Equipos y materiales > Openwrt & LEDE |
[Desarrollo] OpenWrt en Huawei HG622 |
<< < (28/32) > >> |
pepexx:
Ah vale. Los busqué porque había visto que estaban en los dts de otros routers y creía que faltaban en éste. :-[ Gracias por los parches. Saludos. |
Noltari:
Buenas, Ya han aceptado los parches para este router en el repositorio oficial: https://dev.openwrt.org/changeset/48305 Saludos! |
pepexx:
Una noticia estupenda! >:( >:( >:( >:( >:( >:( >:( >:( >:( >:( Muchas gracias a todos los que lo habéis hecho posible. Saludos. ;) |
driversat:
hola hermanos el wifi no funciona conmigo HG622 con: http://files.noltari.es/openwrt/firmwares/beta/openwrt-brcm63xx-smp-HG622-squashfs-cfe.bin ø CFE version 2.0.3 for BCM63XX (32bit,SP,BE) Build Date: Sat Dec 19 20:07:51 CET 2015 (dani@tool) Copyright (C) 2000-2009 Broadcom Corporation. Parallel flash device: name AM29LV320MT, id 0x2201 size 16384KB Total Flash size: 16384K with 128 sectors Chip ID: BCM6368B2, MIPS: 400MHz Main Thread: TP1 Total Memory: 33554432 bytes (32MB) Boot Address: 0xb8000000 Board IP address : 192.168.1.1:ffffff00 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 3 Board Id (0-15) : 96368MVWG_hg622 Number of MAC Addresses (1-32) : 10 Base MAC Address : bc:76:xx:xx:xx:xx PSI Size (1-64) KBytes : 24 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Main Thread Number [0|1] : 1 Voice Board Configuration (0-19) : *** Press any key to stop auto run (3 seconds) *** Auto run second count down: 0 Booting from only image (0xb8020000) ... Code Address: 0x80A00000, Entry Address: 0x80a00000 LZMA: Prossible old LZMA format, trying to decompress.. Decompression OK! Entry at 0x80a00000 Closing network. Disabling Switch ports. Flushing Receive Buffers... 178 buffers found. Closing DMA Channels. Starting program at 0x80a00000 [ 0.000000] Linux version 4.1.13 (noltari@skynet) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r47670) ) #3 SMP Mon Dec 14 23:00:05 CET 2015 [ 0.000000] Detected Broadcom 0x6368 CPU revision b2 [ 0.000000] CPU frequency is 400 MHz [ 0.000000] 32MB of RAM installed [ 0.000000] board_bcm963xx: Boot address 0xb8000000 [ 0.000000] board_bcm963xx: CFE version: 1.0.37-106.24 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0002a031 (Broadcom BMIPS4350) [ 0.000000] board: board name: 96368MVWG_hg622 [ 0.000000] MIPS: machine is Huawei HG622 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 0.000000] PERCPU: Embedded 10 pages/cpu @81046000 s10048 r8192 d22720 u40960 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Memory: 26844K/32768K available (3209K kernel code, 141K rwdata, 616K rodata, 1272K init, 203K bss, 5924K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:256 [ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.008677] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648) [ 0.046958] pid_max: default: 32768 minimum: 301 [ 0.052391] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.059174] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.072835] SMP: Booting CPU1... [ 19.579434] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 19.579450] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 19.579760] CPU1 revision is: 0002a031 (Broadcom BMIPS4350) [ 0.124936] Synchronize counters for CPU 1: [ 0.124937] SMP: CPU1 is running [ 0.124956] done. [ 0.125151] Brought up 2 CPUs [ 0.143849] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.155283] NET: Registered protocol family 16 [ 0.165691] registering PCI controller with io_map_base unset [ 0.196679] PCI host bridge to bus 0000:00 [ 0.200924] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff] [ 0.208104] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff] [ 0.214974] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.221955] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.238564] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff] [ 0.248537] Switched to clocksource MIPS [ 0.256419] NET: Registered protocol family 2 [ 0.262586] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.269816] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.276367] TCP: Hash tables configured (established 1024 bind 1024) [ 0.283099] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.289129] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.296060] NET: Registered protocol family 1 [ 0.303022] futex hash table entries: 512 (order: 1, 8192 bytes) [ 0.310728] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.316821] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.330235] io scheduler noop registered [ 0.334288] io scheduler deadline registered (default) [ 0.341874] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10, base_baud = 1Ê[ 0.351514] console [ttyS0] enabled [ 0.351514] console [ttyS0] enabled [ 0.358648] bootconsole [early0] disabled [ 0.358648] bootconsole [early0] disabled [ 0.367893] bcm63xx-rng bcm63xx-rng: registered RNG driver [ 0.375253] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e [ 0.385610] Amd/Fujitsu Extended Query Table at 0x0040 [ 0.390890] Amd/Fujitsu Extended Query version 1.3. [ 0.396055] number of CFI chips: 1 [ 0.399891] bcm63xxpart: CFE boot tag found with version 7 and board type 96368MVWG_hg622 [ 0.408424] 6 bcm63xxpart partitions found on MTD device 18000000.nor [ 0.415085] Creating 6 MTD partitions on "18000000.nor": [ 0.420572] 0x000000000000-0x000000020000 : "CFE" [ 0.427382] 0x000000020100-0x00000016e5d0 : "kernel" [ 0.434411] 0x00000016e5d0-0x000000fa0000 : "rootfs" [ 0.441577] mtd: device 2 (rootfs) set to be root filesystem [ 0.447434] 1 squashfs-split partitions found on MTD device rootfs [ 0.453791] 0x0000003a0000-0x000000fa0000 : "rootfs_data" [ 0.461377] 0x000000020000-0x000000fa0000 : "linux" [ 0.468382] 0x000000fa0000-0x000000fc0000 : "cal_data" [ 0.475615] 0x000000fe0000-0x000001000000 : "nvram" [ 0.484144] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542) [ 0.530108] b53_common: found switch: BCM63xx, rev 0 [ 0.535869] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec [ 0.545342] NET: Registered protocol family 10 [ 0.552423] NET: Registered protocol family 17 [ 0.557143] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.570156] 8021q: 802.1Q VLAN Support v1.8 [ 0.583550] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 0.605178] Freeing unused kernel memory: 1272K (803f2000 - 80530000) [ 2.058769] init: Console is alive [ 2.062641] init: - watchdog - [ 3.237087] usbcore: registered new interface driver usbfs [ 3.242945] usbcore: registered new interface driver hub [ 3.248706] usbcore: registered new device driver usb [ 3.264047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.272724] ehci-platform: EHCI generic platform driver [ 3.380556] ehci-platform ehci-platform: EHCI Host Controller [ 3.386520] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 3.394972] ehci-platform ehci-platform: irq 15, io mem 0xb0001500 [ 3.412536] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored [ 3.422387] hub 1-0:1.0: USB hub found [ 3.426363] hub 1-0:1.0: 2 ports detected [ 3.437137] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.445527] ohci-platform: OHCI generic platform driver [ 3.451105] ohci-platform ohci-platform: Generic Platform OHCI controller [ 3.458139] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2 [ 3.466461] ohci-platform ohci-platform: irq 13, io mem 0xb0001600 [ 3.534202] hub 2-0:1.0: USB hub found [ 3.538183] hub 2-0:1.0: 2 ports detected [ 4.067072] init: - preinit - [ 4.529184] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port4, 100Mbps, full-duplex ip: RTNETLINK answers: File exists ip: RTNETLINK answers: File exists Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level ip: RTNETLINK answers: File exists [ 8.085202] jffs2: notice: (285) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 8.103018] mount_root: switching to jffs2 overlay [ 8.148852] procd: - early - [ 8.151850] procd: - watchdog - [ 8.947453] procd: - ubus - [ 9.368582] random: nonblocking pool is initialized [ 9.955647] procd: - init - Please press Enter to activate this console. [ 11.074170] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.099342] Loading modules backported from Linux version master-2015-12-03-0-g1677f62 [ 11.107528] Backport generated by backports.git backports-20151120-0-g906a6b3 [ 11.120782] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.143423] nf_conntrack version 0.5.0 (439 buckets, 1756 max) [ 11.241480] xt_time: kernel timezone is -0000 [ 11.273067] cfg80211: World regulatory domain updated: [ 11.278398] cfg80211: DFS Master region: unset [ 11.282923] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.292951] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.301191] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.309429] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.317684] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 11.327445] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.337211] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.345540] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.353783] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.423447] PPP generic driver version 2.4.2 [ 11.430642] NET: Registered protocol family 24 [ 11.468364] PCI: Enabling device 0000:00:01.0 (0000 -> 0002) [ 11.476008] rt2800pci 0000:00:01.0: failed to load eeprom property <===== porque??? [ 11.482371] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'rt2x00.eeprom'. [ 11.493427] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected [ 11.501450] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected [ 19.477183] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port4, 100Mbps, full-duplex [ 19.496332] device eth0.1 entered promiscuous mode [ 19.501362] device eth0 entered promiscuous mode [ 19.512326] br-lan: port 1(eth0.1) entered forwarding state [ 19.518200] br-lan: port 1(eth0.1) entered forwarding state [ 21.086369] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 21.221152] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 21.334347] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.346207] device wlan0 entered promiscuous mode [ 21.351354] br-lan: port 2(wlan0) entered forwarding state [ 21.357080] br-lan: port 2(wlan0) entered forwarding state [ 21.376917] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 21.520554] br-lan: port 1(eth0.1) entered forwarding state [ 23.360518] br-lan: port 2(wlan0) entered forwarding state BusyBox v1.24.1 (2015-12-14 22:30:53 CET) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- DESIGNATED DRIVER (Bleeding Edge, r47892) ----------------------------------------------------- * 2 oz. Orange Juice ÃY.J¹a * 2 oz. Pineapple Juice tall glass filled with * 2 oz. Grapefruit Juice ice, stir well. * 2 oz. Cranberry Juice ----------------------------------------------------- root@OpenWrt:/# Editado para borrar la dirección MAC |
Tki2000:
--- Cita de: driversat en 02-03-2016, 01:18 (Miércoles) ---hola hermanos el wifi no funciona conmigo HG622 con: http://files.noltari.es/openwrt/firmwares/beta/openwrt-brcm63xx-smp-HG622-squashfs-cfe.bin ø CFE version 2.0.3 for BCM63XX (32bit,SP,BE) Build Date: Sat Dec 19 20:07:51 CET 2015 (dani@tool) Copyright (C) 2000-2009 Broadcom Corporation. Parallel flash device: name AM29LV320MT, id 0x2201 size 16384KB Total Flash size: 16384K with 128 sectors Chip ID: BCM6368B2, MIPS: 400MHz Main Thread: TP1 Total Memory: 33554432 bytes (32MB) Boot Address: 0xb8000000 Board IP address : 192.168.1.1:ffffff00 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 3 Board Id (0-15) : 96368MVWG_hg622 Number of MAC Addresses (1-32) : 10 Base MAC Address : bc:76:xx:xx:xx:xx PSI Size (1-64) KBytes : 24 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Main Thread Number [0|1] : 1 Voice Board Configuration (0-19) : *** Press any key to stop auto run (3 seconds) *** Auto run second count down: 0 Booting from only image (0xb8020000) ... Code Address: 0x80A00000, Entry Address: 0x80a00000 LZMA: Prossible old LZMA format, trying to decompress.. Decompression OK! Entry at 0x80a00000 Closing network. Disabling Switch ports. Flushing Receive Buffers... 178 buffers found. Closing DMA Channels. Starting program at 0x80a00000 [ 0.000000] Linux version 4.1.13 (noltari@skynet) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r47670) ) #3 SMP Mon Dec 14 23:00:05 CET 2015 [ 0.000000] Detected Broadcom 0x6368 CPU revision b2 [ 0.000000] CPU frequency is 400 MHz [ 0.000000] 32MB of RAM installed [ 0.000000] board_bcm963xx: Boot address 0xb8000000 [ 0.000000] board_bcm963xx: CFE version: 1.0.37-106.24 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0002a031 (Broadcom BMIPS4350) [ 0.000000] board: board name: 96368MVWG_hg622 [ 0.000000] MIPS: machine is Huawei HG622 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 0.000000] PERCPU: Embedded 10 