Pues nada ninguno de esos componentes te dara 5 voltios.
En mi opinion prueba con 5 voltios externos, si va bien entonces ya te preocupas o de buscarlos internos o bien de añadir un regulador de tension, el LM7805 seria perfecto:
http://artefactos.leame.com/index.php?module=weblogmodule&action=view&id=17&src=@random48e7cdc1a672d
Supongo tu alimentador es como el del ct5365 y da 18 voltios continua en el secundario.
Saludos.
Lo he intentado haciéndolo como me has comentado y nada. No me detecta ningún dispositivo en el dmesg.
Quizás lo esté haciendo mal: He intentando coger sólo de la placa del D+ y el D- y de un cargador usb (comprobados los 5V) he cogido VCC y GND.
Log:
[spoiler]êÒï¶åツ˟¯ûë»»¯âþ
CFE version 1.0.37-102.1-5 for BCM96368 (32bit,SP,BE)
Build Date: Tue Oct 27 19:02:58 CST 2009 (roger@broadcom2.comtrend.com)
Copyright (C) 2000-2008 Broadcom Corporation.
Parallel flash device: name AM29DL800B, id 0x22cb, size 8192KB
######## BCM53115_is_ready:487 ####### ID=0x53115
######## BCM53115_is_ready:491 ####### BCM53115 UP !!!!
CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Boot Address 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.8
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux.elf
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-10) : 96369R-1231N
Number of MAC Addresses (1-32) : 11
Base MAC Address : 38:72:c0:ce:a4:d1
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 111
CFE> web info: Waiting for connection on socket 0.
CFE> r 192.168.1.8:m vmlinux.elf
0x80010000/3972544 0x803d9dc0/151696 Entry at 0x8022bdb0
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x8022bdb0
[ 0.000000] Linux version 3.3.8 (noltari@skynet) (gcc version 4.6.3 20120201
(prerelease) (Linaro GCC 4.6-2012.02) ) #1 Wed Jun 6 23:00:22 CEST 2012
[ 0.000000] Detected Broadcom 0x6369 CPU revision b2
[ 0.000000] CPU frequency is 400 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] registering 38 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 37 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: 1.0.37-102.1
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
[ 0.000000] board_bcm963xx: board name: 96369R-1231N
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 16256
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jff
s2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16
bytes
[ 0.000000] Memory: 60836k/65536k available (2218k kernel code, 4700k reserve
d, 396k data, 1264k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.036000] Mount-cache hash table entries: 512
[ 0.044000] NET: Registered protocol family 16
[ 0.052000] registering PCI controller with io_map_base unset
[ 0.060000] bio: create slab <bio-0> at 0
[ 0.064000] PCI host bridge to bus 0000:00
[ 0.068000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 0.072000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
[ 0.088000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
[ 0.092000] Switching to clocksource MIPS
[ 0.100000] NET: Registered protocol family 2
[ 0.104000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.112000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.116000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.124000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.132000] TCP reno registered
[ 0.136000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.140000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.148000] NET: Registered protocol family 1
[ 2.328000] audit: initializing netlink socket (disabled)
[ 2.332000] type=2000 audit(2.332:1): initialized
[ 2.340000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.344000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY
) (c) 2001-2006 Red Hat, Inc.
[ 2.356000] msgmni has been set to 118
[ 2.360000] io scheduler noop registered
[ 2.364000] io scheduler deadline registered (default)
[ 2.372000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_
uartú+’ršº²‚‚‚êconsole [ttyS0] ena[ 2.568000[ 2.576000] TCP westwood register
ed
[ 2.580000] NET: Registered protocol family 17
[ 2.588000] 8021q: 802.1Q VLAN Support v1.8
[ 2.604000] Freeing unused kernel memory: 1264k freed
awk: /proc/cpuinfo: No such file or directory
[ 3.300000] roboswitch: Probing device eth0: No such device
[ 3.308000] roboswitch: Probing device eth1: No such device
[ 3.312000] roboswitch: Probing device eth2: No such device
[ 3.316000] roboswitch: Probing device eth3: No such device
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 9.032000] There is already a s
witch registered on the device 'eth0'
[ 9.036000] roboswitch: Probing device eth1: No such device
[ 9.044000] roboswitch: Probing device eth2: No such device
[ 9.048000] roboswitch: Probing device eth3: No such device
[ 9.108000] usbcore: registered new interface driver usbfs
[ 9.112000] usbcore: registered new interface driver hub
[ 9.120000] usbcore: registered new device driver usb
[ 9.156000] Button Hotplug driver version 0.4.1
[ 9.192000] PPP generic driver version 2.4.2
[ 9.252000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.388000] NET: Registered protocol family 24
[ 9.428000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.536000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
[ 9.540000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus
number 1
[ 9.572000] bcm63xx_ehci bcm63xx_ehci.0: irq 15, io mem 0xb0001500
[ 9.588000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00
[ 9.592000] hub 1-0:1.0: USB hub found
[ 9.596000] hub 1-0:1.0: 2 ports detected
[ 9.624000] nf_conntrack version 0.5.0 (970 buckets, 3880 max)
[ 9.848000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.912000] hub 1-0:1.0: over-current condition on port 1
[ 9.956000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
[ 9.960000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus
number 2
[ 9.968000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xb0001600
[ 10.036000] hub 2-0:1.0: USB hub found
[ 10.040000] hub 2-0:1.0: 1 port detected
[ 10.060000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/i
nput/input0
[ 10.124000] hub 1-0:1.0: over-current condition on port 2
[/spoiler]