Autor Tema: WRT350nV2 - (orion) ultimo r36140  (Leído 3824 veces)

0 Usuarios y 1 Visitante están viendo este tema.

x_redentor

  • Visitante
WRT350nV2 - (orion) ultimo r36140
« en: 29-03-2013, 14:28 (Viernes) »
 >:( aqui os dejo la ultima compilacion de la rama orion, en el wrt350nv2 no tira el wifi haber si encuentro la solucion.

y con todo esto

nano
luci_ddns,luci_p2pblock,luci_qos
kmod_usb_storage (+extra)
nls-iso8859-1(+15),nls-cp437,nls-cp850
fs-vfat,fs-ntfs
kmod-mmc,kmod-mmc-spi
openssh-sftp-server

 https://mega.co.nz/#!FQ5VTLJb!bvckGG8oX3NwIAxfMbmDRE3WsGBZ4APDeP-DuFueznE




Pteridium

  • Visitante
Re: WRT350nV2 - (orion) ultimo r36140
« Respuesta #1 en: 29-03-2013, 18:58 (Viernes) »
Un muy buen bicho, y con aceleración criptográfica por hardware (Marvell CESA) y gigabit ethernet, además del puerto USB. Para montar una VPN o alguna otra cosa que vaya encriptada y use libopenssl debe ir como un tiro.
En el wiki de este router, además explica unas cuantas cosas más:
http://wiki.openwrt.org/toh/linksys/wrt350nv2

Edito: ¿No se soluciona el problema cambiando la wifi por alguna más común?
« Última modificación: 30-03-2013, 15:33 (Sábado) por Pteridium »

Desconectado sanson

  • Moderador Global
  • *
  • Mensajes: 8393
Re: Re: WRT350nV2 - (orion) ultimo r36140
« Respuesta #2 en: 30-03-2013, 00:23 (Sábado) »
No lo has abierto

Pteridium

  • Visitante
Re: WRT350nV2 - (orion) ultimo r36140
« Respuesta #3 en: 30-03-2013, 12:54 (Sábado) »
Ya está. Soy un poco torpe...  :-[
Por lo menos de los errores se aprende, si es que se quiere aprender.

Noltari

  • Visitante
Re: WRT350nV2 - (orion) ultimo r36140
« Respuesta #4 en: 30-03-2013, 13:03 (Sábado) »
Igual un bootlog venía bien para saber por qué falla el WiFi.

Saludos.

x_redentor

  • Visitante
Re: WRT350nV2 - (orion) ultimo r36140
« Respuesta #5 en: 30-03-2013, 14:58 (Sábado) »
probe eso que pusisteis del echo , pero nada que no tira, pero era de esperar como dige ya se sabia,

lo interesante es la compilacion actualizada a dia de ayer, eso si no espereis que funione el opkg , por que no tiene soporte de openwrt, por seso añadi todo lo que pongo en la lista y luego lo compile actualizado para que lleve lo necesario

x_redentor

  • Visitante
Re: WRT350nV2 - (orion) ultimo r36140
« Respuesta #6 en: 30-03-2013, 15:03 (Sábado) »
BusyBox v1.19.4 (2013-03-29 15:59:01 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r36141)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:~# dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.3.8 (piter@localhost) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Fri Mar 29 16:09:09 CET 2013
[    0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Linksys WRT350N v2
[    0.000000] Clearing invalid memory bank 0KB@0xffffffff
[    0.000000] Clearing invalid memory bank 0KB@0xffffffff
[    0.000000] Clearing invalid memory bank 0KB@0xffffffff
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat c02c01d8, node_mem_map c02e9000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:
  • 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Memory: 32MB = 32MB total
[    0.000000] Memory: 29464k/29464k available, 3304k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc2800000 - 0xff000000   ( 968 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc2000000   (  32 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc028f000   (2588 kB)
[    0.000000]       .init : 0xc028f000 - 0xc02ac000   ( 116 kB)
[    0.000000]       .data : 0xc02ac000 - 0xc02c0880   (  83 kB)
[    0.000000]        .bss : 0xc02c08a4 - 0xc02e8d80   ( 162 kB)
[    0.000000] NR_IRQS:64
[    0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0
[    0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
[   19.900721] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
[   19.960602] pid_max: default: 32768 minimum: 301
[   19.960948] Mount-cache hash table entries: 512
[   19.961597] CPU: Testing write buffer coherency: ok
[   19.962155] Setting up static identity map for 0x1fddd0 - 0x1fde0c
[   19.965071] NET: Registered protocol family 16
[   19.968506] Orion ID: MV88F5181L-Rev-A1. TCLK=166666667.
[   19.969357] initial MPP regs: 00000003 11110010 00000000
[   19.969404]   final MPP regs: 00000003 11110010 00001111
[   19.973101] Applying Orion-1/Orion-NAS PCIe config read transaction workaround
[   19.973609] PCI host bridge to bus 0000:00
[   19.973650] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[   19.973686] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   19.973762] pci 0000:00:00.0: [11ab:5181] type 0 class 0x000580
[   19.973821] pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
[   19.973866] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x01ffffff]
[   19.974004] PCI: bus0: Fast back to back transfers disabled
[   19.975057] PCI host bridge to bus 0000:01
[   19.975099] pci_bus 0000:01: root bus resource [io  0x100000-0x1fffff]
[   19.975135] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[   19.975215] pci 0000:01:00.0: [11ab:5181] type 0 class 0x000580
[   19.975281] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x01ffffff 64bit pref]
[   19.975332] pci 0000:01:00.0: reg 18: [mem 0x10000000-0x1fffffff 64bit pref]
[   19.975382] pci 0000:01:00.0: reg 20: [mem 0xf1000000-0xf10fffff 64bit]
[   19.975428] pci 0000:01:00.0: reg 30: [mem 0xe0000000-0xe7ffffff pref]
[   19.975503] pci 0000:01:00.0: supports D1 D2
[   19.975533] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[   19.975654] PCI: bus1: Fast back to back transfers enabled
[   19.987139] bio: create slab <bio-0> at 0
[   19.992303] Switching to clocksource orion_clocksource
[   19.997603] NET: Registered protocol family 2
[   19.997925] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[   19.998510] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[   19.998593] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[   19.998645] TCP: Hash tables configured (established 1024 bind 1024)
[   19.998672] TCP reno registered
[   19.998707] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   19.998769] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   19.999209] NET: Registered protocol family 1
[   19.999310] PCI: CLS 32 bytes, default 32
[   20.002908] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   20.002944] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[   20.003806] msgmni has been set to 57
[   20.004639] io scheduler noop registered
[   20.004666] io scheduler deadline registered (default)
[   20.005330] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   20.027222] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
[   20.401446] console [ttyS0] enabled
[   20.407864] physmap platform flash device: 00800000 at f4000000
[   20.414128] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000ec Chip ID 0x0000e0
[   20.424359] Amd/Fujitsu Extended Query Table at 0x0040
[   20.429504]   Fixing Samsung's Amd/Fujitsu Extended Query version to 1.0
[   20.436224]   Amd/Fujitsu Extended Query version 1.0.
[   20.441272] physmap-flash.0: Swapping erase regions for top-boot CFI table.
[   20.448253] number of CFI chips: 1
[   20.452962] Creating 7 MTD partitions on "physmap-flash.0":
[   20.458560] 0x000000000000-0x000000100000 : "kernel"
[   20.466034] 0x000000100000-0x000000750000 : "rootfs"
[   20.473523] mtd: partition "rootfs" set to be root filesystem
