Autor Tema: [Desarrollo] OpenWrt en Huawei HG556a  (Leído 1910960 veces)

0 Usuarios y 1 Visitante están viendo este tema.

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4604
Re: OpenWRT en Huawei hg556a
« Respuesta #460 en: 16-07-2012, 00:51 (Lunes) »


Pues nada, esto está hecho chavales, ya tenemos un único firmware funcional en todos los HG556a.
Gracias a todos los que lo habéis hecho posible y en especial a danitool por el código en el que nos hemos basado y a gmtii por su contribución a los ralink. Y gracias también a todos los que habéis ayudado con las pruebas :D.

Por cierto, voy a esperar a que me acepten cuatro parches que tengo pendientes para enviar los parches de este router, que si no va a ser un jaleo curioso...

Saludos!


>:( >:( >:(


Valoraciones positivas en compra/venta:
175 en Htcmania
240 en Har2mano
12 en gsmspain
 ....
 
Mis equipos en venta: https://drive.google.com/open?id=1Zi_bqLSfg_qCT8sx6JhPaWVvSeZXpcka

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4604
Re: OpenWRT en Huawei hg556a
« Respuesta #461 en: 16-07-2012, 08:18 (Lunes) »
Actualizado primer post del hilo.
Si me he olvidado algo, comentad, please  ;)
« Última modificación: 16-07-2012, 09:38 (Lunes) por jar229 »
Valoraciones positivas en compra/venta:
175 en Htcmania
240 en Har2mano
12 en gsmspain
 ....
 
Mis equipos en venta: https://drive.google.com/open?id=1Zi_bqLSfg_qCT8sx6JhPaWVvSeZXpcka

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #462 en: 16-07-2012, 09:43 (Lunes) »
Actualizado primer post del hilo.
Si me he olvidado algo, comentad, please  ;)
A mi me parece que está "ferpect" :D.

tool

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #463 en: 16-07-2012, 11:08 (Lunes) »
Algún consejo para la configuración WDS?

A ver si hago un TEST con 3 HG556a

Atheros  --- Ralink --- Ralink.

Todo esto saliendo por eth de un HG556a de VF.

Todavía tengo que ver como configurar como cliente transparente los Ralink. (sin relayd)

Desconectado geminis_demon

  • Colaborador
  • *
  • Mensajes: 2377
  • Prácticas precisas precisan práctica
Re: OpenWRT en Huawei hg556a
« Respuesta #464 en: 16-07-2012, 12:52 (Lunes) »
Este firmware debería ser compatible con todos los modelos de HG556a.
https://dl.dropbox.com/u/4708147/openwrt/hw556/openwrt-HW556-squashfs-cfe_r32738.bin

He actualizado los parches SVN: https://dl.dropbox.com/u/4708147/openwrt/hw556/hw556_svn_all.patch
Eeprom que también hay que añadir al SVN: https://dl.dropbox.com/u/4708147/openwrt/hw556/rt3062_eeprom.zip

Espero feedback de todos :3!

Saludos!

A mi no me funciona  :(

Solo consigo conectarme al router configurando la ip manualmente pero aun que se conecte no tengo acceso al router ni por telnet, ssh, luci ni nada. Tampoco tengo ping.

Lo he flasheado desde el bootloader, lo he vuelto a descargar y comparado los md5 por si se habia descargado mal, he repetido el proceso de flasheado 3 veces y nada.

Mi router es ralink, la mac de la pegatina es 04:C0:6F:XX:XX:XX y la del wifi es 6A:C0:6F:XX:XX:XX.

No tengo cable serial asi que no puedo dar mas información.

¿Alguna idea?

La luz cree que viaja más rápido que cualquier otra cosa, pero se equivoca; da lo mismo lo rápido que pueda viajar, porque al final, la luz descubre que la oscuridad ha llegado antes que ella, y la está esperando.

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4604
Re: OpenWRT en Huawei hg556a
« Respuesta #465 en: 16-07-2012, 13:02 (Lunes) »
Algún consejo para la configuración WDS?

A ver si hago un TEST con 3 HG556a

Atheros  --- Ralink --- Ralink.

Todo esto saliendo por eth de un HG556a de VF.

Todavía tengo que ver como configurar como cliente transparente los Ralink. (sin relayd)

Casi con toda seguridad el enlace WDS entre diferentes chipsets wifis no te va funcionar.
Yo lo he tenido funcionando (con bastante buen rendimiento) con dos hg556a, ambos con atheros.
La configuración es muy sencilla, uno lo pones como Punto de Acceso WDS y el otro como cliente WDS, mismo nombre de red, misma encriptación y clave.
Los equipos que conectes (tanto por cable, como por wifi) a los routers, quedan todos en la misma subred.

En cuanto al 'puente cliente transparente' con los Ralink, yo te aconsejo que pruebes con relayd.
Recuerda que después de instalar relayd, hay que activarlo para que se ejecute al inicio: /etc/init.d/relayd enable
Valoraciones positivas en compra/venta:
175 en Htcmania
240 en Har2mano
12 en gsmspain
 ....
 
Mis equipos en venta: https://drive.google.com/open?id=1Zi_bqLSfg_qCT8sx6JhPaWVvSeZXpcka

Chumpy

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #466 en: 16-07-2012, 14:10 (Lunes) »
Noltari, podías indicar que incluye el último firm?, para que ya quede todo clarito clarito.

Muchas gracias por tu trabajo y el de todos los que han colaborado.
https://foro.seguridadwireless.net/openwrt/openwrt-en-huaweig-hg556a/msg247502/#msg247502

Perdonad que sea tan novato en esto, pero se que algunos firm, traen algunos paquetes añadidos, como el que trae transmisions, pure-ftp... o simplemente incluir o no Luci o relayd se que se pueden descargar y agregar pero se que también pueden venir inculuidos, la verdad desconozco completamente si existe una lista de paqutes básicos que la mayoría de los firm incluyan. De todas formas reconozco que la culpa es solo mía, en cuanto tenga un rato lo descargaré y lo probaré en mi router, y ya de paso podré mirar que trae y que no.

Un saludo y muchas gracias por vuestro trabajo.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #467 en: 16-07-2012, 14:54 (Lunes) »
Noltari, podías indicar que incluye el último firm?, para que ya quede todo clarito clarito.

Muchas gracias por tu trabajo y el de todos los que han colaborado.
https://foro.seguridadwireless.net/openwrt/openwrt-en-huaweig-hg556a/msg247502/#msg247502

Perdonad que sea tan novato en esto, pero se que algunos firm, traen algunos paquetes añadidos, como el que trae transmisions, pure-ftp... o simplemente incluir o no Luci o relayd se que se pueden descargar y agregar pero se que también pueden venir inculuidos, la verdad desconozco completamente si existe una lista de paqutes básicos que la mayoría de los firm incluyan. De todas formas reconozco que la culpa es solo mía, en cuanto tenga un rato lo descargaré y lo probaré en mi router, y ya de paso podré mirar que trae y que no.

Un saludo y muchas gracias por vuestro trabajo.
Lleva lo básico + luci + ip6tables + kmod-usb2 + kmod-usb-ohci + kmod-usb-core + kmod-usb-storage + kmod-usb-storage-extras.

