechas :-\Espero que consigas arrojar algo de luz al asunto. Aver si hay suerte :P.
Lo que está claro es que los ADB se quedan 'fritos' con bastante facilidad :P
Enviado desde mi U30GT
Por fín, el amiguete me ha devuelto el router.Me huele a que cierta configuración en el router está causando una excepción. Básicamente digo esto porque la excepción salta en el init, pero sin embargo, el preinit carga perfectamente. Cuando tenga tiempo le echaré un ojo.
Antes de intentar nada, posteo el bootlog.
A ver si los expertos en cables y esas cosas, aparecen por aquí ^-^
[spoiler]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.09.12 12:11:34 =~=~=~=~=~=~=~=~=~=~=~=
HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN
CFE version 1.0.37-106.24 for [1mA4001N TEF[0m [43m0002[0m BCM96328 (32bit,SP,BE)
Build Date: Wed Jan 26 12:59:25 CET 2011 (zu1costast@thorold)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name MX25L128, id 0xc218 size 16384KB
Total Flash size: 16384K with 4096 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 33554432 bytes (32MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-4) : 963281T_TEF
Number of MAC Addresses (1-32) : 11
Base MAC Address : 30:39:f2:83:c8:a5
PSI Size (1-64) KBytes : 24
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
Voice Board Configuration (0-11) :
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 110
Booting from only image (0xb8010000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x80010000
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Wed Jul 18 16:34:38 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29376k/32768k available (2248k kernel code, 3392k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.352000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.452000] bcma: bus0: Bus registered
[ 0.456000] NET: Registered protocol family 2
[ 0.460000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.468000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.476000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.488000] TCP reno registered
[ 0.492000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.496000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] NET: Registered protocol family 1
[ 0.512000] audit: initializing netlink socket (disabled)
[ 0.516000] type=2000 audit(0.516:1): initialized
[ 0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.532000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.540000] msgmni has been set to 57
[ 0.544000] io scheduler noop registered
[ 0.548000] io scheduler deadline registered (default)
[ 0.556000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
Š[ 0.564000] console [ttyS0] enabled, bootconsole disabled
[ 0.564000] console [ttyS0] enabled, bootconsole disabled
[ 0.580000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.588000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.592000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.600000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.608000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.616000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.624000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.628000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.636000] bcm63xxpart: Spare partition is offset 2c0004 and length d2fffc
[ 0.644000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.652000] Creating 5 MTD partitions on "spi0.0":
[ 0.656000] 0x000000000000-0x000000010000 : "CFE"
[ 0.664000] 0x000000010100-0x000000100000 : "kernel"
[ 0.668000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.684000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.692000] mtd: partition "rootfs" set to be root filesystem
[ 0.696000] mtd: partition "rootfs_data" created automatically, ofs=2C0000, len=D30000
[ 0.708000] 0x0000002c0000-0x000000ff0000 : "rootfs_data"
[ 0.716000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.724000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.764000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.780000] TCP cubic registered
[ 0.784000] NET: Registered protocol family 17
[ 0.788000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
awk: /proc/cpuinfo: No such file or directory
[ 3.400000] roboswitch: Probing device eth0:
[ 3.404000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.412000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.416000] roboswitch: Probing device eth1: No such device
[ 3.424000] roboswitch: Probing device eth2: No such device
[ 3.428000] roboswitch: Probing device eth3: No such device
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[ 9.448000] JFFS2 notice: (347) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 28 of xref (0 dead, 23 orphan) found.
switching to jffs2
- init -
Please press Enter to activate this console. [ 12.772000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 81f8c304, ra == 80041a98
[ 12.784000] Oops[#1]:
[ 12.784000] Cpu 0
[ 12.784000] $ 0 : 00000000 10008400 00000000 00000002
[ 12.784000] $ 4 : 00000000 000080d0 81f9f920 ffffffff
[ 12.784000] $ 8 : 00000001 00000000 00000000 00000000
[ 12.784000] $12 : 00000000 00000031 00000000 00000000
[ 12.784000] $16 : 81f9f920 00000001 81f90000 00000000
[ 12.784000] $20 : 00000000 802e0000 802a0000 80245814
[ 12.784000] $24 : 00000000 8001e230
[ 12.784000] $28 : 81f7c000 81f7dd48 80245834 80041a98
[ 12.784000] Hi : 00000000
[ 12.784000] Lo : 0000002c
[ 12.784000] epc : 81f8c304 0x81f8c304
[ 12.784000] Tainted: G O
[ 12.784000] ra : 80041a98 0x80041a98
[ 12.784000] Status: 10008403 KERNEL EXL IE
[ 12.784000] Cause : 00800008
[ 12.784000] BadVA : 00000000
[ 12.784000] PrId : 0002a075 (Broadcom BMIPS4350)
[ 12.784000] Modules linked in: aes_generic(+) crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi switch_adm(O) switch_core(O)
[ 12.784000] Process insmod (pid: 405, threadinfo=81f7c000, task=81f489f8, tls=77dfb440)
[ 12.784000] Stack : 802a0000 800df39c 81f1e680 81f94b80 ffffffff 00000001 81f9f920 00000000
[ 12.784000] 00000000 802e0000 802a0000 80245814 80245834 80041a98 00000000 00000000
[ 12.784000] 00000001 00000000 00000000 00000001 81f9f920 ffffffff 8029ea30 80041d40
[ 12.784000] 10008401 00000000 81c6b440 81ec7200 00000000 81ec722c 802a0000 00000001
[ 12.784000] 81f9f920 00000000 802a0000 80041d84 81f9f948 80108d3c 00000000 801cf538
[ 12.784000] ...
[ 12.784000] Call Trace:[<800df39c>] 0x800df39c
[ 12.784000] [<80041a98>] 0x80041a98
[ 12.784000] [<80041d40>] 0x80041d40
[ 12.784000] [<80041d84>] 0x80041d84
[ 12.784000] [<80108d3c>] 0x80108d3c
[ 12.784000] [<801cf538>] 0x801cf538
[ 12.784000] [<8010965c>] 0x8010965c
[ 12.784000] [<81f88ff0>] 0x81f88ff0
[ 12.784000] [<81f89348>] 0x81f89348
[ 12.784000] [<81f89658>] 0x81f89658
[ 12.784000] [<81f97000>] 0x81f97000
[ 12.784000] [<80010900>] 0x80010900
[ 12.784000] [<80088e18>] 0x80088e18
[ 12.784000] [<80041d84>] 0x80041d84
[ 12.784000] [<80056344>] 0x80056344
[ 12.784000] [<8001a6d0>] 0x8001a6d0
[ 12.784000] [<80125f38>] 0x80125f38
[ 12.784000]
[ 12.784000]
[ 12.784000] Code: 2642c5e0 8c420140 340580d0 <8c430000> 24630001 ac430000 3c02802a 0c023f75 8c44da24
[ 13.004000] ---[ end trace a25b18ee5bd1b876 ]---
[ 13.032000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 81f8c304, ra == 80041a98
[ 13.044000] Oops[#2]:
[ 13.044000] Cpu 0
[ 13.044000] $ 0 : 00000000 10008400 00000000 00000002
[ 13.044000] $ 4 : 00000000 000080d0 81ec10f0 ffffffff
[ 13.044000] $ 8 : 00000001 00000000 00000000 00000000
[ 13.044000] $12 : 00000000 00000031 81024480 00000000
[ 13.044000] $16 : 81ec10f0 00000001 81f90000 00000000
[ 13.044000] $20 : 00000000 802e0000 802a0000 80245814
[ 13.044000] $24 : 00000000 8001e230
[ 13.044000] $28 : 81f76000 81f77d48 80245834 80041a98
[ 13.044000] Hi : 00000000
[ 13.044000] Lo : 00000000
[ 13.044000] epc : 81f8c304 0x81f8c304
[ 13.044000] Tainted: G D O
[ 13.044000] ra : 80041a98 0x80041a98
[ 13.044000] Status: 10008403 KERNEL EXL IE
[ 13.044000] Cause : 00800008
[ 13.044000] BadVA : 00000000
[ 13.044000] PrId : 0002a075 (Broadcom BMIPS4350)
[ 13.044000] Modules linked in: arc4(+) aes_generic(+) crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi switch_adm(O) switch_core(O)
[ 13.044000] Process insmod (pid: 406, threadinfo=81f76000, task=81d1c510, tls=77873440)
[ 13.044000] Stack : 802a0000 800df39c 81f1e3b0 81f94780 ffffffff 00000001 81ec10f0 00000000
[ 13.044000] 00000000 802e0000 802a0000 80245814 80245834 80041a98 00000000 00000000
[ 13.044000] 00000001 00000000 00000000 00000001 81ec10f0 ffffffff 8029ea30 80041d40
[ 13.044000] 10008401 00000000 81c6b440 81ec7200 00000000 81ec722c 802a0000 00000001
[ 13.044000] 81ec10f0 00000000 802a0000 80041d84 81ec1118 80108d3c 00000000 801cf538
[ 13.044000] ...
[ 13.044000] Call Trace:[<800df39c>] 0x800df39c
[ 13.044000] [<80041a98>] 0x80041a98
[ 13.044000] [<80041d40>] 0x80041d40
[ 13.044000] [<80041d84>] 0x80041d84
[ 13.044000] [<80108d3c>] 0x80108d3c
[ 13.044000] [<801cf538>] 0x801cf538
[ 13.044000] [<8010965c>] 0x8010965c
[ 13.044000] [<81f88ff0>] 0x81f88ff0
[ 13.044000] [<81f89348>] 0x81f89348
[ 13.044000] [<81f89658>] 0x81f89658
[ 13.044000] [<81f78000>] 0x81f78000
[ 13.044000] [<80010900>] 0x80010900
[ 13.044000] [<80088e18>] 0x80088e18
[ 13.044000] [<80041d84>] 0x80041d84
[ 13.044000] [<80056344>] 0x80056344
[ 13.044000] [<8001a6d0>] 0x8001a6d0
[ 13.044000] [<81f89434>] 0x81f89434
[ 13.044000] [<80108d84>] 0x80108d84
[ 13.044000]
[ 13.044000]
[ 13.044000] Code: 2642c5e0 8c420140 340580d0 <8c430000> 24630001 ac430000 3c02802a 0c023f75 8c44da24
[ 13.268000] ---[ end trace a25b18ee5bd1b877 ]---
[ 13.316000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 81f8c304, ra == 80041a98
[ 13.324000] Oops[#3]:
[ 13.324000] Cpu 0
[ 13.324000] $ 0 : 00000000 10008400 00000000 00000002
[ 13.324000] $ 4 : 00000000 000080d0 81fa4a20 ffffffff
[ 13.324000] $ 8 : 00000001 00000000 00000000 00000000
[ 13.324000] $12 : 00000000 81f8ef90 00000050 00000000
[ 13.324000] $16 : 81fa4a20 00000001 81f90000 00000000
[ 13.324000] $20 : 00000000 802e0000 802a0000 80245814
[ 13.324000] $24 : 00000000 8001e230
[ 13.324000] $28 : 81f7c000 81f7dd28 80245834 80041a98
[ 13.324000] Hi : 00000000
[ 13.324000] Lo : 0000002c
[ 13.324000] epc : 81f8c304 0x81f8c304
[ 13.324000] Tainted: G D O
[ 13.324000] ra : 80041a98 0x80041a98
[ 13.324000] Status: 10008403 KERNEL EXL IE
[ 13.324000] Cause : 00800008
[ 13.324000] BadVA : 00000000
[ 13.324000] PrId : 0002a075 (Broadcom BMIPS4350)
[ 13.324000] Modules linked in: des_generic(+) arc4(+) aes_generic(+) crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi switch_adm(O) switch_core(O)
[ 13.324000] Process insmod (pid: 407, threadinfo=81f7c000, task=81f489f8, tls=7793f440)
[ 13.324000] Stack : 00000000 80044c30 81f2c5b0 802a0000 ffffffff 00000001 81fa4a20 00000000
[ 13.324000] 00000000 802e0000 802a0000 80245814 80245834 80041a98 00000001 8003c5a4
[ 13.324000] 000041ed 800ded58 00000000 00000001 81fa4a20 ffffffff 8029ea30 80041d40
[ 13.324000] 00000001 00000000 10008401 81c6b440 00000000 81ec7200 802a0000 00000001
[ 13.324000] 81fa4a20 00000000 802a0000 80041d84 81fa4a48 80108d3c 00000001 80043e70
[ 13.324000] ...
[ 13.324000] Call Trace:[<80044c30>] 0x80044c30
[ 13.324000] [<80041a98>] 0x80041a98
[ 13.324000] [<8003c5a4>] 0x8003c5a4
[ 13.324000] [<800ded58>] 0x800ded58
[ 13.324000] [<80041d40>] 0x80041d40
[ 13.324000] [<80041d84>] 0x80041d84
[ 13.324000] [<80108d3c>] 0x80108d3c
[ 13.324000] [<80043e70>] 0x80043e70
[ 13.324000] [<801a6534>] 0x801a6534
[ 13.324000] [<8010965c>] 0x8010965c
[ 13.324000] [<81f88ff0>] 0x81f88ff0
[ 13.324000] [<81f89348>] 0x81f89348
[ 13.324000] [<81f89658>] 0x81f89658
[ 13.324000] [<81fa0000>] 0x81fa0000
[ 13.324000] [<81fa501c>] 0x81fa501c
[ 13.324000] [<81fa5000>] 0x81fa5000
[ 13.324000] [<80010900>] 0x80010900
[ 13.324000] [<80088e18>] 0x80088e18
[ 13.324000] [<80041d84>] 0x80041d84
[ 13.324000] [<80056344>] 0x80056344
[ 13.324000] [<8008346c>] 0x8008346c
[ 13.324000] [<8001a6d0>] 0x8001a6d0
[ 13.324000]
[ 13.324000]
[ 13.324000] Code: 2642c5e0 8c420140 340580d0 <8c430000> 24630001 ac430000 3c02802a 0c023f75 8c44da24
[ 13.568000] ---[ end trace a25b18ee5bd1b878 ]---
[ 13.772000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 81f8c304, ra == 80041a98
[ 13.784000] Oops[#4]:
[ 13.784000] Cpu 0
[ 13.784000] $ 0 : 00000000 10008400 00000000 00000002
[ 13.784000] $ 4 : 00000000 000080d0 81fa9b6c ffffffff
[ 13.784000] $ 8 : 00000001 00000000 00000000 00000000
[ 13.784000] $12 : 00000000 00000031 81025f80 00000000
[ 13.784000] $16 : 81fa9b6c 00000001 81f90000 00000000
[ 13.784000] $20 : 00000000 802e0000 802a0000 80245814
[ 13.784000] $24 : 00000000 8001e230
[ 13.784000] $28 : 81fa6000 81fa7d48 80245834 80041a98
[ 13.784000] Hi : 00000000
[ 13.784000] Lo : 0000002c
[ 13.784000] epc : 81f8c304 0x81f8c304
[ 13.784000] Tainted: G D O
[ 13.784000] ra : 80041a98 0x80041a98
[ 13.784000] Status: 10008403 KERNEL EXL IE
[ 13.784000] Cause : 00800008
[ 13.784000] BadVA : 00000000
[ 13.784000] PrId : 0002a075 (Broadcom BMIPS4350)
[ 13.784000] Modules linked in: md4(+) hmac ecb des_generic(+) arc4(+) aes_generic(+) crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi switch_adm(O) switch_core(O)
[ 13.784000] Process insmod (pid: 410, threadinfo=81fa6000, task=81d1c510, tls=77ca4440)
[ 13.784000] Stack : 802a0000 800df39c 81f8e6d0 81f8b680 ffffffff 00000001 81fa9b6c 00000000
[ 13.784000] 00000000 802e0000 802a0000 80245814 80245834 80041a98 00000000 00000000
[ 13.784000] 00000001 00000000 00000000 00000001 81fa9b6c ffffffff 8029ea30 80041d40
[ 13.784000] 10008401 00000000 81c6b440 81ec7200 00000000 81ec722c 802a0000 00000001
[ 13.784000] 81fa9b6c 00000000 802a0000 80041d84 81fa9b94 80108d3c 00000000 801cf538
[ 13.784000] ...
[ 13.784000] Call Trace:[<800df39c>] 0x800df39c
[ 13.784000] [<80041a98>] 0x80041a98
[ 13.784000] [<80041d40>] 0x80041d40
[ 13.784000] [<80041d84>] 0x80041d84
[ 13.784000] [<80108d3c>] 0x80108d3c
[ 13.784000] [<801cf538>] 0x801cf538
[ 13.784000] [<8010965c>] 0x8010965c
[ 13.784000] [<81f88ff0>] 0x81f88ff0
[ 13.784000] [<81f89348>] 0x81f89348
[ 13.784000] [<81f89658>] 0x81f89658
[ 13.784000] [<81faa000>] 0x81faa000
[ 13.784000] [<80010900>] 0x80010900
[ 13.784000] [<80088e18>] 0x80088e18
[ 13.784000] [<80041d84>] 0x80041d84
[ 13.784000] [<80056344>] 0x80056344
[ 13.784000] [<8001a6d0>] 0x8001a6d0
[ 13.784000]
[ 13.784000]
[ 13.784000] Code: 2642c5e0 8c420140 340580d0 <8c430000> 24630001 ac430000 3c02802a 0c023f75 8c44da24
[ 14.004000] ---[ end trace a25b18ee5bd1b879 ]---
[ 14.036000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 81f8c304, ra == 80041a98
[ 14.044000] Oops[#5]:
[ 14.044000] Cpu 0
[ 14.044000] $ 0 : 00000000 10008400 00000000 00000002
[ 14.044000] $ 4 : 00000000 000080d0 81f8f41c ffffffff
[ 14.044000] $ 8 : 00000001 00000000 00000000 00000000
[ 14.044000] $12 : 00000000 00000031 81007220 00000000
[ 14.044000] $16 : 81f8f41c 00000001 81f90000 00000000
[ 14.044000] $20 : 00000000 802e0000 802a0000 80245814
[ 14.044000] $24 : 00000000 8001e230
[ 14.044000] $28 : 81c88000 81c89d48 80245834 80041a98
[ 14.044000] Hi : 00000000
[ 14.044000] Lo : 00000000
[ 14.044000] epc : 81f8c304 0x81f8c304
[ 14.044000] Tainted: G D O
[ 14.044000] ra : 80041a98 0x80041a98
[ 14.044000] Status: 10008403 KERNEL EXL IE
[ 14.044000] Cause : 00800008
[ 14.044000] BadVA : 00000000
[ 14.044000] PrId : 0002a075 (Broadcom BMIPS4350)
[ 14.044000] Modules linked in: md5(+) md4(+) hmac ecb des_generic(+) arc4(+) aes_generic(+) crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi switch_adm(O) switch_core(O)
[ 14.044000] Process insmod (pid: 411, threadinfo=81c88000, task=81f489f8, tls=77fd7440)
[ 14.044000] Stack : 00000000 10008401 00008000 80013864 ffffffff 00000001 81f8f41c 00000000
[ 14.044000] 00000000 802e0000 802a0000 80245814 80245834 80041a98 00000000 00000000
[ 14.044000] 00001000 ffffffe0 00000000 00000001 81f8f41c ffffffff 8029ea30 80041d40
[ 14.044000] 10008401 00000000 81c6b440 81ec7200 00000000 81ec722c 802a0000 00000001
[ 14.044000] 81f8f41c 00000000 802a0000 80041d84 81f8f444 80108d3c 00000000 801cf538
[ 14.044000] ...
[ 14.044000] Call Trace:[<80013864>] 0x80013864
[ 14.044000] [<80041a98>] 0x80041a98
[ 14.044000] [<80041d40>] 0x80041d40
[ 14.044000] [<80041d84>] 0x80041d84
[ 14.044000] [<80108d3c>] 0x80108d3c
[ 14.044000] [<801cf538>] 0x801cf538
[ 14.044000] [<8010965c>] 0x8010965c
[ 14.044000] [<81f88ff0>] 0x81f88ff0
[ 14.044000] [<81f89348>] 0x81f89348
[ 14.044000] [<81f89658>] 0x81f89658
[ 14.044000] [<81fab000>] 0x81fab000
[ 14.044000] [<80010900>] 0x80010900
[ 14.044000] [<80088e18>] 0x80088e18
[ 14.044000] [<80041d84>] 0x80041d84
[ 14.044000] [<80056344>] 0x80056344
[ 14.044000] [<8001a6d0>] 0x8001a6d0
[ 14.044000]
[ 14.044000]
[ 14.044000] Code: 2642c5e0 8c420140 340580d0 <8c430000> 24630001 ac430000 3c02802a 0c023f75 8c44da24
[ 14.268000] ---[ end trace a25b18ee5bd1b87a ]---
[ 14.324000] Compat-wireless backport release: compat-wireless-2012-07-13
[ 14.328000] Backport based on wireless-testing.git master-2012-07-16
[ 14.336000] compat.git: wireless-testing.git
[ 14.400000] cfg80211: Calling CRDA to update world regulatory domain
[ 14.404000] cfg80211: World regulatory domain updated:
[ 14.412000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.420000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.428000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.436000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.444000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.452000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.852000] NET: Registered protocol family 10
[ 15.000000] There is already a switch registered on the device 'eth0'
[ 15.008000] roboswitch: Probing device eth1: No such device
[ 15.012000] roboswitch: Probing device eth2: No such device
[ 15.016000] roboswitch: Probing device eth3: No such device
[ 15.456000] Button Hotplug driver version 0.4.1
[ 15.972000] PPP generic driver version 2.4.2
[ 16.420000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 16.752000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.876000] bcma: bus0: Switched to core: 0x812
[ 17.028000] NET: Registered protocol family 24
[ 17.064000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 17.480000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.796000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 22.116000] device eth0 entered promiscuous mode
[ 22.120000] br-lan: port 1(eth0) entered forwarding state
[ 22.128000] br-lan: port 1(eth0) entered forwarding state
[ 24.132000] br-lan: port 1(eth0) entered forwarding state
[ 24.220000] dummy
[ 24.220000] dummy
[ 24.224000] dummy
[ 24.224000] dummy
[ 24.228000] dummy
[ 24.228000] dummy
[ 24.232000] dummy
[ 24.232000] dummy
[ 24.236000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 24.244000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 24.304000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.144000] CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc == 814d00f8, ra == 814db834
[ 27.152000] Oops[#6]:
[ 27.152000] Cpu 0
[ 27.152000] $ 0 : 00000000 10008400 00000000 00000000
[ 27.152000] $ 4 : 00000000 00000000 00000000 ffffffff
[ 27.152000] $ 8 : 00000fff 00000001 00000000 000000f4
[ 27.152000] $12 : 00000000 00000003 00008000 00000000
[ 27.152000] $16 : 81c27ce8 00000000 816a4360 8153ca80
[ 27.152000] $20 : 816d76a0 00000000 814c733c 00000000
[ 27.152000] $24 : 00000000 800476f4
[ 27.152000] $28 : 81c26000 81c27c88 00000000 814db834
[ 27.152000] Hi : 00000000
[ 27.152000] Lo : 0000006c
[ 27.152000] epc : 814d00f8 0x814d00f8
[ 27.152000] Tainted: G D O
[ 27.152000] ra : 814db834 0x814db834
[ 27.152000] Status: 10008403 KERNEL EXL IE
[ 27.152000] Cause : 00800008
[ 27.152000] BadVA : 00000004
[ 27.152000] PrId : 0002a075 (Broadcom BMIPS4350)
[ 27.152000] Modules linked in: spi_bcm63xx gpio_keys_polled ip6t_REJECT ip6t_LOG ip6t_rt ip6t_hbh ip6t_mh ip6t_ipv6header ip6t_frag ip6t_eui64 ip6t_ah ip6table_raw ip6_queue ip6table_mangle ip6table_filter ip6_tables nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables brcmsmac(O) ppp_async ppp_generic slhc cifs button_hotplug(O) brcmutil(O) nls_utf8 mac80211(O) nls_base crc8 crc_ccitt cordic ipv6 input_polldev cfg80211(O) compat(O) input_core md5(+) md4(+) hmac ecb des_generic(+) arc4(+) aes_generic(+) crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi switch_adm(O) switch_core(O)
[ 27.152000] Process kworker/u:0 (pid: 5, threadinfo=81c26000, task=81c21470, tls=00000000)
[ 27.152000] Stack : 00000074 00000000 8158f478 8158f000 00000001 00000008 81c06380 801a0a4c
[ 27.152000] 816d76a0 81c27d60 8158ece4 8153ca80 81fe04a6 00000000 814c733c 00000000
[ 27.152000] 00000000 814db834 00000008 8143c093 8158ece4 814e1e80 8153ca80 00000000
[ 27.152000] 8153ca80 8158ece4 816a4810 816d76a0 ff000000 00ff0000 00000fff 00000000
[ 27.152000] 00000000 814dabac 816d76a0 00000000 00000001 00000000 816d76a0 8153ca80
[ 27.152000] ...
[ 27.152000] Call Trace:[<801a0a4c>] 0x801a0a4c
[ 27.152000] [<814c733c>] 0x814c733c
[ 27.152000] [<814db834>] 0x814db834
[ 27.152000] [<814e1e80>] 0x814e1e80
[ 27.152000] [<814dabac>] 0x814dabac
[ 27.152000] [<814c733c>] 0x814c733c
[ 27.152000] [<814dc974>] 0x814dc974
[ 27.152000] [<801a09b4>] 0x801a09b4
[ 27.152000] [<814de224>] 0x814de224
[ 27.152000] [<814c6aa8>] 0x814c6aa8
[ 27.152000] [<81637f64>] 0x81637f64
[ 27.152000] [<814df964>] 0x814df964
[ 27.152000] [<814c76dc>] 0x814c76dc
[ 27.152000] [<80046bc8>] 0x80046bc8
[ 27.152000] [<814c733c>] 0x814c733c
[ 27.152000] [<800375e0>] 0x800375e0
[ 27.152000] [<800476f4>] 0x800476f4
[ 27.152000] [<80038224>] 0x80038224
[ 27.152000] [<8023f68c>] 0x8023f68c
[ 27.152000] [<80037fc8>] 0x80037fc8
[ 27.152000] [<80037fc8>] 0x80037fc8
[ 27.152000] [<8003be30>] 0x8003be30
[ 27.152000] [<80015310>] 0x80015310
[ 27.152000] [<8003bda8>] 0x8003bda8
[ 27.152000] [<80015300>] 0x80015300
[ 27.152000]
[ 27.152000]
[ 27.152000] Code: 30420001 1440009e 8fbf0044 <8c820004> 8c840008 8c420024 0040f809 02003821 9295001c
[ 27.472000] ---[ end trace a25b18ee5bd1b87b ]---
[ 27.476000] Kernel panic - not syncing: Fatal exception in interrupt
[ 69.980000] bcm63xx_wdt fire[#7]:
[ 69.980000] Cpu 0
[ 69.980000] $ 0 : 00000000 10008401 0001032a 3bb3d000
[ 69.980000] $ 4 : 000003e8 00026d18 000000e9 ffffffff
[ 69.980000] $ 8 : 00000020 00000001 00000001 00000000
[ 69.980000] $12 : 00000000 00000000 00008000 00000000
[ 69.980000] $16 : 0000a604 00000001 802e0000 0000a668
[ 69.980000] $20 : 00000009 802e0000 00000000 00000000
[ 69.980000] $24 : 00000018 800476f4
[ 69.980000] $28 : 81c26000 81c27ab0 00030000 8023ba48
[ 69.980000] Hi : 00000000
[ 69.980000] Lo : 00026d18
[ 69.980000] epc : 80125840 0x80125840
[ 69.980000] Tainted: G D O
[ 69.980000] ra : 8023ba48 0x8023ba48
[ 69.980000] Status: 10008403 KERNEL EXL IE
[ 69.980000] Cause : 00800400
[ 69.980000] PrId : 0002a075 (Broadcom BMIPS4350)
[ 69.980000] Modules linked in: spi_bcm63xx gpio_keys_polled ip6t_REJECT ip6t_LOG ip6t_rt ip6t_hbh ip6t_mh ip6t_ipv6header ip6t_frag ip6t_eui64 ip6t_ah ip6table_raw ip6_queue ip6table_mangle ip6table_filter ip6_tables nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables brcmsmac(O) ppp_async ppp_generic slhc cifs button_hotplug(O) brcmutil(O) nls_utf8 mac80211(O) nls_base crc8 crc_ccitt cordic ipv6 input_polldev cfg80211(O) compat(O) input_core md5(+) md4(+) hmac ecb des_generic(+) arc4(+) aes_generic(+) crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi switch_adm(O) switch_core(O)
[ 69.980000] Process kworker/u:0 (pid: 5, threadinfo=81c26000, task=81c21470, tls=00000000)
[ 69.980000] Stack : 00000010 802e76e0 00000000 81c27aec 81c27aec 81c27ae8 0000000b 81c27bd8
[ 69.980000] 80259f74 81c27bd8 816d76a0 00000028 00000000 80017d60 00030000 802971c4
[ 69.980000] ffffffff 8015aab0 00000002 0000000b 00000004 00000000 81c21470 8001c9fc
[ 69.980000] 00006c00 00000000 00000008 00000004 00000008 814d00f8 00000008 814db834
[ 69.980000] 81c27ba8 00030001 81600b60 00000000 00000000 fffffffe 00000000 0000ff01
[ 69.980000] ...
