¡hola
que ha insertado el disco para dsmeg
El disco y el formato ntfs
firmware r37180
tratando con el comando lsusb me sale este error
unable to initialize libusb: -99
si usted me puede dar una mano estoy agradecido.
Esa compilación no tienes los paquetes necesarios para que te funcione el disco.
Instala esta y nos cuentas ... https://foro.seguridadwireless.net/openwrt/openwrt-en-routers-de-telefonica-home-station-alpha-asl26555-y-adb-p-dg-a4001n1/msg279042/#msg279042
He instalado lo que dije, pero la versión no r35763 lugar el registro del kernel
[ 0.000000] Linux version 3.7.9 (jar@jar-virtual-machine) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Thu Mar 14 18:10:45 CET 2013
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: 1.0.37-106.17
[ 0.000000] No bcm_tag found!
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 96328avng
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802d9d60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Memory: 28912k/32768k available (2336k kernel code, 3856k reserved, 603k data, 260k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.036000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.292000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [
0x00000000 flags 0x0]
[ 0.308000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.312000] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
[ 0.312000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.312000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.316000] pci 0000:01:00.0: [14e4:a8d8] type 00 class 0x028000
[ 0.316000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.316000] pci 0000:01:00.0: supports D1 D2
[ 0.316000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.316000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.316000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.320000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.324000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.328000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.332000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.336000] Switching to clocksource MIPS
[ 0.344000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.352000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.360000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.368000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.376000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.384000] bcma: bus0: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.384000] bcma: bus0: SPROM offset 0x800
[ 0.424000] bcma: bus0: invalid sprom read from the PCIe card, try to use fallback sprom
[ 0.432000] bcm63xx_sprom_bcma: filled sprom for chip id 0xa8d9
[ 0.440000] bcma: bus0: Using SPROM revision 8 provided by platform.
[ 0.440000] bcma: bus0: PMU resource config unknown or not needed for device 0xA8D9
[ 0.440000] bcma: bus0: Workarounds unknown or not needed for device 0xA8D9
[ 0.452000] bcma: bus0: GPIO driver not activated
[ 0.452000] bcma: bus0: Bus registered
[ 0.456000] NET: Registered protocol family 2
[ 0.460000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.468000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.480000] TCP: reno registered
[ 0.484000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.496000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.504000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.516000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.532000] msgmni has been set to 56
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.548000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.556000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.580000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.600000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 10ff00
[ 0.608000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ed0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 5f0004 and length 9ffffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.648000] 0x000000000000-0x000000010000 : "CFE"
[ 0.656000] 0x000000010100-0x000000120000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000120000-0x000000ff0000 : "rootfs"
[ 0.684000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=5F0000, len=A00000
[ 0.700000] 0x0000005f0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.768000] b53_common: found switch: BCM63xx, rev 0
[ 0.776000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.780000] Registered led device: 96328avng::internet-fail
[ 0.784000] Registered led device: 96328avng::dsl
[ 0.784000] Registered led device: 96328avng::power
[ 0.784000] Registered led device: 96328avng::power-fail
[ 0.784000] Registered led device: 96328avng::wps
[ 0.784000] Registered led device: 96328avng::internet
[ 0.788000] TCP: cubic registered
[ 0.788000] NET: Registered protocol family 17
[ 0.796000] 8021q: 802.1Q VLAN Support v1.8
[ 0.808000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.820000] Freeing unused kernel memory: 260k freed
[ 3.928000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 11.232000] Compat-drivers backport release: compat-drivers-2013-01-21-1
[ 11.240000] Backport based on wireless-testing.git master-2013-02-22
[ 11.244000] compat.git: wireless-testing.git
[ 11.308000] cfg80211: Calling CRDA to update world regulatory domain
[ 11.312000] cfg80211: World regulatory domain updated:
[ 11.320000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.328000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.336000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.344000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.352000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.360000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.240000] SCSI subsystem initialized
[ 12.508000] usbcore: registered new interface driver usbfs
[ 12.512000] usbcore: registered new interface driver hub
[ 12.520000] usbcore: registered new device driver usb
[ 13.832000] usbcore: registered new interface driver rt73usb
[ 13.872000] usbcore: registered new interface driver rtl8187
[ 13.908000] usbcore: registered new interface driver rt2800usb
[ 13.960000] Button Hotplug driver version 0.4.1
[ 15.516000] PPP generic driver version 2.4.2
[ 15.972000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 16.328000] bcma: bus0: Switched to core: 0x812
[ 16.332000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.532000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.880000] NET: Registered protocol family 24
[ 17.244000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.436000] nf_conntrack version 0.5.0 (455 buckets, 1820 max)
[ 18.088000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 18.272000] uhci_hcd: USB Universal Host Controller Interface driver
[ 18.412000] usbcore: registered new interface driver ath9k_htc
[ 18.576000] usbcore: registered new interface driver usblp
[ 18.768000] Initializing USB Mass Storage driver...