pages/cpu @81046000 s10048 r8192 d22720 u40960 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Memory: 26844K/32768K available (3209K kernel code, 141K rwdata, 616K rodata, 1272K init, 203K bss, 5924K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:256 [ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.008677] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648) [ 0.046958] pid_max: default: 32768 minimum: 301 [ 0.052391] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.059174] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.072835] SMP: Booting CPU1... [ 19.579434] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 19.579450] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 19.579760] CPU1 revision is: 0002a031 (Broadcom BMIPS4350) [ 0.124936] Synchronize counters for CPU 1: [ 0.124937] SMP: CPU1 is running [ 0.124956] done. [ 0.125151] Brought up 2 CPUs [ 0.143849] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.155283] NET: Registered protocol family 16 [ 0.165691] registering PCI controller with io_map_base unset [ 0.196679] PCI host bridge to bus 0000:00 [ 0.200924] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff] [ 0.208104] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff] [ 0.214974] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.221955] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.238564] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff] [ 0.248537] Switched to clocksource MIPS [ 0.256419] NET: Registered protocol family 2 [ 0.262586] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.269816] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.276367] TCP: Hash tables configured (established 1024 bind 1024) [ 0.283099] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.289129] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.296060] NET: Registered protocol family 1 [ 0.303022] futex hash table entries: 512 (order: 1, 8192 bytes) [ 0.310728] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.316821] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.330235] io scheduler noop registered [ 0.334288] io scheduler deadline registered (default) [ 0.341874] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10, base_baud = 1Ê[ 0.351514] console [ttyS0] enabled [ 0.351514] console [ttyS0] enabled [ 0.358648] bootconsole [early0] disabled [ 0.358648] bootconsole [early0] disabled [ 0.367893] bcm63xx-rng bcm63xx-rng: registered RNG driver [ 0.375253] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e [ 0.385610] Amd/Fujitsu Extended Query Table at 0x0040 [ 0.390890] Amd/Fujitsu Extended Query version 1.3. [ 0.396055] number of CFI chips: 1 [ 0.399891] bcm63xxpart: CFE boot tag found with version 7 and board type 96368MVWG_hg622 [ 0.408424] 6 bcm63xxpart partitions found on MTD device 18000000.nor [ 0.415085] Creating 6 MTD partitions on "18000000.nor": [ 0.420572] 0x000000000000-0x000000020000 : "CFE" [ 0.427382] 0x000000020100-0x00000016e5d0 : "kernel" [ 0.434411] 0x00000016e5d0-0x000000fa0000 : "rootfs" [ 0.441577] mtd: device 2 (rootfs) set to be root filesystem [ 0.447434] 1 squashfs-split partitions found on MTD device rootfs [ 0.453791] 0x0000003a0000-0x000000fa0000 : "rootfs_data" [ 0.461377] 0x000000020000-0x000000fa0000 : "linux" [ 0.468382] 0x000000fa0000-0x000000fc0000 : "cal_data" [ 0.475615] 0x000000fe0000-0x000001000000 : "nvram" [ 0.484144] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542) [ 0.530108] b53_common: found switch: BCM63xx, rev 0 [ 0.535869] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec [ 0.545342] NET: Registered protocol family 10 [ 0.552423] NET: Registered protocol family 17 [ 0.557143] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.570156] 8021q: 802.1Q VLAN Support v1.8 [ 0.583550] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 0.605178] Freeing unused kernel memory: 1272K (803f2000 - 80530000) [ 2.058769] init: Console is alive [ 2.062641] init: - watchdog - [ 3.237087] usbcore: registered new interface driver usbfs [ 3.242945] usbcore: registered new interface driver hub [ 3.248706] usbcore: registered new device driver usb [ 3.264047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.272724] ehci-platform: EHCI generic platform driver [ 3.380556] ehci-platform ehci-platform: EHCI Host Controller [ 3.386520] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 3.394972] ehci-platform ehci-platform: irq 15, io mem 0xb0001500 [ 3.412536] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored [ 3.422387] hub 1-0:1.0: USB hub found [ 3.426363] hub 1-0:1.0: 2 ports detected [ 3.437137] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.445527] ohci-platform: OHCI generic platform driver [ 3.451105] ohci-platform ohci-platform: Generic Platform OHCI controller [ 3.458139] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2 [ 3.466461] ohci-platform ohci-platform: irq 13, io mem 0xb0001600 [ 3.534202] hub 2-0:1.0: USB hub found [ 3.538183] hub 2-0:1.0: 2 ports detected [ 4.067072] init: - preinit - [ 4.529184] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port4, 100Mbps, full-duplex ip: RTNETLINK answers: File exists ip: RTNETLINK answers: File exists Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level ip: RTNETLINK answers: File exists [ 8.085202] jffs2: notice: (285) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 8.103018] mount_root: switching to jffs2 overlay [ 8.148852] procd: - early - [ 8.151850] procd: - watchdog - [ 8.947453] procd: - ubus - [ 9.368582] random: nonblocking pool is initialized [ 9.955647] procd: - init - Please press Enter to activate this console. [ 11.074170] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.099342] Loading modules backported from Linux version master-2015-12-03-0-g1677f62 [ 11.107528] Backport generated by backports.git backports-20151120-0-g906a6b3 [ 11.120782] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.143423] nf_conntrack version 0.5.0 (439 buckets, 1756 max) [ 11.241480] xt_time: kernel timezone is -0000 [ 11.273067] cfg80211: World regulatory domain updated: [ 11.278398] cfg80211: DFS Master region: unset [ 11.282923] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.292951] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.301191] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.309429] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.317684] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 11.327445] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.337211] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.345540] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.353783] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.423447] PPP generic driver version 2.4.2 [ 11.430642] NET: Registered protocol family 24 [ 11.468364] PCI: Enabling device 0000:00:01.0 (0000 -> 0002) [ 11.476008] rt2800pci 0000:00:01.0: failed to load eeprom property <===== porque??? [ 11.482371] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'rt2x00.eeprom'. [ 11.493427] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected [ 11.501450] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected [ 19.477183] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port4, 100Mbps, full-duplex [ 19.496332] device eth0.1 entered promiscuous mode [ 19.501362] device eth0 entered promiscuous mode [ 19.512326] br-lan: port 1(eth0.1) entered forwarding state [ 19.518200] br-lan: port 1(eth0.1) entered forwarding state [ 21.086369] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 21.221152] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 21.334347] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.346207] device wlan0 entered promiscuous mode [ 21.351354] br-lan: port 2(wlan0) entered forwarding state [ 21.357080] br-lan: port 2(wlan0) entered forwarding state [ 21.376917] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 21.520554] br-lan: port 1(eth0.1) entered forwarding state [ 23.360518] br-lan: port 2(wlan0) entered forwarding state BusyBox v1.24.1 (2015-12-14 22:30:53 CET) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- DESIGNATED DRIVER (Bleeding Edge, r47892) ----------------------------------------------------- * 2 oz. Orange Juice ÃY.J¹a * 2 oz. Pineapple Juice tall glass filled with * 2 oz. Grapefruit Juice ice, stir well. * 2 oz. Cranberry Juice ----------------------------------------------------- root@OpenWrt:/# --- Fin de la cita --- Pues yo la veo funcionando. ¿Le has dado a activar la wifi? |
Navegación |
Índice de Mensajes |
Página Siguiente |
Página Anterior |