Saludos.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #468 en: 16-07-2012, 14:58 (Lunes) »
Este firmware debería ser compatible con todos los modelos de HG556a.
https://dl.dropbox.com/u/4708147/openwrt/hw556/openwrt-HW556-squashfs-cfe_r32738.bin

He actualizado los parches SVN: https://dl.dropbox.com/u/4708147/openwrt/hw556/hw556_svn_all.patch
Eeprom que también hay que añadir al SVN: https://dl.dropbox.com/u/4708147/openwrt/hw556/rt3062_eeprom.zip

Espero feedback de todos :3!

Saludos!

A mi no me funciona  :(

Solo consigo conectarme al router configurando la ip manualmente pero aun que se conecte no tengo acceso al router ni por telnet, ssh, luci ni nada. Tampoco tengo ping.

Lo he flasheado desde el bootloader, lo he vuelto a descargar y comparado los md5 por si se habia descargado mal, he repetido el proceso de flasheado 3 veces y nada.

Mi router es ralink, la mac de la pegatina es 04:C0:6F:XX:XX:XX y la del wifi es 6A:C0:6F:XX:XX:XX.

No tengo cable serial asi que no puedo dar mas información.

¿Alguna idea?
Podría ser cuestión de la mac, que no esté en la comprobación de los modelos.

También puede ser cuestión de la configuración: ¿Has flasheado el firmware guardando la configuración a través de LuCI desde el firmware de gmtii o de danitool?, ¿o lo has flasheado a través del cfe, encendiéndolo manteniendo pulsado el botón de reset?

De cualquier forma voy a quitar el panic() que bloquea los routers si no se identifica el hardware para ahorrarnos esto. Protejo los dos últimos megas de la flash para no borrar datos del wifi y fuera. Los routers que no se hayan identificado iniciarán sin wifi en el caso de ser atheros, pero iniciarán, que es lo que importa.

Saludos.

Desconectado geminis_demon

  • Colaborador
  • *
  • Mensajes: 2377
  • Prácticas precisas precisan práctica
Re: OpenWRT en Huawei hg556a
« Respuesta #469 en: 16-07-2012, 15:30 (Lunes) »
Este firmware debería ser compatible con todos los modelos de HG556a.
https://dl.dropbox.com/u/4708147/openwrt/hw556/openwrt-HW556-squashfs-cfe_r32738.bin

He actualizado los parches SVN: https://dl.dropbox.com/u/4708147/openwrt/hw556/hw556_svn_all.patch
Eeprom que también hay que añadir al SVN: https://dl.dropbox.com/u/4708147/openwrt/hw556/rt3062_eeprom.zip

Espero feedback de todos :3!

Saludos!

A mi no me funciona  :(

Solo consigo conectarme al router configurando la ip manualmente pero aun que se conecte no tengo acceso al router ni por telnet, ssh, luci ni nada. Tampoco tengo ping.

Lo he flasheado desde el bootloader, lo he vuelto a descargar y comparado los md5 por si se habia descargado mal, he repetido el proceso de flasheado 3 veces y nada.

Mi router es ralink, la mac de la pegatina es 04:C0:6F:XX:XX:XX y la del wifi es 6A:C0:6F:XX:XX:XX.

No tengo cable serial asi que no puedo dar mas información.

¿Alguna idea?
Podría ser cuestión de la mac, que no esté en la comprobación de los modelos.

También puede ser cuestión de la configuración: ¿Has flasheado el firmware guardando la configuración a través de LuCI desde el firmware de gmtii o de danitool?, ¿o lo has flasheado a través del cfe, encendiéndolo manteniendo pulsado el botón de reset?

De cualquier forma voy a quitar el panic() que bloquea los routers si no se identifica el hardware para ahorrarnos esto. Protejo los dos últimos megas de la flash para no borrar datos del wifi y fuera. Los routers que no se hayan identificado iniciarán sin wifi en el caso de ser atheros, pero iniciarán, que es lo que importa.

Saludos.

Como ya te he dicho, lo he flasheado desde el bootloader (apagando el router y dejando pulsado reset durante 20 segundos al encenderlo).

Bueno pues ya que tienes identificado el problema, solo me queda esperar la próxima compilación.

Gracias por todo  ;)

La luz cree que viaja más rápido que cualquier otra cosa, pero se equivoca; da lo mismo lo rápido que pueda viajar, porque al final, la luz descubre que la oscuridad ha llegado antes que ella, y la está esperando.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #470 en: 16-07-2012, 16:04 (Lunes) »
Como ya te he dicho, lo he flasheado desde el bootloader (apagando el router y dejando pulsado reset durante 20 segundos al encenderlo).

Bueno pues ya que tienes identificado el problema, solo me queda esperar la próxima compilación.

Gracias por todo  ;)
Pásame el bootlog de este firmware porfa:
https://dl.dropbox.com/u/4708147/openwrt/hw556/openwrt-HW556-squashfs-cfe_r32741.bin

Saludos.

Desconectado geminis_demon

  • Colaborador
  • *
  • Mensajes: 2377
  • Prácticas precisas precisan práctica
Re: OpenWRT en Huawei hg556a
« Respuesta #471 en: 16-07-2012, 17:32 (Lunes) »
Como ya te he dicho, lo he flasheado desde el bootloader (apagando el router y dejando pulsado reset durante 20 segundos al encenderlo).

Bueno pues ya que tienes identificado el problema, solo me queda esperar la próxima compilación.

Gracias por todo  ;)
Pásame el bootlog de este firmware porfa:
https://dl.dropbox.com/u/4708147/openwrt/hw556/openwrt-HW556-squashfs-cfe_r32741.bin

Saludos.

Ahí lo tienes:

[spoiler=dmesg]
[    0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Mon Jul 16 16:01:25 CEST 2012
[    0.000000] Detected Broadcom 0x6358 CPU revision a1
[    0.000000] CPU frequency is 300 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 39 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-49.46
[    0.000000] HW556: Unable to detect board model 0x4c06f. Protecting last 2MB of flash to avoid erasing wlan cal_data.
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW556
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 8029f750, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16256 pages, LIFO batch:3
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:
  • 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61896k/65536k available (2225k kernel code, 3640k reserved, 398k data, 196k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x800ffff]
[    0.108000] pci 0000:00:01.0: [1814:3592] type 0 class 0x000280
[    0.108000] pci 0000:00:01.0: reg 10: [mem 0xffff0000-0xffffffff]
[    0.120000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[    0.124000] Switching to clocksource MIPS
[    0.136000] NET: Registered protocol family 2
[    0.140000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.148000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.156000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.164000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.172000] TCP reno registered
[    0.172000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.188000] NET: Registered protocol family 1
[    0.192000] PCI: CLS 0 bytes, default 16
[    0.196000] audit: initializing netlink socket (disabled)
[    0.200000] type=2000 audit(0.200:1): initialized
[    0.208000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.216000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.224000] msgmni has been set to 120
[    0.228000] io scheduler noop registered
[    0.232000] io scheduler deadline registered (default)
[    0.240000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.248000] console [ttyS0] enabled, bootconsole disabled
[    0.268000] physmap platform flash device: 02000000 at 1e000000
[    0.272000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
[    0.284000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
[    0.284000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.288000]   Amd/Fujitsu Extended Query version 1.3.
[    0.296000] number of CFI chips: 1
[    0.300000] bcm63xxpart: CFE boot tag found with version 8 and board type HW556
[    0.308000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.312000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.320000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ce0000
[    0.328000] bcm63xxpart: Partition 3 is cal_data offset e00000 and length 20000
[    0.336000] bcm63xxpart: Partition 4 is nvram offset fe0000 and length 20000
[    0.344000] bcm63xxpart: Partition 5 is linux offset 20000 and length de0000
[    0.348000] bcm63xxpart: Spare partition is offset 340004 and length abfffc
[    0.356000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.364000] Creating 6 MTD partitions on "physmap-flash.0":
[    0.368000] 0x000000000000-0x000000020000 : "CFE"
[    0.380000] 0x000000020100-0x000000120000 : "kernel"
[    0.384000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.400000] 0x000000120000-0x000000e00000 : "rootfs"
[    0.408000] mtd: partition "rootfs" set to be root filesystem
[    0.416000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=AC0000
[    0.424000] 0x000000340000-0x000000e00000 : "rootfs_data"
[    0.432000] 0x000000e00000-0x000000e20000 : "cal_data"
[    0.444000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.452000] 0x000000020000-0x000000e00000 : "linux"
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.480000] Registered led device: HW556:red:message
[    0.480000] Registered led device: HW556:red:hspa
[    0.480000] Registered led device: HW556:red:dsl
[    0.484000] Registered led device: HW556:red:power
[    0.484000] Registered led device: HW556:red:all
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.232000] eth0: link forced UP - 100/full - flow control off/off
[    3.452000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.516000] There is already a switch registered on the device 'eth0'
[    5.984000] Button Hotplug driver version 0.4.1
[   12.828000] Compat-wireless backport release: compat-wireless-2012-07-03-2-3-g7adf66e
[   12.836000] Backport based on wireless-testing.git master-2012-07-06
[   12.844000] compat.git: wireless-testing.git
[   12.908000] cfg80211: Calling CRDA to update world regulatory domain
[   12.912000] cfg80211: World regulatory domain updated:
[   12.920000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.928000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.936000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.944000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.952000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.960000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.408000] NET: Registered protocol family 10
[   13.860000] SCSI subsystem initialized
[   13.952000] There is already a switch registered on the device 'eth0'
[   14.312000] usbcore: registered new interface driver usbfs
[   14.316000] usbcore: registered new interface driver hub
[   14.324000] usbcore: registered new device driver usb
[   15.472000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.480000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   15.496000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.500000] Registered led device: rt2800pci-phy0::radio
[   15.500000] Registered led device: rt2800pci-phy0::assoc
[   15.500000] Registered led device: rt2800pci-phy0::quality
[   15.848000] PPP generic driver version 2.4.2
[   16.236000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.528000] NET: Registered protocol family 24
[   16.728000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   16.836000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   16.840000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   16.876000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   16.892000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   16.900000] hub 1-0:1.0: USB hub found
[   16.904000] hub 1-0:1.0: 2 ports detected
[   17.084000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   17.880000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   18.300000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   18.408000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   18.412000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   18.420000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   18.488000] hub 2-0:1.0: USB hub found
[   18.492000] hub 2-0:1.0: 1 port detected
[   18.668000] Initializing USB Mass Storage driver...
[   18.672000] usbcore: registered new interface driver usb-storage
[   18.680000] USB Mass Storage support registered.
[   18.716000] usbcore: registered new interface driver ums-alauda
[   18.752000] usbcore: registered new interface driver ums-cypress
[   18.792000] usbcore: registered new interface driver ums-datafab
[   18.828000] usbcore: registered new interface driver ums-freecom
[   18.864000] usbcore: registered new interface driver ums-isd200
[   18.900000] usbcore: registered new interface driver ums-jumpshot
[   18.940000] usbcore: registered new interface driver ums-karma
[   18.976000] usbcore: registered new interface driver ums-sddr09
[   19.012000] usbcore: registered new interface driver ums-sddr55
[   19.052000] usbcore: registered new interface driver ums-usbat
[   19.088000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   26.380000] eth0: link forced UP - 100/full - flow control off/off
[   26.392000] device eth0 entered promiscuous mode
[   26.400000] br-lan: port 1(eth0) entered forwarding state
[   26.404000] br-lan: port 1(eth0) entered forwarding state
[   28.408000] br-lan: port 1(eth0) entered forwarding state
[   47.520000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   47.528000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   47.532000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[  109.468000] JFFS2 notice: (1074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

[/spoiler]

La luz cree que viaja más rápido que cualquier otra cosa, pero se equivoca; da lo mismo lo rápido que pueda viajar, porque al final, la luz descubre que la oscuridad ha llegado antes que ella, y la está esperando.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #472 en: 16-07-2012, 18:04 (Lunes) »
He actualizado los parches del SVN añadiendo soporte a la versión de "geminis_demon" (en el mismo enlace que tiene jar229 en el post principal).

Estoy compilando un nuevo firmware con los cambios. Por cierto, ¿alguien tiene alguna sugerencia de algún paquete a añadir en el firmware a parte de los que ya he comentado que están incluidos?

Saludos.

Ahí lo tienes:

[spoiler=dmesg]
[    0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Mon Jul 16 16:01:25 CEST 2012
[    0.000000] Detected Broadcom 0x6358 CPU revision a1
[    0.000000] CPU frequency is 300 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 39 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 100.48.56-49.46
[    0.000000] HW556: Unable to detect board model 0x4c06f. Protecting last 2MB of flash to avoid erasing wlan cal_data.
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: HW556
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 8029f750, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16256 pages, LIFO batch:3
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:
  • 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61896k/65536k available (2225k kernel code, 3640k reserved, 398k data, 196k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.068000] registering PCI controller with io_map_base unset
[    0.088000] bio: create slab <bio-0> at 0
[    0.096000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.104000] pci_bus 0000:00: root bus resource [io  0x8000000-0x800ffff]
[    0.108000] pci 0000:00:01.0: [1814:3592] type 0 class 0x000280
[    0.108000] pci 0000:00:01.0: reg 10: [mem 0xffff0000-0xffffffff]
[    0.120000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[    0.124000] Switching to clocksource MIPS
[    0.136000] NET: Registered protocol family 2
[    0.140000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.148000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.156000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.164000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.172000] TCP reno registered
[    0.172000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.188000] NET: Registered protocol family 1
[    0.192000] PCI: CLS 0 bytes, default 16
[    0.196000] audit: initializing netlink socket (disabled)
[    0.200000] type=2000 audit(0.200:1): initialized
[    0.208000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.216000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.224000] msgmni has been set to 120
[    0.228000] io scheduler noop registered
[    0.232000] io scheduler deadline registered (default)
[    0.240000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.248000] console [ttyS0] enabled, bootconsole disabled
[    0.268000] physmap platform flash device: 02000000 at 1e000000
[    0.272000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
[    0.284000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
[    0.284000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.288000]   Amd/Fujitsu Extended Query version 1.3.
[    0.296000] number of CFI chips: 1
[    0.300000] bcm63xxpart: CFE boot tag found with version 8 and board type HW556
[    0.308000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.312000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
[    0.320000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ce0000
[    0.328000] bcm63xxpart: Partition 3 is cal_data offset e00000 and length 20000
[    0.336000] bcm63xxpart: Partition 4 is nvram offset fe0000 and length 20000
[    0.344000] bcm63xxpart: Partition 5 is linux offset 20000 and length de0000
[    0.348000] bcm63xxpart: Spare partition is offset 340004 and length abfffc
[    0.356000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.364000] Creating 6 MTD partitions on "physmap-flash.0":
[    0.368000] 0x000000000000-0x000000020000 : "CFE"
[    0.380000] 0x000000020100-0x000000120000 : "kernel"
[    0.384000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.400000] 0x000000120000-0x000000e00000 : "rootfs"
[    0.408000] mtd: partition "rootfs" set to be root filesystem
[    0.416000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=AC0000
[    0.424000] 0x000000340000-0x000000e00000 : "rootfs_data"
[    0.432000] 0x000000e00000-0x000000e20000 : "cal_data"
[    0.444000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.452000] 0x000000020000-0x000000e00000 : "linux"
[    0.472000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.480000] Registered led device: HW556:red:message
[    0.480000] Registered led device: HW556:red:hspa
[    0.480000] Registered led device: HW556:red:dsl
[    0.484000] Registered led device: HW556:red:power
[    0.484000] Registered led device: HW556:red:all
[    0.484000] TCP cubic registered
[    0.488000] NET: Registered protocol family 17
[    0.492000] 8021q: 802.1Q VLAN Support v1.8
[    0.504000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.516000] Freeing unused kernel memory: 196k freed
[    3.232000] eth0: link forced UP - 100/full - flow control off/off
[    3.452000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.516000] There is already a switch registered on the device 'eth0'
[    5.984000] Button Hotplug driver version 0.4.1
[   12.828000] Compat-wireless backport release: compat-wireless-2012-07-03-2-3-g7adf66e
[   12.836000] Backport based on wireless-testing.git master-2012-07-06
[   12.844000] compat.git: wireless-testing.git
[   12.908000] cfg80211: Calling CRDA to update world regulatory domain
[   12.912000] cfg80211: World regulatory domain updated:
[   12.920000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.928000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.936000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.944000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.952000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.960000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.408000] NET: Registered protocol family 10
[   13.860000] SCSI subsystem initialized
[   13.952000] There is already a switch registered on the device 'eth0'
[   14.312000] usbcore: registered new interface driver usbfs
[   14.316000] usbcore: registered new interface driver hub
[   14.324000] usbcore: registered new device driver usb
[   15.472000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.480000] rt2800pci 0000:00:01.0: setting latency timer to 64
[   15.496000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.500000] Registered led device: rt2800pci-phy0::radio
[   15.500000] Registered led device: rt2800pci-phy0::assoc
[   15.500000] Registered led device: rt2800pci-phy0::quality
[   15.848000] PPP generic driver version 2.4.2
[   16.236000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.528000] NET: Registered protocol family 24
[   16.728000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   16.836000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   16.840000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   16.876000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   16.892000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   16.900000] hub 1-0:1.0: USB hub found
[   16.904000] hub 1-0:1.0: 2 ports detected
[   17.084000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[   17.880000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   18.300000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   18.408000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   18.412000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   18.420000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   18.488000] hub 2-0:1.0: USB hub found
[   18.492000] hub 2-0:1.0: 1 port detected
[   18.668000] Initializing USB Mass Storage driver...
[   18.672000] usbcore: registered new interface driver usb-storage
[   18.680000] USB Mass Storage support registered.
[   18.716000] usbcore: registered new interface driver ums-alauda
[   18.752000] usbcore: registered new interface driver ums-cypress
[   18.792000] usbcore: registered new interface driver ums-datafab
[   18.828000] usbcore: registered new interface driver ums-freecom
[   18.864000] usbcore: registered new interface driver ums-isd200
[   18.900000] usbcore: registered new interface driver ums-jumpshot
[   18.940000] usbcore: registered new interface driver ums-karma
[   18.976000] usbcore: registered new interface driver ums-sddr09
[   19.012000] usbcore: registered new interface driver ums-sddr55
[   19.052000] usbcore: registered new interface driver ums-usbat
[   19.088000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[   26.380000] eth0: link forced UP - 100/full - flow control off/off
[   26.392000] device eth0 entered promiscuous mode
[   26.400000] br-lan: port 1(eth0) entered forwarding state
[   26.404000] br-lan: port 1(eth0) entered forwarding state
[   28.408000] br-lan: port 1(eth0) entered forwarding state
[   47.520000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   47.528000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   47.532000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[  109.468000] JFFS2 notice: (1074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

[/spoiler]
Muchas gracias por el bootlog.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #473 en: 16-07-2012, 18:26 (Lunes) »
Actualizado el post principal con el nuevo firmware, y concretando los modelos de router soportados.
Espero que no te importe jar229 :$...

Saludos!

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4604
Re: OpenWRT en Huawei hg556a
« Respuesta #474 en: 16-07-2012, 19:45 (Lunes) »
Actualizado el post principal con el nuevo firmware, y concretando los modelos de router soportados.
Espero que no te importe jar229 :$...

Saludos!

Faltaría más  ;)
Valoraciones positivas en compra/venta:
175 en Htcmania
240 en Har2mano
12 en gsmspain
 ....
 
Mis equipos en venta: https://drive.google.com/open?id=1Zi_bqLSfg_qCT8sx6JhPaWVvSeZXpcka

felixsg

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #475 en: 17-07-2012, 02:24 (Martes) »
A mi no me funciona el wifi, pero no importa
lo que no consigo es instalar el vfat ni siquiera el ext4 para los sistemas
de archivos
Se puede crear un firmware con ellos incluidos?
No puedo montar el pendrive
He intentado configurar samba para instalar la impresora
pero como es una canon es bastante difícil con samba
debería ser fácil pero no.

Bueno gracias por el trabajo que hacen

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #476 en: 17-07-2012, 03:05 (Martes) »
A mi no me funciona el wifi, pero no importa
lo que no consigo es instalar el vfat ni siquiera el ext4 para los sistemas
de archivos
Se puede crear un firmware con ellos incluidos?
No puedo montar el pendrive
He intentado configurar samba para instalar la impresora
pero como es una canon es bastante difícil con samba
debería ser fácil pero no.

Bueno gracias por el trabajo que hacen
¿Me puedes colgar un dmesg del firmware por favor? Asumo que tu dispositivo es un atheros.

dmesg > /www/dmesg.txt
En el navegador http://192.168.1.1/dmesg.txt

Si puedes también colgarme un dmesg del firmware oficial no vendría nada mal...

Saludos.

EDIT: Si estás usando el firmware del primer post, el más actualizado, debería llevar soporte para ext4 y tal...
Sobre lo de samba con impresoras ni idea, porque a parte de samba necesitas también los drivers de la impresora y eso no sé si se puede hacer con openwrt...
« Última modificación: 17-07-2012, 03:07 (Martes) por Noltari »

Desconectado jar229

  • Moderador
  • *
  • Mensajes: 4604
Re: OpenWRT en Huawei hg556a
« Respuesta #477 en: 17-07-2012, 08:02 (Martes) »
Con respecto a la impresora:

Código: [Seleccionar]
opkg install luci-app-p910nd kmod-usb-printer
Citar
Servidor de impresión.

Entre los paquetes que instalamos al inicio, estaba el servidor de impresión. Si lo hicimios de forma correcta, ahora desde LuCi podremos verlo y configurarlo.
La ruta es LuCi/Services/p910nd - Printer Server. Marcamos enable y Bidirectional Mode.