[ 18.772000] usbcore: registered new interface driver usb-storage
[ 18.780000] USB Mass Storage support registered.
[ 18.952000] usbcore: registered new interface driver ums-alauda
[ 18.984000] usbcore: registered new interface driver ums-cypress
[ 19.016000] usbcore: registered new interface driver ums-datafab
[ 19.044000] usbcore: registered new interface driver ums-freecom
[ 19.076000] usbcore: registered new interface driver ums-isd200
[ 19.108000] usbcore: registered new interface driver ums-jumpshot
[ 19.136000] usbcore: registered new interface driver ums-karma
[ 19.168000] usbcore: registered new interface driver ums-sddr09
[ 19.200000] usbcore: registered new interface driver ums-sddr55
[ 19.232000] usbcore: registered new interface driver ums-usbat
[ 19.276000] usbcore: registered new interface driver zd1211rw
[ 19.496000] fuse init (API version 7.20)
[ 25.216000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 26.824000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 26.832000] device eth0.1 entered promiscuous mode
[ 26.836000] device eth0 entered promiscuous mode
[ 26.848000] br-lan: port 1(eth0.1) entered forwarding state
[ 26.852000] br-lan: port 1(eth0.1) entered forwarding state
[ 28.856000] br-lan: port 1(eth0.1) entered forwarding state
[ 51.236000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 51.252000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 51.256000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 117.976000] jffs2: notice: (1024) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 190.736000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 190.748000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 192.232000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 192.240000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 193.692000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 193.700000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 198.984000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 198.992000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 209.464000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 209.472000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 221.912000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 221.920000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 225.640000] wlan0: authenticate with 00:18:84:1f:94:61
[ 225.648000] wlan0: direct probe to 00:18:84:1f:94:61 (try 1/3)
[ 225.652000] wlan0: direct probe to 00:18:84:1f:94:61 (try 2/3)
[ 225.660000] wlan0: send auth to 00:18:84:1f:94:61 (try 3/3)
[ 225.668000] wlan0: authenticated
[ 225.688000] brcmsmac bcma0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 225.692000] brcmsmac bcma0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 225.700000] brcmsmac bcma0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 225.716000] wlan0: associate with 00:18:84:1f:94:61 (try 1/3)
[ 225.732000] wlan0: RX AssocResp from 00:18:84:1f:94:61 (capab=0x411 status=0 aid=1)
[ 225.740000] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 225.748000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 225.756000] wlan0: associated
[ 281.196000] br-lan: port 1(eth0.1) entered disabled state
[ 281.216000] device eth0.1 left promiscuous mode
[ 281.220000] device eth0 left promiscuous mode
[ 281.224000] br-lan: port 1(eth0.1) entered disabled state
[ 281.264000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 281.280000] device eth0.1 entered promiscuous mode
[ 281.284000] device eth0 entered promiscuous mode
[ 281.300000] br-lan: port 1(eth0.1) entered forwarding state
[ 281.304000] br-lan: port 1(eth0.1) entered forwarding state
[ 282.112000] wlan0: deauthenticating from 00:18:84:1f:94:61 by local choice (reason=3)
[ 282.128000] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 282.136000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 283.308000] br-lan: port 1(eth0.1) entered forwarding state
[ 283.636000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 283.644000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 287.608000] wlan0: authenticate with 00:18:84:1f:94:61
[ 287.612000] wlan0: send auth to 00:18:84:1f:94:61 (try 1/3)
[ 287.648000] wlan0: authenticated
[ 287.656000] brcmsmac bcma0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 287.660000] brcmsmac bcma0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 287.668000] brcmsmac bcma0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 287.684000] wlan0: associate with 00:18:84:1f:94:61 (try 1/3)
[ 287.700000] wlan0: RX AssocResp from 00:18:84:1f:94:61 (capab=0x411 status=0 aid=1)
[ 287.708000] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 287.716000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 287.724000] wlan0: associated
[ 468.272000] bcm63xx_enetsw bcm63xx_enetsw.0: link DOWN on Port 4
[ 470.276000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex