Autor Tema: [Desarrollo] OpenWrt en Telefónica Home Station ADB P.DG A4001N1 (Leído 390543 veces)

jar229 · « **Respuesta #100 en:** 30-06-2012, 18:10 (Sábado) »

Cita de: sERASEr en 30-06-2012, 18:02 (Sábado)

Enhorabuena a todos, en especial a Noltari, gracias por vuestro trabajo.

Cita de: Noltari en 30-06-2012, 18:00 (Sábado)

¿Es el último firmware que he colgado no?

A ver si puedo hablar tranquilamente con jogo y me comenta como solucionar de la forma más apropiada posible para que acepten el parche lo de la fallback SPROM.

Me alegro de que funcione, os aseguro que me ha llevado su tiempo conseguirlo ^^.

Saludos!

Sí es el último firm

No hace falta que asegures nada, cualquiera que lea el hilo, puede ver perfectamente el trabajo que has hecho

Y gmtti también

Noltari · « **Respuesta #101 en:** 30-06-2012, 18:13 (Sábado) »

Cita de: sERASEr en 30-06-2012, 18:02 (Sábado)

Enhorabuena a todos, en especial a Noltari, gracias por vuestro trabajo.

Gracias

.

Las modificaciones las he hecho pensando en posibles placas nuevas que estén en la misma situación, por lo que partiendo de la base de mis parches es realmente sencillo adaptarlo.
Además, con el programa que he mencionado antes (https://github.com/Noltari/SPROM_Map) es realmente sencillo sacar las fallback sprom desde los archivos proporcionados por el GPL de Broadcom.

Todos los cambios al SVN:
https://dl.dropbox.com/u/4708147/openwrt/63281T/63281T_TEF-svn.patch

Parches del WLAN enviados:
https://lists.openwrt.org/pipermail/openwrt-devel/2012-June/015875.html
https://lists.openwrt.org/pipermail/openwrt-devel/2012-June/015876.html

Saludos!

Noltari · « **Respuesta #102 en:** 30-06-2012, 19:00 (Sábado) »

Con respecto al USB y al Wifi N, me temo que es cuestión de configuraciones del firmware (no controlo muy bien las del Wifi N xDDDD).

Prueba este firmware:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcmsmac_usb.bin

Aviso: puede que el Wifi no funcione si brcmsmac no tiene definido el 43225 (WLAN de este router).

Saludos.

gmtii · « **Respuesta #103 en:** 30-06-2012, 20:09 (Sábado) »

wifi N funcionando! ... el brcmsmac si que soporta el 43225... bueno nos queda el USB.

bootlog

[spoiler][ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Jun 30 18:55:39 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [

0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.156000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.164000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.404000] roboswitch: Probing device eth0:
[ 3.408000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.416000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.424000] roboswitch: Probing device eth1: No such device
[ 3.428000] roboswitch: Probing device eth2: No such device
[ 3.432000] roboswitch: Probing device eth3: No such device
[ 12.040000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.048000] Backport based on wireless-testing.git master-2012-06-14
[ 12.056000] compat.git: wireless-testing.git
[ 12.116000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.120000] cfg80211: World regulatory domain updated:
[ 12.128000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.136000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.144000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.152000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.160000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.168000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.560000] NET: Registered protocol family 10
[ 12.976000] SCSI subsystem initialized
[ 13.024000] There is already a switch registered on the device 'eth0'
[ 13.032000] roboswitch: Probing device eth1: No such device
[ 13.036000] roboswitch: Probing device eth2: No such device
[ 13.044000] roboswitch: Probing device eth3: No such device
[ 13.320000] usbcore: registered new interface driver usbfs
[ 13.324000] usbcore: registered new interface driver hub
[ 13.332000] usbcore: registered new device driver usb
[ 13.844000] Button Hotplug driver version 0.4.1
[ 14.012000] PPP generic driver version 2.4.2
[ 14.452000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.804000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.812000] ieee80211 phy0: wl0: brcms_c_attach_stf_ant_init: Invalid antennas available in srom (0x0), using 3
[ 14.824000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.968000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.440000] NET: Registered protocol family 24
[ 15.748000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.792000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.688000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.996000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.040000] Initializing USB Mass Storage driver...
[ 17.048000] usbcore: registered new interface driver usb-storage
[ 17.052000] USB Mass Storage support registered.
[ 17.216000] usbcore: registered new interface driver ums-alauda
[ 17.248000] usbcore: registered new interface driver ums-cypress
[ 17.276000] usbcore: registered new interface driver ums-datafab
[ 17.308000] usbcore: registered new interface driver ums-freecom
[ 17.336000] usbcore: registered new interface driver ums-isd200
[ 17.364000] usbcore: registered new interface driver ums-jumpshot
[ 17.392000] usbcore: registered new interface driver ums-karma
[ 17.424000] usbcore: registered new interface driver ums-sddr09
[ 17.452000] usbcore: registered new interface driver ums-sddr55
[ 17.624000] usbcore: registered new interface driver ums-usbat
[ 17.656000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 22.760000] device eth0 entered promiscuous mode
[ 22.768000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 22.776000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 22.788000] br-lan: port 1(eth0) entered forwarding state
[ 22.792000] br-lan: port 1(eth0) entered forwarding state
[ 24.796000] br-lan: port 1(eth0) entered forwarding state
[ 33.368000] eth0: no IPv6 routers present
[ 37.984000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 38.000000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 38.004000] jffs2_build_filesystem(): erasing all blocks after the end marker... dummy
[/spoiler]

Cita de: Noltari en 30-06-2012, 19:00 (Sábado)

Con respecto al USB y al Wifi N, me temo que es cuestión de configuraciones del firmware (no controlo muy bien las del Wifi N xDDDD).

Prueba este firmware:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcmsmac_usb.bin

Aviso: puede que el Wifi no funcione si brcmsmac no tiene definido el 43225 (WLAN de este router).

Saludos.

Noltari · « **Respuesta #104 en:** 30-06-2012, 20:14 (Sábado) »

Cita de: gmtii en 30-06-2012, 20:09 (Sábado)

wifi N funcionando! ... el brcmsmac si que soporta el 43225... bueno nos queda el USB.

bootlog

[spoiler][ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Jun 30 18:55:39 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [ 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.156000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.164000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.404000] roboswitch: Probing device eth0:
[ 3.408000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.416000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.424000] roboswitch: Probing device eth1: No such device
[ 3.428000] roboswitch: Probing device eth2: No such device
[ 3.432000] roboswitch: Probing device eth3: No such device
[ 12.040000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.048000] Backport based on wireless-testing.git master-2012-06-14
[ 12.056000] compat.git: wireless-testing.git
[ 12.116000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.120000] cfg80211: World regulatory domain updated:
[ 12.128000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.136000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.144000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.152000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.160000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.168000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.560000] NET: Registered protocol family 10
[ 12.976000] SCSI subsystem initialized
[ 13.024000] There is already a switch registered on the device 'eth0'
[ 13.032000] roboswitch: Probing device eth1: No such device
[ 13.036000] roboswitch: Probing device eth2: No such device
[ 13.044000] roboswitch: Probing device eth3: No such device
[ 13.320000] usbcore: registered new interface driver usbfs
[ 13.324000] usbcore: registered new interface driver hub
[ 13.332000] usbcore: registered new device driver usb
[ 13.844000] Button Hotplug driver version 0.4.1
[ 14.012000] PPP generic driver version 2.4.2
[ 14.452000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.804000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.812000] ieee80211 phy0: wl0: brcms_c_attach_stf_ant_init: Invalid antennas available in srom (0x0), using 3
[ 14.824000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.968000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.440000] NET: Registered protocol family 24
[ 15.748000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.792000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.688000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.996000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.040000] Initializing USB Mass Storage driver...
[ 17.048000] usbcore: registered new interface driver usb-storage
[ 17.052000] USB Mass Storage support registered.
[ 17.216000] usbcore: registered new interface driver ums-alauda
[ 17.248000] usbcore: registered new interface driver ums-cypress
[ 17.276000] usbcore: registered new interface driver ums-datafab
[ 17.308000] usbcore: registered new interface driver ums-freecom
[ 17.336000] usbcore: registered new interface driver ums-isd200
[ 17.364000] usbcore: registered new interface driver ums-jumpshot
[ 17.392000] usbcore: registered new interface driver ums-karma
[ 17.424000] usbcore: registered new interface driver ums-sddr09
[ 17.452000] usbcore: registered new interface driver ums-sddr55
[ 17.624000] usbcore: registered new interface driver ums-usbat
[ 17.656000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 22.760000] device eth0 entered promiscuous mode
[ 22.768000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 22.776000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 22.788000] br-lan: port 1(eth0) entered forwarding state
[ 22.792000] br-lan: port 1(eth0) entered forwarding state
[ 24.796000] br-lan: port 1(eth0) entered forwarding state
[ 33.368000] eth0: no IPv6 routers present
[ 37.984000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 38.000000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 38.004000] jffs2_build_filesystem(): erasing all blocks after the end marker... dummy
[/spoiler]