Ahora, para añadir la impresora a un equipo con WindowsXP (con win7 o Linux es muy similar):

Inicio/Configuración/Impresoras y Faxes
Escogemos Agregar impresora. Nos saldrá el asistente, damos a siguiente.
Seleccionamos Impresora Local conectada a este equipo y desmarcamos Detectar e instalar mi impresora Plug & Play automáticamente. Damos a siguiente.
En esta nueva ventana seleccionamos Crear nuevo puerto y escogemos en el tipo de puerto Standar TCP/IP port. Siguiente.
Otra vez siguiente.
En nombre de impresora o direccion ip, ponemos la ip que hayamos asignado al router. Siguiente.
En la nueva ventana, escogemos en Tipo de dispositivo Personalizado y nos aseguramos (pinchando en configuración) que el puerto es el 9100 y que el protocolo esté marcado como sin formato (win7 indicada Raw).
Le damos a finalizar, y ahora escogemos (de entre la inmesa lista) nuestra impresora (marca y modelo).
Por último, podemos imprimir una página de prueba para comprobar el correcto funcionamento

De la wiki de openwrt:

Citar
Troubleshooting

    Problem: Canon printer stops printing after 80-90% of the site and holds paper
    Solution: turn off bidirectional mode

Valoraciones positivas en compra/venta:
175 en Htcmania
240 en Har2mano
12 en gsmspain
 ....
 
Mis equipos en venta: https://drive.google.com/open?id=1Zi_bqLSfg_qCT8sx6JhPaWVvSeZXpcka

flumenhaggen

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #478 en: 17-07-2012, 14:47 (Martes) »
iep

Aquí otro hg556aAtheros_MX29LV128DB_6416f0   que no consigo que funcione con el firmware r32749 (Kernel 3.3.8).

Asumo que es un Atheros_MX29LV128DB_6416f0 porque el chip pone MX29LV128DBT2I-90Q
Usando los cfe con el método de los 20s.

Lo extraño es que el r30964 con kernel 3.0.18 me funciona perfectamente.