[ 69.980000] Call Trace:[<80017d60>] 0x80017d60
[ 69.980000] [<8015aab0>] 0x8015aab0
[ 69.980000] [<8001c9fc>] 0x8001c9fc
[ 69.980000] [<814d00f8>] 0x814d00f8
[ 69.980000] [<814db834>] 0x814db834
[ 69.980000] [<81600b60>] 0x81600b60
[ 69.980000] [<801a0a4c>] 0x801a0a4c
[ 69.980000] [<81612454>] 0x81612454
[ 69.980000] [<801a0ad0>] 0x801a0ad0
[ 69.980000] [<801a0a4c>] 0x801a0a4c
[ 69.980000] [<814c733c>] 0x814c733c
[ 69.980000] [<80013840>] 0x80013840
[ 69.980000] [<8161223c>] 0x8161223c
[ 69.980000] [<801a0a4c>] 0x801a0a4c
[ 69.980000] [<814c733c>] 0x814c733c
[ 69.980000] [<800476f4>] 0x800476f4
[ 69.980000] [<816123b0>] 0x816123b0
[ 69.980000] [<814db834>] 0x814db834
[ 69.980000] [<814d00f8>] 0x814d00f8
[ 69.980000] [<801a0a4c>] 0x801a0a4c
[ 69.980000] [<814c733c>] 0x814c733c
[ 69.980000] [<814db834>] 0x814db834
[ 69.980000] [<814e1e80>] 0x814e1e80
[ 69.980000] [<814dabac>] 0x814dabac
[ 69.980000] [<814c733c>] 0x814c733c
[ 69.980000] [<814dc974>] 0x814dc974
[ 69.980000] [<801a09b4>] 0x801a09b4
[ 69.980000] [<814de224>] 0x814de224
[ 69.980000] [<814c6aa8>] 0x814c6aa8
[ 69.980000] [<81637f64>] 0x81637f64
[ 69.980000] [<814df964>] 0x814df964
[ 69.980000] [<814c76dc>] 0x814c76dc
[ 69.980000] [<80046bc8>] 0x80046bc8
[ 69.980000] [<814c733c>] 0x814c733c
[ 69.980000] [<800375e0>] 0x800375e0
[ 69.980000] [<800476f4>] 0x800476f4
[ 69.980000] [<80038224>] 0x80038224
[ 69.980000] [<8023f68c>] 0x8023f68c
[ 69.980000] [<80037fc8>] 0x80037fc8
[ 69.980000] [<80037fc8>] 0x80037fc8
[ 69.980000] [<8003be30>] 0x8003be30
[ 69.980000] [<80015310>] 0x80015310
[ 69.980000] [<8003bda8>] 0x8003bda8
[ 69.980000] [<80015300>] 0x80015300
[ 69.980000]
[ 69.980000]
[ 69.980000] Code: 70822802 00a61021 00000000 <1440ffff> 2442ffff 03e00008 00000000 3c028029 8c430680
[ 70.364000] ---[ end trace a25b18ee5bd1b87c ]---
[ 70.368000] Kernel panic - not syncing: Fatal exception in interrupt
[/spoiler]
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Pues transmission en este router debería funcionarte bastante mejor que en el comtrend (mejor cpu, más Ram, usb más rápido ...)
Enviado desde mi U8500 usando Tapatalk 2
Buenas, por mas que miro y vuelvo a mirar no puedo entrar al sistema para cargar el openwrt. Probé lo de pulsar el reset y 30 seg. pero se reinicia y vuelve al estado normal. Como puedo cargar el open??Ése es exactamente el problema, que nadie sabe cómo hacer que el router entre en el bootloader. Por eso, si se queda frito, la única forma de entrar en el bootloader es utilizando un cable uart (serial).
Bueno lo dejo aqui por si alguno me puede contestar!No te tomes a mal la respuesta: Lo que estás haciendo no tiene ni pies ni cabeza :$. El archivo 6328_svn.patch sirve para añadir soporte para este router en el código fuente de openwrt. Si te bajas uno de los firmwares que facilito no lo necesitas para nada ;).
He pasado el patch por ssh al router, le he dado permisos y lo he intentado ejecutar.
root@OpenWrt:/# ls -l 6328_svn.patch
-rwxr-xr-x 1 root root 35574 Sep 8 16:17 6328_svn.patch
root@OpenWrt:/# ./6328_svn.patch
./6328_svn.patch: line 1: Index:: not found
./6328_svn.patch: line 2: ===================================================================: not found
./6328_svn.patch: line 3: syntax error: unexpected "("
root@OpenWrt:/#
Intentare no ser muy pesado (pero es que me encantan los juguetes nuevos! :) )
He estado mirando las opciones de las interfaces y del wifi
en wifi le doy a enable y me pone... [Wireless is restarting...] y [despues Wireless is disabled or not associated] el caso es que pense que no funcionaba el wifi pero si me pilla las wifis cercanas si le doy a scan.
jajajaja no no hombre a mal nunca! al reves y sabes algo de lo de la wifi? es que no se como hacerlo... me he conectado a mi otro router por wifi pero la señal se queda en 0% aunque estan a medio metro.No sé que puede estar pasando...
ahh entonces no podre dar Wifi en mi red con el ADB?No, no puedes por el driver incluido en el firmware. Está escrito en el primer post...
Pues yo recuerdo haber actualizado un firm de teléfonica desde LuCi ... ^-^Desde LuCI no creo que lo hayas actualizado :$, aunque todo puede ser...
Pensé que era el del primer post, sorry :-X
jajaja tio eres un maquina! todo correcto aunque me sale la puñetera interfaz de homestation y me tengo que meter en main.html para ver algo decente... si cambio el main.html por el index.html... deberia tirar no?Debería, pero no tengo este router, por lo que no puedo hacer pruebas ni nada. Es más, por lo que me dices imagino que hay una interfaz sidosa de Movistar por encima de la que viene con el firmware de broadcom, pero nunca la he visto.
Felicidades!Felicidades a ti también, que gran parte del trabajo es tuya ^^.
Enviado desde mi GT-P6810 usando Tapatalk 2
Hola, pensais que el puerto usb tiene suficiente potencia para mantener un disco duro usb de 2,5"?En ningún caso se va a "freir" por necesitar más intensidad, por lo que puedes probarlo sin problemas.
No se si se freira al solicitar tanta potencia. Ahora mismo lo tengo conectado mediante un hub usb con alimentador.
Que opinais?
Yo he tenido conectado durante días un HD de marca LaCie (2,5" y 80 gigas) sin ningún problema ;)Depende del router y del disco duro ;).
Ya esta en enabled en start-up,
cuando llegue a casa, te pongo el system log, o algún dmesg,
alomejor tu lo sabes interpretar mejor que yo,pero me parece que no monta el pendrive
intentare probar formateando en ext3.
las pruebas las estaba haciendo con fat32 pero no sera el filesystem definitivo porque solo soporta archivos de 4Gb maximo,y necesito poder descargar archivos de hasta 25GB
aunque me interesaria más ntfs, para poder utilizar los datos en WIN.
Gracias
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.564000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.572000] console [ttyS0] enabled, bootconsole disabled
Sep 8 15:44:07 OpenWrt kern.warn kernel: [ 0.588000] m25p80 spi0.0: found mx25l12805d, expected m25p80
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.596000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.600000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.608000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.616000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.620000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.628000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.772000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.780000] Registered led device: 963281T_TEF:green:power
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.780000] Registered led device: 963281T_TEF:red:power
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.780000] Registered led device: 963281T_TEF:green:inet
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.784000] Registered led device: 963281T_TEF:red:inet
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.784000] Registered led device: 963281T_TEF:green:ppp
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.784000] Registered led device: 963281T_TEF:red:ppp
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.784000] Registered led device: 963281T_TEF:green:3g
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.784000] Registered led device: 963281T_TEF:red:3g
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.784000] Registered led device: 963281T_TEF:green:wlan
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.784000] Registered led device: 963281T_TEF:red:wlan
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.784000] Registered led device: 963281T_TEF:green:eth
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 0.788000] Registered led device: 963281T_TEF:red:eth
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.788000] TCP cubic registered
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.792000] NET: Registered protocol family 17
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.796000] 8021q: 802.1Q VLAN Support v1.8
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.808000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 0.820000] Freeing unused kernel memory: 204k freed
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 3.232000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 3.472000] roboswitch: Probing device eth0:
Sep 8 15:44:07 OpenWrt kern.warn kernel: [ 3.476000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
Sep 8 15:44:07 OpenWrt kern.warn kernel: [ 3.484000] No Robo switch in managed mode found, phy_id = 0xffffffff
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 3.492000] roboswitch: Probing device eth1: No such device
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 3.496000] roboswitch: Probing device eth2: No such device
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 3.504000] roboswitch: Probing device eth3: No such device
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 6.032000] Button Hotplug driver version 0.4.1
Sep 8 15:44:07 OpenWrt kern.notice kernel: [ 9.940000] JFFS2 notice: (363) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 5 of xref (0 dead, 0 orphan) found.
Sep 8 15:44:07 OpenWrt kern.notice kernel: [ 11.304000] SCSI subsystem initialized
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 11.552000] usbcore: registered new interface driver usbfs
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 11.556000] usbcore: registered new interface driver hub
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 11.564000] usbcore: registered new device driver usb
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 12.128000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 12.240000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 12.732000] usbcore: registered new interface driver usb-storage
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 12.740000] USB Mass Storage support registered.
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 12.784000] scsi0 : usb-storage 1-1:1.0
Sep 8 15:44:07 OpenWrt kern.notice kernel: [ 13.788000] scsi 0:0:0:0: Direct-Access USB 2.0 Flash Disk 1.00 PQ: 0 ANSI: 0 CCS
Sep 8 15:44:07 OpenWrt kern.notice kernel: [ 13.800000] sd 0:0:0:0: [sda] 3989504 512-byte logical blocks: (2.04 GB/1.90 GiB)
Sep 8 15:44:07 OpenWrt kern.notice kernel: [ 13.812000] sd 0:0:0:0: [sda] Write Protect is off
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 13.816000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
Sep 8 15:44:07 OpenWrt kern.err kernel: [ 13.816000] sd 0:0:0:0: [sda] No Caching mode page present
Sep 8 15:44:07 OpenWrt kern.err kernel: [ 13.824000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Sep 8 15:44:07 OpenWrt kern.err kernel: [ 13.832000] sd 0:0:0:0: [sda] No Caching mode page present
Sep 8 15:44:07 OpenWrt kern.err kernel: [ 13.840000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 13.848000] sda: sda1
Sep 8 15:44:07 OpenWrt kern.err kernel: [ 13.856000] sd 0:0:0:0: [sda] No Caching mode page present
Sep 8 15:44:07 OpenWrt kern.err kernel: [ 13.860000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Sep 8 15:44:07 OpenWrt kern.notice kernel: [ 13.868000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.048000] Compat-wireless backport release: compat-wireless-2012-07-13
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.052000] Backport based on wireless-testing.git master-2012-07-16
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.060000] compat.git: wireless-testing.git
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.120000] cfg80211: Calling CRDA to update world regulatory domain
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.124000] cfg80211: World regulatory domain updated:
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.132000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.140000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.148000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.156000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.164000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.172000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.564000] NET: Registered protocol family 10
Sep 8 15:44:07 OpenWrt kern.warn kernel: [ 36.888000] There is already a switch registered on the device 'eth0'
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.892000] roboswitch: Probing device eth1: No such device
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.900000] roboswitch: Probing device eth2: No such device
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 36.904000] roboswitch: Probing device eth3: No such device
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 37.644000] NTFS driver 2.1.30 [Flags: R/O MODULE].
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 38.028000] PPP generic driver version 2.4.2
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 38.464000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 38.816000] bcma: bus0: Switched to core: 0x812
Sep 8 15:44:07 OpenWrt kern.debug kernel: [ 38.820000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 38.988000] ip_tables: (C) 2000-2006 Netfilter Core Team
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 39.448000] NET: Registered protocol family 24
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 39.540000] nf_conntrack version 0.5.0 (461 buckets, 1844 max)
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.208000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.712000] usbcore: registered new interface driver ums-alauda
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.744000] usbcore: registered new interface driver ums-cypress
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.772000] usbcore: registered new interface driver ums-datafab
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.804000] usbcore: registered new interface driver ums-freecom
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.836000] usbcore: registered new interface driver ums-isd200
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.864000] usbcore: registered new interface driver ums-jumpshot
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.896000] usbcore: registered new interface driver ums-karma
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.928000] usbcore: registered new interface driver ums-sddr09
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 40.960000] usbcore: registered new interface driver ums-sddr55
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 41.132000] usbcore: registered new interface driver ums-usbat
Sep 8 15:44:07 OpenWrt kern.info kernel: [ 41.164000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
Sep 8 15:44:09 OpenWrt kern.info kernel: [ 45.064000] device eth0 entered promiscuous mode
Sep 8 15:44:09 OpenWrt kern.info kernel: [ 45.068000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
Sep 8 15:44:09 OpenWrt kern.info kernel: [ 45.080000] br-lan: port 1(eth0) entered forwarding state
Sep 8 15:44:09 OpenWrt kern.info kernel: [ 45.084000] br-lan: port 1(eth0) entered forwarding state
Sep 8 15:44:09 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Sep 8 15:44:09 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Sep 8 15:44:11 OpenWrt user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Sep 8 15:44:11 OpenWrt kern.info kernel: [ 47.088000] br-lan: port 1(eth0) entered forwarding state
Sep 8 15:44:12 OpenWrt user.info sysinit: command failed: Operation not supported (-122)
Sep 8 15:44:12 OpenWrt user.info sysinit: command failed: Device or resource busy (-16)
Sep 8 15:44:12 OpenWrt kern.warn kernel: [ 48.296000] dummy
Sep 8 15:44:12 OpenWrt kern.warn kernel: [ 48.300000] dummy
Sep 8 15:44:12 OpenWrt kern.warn kernel: [ 48.300000] dummy
Sep 8 15:44:12 OpenWrt kern.warn kernel: [ 48.304000] dummy
Sep 8 15:44:12 OpenWrt kern.warn kernel: [ 48.304000] dummy
Sep 8 15:44:12 OpenWrt kern.warn kernel: [ 48.308000] dummy
Sep 8 15:44:12 OpenWrt kern.warn kernel: [ 48.308000] dummy
Sep 8 15:44:12 OpenWrt kern.warn kernel: [ 48.312000] dummy
Sep 8 15:44:12 OpenWrt kern.err kernel: [ 48.312000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Sep 8 15:44:12 OpenWrt kern.err kernel: [ 48.320000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
Sep 8 15:44:12 OpenWrt kern.info kernel: [ 48.376000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 8 15:44:15 OpenWrt user.notice ifup: Enabling Router Solicitations on loopback (lo)
Sep 8 15:44:15 OpenWrt kern.info kernel: [ 51.288000] wlan0: authenticate with a4:52:6f:de:6f:ce
Sep 8 15:44:15 OpenWrt kern.info kernel: [ 51.296000] wlan0: send auth to a4:52:6f:de:6f:ce (try 1/3)
Sep 8 15:44:15 OpenWrt kern.info kernel: [ 51.316000] wlan0: authenticated
Sep 8 15:44:15 OpenWrt kern.info kernel: [ 51.332000] wlan0: associate with a4:52:6f:de:6f:ce (try 1/3)
Sep 8 15:44:15 OpenWrt kern.info kernel: [ 51.348000] wlan0: RX AssocResp from a4:52:6f:de:6f:ce (capab=0x401 status=0 aid=1)
Sep 8 15:44:15 OpenWrt kern.warn kernel: [ 51.356000] dummy
Sep 8 15:44:15 OpenWrt kern.warn kernel: [ 51.356000] dummy
Sep 8 15:44:15 OpenWrt kern.warn kernel: [ 51.360000] dummy
Sep 8 15:44:15 OpenWrt kern.warn kernel: [ 51.360000] dummy
Sep 8 15:44:15 OpenWrt kern.err kernel: [ 51.364000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
Sep 8 15:44:15 OpenWrt kern.err kernel: [ 51.368000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Sep 8 15:44:15 OpenWrt kern.err kernel: [ 51.380000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
Sep 8 15:44:15 OpenWrt kern.info kernel: [ 51.388000] wlan0: associated
Sep 8 15:44:15 OpenWrt kern.info kernel: [ 51.392000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sep 8 15:44:16 OpenWrt daemon.notice netifd: wwan (933): udhcpc (v1.19.4) started
Sep 8 15:44:16 OpenWrt daemon.notice netifd: wwan (933): Sending discover...
Sep 8 15:44:16 OpenWrt daemon.notice netifd: wwan (933): Sending select for 192.168.1.240...
Sep 8 15:44:16 OpenWrt daemon.notice netifd: wwan (933): Lease of 192.168.1.240 obtained, lease time 86400
Sep 8 15:44:17 OpenWrt kern.err kernel: [ 52.524000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Sep 8 15:44:17 OpenWrt daemon.notice netifd: Interface 'wwan' is now up
Sep 8 15:44:19 OpenWrt user.notice ifup: Allowing Router Advertisements on wwan (wlan0)
Sep 8 15:44:20 OpenWrt user.info sysinit: Loading defaults
Sep 8 15:44:21 OpenWrt user.info sysinit: Loading synflood protection
Sep 8 15:44:22 OpenWrt user.info sysinit: Adding custom chains
Sep 8 15:44:24 OpenWrt user.info sysinit: Loading zones
Sep 8 15:44:24 OpenWrt user.notice fstab: Unable to check/repair /dev/sda1; no known fsck for filesystem type
Sep 8 15:44:24 OpenWrt user.notice fstab: Mount enabled for /dev/sda1 but it doesn't have a defined mountpoint (target)
Sep 8 15:44:26 OpenWrt kern.debug kernel: [ 61.776000] wlan0: no IPv6 routers present
Sep 8 15:44:26 OpenWrt user.info sysinit: Loading forwardings
Sep 8 15:44:26 OpenWrt user.info sysinit: Loading rules
Sep 8 15:44:27 OpenWrt user.info sysinit: Loading redirects
Sep 8 15:44:27 OpenWrt user.info sysinit: Loading includes
Sep 8 15:44:27 OpenWrt user.info sysinit: Optimizing conntrack
Sep 8 15:44:27 OpenWrt user.info sysinit: Loading interfaces
Sep 8 15:44:28 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Sep 8 15:44:29 OpenWrt user.info firewall: adding wwan (wlan0) to zone wan
Sep 8 15:44:31 OpenWrt authpriv.info dropbear[1495]: Running in background
Sep 8 15:44:34 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sep 8 15:44:34 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sep 8 15:44:34 OpenWrt daemon.info dnsmasq[1537]: started, version 2.62 cachesize 150
Sep 8 15:44:34 OpenWrt daemon.info dnsmasq[1537]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Sep 8 15:44:34 OpenWrt daemon.info dnsmasq[1537]: using local addresses only for domain lan
Sep 8 15:44:34 OpenWrt daemon.info dnsmasq[1537]: reading /tmp/resolv.conf.auto
Sep 8 15:44:34 OpenWrt daemon.info dnsmasq[1537]: using nameserver 192.168.1.1#53
Sep 8 15:44:34 OpenWrt daemon.info dnsmasq[1537]: using local addresses only for domain lan
Sep 8 15:44:34 OpenWrt daemon.info dnsmasq[1537]: read /etc/hosts - 1 addresses
[/spoiler]
Ahí va un system log, a ver si esta correcto lo del usb y como le digo a trasmission que descargue sobre el dispositivoTe he editado el mensaje para que el log no afecte al tamaño del foro.
Ya he instalado block-mount y veo la pestala de mount-points en LUci.
¿esta montado? ó ¿hay que montarlo?, se puede hacer desde LUci?
esque jamás he usado linux hasta ayer.
Sep 8 15:44:24 OpenWrt user.notice fstab: Unable to check/repair /dev/sda1; no known fsck for filesystem type
Sep 8 15:44:24 OpenWrt user.notice fstab: Mount enabled for /dev/sda1 but it doesn't have a defined mountpoint (target)
dmesg > /www/dmesg.txt
Desde tu PC: http://192.168.1.1/dmesg.txtGracias noltari y pikomule, despues de tres dias dandole al tema, gracias a vuestra ayuda he conseguido descargar al pendrive con transmission, pero con un gran inconveniente,Tienes que forzar las dependencias.
Y es que, solo funciona con pendrives formateados en ext3/ext4.
Y yo, lo que quiero es poder descargar sobre pen formateados en NTFS,
He investigado durante dias y he llegado a ver, a alguien que ha instalado el paquete ntfs-3g y luego editando el script de arranque, pero desgraciadamente no puedo instalar dicho paquete, me da siempre el siguiente error:
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for ntfs-3g:
* kernel (= 3.3.8-1-e30cb424324bf4b4da2ed054936f8d78) *
* opkg_install_cmd: Cannot install package ntfs-3g.
estoy desesperado, ¿ se os ocurre alguna solución) gracias.
opkg install --force-depend ntfs-3g
Está utilizando kmod-fs-ntfs, que lo monta como solo lectura.
¡¡Cachis la mar¡¡¡ esto es lo que me ha contestado:
root@OpenWrt:~# chmod 777 /mnt/sda/
chmod: /mnt/sda/: Read-only file system
opkg install --force-depend libgcc libpthread libc kmod-fuse ntfs-3g
Es mejor generar un firmware que tenga ntfs-3g y que no tenga kmod-fs-ntfs.
Gracias por tu consejo ,jar229 pero lo tenemos que intentar,si lo conseguimos se van a beneficiar muchas personas.
Gracias Noltari, sigue sin escribir en el pendrive formateado en NTFS,
le he metido los paquetes que me has dicho, pero creo que solo los ha actualizado,
root@OpenWrt:~# opkg install --force-depend libgcc libpthread libc kmod-fuse ntfs-3g
Package libgcc (4.6-linaro-1) installed in root is up to date.
Package libpthread (0.9.33.2-1) installed in root is up to date.
Package libc (0.9.33.2-1) installed in root is up to date.
Package kmod-fuse (3.3.8-1) installed in root is up to date.
Package ntfs-3g (2011.4.12-1-fuseint) installed in root is up to date.
root@OpenWrt:~# chmod 777 /mnt/sda/
chmod: /mnt/sda/: Read-only file system
Podrias probarlo en tu Home Station ADB P.DG A4001N1,a ver si consigues descargar con transmission sobre NTFS?
Gracias.
ntfs-3g /dev/sda1 /mnt/usb-ntfs -o rw,sync
root@OpenWrt:~# chmod 777 /mnt/sda1/
chmod: /mnt/sda1/: Read-only file system
root@OpenWrt:~# ntfs-3g /dev/sda1 /mnt/usb-ntfs -o rw,sync
Mount is denied because the NTFS volume is already exclusively opened.
The volume may be already mounted, or another software may use it which
could be identified for example by the help of the 'fuser' command.
root@OpenWrt:~# Mount is denied because the NTFS volume is already exclusively opened.
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sun Aug 26 15:04:46 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802acea0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd
console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29320k/32768k available (2262k kernel code, 3448k reserved, 415k data, 204k
init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.352000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: bus0: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: bus0: PMU resource config unknown or not needed for device 0xA8D9
[ 0.380000] bcma: bus0: Workarounds unknown or not needed for device 0xA8D9
[ 0.412000] bcma: bus0: SPROM offset 0x800
[ 0.452000] bcma: Reading SPROM failed. Trying fallback SPROM...
[ 0.452000] bcm63xx_sprom_bcma: filled BCMA SPROM for chip id 0xa8d9
[ 0.456000] bcma: bus0: Using SPROM revision 8 provided by platform.
[ 0.456000] bcma: bus0: Bus registered
[ 0.460000] NET: Registered protocol family 2
[ 0.468000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.480000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.488000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.496000] TCP reno registered
[ 0.500000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.512000] NET: Registered protocol family 1
[ 0.516000] PCI: CLS 0 bytes, default 16
[ 0.520000] audit: initializing netlink socket (disabled)
[ 0.524000] type=2000 audit(0.524:1): initialized
[ 0.532000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.536000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.548000] msgmni has been set to 57
[ 0.552000] io scheduler noop registered
[ 0.556000] io scheduler deadline registered (default)
[ 0.564000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.572000] console [ttyS0] enabled, bootconsole disabled
[ 0.588000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.596000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.600000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.608000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.616000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.620000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.628000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.636000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.644000] bcm63xxpart: Spare partition is offset 340004 and length cafffc
[ 0.652000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.656000] Creating 5 MTD partitions on "spi0.0":
[ 0.660000] 0x000000000000-0x000000010000 : "CFE"
[ 0.668000] 0x000000010100-0x000000100000 : "kernel"
[ 0.676000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller
than an erase block -- forcing read-only
[ 0.692000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.700000] mtd: partition "rootfs" set to be root filesystem
[ 0.704000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=CB0000
[ 0.712000] 0x000000340000-0x000000ff0000 : "rootfs_data"
[ 0.720000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.728000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.772000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.780000] Registered led device: 963281T_TEF:green:power
[ 0.780000] Registered led device: 963281T_TEF:red:power
[ 0.780000] Registered led device: 963281T_TEF:green:inet
[ 0.784000] Registered led device: 963281T_TEF:red:inet
[ 0.784000] Registered led device: 963281T_TEF:green:ppp
[ 0.784000] Registered led device: 963281T_TEF:red:ppp
[ 0.784000] Registered led device: 963281T_TEF:green:3g
[ 0.784000] Registered led device: 963281T_TEF:red:3g
[ 0.784000] Registered led device: 963281T_TEF:green:wlan
[ 0.784000] Registered led device: 963281T_TEF:red:wlan
[ 0.784000] Registered led device: 963281T_TEF:green:eth
[ 0.788000] Registered led device: 963281T_TEF:red:eth
[ 0.788000] TCP cubic registered
[ 0.792000] NET: Registered protocol family 17
[ 0.796000] 8021q: 802.1Q VLAN Support v1.8
[ 0.808000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.820000] Freeing unused kernel memory: 204k freed
[ 3.260000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 2, 100Mbps, full-duplex
[ 3.268000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
[ 3.508000] roboswitch: Probing device eth0:
[ 3.512000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.520000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.528000] roboswitch: Probing device eth1: No such device
[ 3.532000] roboswitch: Probing device eth2: No such device
[ 3.540000] roboswitch: Probing device eth3: No such device
[ 6.068000] Button Hotplug driver version 0.4.1
[ 10.016000] JFFS2 notice: (362) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1
of xdatum (1 unchecked, 0 orphan) and 39 of xref (0 dead, 34 orphan) found.
[ 11.396000] SCSI subsystem initialized
[ 11.640000] usbcore: registered new interface driver usbfs
[ 11.648000] usbcore: registered new interface driver hub
[ 11.656000] usbcore: registered new device driver usb
[ 12.236000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.344000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[ 12.348000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[ 12.380000] bcm63xx_ehci bcm63xx_ehci.0: irq 50, io mem 0xb0002500
[ 12.396000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 12.404000] hub 1-0:1.0: USB hub found
[ 12.408000] hub 1-0:1.0: 1 port detected
[ 12.604000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 12.716000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[ 12.720000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[ 12.728000] bcm63xx_ohci bcm63xx_ohci.0: irq 49, io mem 0xb0002600
[ 12.736000] usb 1-1: new high-speed USB device number 2 using bcm63xx_ehci
[ 12.796000] hub 2-0:1.0: USB hub found
[ 12.800000] hub 2-0:1.0: 1 port detected
[ 12.836000] Initializing USB Mass Storage driver...
[ 12.840000] usbcore: registered new interface driver usb-storage
[ 12.848000] USB Mass Storage support registered.
[ 12.888000] scsi0 : usb-storage 1-1:1.0
[ 13.892000] scsi 0:0:0:0: Direct-Access USB 2.0 Flash Disk 1.00 PQ: 0 ANSI: 0 CCS
[ 13.904000] sd 0:0:0:0: [sda] 3989504 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 13.916000] sd 0:0:0:0: [sda] Write Protect is off
[ 13.920000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 13.920000] sd 0:0:0:0: [sda] No Caching mode page present
[ 13.928000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.940000] sd 0:0:0:0: [sda] No Caching mode page present
[ 13.944000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.952000] sda: sda1
[ 13.960000] sd 0:0:0:0: [sda] No Caching mode page present
[ 13.968000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.972000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 35.712000] Compat-wireless backport release: compat-wireless-2012-07-13
[ 35.720000] Backport based on wireless-testing.git master-2012-07-16
[ 35.724000] compat.git: wireless-testing.git
[ 35.788000] cfg80211: Calling CRDA to update world regulatory domain
[ 35.792000] cfg80211: World regulatory domain updated:
[ 35.800000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 35.808000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 35.816000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 35.824000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 35.832000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 35.840000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.236000] NET: Registered protocol family 10
[ 36.560000] There is already a switch registered on the device 'eth0'
[ 36.564000] roboswitch: Probing device eth1: No such device
[ 36.572000] roboswitch: Probing device eth2: No such device
[ 36.576000] roboswitch: Probing device eth3: No such device
[ 37.324000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 37.708000] PPP generic driver version 2.4.2
[ 38.148000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 38.500000] bcma: bus0: Switched to core: 0x812
[ 38.504000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 38.672000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.132000] NET: Registered protocol family 24
[ 39.224000] nf_conntrack version 0.5.0 (461 buckets, 1844 max)
[ 39.900000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 40.408000] usbcore: registered new interface driver ums-alauda
[ 40.436000] usbcore: registered new interface driver ums-cypress
[ 40.468000] usbcore: registered new interface driver ums-datafab
[ 40.500000] usbcore: registered new interface driver ums-freecom
[ 40.528000] usbcore: registered new interface driver ums-isd200
[ 40.560000] usbcore: registered new interface driver ums-jumpshot
[ 40.592000] usbcore: registered new interface driver ums-karma
[ 40.624000] usbcore: registered new interface driver ums-sddr09
[ 40.652000] usbcore: registered new interface driver ums-sddr55
[ 40.828000] usbcore: registered new interface driver ums-usbat
[ 40.860000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 40.972000] fuse init (API version 7.18)
[ 43.724000] NTFS volume version 3.1.
[ 46.036000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 2, 100Mbps, full-duplex
[ 46.044000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
[ 46.052000] device eth0 entered promiscuous mode
[ 46.060000] br-lan: port 1(eth0) entered forwarding state
[ 46.064000] br-lan: port 1(eth0) entered forwarding state
[ 48.068000] br-lan: port 1(eth0) entered forwarding state
[ 48.388000] cfg80211: Calling CRDA for country: ES
[ 48.392000] cfg80211: Regulatory domain changed to country: ES
[ 48.400000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.408000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.416000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.424000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.432000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 49.920000] dummy
[ 49.924000] dummy
[ 49.924000] dummy
[ 49.928000] dummy
[ 49.932000] dummy
[ 49.932000] dummy
[ 49.936000] dummy
[ 49.936000] dummy
[ 49.940000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 49.948000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 49.976000] ADDRCONF(NETDEV_UP): wlan0: link is not ready.
ntfs-3g /dev/sda1 /mnt/usb-ntfs -o rw,sync
ntfs-3g /dev/sda1 /mnt/usb-ntfs -o rw,sync
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 12.7M 3.3M 9.4M 26% /
/dev/root 2.3M 2.3M 0 100% /rom
tmpfs 14.4M 136.0K 14.3M 1% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 12.7M 3.3M 9.4M 26% /overlay
overlayfs:/overlay 12.7M 3.3M 9.4M 26% /
/dev/sda1 1.9G 33.5M 1.9G 2% /mnt/sda1
umount /mnt/usb-ntfs
ntfs-3g /dev/sda1 /mnt/usb-ntfs -o rw,sync
umount /mnt/sda1
y montando denuevo conntfs-3g /dev/sda1 /mnt/sda1 -o rw,sync
root@OpenWrt:~# /etc/config/fstab
-ash: /etc/config/fstab: Permission denied
vi /etc/config/fstab
root@OpenWrt:~# cat /etc/config/fstab
config global 'automount'
option from_fstab '1'
option anon_mount '1'
config global 'autoswap'
option from_fstab '1'
option anon_swap '0'
config swap
option device '/dev/sda4'
option enabled '0'
config mount
option enabled '1'
option fstype 'ext4'
option options 'rw,sync'
option target '/mnt/sda4'
option device '/dev/sda4'
config mount
option target '/mnt/sda3'
option fstype 'ntfs'
option options 'rw,sync'
option device '/dev/sda3'
option enabled '0'
ntfs-3g /dev/sda3 /mnt/usb-ntfs -o rw,sync
Parece que no existen los directorios a los que tratas de acceder.
Ya tengo instalado samba y veo las las 2 particiones en mi ordenador, pero cuando accedo a ellas me da el siguiente error:
(http://img18.imageshack.us/img18/2762/capturadepantalla201211j.png)
Esta es mi configuracion en Luci en la pestaña Network Shares:
(http://imageshack.us/a/img69/3471/capturadepantalla201211id.png)
Alguen sabe que tengo que hacer para ver el contenido de las particiones en red?
Gracias.
ls -lsa /mnt/
root@OpenWrt:~# ls -lsa /mnt/
0 drwxr-xr-x 1 root root 0 Nov 10 00:07 .
0 drwxr-xr-x 1 root root 0 Jan 1 1970 ..
0 drwxr-xr-x 2 root root 0 Nov 10 00:07 Descargas
0 drwxr-xr-x 2 root root 0 Nov 4 12:12 sda1
0 drwxr-xr-x 2 root root 0 Nov 7 23:41 sda2
4 drwxrwxrwx 1 root root 4096 Nov 10 08:28 sda3
4 drwxrwxrwx 6 999 999 4096 Nov 10 19:18 sda4
Vale, ejecuta también:
Siento lo de los post repetidos, no veia el post publicado y lo he enviado mas de una vez sin querer.
Los directorios parece ser que estan montados,pero no deja abrirlos.
El resultado del ha sido este:
Código: [Seleccionar]root@OpenWrt:~# ls -lsa /mnt/
0 drwxr-xr-x 1 root root 0 Nov 10 00:07 .
0 drwxr-xr-x 1 root root 0 Jan 1 1970 ..
0 drwxr-xr-x 2 root root 0 Nov 10 00:07 Descargas
0 drwxr-xr-x 2 root root 0 Nov 4 12:12 sda1
0 drwxr-xr-x 2 root root 0 Nov 7 23:41 sda2
4 drwxrwxrwx 1 root root 4096 Nov 10 08:28 sda3
4 drwxrwxrwx 6 999 999 4096 Nov 10 19:18 sda4
ls -lsa /mnt/sda3
ls -lsa /mnt/sda4
root@OpenWrt:~# ls -lsa /mnt/sda3
4 drwxrwxrwx 1 root root 4096 Nov 10 08:28 .
0 drwxr-xr-x 1 root root 0 Nov 10 00:07 ..
8 -rwxrwxrwx 1 root root 6148 Nov 10 08:29 .DS_Store
0 drwxrwxrwx 1 root root 0 Nov 8 10:53 .Trash-999
0 drwxrwxrwx 1 root root 0 Nov 10 08:29 .Trashes
4 -rwxrwxrwx 1 root root 4096 Nov 8 11:55 ._.Trashes
0 drwxrwxrwx 1 root root 0 Nov 10 08:29 .fseventsd
22447332 -rwxrwxrwx 1 root root 22986066003 Nov 9 12:41 Indiana Jones y El templo maldito (1984) [BluRay 1080p x264 Dual AC3-DTS Spa-Eng Subs][Audio Dabaka][By Althus][GrupoHDS].mkv
11989852 -rwxrwxrwx 1 root root 12277605585 Nov 5 23:52 The Amazing Spider-Man (2012)[BluRay 1080p x264 DTS Spa-Eng Subs][GrupoHDS].mkv
root@OpenWrt:~# ls -lsa /mnt/sda4
4 drwxrwxrwx 6 999 999 4096 Nov 10 19:18 .
0 drwxr-xr-x 1 root root 0 Nov 10 00:07 ..
8 -rw-r--r-- 1 root root 6148 Nov 8 12:16 .DS_Store
4 drwx------ 4 999 999 4096 Nov 8 10:53 .Trash-999
4 d-wx-wx-wt 2 root root 4096 Nov 8 12:18 .Trashes
4 --w--w--w- 1 root root 4096 Nov 5 09:16 ._.Trashes
4 drwx------ 2 root root 4096 Nov 8 12:18 .fseventsd
1652 -rw-r--r-- 1 root root 1687339 Nov 10 19:14 Cinch 1.0.6.dmg
1724312 -rw-r--r-- 1 root root 1765687758 Nov 10 22:30 Craving Black Booty.wmv
1627788 -rw-r--r-- 1 root root 1666845485 Nov 10 20:12 Final Cut Pro 10.0.6.zip
4 drwxr-xr-x 2 root root 4096 Nov 10 10:41 Girls T1 [HDTV 720p x264 AC3 Dual Subs][GrupoHDS]
11989856 -rw------- 1 999 999 12277605585 Nov 10 08:26 The Amazing Spider-Man (2012)[BluRay 1080p x264 DTS Spa-Eng Subs][GrupoHDS].mkv
root@OpenWrt:~#
Pues sinceramente, no sé por qué no funciona. Los discos están bien montados :$...
¡¡Bien¡¡, parece que avanzamos,...... >:( >:( >:( >:( >:( >:( >:(
No se lo que estamos haciendo, pero por lo menos salen las pelis que tengo en las particiones.Código: [Seleccionar]root@OpenWrt:~# ls -lsa /mnt/sda3
4 drwxrwxrwx 1 root root 4096 Nov 10 08:28 .
0 drwxr-xr-x 1 root root 0 Nov 10 00:07 ..
8 -rwxrwxrwx 1 root root 6148 Nov 10 08:29 .DS_Store
0 drwxrwxrwx 1 root root 0 Nov 8 10:53 .Trash-999
0 drwxrwxrwx 1 root root 0 Nov 10 08:29 .Trashes
4 -rwxrwxrwx 1 root root 4096 Nov 8 11:55 ._.Trashes
0 drwxrwxrwx 1 root root 0 Nov 10 08:29 .fseventsd
22447332 -rwxrwxrwx 1 root root 22986066003 Nov 9 12:41 Indiana Jones y El templo maldito (1984) [BluRay 1080p x264 Dual AC3-DTS Spa-Eng Subs][Audio Dabaka][By Althus][GrupoHDS].mkv
11989852 -rwxrwxrwx 1 root root 12277605585 Nov 5 23:52 The Amazing Spider-Man (2012)[BluRay 1080p x264 DTS Spa-Eng Subs][GrupoHDS].mkv
root@OpenWrt:~# ls -lsa /mnt/sda4
4 drwxrwxrwx 6 999 999 4096 Nov 10 19:18 .
0 drwxr-xr-x 1 root root 0 Nov 10 00:07 ..
8 -rw-r--r-- 1 root root 6148 Nov 8 12:16 .DS_Store
4 drwx------ 4 999 999 4096 Nov 8 10:53 .Trash-999
4 d-wx-wx-wt 2 root root 4096 Nov 8 12:18 .Trashes
4 --w--w--w- 1 root root 4096 Nov 5 09:16 ._.Trashes
4 drwx------ 2 root root 4096 Nov 8 12:18 .fseventsd
1652 -rw-r--r-- 1 root root 1687339 Nov 10 19:14 Cinch 1.0.6.dmg
1724312 -rw-r--r-- 1 root root 1765687758 Nov 10 22:30 Craving Black Booty.wmv
1627788 -rw-r--r-- 1 root root 1666845485 Nov 10 20:12 Final Cut Pro 10.0.6.zip
4 drwxr-xr-x 2 root root 4096 Nov 10 10:41 Girls T1 [HDTV 720p x264 AC3 Dual Subs][GrupoHDS]
11989856 -rw------- 1 999 999 12277605585 Nov 10 08:26 The Amazing Spider-Man (2012)[BluRay 1080p x264 DTS Spa-Eng Subs][GrupoHDS].mkv
root@OpenWrt:~#
Problema anterior resuelto.
Pero tengo otra duda.
¿se puede evitar que los torrent que tienes bajando se borren cada vez que apagas el router?
Es un coñazo volverlos a cargar y peor aún esperar a que los verifique.
Un saludo.
.
Problema anterior resuelto.
Pero tengo otra duda.
¿se puede evitar que los torrent que tienes bajando se borren cada vez que apagas el router?
Es un coñazo volverlos a cargar y peor aún esperar a que los verifique.
Un saludo.
.
Tienes que cambiar el directorio en el que se guardan (por defecto en /tmp que se borra en cada reinicio). En el tutorial del hg553 está explicado.
Router soportado oficialmente en la versión r33893.
https://dev.openwrt.org/changeset/33893
Aviso: soportada la placa base. Para que el wifi funcione hacen falta otros parches relacionados con el BCMA. Estos parches están bajo revisión de jogo y se integrarán pronto:
http://patchwork.openwrt.org/patch/2553/
http://patchwork.openwrt.org/patch/2554/
Uno de ellos ya ha sido integrado (este parche se lo sugerí yo a Hauke, pero acabó ignorando el mío y añadiéndolo específicamente para la plataforma bcm47xx. Hablé con jogo para que lo cambiara a genérico):
https://dev.openwrt.org/changeset/33896
Saludos :D!
yo en tramission tengo 150 conexiones por torrent y lo mismo en total. Solo una descarga simultanea, cuando termina una comienza la otra.
Slots maximo de subida 2
a mi asi me va perfecto
Gracias jar,ya que estas por aquí aprovecho para comentarte algo.
Transmission se me cuelga de todas formas (Por eso te preguntaba lo del firm oficial,)
por mas que lo intento, reduciendo el ancho de banda,reduciendo los pares maximos (175)
reduciendo los pares por torrent (35)
slots maximos de subida (4)
Tengo 3 torrent bajando simltaneamente.
al cabo de unos minutos se cuelga y deja funcionar.
Estoy desesperado,
¿alguna solucion?
Y ya te adelanto que vas a tener problemas de rendimiento usando ntfs como sistema de archivos.
Si la cuestión es poder leer el pen en sistemas windows, tienes aplicaciones para ello ^-^
Despues de comentarte lo del ntfs,lo comprobe y tenias razón la velocidad no pasaba de 300KBs,
Luego he descargado sobre ext4 y llega al maximo de mi linea 1000KBs, pero el problema no es ese,
el problema es es que ,cuando la velocidad de descarga es alta ,transmission se bloquea al cabo de unos minutos.
Tambien he notado que en esta situacion cuesta mucho tiempo entrar al router por luci, es como si no pudiese con toda la carga,.
Puede ser por la limitacion del procesador y/o memoria de estos dispositivos?
o deberia,soportar varias descargas a tope de velocidad ?
df -h
free
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 12.7M 4.7M 7.9M 37% /
/dev/root 2.3M 2.3M 0 100% /rom
tmpfs 14.4M 440.0K 14.0M 3% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 12.7M 4.7M 7.9M 37% /overlay
overlayfs:/overlay 12.7M 4.7M 7.9M 37% /
/dev/sda4 133.5G 97.4G 29.4G 77% /mnt/sda4
/dev/sda3 133.9G 1.0G 132.9G 1% /mnt/sda3
root@OpenWrt:~# free
total used free shared buffers
Mem: 29524 28684 840 0 524
-/+ buffers: 28160 1364
Swap: 0 0 0
Hola murph, que me corrijan si me equivoco, pero yo lo veo todo correcto y con espacio suficiente para los 2 mb de cache que necesita transmission.
No se me ocurre nada mas, que intentarlo con la unidad swap.
saludos :(
hola murph, jiji ;D, tienes razon te ase falta una unidad swap urgentemente, no te queda casi nada de ram. no me fije bien en los números y creí que sobraban 28 mb, ;D.
saludos ;D
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 12.7M 4.8M 7.9M 37% /
/dev/root 2.3M 2.3M 0 100% /rom
tmpfs 14.4M 432.0K 14.0M 3% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 12.7M 4.8M 7.9M 37% /overlay
overlayfs:/overlay 12.7M 4.8M 7.9M 37% /
/dev/sda4 133.5G 98.8G 28.0G 78% /mnt/sda4
root@OpenWrt:~# free
total used free shared buffers
Mem: 29524 28524 1000 0 144
-/+ buffers: 28380 1144
Swap: 976556 1928 974628
free
total used free shared buffers
Mem: 29524 28524 1000 0 144
-/+ buffers: 28380 1144
Swap: 976556 1928 974628
root@ar5387un:~# free
total used free shared buffers
Mem: 61852 59636 2216 0 2892
-/+ buffers: 56744 5108
Swap: 524284 10620 513664
root@ar5387un:~#
root@Huawei:~# free
total used free shared buffers
Mem: 62172 60608 1564 0 2240
-/+ buffers: 58368 3804
Swap: 1051228 9092 1042136
root@Huawei:~#
No.
Solamente he instalado transmission y samba, y los uso los dos.
Por cierto.
¿Como puedo conectarme desde otro ordenador remoto? (cuando estoy fuera ejemplo) a mi disco
duro en red, ó a transmission mediante transmission remote gui,por ejemplo.
Gracias.
^-^ ^-^ ^-^ ^-^
no se que le e echo al ruter pero le pongo http://192.168.1.1/main.html o 192.168.1.1 y me deja entrar solo le e istalado PDG_TEF_SP_4.06L.4 y r33053 openwrt y no me ace nada el ruter agradeceria que me contesten no se que acer gracias
¿que puerto usa samba?
Bueno, pues ponemos otro puerto,da lo mismo,
la cuestion es como conectarse.
¿que puerto usa samba?
Bueno, pues ponemos otro puerto,da lo mismo,
la cuestion es como conectarse.
Yo no te recomendaría tener abierto samba para la red externa.
Mejor usa el FTP, es más seguro.
Samba usa el puerto 445 (y creo que alguno más)
Vale, voy a utilizar FTP, pero ¿que servidor FTP me recomiendas instalar?
Tengo una duda.
El DSL Funciona una vez flasheado con openWRT?
Gracias
Tengo una duda.
El DSL Funciona una vez flasheado con openWRT?
Gracias
No. La plataforma BCM63xx no tiene soporte DSL.
Añadido en el primer post, para que no queden dudas.
hola estareis arto de mi pero mi ruter no hace nada nada mas tiene el piloto de power encendido me meto en cmd y pongo ipconfig i me dice que mi puerta de enlace predeterminado me dice que es 192.168.249.1 me meto en el navegador y lo pongo y no me sale nada le e metido un palillo en el boton de reset y sige igual estoy aburida no se que hacer
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb-serial-ftdi:Creo que es por ser de distinto kernel, lo he intentado con --force-depends, insmod usb-serial y usb-serial-ftdi y nada.
* kernel (= 3.6.8-1-784a8b1b9bc86560177d76f9d202c26b)
Estoy intentando instalar un lector phoenix2-usb y no me es posible.
Necesito usb-serial y usb-serial-ftdi.
Pero los que estan en repo : http://downloads.openwrt.org/snapshots/trunk/brcm63xx/packages/ al instalarlos me dice:Citar* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb-serial-ftdi:Creo que es por ser de distinto kernel, lo he intentado con --force-depends, insmod usb-serial y usb-serial-ftdi y nada.
* kernel (= 3.6.8-1-784a8b1b9bc86560177d76f9d202c26b)
¿Como podria instalar estos modulos para esta version?
¿Es complicado?
se podrian descargar de otro sitio para el kernel de este firmw.
Enhorabuena y muchas gracias.
Si no te has cargado el bootloader, podrás recuperarlo.
Enviado desde mi Cube U30GT (ROM: Infected v.2.0) usando Tapatalk 2
Router recuperado ;D
Pulsé f (si es que hay que leer ;D). El router entró al CFE, y desde el navegador le metí la última versión de OpenWrt (r33275) >:(
Yo tampoco entiendo porqué no entra al CFE usando el reset + 20 segundos. Pero vamos es que nunca conseguí que entrara ... ^-^
confirmo que pulsando la tecla F en el hyperterminal al encender el router, permite la carga a traves del navegador. 192.168.1.1
he usado un serial to usb ttl:
(http://image.made-in-china.com/2f0j00JCfatsNMfwcQ/JY-MCU-USB-Serial-Port-Stc-Download-CP2102-CTS-RTS-TTL-level.jpg)
[ 3.428000] roboswitch: Probing device eth3: No such device
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Por cierto, quiero montar una particion HFS en este router para poder utilizarla con un Imac, y he hecho lo siguiente:
He instalado:
Kmod-fs-hfs
Kmod-fs hfsplus
Y ahora como se si estan activos?
¿Como monto la particion /sda2 de 30Gb que esta formateada en hfsplus?
Gracias.
root@OpenWrt:~# mount -t hfsplus /dev/sda2 /mnt/sda2
mount: mounting /dev/sda2 on /mnt/sda2 failed: No such file or directory
root@OpenWrt:~# dmesg
abling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802acea0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29320k/32768k available (2262k kernel code, 3448k reserved, 415k data, 204k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.352000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: bus0: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: bus0: PMU resource config unknown or not needed for device 0xA8D9
[ 0.380000] bcma: bus0: Workarounds unknown or not needed for device 0xA8D9
[ 0.412000] bcma: bus0: SPROM offset 0x800
[ 0.452000] bcma: Reading SPROM failed. Trying fallback SPROM...
[ 0.452000] bcm63xx_sprom_bcma: filled BCMA SPROM for chip id 0xa8d9
[ 0.456000] bcma: bus0: Using SPROM revision 8 provided by platform.
[ 0.456000] bcma: bus0: Bus registered
[ 0.460000] NET: Registered protocol family 2
[ 0.468000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.480000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.488000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.496000] TCP reno registered
[ 0.500000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.504000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.512000] NET: Registered protocol family 1
[ 0.516000] PCI: CLS 0 bytes, default 16
[ 0.520000] audit: initializing netlink socket (disabled)
[ 0.524000] type=2000 audit(0.524:1): initialized
[ 0.532000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.536000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.548000] msgmni has been set to 57
[ 0.552000] io scheduler noop registered
[ 0.556000] io scheduler deadline registered (default)
[ 0.564000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.572000] console [ttyS0] enabled, bootconsole disabled
[ 0.588000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.596000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.600000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.608000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.616000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.620000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.628000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.636000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.644000] bcm63xxpart: Spare partition is offset 340004 and length cafffc
[ 0.652000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.656000] Creating 5 MTD partitions on "spi0.0":
[ 0.660000] 0x000000000000-0x000000010000 : "CFE"
[ 0.668000] 0x000000010100-0x000000100000 : "kernel"
[ 0.676000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.692000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.700000] mtd: partition "rootfs" set to be root filesystem
[ 0.704000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=CB0000
[ 0.712000] 0x000000340000-0x000000ff0000 : "rootfs_data"
[ 0.720000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.728000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.772000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.780000] Registered led device: 963281T_TEF:green:power
[ 0.780000] Registered led device: 963281T_TEF:red:power
[ 0.780000] Registered led device: 963281T_TEF:green:inet
[ 0.784000] Registered led device: 963281T_TEF:red:inet
[ 0.784000] Registered led device: 963281T_TEF:green:ppp
[ 0.784000] Registered led device: 963281T_TEF:red:ppp
[ 0.784000] Registered led device: 963281T_TEF:green:3g
[ 0.784000] Registered led device: 963281T_TEF:red:3g
[ 0.784000] Registered led device: 963281T_TEF:green:wlan
[ 0.784000] Registered led device: 963281T_TEF:red:wlan
[ 0.784000] Registered led device: 963281T_TEF:green:eth
[ 0.788000] Registered led device: 963281T_TEF:red:eth
[ 0.788000] TCP cubic registered
[ 0.792000] NET: Registered protocol family 17
[ 0.796000] 8021q: 802.1Q VLAN Support v1.8
[ 0.808000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.820000] Freeing unused kernel memory: 204k freed
[ 3.244000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
[ 3.480000] roboswitch: Probing device eth0:
[ 3.484000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.496000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.500000] roboswitch: Probing device eth1: No such device
[ 3.508000] roboswitch: Probing device eth2: No such device
[ 3.512000] roboswitch: Probing device eth3: No such device
[ 6.044000] Button Hotplug driver version 0.4.1
[ 10.136000] JFFS2 notice: (364) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 14 of xref (0 dead, 0 orphan) found.
[ 11.128000] SCSI subsystem initialized
[ 11.360000] usbcore: registered new interface driver usbfs
[ 11.368000] usbcore: registered new interface driver hub
[ 11.376000] usbcore: registered new device driver usb
[ 12.160000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.272000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[ 12.276000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[ 12.308000] bcm63xx_ehci bcm63xx_ehci.0: irq 50, io mem 0xb0002500
[ 12.324000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 12.332000] hub 1-0:1.0: USB hub found
[ 12.336000] hub 1-0:1.0: 1 port detected
[ 12.400000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 12.512000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[ 12.516000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[ 12.524000] bcm63xx_ohci bcm63xx_ohci.0: irq 49, io mem 0xb0002600
[ 12.592000] hub 2-0:1.0: USB hub found
[ 12.596000] hub 2-0:1.0: 1 port detected
[ 12.660000] usb 1-1: new high-speed USB device number 2 using bcm63xx_ehci
[ 12.692000] Initializing USB Mass Storage driver...
[ 12.696000] usbcore: registered new interface driver usb-storage
[ 12.704000] USB Mass Storage support registered.
[ 12.800000] scsi0 : usb-storage 1-1:1.0
[ 13.804000] scsi 0:0:0:0: Direct-Access WD My Passport 071A 2011 PQ: 0 ANSI: 4
[ 13.820000] scsi 0:0:0:1: Enclosure WD SES Device 2011 PQ: 0 ANSI: 4
[ 13.828000] sd 0:0:0:0: [sda] 625086464 512-byte logical blocks: (320 GB/298 GiB)
[ 13.840000] sd 0:0:0:0: [sda] Write Protect is off
[ 13.844000] sd 0:0:0:0: [sda] Mode Sense: 2b 00 10 08
[ 13.848000] sd 0:0:0:0: [sda] No Caching mode page present
[ 13.856000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.868000] sd 0:0:0:0: [sda] No Caching mode page present
[ 13.872000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 14.256000] sda: sda1 sda2 sda3 sda4
[ 14.272000] sd 0:0:0:0: [sda] No Caching mode page present
[ 14.276000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 14.284000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 37.020000] Compat-wireless backport release: compat-wireless-2012-07-13
[ 37.028000] Backport based on wireless-testing.git master-2012-07-16
[ 37.032000] compat.git: wireless-testing.git
[ 37.284000] cfg80211: Calling CRDA to update world regulatory domain
[ 37.288000] cfg80211: World regulatory domain updated:
[ 37.296000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 37.304000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.312000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 37.320000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 37.328000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.336000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.768000] NET: Registered protocol family 10
[ 38.352000] There is already a switch registered on the device 'eth0'
[ 38.356000] roboswitch: Probing device eth1: No such device
[ 38.364000] roboswitch: Probing device eth2: No such device
[ 38.368000] roboswitch: Probing device eth3: No such device
[ 39.456000] PPP generic driver version 2.4.2
[ 39.960000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 40.272000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 40.416000] bcma: bus0: Switched to core: 0x812
[ 40.420000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 40.616000] NET: Registered protocol family 24
[ 40.756000] nf_conntrack version 0.5.0 (461 buckets, 1844 max)
[ 41.268000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 41.784000] usbcore: registered new interface driver ums-alauda
[ 41.816000] usbcore: registered new interface driver ums-cypress
[ 41.856000] usbcore: registered new interface driver ums-datafab
[ 41.912000] usbcore: registered new interface driver ums-freecom
[ 41.952000] usbcore: registered new interface driver ums-isd200
[ 41.988000] usbcore: registered new interface driver ums-jumpshot
[ 42.024000] usbcore: registered new interface driver ums-karma
[ 42.068000] usbcore: registered new interface driver ums-sddr09
[ 42.104000] usbcore: registered new interface driver ums-sddr55
[ 42.148000] usbcore: registered new interface driver ums-usbat
[ 42.196000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 42.308000] fuse init (API version 7.18)
[ 45.304000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[ 45.848000] EXT4-fs (sda4): recovery complete
[ 45.856000] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 49.028000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
[ 49.048000] device eth0 entered promiscuous mode
[ 49.056000] br-lan: port 1(eth0) entered forwarding state
[ 49.064000] br-lan: port 1(eth0) entered forwarding state
[ 51.068000] br-lan: port 1(eth0) entered forwarding state
[ 51.496000] cfg80211: Calling CRDA for country: ES
[ 51.500000] cfg80211: Regulatory domain changed to country: ES
[ 51.508000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 51.516000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 51.524000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 51.532000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 51.540000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 53.112000] dummy
[ 53.112000] dummy
[ 53.116000] dummy
[ 53.116000] dummy
[ 53.120000] dummy
[ 53.120000] dummy
[ 53.124000] dummy
[ 53.124000] dummy
[ 53.128000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 53.136000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 53.228000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 283.080000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[ 283.744000] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[62595.176000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[62595.760000] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[62732.400000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[62817.796000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[62869.824000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[62901.372000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[62955.756000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[62969.744000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[62988.464000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[63038.928000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[63106.728000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[63123.068000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[63134.404000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
[63159.964000] Adding 976556k swap on /dev/sda3. Priority:-1 extents:1 across:976556k
.
ls /mnt
root@OpenWrt:~# ls /mnt
sda4
root@OpenWrt:~# mkdir /mnt/sda2
root@OpenWrt:~# ls /mnt
sda2 sda4
root@OpenWrt:~# mount -t hfsplus /dev/sda2 /mnt/sda2
mount: mounting /dev/sda2 on /mnt/sda2 failed: No such device
Buenos días, este aparatito ya tiene wifi funcional?
Es que según el primer post no funciona en modo AP y en un rendimiento super pobre.
Gracias
Gracias socio, el b43 admite mas modos ademas de cliente?Sí, admite más modos:
Pregunta un poco tonta, este router como ap no funciona bien...
pero si lo pongo como cliente de un ap que cree con la ubitiqui deberia de funcionar con buen rendimiento y conexion estable nop?
Gracias
Hola. :D
Tengo este router....
No se si ponermelo para ADSL, instalarle Open-Wrt o arrancarle el BGA para el adsl y meterme en temas RafaC >:(
Bueno, ahí lo dejo, como no lo tengo claro me dedico a otras cositas :-*
Salud. ;)
Hola,Me vas a perdonar, pero el primer comentario que te voy a hacer es: si no tienes ni idea de lo que estás haciendo no te arriesgues a cargarte algo, primero debes preguntar.
Primero de todo muchas gracias por la información.
Tengo un par de preguntas que hacer y un comentario sobre la información que ya está publicada.
Empezemos con el comentario / aclaración ...
En el post inicial se dice que "Igualmente funcionará lo de pulsar el botón de reset, enceder y esperar 30 segundos, y con un navegador abrir 192.168.1.1 y flashear desde ahí. No he probado desde el firmware original."
Cuando se pulsa el reset, sin soltarlo se enciende, se espera con el pulsado 30 sec y se suelta, el router arranca. Entiendo que con la configuración por defecto. Por eso hacer el reset.
Para acceder a la página en la que se puede instalar el nuevo firmware hay que usar la URL "http://192.168.1.1/main.html", autenticarse con usuario 1234 password 1234 y buscar la opción. Ya no me acuerdo de dónde estaba.
Creo que sería útil añadir esta información. Encontrarla me ha llevado un par de horas.
Y ahora mi pregunta:
Cual es el voltaje del puerto série ?
Y el origen de la pregunta:
Mi idéa era reemplazar el router de mis padres conectado a la fibra de telefonica con pppoe con este router. De ese modo puedo montar openvpn entre nuestras redes ... pero ...
Me he cargado la configuración de la instalación del openwrt. He tocado el fichero /etc/config/network para generar una vlan en uno de los puertos ethernet para dedicarlo al pppoe y no puedo acceder a la red.
La configuración que he puesto y que creía correcta es:
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config 'switch' 'eth0'
option 'reset' '1'
option 'enable_vlan' '1'
config 'switch_vlan' 'lan'
option 'device' 'eth0'
option 'vlan' '1'
option 'ports' '0 1 2'
option proto 'static'
option netmask '255.255.255.0'
option ipaddr '192.168.1.254'
No tengo puerto série. Estoy en casa de mis padres a 2000kms de la mia !
Obviamente la pregunta es como recuperar el router.
Se me ocurre conectarme usado IPV6, si es que está configurado por defecto.
Se os ocurre algo ?
A mi solo buscar una tienda en Madrid que me venda un usb<->RS232 y un adaptador de voltaje en función de mi primera pregunta.
Muchas gracias.
idollar
Me vas a perdonar, pero el primer comentario que te voy a hacer es: si no tienes ni idea de lo que estás haciendo no te arriesgues a cargarte algo, primero debes preguntar.
No hay soporte para VLANs en los switches internos/externos en la plataforma bcm63xx, salvo para el 6338/6345/6348/6358 (este router lleva un 6328).
Tienes varias opciones, entrar en modo failsafe, que restaura la configuración de OpenWrt y por telnet borrar la partición de datos: "mtd erase -r rootfs_data". Una vez hecho eso, el router debería reiniciarse a la configuración original. Cuando se reinicie puedes flashear la imagen desde luci o por sysupgrade (creo, porque la imagen que está subida está comprimida en LZMA, y no sé si LuCI la admite).
Otra opción es acceder al bootloader y flashear el firmware de Jazztel, pero el problema es que en este router en concreto el bootloader para flashearlo vía web sólo carga con un conversor uart, que no tienes.
Saludos.
Me vas a perdonar, pero el primer comentario que te voy a hacer es: si no tienes ni idea de lo que estás haciendo no te arriesgues a cargarte algo, primero debes preguntar.
No hay soporte para VLANs en los switches internos/externos en la plataforma bcm63xx, salvo para el 6338/6345/6348/6358 (este router lleva un 6328).
Tienes varias opciones, entrar en modo failsafe, que restaura la configuración de OpenWrt y por telnet borrar la partición de datos: "mtd erase -r rootfs_data". Una vez hecho eso, el router debería reiniciarse a la configuración original. Cuando se reinicie puedes flashear la imagen desde luci o por sysupgrade (creo, porque la imagen que está subida está comprimida en LZMA, y no sé si LuCI la admite).
Otra opción es acceder al bootloader y flashear el firmware de Jazztel, pero el problema es que en este router en concreto el bootloader para flashearlo vía web sólo carga con un conversor uart, que no tienes.
Saludos.
root@OpenWrt:/sys/kernel/debug/usb# lsmod | grep dm9601
dm9601 5040 0 [permanent]
usbnet 12784 1 dm9601,[permanent]
usbcore 101808 14 dm9601,ums_usbat,ums_sddr55,ums_sddr09,ums_karma,ums_jumpshot,ums_isd200,ums_freecom,ums_datafab,ums_cypress,ums_alauda,usbnet,usb_storage,ehci_hcd
root@OpenWrt:/sys/kernel/debug/usb# dmesg | grep -i dm9601
[ 41.060000] usbcore: registered new interface driver dm960
root@OpenWrt:~# dmesg | grep -i usb
[ 11.896000] usbcore: registered new interface driver usbfs
[ 11.900000] usbcore: registered new interface driver hub
[ 11.912000] usbcore: registered new device driver usb
[ 12.496000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.612000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[ 12.660000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 12.668000] hub 1-0:1.0: USB hub found
[ 12.708000] Initializing USB Mass Storage driver...
[ 12.712000] usbcore: registered new interface driver usb-storage
[ 12.720000] USB Mass Storage support registered.
[ 40.656000] usbcore: registered new interface driver ums-alauda
[ 40.684000] usbcore: registered new interface driver ums-cypress
[ 40.716000] usbcore: registered new interface driver ums-datafab
[ 40.744000] usbcore: registered new interface driver ums-freecom
[ 40.776000] usbcore: registered new interface driver ums-isd200
[ 40.808000] usbcore: registered new interface driver ums-jumpshot
[ 40.836000] usbcore: registered new interface driver ums-karma
[ 40.868000] usbcore: registered new interface driver ums-sddr09
[ 40.896000] usbcore: registered new interface driver ums-sddr55
[ 41.072000] usbcore: registered new interface driver ums-usbat
[ 41.108000] usbcore: registered new interface driver dm9601
Nada
root@OpenWrt:~# dmesg | grep -i usb
[ 11.928000] usbcore: registered new interface driver usbfs
[ 11.932000] usbcore: registered new interface driver hub
[ 11.940000] usbcore: registered new device driver usb
[ 12.532000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.644000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[ 12.692000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 12.700000] hub 1-0:1.0: USB hub found
[ 12.740000] Initializing USB Mass Storage driver...
[ 12.744000] usbcore: registered new interface driver usb-storage
[ 12.752000] USB Mass Storage support registered.
[ 13.020000] usb 1-1: new high-speed USB device number 2 using bcm63xx_ehci
[ 13.172000] scsi0 : usb-storage 1-1:1.0
[ 14.176000] scsi 0:0:0:0: Direct-Access TTI-MSA USB 2.0 MD PMAP PQ: 0 ANSI: 0 CCS
[ 40.672000] usbcore: registered new interface driver ums-alauda
[ 40.700000] usbcore: registered new interface driver ums-cypress
[ 40.732000] usbcore: registered new interface driver ums-datafab
[ 40.760000] usbcore: registered new interface driver ums-freecom
[ 40.788000] usbcore: registered new interface driver ums-isd200
[ 40.820000] usbcore: registered new interface driver ums-jumpshot
[ 40.848000] usbcore: registered new interface driver ums-karma
[ 40.880000] usbcore: registered new interface driver ums-sddr09
[ 40.912000] usbcore: registered new interface driver ums-sddr55
[ 41.084000] usbcore: registered new interface driver ums-usbat
[ 41.120000] usbcore: registered new interface driver dm9601
root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlayfs (rw,noatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
root@OpenWrt:/sys/kernel/debug/usb# cat devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.06
S: Manufacturer=Linux 3.6.11 ehci_hcd
S: Product=BCM63XX integrated EHCI controller
S: SerialNumber=bcm63xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=126f ProdID=5000 Rev= 1.00
S: Manufacturer=TTI-MSA
S: Product=USB 2.0 MD
S: SerialNumber=1F3608000E8A
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@OpenWrt:/sys/kernel/debug/usb# cat devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.06
S: Manufacturer=Linux 3.6.11 ehci_hcd
S: Product=BCM63XX integrated EHCI controller
S: SerialNumber=bcm63xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
root@OpenWrt:/sys/kernel/debug/usb# dmesg | grep -i usb
[ 11.864000] usbcore: registered new interface driver usbfs
[ 11.872000] usbcore: registered new interface driver hub
[ 11.880000] usbcore: registered new device driver usb
[ 12.472000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.584000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[ 12.632000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[ 12.640000] hub 1-0:1.0: USB hub found
[ 12.680000] Initializing USB Mass Storage driver...
[ 12.684000] usbcore: registered new interface driver usb-storage
[ 12.692000] USB Mass Storage support registered.
[ 40.608000] usbcore: registered new interface driver ums-alauda
[ 40.636000] usbcore: registered new interface driver ums-cypress
[ 40.668000] usbcore: registered new interface driver ums-datafab
[ 40.696000] usbcore: registered new interface driver ums-freecom
[ 40.728000] usbcore: registered new interface driver ums-isd200
[ 40.756000] usbcore: registered new interface driver ums-jumpshot
[ 40.788000] usbcore: registered new interface driver ums-karma
[ 40.820000] usbcore: registered new interface driver ums-sddr09
[ 40.848000] usbcore: registered new interface driver ums-sddr55
[ 41.020000] usbcore: registered new interface driver ums-usbat
[ 41.060000] usbcore: registered new interface driver dm9601
root@OpenWrt:/sys/kernel/debug/usb# cat devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.06
S: Manufacturer=Linux 3.6.11 ehci_hcd
S: Product=BCM63XX integrated EHCI controller
S: SerialNumber=bcm63xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
[ 193.368000] usb 1-1: USB disconnect, device number 2
[ 198.932000] usb 1-1: new high-speed USB device number 3 using bcm63xx_ehci
[ 199.084000] scsi0 : usb-storage 1-1:1.0
[ 200.088000] scsi 0:0:0:0: Direct-Access USB0912B Flash Disk 8.07 PQ: 0 ANSI: 2
[ 200.100000] sd 0:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[ 200.112000] sd 0:0:0:0: [sda] Write Protect is off
[ 200.116000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 200.124000] sd 0:0:0:0: [sda] No Caching mode page present
[ 200.128000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 200.140000] sd 0:0:0:0: [sda] No Caching mode page present
[ 200.148000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 200.524000] sda: sda1
[ 200.528000] sd 0:0:0:0: [sda] No Caching mode page present
[ 200.536000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 200.540000] sd 0:0:0:0: [sda] Attached SCSI removable disk
root@OpenWrt:~# lsusb
Bus 001 Device 003: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[ 230.576000] usb 1-1: USB disconnect, device number 3
[ 240.844000] usb 1-1: new high-speed USB device number 4 using bcm63xx_ehci
root@OpenWrt:~# lsusb
Bus 001 Device 004: ID 050d:5055 Belkin Components F5D5055 Gigabit Network Adapter [AX88xxx]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Presupongo que al instalar el driver kmod-usb-net-dm9601-ether y no coincidir con la versión del kernel, habrás forzado (--force-depends) la instalación no ?
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 002: ID 126f:5000 TwinMOS
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 003: ID 13fe:1f21 Kingston Technology Company Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 004: ID 8644:800b
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:/sys/kernel/debug/usb# cat devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.06
S: Manufacturer=Linux 3.6.11 ehci_hcd
S: Product=BCM63XX integrated EHCI controller
S: SerialNumber=bcm63xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=8644 ProdID=800b Rev= 1.00
S: Manufacturer=Intenso
S: Product=Intenso Micro Line
S: SerialNumber=12390000000066D2
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@OpenWrt:/sys/kernel/debug/usb# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:/sys/kernel/debug/usb# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:/sys/kernel/debug/usb# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:/sys/kernel/debug/usb# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:/sys/kernel/debug/usb# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 002: ID 126f:5000 TwinMOS
Bus 001 Device 002: ID 126f:5000 TwinMOS
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# opkg remove kmod-usb-net-dm9601-ether
Removing package kmod-usb-net-dm9601-ether from root...
root@OpenWrt:~# reboot; exit
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
O también puedes probar a bajar la versión del trunk (sin LuCi, ni paquetes adicionales) e instalar lo que te haga falta, poco a poco ... ^-^
[ 18.972000] roboswitch: timeout in robo_reg on page 52 and reg 8 with op 1.
[ 18.976000] roboswitch: timeout in robo_reg on page 52 and reg 10 with op 1.
ADB P.DG A4001N1
Supported since R33893.
Installation
Flashing ANY Firmware
You must set your TCP/IP v4 protocol to:
1. IP: 192.168.1.2
2. Netmask: 255.255.255.0
3. Gateway: 192.168.1.1
4. DNS: (optional, can be blank).
Then:
1. Power off the router.
2. Press reset button near the antenna.
3. Keep it pressed while powering up during ~20+ seconds.
4. Acces to http://192.168.1.1 and upload binary file.
5. Wait until router reboots.
toh/adb/p.dg_a4001n1.txt · Last modified: 2012/11/06 23:32 by noltari
O también puedes probar a bajar la versión del trunk (sin LuCi, ni paquetes adicionales) e instalar lo que te haga falta, poco a poco ... ^-^
Os cuento,
He instalado el trunk, he instalado los paquetes necesarios para hacer funcionar el USB storage.
He conseguido ver el hub y montar un mem stick
Pero ...
Lo mismo. En cuanto enchufo uno de los dos USB LAN (diferentes) que tengo, el USB se queda tieso.
Intento poner de nuevo el mem stick que funcionó unos segundos antes pero no lo ve.
La única solución es un reboot.
por cierto, desde que tengo la versión del trunk, veo lo siguiente, repetido MUUUCHAS veces, en los logs (dmesg):Citar[ 18.972000] roboswitch: timeout in robo_reg on page 52 and reg 8 with op 1.
[ 18.976000] roboswitch: timeout in robo_reg on page 52 and reg 10 with op 1.
Un comentario: compré esos routers pensando que esto sería sencillo. No había visto este foro ni este thread,
Solo leí lo siguiente en http://wiki.openwrt.org/toh/adb/p.dg_a4001n1:Citar
ADB P.DG A4001N1
Supported since R33893.
Installation
Flashing ANY Firmware
You must set your TCP/IP v4 protocol to:
1. IP: 192.168.1.2
2. Netmask: 255.255.255.0
3. Gateway: 192.168.1.1
4. DNS: (optional, can be blank).
Then:
1. Power off the router.
2. Press reset button near the antenna.
3. Keep it pressed while powering up during ~20+ seconds.
4. Acces to http://192.168.1.1 and upload binary file.
5. Wait until router reboots.
Para mi que el texto es demasiado optimista.
Nol se quien lo ha escrito, pero necesita una actualización:
- Mi experiencia con el USB
- Los 20 sec no funcionan
- WIFI AP issues
- No ETH switching
En cuanto esté todo solucionado va a ser router genial, me gusta mucho y va muy bién. Pero no está suficientemente maduro para ponerlo en "producción". Una pena.
Noltari ... la página es tuya. Para mi, de nuevo, hay que modificarla.
Tienes algún problema si lo hago yo basado en mi experiencia ?Citartoh/adb/p.dg_a4001n1.txt · Last modified: 2012/11/06 23:32 by noltari
idollar
Hola a todos, instalé esta imagen en mi router y la verdad que va de lujo, pero la cagué. Vi un tutorial para convertirlo en router neutro y algún parámetro puse mal en el archivo /etc/config/network porque ahora no puedo acceder al router de ninguna manera.
Lo he intentado con el failsafe mode pero recibo el mensaje cortado y da igual las teclas que pulse porque no responde.
¿alguna sugerencia??
La única solución si no consigues entrar en el modo failsafe es conectarte por UART con un conversor USB.Hola a todos, instalé esta imagen en mi router y la verdad que va de lujo, pero la cagué. Vi un tutorial para convertirlo en router neutro y algún parámetro puse mal en el archivo /etc/config/network porque ahora no puedo acceder al router de ninguna manera.
Lo he intentado con el failsafe mode pero recibo el mensaje cortado y da igual las teclas que pulse porque no responde.
¿alguna sugerencia??
nada?
La única solución si no consigues entrar en el modo failsafe es conectarte por UART con un conversor USB.Hola a todos, instalé esta imagen en mi router y la verdad que va de lujo, pero la cagué. Vi un tutorial para convertirlo en router neutro y algún parámetro puse mal en el archivo /etc/config/network porque ahora no puedo acceder al router de ninguna manera.
Lo he intentado con el failsafe mode pero recibo el mensaje cortado y da igual las teclas que pulse porque no responde.
¿alguna sugerencia??
nada?
Saludos.
No hace falta que montes un servidor TFTP, con que cortes el inicio del router y se quede en el bootloader, podrás acceder por web para subir el firmware.La única solución si no consigues entrar en el modo failsafe es conectarte por UART con un conversor USB.Hola a todos, instalé esta imagen en mi router y la verdad que va de lujo, pero la cagué. Vi un tutorial para convertirlo en router neutro y algún parámetro puse mal en el archivo /etc/config/network porque ahora no puedo acceder al router de ninguna manera.
Lo he intentado con el failsafe mode pero recibo el mensaje cortado y da igual las teclas que pulse porque no responde.
¿alguna sugerencia??
nada?
Saludos.
Hola, muchas gracias por contestar. Ya me pedí un conversor por ebay y el lunes o el martes le soldaré los cables en la placa, solo me quedan un par de dudas:
- En la imagen de la primera página, se deben puentear lo que aparece en rojo (R192 y R193) para conectarle el cable serie??
- La verdad que no se conectarme por UART (supongo que será similar a conectarse por puerto serie a otros dispositivos), ya vi que para cargarle la rom hay que levantar un servidor tftp y ejecutar un comando desde el CFE, pero como ejecuto ese comando?? Perdona por dar la chapa, pero ese punto no lo acabo de encontrar.
No hace falta que montes un servidor TFTP, con que cortes el inicio del router y se quede en el bootloader, podrás acceder por web para subir el firmware.La única solución si no consigues entrar en el modo failsafe es conectarte por UART con un conversor USB.Hola a todos, instalé esta imagen en mi router y la verdad que va de lujo, pero la cagué. Vi un tutorial para convertirlo en router neutro y algún parámetro puse mal en el archivo /etc/config/network porque ahora no puedo acceder al router de ninguna manera.
Lo he intentado con el failsafe mode pero recibo el mensaje cortado y da igual las teclas que pulse porque no responde.
¿alguna sugerencia??
nada?
Saludos.
Hola, muchas gracias por contestar. Ya me pedí un conversor por ebay y el lunes o el martes le soldaré los cables en la placa, solo me quedan un par de dudas:
- En la imagen de la primera página, se deben puentear lo que aparece en rojo (R192 y R193) para conectarle el cable serie??
- La verdad que no se conectarme por UART (supongo que será similar a conectarse por puerto serie a otros dispositivos), ya vi que para cargarle la rom hay que levantar un servidor tftp y ejecutar un comando desde el CFE, pero como ejecuto ese comando?? Perdona por dar la chapa, pero ese punto no lo acabo de encontrar.
El problema de este router es que no deja entrar al bootloader pulsando el botón reset como en el resto de la plataforma bcm63xx.
Saludos.
Yo suelo usar putty.
Has configurado correctamente el puerto serie (115200 8N1 sin control de flujo) ?
Hola, ayer deje frio este router, lo he recuperado por el puerto serie, pero lo que antes me salian palabras con sentido en la consola (antes de formatear mi PC) esta vez, solo salen simbolos raros, igualmete he pulsado la letra F y me ha activafo el CFE para recuperarlo. Perome intriga el por que de los simbolos raros.Tienes que ponerlo a 115200 baudios. El resto de la configuración está bien.
Esta es mi configuracion:
Bits por segudo: 9600
Bits de datos: 8
Paridad: Ninguno
Bits parada:1
Control de flujo: Ninguno
En codigo de Area puse 8 por que no sabia que poner
Bits por segudo: 115200
Bits de datos: 8
Paridad: Ninguno
Bits parada:1
Control de flujo: Ninguno
Hola, Estaba leyendo sobre el firmware OpenWRT y como no es mi modelo pensé que no podía ser instalado. Pero me di cuenta de que si este modelo si se puede http://wiki.openwrt.org/toh/adb/p.dg_a4001n1 (http://wiki.openwrt.org/toh/adb/p.dg_a4001n1) y desarme mi router y me di cuenta de que tiene estos datos.Buenas,
Procesador: Broadcom - bcm63281kfbg
Memoria: Nanya nt5tu32m16dg ac-
Wifi: Broadcom bcm43225kml
Memoria Flash: mxic mx25l6406e
Por lo que he podido encontrar es el mismo procesador, el chip wifi también, de acuerdo con el fabricante dice que el flash es de 64 MB, pero creo que es de menos, aunque es la misma marca que el ADB, el gestor de arranque que tiene es el mismo que tengo, imagen adjunta para ver. Quería saber como soy nuevo , si alguien me puede dar una mano, yo ya flashe otro router pero con otro firmware a través del puerto serial y me ha ido bien (CA42). Si me pudieran dar una mano gracias. Pongo fotos después del puerto serial y router.
(http://i931.photobucket.com/albums/ad157/Fedex159/1-15_zpsf435463d.jpg)
(http://i931.photobucket.com/albums/ad157/Fedex159/Foto0009_zps412fbe4f.jpg)
Buenas,
Ese router creo que ya está soportado por OpenWrt, ya que tiene el mismo identificador que una de las placas de desarrollo que hay para el BCM6328 (6328avng). Creo que la memoria que tiene es de 64 Mbits, es decir: 8MBytes.
4MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-4M-flash-generic-squashfs-cfe.bin)
8MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-8M-flash-generic-squashfs-cfe.bin)
16MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-16M-flash-generic-squashfs-cfe.bin)
Sin embargo, he de advertirte que si no dispones del firmware original del router no podrás volver al firmware oficial y perderás la funcionalidad de ADSL. Por tanto, a lo mejor podría ser interesante realizar un backup completo de la flash utilizando la herramienta cfetool antes de flashear OpenWrt (necesitas un conversor USB -> UART):
https://github.com/Noltari/cfetool
Saludos.
La conexión de los pines es distinta en cada placa, por lo que tendrás que averiguarlo tú mismo :$. Puedes identificar fácilmente los pines GND y VCC (el de VCC no tienes que usarlo), mientras que los pines de TX y RX es cuestión de probar xD.Buenas,
Ese router creo que ya está soportado por OpenWrt, ya que tiene el mismo identificador que una de las placas de desarrollo que hay para el BCM6328 (6328avng). Creo que la memoria que tiene es de 64 Mbits, es decir: 8MBytes.
4MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-4M-flash-generic-squashfs-cfe.bin)
8MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-8M-flash-generic-squashfs-cfe.bin)
16MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-16M-flash-generic-squashfs-cfe.bin)
Sin embargo, he de advertirte que si no dispones del firmware original del router no podrás volver al firmware oficial y perderás la funcionalidad de ADSL. Por tanto, a lo mejor podría ser interesante realizar un backup completo de la flash utilizando la herramienta cfetool antes de flashear OpenWrt (necesitas un conversor USB -> UART):
https://github.com/Noltari/cfetool
Saludos.
Buenas, yo cuando flashee otro router que tengo tambien lo hice por serial port, como no tenia ningun conversor lei que se podia con un cable ca-42 de nokia y me salio, queria saber como podria conectar el cable osea, cual es el gnd, rx vx de la placa esta y como deveria hacer para hacer el backup original del router. Otra cosa, vos me decis que no podre usar el adsl, osea que si le pongo este firmware quedaria solo como router y tendria que usar un modem en puente para poder conectarse no, Gracias.
La conexión de los pines es distinta en cada placa, por lo que tendrás que averiguarlo tú mismo :$. Puedes identificar fácilmente los pines GND y VCC (el de VCC no tienes que usarlo), mientras que los pines de TX y RX es cuestión de probar xD.Buenas,
Ese router creo que ya está soportado por OpenWrt, ya que tiene el mismo identificador que una de las placas de desarrollo que hay para el BCM6328 (6328avng). Creo que la memoria que tiene es de 64 Mbits, es decir: 8MBytes.
4MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-4M-flash-generic-squashfs-cfe.bin)
8MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-8M-flash-generic-squashfs-cfe.bin)
16MB de Flash (http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-96328avng-16M-flash-generic-squashfs-cfe.bin)
Sin embargo, he de advertirte que si no dispones del firmware original del router no podrás volver al firmware oficial y perderás la funcionalidad de ADSL. Por tanto, a lo mejor podría ser interesante realizar un backup completo de la flash utilizando la herramienta cfetool antes de flashear OpenWrt (necesitas un conversor USB -> UART):
https://github.com/Noltari/cfetool
Saludos.
Buenas, yo cuando flashee otro router que tengo tambien lo hice por serial port, como no tenia ningun conversor lei que se podia con un cable ca-42 de nokia y me salio, queria saber como podria conectar el cable osea, cual es el gnd, rx vx de la placa esta y como deveria hacer para hacer el backup original del router. Otra cosa, vos me decis que no podre usar el adsl, osea que si le pongo este firmware quedaria solo como router y tendria que usar un modem en puente para poder conectarse no, Gracias.
Además, con la calidad de la foto que has subido es bastante difícil identificar nada :$.
Sobre el tema del ADSL, es tal y como dices, necesitas un modem u otro router actuando como modem para poder conectarte a internet por ADSL.
Por cierto, los mensajes privados no están para recibir ayuda personalizada. Te ruego que utilices el foro para estos temas, ya que así todo queda visible para todo el mundo.
Saludos.
Mi ADB A4001N va de lujo, la única pega es que el wifi interno broadcom BCM43225 de este router no funciona en modo AP...
¿Alguna sugerencia?
Dices que por serial no hace nada?
Prueba a intercambiar TX por RX y viceversa (puede que sea eso), y no tengas miedo que haciendo eso no haces ningún cortocircuito >:D
Ya me cuentas
Mi ADB A4001N va de lujo, la única pega es que el wifi interno broadcom BCM43225 de este router no funciona en modo AP...
¿Alguna sugerencia?
Lo raro es que no fuera de lujo. ;D
De momento el modo AP funciona mal o no funciona con las wifi N de Broadcom.
https://dev.openwrt.org/changeset/35763
https://dev.openwrt.org/ticket/13058
Dices que por serial no hace nada?
Prueba a intercambiar TX por RX y viceversa (puede que sea eso), y no tengas miedo que haciendo eso no haces ningún cortocircuito >:D
Ya me cuentas
Joder macho...era eso, jaja. Hasta hoy no pude probarlo, pero desde luego...parezco nuevo. Muchas gracias ;)
Por cierto, ¿sabes como podría configurarlo como router neutro? Había seguido un manual que creaba un par de vlans, pero la otra vez no se si puse algo mal, pero mira en que acabé.
Dices que por serial no hace nada?
Prueba a intercambiar TX por RX y viceversa (puede que sea eso), y no tengas miedo que haciendo eso no haces ningún cortocircuito >:D
Ya me cuentas
Joder macho...era eso, jaja. Hasta hoy no pude probarlo, pero desde luego...parezco nuevo. Muchas gracias ;)
Por cierto, ¿sabes como podría configurarlo como router neutro? Había seguido un manual que creaba un par de vlans, pero la otra vez no se si puse algo mal, pero mira en que acabé.
Me alegro haberte ayudado >:D
¿Router neutro? ¿te refieres a ponerlo como repetidor?
El wifi interno de este router por ahora no funciona en modo AP, sin embargo por cable lan funciona de lujo, pero ya sabes que la comodidad del wifi siempre gusta...
Revisa estos links a ver si te ayudan:
https://foro.seguridadwireless.net/openwrt/%28tutorial%29-modo-clienterepetidor-openwrt/
http://wiki.openwrt.org/doc/recipes/relayclient
Dices que por serial no hace nada?