Cita de: Noltari en 30-06-2012, 19:00 (Sábado)
Con respecto al USB y al Wifi N, me temo que es cuestión de configuraciones del firmware (no controlo muy bien las del Wifi N xDDDD).

Prueba este firmware:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcmsmac_usb.bin

Aviso: puede que el Wifi no funcione si brcmsmac no tiene definido el 43225 (WLAN de este router).

Saludos.

No, SSB es para dispositivos con PCI. Para los dispositivos con PCIe se utiliza BCMA.

Le preguntaré a KanjiMonster para que arroje algo de luz, porque yo la verdad ni idea :$...

Edito: Me he dado cuenta de que no hay soporte para USB por BCMA en linux 3.3.
De hecho, para BRCM47XX hay un parche que lo habilita específicamente:
https://dev.openwrt.org/browser/trunk/target/linux/brcm47xx/patches-3.3/183-USB-Add-driver-for-the-bcma-bus.patch
Este parche ya ha sido incorporado en las versiones más recientes de Linux, por lo que no veo la necesidad de molestarnos intentando adaptarlo para la versión actual ya que no creo que tarden mucho en actualizar openwrt a la última versión de Linux.

Saludos.

jar229 · « **Respuesta #105 en:** 01-07-2012, 01:03 (Domingo) »

Ya también he instalado la última versión y comprobado que el wifi 'n' funciona.
Eso sí, el rendimiento por wifi, es muchísimo menor al que consigo con el hg556a (atheros).
No se si será el driver ....

Noltari · « **Respuesta #106 en:** 02-07-2012, 23:44 (Lunes) »

Cita de: jar229 en 01-07-2012, 01:03 (Domingo)

Ya también he instalado la última versión y comprobado que el wifi 'n' funciona.
Eso sí, el rendimiento por wifi, es muchísimo menor al que consigo con el hg556a (atheros).
No se si será el driver ....

He actualizado el programita, incorporando más parámetros y he actualizado los parches:
https://dl.dropbox.com/u/4708147/openwrt/63281T/63281T_TEF_svn.patch

Firmware compilado: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches2.bin

Contadme si funciona y si es más estable

.

Saludos!

jar229 · « **Respuesta #107 en:** 03-07-2012, 00:22 (Martes) »

Mañana, en cuanto pueda, lo pruebo

Enviado desde mi u8500 usando Tapatalk 2

Noltari · « **Respuesta #108 en:** 03-07-2012, 03:41 (Martes) »

Cita de: jar229 en 03-07-2012, 00:22 (Martes)

Mañana, en cuanto pueda, lo pruebo

Enviado desde mi u8500 usando Tapatalk 2

Utiliza este firmware mejor:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches3.bin

Incorpora el backpot de Hauke del BCMA/SSB.

jar229 · « **Respuesta #109 en:** 03-07-2012, 17:11 (Martes) »

Cita de: Noltari en 03-07-2012, 03:41 (Martes)

Utiliza este firmware mejor:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches3.bin

Incorpora el backpot de Hauke del BCMA/SSB.

Con este firmware, el wifi no funciona de forma correcta.
Aparece en LuCi, pero no permite activarlo ni hacer un scan.

dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 3 03:37:26 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [

0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.492000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.660000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 2.800000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.020000] roboswitch: Probing device eth0:
[ 3.024000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.032000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.040000] roboswitch: Probing device eth1: No such device
[ 3.048000] roboswitch: Probing device eth2: No such device
[ 3.052000] roboswitch: Probing device eth3: No such device
[ 9.088000] JFFS2 notice: (342) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (1 unchecked, 19 orphan) and 153 of xref (0 dead, 148 orphan) found.
[ 12.596000] NET: Registered protocol family 10
[ 12.660000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.672000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 14.208000] wl: module license 'unspecified' taints kernel.
[ 14.212000] Disabling lock debugging due to kernel taint
[ 14.320000] SSB/BCMA glue driver successfully attached
[ 14.348000] Button Hotplug driver version 0.4.1
[ 14.396000] PPP generic driver version 2.4.2
[ 14.624000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.824000] NET: Registered protocol family 24
[ 14.856000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 15.224000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.508000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.052000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.064000] device eth0 entered promiscuous mode
[ 19.072000] br-lan: port 1(eth0) entered forwarding state
[ 19.076000] br-lan: port 1(eth0) entered forwarding state
[ 21.080000] br-lan: port 1(eth0) entered forwarding state
[ 29.496000] eth0: no IPv6 routers present
[/spoiler]

Cita de: Noltari en 02-07-2012, 23:44 (Lunes)

He actualizado el programita, incorporando más parámetros y he actualizado los parches:
https://dl.dropbox.com/u/4708147/openwrt/63281T/63281T_TEF_svn.patch

Firmware compilado: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches2.bin

Contadme si funciona y si es más estable .

Saludos!

Probado, el wifi funciona, pero me ha dejado sin ethernet ¿?
Por suerte, cuando actualizé, lo tenía configurado como cliente wifi (usando relayd), así que puedo acceder a él.
Quizás debería restaurar openwrt a los valores por defecto pero ... no me convence ... no tengo claro que me quede sin conexión al router ... así que probablemente le meta un firmware de los que funcionaban, vía wifi.
El dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Jul 2 23:35:47 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [

0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.392000] roboswitch: Probing device eth0:
[ 3.396000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.404000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.412000] roboswitch: Probing device eth1: No such device
[ 3.416000] roboswitch: Probing device eth2: No such device
[ 3.424000] roboswitch: Probing device eth3: No such device
[ 9.440000] JFFS2 notice: (345) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (0 unchecked, 19 orphan) and 24 of xref (0 dead, 19 orphan) found.
[ 12.264000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.272000] Backport based on wireless-testing.git master-2012-06-14
[ 12.280000] compat.git: wireless-testing.git
[ 12.340000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.344000] cfg80211: World regulatory domain updated:
[ 12.352000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.360000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.368000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.376000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.384000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.392000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.788000] NET: Registered protocol family 10
[ 13.212000] SCSI subsystem initialized
[ 13.264000] There is already a switch registered on the device 'eth0'
[ 13.272000] roboswitch: Probing device eth1: No such device
[ 13.276000] roboswitch: Probing device eth2: No such device
[ 13.280000] roboswitch: Probing device eth3: No such device
[ 13.560000] usbcore: registered new interface driver usbfs
[ 13.568000] usbcore: registered new interface driver hub
[ 13.576000] usbcore: registered new device driver usb
[ 14.100000] Button Hotplug driver version 0.4.1
[ 14.268000] PPP generic driver version 2.4.2
[ 14.700000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 15.052000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 15.064000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.208000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.680000] NET: Registered protocol family 24
[ 15.988000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.032000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.928000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.236000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.284000] Initializing USB Mass Storage driver...
[ 17.288000] usbcore: registered new interface driver usb-storage
[ 17.296000] USB Mass Storage support registered.
[ 17.460000] usbcore: registered new interface driver ums-alauda
[ 17.488000] usbcore: registered new interface driver ums-cypress
[ 17.520000] usbcore: registered new interface driver ums-datafab
[ 17.548000] usbcore: registered new interface driver ums-freecom
[ 17.576000] usbcore: registered new interface driver ums-isd200
[ 17.608000] usbcore: registered new interface driver ums-jumpshot
[ 17.636000] usbcore: registered new interface driver ums-karma
[ 17.664000] usbcore: registered new interface driver ums-sddr09
[ 17.696000] usbcore: registered new interface driver ums-sddr55
[ 17.868000] usbcore: registered new interface driver ums-usbat
[ 17.896000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 21.720000] device eth0 entered promiscuous mode
[ 21.728000] br-lan: port 1(eth0) entered forwarding state
[ 21.732000] br-lan: port 1(eth0) entered forwarding state
[ 23.736000] br-lan: port 1(eth0) entered forwarding state
[ 23.864000] dummy
[ 23.868000] dummy
[ 23.868000] dummy
[ 23.872000] dummy
[ 23.872000] dummy
[ 23.876000] dummy
[ 23.880000] dummy
[ 23.880000] dummy
[ 23.884000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 23.892000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 23.948000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.248000] dummy
[ 27.252000] dummy
[ 27.252000] dummy
[ 27.256000] dummy
[ 27.256000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 27.264000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 27.276000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 27.284000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.952000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 32.480000] eth0: no IPv6 routers present
[ 38.064000] wlan0: no IPv6 routers present

[/spoiler]

Noltari · « **Respuesta #110 en:** 03-07-2012, 17:17 (Martes) »

Cita de: jar229 en 03-07-2012, 17:11 (Martes)

Cita de: Noltari en 03-07-2012, 03:41 (Martes)
Utiliza este firmware mejor:
https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches3.bin

Incorpora el backpot de Hauke del BCMA/SSB.

Con este firmware, el wifi no funciona de forma correcta.
Aparece en LuCi, pero no permite activarlo ni hacer un scan.

dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 3 03:37:26 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [ 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.492000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.660000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 2.800000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.020000] roboswitch: Probing device eth0:
[ 3.024000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.032000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.040000] roboswitch: Probing device eth1: No such device
[ 3.048000] roboswitch: Probing device eth2: No such device
[ 3.052000] roboswitch: Probing device eth3: No such device
[ 9.088000] JFFS2 notice: (342) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (1 unchecked, 19 orphan) and 153 of xref (0 dead, 148 orphan) found.
[ 12.596000] NET: Registered protocol family 10
[ 12.660000] There is already a switch registered on the device 'eth0'
[ 12.668000] roboswitch: Probing device eth1: No such device
[ 12.672000] roboswitch: Probing device eth2: No such device
[ 12.680000] roboswitch: Probing device eth3: No such device
[ 14.208000] wl: module license 'unspecified' taints kernel.
[ 14.212000] Disabling lock debugging due to kernel taint
[ 14.320000] SSB/BCMA glue driver successfully attached
[ 14.348000] Button Hotplug driver version 0.4.1
[ 14.396000] PPP generic driver version 2.4.2
[ 14.624000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.824000] NET: Registered protocol family 24
[ 14.856000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 15.224000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.508000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.052000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.064000] device eth0 entered promiscuous mode
[ 19.072000] br-lan: port 1(eth0) entered forwarding state
[ 19.076000] br-lan: port 1(eth0) entered forwarding state
[ 21.080000] br-lan: port 1(eth0) entered forwarding state
[ 29.496000] eth0: no IPv6 routers present
[/spoiler]

Cita de: Noltari en 02-07-2012, 23:44 (Lunes)
He actualizado el programita, incorporando más parámetros y he actualizado los parches:
https://dl.dropbox.com/u/4708147/openwrt/63281T/63281T_TEF_svn.patch

Firmware compilado: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_patches2.bin

Contadme si funciona y si es más estable .

Saludos!

Probado, el wifi funciona, pero me ha dejado sin ethernet ¿?
Por suerte, cuando actualizé, lo tenía configurado como cliente wifi (usando relayd), así que puedo acceder a él.
Quizás debería restaurar openwrt a los valores por defecto pero ... no me convence ... no tengo claro que me quede sin conexión al router ... así que probablemente le meta un firmware de los que funcionaban, vía wifi.
El dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Jul 2 23:35:47 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [ 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.392000] roboswitch: Probing device eth0:
[ 3.396000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.404000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.412000] roboswitch: Probing device eth1: No such device
[ 3.416000] roboswitch: Probing device eth2: No such device
[ 3.424000] roboswitch: Probing device eth3: No such device
[ 9.440000] JFFS2 notice: (345) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (0 unchecked, 19 orphan) and 24 of xref (0 dead, 19 orphan) found.
[ 12.264000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.272000] Backport based on wireless-testing.git master-2012-06-14
[ 12.280000] compat.git: wireless-testing.git
[ 12.340000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.344000] cfg80211: World regulatory domain updated:
[ 12.352000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.360000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.368000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.376000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.384000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.392000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.788000] NET: Registered protocol family 10
[ 13.212000] SCSI subsystem initialized
[ 13.264000] There is already a switch registered on the device 'eth0'
[ 13.272000] roboswitch: Probing device eth1: No such device
[ 13.276000] roboswitch: Probing device eth2: No such device
[ 13.280000] roboswitch: Probing device eth3: No such device
[ 13.560000] usbcore: registered new interface driver usbfs
[ 13.568000] usbcore: registered new interface driver hub
[ 13.576000] usbcore: registered new device driver usb
[ 14.100000] Button Hotplug driver version 0.4.1
[ 14.268000] PPP generic driver version 2.4.2
[ 14.700000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 15.052000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 15.064000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.208000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.680000] NET: Registered protocol family 24
[ 15.988000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.032000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.928000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.236000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.284000] Initializing USB Mass Storage driver...
[ 17.288000] usbcore: registered new interface driver usb-storage
[ 17.296000] USB Mass Storage support registered.
[ 17.460000] usbcore: registered new interface driver ums-alauda
[ 17.488000] usbcore: registered new interface driver ums-cypress
[ 17.520000] usbcore: registered new interface driver ums-datafab
[ 17.548000] usbcore: registered new interface driver ums-freecom
[ 17.576000] usbcore: registered new interface driver ums-isd200
[ 17.608000] usbcore: registered new interface driver ums-jumpshot
[ 17.636000] usbcore: registered new interface driver ums-karma
[ 17.664000] usbcore: registered new interface driver ums-sddr09
[ 17.696000] usbcore: registered new interface driver ums-sddr55
[ 17.868000] usbcore: registered new interface driver ums-usbat
[ 17.896000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 21.720000] device eth0 entered promiscuous mode
[ 21.728000] br-lan: port 1(eth0) entered forwarding state
[ 21.732000] br-lan: port 1(eth0) entered forwarding state
[ 23.736000] br-lan: port 1(eth0) entered forwarding state
[ 23.864000] dummy
[ 23.868000] dummy
[ 23.868000] dummy
[ 23.872000] dummy
[ 23.872000] dummy
[ 23.876000] dummy
[ 23.880000] dummy
[ 23.880000] dummy
[ 23.884000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 23.892000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 23.948000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.248000] dummy
[ 27.252000] dummy
[ 27.252000] dummy
[ 27.256000] dummy
[ 27.256000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 27.264000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 27.276000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 27.284000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.952000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 32.480000] eth0: no IPv6 routers present
[ 38.064000] wlan0: no IPv6 routers present

[/spoiler]

Las pruebas deberías hacerlas partiendo de una configuración nueva, dejando que el firmware borre la configuración. Sobre todo porque he cambiado el driver de brcsmac a wl y no llevan la misma configuración. En cuanto a lo del ethernet puede ser por el mismo motivo :$...

jar229 · « **Respuesta #111 en:** 03-07-2012, 21:23 (Martes) »

Probados ambos firmwares, borrando la configuración.

En este: openwrt-963281T_TEF-generic-squashfs-cfe_final_patches3.bin, sigue sin funcionar el wifi.
Eso sí, ya no aparece tampoco en LuCi (tenías razón, había quedado algún 'rastro' por ahí).

El dmseg:

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 3 03:37:26 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [

0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.492000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.660000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 3.028000] roboswitch: Probing device eth0:
[ 3.032000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.040000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.048000] roboswitch: Probing device eth1: No such device
[ 3.052000] roboswitch: Probing device eth2: No such device
[ 3.060000] roboswitch: Probing device eth3: No such device
[ 11.740000] NET: Registered protocol family 10
[ 11.804000] There is already a switch registered on the device 'eth0'
[ 11.812000] roboswitch: Probing device eth1: No such device
[ 11.816000] roboswitch: Probing device eth2: No such device
[ 11.820000] roboswitch: Probing device eth3: No such device
[ 13.324000] wl: module license 'unspecified' taints kernel.
[ 13.332000] Disabling lock debugging due to kernel taint
[ 13.440000] SSB/BCMA glue driver successfully attached
[ 13.468000] Button Hotplug driver version 0.4.1
[ 13.516000] PPP generic driver version 2.4.2
[ 13.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.936000] NET: Registered protocol family 24
[ 13.968000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.336000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.612000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.400000] device eth0 entered promiscuous mode
[ 19.408000] br-lan: port 1(eth0) entered forwarding state
[ 19.412000] br-lan: port 1(eth0) entered forwarding state
[ 21.416000] br-lan: port 1(eth0) entered forwarding state
[ 29.760000] eth0: no IPv6 routers present
[ 36.576000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.592000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.596000] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 129.396000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 129.436000] done.
[ 129.440000] JFFS2 notice: (975) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

[/spoiler]

Con este sí, funciona el wifi, me da la impresión de que la velocidad de transferencia, ha mejorado un poco, pero por el contrario, he perdido la conexión (vía wifi) un par de veces. Tendré que probarlo más a fondo.

El dmseg:

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Jul 2 23:35:47 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [

0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.164000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.400000] roboswitch: Probing device eth0:
[ 3.404000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.412000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.420000] roboswitch: Probing device eth1: No such device
[ 3.424000] roboswitch: Probing device eth2: No such device
[ 3.432000] roboswitch: Probing device eth3: No such device
[ 12.036000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.044000] Backport based on wireless-testing.git master-2012-06-14
[ 12.052000] compat.git: wireless-testing.git
[ 12.112000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.116000] cfg80211: World regulatory domain updated:
[ 12.124000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.132000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.140000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.148000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.156000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.164000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.552000] NET: Registered protocol family 10
[ 12.972000] SCSI subsystem initialized
[ 13.020000] There is already a switch registered on the device 'eth0'
[ 13.028000] roboswitch: Probing device eth1: No such device
[ 13.032000] roboswitch: Probing device eth2: No such device
[ 13.040000] roboswitch: Probing device eth3: No such device
[ 13.312000] usbcore: registered new interface driver usbfs
[ 13.320000] usbcore: registered new interface driver hub
[ 13.328000] usbcore: registered new device driver usb
[ 13.840000] Button Hotplug driver version 0.4.1
[ 14.004000] PPP generic driver version 2.4.2
[ 14.448000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.800000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.808000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.952000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.424000] NET: Registered protocol family 24
[ 15.736000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.776000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.676000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.984000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.032000] Initializing USB Mass Storage driver...
[ 17.036000] usbcore: registered new interface driver usb-storage
[ 17.044000] USB Mass Storage support registered.
[ 17.208000] usbcore: registered new interface driver ums-alauda
[ 17.236000] usbcore: registered new interface driver ums-cypress
[ 17.268000] usbcore: registered new interface driver ums-datafab
[ 17.296000] usbcore: registered new interface driver ums-freecom
[ 17.324000] usbcore: registered new interface driver ums-isd200
[ 17.356000] usbcore: registered new interface driver ums-jumpshot
[ 17.384000] usbcore: registered new interface driver ums-karma
[ 17.412000] usbcore: registered new interface driver ums-sddr09
[ 17.444000] usbcore: registered new interface driver ums-sddr55
[ 17.616000] usbcore: registered new interface driver ums-usbat
[ 17.644000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 22.780000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 22.788000] device eth0 entered promiscuous mode
[ 22.796000] br-lan: port 1(eth0) entered forwarding state
[ 22.800000] br-lan: port 1(eth0) entered forwarding state
[ 24.804000] br-lan: port 1(eth0) entered forwarding state
[ 33.376000] eth0: no IPv6 routers present
[ 42.968000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 42.984000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 42.988000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 139.168000] JFFS2 notice: (1053) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 152.724000] dummy
[ 152.728000] dummy
[ 152.728000] dummy
[ 152.732000] dummy
[ 152.732000] dummy
[ 152.736000] dummy
[ 152.736000] dummy
[ 152.740000] dummy
[ 152.740000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 152.748000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 152.844000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 154.524000] dummy
[ 154.524000] dummy
[ 154.528000] dummy
[ 154.528000] dummy
[ 154.532000] dummy
[ 154.532000] dummy
[ 154.536000] dummy
[ 154.540000] dummy
[ 154.540000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 154.548000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 154.596000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 156.276000] dummy
[ 156.276000] dummy
[ 156.280000] dummy
[ 156.280000] dummy
[ 156.284000] dummy
[ 156.284000] dummy
[ 156.288000] dummy
[ 156.288000] dummy
[ 156.292000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 156.300000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 156.356000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 168.216000] dummy
[ 168.216000] dummy
[ 168.220000] dummy
[ 168.220000] dummy
[ 168.224000] dummy
[ 168.224000] dummy
[ 168.228000] dummy
[ 168.232000] dummy
[ 168.232000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 168.240000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 168.288000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 196.984000] dummy
[ 196.984000] dummy
[ 196.988000] dummy
[ 196.988000] dummy
[ 196.992000] dummy
[ 196.992000] dummy
[ 196.996000] dummy
[ 196.996000] dummy
[ 197.000000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 197.008000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 197.044000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 225.400000] dummy
[ 225.404000] dummy
[ 225.404000] dummy
[ 225.408000] dummy
[ 225.408000] dummy
[ 225.412000] dummy
[ 225.412000] dummy
[ 225.416000] dummy
[ 225.416000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 225.424000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 225.476000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 230.296000] dummy
[ 230.300000] dummy
[ 230.304000] dummy
[ 230.304000] dummy
[ 230.308000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 230.316000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 230.324000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 230.336000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 233.640000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)

[/spoiler]

Noltari · « **Respuesta #112 en:** 03-07-2012, 23:16 (Martes) »

Cita de: jar229 en 03-07-2012, 21:23 (Martes)

Probados ambos firmwares, borrando la configuración.

En este: openwrt-963281T_TEF-generic-squashfs-cfe_final_patches3.bin, sigue sin funcionar el wifi.
Eso sí, ya no aparece tampoco en LuCi (tenías razón, había quedado algún 'rastro' por ahí).

El dmseg:

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Jul 3 03:37:26 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [ 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.492000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.660000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 3.028000] roboswitch: Probing device eth0:
[ 3.032000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.040000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.048000] roboswitch: Probing device eth1: No such device
[ 3.052000] roboswitch: Probing device eth2: No such device
[ 3.060000] roboswitch: Probing device eth3: No such device
[ 11.740000] NET: Registered protocol family 10
[ 11.804000] There is already a switch registered on the device 'eth0'
[ 11.812000] roboswitch: Probing device eth1: No such device
[ 11.816000] roboswitch: Probing device eth2: No such device
[ 11.820000] roboswitch: Probing device eth3: No such device
[ 13.324000] wl: module license 'unspecified' taints kernel.
[ 13.332000] Disabling lock debugging due to kernel taint
[ 13.440000] SSB/BCMA glue driver successfully attached
[ 13.468000] Button Hotplug driver version 0.4.1
[ 13.516000] PPP generic driver version 2.4.2
[ 13.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.936000] NET: Registered protocol family 24
[ 13.968000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.336000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.612000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.400000] device eth0 entered promiscuous mode
[ 19.408000] br-lan: port 1(eth0) entered forwarding state
[ 19.412000] br-lan: port 1(eth0) entered forwarding state
[ 21.416000] br-lan: port 1(eth0) entered forwarding state
[ 29.760000] eth0: no IPv6 routers present
[ 36.576000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.592000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.596000] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 129.396000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 129.436000] done.
[ 129.440000] JFFS2 notice: (975) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

[/spoiler]

Con este sí, funciona el wifi, me da la impresión de que la velocidad de transferencia, ha mejorado un poco, pero por el contrario, he perdido la conexión (vía wifi) un par de veces. Tendré que probarlo más a fondo.

El dmseg:

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Jul 2 23:35:47 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a3a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2241k kernel code, 3384k reserved, 398k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [ 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 310004 and length cdfffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=CE0000
[ 0.700000] 0x000000310000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 3.164000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 3.400000] roboswitch: Probing device eth0:
[ 3.404000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.412000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.420000] roboswitch: Probing device eth1: No such device
[ 3.424000] roboswitch: Probing device eth2: No such device
[ 3.432000] roboswitch: Probing device eth3: No such device
[ 12.036000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.044000] Backport based on wireless-testing.git master-2012-06-14
[ 12.052000] compat.git: wireless-testing.git
[ 12.112000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.116000] cfg80211: World regulatory domain updated:
[ 12.124000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.132000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.140000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.148000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.156000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.164000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.552000] NET: Registered protocol family 10
[ 12.972000] SCSI subsystem initialized
[ 13.020000] There is already a switch registered on the device 'eth0'
[ 13.028000] roboswitch: Probing device eth1: No such device
[ 13.032000] roboswitch: Probing device eth2: No such device
[ 13.040000] roboswitch: Probing device eth3: No such device
[ 13.312000] usbcore: registered new interface driver usbfs
[ 13.320000] usbcore: registered new interface driver hub
[ 13.328000] usbcore: registered new device driver usb
[ 13.840000] Button Hotplug driver version 0.4.1
[ 14.004000] PPP generic driver version 2.4.2
[ 14.448000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.800000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.808000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.952000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.424000] NET: Registered protocol family 24
[ 15.736000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.776000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 16.676000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.984000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.032000] Initializing USB Mass Storage driver...
[ 17.036000] usbcore: registered new interface driver usb-storage
[ 17.044000] USB Mass Storage support registered.
[ 17.208000] usbcore: registered new interface driver ums-alauda
[ 17.236000] usbcore: registered new interface driver ums-cypress
[ 17.268000] usbcore: registered new interface driver ums-datafab
[ 17.296000] usbcore: registered new interface driver ums-freecom
[ 17.324000] usbcore: registered new interface driver ums-isd200
[ 17.356000] usbcore: registered new interface driver ums-jumpshot
[ 17.384000] usbcore: registered new interface driver ums-karma
[ 17.412000] usbcore: registered new interface driver ums-sddr09
[ 17.444000] usbcore: registered new interface driver ums-sddr55
[ 17.616000] usbcore: registered new interface driver ums-usbat
[ 17.644000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 22.780000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 22.788000] device eth0 entered promiscuous mode
[ 22.796000] br-lan: port 1(eth0) entered forwarding state
[ 22.800000] br-lan: port 1(eth0) entered forwarding state
[ 24.804000] br-lan: port 1(eth0) entered forwarding state
[ 33.376000] eth0: no IPv6 routers present
[ 42.968000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 42.984000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 42.988000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 139.168000] JFFS2 notice: (1053) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 152.724000] dummy
[ 152.728000] dummy
[ 152.728000] dummy
[ 152.732000] dummy
[ 152.732000] dummy
[ 152.736000] dummy
[ 152.736000] dummy
[ 152.740000] dummy
[ 152.740000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 152.748000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 152.844000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 154.524000] dummy
[ 154.524000] dummy
[ 154.528000] dummy
[ 154.528000] dummy
[ 154.532000] dummy
[ 154.532000] dummy
[ 154.536000] dummy
[ 154.540000] dummy
[ 154.540000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 154.548000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 154.596000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 156.276000] dummy
[ 156.276000] dummy
[ 156.280000] dummy
[ 156.280000] dummy
[ 156.284000] dummy
[ 156.284000] dummy
[ 156.288000] dummy
[ 156.288000] dummy
[ 156.292000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 156.300000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 156.356000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 168.216000] dummy
[ 168.216000] dummy
[ 168.220000] dummy
[ 168.220000] dummy
[ 168.224000] dummy
[ 168.224000] dummy
[ 168.228000] dummy
[ 168.232000] dummy
[ 168.232000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 168.240000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 168.288000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 196.984000] dummy
[ 196.984000] dummy
[ 196.988000] dummy
[ 196.988000] dummy
[ 196.992000] dummy
[ 196.992000] dummy
[ 196.996000] dummy
[ 196.996000] dummy
[ 197.000000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 197.008000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 197.044000] ADDRCONF(NETDEV_UP): tmp.radio0: link is not ready
[ 225.400000] dummy
[ 225.404000] dummy
[ 225.404000] dummy
[ 225.408000] dummy
[ 225.408000] dummy
[ 225.412000] dummy
[ 225.412000] dummy
[ 225.416000] dummy
[ 225.416000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 225.424000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 225.476000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 230.296000] dummy
[ 230.300000] dummy
[ 230.304000] dummy
[ 230.304000] dummy
[ 230.308000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 230.316000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 230.324000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 230.336000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 233.640000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)

[/spoiler]

No sé qué narices me ha pasado al compilar el firmware que el driver del wifi no se ha instalado -.-...

Firmware compilado de nuevo: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_wl.bin

Saludos!

jar229 · « **Respuesta #113 en:** 04-07-2012, 10:47 (Miércoles) »

Cita de: Noltari en 03-07-2012, 23:16 (Martes)

No sé qué narices me ha pasado al compilar el firmware que el driver del wifi no se ha instalado -.-...

Firmware compilado de nuevo: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_final_wl.bin

Saludos!

Probado.
Sigue sin aparece el wifi por ningún lado

dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Tue Jul 3 22:51:58 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [

0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.404000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.488000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.664000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 2.800000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.020000] roboswitch: Probing device eth0:
[ 3.024000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.032000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.040000] roboswitch: Probing device eth1: No such device
[ 3.044000] roboswitch: Probing device eth2: No such device
[ 3.052000] roboswitch: Probing device eth3: No such device
[ 11.728000] NET: Registered protocol family 10
[ 11.792000] There is already a switch registered on the device 'eth0'
[ 11.800000] roboswitch: Probing device eth1: No such device
[ 11.804000] roboswitch: Probing device eth2: No such device
[ 11.812000] roboswitch: Probing device eth3: No such device
[ 13.328000] wl: module license 'unspecified' taints kernel.
[ 13.332000] Disabling lock debugging due to kernel taint
[ 13.440000] SSB/BCMA glue driver successfully attached
[ 13.468000] Button Hotplug driver version 0.4.1
[ 13.516000] PPP generic driver version 2.4.2
[ 13.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.940000] NET: Registered protocol family 24
[ 13.976000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.344000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.624000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.316000] device eth0 entered promiscuous mode
[ 19.320000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.332000] br-lan: port 1(eth0) entered forwarding state
[ 19.336000] br-lan: port 1(eth0) entered forwarding state
[ 21.340000] br-lan: port 1(eth0) entered forwarding state
[ 29.360000] eth0: no IPv6 routers present
[ 36.612000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.628000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.632000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 128.760000] JFFS2 notice: (975) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

[/spoiler]

Noltari · « **Respuesta #114 en:** 04-07-2012, 13:34 (Miércoles) »

Cita de: jar229 en 04-07-2012, 10:47 (Miércoles)

Probado.
Sigue sin aparece el wifi por ningún lado

dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Tue Jul 3 22:51:58 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a39f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29384k/32768k available (2240k kernel code, 3384k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [ 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] NET: Registered protocol family 2
[ 0.344000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.352000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.356000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.364000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.372000] TCP reno registered
[ 0.372000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.392000] PCI: CLS 0 bytes, default 16
[ 0.396000] audit: initializing netlink socket (disabled)
[ 0.400000] type=2000 audit(0.400:1): initialized
[ 0.404000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.412000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.424000] msgmni has been set to 57
[ 0.428000] io scheduler noop registered
[ 0.432000] io scheduler deadline registered (default)
[ 0.440000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.448000] console [ttyS0] enabled, bootconsole disabled
[ 0.464000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.468000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.476000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.484000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.488000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.496000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.504000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.512000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.520000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.528000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.532000] Creating 5 MTD partitions on "spi0.0":
[ 0.536000] 0x000000000000-0x000000010000 : "CFE"
[ 0.544000] 0x000000010100-0x000000100000 : "kernel"
[ 0.552000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.564000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.572000] mtd: partition "rootfs" set to be root filesystem
[ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.588000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.596000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.604000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.648000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.656000] Registered led device: 963281T_TEF:green:power
[ 0.656000] Registered led device: 963281T_TEF:red:stop
[ 0.656000] Registered led device: 963281T_TEF:green:inet
[ 0.656000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.660000] Registered led device: 963281T_TEF:green:ppp
[ 0.660000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.660000] Registered led device: 963281T_TEF:green:3g
[ 0.660000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.660000] Registered led device: 963281T_TEF:green:wlan
[ 0.660000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.660000] Registered led device: 963281T_TEF:green:eth
[ 0.664000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.664000] TCP cubic registered
[ 0.668000] NET: Registered protocol family 17
[ 0.672000] 8021q: 802.1Q VLAN Support v1.8
[ 0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.696000] Freeing unused kernel memory: 200k freed
[ 2.800000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.020000] roboswitch: Probing device eth0:
[ 3.024000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.032000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.040000] roboswitch: Probing device eth1: No such device
[ 3.044000] roboswitch: Probing device eth2: No such device
[ 3.052000] roboswitch: Probing device eth3: No such device
[ 11.728000] NET: Registered protocol family 10
[ 11.792000] There is already a switch registered on the device 'eth0'
[ 11.800000] roboswitch: Probing device eth1: No such device
[ 11.804000] roboswitch: Probing device eth2: No such device
[ 11.812000] roboswitch: Probing device eth3: No such device
[ 13.328000] wl: module license 'unspecified' taints kernel.
[ 13.332000] Disabling lock debugging due to kernel taint
[ 13.440000] SSB/BCMA glue driver successfully attached
[ 13.468000] Button Hotplug driver version 0.4.1
[ 13.516000] PPP generic driver version 2.4.2
[ 13.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.940000] NET: Registered protocol family 24
[ 13.976000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.344000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.624000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.316000] device eth0 entered promiscuous mode
[ 19.320000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.332000] br-lan: port 1(eth0) entered forwarding state
[ 19.336000] br-lan: port 1(eth0) entered forwarding state
[ 21.340000] br-lan: port 1(eth0) entered forwarding state
[ 29.360000] eth0: no IPv6 routers present
[ 36.612000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.628000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.632000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 128.760000] JFFS2 notice: (975) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

[/spoiler]

En concreto sigue sin aparecer ningún rastro de BCMA por ningún lado. Esto me lleva a pensar que después del backport de Hauke del BCMA/SSB tengo que añadir nuevos parámetros a la configuración de linux para que funcione.

Por eso he editado la configuración basada en la existente para BCM47xx y ~~estoy generando un firmware nuevo~~ que sí que debería funcionar. Lo siento por todas estas pruebas inútiles que os hayan hecho perder el tiempo :$...

EDIT: Firmware -> https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_wl_bcma_parms.bin

Saludos.

jar229 · « **Respuesta #115 en:** 04-07-2012, 14:39 (Miércoles) »

Cita de: Noltari en 04-07-2012, 13:34 (Miércoles)

En concreto sigue sin aparecer ningún rastro de BCMA por ningún lado. Esto me lleva a pensar que después del backport de Hauke del BCMA/SSB tengo que añadir nuevos parámetros a la configuración de linux para que funcione.

Por eso he editado la configuración basada en la existente para BCM47xx y ~~estoy generando un firmware nuevo~~ que sí que debería funcionar. Lo siento por todas estas pruebas inútiles que os hayan hecho perder el tiempo :$...

EDIT: Firmware -> https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_wl_bcma_parms.bin

Saludos.

Encima de todo el trabajo que te pegas, nos pides disculpas ??
Yo hago todas las pruebas que pueda, que menos ...

Voy a instalar primero el nuevo firm del hg556a y luego pruebo con este

jar229 · « **Respuesta #116 en:** 04-07-2012, 15:05 (Miércoles) »

Probado, el wifi sigue sin aparecer

dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Wed Jul 4 13:41:49 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a5a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29376k/32768k available (2248k kernel code, 3392k reserved, 400k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [

0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.352000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: PMU resource config unknown or not needed for device 0xA8D9
[ 0.376000] bcma: Workarounds unknown or not needed for device 0xA8D9
[ 0.408000] bcma: SPROM offset 0x800
[ 0.448000] bcma: Using SPROM revision 8 provided by platform.
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 2.924000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.144000] roboswitch: Probing device eth0:
[ 3.148000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.156000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.164000] roboswitch: Probing device eth1: No such device
[ 3.168000] roboswitch: Probing device eth2: No such device
[ 3.176000] roboswitch: Probing device eth3: No such device
[ 11.888000] NET: Registered protocol family 10
[ 11.952000] There is already a switch registered on the device 'eth0'
[ 11.960000] roboswitch: Probing device eth1: No such device
[ 11.968000] roboswitch: Probing device eth2: No such device
[ 11.972000] roboswitch: Probing device eth3: No such device
[ 13.480000] wl: module license 'unspecified' taints kernel.
[ 13.484000] Disabling lock debugging due to kernel taint
[ 13.592000] SSB/BCMA glue driver successfully attached
[ 13.620000] Button Hotplug driver version 0.4.1
[ 13.668000] PPP generic driver version 2.4.2
[ 13.892000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.088000] NET: Registered protocol family 24
[ 14.124000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.488000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.768000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.488000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.496000] device eth0 entered promiscuous mode
[ 19.504000] br-lan: port 1(eth0) entered forwarding state
[ 19.508000] br-lan: port 1(eth0) entered forwarding state
[ 21.512000] br-lan: port 1(eth0) entered forwarding state
[ 30.176000] eth0: no IPv6 routers present
[ 36.360000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.368000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.372000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 128.284000] JFFS2 notice: (996) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

[/spoiler]

Noltari · « **Respuesta #117 en:** 04-07-2012, 15:21 (Miércoles) »

Cita de: jar229 en 04-07-2012, 15:05 (Miércoles)

Probado, el wifi sigue sin aparecer

dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Wed Jul 4 13:41:49 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a5a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29376k/32768k available (2248k kernel code, 3392k reserved, 400k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [ 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.352000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: PMU resource config unknown or not needed for device 0xA8D9
[ 0.376000] bcma: Workarounds unknown or not needed for device 0xA8D9
[ 0.408000] bcma: SPROM offset 0x800
[ 0.448000] bcma: Using SPROM revision 8 provided by platform.
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.776000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.808000] Freeing unused kernel memory: 200k freed
[ 2.924000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.144000] roboswitch: Probing device eth0:
[ 3.148000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.156000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.164000] roboswitch: Probing device eth1: No such device
[ 3.168000] roboswitch: Probing device eth2: No such device
[ 3.176000] roboswitch: Probing device eth3: No such device
[ 11.888000] NET: Registered protocol family 10
[ 11.952000] There is already a switch registered on the device 'eth0'
[ 11.960000] roboswitch: Probing device eth1: No such device
[ 11.968000] roboswitch: Probing device eth2: No such device
[ 11.972000] roboswitch: Probing device eth3: No such device
[ 13.480000] wl: module license 'unspecified' taints kernel.
[ 13.484000] Disabling lock debugging due to kernel taint
[ 13.592000] SSB/BCMA glue driver successfully attached
[ 13.620000] Button Hotplug driver version 0.4.1
[ 13.668000] PPP generic driver version 2.4.2
[ 13.892000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.088000] NET: Registered protocol family 24
[ 14.124000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.488000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.768000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.488000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.496000] device eth0 entered promiscuous mode
[ 19.504000] br-lan: port 1(eth0) entered forwarding state
[ 19.508000] br-lan: port 1(eth0) entered forwarding state
[ 21.512000] br-lan: port 1(eth0) entered forwarding state
[ 30.176000] eth0: no IPv6 routers present
[ 36.360000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 36.368000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 36.372000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 128.284000] JFFS2 notice: (996) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

[/spoiler]

Pero en este sí que funciona el BCMA:

Citar

[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.352000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: PMU resource config unknown or not needed for device 0xA8D9
[ 0.376000] bcma: Workarounds unknown or not needed for device 0xA8D9
[ 0.408000] bcma: SPROM offset 0x800
[ 0.448000] bcma: Using SPROM revision 8 provided by platform.
[ 0.448000] bcma: Bus registered

Esto puede indicar que el driver wl no lo está detectando correctamente.

Voy a recompilar el firmware con brcsmac a ver si así sí funciona (no habíamos confirmado antes que con broadcom wl funcionara, pero sí con brcmsmac)...

Firmware: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcsmac.bin

Un rápido vistazo al driver wl me da que pensar que la versión que utiliza openwrt no soporta el 43225 usado por este dispositivo xDDD.

Saludos!

jar229 · « **Respuesta #118 en:** 04-07-2012, 19:12 (Miércoles) »

Citar

Esto puede indicar que el driver wl no lo está detectando correctamente.

Voy a recompilar el firmware con brcsmac a ver si así sí funciona (no habíamos confirmado antes que con broadcom wl funcionara, pero sí con brcmsmac)...

Firmware: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcsmac.bin

Un rápido vistazo al driver wl me da que pensar que la versión que utiliza openwrt no soporta el 43225 usado por este dispositivo xDDD.

Saludos!

Volvemos a tener wifi

dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Wed Jul 4 15:25:23 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a5a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29376k/32768k available (2248k kernel code, 3392k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [

0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: PMU resource config unknown or not needed for device 0xA8D9
[ 0.376000] bcma: Workarounds unknown or not needed for device 0xA8D9
[ 0.408000] bcma: SPROM offset 0x800
[ 0.448000] bcma: Using SPROM revision 8 provided by platform.
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.804000] Freeing unused kernel memory: 200k freed
[ 3.332000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.388000] roboswitch: Probing device eth0:
[ 3.392000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.404000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.408000] roboswitch: Probing device eth1: No such device
[ 3.416000] roboswitch: Probing device eth2: No such device
[ 3.420000] roboswitch: Probing device eth3: No such device
[ 9.424000] JFFS2 notice: (345) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 2 orphan) found.
[ 12.216000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.224000] Backport based on wireless-testing.git master-2012-06-14
[ 12.228000] compat.git: wireless-testing.git
[ 12.288000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.292000] cfg80211: World regulatory domain updated:
[ 12.300000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.308000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.316000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.324000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.332000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.340000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.736000] NET: Registered protocol family 10
[ 12.840000] There is already a switch registered on the device 'eth0'
[ 12.848000] roboswitch: Probing device eth1: No such device
[ 12.856000] roboswitch: Probing device eth2: No such device
[ 12.860000] roboswitch: Probing device eth3: No such device
[ 13.260000] Button Hotplug driver version 0.4.1
[ 13.424000] PPP generic driver version 2.4.2
[ 13.860000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.224000] bcma: Switched to core: 0x812
[ 14.224000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.232000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.248000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.452000] NET: Registered protocol family 24
[ 14.488000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.868000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.156000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.492000] device eth0 entered promiscuous mode
[ 19.500000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.512000] br-lan: port 1(eth0) entered forwarding state
[ 19.516000] br-lan: port 1(eth0) entered forwarding state
[ 21.520000] br-lan: port 1(eth0) entered forwarding state
[ 21.628000] dummy
[ 21.628000] dummy
[ 21.632000] dummy
[ 21.632000] dummy
[ 21.636000] dummy
[ 21.636000] dummy
[ 21.640000] dummy
[ 21.640000] dummy
[ 21.644000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 21.652000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 21.716000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.152000] dummy
[ 25.156000] dummy
[ 25.160000] dummy
[ 25.160000] dummy
[ 25.164000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 25.172000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 25.180000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 25.188000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.140000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 30.168000] eth0: no IPv6 routers present
[ 35.888000] wlan0: no IPv6 routers present

[/spoiler]

Ahora queda probarlo y ver si hay diferencia de rendimiento

Noltari · « **Respuesta #119 en:** 04-07-2012, 19:38 (Miércoles) »

Cita de: jar229 en 04-07-2012, 19:12 (Miércoles)

Citar
Esto puede indicar que el driver wl no lo está detectando correctamente.

Voy a recompilar el firmware con brcsmac a ver si así sí funciona (no habíamos confirmado antes que con broadcom wl funcionara, pero sí con brcmsmac)...

Firmware: https://dl.dropbox.com/u/4708147/openwrt/63281T/openwrt-963281T_TEF-generic-squashfs-cfe_brcsmac.bin

Un rápido vistazo al driver wl me da que pensar que la versión que utiliza openwrt no soporta el 43225 usado por este dispositivo xDDD.

Saludos!