No tengo jtag. Pego dmesg DE LA 3.0.12

[spoiler=dmesg de r30964 kernel 3.0.12]
: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61996k/65536k available (2164k kernel code, 3540k reserved, 366k data, 172k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.064000] cal_data0 = 0xffff ≠ 0xa55a, switching athdata address to 0x1EF7E000
[    0.068000] changed ath9k regdomain to 0xff
[    0.072000] registering PCI controller with io_map_base unset
[    0.084000] bio: create slab <bio-0> at 0
[    0.092000] pci 0000:00:01.0: [168c:ff1d] type 0 class 0x000200
[    0.092000] pci 0000:00:01.0: fixup device configuration
[    0.096000] pci-ath9k-fixup: Writing 0x0029168c to register 0x6000
[    0.100000] pci-ath9k-fixup: Writing 0x02800001 to register 0x6008
[    0.104000] pci-ath9k-fixup: Writing 0x2091168c to register 0x602c
[    0.108000] pci-ath9k-fixup: Writing 0x002a168c to register 0x5000
[    0.112000] pci-ath9k-fixup: Writing 0x02800001 to register 0x5008
[    0.116000] pci-ath9k-fixup: Writing 0x2091168c to register 0x502c
[    0.120000] pci-ath9k-fixup: Writing 0x05040cc0 to register 0x5064
[    0.124000] pci-ath9k-fixup: Writing 0x00033811 to register 0x506c
[    0.128000] pci-ath9k-fixup: Writing 0x0040073b to register 0x4004
[    0.132000] pci-ath9k-fixup: Writing 0x00000003 to register 0x4074
[    0.136000] pci-ath9k-fixup: Writing 0x01c20000 to register 0x4000
[    0.140000] pci-ath9k-fixup: Writing 0x00000044 to register 0x6034
[    0.144000] pci-ath9k-fixup: Device vendor 0x168c, id 0x0029
[    0.148000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
[    0.160000] pci 0000:00:01.0: PME# supported from D0 D3hot
[    0.160000] pci 0000:00:01.0: PME# disabled
[    0.164000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[    0.168000] pci 0000:00:01.0: BAR 0: set to [mem 0x30000000-0x3000ffff] (PCI address [0x30000000-0x3000ffff])
[    0.172000] Switching to clocksource MIPS
[    0.184000] NET: Registered protocol family 2
[    0.188000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.196000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.204000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.212000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.220000] TCP reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.228000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.236000] NET: Registered protocol family 1
[    0.240000] PCI: CLS 0 bytes, default 32
[    0.244000] audit: initializing netlink socket (disabled)
[    0.248000] type=2000 audit(0.248:1): initialized
[    0.256000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.264000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.276000] msgmni has been set to 121
[    0.280000] io scheduler noop registered
[    0.284000] io scheduler deadline registered (default)
[    0.288000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.296000] console [ttyS0] enabled, bootconsole disabled
[    0.312000] bcm963xx-flash bcm963xx-flash.0: 0x02000000 at 0x1e000000
[    0.320000] bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227a
[    0.332000] bcm963xx: Found an alias at 0x1000000 for the chip at 0x0
[    0.332000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.336000]   Amd/Fujitsu Extended Query version 1.3.
[    0.340000] number of CFI chips: 1
[    0.344000] bcm963xx_flash: Read Signature value of CFE1CFE1
[    0.352000] bcm963xx-flash bcm963xx-flash.0: CFE bootloader detected
[    0.356000] bcm963xx_flash: CFE boot tag found with version 8 and board type HW556
[    0.364000] bcm963xx_flash: Partition 0 is CFE offset 0 and length 20000
[    0.372000] bcm963xx_flash: Partition 1 is kernel offset 20100 and length fff00
[    0.380000] bcm963xx_flash: Partition 2 is rootfs offset 120000 and length ce0000
[    0.388000] bcm963xx_flash: Partition 3 is ath_data offset e00000 and length 1e0000
[    0.396000] bcm963xx_flash: Partition 4 is nvram offset fe0000 and length 20000
[    0.404000] bcm963xx_flash: Partition 5 is linux offset 20000 and length de0000
[    0.412000] bcm963xx_flash: Spare partition is 580000 offset and length 880000
[    0.416000] Creating 6 MTD partitions on "bcm963xx":
[    0.424000] 0x000000000000-0x000000020000 : "CFE"
[    0.432000] 0x000000020100-0x000000120000 : "kernel"
[    0.436000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.452000] 0x000000120000-0x000000e00000 : "rootfs"
[    0.464000] mtd: partition "rootfs" set to be root filesystem
[    0.468000] mtd: partition "rootfs_data" created automatically, ofs=560000, len=8A0000
[    0.476000] 0x000000560000-0x000000e00000 : "rootfs_data"
[    0.484000] 0x000000e00000-0x000000fe0000 : "ath_data"
[    0.496000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.504000] 0x000000020000-0x000000e00000 : "linux"
[    0.520000] bcm63xx-wdt bcm63xx-wdt.0:  started, timer margin: 30 sec
[    0.528000] Registered led device: message
[    0.528000] Registered led device: hspa
[    0.528000] Registered led device: dsl
[    0.532000] Registered led device: power
[    0.532000] Registered led device: all_leds
[    0.532000] TCP westwood registered
[    0.536000] NET: Registered protocol family 17
[    0.540000] 802.1Q VLAN Support v1.8
[    0.556000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.564000] Freeing unused kernel memory: 172k freed
[    3.844000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.904000] There is already a switch registered on the device 'eth0'
[   13.320000] Compat-wireless backport release: compat-wireless-2012-02-27-1-r30964
[   13.324000] Backport based on wireless-testing.git master-2012-02-27
[   13.388000] cfg80211: Calling CRDA to update world regulatory domain
[   14.092000] cfg80211: World regulatory domain updated:
[   14.096000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.104000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.112000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.120000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.128000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.136000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.472000] SCSI subsystem initialized
[   14.560000] There is already a switch registered on the device 'eth0'
[   14.800000] usbcore: registered new interface driver usbfs
[   14.808000] usbcore: registered new interface driver hub
[   14.816000] usbcore: registered new device driver usb
[   15.836000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.840000] board_bcm963xx: Setting device platform data
[   15.856000] ath: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
[   15.864000] ath: random mac address will be used: 86:9f:0e:fa:9d:06
[   15.872000] ath: EEPROM regdomain: 0xff
[   15.872000] ath: EEPROM indicates we should expect a direct regpair map
[   15.872000] ath: Country alpha2 being used: JP
[   15.872000] ath: Regpair used: 0xff
[   15.884000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.884000] Registered led device: ath9k-phy0
[   15.884000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc02a0000, irq=39
[   15.896000] cfg80211: Calling CRDA for country: JP
[   15.952000] Button Hotplug driver version 0.4.1
[   16.180000] cfg80211: Regulatory domain changed to country: JP
[   16.188000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.196000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.204000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   16.212000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   16.220000] cfg80211:   (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   16.228000] cfg80211:   (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   16.236000] cfg80211:   (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   16.240000] cfg80211:   (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   16.248000] cfg80211:   (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   16.256000] cfg80211:   (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   16.264000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.272000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.280000] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   16.812000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   17.504000] PPP generic driver version 2.4.2
[   17.888000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.156000] NET: Registered protocol family 24
[   18.556000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   18.560000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   18.568000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   18.600000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   18.616000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   18.624000] hub 1-0:1.0: USB hub found
[   18.628000] hub 1-0:1.0: 2 ports detected
[   18.784000] nf_conntrack version 0.5.0 (971 buckets, 3884 max)
[   19.748000] ath_hal: module license 'Proprietary' taints kernel.
[   19.756000] Disabling lock debugging due to kernel taint
[   19.780000] ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
[   20.156000] ath_pci: trunk
[   20.160000] wlan: trunk
[   20.160000] wlan: mac acl policy registered
[   20.168000] ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
[   20.176000] ath_rate_minstrel: look around rate set to 10%
[   20.180000] ath_rate_minstrel: EWMA rolloff level set to 75%
[   20.184000] ath_rate_minstrel: max segment size in the mrr set to 6000 us
[   20.364000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   20.372000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   20.380000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   20.388000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   20.452000] hub 2-0:1.0: USB hub found
[   20.456000] hub 2-0:1.0: 1 port detected
[   20.628000] uhci_hcd: USB Universal Host Controller Interface driver
[   20.824000] usbcore: registered new interface driver usblp
[   20.876000] Initializing USB Mass Storage driver...
[   20.880000] usbcore: registered new interface driver usb-storage
[   20.888000] USB Mass Storage support registered.
[   21.056000] usb 2-1: new full speed USB device number 2 using bcm63xx_ohci
[   21.064000] input: gpio-buttons as /devices/platform/gpio-buttons.0/input/input0
[   21.116000] fuse init (API version 7.16)
[   21.332000] usb 2-1: not running at top speed; connect to a high speed hub
[   21.352000] hub 2-1:1.0: USB hub found
[   21.356000] hub 2-1:1.0: 2 ports detected
[   31.632000] eth0: link forced UP - 100/full - flow control off/off
[   32.136000] device eth0 entered promiscuous mode
[   32.244000] br-lan: port 1(eth0) entering forwarding state
[   32.248000] br-lan: port 1(eth0) entering forwarding state
[   45.788000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   45.800000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   45.804000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[  133.936000] JFFS2 notice: (1077) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  600.708000] br-lan: port 1(eth0) entering forwarding state
[  600.772000] device eth0 left promiscuous mode
[  600.776000] br-lan: port 1(eth0) entering disabled state
[  601.736000] eth0: link forced UP - 100/full - flow control off/off
[  605.148000] eth0: link forced UP - 100/full - flow control off/off
[  605.444000] eth0: link forced UP - 100/full - flow control off/off
[  605.728000] device eth0 entered promiscuous mode
[  605.820000] br-lan: port 1(eth0) entering forwarding state
[  605.828000] br-lan: port 1(eth0) entering forwarding state
[  606.252000] br-lan: port 1(eth0) entering forwarding state
[  606.576000] device eth0 left promiscuous mode
[  606.580000] br-lan: port 1(eth0) entering disabled state
[  606.632000] eth0: link forced UP - 100/full - flow control off/off
[ 1271.636000] device wlan0 entered promiscuous mode
[ 1271.644000] br-lan: port 1(wlan0) entering forwarding state
[ 1271.648000] br-lan: port 1(wlan0) entering forwarding state
[ 1274.024000] device wlan0 left promiscuous mode
[ 1274.028000] br-lan: port 1(wlan0) entering forwarding state
[ 1274.332000] device wlan0 entered promiscuous mode
[ 1274.336000] br-lan: port 1(wlan0) entering forwarding state
[ 1274.344000] br-lan: port 1(wlan0) entering forwarding state
[ 1434.188000] device mon0 entered promiscuous mode
[ 1461.804000] br-lan: port 1(wlan0) entering forwarding state
[ 1461.844000] br-lan: port 1(wlan0) entering forwarding state
[ 1461.848000] br-lan: port 1(wlan0) entering forwarding state
[ 1461.860000] br-lan: port 1(wlan0) entering forwarding state
[ 1461.948000] device wlan0 left promiscuous mode
[ 1461.952000] br-lan: port 1(wlan0) entering disabled state
[ 1469.372000] device wlan0 entered promiscuous mode
[ 1469.528000] br-lan: port 1(wlan0) entering forwarding state
[ 1469.532000] br-lan: port 1(wlan0) entering forwarding state
[ 1470.284000] eth0: link forced UP - 100/full - flow control off/off
[ 1470.828000] eth0: link forced UP - 100/full - flow control off/off
[ 1473.052000] device wlan0 left promiscuous mode
[ 1473.056000] br-lan: port 1(wlan0) entering forwarding state
[ 1478.332000] device wlan0 entered promiscuous mode
[ 1478.340000] br-lan: port 1(wlan0) entering forwarding state
[ 1478.344000] br-lan: port 1(wlan0) entering forwarding state
[ 1481.524000] device wlan0 left promiscuous mode
[ 1481.528000] br-lan: port 1(wlan0) entering forwarding state
[ 1482.388000] device wlan0 entered promiscuous mode
[ 1482.392000] br-lan: port 1(wlan0) entering forwarding state
[ 1482.396000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.396000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.440000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.444000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.456000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.540000] device wlan0 left promiscuous mode
[ 1605.544000] br-lan: port 1(wlan0) entering disabled state
[ 1613.616000] device wlan0 entered promiscuous mode
[ 1613.804000] br-lan: port 1(wlan0) entering forwarding state
[ 1613.808000] br-lan: port 1(wlan0) entering forwarding state
[ 1614.532000] eth0: link forced UP - 100/full - flow control off/off
[ 1615.076000] eth0: link forced UP - 100/full - flow control off/off
[/spoiler]

Muchísimas gracias por lo que estáis haciendo. Algún día quiero ser como vosotros.