Prueba a intercambiar TX por RX y viceversa (puede que sea eso), y no tengas miedo que haciendo eso no haces ningún cortocircuito >:D
Ya me cuentas
Joder macho...era eso, jaja. Hasta hoy no pude probarlo, pero desde luego...parezco nuevo. Muchas gracias ;)
Por cierto, ¿sabes como podría configurarlo como router neutro? Había seguido un manual que creaba un par de vlans, pero la otra vez no se si puse algo mal, pero mira en que acabé.
Me alegro haberte ayudado >:D
¿Router neutro? ¿te refieres a ponerlo como repetidor?
El wifi interno de este router por ahora no funciona en modo AP, sin embargo por cable lan funciona de lujo, pero ya sabes que la comodidad del wifi siempre gusta...
Revisa estos links a ver si te ayudan:
https://foro.seguridadwireless.net/openwrt/%28tutorial%29-modo-clienterepetidor-openwrt/
http://wiki.openwrt.org/doc/recipes/relayclient
Me refiero a configurarlo como router neutro, ya que es adsl. Vamos, que un puerto haga del tipico puerto wan de los router neutro. No se si me explico...
Enviado desde mi GT-I9100 usando Tapatalk 2
Dices que por serial no hace nada?
Prueba a intercambiar TX por RX y viceversa (puede que sea eso), y no tengas miedo que haciendo eso no haces ningún cortocircuito >:D
Ya me cuentas
Joder macho...era eso, jaja. Hasta hoy no pude probarlo, pero desde luego...parezco nuevo. Muchas gracias ;)
Por cierto, ¿sabes como podría configurarlo como router neutro? Había seguido un manual que creaba un par de vlans, pero la otra vez no se si puse algo mal, pero mira en que acabé.
Me alegro haberte ayudado >:D
¿Router neutro? ¿te refieres a ponerlo como repetidor?
El wifi interno de este router por ahora no funciona en modo AP, sin embargo por cable lan funciona de lujo, pero ya sabes que la comodidad del wifi siempre gusta...
Revisa estos links a ver si te ayudan:
https://foro.seguridadwireless.net/openwrt/%28tutorial%29-modo-clienterepetidor-openwrt/
http://wiki.openwrt.org/doc/recipes/relayclient
Me refiero a configurarlo como router neutro, ya que es adsl. Vamos, que un puerto haga del tipico puerto wan de los router neutro. No se si me explico...
Enviado desde mi GT-I9100 usando Tapatalk 2
A ver... como todo en esta vida existe San Google xDD, no sé como se hace eso que me preguntas, pero buscando en menos de 1 minuto he encontrado este enlace:
http://wiki.openwrt.org/doc/uci/network/switch
Échale un ojo >:D
Hola,
Tengo totalmente operativo mi ADB A4001N, con wifi usb como cliente y el wifi interno (BCM43225) como AP sin problemas...
La cuestión es que sólo se enciende el led ON en color verde, pero el resto de leds NO se encienden :-\
¿Alguna sugerencia?
Hola,
Tengo totalmente operativo mi ADB A4001N, con wifi usb como cliente y el wifi interno (BCM43225) como AP sin problemas...
La cuestión es que sólo se enciende el led ON en color verde, pero el resto de leds NO se encienden :-\
¿Alguna sugerencia?
En luci hay un apartado para definir los leds, cuando encenderlos, definir algunas opciones básicas de señalización (wifi enganchada, tráfico de red en un interfaz, etc.). Al principio cuesta un poco, pero una vez que se le coge el truco se pueden hacer cosas interesantes y útiles.
También se pueden encender y apagar manualmente:
https://foro.seguridadwireless.net/openwrt/openwrt-en-comtrend-ar5387un/msg247663/#msg247663
Fijo que está explicado mejor y con más detalles en algún otro hilo. ^-^
Busque por todos lados y no pude encontrar nada, quisiera saber si alguien dispone del firmware para el ADB P.DG A4001N ya que todos son para ADB P.DG A4001N1 y creo que no funcionan en el primero que nombre, o agradecería algún tipo de ayuda.
Muchas gracias.
El problema es el siguiente, al conectar el modem indiferentemente de si conecto o no el cable telefónico lo único que hace es encender en rojo la luz de Internet, luego enciende por un segundo la luz de DSL y eso es todo, al conectarlo a la PC y revisar que hace el adaptador de red de Windows puedo ver que se conecta y desconecta todo el tiempo "Conectando - Identificando - Desconectado" y así todo el tiempo, nunca supera ese estado además de que la conectividad siempre en todo momento es limitada o nula.
La única forma que encontré de por así decir hacer que algo funcione es encendiéndolo con el botón de reset presionado para que entre en el modo de actualización y al ingresar a la IP del router 192.168.1.1 me da una pantalla con los pasos a seguir para hacer la actualización.
Leí que un usuario instaló la versión para el A4001N1 y no le funcionó porque el tenía la versión A40001N por eso quería saber si puedo usar este firmware sin problemas.
Y por ultimo en caso de que funcione alguna de las versiones que puso gmtii en el inicio cual es la más recomendable? r36114, r35763, r35318 (kmod-b43) o r35318 (kmod-brcmsmac)?
Desde ya muchas gracias! ;D
Dices que por serial no hace nada?
Prueba a intercambiar TX por RX y viceversa (puede que sea eso), y no tengas miedo que haciendo eso no haces ningún cortocircuito >:D
Ya me cuentas
Joder macho...era eso, jaja. Hasta hoy no pude probarlo, pero desde luego...parezco nuevo. Muchas gracias ;)
Por cierto, ¿sabes como podría configurarlo como router neutro? Había seguido un manual que creaba un par de vlans, pero la otra vez no se si puse algo mal, pero mira en que acabé.
Me alegro haberte ayudado >:D
¿Router neutro? ¿te refieres a ponerlo como repetidor?
El wifi interno de este router por ahora no funciona en modo AP, sin embargo por cable lan funciona de lujo, pero ya sabes que la comodidad del wifi siempre gusta...
Revisa estos links a ver si te ayudan:
https://foro.seguridadwireless.net/openwrt/%28tutorial%29-modo-clienterepetidor-openwrt/
http://wiki.openwrt.org/doc/recipes/relayclient
Me refiero a configurarlo como router neutro, ya que es adsl. Vamos, que un puerto haga del tipico puerto wan de los router neutro. No se si me explico...
Enviado desde mi GT-I9100 usando Tapatalk 2
A ver... como todo en esta vida existe San Google xDD, no sé como se hace eso que me preguntas, pero buscando en menos de 1 minuto he encontrado este enlace:
http://wiki.openwrt.org/doc/uci/network/switch
Échale un ojo >:D
Si ya lo se, nunca pregunto antes de buscar, pero te comprendo xq hay gnt q no. Ese manual es el q segui junto con otro de otro router pero no lo consegui, por eso lo preguntaba, x si alguien sabia hacerlo para este en particular, jeje. Volveré a intentarlo a ver si tengo mas suerte, revisando los puerto que tengo que usar, jeje. Ya os contare ;)
Enviado desde mi GT-I9100 usando Tapatalk 2
Dices que por serial no hace nada?
Prueba a intercambiar TX por RX y viceversa (puede que sea eso), y no tengas miedo que haciendo eso no haces ningún cortocircuito >:D
Ya me cuentas
Joder macho...era eso, jaja. Hasta hoy no pude probarlo, pero desde luego...parezco nuevo. Muchas gracias ;)
Por cierto, ¿sabes como podría configurarlo como router neutro? Había seguido un manual que creaba un par de vlans, pero la otra vez no se si puse algo mal, pero mira en que acabé.
Me alegro haberte ayudado >:D
¿Router neutro? ¿te refieres a ponerlo como repetidor?
El wifi interno de este router por ahora no funciona en modo AP, sin embargo por cable lan funciona de lujo, pero ya sabes que la comodidad del wifi siempre gusta...
Revisa estos links a ver si te ayudan:
https://foro.seguridadwireless.net/openwrt/%28tutorial%29-modo-clienterepetidor-openwrt/
http://wiki.openwrt.org/doc/recipes/relayclient
Me refiero a configurarlo como router neutro, ya que es adsl. Vamos, que un puerto haga del tipico puerto wan de los router neutro. No se si me explico...
Enviado desde mi GT-I9100 usando Tapatalk 2
A ver... como todo en esta vida existe San Google xDD, no sé como se hace eso que me preguntas, pero buscando en menos de 1 minuto he encontrado este enlace:
http://wiki.openwrt.org/doc/uci/network/switch
Échale un ojo >:D
Si ya lo se, nunca pregunto antes de buscar, pero te comprendo xq hay gnt q no. Ese manual es el q segui junto con otro de otro router pero no lo consegui, por eso lo preguntaba, x si alguien sabia hacerlo para este en particular, jeje. Volveré a intentarlo a ver si tengo mas suerte, revisando los puerto que tengo que usar, jeje. Ya os contare ;)
Enviado desde mi GT-I9100 usando Tapatalk 2
Perdón por no contestar antes, pero estaba fuera. Al final ya lo consegui y está funcionando de lujo, si alguien necesita la configuración que me la pida y en cuanto saque un ratillo lo miro y la pongo
Dices que por serial no hace nada?
Prueba a intercambiar TX por RX y viceversa (puede que sea eso), y no tengas miedo que haciendo eso no haces ningún cortocircuito >:D
Ya me cuentas
Joder macho...era eso, jaja. Hasta hoy no pude probarlo, pero desde luego...parezco nuevo. Muchas gracias ;)
Por cierto, ¿sabes como podría configurarlo como router neutro? Había seguido un manual que creaba un par de vlans, pero la otra vez no se si puse algo mal, pero mira en que acabé.
Me alegro haberte ayudado >:D
¿Router neutro? ¿te refieres a ponerlo como repetidor?
El wifi interno de este router por ahora no funciona en modo AP, sin embargo por cable lan funciona de lujo, pero ya sabes que la comodidad del wifi siempre gusta...
Revisa estos links a ver si te ayudan:
https://foro.seguridadwireless.net/openwrt/%28tutorial%29-modo-clienterepetidor-openwrt/
http://wiki.openwrt.org/doc/recipes/relayclient
Me refiero a configurarlo como router neutro, ya que es adsl. Vamos, que un puerto haga del tipico puerto wan de los router neutro. No se si me explico...
Enviado desde mi GT-I9100 usando Tapatalk 2
A ver... como todo en esta vida existe San Google xDD, no sé como se hace eso que me preguntas, pero buscando en menos de 1 minuto he encontrado este enlace:
http://wiki.openwrt.org/doc/uci/network/switch
Échale un ojo >:D
Si ya lo se, nunca pregunto antes de buscar, pero te comprendo xq hay gnt q no. Ese manual es el q segui junto con otro de otro router pero no lo consegui, por eso lo preguntaba, x si alguien sabia hacerlo para este en particular, jeje. Volveré a intentarlo a ver si tengo mas suerte, revisando los puerto que tengo que usar, jeje. Ya os contare ;)
Enviado desde mi GT-I9100 usando Tapatalk 2
Perdón por no contestar antes, pero estaba fuera. Al final ya lo consegui y está funcionando de lujo, si alguien necesita la configuración que me la pida y en cuanto saque un ratillo lo miro y la pongo
Bravo ;D
Pues sería interesante saber como se hace, al menos tengo curiosidad, ¿y serviría es config para cualquier router, o específicamente para éste?
Un saludo
Bravo ;D
Pues sería interesante saber como se hace, al menos tengo curiosidad, ¿y serviría es config para cualquier router, o específicamente para éste?
Un saludo
Me uno a la petición estaría interesante saber como conseguirlo, ando seria como convertilo en neutro.
saludos
Bravo ;D
Pues sería interesante saber como se hace, al menos tengo curiosidad, ¿y serviría es config para cualquier router, o específicamente para éste?
Un saludo
Me uno a la petición estaría interesante saber como conseguirlo, ando seria como convertilo en neutro.
saludos
Perdón, no vi el mensaje de mazingerz80 (culpa del tapatalk, jaja). Pues seguí el manual que hay por la red para OpenWrt, pero lo tube que adaptar para nuestro router en concreto, copio mi configuración:
Entrais por ssh y modificais el fichero /etc/config/network dejandolo de esta manera:
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option _orig_ifname 'eth0.1 wlan0'
option _orig_bridge 'true'
option ifname 'eth0.1'
option ipaddr '192.168.2.1'
config switch
option name 'eth0'
option enable '1'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'eth0'
option vlan '1'
option ports '1 2 3 8t'
config switch_vlan
option device 'eth0'
option vlan '2'
option ports '0 8t'
config interface 'wan'
option ifname 'eth0.2'
option _orig_ifname 'eth0.2'
option _orig_bridge 'false'
option proto 'static'
option ipaddr '192.168.1.33'
option netmask '255.255.255.0'
option gateway '192.168.1.1'
option broadcast '192.168.1.255'
option dns '8.8.8.8 8.8.4.4'
En rojo he señalado la ip del router para nuestra red local, podeis poner la que querais, en verde es donde asigno los puertos para LAN, en mi caso el 1,2 y 3 (que se corresponde con el 2,3 y4, ya que en la carcasa la numeración empieza en 1, pero internamente en 0). En azul está el puerto asignado para WAN, en mi caso el 0 (se corresponde con el 1).
Por último, mi puerto WAN lo tengo configurado con ip fija, pero se podría poner con dhcp para que coja la ip del modem. Para cambiar esto se podría cambiar facilmente desde la propia interfaz, pero sino bastaria con cambiar la parte de color cafe por esto:
option proto 'dhcp'
option dns '8.8.8.8 8.8.4.4'
Poner los dns que querais, yo suelo poner los de google.
Guardamos el fichero y ejecutamos /etc/init.d/network restart o guaramos y reiniciamos el router, lo que más rabia os de.
P.D.1: Recomiendo deshabilidar el dhcp para el interfaz wan, yo lo hice desde el propio interfaz.
P.D.2: Si teneis el cable conectado en el puerto WAN, no podreis acceder al router por la ip interna, tendria que ser por la externa y, además, por defecto el acceso ssh creo que solo está habilitado para la LAN.
P.D.3 (el ultimo, jeje): Ahora para poder abrir puertos desde el puerto WAN hacia un equipo de la LAN, tenesi que ir desde el interfaz a Network > Firewall > Port Fordwarding, crear las reglas es muy facil, pero si teneis problemas, lo decís ;)
Hola a todo el mundo!Buenas,
En primer lugar, quería daros las gracias a todos los que contribuís a este foro, en especial a Noltari y jar229 (y muchos otros) por el grandísimo trabajo que estáis realizando con OpenWRT, así como el código fuente y los tutoriales para compilarlo en el ADB. He seguido al pie de la letra vuestras indicaciones para realizar mi propia compilación y la verdad es que el resultado es fantástico!
Me he metido en el mundo OpenWRT después de estar varios años utilizando DD-WRT en una Fonera y cansado de la falta de actualización y soporte que tienen en esa distribución. OpenWRT siempre me pareció que tenía muy buena pinta, pero me daba respeto todo lo que había que cacharrear para hacerla funcionar. Luego, ya metido en faena, he visto que no era para tanto... Y la flexibilidad y pontencia que te proporciona OpenWRT compensa con creces el esfuerzo realizado.
Para intentar aportar mi granito de arena, intenteré ayudar a neldoreth, pues en principio estaba exactamente en su misma situación... Yo también intenté instalar OpenVPN con la imagen original que compiló Noltari en su primer post, e instalé todos los paquetes necesarios, forzando las dependencias, de las compilaciones de la trunk actual. Sin embargo, el paquete kmod-tun de trunk, que se encarga de crear los puertos TUN/TAP necesarios para que funcione OpenVPN, no funciona correctamente con una compilación de kernel distinta, pues como ya han comentado en muchos posts, las compilaciones de trunk están "vivas" y cambian cada día, por lo que la única manera de tener todos los paquetes compatibles con una versión de desarrollo concreta es bajarte el código fuente y compilartela tú misma. De hecho, eso mismo he hecho yo, y estoy encantado con el resultado, aunque es cierto que la wifi de BRCMSMAC en modo AP todavía tiene muchísimo que mejorar.
Por tanto, neldoreth, te recomiendo que te compiles tu propia compilación, siguiendo los tutoriales de jar229, y podrás instalar cualquier funcionalidad que te haga falta... Eso sí, te recomiendo que tengas un cable de serie a mano, porque es facilísimo brickear estos routers, como indican en el primer post. Si ves que no te atreves con la compilación, quizás podría pasarte los ipks que yo mismo he compilado de esa versión, que imagino que deberían funcionar, aunque no estoy seguro... Si los quieres, mándame un privado y te los envío.
Por otro lado, me gustaría preguntar a los más sabios del lugar precisamente por el problema de brickeo que he tenido con el ADB cuando he hecho mi propia compilación. Seleccioné unas cuantas funcionalidades para que estuvieran directamente en la imagen compilada, y me quedó un fichero de unos 12MB que cabía en la flash del equipo. Sin embargo, tras flashearlo, arranca el CFE y al arrancar el propio Linux, empieza a soltar excepciones, quedándose en bucle y sin cargar:
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xb8010000) ...
**Exception 32: EPC=037FD822, Cause=3C1F8000 (Interrupt)
RA=0000002A, VAddr=00000000
0 ($00) = 009F2022 AT ($01) = 00000000
v0 ($02) = 8C890004 v1 ($03) = 2408000F
a0 ($04) = 01004027 a1 ($05) = 8C8A0004
a2 ($06) = 015E5020 a3 ($07) = 8D2C0000
t0 ($08) = 8D2E0008 t1 ($09) = AD4C0000
t2 ($10) = AD4E0008 t3 ($11) = 21290010
t4 ($12) = 014B082B t5 ($13) = 00000000
t6 ($14) = 34843246 t7 ($15) = 277B0AAC
s0 ($16) = 27FF0F6C s1 ($17) = 80646010
s2 ($18) = 80611EE4 s3 ($19) = 80612210
s4 ($20) = 00000000 s5 ($21) = 80611D68
s6 ($22) = 001F8000 s7 ($23) = 037FD822
t8 ($24) = 80612660 t9 ($25) = 8F7B0024
k0 ($26) = 0360F809 k1 ($27) = 00000000
gp ($28) = 00000000 sp ($29) = 80611F0C
fp ($30) = 00000000 ra ($31) = 0000002A
**Exception 32: EPC=80620E70, Cause=00000020 (Syscall )
RA=27FF0E14, VAddr=00000020
0 ($00) = 0A002020 AT ($01) = 66702028
v0 ($02) = 203D2030 v1 ($03) = 30303020
a0 ($04) = 72612028 a1 ($05) = 203D2030
a2 ($06) = 3032410A a3 ($07) = 0A000000
t0 ($08) = 00000000 t1 ($09) = 8060DF48
t2 ($10) = 00000000 t3 ($11) = 00000000
t4 ($12) = 00000000 t5 ($13) = 0000000A
t6 ($14) = 80737900 t7 ($15) = 8060C9A0
s0 ($16) = 00000000 s1 ($17) = 00000000
s2 ($18) = 80737928 s3 ($19) = 8060EDC4
s4 ($20) = 8060C9A0 s5 ($21) = 00000000
s6 ($22) = 02625A00 s7 ($23) = 8060EE08
t8 ($24) = 8060EDC4 t9 ($25) = 00000000
k0 ($26) = 0000000B k1 ($27) = 00000200
gp ($28) = 8060EF14 sp ($29) = 00000000
fp ($30) = 00000000 ra ($31) = 27FF0E14
**Exception 32: EPC=80620E70, Cause=00000020 (Syscall )
He intentado averiguar por qué ocurre esto, pero no encuentro explicación. Al final, me ha terminado funcionando haciendo una imagen más ligera (unos 9MB) y compilando los paquetes como ipks para instalarlos vía opkg.
¿Sabéis por qué ocurre esto? ¿Existe alguna limitación a nivel de CFE que impida que arranque una imagen que sea mayor de X bytes? ¿Cómo se puede saltar esa limitación?
Muchas gracias y un saludo a todos!
Configuración errónea
Citar
He introducido una mala configuración y ahora no puedo acceder al router.
La solución para este problema consiste en acceder al router en modo failsafe y borrar la partición de la configuración (rootfs_data) para restablecer la configuración inicial del router.
Prerrequisitos: La imagen de OpenWrt flasheada en el router debe ser del tipo squashfs. Si se ha flasheado otro tipo de imagen (jffs2), este proceso no es válido, ya que no se puede recuperar la configuración original.
Para poner el router en modo failsafe hay que realizar el siguiente procedimiento:
1) Apagar el router.
2) Encender el router y presionar y soltar continuamente el botón Reset.
3) Una vez que el LED de estado del router parpadee rápidamente podemos dejar de presionar y soltar el botón Reset (normalmente el LED de estado es el LED de Power).
4) El router ya está en modo failsafe, así que podemos acceder por telnet y restaurar la configuración por defecto:
Código:
telnet 192.168.1.1
mtd erase -r rootfs_data
5) Una vez introducido el comando para borrar la partición rootfs_data, el router se reiniciará sólo y restablecerá la configuración por defecto.
xxxxx: page allocation failure. order:1, mode:0x4020
vm.min_free_kbytes=4096
bueno, gracias a vosotros e conseguido lo que quería en primer lugar daros las gracias
el problema de que no pudiese entrar en los routers parecía ser cosa de Windows, por otro
lado como me dijo jar229 el driver del wifi aun no esta bien del todo por lo tanto le puse un comtred
ct 5361 con openwrt-96348GW-generic-squashfs-cfe_backfire_10.03.1 como neutro conecte el cable de red al puerto 1 del comtred y al puerto cuatro del adb no configure nada en el comtred y funciona perfectamente
vía web puedo entrar en el router maestro y en el adb ......
pero cosa extraña no puedo entrar en el comtred excepto que apague el adb y me conecte por wifi o cable
probe a desactivar el dhcp en el comtred pero nada ¿Sabeis a que se puede deber?
Buenas me estoy iniciando en openwrt y tengo varios problemas
mi router es el adb este lo tengo en conectado al router principal por ethernet para pasar la conexión
le puse el firmware del primer post pero no consigo que me instale la impresora por usb
he probado de compilar mi propio firmware desde virtual box y 4 versiones diferentes de ubuntu pero no hay manera
siempre me tira error la compilación he intentado por ssh el force depend pero ni asi me instala los paquetes usb-printer porque me tira error del kernel como a muchos les pasa
hay algun firm compilado que me deje instaklar la impresora por usb, esto es lo mas importante en mi casa.
también quiero ponerle ddns y servidor web y ftp
por favor ayuda no se que mas probar
pedirme la información que necesiteis
r35763: http://www.mediafire.com/?d6rdjsck4xerplu | Tiene FPU emulation, LuCi, driver wifi brcmsmac, relayd, transmission, p910nd (servidor de impresion), usb-storage, usb-storage-extras, samba, pure-ftp (servidor de ftp), wol, soporte para dispositivos wifi USB con chipset Ralink rt73 y Zydas, etc. |
Tenías pinchado el disco USB al hacer el dmseg ?
Qué formato tiene el disco ?
Qué versión del firmware estás usando ?
¡hola
que ha insertado el disco para dsmeg
El disco y el formato ntfs
firmware r37180
tratando con el comando lsusb me sale este error
unable to initialize libusb: -99
si usted me puede dar una mano estoy agradecido.
¡hola
que ha insertado el disco para dsmeg
El disco y el formato ntfs
firmware r37180
tratando con el comando lsusb me sale este error
unable to initialize libusb: -99
si usted me puede dar una mano estoy agradecido.
Esa compilación no tienes los paquetes necesarios para que te funcione el disco.
Instala esta y nos cuentas ... https://foro.seguridadwireless.net/openwrt/openwrt-en-routers-de-telefonica-home-station-alpha-asl26555-y-adb-p-dg-a4001n1/msg279042/#msg279042 (https://foro.seguridadwireless.net/openwrt/openwrt-en-routers-de-telefonica-home-station-alpha-asl26555-y-adb-p-dg-a4001n1/msg279042/#msg279042)
opkg update
opkg install usbutils
lsusb
El disco duro que conectas tiene alimentación propia o la toma del router ?
Instala usbutilsCódigo: [Seleccionar]opkg update
opkg install usbutils
Luego postea la salida del comandoCódigo: [Seleccionar]lsusb
"unable to initialize libusb: -99"[code]
no se carga en el lugar dmesg del kernel
root@OpenWrt:~# dmesg |grep -i usb
[ 12.792000] usbcore: registered new interface driver usbfs
[ 12.796000] usbcore: registered new interface driver hub
[ 12.804000] usbcore: registered new device driver usb
[ 14.184000] usbcore: registered new interface driver rt73usb
[ 14.232000] usbcore: registered new interface driver rtl8187
[ 14.276000] usbcore: registered new interface driver rt2800usb
[ 17.724000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 18.564000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 18.748000] uhci_hcd: USB Universal Host Controller Interface driver
[ 18.892000] usbcore: registered new interface driver ath9k_htc
[ 19.052000] usbcore: registered new interface driver usblp
[ 19.244000] Initializing USB Mass Storage driver...
[ 19.248000] usbcore: registered new interface driver usb-storage
[ 19.256000] USB Mass Storage support registered.
[ 19.432000] usbcore: registered new interface driver ums-alauda
[ 19.460000] usbcore: registered new interface driver ums-cypress
[ 19.492000] usbcore: registered new interface driver ums-datafab
[ 19.524000] usbcore: registered new interface driver ums-freecom
[ 19.552000] usbcore: registered new interface driver ums-isd200
[ 19.584000] usbcore: registered new interface driver ums-jumpshot
[ 19.616000] usbcore: registered new interface driver ums-karma
[ 19.648000] usbcore: registered new interface driver ums-sddr09
[ 19.680000] usbcore: registered new interface driver ums-sddr55
[ 19.712000] usbcore: registered new interface driver ums-usbat
[ 19.756000] usbcore: registered new interface driver zd1211rw
[/code]
CFE version 1.0.38-106.24 for A4001N TEF 0001 BCM96328 (32bit,SP,BE)
Build Date: Tue Feb 15 14:48:39 CET 2011 (mark@debian)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name MX25L64, id 0xc217 size 8192KB
Total Flash size: 8192K with 2048 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 33554432 bytes (32MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 963281T_TEF
Number of MAC Addresses (1-32) : 11
Base MAC Address : 30:39:f2:5c:fd:a9
PSI Size (1-64) KBytes : 32
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
Voice Board Configuration (0-11) :
Hola a todos lo siento por mi mal español, tengo un problema, mi router no tiene los 16mb a intermitente, ustedes podrían ayudarme
Hola a todos lo siento por mi mal español, tengo un problema, mi router no tiene los 16mb a intermitente, ustedes podrían ayudarmeCódigo: [Seleccionar]CFE version 1.0.38-106.24 for A4001N TEF 0001 BCM96328 (32bit,SP,BE)
Build Date: Tue Feb 15 14:48:39 CET 2011 (mark@debian)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name MX25L64, id 0xc217 size 8192KB
Total Flash size: 8192K with 2048 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 33554432 bytes (32MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 963281T_TEF
Number of MAC Addresses (1-32) : 11
Base MAC Address : 30:39:f2:5c:fd:a9
PSI Size (1-64) KBytes : 32
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
Voice Board Configuration (0-11) :
Buenas,
Soy un poco n00b en el tema y me gustaría saber, de una forma un poco (bastante) sencilla cómo mapear el puerto USB para poder conectarme desde Windows y desde android a este. Gracias ;D
Hola a todos lo siento por mi mal español, tengo un problema, mi router no tiene los 16mb a intermitente, ustedes podrían ayudarme
Antes había diferentes versiones para los routers con 8 y 16 megas.
Ahora no, así que supongo que el firmware del primer post debería ser válido ^-^
Hola a todos lo siento por mi mal español, tengo un problema, mi router no tiene los 16mb a intermitente, ustedes podrían ayudarmeCódigo: [Seleccionar]CFE version 1.0.38-106.24 for A4001N TEF 0001 BCM96328 (32bit,SP,BE)
Build Date: Tue Feb 15 14:48:39 CET 2011 (mark@debian)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name MX25L64, id 0xc217 size 8192KB
Total Flash size: 8192K with 2048 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 33554432 bytes (32MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 963281T_TEF
Number of MAC Addresses (1-32) : 11
Base MAC Address : 30:39:f2:5c:fd:a9
PSI Size (1-64) KBytes : 32
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
Voice Board Configuration (0-11) :
Hay que definir un router con el tamaño de flash del tuyo. Es fácil, así que supongo que hoy podría tenerlo listo. ¿Tiene algún nombre especial ese router?
You have to define a router with the amount of flash of yours. It is easy, so i hope that today could be ready. ¿Has your router a specific name?