Volvemos a tener wifi

dmesg

[spoiler]
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Wed Jul 4 15:25:23 CEST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 32MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: A4001N-V0003
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 963281T_TEF
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802a5a60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 29376k/32768k available (2248k kernel code, 3392k reserved, 399k data, 200k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.048000] NET: Registered protocol family 16
[ 0.276000] registering PCI controller with io_map_base unset
[ 0.288000] bio: create slab <bio-0> at 0
[ 0.296000] PCI host bridge to bus 0000:00
[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x11efffff]
[ 0.304000] pci_bus 0000:00: root bus resource [ 0x00000000 flags 0x0]
[ 0.308000] pci 0000:00:00.0: [14e4:6328] type 1 class 0x000604
[ 0.308000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.308000] pci 0000:01:00.0: [14e4:a8d8] type 0 class 0x000280
[ 0.308000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.308000] pci 0000:01:00.0: supports D1 D2
[ 0.308000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.312000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
[ 0.316000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.320000] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.324000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.328000] Switching to clocksource MIPS
[ 0.336000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 0.344000] bcma: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
[ 0.348000] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 0.360000] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 0.368000] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 0.376000] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 0.376000] bcma: PMU resource config unknown or not needed for device 0xA8D9
[ 0.376000] bcma: Workarounds unknown or not needed for device 0xA8D9
[ 0.408000] bcma: SPROM offset 0x800
[ 0.448000] bcma: Using SPROM revision 8 provided by platform.
[ 0.448000] bcma: Bus registered
[ 0.452000] NET: Registered protocol family 2
[ 0.456000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.464000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.472000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.484000] TCP reno registered
[ 0.488000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.492000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500000] NET: Registered protocol family 1
[ 0.504000] PCI: CLS 0 bytes, default 16
[ 0.508000] audit: initializing netlink socket (disabled)
[ 0.512000] type=2000 audit(0.512:1): initialized
[ 0.520000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.536000] msgmni has been set to 57
[ 0.540000] io scheduler noop registered
[ 0.544000] io scheduler deadline registered (default)
[ 0.552000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
[ 0.560000] console [ttyS0] enabled, bootconsole disabled
[ 0.576000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 0.584000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.588000] bcm63xxpart: CFE boot tag found with version 6 and board type 963281T_TEF
[ 0.596000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.604000] bcm63xxpart: Partition 1 is kernel offset 10100 and length eff00
[ 0.612000] bcm63xxpart: Partition 2 is rootfs offset 100000 and length ef0000
[ 0.616000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
[ 0.624000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
[ 0.632000] bcm63xxpart: Spare partition is offset 2e0004 and length d0fffc
[ 0.640000] 5 bcm63xxpart partitions found on MTD device spi0.0
[ 0.644000] Creating 5 MTD partitions on "spi0.0":
[ 0.652000] 0x000000000000-0x000000010000 : "CFE"
[ 0.660000] 0x000000010100-0x000000100000 : "kernel"
[ 0.664000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.680000] 0x000000100000-0x000000ff0000 : "rootfs"
[ 0.688000] mtd: partition "rootfs" set to be root filesystem
[ 0.692000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.700000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.708000] 0x000000ff0000-0x000001000000 : "nvram"
[ 0.716000] 0x000000010000-0x000000ff0000 : "linux"
[ 0.760000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.768000] Registered led device: 963281T_TEF:green:power
[ 0.768000] Registered led device: 963281T_TEF:red:stop
[ 0.768000] Registered led device: 963281T_TEF:green:inet
[ 0.772000] Registered led device: 963281T_TEF:red:inet-fail
[ 0.772000] Registered led device: 963281T_TEF:green:ppp
[ 0.772000] Registered led device: 963281T_TEF:red:ppp-fail
[ 0.772000] Registered led device: 963281T_TEF:green:3g
[ 0.772000] Registered led device: 963281T_TEF:red:3g-fail
[ 0.772000] Registered led device: 963281T_TEF:green:wlan
[ 0.772000] Registered led device: 963281T_TEF:red:wlan-fail
[ 0.772000] Registered led device: 963281T_TEF:green:eth
[ 0.776000] Registered led device: 963281T_TEF:red:eth-fail
[ 0.776000] TCP cubic registered
[ 0.780000] NET: Registered protocol family 17
[ 0.784000] 8021q: 802.1Q VLAN Support v1.8
[ 0.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.804000] Freeing unused kernel memory: 200k freed
[ 3.332000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 3.388000] roboswitch: Probing device eth0:
[ 3.392000] bcm63xx_enet: could not find a used port with phy_id 0, assuming phy is external
[ 3.404000] No Robo switch in managed mode found, phy_id = 0xffffffff
[ 3.408000] roboswitch: Probing device eth1: No such device
[ 3.416000] roboswitch: Probing device eth2: No such device
[ 3.420000] roboswitch: Probing device eth3: No such device
[ 9.424000] JFFS2 notice: (345) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 2 orphan) found.
[ 12.216000] Compat-wireless backport release: compat-wireless-2012-06-14
[ 12.224000] Backport based on wireless-testing.git master-2012-06-14
[ 12.228000] compat.git: wireless-testing.git
[ 12.288000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.292000] cfg80211: World regulatory domain updated:
[ 12.300000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.308000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.316000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.324000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.332000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.340000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.736000] NET: Registered protocol family 10
[ 12.840000] There is already a switch registered on the device 'eth0'
[ 12.848000] roboswitch: Probing device eth1: No such device
[ 12.856000] roboswitch: Probing device eth2: No such device
[ 12.860000] roboswitch: Probing device eth3: No such device
[ 13.260000] Button Hotplug driver version 0.4.1
[ 13.424000] PPP generic driver version 2.4.2
[ 13.860000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
[ 14.224000] bcma: Switched to core: 0x812
[ 14.224000] brcmsmac: use fifi: 20, 192, 192, 21, 17, 5
[ 14.232000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.248000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.452000] NET: Registered protocol family 24
[ 14.488000] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 14.868000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.156000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[ 19.492000] device eth0 entered promiscuous mode
[ 19.500000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
[ 19.512000] br-lan: port 1(eth0) entered forwarding state
[ 19.516000] br-lan: port 1(eth0) entered forwarding state
[ 21.520000] br-lan: port 1(eth0) entered forwarding state
[ 21.628000] dummy
[ 21.628000] dummy
[ 21.632000] dummy
[ 21.632000] dummy
[ 21.636000] dummy
[ 21.636000] dummy
[ 21.640000] dummy
[ 21.640000] dummy
[ 21.644000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 21.652000] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 21.716000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.152000] dummy
[ 25.156000] dummy
[ 25.160000] dummy
[ 25.160000] dummy
[ 25.164000] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 25.172000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 25.180000] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 25.188000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.140000] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 30.168000] eth0: no IPv6 routers present
[ 35.888000] wlan0: no IPv6 routers present

[/spoiler]

Ahora queda probarlo y ver si hay diferencia de rendimiento

Queda claro entonces que no se puede usar el driver broadcom wl, puesto que la versión que hay en Openwrt es demasiado antigua para soportar el 43225.

Así pues quedan dos alternativas: Usar brcmsmac (la última versión lo incluye). O usar b43.

El problema de brcmsmac es que habéis comentado que su rendimiento no es adecuado y produce cortes.
El problema de b43 es que no soporta Wifi N (el wifi queda limitado a b/g).

No sé si hay alguna forma de actualizar el driver wl en openwrt, si alguien sabe algo al respecto, nos vendría bien algo de luz

.

Saludos!

Noticias:

Autor Tema: [Desarrollo] OpenWrt en Telefónica Home Station ADB P.DG A4001N1 (Leído 390543 veces)

Noltari

Noltari

gmtii

Noltari

Noltari

Noltari

Noltari

Noltari

Noltari

Noltari

Noltari