Noltari

  • Visitante
Re: OpenWRT en Huawei hg556a
« Respuesta #479 en: 17-07-2012, 15:07 (Martes) »
iep

Aquí otro hg556aAtheros_MX29LV128DB_6416f0   que no consigo que funcione con el firmware r32749 (Kernel 3.3.8).

Asumo que es un Atheros_MX29LV128DB_6416f0 porque el chip pone MX29LV128DBT2I-90Q
Usando los cfe con el método de los 20s.

Lo extraño es que el r30964 con kernel 3.0.18 me funciona perfectamente.

No tengo jtag. Pego dmesg DE LA 3.0.12

[spoiler=dmesg de r30964 kernel 3.0.12]
: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] Memory: 61996k/65536k available (2164k kernel code, 3540k reserved, 366k data, 172k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.052000] NET: Registered protocol family 16
[    0.064000] cal_data0 = 0xffff ≠ 0xa55a, switching athdata address to 0x1EF7E000
[    0.068000] changed ath9k regdomain to 0xff
[    0.072000] registering PCI controller with io_map_base unset
[    0.084000] bio: create slab <bio-0> at 0
[    0.092000] pci 0000:00:01.0: [168c:ff1d] type 0 class 0x000200
[    0.092000] pci 0000:00:01.0: fixup device configuration
[    0.096000] pci-ath9k-fixup: Writing 0x0029168c to register 0x6000
[    0.100000] pci-ath9k-fixup: Writing 0x02800001 to register 0x6008
[    0.104000] pci-ath9k-fixup: Writing 0x2091168c to register 0x602c
[    0.108000] pci-ath9k-fixup: Writing 0x002a168c to register 0x5000
[    0.112000] pci-ath9k-fixup: Writing 0x02800001 to register 0x5008
[    0.116000] pci-ath9k-fixup: Writing 0x2091168c to register 0x502c
[    0.120000] pci-ath9k-fixup: Writing 0x05040cc0 to register 0x5064
[    0.124000] pci-ath9k-fixup: Writing 0x00033811 to register 0x506c
[    0.128000] pci-ath9k-fixup: Writing 0x0040073b to register 0x4004
[    0.132000] pci-ath9k-fixup: Writing 0x00000003 to register 0x4074
[    0.136000] pci-ath9k-fixup: Writing 0x01c20000 to register 0x4000
[    0.140000] pci-ath9k-fixup: Writing 0x00000044 to register 0x6034
[    0.144000] pci-ath9k-fixup: Device vendor 0x168c, id 0x0029
[    0.148000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
[    0.160000] pci 0000:00:01.0: PME# supported from D0 D3hot
[    0.160000] pci 0000:00:01.0: PME# disabled
[    0.164000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[    0.168000] pci 0000:00:01.0: BAR 0: set to [mem 0x30000000-0x3000ffff] (PCI address [0x30000000-0x3000ffff])
[    0.172000] Switching to clocksource MIPS
[    0.184000] NET: Registered protocol family 2
[    0.188000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.196000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.204000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.212000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.220000] TCP reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.228000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.236000] NET: Registered protocol family 1
[    0.240000] PCI: CLS 0 bytes, default 32
[    0.244000] audit: initializing netlink socket (disabled)
[    0.248000] type=2000 audit(0.248:1): initialized
[    0.256000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.264000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.276000] msgmni has been set to 121
[    0.280000] io scheduler noop registered
[    0.284000] io scheduler deadline registered (default)
[    0.288000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.296000] console [ttyS0] enabled, bootconsole disabled
[    0.312000] bcm963xx-flash bcm963xx-flash.0: 0x02000000 at 0x1e000000
[    0.320000] bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227a
[    0.332000] bcm963xx: Found an alias at 0x1000000 for the chip at 0x0
[    0.332000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.336000]   Amd/Fujitsu Extended Query version 1.3.
[    0.340000] number of CFI chips: 1
[    0.344000] bcm963xx_flash: Read Signature value of CFE1CFE1
[    0.352000] bcm963xx-flash bcm963xx-flash.0: CFE bootloader detected
[    0.356000] bcm963xx_flash: CFE boot tag found with version 8 and board type HW556
[    0.364000] bcm963xx_flash: Partition 0 is CFE offset 0 and length 20000
[    0.372000] bcm963xx_flash: Partition 1 is kernel offset 20100 and length fff00
[    0.380000] bcm963xx_flash: Partition 2 is rootfs offset 120000 and length ce0000
[    0.388000] bcm963xx_flash: Partition 3 is ath_data offset e00000 and length 1e0000
[    0.396000] bcm963xx_flash: Partition 4 is nvram offset fe0000 and length 20000
[    0.404000] bcm963xx_flash: Partition 5 is linux offset 20000 and length de0000
[    0.412000] bcm963xx_flash: Spare partition is 580000 offset and length 880000
[    0.416000] Creating 6 MTD partitions on "bcm963xx":
[    0.424000] 0x000000000000-0x000000020000 : "CFE"
[    0.432000] 0x000000020100-0x000000120000 : "kernel"
[    0.436000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.452000] 0x000000120000-0x000000e00000 : "rootfs"
[    0.464000] mtd: partition "rootfs" set to be root filesystem
[    0.468000] mtd: partition "rootfs_data" created automatically, ofs=560000, len=8A0000
[    0.476000] 0x000000560000-0x000000e00000 : "rootfs_data"
[    0.484000] 0x000000e00000-0x000000fe0000 : "ath_data"
[    0.496000] 0x000000fe0000-0x000001000000 : "nvram"
[    0.504000] 0x000000020000-0x000000e00000 : "linux"
[    0.520000] bcm63xx-wdt bcm63xx-wdt.0:  started, timer margin: 30 sec
[    0.528000] Registered led device: message
[    0.528000] Registered led device: hspa
[    0.528000] Registered led device: dsl
[    0.532000] Registered led device: power
[    0.532000] Registered led device: all_leds
[    0.532000] TCP westwood registered
[    0.536000] NET: Registered protocol family 17
[    0.540000] 802.1Q VLAN Support v1.8
[    0.556000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.564000] Freeing unused kernel memory: 172k freed
[    3.844000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
[    4.904000] There is already a switch registered on the device 'eth0'
[   13.320000] Compat-wireless backport release: compat-wireless-2012-02-27-1-r30964
[   13.324000] Backport based on wireless-testing.git master-2012-02-27
[   13.388000] cfg80211: Calling CRDA to update world regulatory domain
[   14.092000] cfg80211: World regulatory domain updated:
[   14.096000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.104000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.112000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.120000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.128000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.136000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.472000] SCSI subsystem initialized
[   14.560000] There is already a switch registered on the device 'eth0'
[   14.800000] usbcore: registered new interface driver usbfs
[   14.808000] usbcore: registered new interface driver hub
[   14.816000] usbcore: registered new device driver usb
[   15.836000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[   15.840000] board_bcm963xx: Setting device platform data
[   15.856000] ath: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
[   15.864000] ath: random mac address will be used: 86:9f:0e:fa:9d:06
[   15.872000] ath: EEPROM regdomain: 0xff
[   15.872000] ath: EEPROM indicates we should expect a direct regpair map
[   15.872000] ath: Country alpha2 being used: JP
[   15.872000] ath: Regpair used: 0xff
[   15.884000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.884000] Registered led device: ath9k-phy0