Hola a todos lo siento por mi mal español, tengo un problema, mi router no tiene los 16mb a intermitente, ustedes podrían ayudarmeCódigo: [Seleccionar][code]
[/code]
CFE version 1.0.38-106.24 for A4001N TEF 0001 BCM96328 (32bit,SP,BE)
Build Date: Tue Feb 15 14:48:39 CET 2011 (mark@debian)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name MX25L64, id 0xc217 size 8192KB
Total Flash size: 8192K with 2048 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 33554432 bytes (32MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 963281T_TEF
Number of MAC Addresses (1-32) : 11
Base MAC Address : 30:39:f2:5c:fd:a9
PSI Size (1-64) KBytes : 32
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
Voice Board Configuration (0-11) :
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE> f 192.168.1.12:run1.bin
Loading 192.168.1.12:run1.bin ...
Finished loading 8388864 bytes
Illegal image size 8388608. Image size must not be greater than 8249088.
*** command status = -1
Hay que definir un router con el tamaño de flash del tuyo. Es fácil, así que supongo que hoy podría tenerlo listo. ¿Tiene algún nombre especial ese router?
You have to define a router with the amount of flash of yours. It is easy, so i hope that today could be ready. ¿Has your router a specific name?
Hola a todos lo siento por mi mal español, tengo un problema, mi router no tiene los 16mb a intermitente, ustedes podrían ayudarme
Antes había diferentes versiones para los routers con 8 y 16 megas.
Ahora no, así que supongo que el firmware del primer post debería ser válido ^-^
Cuando trato de cargar el firmware r37180 r36114 o me sale un mensaje de que no hay suficiente espacio, y que el archivo supera el tamaño máximo, no estoy en casa para venir publicar el resultado cuando intento cargar.Hola a todos lo siento por mi mal español, tengo un problema, mi router no tiene los 16mb a intermitente, ustedes podrían ayudarmeCódigo: [Seleccionar]CFE version 1.0.38-106.24 for A4001N TEF 0001 BCM96328 (32bit,SP,BE)
Build Date: Tue Feb 15 14:48:39 CET 2011 (mark@debian)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name MX25L64, id 0xc217 size 8192KB
Total Flash size: 8192K with 2048 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 33554432 bytes (32MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 963281T_TEF
Number of MAC Addresses (1-32) : 11
Base MAC Address : 30:39:f2:5c:fd:a9
PSI Size (1-64) KBytes : 32
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
Voice Board Configuration (0-11) :
Hay que definir un router con el tamaño de flash del tuyo. Es fácil, así que supongo que hoy podría tenerlo listo. ¿Tiene algún nombre especial ese router?
You have to define a router with the amount of flash of yours. It is easy, so i hope that today could be ready. ¿Has your router a specific name?
Este router es distribuido por Telefónica Latinoamérica, traté de usar la versión pre-compilada del propio foro, que yo defino este parámetro que Sitou?
Les agradezco a todos el foro no sólo ayuda, sino por la dedicación a la construcción de esta versión de OpenWRT.
git clone git://github.com/Pteridium/openwrt.git -b bcm63xx-r37180
gracias por la ayuda, así que voy a compilar posibles
En este repositorio se ha añadido soporte para el router ADB P.DG A4001 con 8MB de flash.
https://github.com/Pteridium/openwrt/tree/bcm63xx-r37180
https://github.com/Pteridium/openwrt/commit/59e707a92606bb5ce43e621c4ab5a13b9fc617b0
Para descargar el código:Código: [Seleccionar]git clone git://github.com/Pteridium/openwrt.git -b bcm63xx-r37180
La imagen pare ese modelo de ADB se llama "openwrt-963281T_TEF-lat-squashfs-cfe.bin"
Para compilar tu propia imagen sigue este hilo: https://foro.seguridadwireless.net/openwrt/compilar-openwrt-a-nuestro-gusto/, creado por jar229 y que está muy bien explicado.
En este repositorio se ha añadido soporte para el router ADB P.DG A4001 con 8MB de flash.
https://github.com/Pteridium/openwrt/tree/bcm63xx-r37180
https://github.com/Pteridium/openwrt/commit/59e707a92606bb5ce43e621c4ab5a13b9fc617b0
Para descargar el código:Código: [Seleccionar]git clone git://github.com/Pteridium/openwrt.git -b bcm63xx-r37180
La imagen pare ese modelo de ADB se llama "openwrt-963281T_TEF-lat-squashfs-cfe.bin"
Para compilar tu propia imagen sigue este hilo: https://foro.seguridadwireless.net/openwrt/compilar-openwrt-a-nuestro-gusto/, creado por jar229 y que está muy bien explicado.
make[7]: execvp: /bin/sh: Argument list too long
make[7]: *** [/home/lucio/openwrt/trunk/build_dir/target-mips_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.9.8/user_headers/include/linux/.install] Error 127
make[6]: *** [linux] Error 2
make[5]: *** [headers_install] Error 2
make[5]: Leaving directory `/home/lucio/openwrt/trunk/build_dir/target-mips_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.9.8'
make[4]: *** [/home/lucio/openwrt/trunk/build_dir/target-mips_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.9.8/.configured] Error 2
make[4]: Leaving directory `/home/lucio/openwrt/trunk/target/linux/brcm63xx'
make[3]: *** [compile] Error 2
make[3]: Leaving directory `/home/lucio/openwrt/trunk/target/linux'
make[2]: *** [target/linux/compile] Error 2
make[2]: Leaving directory `/home/lucio/openwrt/trunk'
make[1]: *** [/home/lucio/openwrt/trunk/staging_dir/target-mips_uClibc-0.9.33.2/stamp/.target_compile] Error 2
make[1]: Leaving directory `/home/lucio/openwrt/trunk'
make: ** [world] Erro 2
usted me podría ayudar con una pregunta más, que ya se veía en varios blogs sin embargo, y ya intentó una docena de soluciones, pero no entró en vigor, estoy utlizando servidor centos 6.4 32 bits para compilar, y siempre apreseta este error en la compilaciónCódigo: [Seleccionar]make[7]: execvp: /bin/sh: Argument list too long
make[7]: *** [/home/lucio/openwrt/trunk/build_dir/target-mips_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.9.8/user_headers/include/linux/.install] Error 127
make[6]: *** [linux] Error 2
make[5]: *** [headers_install] Error 2
make[5]: Leaving directory `/home/lucio/openwrt/trunk/build_dir/target-mips_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.9.8'
make[4]: *** [/home/lucio/openwrt/trunk/build_dir/target-mips_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.9.8/.configured] Error 2
make[4]: Leaving directory `/home/lucio/openwrt/trunk/target/linux/brcm63xx'
make[3]: *** [compile] Error 2
make[3]: Leaving directory `/home/lucio/openwrt/trunk/target/linux'
make[2]: *** [target/linux/compile] Error 2
make[2]: Leaving directory `/home/lucio/openwrt/trunk'
make[1]: *** [/home/lucio/openwrt/trunk/staging_dir/target-mips_uClibc-0.9.33.2/stamp/.target_compile] Error 2
make[1]: Leaving directory `/home/lucio/openwrt/trunk'
make: ** [world] Erro 2
He leido pero por favor, me puedes aclarar lo que te pregunte.
Gracias.
¿Funciona como modem y router a la vez, puedo utilizarlo igual que con el firm de movistar, es decir sin mas aparatos que el?
Hola, gracias
Habia leido efectivamente pero ya hace un tiempo atras que no funcionaba como modem que necesita un modem a parte, pero queria saber de primera mano a dia de hoy.
Mi idea es meter el firmware de openwrt si me hiciera todo en uno, pero esperare haber si algun dia funciona todo en uno.
Lo de la wifi, se que trabaja como cliente tmb y se le pueden conectar pinchos usb para pillar redes wifi y crear una red wds.
Pero no se, sin embargo, si como wifi punto de acceso como un router convencional, funciona de forma estable, yo tenia un amigo con linksys con openwrt que la wifi, le daba cortes y desaparecia la wifi
Un saludo y gracias.
Hola a todos, me dirijo a todos a tomar un par de preguntas más, recopilados de una docena de versiones de OpenWRT para la versión lat como fui instruido por el amigo Pteridium, no puedo poner ninguna de Manera porque el wifi a trabajar.Citarroot@OpenWrt:/proc/bus/pci# cat devices
0000 14e46328 1f 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport
0100 14e4a8d8 1f 10f00004 0 0 0 0 0 0 4000 0 0 0 0 0 0
alguien me puede ayudar, yo no soy más ideas, agradezco de antemano por la ayuda
Hola, soy nuevo por el foro y tengo un router ADB P.DG A4001N (fijarse que no lleva el ultimo 1) que me lo entregó Movistar, y queria saber si puedo cargarle el mismo firmware Openwrt que al ADB P.DG A4001N1. ¿Serán compatibles?Pruebalo y nos comentas... :-X :-X :-X
Este router, tienes una administración 'avanzada'. Intenta entrar por http://192.168.1.1/main.html
A partir de ahí, busca el sitio para actualizar el firmware.
Pero ojo, que este router tiene tendencia a quedarse 'frito'. Así que, si vas a enredar con el, vete consiguiendo un cable serial ;)
Este router, tienes una administración 'avanzada'. Intenta entrar por http://192.168.1.1/main.html
A partir de ahí, busca el sitio para actualizar el firmware.
Pero ojo, que este router tiene tendencia a quedarse 'frito'. Así que, si vas a enredar con el, vete consiguiendo un cable serial ;)
Ya he visto esa página, anoche estuve haciendo pruebas con el cable serie que tengo pero la consola del puty no me daba ninguna respuesta al encender el modem, configuré los baudios y demás tal y como se indica. El cable serie que tengo es USB con el chip Prolific PL2303 y lo he conectado en los pins que se indican en el primer post. Lo que no se es si hay que hacer los puentes que están en rojo. A ver si alguien que haya utilizado un cable serie similar comenta si ha tenido que hacer los puentes para conectar.
Gracias por tu respuesta ja3229.
Salu2
Este router no se puede configurar como repetidor >:D
Este router no se puede configurar como repetidor >:D
Y usando una tarjeta wifi usb como cliente?
Alquien sabe como usar este router con el firmware de Openwrt con telefonica por pppoe? vamos como cuando te lo dan pero con el firmware mejorado.
El driver que da soporte a la WiFi de este router aún está en desarrollo. Así que ... normal que no vaya en modo 'n'
Enviado desde mi CUBOT GT99 usando Tapatalk
Una pregunta
Tengo un ADB 4001N de Movistar al que le he flasheado la última OpenWRT r38342. Lo he conectado en modo Cliente a través de la red WiFi del router principal que tengo en la planta baja (que es el que da la salida a internet). Y todos los equipos conectados por cable desde el ADB disfrutan de una conexión impecable (prácticamente como si estuvieran conectados al router principal). Pero el problema es que me gustaría ampliar la señal WiFi a la planta superior (mi casa tiene 3 plantas) y no sé si se puede poner en modo repetidor o si entonces se perdería la posibilidad de conectar mis equipos por cable.
De no ser posible (leo que no se puede poner en modo repetidor). ¿Sería posible con un Comtrend 5813N con OpenWRT? Sé que comprando 3 PLCs se solucionaría el problema pero me gustaría intentarlo con los equipos de que dispongo.
si le pones el firmware original de movistar de nuevo, podras tener ADSL
Flashing ANY Firmware
You must set your TCP/IP v4 protocol to:
IP: 192.168.1.2
Netmask: 255.255.255.0
Gateway: 192.168.1.1
DNS: (optional, can be blank).
Then:
Power off the router.
Press reset button near the antenna.
Keep it pressed while powering up during ~20+ seconds.
Acces to http://192.168.1.1 and upload binary file.
Wait until router reboots.
vas a tener que usar el puerto serie para acceder al CFE. En el primer post tienes una imagen de lo que tienes que soldar.
Podrias meterselo directamente desde el menu de movistar, pero si tienes algun problema en algun momento y no tienes acceso al CFE no podras volver al original
es en el menu oculto:
192.168.1.1/main.html
para que quieres los jumper? los puentes los haces directamente con el soldador y las conexiones ya van directas al USB2TTL.
Yo tengo el router con los 3 cables necesarios por fuera del router, para no tener que abrir, y si tengo que recuperarlo, uso unos cables-pinza para conectarlos y no tengo ni que soldar
a eso me referia, solo necesitas TX,RX y GND. Yo los tengo soldados a los cables que te he dicho
Pues yo entrando en http://192.168.1.1:8000 y luego en firmware upgrade cargo el firm de la primera página del post y me dice que no es un formato valido para actualizar. El router es un ASL-26555.
Saludos¡¡¡
=== IMPORTANT ============================
Use 'passwd' to set your login password
this will disable telnet and enable SSH
------------------------------------------
BusyBox v1.19.4 (2014-01-16 18:53:13 PST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r39304)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# passwd
Changing password for root
New password:
Bad password: too weak
Retype password:
Password for root changed by root
root@OpenWrt:/#
passwd: /etc/passwd: Read-only file system
passwd: can't update password file /etc/passwd
pero al introducirmount_root
me dejo cambiar el password supuestamente pero no puedo acceder a SSH
Hola buenas, tenia este router con openwrt decidí actualizarlo desde la actualización de firmware de Openwrt. Ahora no sale luci ni puedo acceder por ssh.¿Qué firmware le has metido?
Si lo reinicio con el botón de reset pulsado (el led parpadea), sí puedo acceder mediante telnet.
¿puedo volver a tener acceso a ssh y luci?Código: [Seleccionar]=== IMPORTANT ============================
Use 'passwd' to set your login password
this will disable telnet and enable SSH
------------------------------------------
BusyBox v1.19.4 (2014-01-16 18:53:13 PST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r39304)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# passwd
Changing password for root
New password:
Bad password: too weak
Retype password:
Password for root changed by root
root@OpenWrt:/#
sysupgrade firmware.bin
openwrt-963281T_TEF-generic-squashfs-cfe.bin
creo que es sin luci, el problema el no poder acceder por ssh para instalar luci por comando. Como puedo meterle el firm por telnet es desde putty??? tampoco me funciona el modo rescate CFEGracias por tu pronta respuesta, si le metiCódigo: [Seleccionar]openwrt-963281T_TEF-generic-squashfs-cfe.bin
creo que es sin luci, el problema el no poder acceder por ssh para instalar luci por comando. Como puedo meterle el firm por telnet es desde putty??? tampoco me funciona el modo rescate CFE
Espero no tener que soldar ... para el serial.
Hola a todos.
Solo una pregunta, ¿la broadcom de este cacharro admite repeater o wds?
Se que no, pero por asegurar.
Salud.
Enviado desde mi GT-N7100 usando Tapatalk 2
Gracias por tu pronta respuesta, si le metiCódigo: [Seleccionar]openwrt-963281T_TEF-generic-squashfs-cfe.bin
creo que es sin luci, el problema el no poder acceder por ssh para instalar luci por comando. Como puedo meterle el firm por telnet es desde putty??? tampoco me funciona el modo rescate CFE
Espero no tener que soldar ... para el serial.
Antes de poder acceder por ssh, hay que hacer una primera conexión usando telnet y poner el password ;)Hola a todos.
Solo una pregunta, ¿la broadcom de este cacharro admite repeater o wds?
Se que no, pero por asegurar.
Salud.
Enviado desde mi GT-N7100 usando Tapatalk 2
No con la wifi interna no se puede poner en modo repetidor. Pero siempre puedes 'pincharle' alguna wifi al usb ;D
hola , si hace como si cambiara el pasword lo reinicio con reboot y no sale nada ni por ssh ni por telnet , despues solo me deja entrar por telnet despues de reset (no entra a cfe tampoco). Gracias de antemano.¿Puedes poner un dmesg?
dmesg
[ 0.000000] Linux version 3.10.26 (openwrt@snapon) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39304) ) #1 Thu Jan 16 19:00:37 PST 2014
[ 0.000000] unknown BCM6328 variant: 0
[ 0.000000] Detected Broadcom 0x6328 CPU revision b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V000
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80312ce0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 28680k/32768k available (2462k kernel code, 4088k reserved, 721k data, 268k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.036000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.288000] registering PCI controller with io_map_base unset
[ 0.304000] bio: create slab <bio-0> at 0
[ 0.312000] PCI host bridge to bus 0000:00
[ 0.316000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
[ 0.320000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.324000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.328000] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
[ 0.328000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.328000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.332000] pci 0000:01:00.0: [14e4:a8d8] type 00 class 0x028000
[ 0.332000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.332000] pci 0000:01:00.0: supports D1 D2
[ 0.332000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.332000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.332000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.336000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.340000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.344000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.348000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.352000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.368000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.376000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.380000] TCP: Hash tables configured (established 512 bind 512)
[ 0.388000] TCP: reno registered
[ 0.392000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.396000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.404000] NET: Registered protocol family 1
[ 0.408000] PCI: CLS 0 bytes, default 16
[ 0.412000] audit: initializing netlink socket (disabled)
[ 0.416000] type=2000 audit(0.416:1): initialized
[ 0.424000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.428000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.440000] msgmni has been set to 56
[ 0.444000] io scheduler noop registered
[ 0.448000] io scheduler deadline registered (default)
[ 0.456000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.464000] console [ttyS0] enabled, bootconsole disabled
[ 0.480000] m25p80 spi1.0: found mx25l12805d, expected m25p80
[ 0.488000] m25p80 spi1.0: mx25l12805d (16384 Kbytes)
[ 0.492000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.500000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.508000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
[ 0.516000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length ec0000
[ 0.524000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.528000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.536000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.544000] 5 bcm63xxpart partitions found on MTD device spi1.0
[ 0.552000] Creating 5 MTD partitions on "spi1.0":
[ 0.556000] 0x000000000000-0x000000010000 : "CFE"
[ 0.564000] 0x000000010100-0x000000130000 : "kernel"
[ 0.568000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.584000] 0x000000130000-0x000000ff0000 : "rootfs"
[ 0.592000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.596000] mtd: partition "rootfs_data" created automatically, ofs=0x2e0000, len=0xd10000
[ 0.608000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.616000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.624000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.672000] b53_common: found switch: BCM63xx, rev 0
[ 0.680000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.692000] TCP: cubic registered
[ 0.696000] NET: Registered protocol family 17
[ 0.700000] Bridge firewalling registered
[ 0.704000] can: controller area network core (rev 20120528 abi 9)
[ 0.712000] NET: Registered protocol family 29
[ 0.716000] 8021q: 802.1Q VLAN Support v1.8
[ 0.732000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.744000] Freeing unused kernel memory: 268K (8032d000 - 80370000)
[ 4.704000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 5.832000] Button Hotplug driver version 0.4.1
[ 5.844000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 8.816000] jffs2: notice: (215) jffs2_build_xattr_subsystem: complete building xattr subsystem, 18 of xdatum (0 unchecked, 17 orphan) and 28 of xref (0 dead, 23 orphan) found.
[ 10.396000] NET: Registered protocol family 10
[ 10.412000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 10.420000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 10.428000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 10.436000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 10.444000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 10.536000] bcma: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[ 10.544000] bcma: bus0: Using fallback SPROM failed (err -2)
[ 10.548000] bcma: bus0: No SPROM available
[ 10.564000] bcma: bus0: Bus registered
[ 10.584000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
[ 10.604000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.636000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093
[ 10.644000] Backport generated by backports.git backports-20130802-0-gdb67a3f
[ 10.660000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.736000] xt_time: kernel timezone is -0000
[ 10.820000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.872000] cfg80211: World regulatory domain updated:
[ 10.876000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.884000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.892000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.900000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.908000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 10.916000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 10.924000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 11.004000] PPP generic driver version 2.4.2
[ 11.012000] NET: Registered protocol family 24
[ 11.068000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 11.076000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
[ 11.084000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 11.100000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.988000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.420000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.432000] device eth0.1 entered promiscuous mode
[ 20.436000] device eth0 entered promiscuous mode
[ 20.440000] br-lan: port 1(eth0.1) entered forwarding state
[ 20.448000] br-lan: port 1(eth0.1) entered forwarding state
[ 21.412000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 22.452000] br-lan: port 1(eth0.1) entered forwarding state
[ 77.428000] bcm63xx_enetsw bcm63xx_enetsw.0: link DOWN on Port 4
[ 88.432000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 824.440000] bcm63xx_enetsw bcm63xx_enetsw.0: link DOWN on Port 4
[ 842.444000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 1224.608000] br-lan: port 1(eth0.1) entered disabled state
[ 1224.624000] device eth0.1 left promiscuous mode
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.10.26 (openwrt@snapon) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39304) ) #1 Thu Jan 16 19:00:37 PST 2014
[ 0.000000] unknown BCM6328 variant: 0
[ 0.000000] Detected Broadcom 0x6328 CPU revision b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V000
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80312ce0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 28680k/32768k available (2462k kernel code, 4088k reserved, 721k data, 268k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.036000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.288000] registering PCI controller with io_map_base unset
[ 0.304000] bio: create slab <bio-0> at 0
[ 0.312000] PCI host bridge to bus 0000:00
[ 0.316000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
[ 0.320000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.324000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.328000] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
[ 0.328000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.328000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.332000] pci 0000:01:00.0: [14e4:a8d8] type 00 class 0x028000
[ 0.332000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.332000] pci 0000:01:00.0: supports D1 D2
[ 0.332000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.332000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.332000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.336000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.340000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.344000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.348000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.352000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.368000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.376000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.380000] TCP: Hash tables configured (established 512 bind 512)
[ 0.388000] TCP: reno registered
[ 0.392000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.396000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.404000] NET: Registered protocol family 1
[ 0.408000] PCI: CLS 0 bytes, default 16
[ 0.412000] audit: initializing netlink socket (disabled)
[ 0.416000] type=2000 audit(0.416:1): initialized
[ 0.424000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.428000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.440000] msgmni has been set to 56
[ 0.444000] io scheduler noop registered
[ 0.448000] io scheduler deadline registered (default)
[ 0.456000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.464000] console [ttyS0] enabled, bootconsole disabled
[ 0.480000] m25p80 spi1.0: found mx25l12805d, expected m25p80
[ 0.488000] m25p80 spi1.0: mx25l12805d (16384 Kbytes)
[ 0.492000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.500000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.508000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
[ 0.516000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length ec0000
[ 0.524000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.528000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.536000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.544000] 5 bcm63xxpart partitions found on MTD device spi1.0
[ 0.552000] Creating 5 MTD partitions on "spi1.0":
[ 0.556000] 0x000000000000-0x000000010000 : "CFE"
[ 0.564000] 0x000000010100-0x000000130000 : "kernel"
[ 0.568000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.584000] 0x000000130000-0x000000ff0000 : "rootfs"
[ 0.592000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.596000] mtd: partition "rootfs_data" created automatically, ofs=0x2e0000, len=0xd10000
[ 0.608000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.616000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.624000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.672000] b53_common: found switch: BCM63xx, rev 0
[ 0.680000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.692000] TCP: cubic registered
[ 0.696000] NET: Registered protocol family 17
[ 0.700000] Bridge firewalling registered
[ 0.704000] can: controller area network core (rev 20120528 abi 9)
[ 0.712000] NET: Registered protocol family 29
[ 0.716000] 8021q: 802.1Q VLAN Support v1.8
[ 0.732000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.744000] Freeing unused kernel memory: 268K (8032d000 - 80370000)
[ 4.704000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 5.832000] Button Hotplug driver version 0.4.1
[ 5.844000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 8.816000] jffs2: notice: (215) jffs2_build_xattr_subsystem: complete building xattr subsystem, 18 of xdatum (0 unchecked, 17 orphan) and 28 of xref (0 dead, 23 orphan) found.
[ 10.396000] NET: Registered protocol family 10
[ 10.412000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 10.420000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 10.428000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 10.436000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 10.444000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 10.536000] bcma: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[ 10.544000] bcma: bus0: Using fallback SPROM failed (err -2)
[ 10.548000] bcma: bus0: No SPROM available
[ 10.564000] bcma: bus0: Bus registered
[ 10.584000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
[ 10.604000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.636000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093
[ 10.644000] Backport generated by backports.git backports-20130802-0-gdb67a3f
[ 10.660000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.736000] xt_time: kernel timezone is -0000
[ 10.820000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.872000] cfg80211: World regulatory domain updated:
[ 10.876000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.884000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.892000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.900000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.908000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 10.916000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 10.924000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 11.004000] PPP generic driver version 2.4.2
[ 11.012000] NET: Registered protocol family 24
[ 11.068000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 11.076000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
[ 11.084000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 11.100000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.988000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.420000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 20.432000] device eth0.1 entered promiscuous mode
[ 20.436000] device eth0 entered promiscuous mode
[ 20.440000] br-lan: port 1(eth0.1) entered forwarding state
[ 20.448000] br-lan: port 1(eth0.1) entered forwarding state
[ 21.412000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 22.452000] br-lan: port 1(eth0.1) entered forwarding state
[ 77.428000] bcm63xx_enetsw bcm63xx_enetsw.0: link DOWN on Port 4
[ 88.432000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 824.440000] bcm63xx_enetsw bcm63xx_enetsw.0: link DOWN on Port 4
[ 842.444000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 1224.608000] br-lan: port 1(eth0.1) entered disabled state
[ 1224.624000] device eth0.1 left promiscuous mode
[ 1224.628000] device eth0 left promiscuous mode
[ 1224.632000] br-lan: port 1(eth0.1) entered disabled state
[ 1224.680000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 1224.692000] device eth0.1 entered promiscuous mode
[ 1224.700000] device eth0 entered promiscuous mode
[ 1224.720000] br-lan: port 1(eth0.1) entered forwarding state
[ 1224.724000] br-lan: port 1(eth0.1) entered forwarding state
[ 1225.612000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 1226.728000] br-lan: port 1(eth0.1) entered forwarding state
[ 1697.232000] br-lan: port 1(eth0.1) entered disabled state
[ 1697.280000] device eth0.1 left promiscuous mode
[ 1697.284000] device eth0 left promiscuous mode
[ 1697.288000] br-lan: port 1(eth0.1) entered disabled state
[ 1697.332000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 1697.348000] device eth0.1 entered promiscuous mode
[ 1697.352000] device eth0 entered promiscuous mode
[ 1697.420000] br-lan: port 1(eth0.1) entered forwarding state
[ 1697.424000] br-lan: port 1(eth0.1) entered forwarding state
[ 1698.280000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 1699.428000] br-lan: port 1(eth0.1) entered forwarding state
[ 0.000000] Linux version 3.10.28 (thepeople@trabant) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39404) ) #1 Tue Jan 28 06:27:10 CET 2014
[ 0.000000] unknown BCM6328 variant: 0
[ 0.000000] Detected Broadcom 0x6328 CPU revision b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V000
[ 0.000000] No bcm_tag found!
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80312ce0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 28680k/32768k available (2466k kernel code, 4088k reserved, 717k data, 268k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.036000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.288000] registering PCI controller with io_map_base unset
[ 0.304000] bio: create slab <bio-0> at 0
[ 0.312000] PCI host bridge to bus 0000:00
[ 0.316000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
[ 0.320000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.324000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.328000] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
[ 0.328000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.328000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.332000] pci 0000:01:00.0: [14e4:a8d8] type 00 class 0x028000
[ 0.332000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.332000] pci 0000:01:00.0: supports D1 D2
[ 0.332000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.332000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.332000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.336000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.340000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.344000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.348000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.352000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.368000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.376000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.380000] TCP: Hash tables configured (established 512 bind 512)
[ 0.388000] TCP: reno registered
[ 0.392000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.396000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.404000] NET: Registered protocol family 1
[ 0.408000] PCI: CLS 0 bytes, default 16
[ 0.412000] audit: initializing netlink socket (disabled)
[ 0.416000] type=2000 audit(0.416:1): initialized
[ 0.424000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.428000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.440000] msgmni has been set to 56
[ 0.444000] io scheduler noop registered
[ 0.448000] io scheduler deadline registered (default)
[ 0.456000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.464000] console [ttyS0] enabled, bootconsole disabled
[ 0.480000] m25p80 spi1.0: found mx25l12805d, expected m25p80
[ 0.488000] m25p80 spi1.0: mx25l12805d (16384 Kbytes)
[ 0.492000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281TAN
[ 0.500000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.508000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
[ 0.516000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length ec0000
[ 0.524000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.528000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.536000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.544000] 5 bcm63xxpart partitions found on MTD device spi1.0
[ 0.552000] Creating 5 MTD partitions on "spi1.0":
[ 0.556000] 0x000000000000-0x000000010000 : "CFE"
[ 0.564000] 0x000000010100-0x000000130000 : "kernel"
[ 0.568000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.584000] 0x000000130000-0x000000ff0000 : "rootfs"
[ 0.592000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.596000] mtd: partition "rootfs_data" created automatically, ofs=0x2e0000, len=0xd10000
[ 0.608000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.616000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.620000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.672000] b53_common: found switch: BCM63xx, rev 0
[ 0.676000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.692000] TCP: cubic registered
[ 0.696000] NET: Registered protocol family 17
[ 0.700000] Bridge firewalling registered
[ 0.704000] can: controller area network core (rev 20120528 abi 9)
[ 0.712000] NET: Registered protocol family 29
[ 0.716000] 8021q: 802.1Q VLAN Support v1.8
[ 0.732000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.744000] Freeing unused kernel memory: 268K (8032d000 - 80370000)
[ 4.620000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 4.628000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 2, 100Mbps, full-duplex
[ 4.636000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
[ 4.644000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 5.828000] Button Hotplug driver version 0.4.1
[ 5.836000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 8.820000] jffs2: notice: (216) jffs2_build_xattr_subsystem: complete building xattr subsystem, 16 of xdatum (1 unchecked, 15 orphan) and 45 of xref (0 dead, 39 orphan) found.
[ 12.892000] NET: Registered protocol family 10
[ 12.928000] usbcore: registered new interface driver usbfs
[ 12.936000] usbcore: registered new interface driver hub
[ 12.940000] usbcore: registered new device driver usb
[ 12.956000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 12.960000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 12.968000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 12.976000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 12.988000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 13.076000] bcma: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[ 13.084000] bcma: bus0: Using fallback SPROM failed (err -2)
[ 13.092000] bcma: bus0: No SPROM available
[ 13.108000] bcma: bus0: Bus registered
[ 13.124000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
[ 13.144000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.184000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 13.292000] ohci-platform ohci-platform: Generic Platform OHCI Controller
[ 13.296000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 1
[ 13.304000] ohci-platform ohci-platform: irq 49, io mem 0xb0002600
[ 13.376000] hub 1-0:1.0: USB hub found
[ 13.380000] hub 1-0:1.0: 1 port detected
[ 13.408000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093
[ 13.416000] Backport generated by backports.git backports-20130802-0-gdb67a3f
[ 13.452000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.584000] xt_time: kernel timezone is -0000
[ 13.604000] usbcore: registered new interface driver zd1201
[ 13.736000] cfg80211: Calling CRDA to update world regulatory domain
[ 13.744000] cfg80211: World regulatory domain updated:
[ 13.748000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.756000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.764000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.772000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.780000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 13.788000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 13.796000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 13.836000] usb 1-1: new full-speed USB device number 2 using ohci-platform
[ 13.848000] PPP generic driver version 2.4.2
[ 13.864000] NET: Registered protocol family 24
[ 13.884000] usbcore: registered new interface driver rtl8187
[ 13.908000] usbcore: registered new interface driver zd1211rw
[ 14.316000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 14.324000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
[ 14.332000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 14.360000] usbcore: registered new interface driver brcmfmac
[ 14.556000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.768000] usbcore: registered new interface driver ath9k_htc
[ 18.596000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 18.604000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 2, 100Mbps, full-duplex
[ 18.612000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
[ 18.620000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 23.928000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 23.936000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 2, 100Mbps, full-duplex
[ 23.944000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 3, 100Mbps, full-duplex
[ 23.952000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 23.980000] device eth0.1 entered promiscuous mode
[ 23.984000] device eth0 entered promiscuous mode
[ 24.016000] br-lan: port 1(eth0.1) entered forwarding state
[ 24.020000] br-lan: port 1(eth0.1) entered forwarding state
[ 24.924000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 26.024000] br-lan: port 1(eth0.1) entered forwarding state
Muchísimas gracias y un saludo!
Hola me contesto yo mismo con mi solución. Os la mando por si alguien quiere hacer algo parecido.
He compilado openwrt, desde la versión que hay en el primer post:
Es sencillo si tienes una máquina gnu dónde compliar:
git clone git://github.com/openwrt-es/openwrt.git -b bcm63xx-r38342
make menuconfig
Seleccionar bcm63xx
buscar el modulo de kmod-tun y seleccionarlo como módulo
make
Esperar un buen rato
find . -name kmod-tun\*
y copio el módulo al router con scp
root@router:/tmp# opkg install ./kmod-tun_3.10.13-1_brcm63xx.ipk
Installing kmod-tun (3.10.13-1) to root...
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-tun:
* kernel (= 3.10.13-1-4b2f68456e93164bec804efcf3e37d02) *
* opkg_install_cmd: Cannot install package kmod-tun.
root@router:/tmp# uname -a
Linux AmsEgm 3.10.13 #1 Wed Oct 9 01:41:39 CEST 2013 mips GNU/Linux
root@AmsEgm:/tmp# opkg list-installed | grep kernel
kernel - 3.10.13-1-14e59cb8bc0a52b39ccd7fe9bad12ecc
root@router:/tmp# opkg --force-depends install ./kmod-tun_3.10.13-1_brcm63xx.ipk
Installing kmod-tun (3.10.13-1) to root...
Configuring kmod-tun.
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-tun:
* kernel (= 3.10.13-1-4b2f68456e93164bec804efcf3e37d02) *
root@AmsEgm:/tmp# rmmod tun
root@AmsEgm:/tmp# modprobe tun
Y a correr.
Openvpn ya funciona y no se cuelga.
Saludos
i$
root@OpenWrt:~# mount -t vfat /dev/sda1 /mnt/sda1/
mount: mounting /dev/sda1 on /mnt/sda1/ failed: No such device
Después de intentar montar el pen en fat32, echa un ojo al log del router (con el comando dmesg) a ver si dice algo ... ^-^[ 0.000000] Linux version 3.10.13 (noltari@skynet) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38342) ) #1 Wed Oct 9 01:41:39 CEST 2013
[ 7.424000] scsi0 : usb-storage 1-1:1.0
[ 8.796000] scsi 0:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS
[ 8.808000] sd 0:0:0:0: [sda] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
[ 8.820000] sd 0:0:0:0: [sda] Write Protect is off
[ 8.824000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 8.824000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.832000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.840000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.848000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.856000] sda: sda1
[ 8.864000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.868000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.876000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Holaaa!
He de decir primero que muchas gracias por este curro que he visto que os habeis montao para poder instalar openwrt en este router.
Gracias a vosotros he podido instalar openwrt sin problemas, he conseguido conectarlo por wifi, hacer un servidor de impresion y hacer un servidor de archivos con samba. Pero con este ultimo he tenido un problema:
He conseguido compartir un pen en formato ext4 y va muy bien, pero al probar con el formato fat, me detecta el pendrive (lo veo con el comando ls /dev/sd*) pero no me deja montarlo, me dice "no such device"Código: [Seleccionar]root@OpenWrt:~# mount -t vfat /dev/sda1 /mnt/sda1/
mount: mounting /dev/sda1 on /mnt/sda1/ failed: No such device
kmod-fs-ext4
kmod-fs-ntfs
kmod-fs-vfat
kmod-nls-base
kmod-nls-cp1250
kmod-nls-cp437
kmod-nls-cp850
kmod-nls-cp852
kmod-nls-iso8859-1
kmod-nls-iso8859-15
kmod-nls-utf8
asi es, se que me lo detecta, de hecho lo he podido montar y compartir en formato ext4, pero en fat nada, y es el que necesito para poder coenectarlo a mi tv.Citar[ 7.424000] scsi0 : usb-storage 1-1:1.0
[ 8.796000] scsi 0:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS
[ 8.808000] sd 0:0:0:0: [sda] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
[ 8.820000] sd 0:0:0:0: [sda] Write Protect is off
[ 8.824000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 8.824000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.832000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.840000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.848000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.856000] sda: sda1
[ 8.864000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.868000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.876000] sd 0:0:0:0: [sda] Attached SCSI removable disk
El pendrive lo 've' perfectamente.
Has ejecutado el comando para montarlo antes de sacar el log ?
kmod-fs-ext4
kmod-fs-ntfs
kmod-fs-vfat
kmod-nls-base
kmod-nls-cp1250
kmod-nls-cp437
kmod-nls-cp850
kmod-nls-cp852
kmod-nls-iso8859-1
kmod-nls-iso8859-15
kmod-nls-utf8
Citar[ 7.424000] scsi0 : usb-storage 1-1:1.0
[ 8.796000] scsi 0:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS
[ 8.808000] sd 0:0:0:0: [sda] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
[ 8.820000] sd 0:0:0:0: [sda] Write Protect is off
[ 8.824000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 8.824000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.832000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.840000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.848000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.856000] sda: sda1
[ 8.864000] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.868000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.876000] sd 0:0:0:0: [sda] Attached SCSI removable disk
El pendrive lo 've' perfectamente.
Has ejecutado el comando para montarlo antes de sacar el log ?
La instalación de módulos dependientes del kernel, no suele funcionar forzando las dependencias (está explicado en las FAQ).la ultima que habeis puesto en el post principal, la r38342
Si quieres hacer servir el pendrive con formato FAT32 tendrás que usar un firmware que incluya los paquetes necesarios.
Qué compilación estás usando ?
La instalación de módulos dependientes del kernel, no suele funcionar forzando las dependencias (está explicado en las FAQ).la ultima que habeis puesto en el post principal, la r38342
Si quieres hacer servir el pendrive con formato FAT32 tendrás que usar un firmware que incluya los paquetes necesarios.
Qué compilación estás usando ?
uff, tengo que añadirle algo al tutorial que tu hiciste para que funcione en este router? es que no se nada de este tema, y he leido que hacen falta algunos parches o algo asi
uff, tengo que añadirle algo al tutorial que tu hiciste para que funcione en este router? es que no se nada de este tema, y he leido que hacen falta algunos parches o algo asi
Si usas el repositorio de Noltari, no tienes que parchear nada:
git clone git://github.com/openwrt-es/barrier-breaker-openwrt.git -b barrier-breaker_13.12
uff, tengo que añadirle algo al tutorial que tu hiciste para que funcione en este router? es que no se nada de este tema, y he leido que hacen falta algunos parches o algo asi
Si usas el repositorio de Noltari, no tienes que parchear nada:
git clone git://github.com/openwrt-es/barrier-breaker-openwrt.git -b barrier-breaker_13.12
Hace mucho que no compilo nada para este router, pero sí, el procedimiento es ese.creo que te refieres al target profile, me salen:
En los profiles (después de hacer make menu_config), no has visto nada del ADB ?
bueno te cuento como voy:Hace mucho que no compilo nada para este router, pero sí, el procedimiento es ese.creo que te refieres al target profile, me salen:
En los profiles (después de hacer make menu_config), no has visto nada del ADB ?
broadcom wifi (default)
broadcom BCM43xx wifi (wl, proprietary)
atheros wifi (default)
ralink wifi
No wifi (BCM6338)
broadcom wifi (brcmsmac)
tecom gwx00
hw556 wifi
la compilacion la hice con el segundo, que es el que indicas en el tutorial.
bueno te cuento como voy:
he estado probando con los target profile que he mencionado antes y al final he compilado con el de "broadcom wifi (brcmsmac)" y ya me funciona el wifi.
Me reconoce el pen, me reconoce el formato vfat, etc... todo, pero al mandar el comando "mount -t vfat /dev..."
me dice "invalid argument"
ejecuto el comando "dmesg" y veo que al final me salta el error "[ 238.100000] FAT-fs (sda1): IO charset iso8859-1 not found", asi que supongo que tendre que instalar el modulo "kmod-nls-iso8859-1" compilando de nuevo, hoy no tengo mas tiempo para seguir trasteando asi que lo hare mañana
Muchas gracias por todo, te seguire informando
jar muchas gracias por todo, ya he conseguido montar el pen con formato fat y compartirlo ;D, pero en el ordenador no tengo permisos de escritura :'(
ya he intentado un monton de cosas pero no lo consigo
chmod 777 /mnt/fat32
ya he hecho eso, yo lo tengo montado en /mnt/sda1, pongo el comando:
jar muchas gracias por todo, ya he conseguido montar el pen con formato fat y compartirlo ;D, pero en el ordenador no tengo permisos de escritura :'(
ya he intentado un monton de cosas pero no lo consigo
Supongo que te refieres a que no puedes escribir en el pendrive usando samba, no ?
En el hilo del hg553 (https://foro.seguridadwireless.net/openwrt/instalacion-(facil)-de-openwrt-en-huawei-553/) tienes expicado el proceso completo.
Lo más seguro es que sea un tema de permisos. Prueba haciendo esto desde puttyCódigo: [Seleccionar]chmod 777 /mnt/fat32
Debes cambiar /fat32 por el nombre de la carpeta dónde montes el pendrive.
chmod 777 /mnt/sda1
pero nada, sigue sin darme permisos de escritura
ya he hecho eso, yo lo tengo montado en /mnt/sda1, pongo el comando:Código: [Seleccionar]chmod 777 /mnt/sda1
pero nada, sigue sin darme permisos de escritura
Cual es el comando que usas para montar el pendrive ?
Tienes correctamente configurado el usuario/password y los permisos de samba ?
Si accedes por ftp (con tu usuario y password), puedes escribir en el pendrive ?
mount -t vfat /dev/sda1 /mnt/sda1
Creo que no es un error de samba, sino un error al montar porque nada mas montar ejecuto el comando dmesg y al final me sale:FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
He probado otro pendrive, y ya no me sale ese mensaje en el dmesg, pero sigo sin tener permisos de escritura.
Pues el comando que uso para montar es:Código: [Seleccionar]mount -t vfat /dev/sda1 /mnt/sda1
Creo que no es un error de samba, sino un error al montar porque nada mas montar ejecuto el comando dmesg y al final me sale:Código: [Seleccionar]FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
He probado otro pendrive, y ya no me sale ese mensaje en el dmesg, pero sigo sin tener permisos de escritura.
Pues el comando que uso para montar es:Código: [Seleccionar]mount -t vfat /dev/sda1 /mnt/sda1
Creo que no es un error de samba, sino un error al montar porque nada mas montar ejecuto el comando dmesg y al final me sale:Código: [Seleccionar]FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Me he dado cuenta tambien que si comparto "/mnt/sda1" sin tener montado el pen, si que tengo permisos de escritura, pero en cuanto monto el pen... adios permisos
ssh jose@192.168.1.10
y ejecuto el comando mkdir hola
y me dice que nanai, que no tengo permisos con este usuarioHe probado otro pendrive, y ya no me sale ese mensaje en el dmesg, pero sigo sin tener permisos de escritura.
Pues el comando que uso para montar es:Código: [Seleccionar]mount -t vfat /dev/sda1 /mnt/sda1
Creo que no es un error de samba, sino un error al montar porque nada mas montar ejecuto el comando dmesg y al final me sale:Código: [Seleccionar]FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Me he dado cuenta tambien que si comparto "/mnt/sda1" sin tener montado el pen, si que tengo permisos de escritura, pero en cuanto monto el pen... adios permisos
He entrado por ssh con el usuario que cree para samba siguiendo tu tutorialCódigo: [Seleccionar]ssh jose@192.168.1.10
y ejecuto el comandoCódigo: [Seleccionar]mkdir hola
y me dice que nanai, que no tengo permisos con este usuario
asi que supongo que el problema es que el usuario que cree (jose) no tiene permisos de escritura
He probado otro pendrive, y ya no me sale ese mensaje en el dmesg, pero sigo sin tener permisos de escritura.
Pues el comando que uso para montar es:Código: [Seleccionar]mount -t vfat /dev/sda1 /mnt/sda1
Creo que no es un error de samba, sino un error al montar porque nada mas montar ejecuto el comando dmesg y al final me sale:Código: [Seleccionar]FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Me he dado cuenta tambien que si comparto "/mnt/sda1" sin tener montado el pen, si que tengo permisos de escritura, pero en cuanto monto el pen... adios permisos
He entrado por ssh con el usuario que cree para samba siguiendo tu tutorialCódigo: [Seleccionar]ssh jose@192.168.1.10
y ejecuto el comandoCódigo: [Seleccionar]mkdir hola
y me dice que nanai, que no tengo permisos con este usuario
asi que supongo que el problema es que el usuario que cree (jose) no tiene permisos de escritura
Por fiiiin ;D ;D
buscando y buscando al final he dado con este forero que le pasaba lo mismo que a mi:
https://foro.seguridadwireless.net/openwrt/instalacion-%28facil%29-de-openwrt-en-huawei-553/msg255048/#msg255048
el tema es que al montar el pen en formato fat se pierden los permisos de escritura y no te deja cambiarlos
asi que la solucion que encontró este forero fue añadir como usuario de samba al root y ya va perfecto
los cambios que hay que hacer son:
En la configuracion del template de samba modificar la opcion de "invalid user = root" por "invalid user = no"
ponerle una contraseña de samba al root ---> smbpasswd -a root
y modificar el /etc/config/samba añadiendole el usuario root
muchas gracias jar por tu ayuda y tiempo
adduser -H administrador
Con esto nos crea el usuario administrador sin crear su directorio home. Le ponemos contraseña.smbpasswd -a administrador
Agregamos ese usuario a samba y le ponemos la misma contraseña.
Por fiiiin ;D ;D
buscando y buscando al final he dado con este forero que le pasaba lo mismo que a mi:
https://foro.seguridadwireless.net/openwrt/instalacion-%28facil%29-de-openwrt-en-huawei-553/msg255048/#msg255048
el tema es que al montar el pen en formato fat se pierden los permisos de escritura y no te deja cambiarlos
asi que la solucion que encontró este forero fue añadir como usuario de samba al root y ya va perfecto
los cambios que hay que hacer son:
En la configuracion del template de samba modificar la opcion de "invalid user = root" por "invalid user = no"
ponerle una contraseña de samba al root ---> smbpasswd -a root
y modificar el /etc/config/samba añadiendole el usuario root
muchas gracias jar por tu ayuda y tiempo
Personalmente pienso que eso es matar moscas a cañonazos. Le estamos dando permisos de root a todo aquel que entre por samba al router y no creo que esto sea muy bueno.
Lo que yo hago es crear un usuario nuevo en el sistema, como por ejemplo "administrador" y le doy una contraseña. Posteriormente ese usuario "administrador" lo creo en samba y le pongo la misma contraseña. Con eso sólo dejamos los permisos necesarios de acceso a samba sin que nos puedan machacar el sistema por ser root. Lo único que hay que tener en cuenta es que hay que instalar el paquete para crear/modificar usuarios en el router (shadow-useradd / shadow-userdel), o como yo hago, modificar la compilación de busybox para que ya tenga los comandos adduser, deluser.Código: [Seleccionar]adduser -H administrador
Con esto nos crea el usuario administrador sin crear su directorio home. Le ponemos contraseña.Código: [Seleccionar]smbpasswd -a administrador
Agregamos ese usuario a samba y le ponemos la misma contraseña.
Ahora podemos compartir un directorio samba bajo ese usuario y siempre tendrá permisos para hacer lo que queramos, ya que el directorio es propio a ese usuario.
Si ese usuario y contraseña coinciden con el usuario/contraseña de windows, podremos acceder a las carpetas samba del router sin necesidad de poner usuario/contraseña ya que windows nos autentificará inmediatamente... ;D ;D ;D
option 'homes' '1'
Yo tuve problemas también con eso dado que samba busca entonces el directorio home para el usuario y termina fallando al no encontrarlo. Puede que esa también sea una de las razones por la que no puedes escribir.
Tampoco me parece buena idea tocar manualmente el fichero /etc/passwd. No he probado a hacerlo "manualmente" como dice jar, pero yo probaría a hacerlo con los comandos adduser y smbpasswd.
Por cierto, que si no creamos el directorio home para el usuario, no debemos ponerCódigo: [Seleccionar]option 'homes' '1'
Yo tuve problemas también con eso dado que samba busca entonces el directorio home para el usuario y termina fallando al no encontrarlo. Puede que esa también sea una de las razones por la que no puedes escribir.
Hola,
¿Saben si con el wifi broadcom se podrá hacer modo station, es decir, modo cliente y ap con el mismo wifi?
He visto y comprobado que con el Huawei HG556a ralink y atheros se puede actualmente.
Un saludo
Hola,
Estoy intentando compilar OpenWRT desde el repositorio oficial, y me funciona todo menos la wifi claro está.
¿Como puedo integrar los parches existentes del driver BCM43225 brcmsmac del repositorio de Noltari en el trunk oficial?
Estoy interesado en usar el repo oficial y no el de noltari porque no está actualizado, pero necesito la wifi.
Gracias!
Hola,Commit: https://github.com/openwrt-es/barrier-breaker-openwrt/commit/cb55ea9394c6774d79a01ca5056b50ffc8a129f4
Estoy intentando compilar OpenWRT desde el repositorio oficial, y me funciona todo menos la wifi claro está.
¿Como puedo integrar los parches existentes del driver BCM43225 brcmsmac del repositorio de Noltari en el trunk oficial?
Estoy interesado en usar el repo oficial y no el de noltari porque no está actualizado, pero necesito la wifi.
Gracias!
Hola a todos, un nuevo miembro por aqui.
Tengo un problemilla, compilo con el repositorio de Noltari pero no consigo hacer funcionar el puerto USB con cosas 1.1 (en específico una tarjeta de sonido para el shairport). Pen drives en modo usb2 con el modulo ohci quitado funciona perfectamente, pero en cuanto cargo el modulo ohci no me reconoce nada. ¿A alguien mas le pasa?
Hola a todos, un nuevo miembro por aqui.
Tengo un problemilla, compilo con el repositorio de Noltari pero no consigo hacer funcionar el puerto USB con cosas 1.1 (en específico una tarjeta de sonido para el shairport). Pen drives en modo usb2 con el modulo ohci quitado funciona perfectamente, pero en cuanto cargo el modulo ohci no me reconoce nada. ¿A alguien mas le pasa?
Creo que es un problema que ya se ha comentado en otro hilo: https://foro.seguridadwireless.net/openwrt/openwrt-en-comtrend-ar5387un/msg306584/#msg306584
De todas formas, Noltari, está actualizando el repositorio, así que en breve, estará solucionado ;)
https://foro.seguridadwireless.net/openwrt/(repositorio)-barrier-breaker-14-04/
Hola a todos, un nuevo miembro por aqui.
Tengo un problemilla, compilo con el repositorio de Noltari pero no consigo hacer funcionar el puerto USB con cosas 1.1 (en específico una tarjeta de sonido para el shairport). Pen drives en modo usb2 con el modulo ohci quitado funciona perfectamente, pero en cuanto cargo el modulo ohci no me reconoce nada. ¿A alguien mas le pasa?
Creo que es un problema que ya se ha comentado en otro hilo: https://foro.seguridadwireless.net/openwrt/openwrt-en-comtrend-ar5387un/msg306584/#msg306584
De todas formas, Noltari, está actualizando el repositorio, así que en breve, estará solucionado ;)
https://foro.seguridadwireless.net/openwrt/(repositorio)-barrier-breaker-14-04/
Buenas, estoy intentando bajar;
Firmware Openwrt
luci + kmod-brcmsmac + wpad-mini + kmod-usb-ohci + kmod-usb2 + kmod-usb-storage + kmod-fs-ext4 + kmod-ath9k-htc + kmod-brcmfmac + kmod-carl9170 + kmod-libertas-usb + kmod-net-zd1201 + kmod-p54-usb + kmod-rt2500-usb + kmod-rt2800-usb + kmod-rt73-usb + kmod-rtl8187 + kmod-rtl8192cu + kmod-zd1211rw
r38342
Pero dice que esta el link desactivado. Podria pasarme alguien un link para descargar la r38342 por favor?
Ha caído en mis manos un Home Station ADSL H108N fabricado por ZTE, de los que instalaba Vomistar.
Buscando si tenía soporte en OpenWrt, no he encontrado nada.
En google, en algunos sitios indican que es el mismo router que el Home Station ADB P.DG A4001N.
¿Sabéis algo sobre este router?¿Y si se puede instalar openwrt?
Saludos.
https://foro.seguridadwireless.net/openwrt/zxhn-zte-h108n-posible-desarrollo/
https://foro.seguridadwireless.net/openwrt/compilando-openwrt-para-zte-zxhn-h108n/
los enlaces del primer post no funcionan. podriais resubirlos por favor?
gracia
Si he visto uno, creo que tuyo, pero me gustaria probar los del primer post.los enlaces del primer post no funcionan. podriais resubirlos por favor?
gracia
A lo largo del hilo, tienes otros firmwares que si están disponibles para descargar.
Los del primer post, se recuperarán cuando sea posible ;)
Toma crack, te pego aquí una compilación que hice ayer desde el repo de noltari. lleva algunas cosas de mas como el vpnc pero va bienMuchas gracias amigo. Lo probaremos a ver que tal
https://mega.co.nz/#!bM4WBBJI!MtFk__N9sXJ9HS59B4orfm5N6-ADdBNTawBRL7trLRc
un abrazo
Toma crack, te pego aquí una compilación que hice ayer desde el repo de noltari. lleva algunas cosas de mas como el vpnc pero va bien
https://mega.co.nz/#!bM4WBBJI!MtFk__N9sXJ9HS59B4orfm5N6-ADdBNTawBRL7trLRc
un abrazo
Toma crack, te pego aquí una compilación que hice ayer desde el repo de noltari. lleva algunas cosas de mas como el vpnc pero va bien
https://mega.co.nz/#!bM4WBBJI!MtFk__N9sXJ9HS59B4orfm5N6-ADdBNTawBRL7trLRc
un abrazo
Toma crack, te pego aquí una compilación que hice ayer desde el repo de noltari. lleva algunas cosas de mas como el vpnc pero va bienHe instalado sta compilacion y solo me deja acceder por telnet. Le instlo luci a mano pero el wifi no funciona.
https://mega.co.nz/#!bM4WBBJI!MtFk__N9sXJ9HS59B4orfm5N6-ADdBNTawBRL7trLRc
un abrazo
Toma crack, te pego aquí una compilación que hice ayer desde el repo de noltari. lleva algunas cosas de mas como el vpnc pero va bienHe instalado sta compilacion y solo me deja acceder por telnet. Le instlo luci a mano pero el wifi no funciona.
https://mega.co.nz/#!bM4WBBJI!MtFk__N9sXJ9HS59B4orfm5N6-ADdBNTawBRL7trLRc
un abrazo
Con la Barrier Breaker 14.07 RC2 {Con LuCI} que hay en el primer post me pasa lo mismo
Lo único que no va es el opkg para añadir el soporte para la impresora ( kmod-usb-printer )
root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/snapshots/trunk/brcm63xx/packages/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Collected errors:
* opkg_download: Failed to download http://downloads.openwrt.org/snapshots/trunk/brcm63xx/packages/Packages.gz, wget returned 1.
sabéis hacia donde tiene que apuntar ahora?
Gracias
Hola compañeros a ver si me podeis echar una mano.Hola compañeros
Tengo una duda que no he logrado aclarar todavia sobre el modelo exacto de este router para poder instalar el firm OpenWRT correcto.
(He preguntado anteriormente en el hilo sobre el ADB P.DG A4001N de Arnet)
Me han pasado un router 'Home Station ADSL ADB P. DG A4001N' de Movistar España como este:
(http://www.subeimagenes.com/thumb/trasera-1106003.jpg) (http://www.subeimagenes.com/img/trasera-1106003.html) Subido en subir imagenes (http://www.subeimagenes.com)
El device info dice A4001N:
(http://www.subeimagenes.com/thumb/adb-4001n-1106004.jpg) (http://www.subeimagenes.com/img/adb-4001n-1106004.html) Subido en subir imagenes (http://www.subeimagenes.com)
La etiqueta de la parte de abajo dice A4001N:
(http://www.subeimagenes.com/thumb/etiqueta-1106008.jpg) (http://www.subeimagenes.com/img/etiqueta-1106008.html) Subido en subir imagenes (http://www.subeimagenes.com)
Tanto en el Device info como en la etiqueta inferior indican que es un A4001N sin el "1" al final.
En la pagina 20 de este hilo el compañero mazingerz80 comenta que tiene un modelo N y que le ha funcionado instalando los firmwares del N1 de este hilo. Pero al buscar entre los firmwares compilados por Noltari ( https://foro.seguridadwireless.net/openwrt/%28repositorio%29-barrier-breaker-14-07-rc3/ ) encuentro compilaciones para el N de unos 6 MB y otras compilaciones para el N1 de unos 8MB. Por lo que sigo con la duda...
¿Alguien sabe si este router en concreto corresponde a un A4001N o a un A4001N1??
Muchas gracias
Para entrar en modo "Falisafe" en este router hago lo siguiente.Muy buen aporte.
Configurar TCP/IP v4 a:
IP: 192.168.1.2
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Encender el router, se iluminará el led "Power", a los pocos segundos se apagará el led y volverá a encenderse, pasados unos segundos más el led "Power" comenzará a parpadear, en ese momento pulsar el boton "reset" del router (con una punta de un clip o similar) hasta que led "Power" comienze a parpadear muy rapidamente.
Ahora ejecutar Putty y entrar al router por telnet 192.168.1.1
(http://www.subeimagenes.com/thumb/puttyfailsafe-1121931.jpg) (http://www.subeimagenes.com/img/puttyfailsafe-1121931.html) Subido en subir imagenes (http://www.subeimagenes.com)
http://wiki.openwrt.org/doc/howto/generic.failsafe#in.failsafe.mode
un saludo
Gracias por el aporte zapple, pero sigo sin poder entrar a la interfaz.Hola chinales77
He puesto el router en modo prueba de fallos y entrado en telnet y he hecho lo siguiente
http://www.subeimagenes.com/img/captura-de-pantalla-de-2014-10-12-16-40-05-1122095.html
Que he hecho mal?
Salu2
find / | grep -i luci
Si contesta con una ristra de archivos de luci, entonces lo más probable es que LuCI todavia esté en el router y se pueda recuperar. Prueba ahora a arrancar y habilitar LuCI:/etc/init.d/uhttpd start
/etc/init.d/uhttpd enable
Despues de esto comprueba con el navegador si te deja entrar en interface web LuCIGracias a ti jar229... tus aportes si que nos han salvado en más de una ocasión.Para entrar en modo "Falisafe" en este router hago lo siguiente.Muy buen aporte.
Configurar TCP/IP v4 a:
IP: 192.168.1.2
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Encender el router, se iluminará el led "Power", a los pocos segundos se apagará el led y volverá a encenderse, pasados unos segundos más el led "Power" comenzará a parpadear, en ese momento pulsar el boton "reset" del router (con una punta de un clip o similar) hasta que led "Power" comienze a parpadear muy rapidamente.
Ahora ejecutar Putty y entrar al router por telnet 192.168.1.1
(http://www.subeimagenes.com/thumb/puttyfailsafe-1121931.jpg) (http://www.subeimagenes.com/img/puttyfailsafe-1121931.html) Subido en subir imagenes (http://www.subeimagenes.com)
http://wiki.openwrt.org/doc/howto/generic.failsafe#in.failsafe.mode
un saludo
Da gusto ver que de vez en cuando alguien postea para aportar cosas, y no solo para pedir ayuda.
Enviado desde uno de mis 'cacharros' usando Tapatalk
Pero instalé la version para el A4001N1 de Noltari BB-14.07-rc3 y todo ok.Bueno pues ya lo he solucionado, muchas gracias a el señor Zapple por todo su interés y sus aportes.
Post Noltari, donde dice: Compilaciones/Firmware compilados
https://foro.seguridadwireless.net/openwrt/%28repositorio%29-barrier-breaker-14-07-rc3/
Mediafire Noltari
https://www.mediafire.com/folder/8mqa4ksm088do/bb-14.07-rc3
/bb-14.07-rc3brcm63xx/generic_brcmsmac/openwrt-A4001N1-squashfs-cfe.bin (2014-08-13 14:06:22)
HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN
CFE version 1.0.37-106.24 for A4001N TEF 0002 BCM96328 (32bit,SP,BE)
Build Date: Wed Jan 26 12:59:25 CET 2011 (zu1costast@thorold)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name MX25L128, id 0xc218 size 16384KB
Total Flash size: 16384K with 4096 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 33554432 bytes (32MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-4) : 963281T_TEF
Number of MAC Addresses (1-32) : 11
Base MAC Address : xx:xx:xx:xx:xx:xx:xx
PSI Size (1-64) KBytes : 24
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
Voice Board Configuration (0-11) :
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from latest image (0xb8800000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x80010000
[ 0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3 (OpenWrt/L
inaro GCC 4.8-2014.04 r42625) ) #3 Wed Oct 1 15:07:11 CEST 2014
[ 0.000000] Detected Broadcom 0x6328 CPU revision b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V000
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jff
s2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 28656k/32768k available (2485k kernel code, 4112k reserve
d, 725k data, 308k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.288000] registering PCI controller with io_map_base unset
[ 0.304000] bio: create slab <bio-0> at 0
[ 0.312000] PCI host bridge to bus 0000:00
[ 0.316000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
[ 0.320000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.324000] pci_bus 0000:00: No busn resource found for root bus, will use [b
us 00-ff]
[ 0.328000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), rec
onfiguring
[ 0.332000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.336000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bi
t]
[ 0.340000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.344000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.348000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.352000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.368000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.376000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.380000] TCP: Hash tables configured (established 512 bind 512)
[ 0.388000] TCP: reno registered
[ 0.392000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.396000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.404000] NET: Registered protocol family 1
[ 0.412000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT
Y) (c) 2001-2006 Red Hat, Inc.
[ 0.428000] msgmni has been set to 55
[ 0.436000] io scheduler noop registered
[ 0.440000] io scheduler deadline registered (default)
[ 0.444000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_
uart
[ 0.452000] console [ttyS0] enabled, bootconsole disabled
[ 0.452000] console [ttyS0] enabled, bootconsole disabled
[ 0.472000] m25p80 spi1.0: found mx25l12805d, expected m25p80
[ 0.480000] m25p80 spi1.0: mx25l12805d (16384 Kbytes)
[ 0.484000] bcm63xxpart: CFE boot tag found with version 6 and board type 963
281T_TEF
[ 0.492000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.500000] bcm63xxpart: Partition 1 is rootfs offset 10100 and length 57b000
[ 0.508000] bcm63xxpart: Partition 2 is kernel offset 58b100 and length 105a0
f
[ 0.512000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.520000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.528000] bcm63xxpart: Spare partition is offset 6a0000 and length 950000
[ 0.536000] 5 bcm63xxpart partitions found on MTD device spi1.0
[ 0.540000] Creating 5 MTD partitions on "spi1.0":
[ 0.548000] 0x000000000000-0x000000010000 : "CFE"
[ 0.556000] 0x000000010100-0x00000058b100 : "rootfs"
[ 0.560000] mtd: partition "rootfs" must either start or end on erase block b
oundary or be smaller than an erase block -- forcing read-only
[ 0.576000] mtd: device 1 (rootfs) set to be root filesystem
[ 0.580000] mtdsplit: no squashfs found in "spi1.0"
[ 0.588000] 0x00000058b100-0x000000690b0f : "kernel"
[ 0.592000] mtd: partition "kernel" must either start or end on erase block b
oundary or be smaller than an erase block -- forcing read-only
[ 0.608000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.616000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.664000] b53_common: found switch: BCM63xx, rev 0
[ 0.672000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.684000] TCP: cubic registered
[ 0.688000] NET: Registered protocol family 17
[ 0.692000] Bridge firewalling registered
[ 0.696000] 8021q: 802.1Q VLAN Support v1.8
[ 0.708000] jffs2: Flash size not aligned to erasesize, reducing to 1024KiB
[ 0.716000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000000: 0x8001 instead
[ 0.724000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000004: 0x8001 instead
[ 0.736000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000008: 0x0010 instead
[ 0.744000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0000000c: 0x6d00 instead
[ 0.752000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000010: 0x0018 instead
[ 0.764000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0000001c: 0xfdff instead
[ 0.772000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000020: 0xb77f instead
[ 0.784000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000024: 0x0b37 instead
[ 0.792000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000028: 0x50c1 instead
[ 0.804000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0000002c: 0x44a5 instead
[ 0.812000] jffs2: Further such events for this erase block will not be print
ed
[ 0.852000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00010000: 0xded9 instead
[ 0.860000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00010004: 0x00ad instead
[ 0.872000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00010008: 0x6222 instead
[ 0.880000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0001000c: 0x275f instead
[ 0.892000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00010010: 0xcebb instead
[ 0.900000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00010014: 0xa0d7 instead
[ 0.912000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00010018: 0x75c5 instead
[ 0.920000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0001001c: 0x53eb instead
[ 0.932000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00010020: 0x500e instead
[ 0.940000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00010024: 0x3f71 instead
[ 0.948000] jffs2: Further such events for this erase block will not be print
ed
[ 0.988000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00020000: 0xdc1a instead
[ 1.000000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00020004: 0xf491 instead
[ 1.008000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00020008: 0x5be4 instead
[ 1.020000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0002000c: 0xe5be instead
[ 1.028000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00020010: 0x0f90 instead
[ 1.040000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00020014: 0x1a4f instead
[ 1.048000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00020018: 0xa1dd instead
[ 1.056000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0002001c: 0xdb5b instead
[ 1.068000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00020020: 0xc14b instead
[ 1.076000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00020024: 0xa11f instead
[ 1.088000] jffs2: Further such events for this erase block will not be print
ed
[ 1.128000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00030000: 0x7ed8 instead
[ 1.136000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00030004: 0x774b instead
[ 1.148000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00030008: 0x6375 instead
[ 1.156000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0003000c: 0xf5e7 instead
[ 1.168000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00030010: 0xf8c9 instead
[ 1.176000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00030014: 0x3abe instead
[ 1.184000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00030018: 0xc6a8 instead
[ 1.196000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0003001c: 0x270c instead
[ 1.204000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00030020: 0xf098 instead
[ 1.216000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00030024: 0x8c8e instead
[ 1.224000] jffs2: Further such events for this erase block will not be print
ed
[ 1.236000] jffs2: Old JFFS2 bitmask found at 0x00030dd0
[ 1.240000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[ 1.268000] jffs2: Old JFFS2 bitmask found at 0x0003a58c
[ 1.272000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[ 1.292000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00040000: 0xa775 instead
[ 1.300000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00040004: 0x1014 instead
[ 1.308000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00040008: 0x3049 instead
[ 1.320000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0004000c: 0xece7 instead
[ 1.328000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00040010: 0xefff instead
[ 1.340000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00040014: 0x978a instead
[ 1.348000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00040018: 0xf5f7 instead
[ 1.360000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0004001c: 0xd926 instead
[ 1.368000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00040020: 0x325c instead
[ 1.376000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00040024: 0x4a39 instead
[ 1.388000] jffs2: Further such events for this erase block will not be print
ed
[ 1.428000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00050000: 0x3f44 instead
[ 1.436000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00050004: 0x775b instead
[ 1.448000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00050008: 0x6cf5 instead
[ 1.456000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0005000c: 0x0469 instead
[ 1.468000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00050010: 0x996a instead
[ 1.476000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00050014: 0xc992 instead
[ 1.488000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00050018: 0xcabb instead
[ 1.496000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0005001c: 0xbe51 instead
[ 1.504000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00050020: 0x67b8 instead
[ 1.516000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00050024: 0xb890 instead
[ 1.524000] jffs2: Further such events for this erase block will not be print
ed
[ 1.564000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00060000: 0x5ec7 instead
[ 1.576000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00060004: 0xbef2 instead
[ 1.584000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00060008: 0xb7a4 instead
[ 1.596000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0006000c: 0xc1a5 instead
[ 1.604000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00060010: 0x01a8 instead
[ 1.612000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00060014: 0x2138 instead
[ 1.624000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00060018: 0x6649 instead
[ 1.632000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0006001c: 0x4db4 instead
[ 1.644000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00060020: 0xdda1 instead
[ 1.652000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00060024: 0x2afa instead
[ 1.664000] jffs2: Further such events for this erase block will not be print
ed
[ 1.704000] jffs2: Old JFFS2 bitmask found at 0x0006ff60
[ 1.708000] jffs2: You cannot use older JFFS2 filesystems with newer kernels
[ 1.716000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00070000: 0x165a instead
[ 1.724000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00070004: 0xb49f instead
[ 1.736000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00070008: 0x8566 instead
[ 1.744000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0007000c: 0x1c4a instead
[ 1.756000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00070010: 0xfa0b instead
[ 1.764000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00070014: 0x24e5 instead
[ 1.776000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00070018: 0x5870 instead
[ 1.784000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0007001c: 0x5685 instead
[ 1.792000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00070020: 0xc652 instead
[ 1.804000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00070024: 0xb24f instead
[ 1.812000] jffs2: Further such events for this erase block will not be print
ed
[ 1.852000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00080000: 0x3b6b instead
[ 1.864000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00080004: 0x0309 instead
[ 1.872000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00080008: 0xd512 instead
[ 1.884000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0008000c: 0xb3fb instead
[ 1.892000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00080010: 0x6446 instead
[ 1.900000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00080014: 0x6794 instead
[ 1.912000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00080018: 0x4812 instead
[ 1.920000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0008001c: 0x5b56 instead
[ 1.932000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00080020: 0xd35f instead
[ 1.940000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00080024: 0xb28e instead
[ 1.952000] jffs2: Further such events for this erase block will not be print
ed
[ 1.992000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00090000: 0x1e0f instead
[ 2.000000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00090004: 0xc94e instead
[ 2.012000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00090008: 0x021f instead
[ 2.020000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0009000c: 0xdc6c instead
[ 2.028000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00090010: 0x7dba instead
[ 2.040000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00090014: 0xe038 instead
[ 2.048000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00090018: 0x507b instead
[ 2.060000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0009001c: 0x9941 instead
[ 2.068000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00090020: 0x7f44 instead
[ 2.080000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00090024: 0x2645 instead
[ 2.088000] jffs2: Further such events for this erase block will not be print
ed
[ 2.128000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a0000: 0x6904 instead
[ 2.140000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a0004: 0x4a7b instead
[ 2.148000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a0008: 0xbf83 instead
[ 2.156000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a000c: 0x5d3a instead
[ 2.168000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a0010: 0xfc2c instead
[ 2.176000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a0014: 0x1b1d instead
[ 2.188000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a0018: 0x3598 instead
[ 2.196000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a001c: 0xafa6 instead
[ 2.208000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a0020: 0xe99c instead
[ 2.216000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000a0024: 0x583a instead
[ 2.228000] jffs2: Further such events for this erase block will not be print
ed
[ 2.264000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b0000: 0xa184 instead
[ 2.276000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b0004: 0x3234 instead
[ 2.284000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b0008: 0xbb5c instead
[ 2.296000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b000c: 0x97e7 instead
[ 2.304000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b0010: 0xb95d instead
[ 2.316000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b0014: 0x5b23 instead
[ 2.324000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b0018: 0xdc12 instead
[ 2.336000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b001c: 0x4127 instead
[ 2.344000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b0020: 0x2cf6 instead
[ 2.352000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000b0024: 0xf4ae instead
[ 2.364000] jffs2: Further such events for this erase block will not be print
ed
[ 2.404000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c0000: 0x1518 instead
[ 2.412000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c0004: 0x69c8 instead
[ 2.424000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c0008: 0xb205 instead
[ 2.432000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c000c: 0xec8e instead
[ 2.444000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c0010: 0xafe8 instead
[ 2.452000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c0014: 0x425f instead
[ 2.464000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c0018: 0xf659 instead
[ 2.472000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c001c: 0x0385 instead
[ 2.480000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c0020: 0xa086 instead
[ 2.492000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000c0024: 0x8324 instead
[ 2.500000] jffs2: Further such events for this erase block will not be print
ed
[ 2.540000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d0000: 0x0921 instead
[ 2.552000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d0004: 0x38c1 instead
[ 2.560000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d0008: 0xbdc2 instead
[ 2.572000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d000c: 0xc354 instead
[ 2.580000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d0010: 0x4e06 instead
[ 2.588000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d0014: 0xbab7 instead
[ 2.600000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d0018: 0x8123 instead
[ 2.608000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d001c: 0xb125 instead
[ 2.620000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d0020: 0x1805 instead
[ 2.628000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000d0024: 0x62f7 instead
[ 2.640000] jffs2: Further such events for this erase block will not be print
ed
[ 2.680000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e0000: 0x44ed instead
[ 2.688000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e0004: 0x319a instead
[ 2.700000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e0008: 0x9a11 instead
[ 2.708000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e000c: 0xae66 instead
[ 2.716000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e0010: 0x7836 instead
[ 2.728000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e0014: 0x3409 instead
[ 2.736000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e0018: 0x4503 instead
[ 2.748000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e001c: 0x7785 instead
[ 2.756000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e0020: 0x3764 instead
[ 2.768000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000e0024: 0xad5f instead
[ 2.776000] jffs2: Further such events for this erase block will not be print
ed
[ 2.816000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f0000: 0xf205 instead
[ 2.824000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f0004: 0xf891 instead
[ 2.836000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f0008: 0xab40 instead
[ 2.844000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f000c: 0xbc05 instead
[ 2.856000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f0010: 0xc016 instead
[ 2.864000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f0014: 0x10cd instead
[ 2.876000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f0018: 0x5737 instead
[ 2.884000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f001c: 0x8dbb instead
[ 2.896000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f0020: 0x27e9 instead
[ 2.904000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x000f0024: 0x17c8 instead
[ 2.912000] jffs2: Further such events for this erase block will not be print
ed
[ 2.952000] jffs2: Cowardly refusing to erase blocks on filesystem with no va
lid JFFS2 nodes
[ 2.960000] jffs2: empty_blocks 0, bad_blocks 0, c->nr_blocks 16
[ 2.968000] VFS: Cannot open root device "mtdblock2" or unknown-block(31,2):
error -5
[ 2.976000] Please append a correct "root=" boot option; here are the availab
le partitions:
[ 2.984000] 1f00 64 mtdblock0 (driver?)
[ 2.992000] 1f01 5612 mtdblock1 (driver?)
[ 2.996000] 1f02 1046 mtdblock2 (driver?)
[ 3.000000] 1f03 64 mtdblock3 (driver?)
[ 3.004000] 1f04 16256 mtdblock4 (driver?)
[ 3.012000] Kernel panic - not syncing: VFS: Unable to mount root fs on unkno
wn-block(31,2)
Hola, pongo un poco en antecedentes, le cargué a un A4001N la compilación que hay en el repositrio Barrier Breaker 14.07 para el A4001N. quedó el router bloquedado en el arranque y sin respuesta para acceder ni a prueba de fallos.
He soldado los 3 postes a la placa para poder conectar el puerto serie, leo el arranque pero no actua el pulsar una tecla para entrar al CFE y sigue arrancado hasta que se bloquea, creo que si no logro interrumpir el arranque para que entre en el CFE no tengo nada que hacer, ¿estoy en lo cierto?, aqui pego el arranque:
vi /etc/config/network
opkg update
Luego instalaremos LuCI sin HTTPS:opkg install luci
y entonces iniciamos y ponerlo al inicio/etc/init.d/uhttpd enable
/etc/init.d/uhttpd start
se puede poner trasmision a este router y descargar en un disco duro conectado en el usb de este router?Hola, esto a mi también me interesa.
se puede poner trasmision a este router y descargar en un disco duro conectado en el usb de este router?Hola, esto a mi también me interesa.
Meto el pendrive en el USB del router, y ahora como hago para entrar a los datos del USB desde el pc o el móvil?
Salu2 y gracias
he instalado este firm del primer mensaje y no tiene luci, es normal?
http://downloads.openwrt.org/barrier_breaker/14.07-rc2/brcm63xx/generic/openwrt-A4001N1-squashfs-cfe.bin
ping hace sin problema
:D buenas.
yo he compilado siguiendo el tutorial de este enlace https://foro.seguridadwireless.net/openwrt/compilar-openwrt-a-nuestro-gusto/msg253589/#msg253589
Unicamente he cambiado lo siguiente, logicamente para adaptarlo a nuestro router. <Target System> broadcom BCM63xx, <Target Profile> BCM6328, y te selecciona automaticamente A4001N.
>:( me ha conectado con otro router por wifi, pero al intentar crear otra red wifi para que sirva como repetidor ^-^ ^-^ se pierde la conexion.
Estoy de pruebas pero si os interesa esta compilacion con LUCI en español os la puedo facilitar.
Una nota para jar229 >:( >:( >:( >:( por soportarme. probare si puedo ayudar en este post y en el de como compilar si alguien me hecha una mano pues >:(
>:( me ha conectado con otro router por wifi, pero al intentar crear otra red wifi para que sirva como repetidor ^-^ ^-^ se pierde la conexion.
>:( me ha conectado con otro router por wifi, pero al intentar crear otra red wifi para que sirva como repetidor ^-^ ^-^ se pierde la conexion.
No vas a conseguir ponerlo en modo repetidor con sólo una wifi. La wifi es Broadcom y no lo soporta. Para hacer de repetidor necesitas otro pincho wifi en el USB para repetir la señal.
>:( me ha conectado con otro router por wifi, pero al intentar crear otra red wifi para que sirva como repetidor ^-^ ^-^ se pierde la conexion.
No vas a conseguir ponerlo en modo repetidor con sólo una wifi. La wifi es Broadcom y no lo soporta. Para hacer de repetidor necesitas otro pincho wifi en el USB para repetir la señal.
Esto es seguro?.
Con el router que daba telefonica antes que este, el Amper ASL-26555, si lo he conseguido.
El ADB tiene Wifi Broadcom: http://wiki.openwrt.org/toh/adb/p.dg_a4001n1 (http://wiki.openwrt.org/toh/adb/p.dg_a4001n1)
El Amper tiene Wifi Ralink: http://wiki.openwrt.org/toh/alpha/asl26555 (http://wiki.openwrt.org/toh/alpha/asl26555)
SI, es seguro... Aparte de que son blancos y aplastados, no tienen nada en común por dentro... ^-^
El ADB tiene Wifi Broadcom: http://wiki.openwrt.org/toh/adb/p.dg_a4001n1 (http://wiki.openwrt.org/toh/adb/p.dg_a4001n1)
El Amper tiene Wifi Ralink: http://wiki.openwrt.org/toh/alpha/asl26555 (http://wiki.openwrt.org/toh/alpha/asl26555)
SI, es seguro... Aparte de que son blancos y aplastados, no tienen nada en común por dentro... ^-^
Re: WDS con 2 Home Station ADB P.DG A4001N
el 19-09-2012 15:33
Buenas tardes Castillo92:
Persona de nuestro laboratorio de Tecnología ha realizado pruebas en el laboratorio conectando dos BHS de ADB mediante este procedimiento.
Para ello han configurado en los dos routers una misma SSID, mismo canal y misma seguridad de la WLAN. El primer router mantiene su dirección LAN 192.168.1.1 y el DHCP habilitado, mientras que al otro router le asignamos la dirección LAN 192.168.1.2 y le deshabilitamos el DHCP (El primer router le asignará dirección).
Segun estos lo han conseguido en modo WDS, pienso entonces se podria conseguir sin tener que toquetear el router emisor ??? ???
saludos
Varias cosillas importantes:
Puerto serie: 115200 8N1 sin control de flujo. Hay que hacer un par de puentes e instalar algunos jumpers si queremos conectar y desconectar.
(http://1.bp.blogspot.com/-x6CpuaCR_Wg/T8naCat5b4I/AAAAAAAAEZ8/aG4FJlI3H8k/s1600/IMG_20120602_100505-1.jpg)
Copia de seguridad
Buenas tardes.
Hago los puentes, pongo los jumper y ¿donde esta el puerto serie?.
este router no trae ningun puerto serie ¿O SI?
Foto del roter https://www.dropbox.com/s/chqznzqagpuzayc/A4001N.jpg?dl=0
por lo menos el mio es asi.
Varias cosillas importantes:
Puerto serie: 115200 8N1 sin control de flujo. Hay que hacer un par de puentes e instalar algunos jumpers si queremos conectar y desconectar.
(http://1.bp.blogspot.com/-x6CpuaCR_Wg/T8naCat5b4I/AAAAAAAAEZ8/aG4FJlI3H8k/s1600/IMG_20120602_100505-1.jpg)
Copia de seguridad
Buenas tardes.
Hago los puentes, pongo los jumper y ¿donde esta el puerto serie?.
este router no trae ningun puerto serie ¿O SI?
Foto del roter https://www.dropbox.com/s/chqznzqagpuzayc/A4001N.jpg?dl=0
por lo menos el mio es asi.
Varias cosillas importantes:
Puerto serie: 115200 8N1 sin control de flujo. Hay que hacer un par de puentes e instalar algunos jumpers si queremos conectar y desconectar.
(http://1.bp.blogspot.com/-x6CpuaCR_Wg/T8naCat5b4I/AAAAAAAAEZ8/aG4FJlI3H8k/s1600/IMG_20120602_100505-1.jpg)
Copia de seguridad
Buenas tardes.
Hago los puentes, pongo los jumper y ¿donde esta el puerto serie?.
este router no trae ningun puerto serie ¿O SI?
Foto del roter https://www.dropbox.com/s/chqznzqagpuzayc/A4001N.jpg?dl=0
por lo menos el mio es asi.
El puerto serie son los 6 pines que están justo al lado de los puentes marcados en rojo. La configuración es la que está en el cuadro blanco.
A esos pines tienes que conectar un conversor USB/TTL serie para poder ver lo que sale por el puerto serie.
Donde puedo comprar unos jumpers para conectar los pines?
Gracias.
Hola a todos, les cuento. resulta que me instale el openwrt en este router y la instalación fue todo bien de echo lo tengo funcionando, lo que pasa que no vale para adsl y quisiera volver al firmware original. Aunque mire en la pagina de openwrt y en el post que hace referencia a este router en este foro no logro entender como hacerlo. ¿Alguien seria tan amable de explicar los pasos a dar para volver al firmware de fabrica? explicación para catetos ya que yo en este mundo soy nulo, Gracias.Hola amigo. Muy facil.
Solo comentar, que se puede volver al firmware original actualizando desde LuCi (usando la imagen del primer mensaje) ;)o sea... System/Backup-Flashfirmware: Flash image
Hola, a ver si me podeis ayudar con un problemilla por favor.
Instale una version sin luci y ahora no soy capaz de cambiarla(tengo el router muerto como 3 meses ya y a ratos intento a ver si doy con la tecla pero me es imposible), puedo entrar por telnet al router y modificar el archivo /etc/config/network pero es k no soy capaz ni se por donde tocarle para poder conectarlo y bajar los paquetes necesarios para poder ponerle luci
Una ayuda please..me tiene desesperado ya el cacharro este y no se si sere capaz de instalar luci, por mas que leo me parece super dificil y me parece todo chino :'( :'(
PD: el tema de las soldaduras no se me da demasiado mal y si me explicais como hacer para poder subirle un firm con luci directamente al estilo de los comtrend tmb me podria valer, pero viendo esas fotos no soy capaz de saber que tengo que puentear ni nada, soy un inepto total, perdon por dar la brasa.. :(
uci set network.lan.ipaddr=192.168.1.254
uci set network.lan.netmask=255.255.255.0
uci set network.lan.gateway=192.168.1.1
uci set network.lan.dns='8.8.8.8 192.168.1.1'
uci commit network
adicionalmente puedes necestiar deshabilitar el dhcp de OpenWrt/etc/init.d/dnsmasq disable
opkg update
opkg install luci
Barrier Breaker 14.07 RC2 {Con LuCI}Aunque luego he visto que no podia acceder a Luci
BusyBox v1.22.1 (2014-07-22 04:28:56 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (14.07-rc2, r41815)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
BusyBox v1.22.1 (2014-08-13 14:25:28 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Barrier Breaker, r42068)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
como no conozco la password para entrar con scp, se la cambio con passwd.
Dejo el firmware en /tmp (facil usando la version grafica de winscp) y luego hago el upgrade de firm:
sysupgrade -v /tmp/openwrt-A4001N1-squashfs-cfe.bin
Cuando acaba ya puedo entrar por ssh y por web, pues luci esta operativa:
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): Configuration file: /var/run/hostapd-phy0.conf
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): ACS: Automatic channel selection started, this may take a bit
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): wlan0: interface state COUNTRY_UPDATE->ACS
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): wlan0: ACS-STARTED
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): ACS: Unable to collect survey data
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): ACS: All study options have failed
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): Interface initialization failed
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): wlan0: interface state ACS->DISABLED
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): wlan0: AP-DISABLED
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): ACS: Possibly channel configuration is invalid, please report this along with your config file.
Tue Oct 27 22:23:05 2015 daemon.notice netifd: radio0 (2247): ACS: Failed to start
Gracias por el aporte,solo 2 cuestiones, lo estoy utilizando como neutro.he notado que la velocidad de conexión por WiFi baja¿alguna recomendación?,¿algun Tuto para montar un disco por el puerto USB y saber como acceder a él en el menú del router?
block-mount
kmod-usb2
kmod-usb-storage
kmod-fs-ext4
kmod-fs-ntfs
kmod-fs-vfat
kmod-nls-cp1250
kmod-nls-cp437
kmod-nls-cp850
kmod-nls-cp852
kmod-nls-iso8859-1
kmod-nls-iso8859-15
Buenas, estoy intentando usar este router para ver movistar tv por wifi. He seguido los pasos que dan aqui abrazalaweb.net/2018/01/conectar-decodificador-tv-movistar-por-wifi/.
Todo bien, me entra a los menus,a las pelis, a los canales pero no cargan. No se si sera porque de los 50 megas que tengo contratados solo llegan 20 al router openwrt.Con la conexion por cable va perfectamente asi que el router esta bien configurado o eso creo.
E intentado con kmod-bcma y se pierde la conexion. Con wl y nas y baja la velocidad a 6 megas.
Mis preguntas son:
1. Se puede hacer algo para que le llegen mas megas?
2.si no se pudiera, algun router de movistar que soporte 802.11n ya que este no encuentro la forma de hacerlo. O el router de fibra de orange el arcadyan prv3399 b b lt, e buscado pero no encuentro nada.
3.Si ninguna de las dos opciones fuera posible, que me recomendais seria solo para enchufar el deco de movistar y ver la tele.www.amazon.es/gp/aw/d/B01MQO3F0F/ref=mp_s_a_1_1?__mk_es_ES=ÅMÅZÕÑ&qid=1520353339&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=5+ghz+wifi&psc=1 esto me serviria?.
Muchas gracias