[   15.884000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc02a0000, irq=39
[   15.896000] cfg80211: Calling CRDA for country: JP
[   15.952000] Button Hotplug driver version 0.4.1
[   16.180000] cfg80211: Regulatory domain changed to country: JP
[   16.188000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.196000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.204000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   16.212000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   16.220000] cfg80211:   (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   16.228000] cfg80211:   (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   16.236000] cfg80211:   (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   16.240000] cfg80211:   (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   16.248000] cfg80211:   (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   16.256000] cfg80211:   (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   16.264000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.272000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.280000] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   16.812000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   17.504000] PPP generic driver version 2.4.2
[   17.888000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.156000] NET: Registered protocol family 24
[   18.556000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   18.560000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[   18.568000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
[   18.600000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
[   18.616000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   18.624000] hub 1-0:1.0: USB hub found
[   18.628000] hub 1-0:1.0: 2 ports detected
[   18.784000] nf_conntrack version 0.5.0 (971 buckets, 3884 max)
[   19.748000] ath_hal: module license 'Proprietary' taints kernel.
[   19.756000] Disabling lock debugging due to kernel taint
[   19.780000] ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
[   20.156000] ath_pci: trunk
[   20.160000] wlan: trunk
[   20.160000] wlan: mac acl policy registered
[   20.168000] ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
[   20.176000] ath_rate_minstrel: look around rate set to 10%
[   20.180000] ath_rate_minstrel: EWMA rolloff level set to 75%
[   20.184000] ath_rate_minstrel: max segment size in the mrr set to 6000 us
[   20.364000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   20.372000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[   20.380000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
[   20.388000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
[   20.452000] hub 2-0:1.0: USB hub found
[   20.456000] hub 2-0:1.0: 1 port detected
[   20.628000] uhci_hcd: USB Universal Host Controller Interface driver
[   20.824000] usbcore: registered new interface driver usblp
[   20.876000] Initializing USB Mass Storage driver...
[   20.880000] usbcore: registered new interface driver usb-storage
[   20.888000] USB Mass Storage support registered.
[   21.056000] usb 2-1: new full speed USB device number 2 using bcm63xx_ohci
[   21.064000] input: gpio-buttons as /devices/platform/gpio-buttons.0/input/input0
[   21.116000] fuse init (API version 7.16)
[   21.332000] usb 2-1: not running at top speed; connect to a high speed hub
[   21.352000] hub 2-1:1.0: USB hub found
[   21.356000] hub 2-1:1.0: 2 ports detected
[   31.632000] eth0: link forced UP - 100/full - flow control off/off
[   32.136000] device eth0 entered promiscuous mode
[   32.244000] br-lan: port 1(eth0) entering forwarding state
[   32.248000] br-lan: port 1(eth0) entering forwarding state
[   45.788000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   45.800000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   45.804000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[  133.936000] JFFS2 notice: (1077) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  600.708000] br-lan: port 1(eth0) entering forwarding state
[  600.772000] device eth0 left promiscuous mode
[  600.776000] br-lan: port 1(eth0) entering disabled state
[  601.736000] eth0: link forced UP - 100/full - flow control off/off
[  605.148000] eth0: link forced UP - 100/full - flow control off/off
[  605.444000] eth0: link forced UP - 100/full - flow control off/off
[  605.728000] device eth0 entered promiscuous mode
[  605.820000] br-lan: port 1(eth0) entering forwarding state
[  605.828000] br-lan: port 1(eth0) entering forwarding state
[  606.252000] br-lan: port 1(eth0) entering forwarding state
[  606.576000] device eth0 left promiscuous mode
[  606.580000] br-lan: port 1(eth0) entering disabled state
[  606.632000] eth0: link forced UP - 100/full - flow control off/off
[ 1271.636000] device wlan0 entered promiscuous mode
[ 1271.644000] br-lan: port 1(wlan0) entering forwarding state
[ 1271.648000] br-lan: port 1(wlan0) entering forwarding state
[ 1274.024000] device wlan0 left promiscuous mode
[ 1274.028000] br-lan: port 1(wlan0) entering forwarding state
[ 1274.332000] device wlan0 entered promiscuous mode
[ 1274.336000] br-lan: port 1(wlan0) entering forwarding state
[ 1274.344000] br-lan: port 1(wlan0) entering forwarding state
[ 1434.188000] device mon0 entered promiscuous mode
[ 1461.804000] br-lan: port 1(wlan0) entering forwarding state
[ 1461.844000] br-lan: port 1(wlan0) entering forwarding state
[ 1461.848000] br-lan: port 1(wlan0) entering forwarding state
[ 1461.860000] br-lan: port 1(wlan0) entering forwarding state
[ 1461.948000] device wlan0 left promiscuous mode
[ 1461.952000] br-lan: port 1(wlan0) entering disabled state
[ 1469.372000] device wlan0 entered promiscuous mode
[ 1469.528000] br-lan: port 1(wlan0) entering forwarding state
[ 1469.532000] br-lan: port 1(wlan0) entering forwarding state
[ 1470.284000] eth0: link forced UP - 100/full - flow control off/off
[ 1470.828000] eth0: link forced UP - 100/full - flow control off/off
[ 1473.052000] device wlan0 left promiscuous mode
[ 1473.056000] br-lan: port 1(wlan0) entering forwarding state
[ 1478.332000] device wlan0 entered promiscuous mode
[ 1478.340000] br-lan: port 1(wlan0) entering forwarding state
[ 1478.344000] br-lan: port 1(wlan0) entering forwarding state
[ 1481.524000] device wlan0 left promiscuous mode
[ 1481.528000] br-lan: port 1(wlan0) entering forwarding state
[ 1482.388000] device wlan0 entered promiscuous mode
[ 1482.392000] br-lan: port 1(wlan0) entering forwarding state
[ 1482.396000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.396000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.440000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.444000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.456000] br-lan: port 1(wlan0) entering forwarding state
[ 1605.540000] device wlan0 left promiscuous mode
[ 1605.544000] br-lan: port 1(wlan0) entering disabled state
[ 1613.616000] device wlan0 entered promiscuous mode
[ 1613.804000] br-lan: port 1(wlan0) entering forwarding state
[ 1613.808000] br-lan: port 1(wlan0) entering forwarding state
[ 1614.532000] eth0: link forced UP - 100/full - flow control off/off
[ 1615.076000] eth0: link forced UP - 100/full - flow control off/off
[/spoiler]

Muchísimas gracias por lo que estáis haciendo. Algún día quiero ser como vosotros.
¿Estás seguro de que con este firmware no arranca?
https://dl.dropbox.com/u/4708147/openwrt/hw556/openwrt-HW556-squashfs-cfe_r32749.bin

Saludos.