[   20.479300] mtd: partition "rootfs_data" created automatically, ofs=3E0000, len=370000
[   20.487347] 0x0000003e0000-0x000000750000 : "rootfs_data"
[   20.495259] 0x000000760000-0x0000007a0000 : "lang"
[   20.502610] 0x0000007a0000-0x0000007c0000 : "nvram"
[   20.510097] 0x0000007c0000-0x000000800000 : "u-boot"
[   20.517654] 0x000000750000-0x000000760000 : "eRcOmM_do_not_touch"
[   20.526394] 0x000000000000-0x000000750000 : "image"
[   20.534430] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   20.541644] mv643xx_eth smi: probed
[   20.547245] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:00:00:00:51:81
[   20.557773] Registered led device: wrt350nv2:green:power
[   20.558258] Registered led device: wrt350nv2:green:security
[   20.558760] Registered led device: wrt350nv2:orange:power
[   20.559244] Registered led device: wrt350nv2:green:usb
[   20.559735] Registered led device: wrt350nv2:green:wireless
[   20.562159] TCP cubic registered
[   20.565454] NET: Registered protocol family 17
[   20.570146] Distributed Switch Architecture driver version 0.1
[   20.576184] eth0[0]: detected a Marvell 88E6131 switch
[   20.647769] dsa slave smi: probed
[   20.663888] 8021q: 802.1Q VLAN Support v1.8
[   20.668478] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   20.683153] VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
[   20.690876] Freeing init memory: 116K
[   26.003308] JFFS2 notice: (360) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 9 of xref (0 dead, 0 orphan) found.
[   28.078564] Compat-drivers backport release: compat-drivers-2013-01-21-1
[   28.085323] Backport based on wireless-testing.git master-2013-02-22
[   28.091658] compat.git: wireless-testing.git
[   28.132926] cfg80211: Calling CRDA to update world regulatory domain
[   28.139368] cfg80211: World regulatory domain updated:
[   28.144549] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   28.152759] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.160494] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.168265] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.176039] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.183818] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.845980] SCSI subsystem initialized
[   29.045811] usbcore: registered new interface driver usbfs
[   29.051481] usbcore: registered new interface driver hub
[   29.058684] usbcore: registered new device driver usb
[   29.956278] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   30.359784] PPP generic driver version 2.4.2
[   30.783880] ip_tables: (C) 2000-2006 Netfilter Core Team
[   31.112555] NET: Registered protocol family 24
[   31.277873] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[   32.447858] xt_time: kernel timezone is -0000
[   32.740068] i2c /dev entries driver
[   33.043438] Initializing USB Mass Storage driver...
[   33.048511] usbcore: registered new interface driver usb-storage
[   33.054563] USB Mass Storage support registered.
[   33.081864] usbcore: registered new interface driver ums-alauda
[   33.112930] usbcore: registered new interface driver ums-cypress
[   33.143000] usbcore: registered new interface driver ums-datafab
[   33.172096] usbcore: registered new interface driver ums-freecom
[   33.202168] usbcore: registered new interface driver ums-isd200
[   33.232096] usbcore: registered new interface driver ums-jumpshot
[   33.261489] usbcore: registered new interface driver ums-karma
[   33.291381] usbcore: registered new interface driver ums-sddr09
[   33.321966] usbcore: registered new interface driver ums-sddr55
[   33.352165] usbcore: registered new interface driver ums-usbat
[   33.661403] u32 classifier
[   33.664175]     Performance counters on
[   33.668001]     input device check on
[   33.671655]     Actions configured
[   33.896502] Mirror/redirect action on
[   39.737040] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   39.783124] device lan1 entered promiscuous mode
[   39.787746] device eth0 entered promiscuous mode
[   39.833828] device lan2 entered promiscuous mode
[   40.072508] device lan3 entered promiscuous mode
[   40.081006] lan1: link up, 100 Mb/s, full duplex, flow control disabled
[   40.143208] br-lan: port 1(lan1) entered forwarding state
[   40.148648] br-lan: port 1(lan1) entered forwarding state
[   40.213462] device lan4 entered promiscuous mode
[   40.942958] wan: link up, 1000 Mb/s, full duplex, flow control disabled
[   42.142403] br-lan: port 1(lan1) entered forwarding state
[  106.942691] lan1: link down
[  106.945702] br-lan: port 1(lan1) entered disabled state
[  107.942949] lan1: link up, 100 Mb/s, full duplex, flow control disabled
[  107.963062] br-lan: port 1(lan1) entered forwarding state
[  107.968517] br-lan: port 1(lan1) entered forwarding state

Pteridium

  • Visitante
Re: WRT350nV2 - (orion) ultimo r36140
« Respuesta #7 en: 30-03-2013, 15:37 (Sábado) »
[    0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
[   19.900721] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
[   19.960602] pid_max: default: 32768 minimum: 301

Muy curioso ese salto. ¿Con la última revisión de Attitude Adjustemt ocurre lo mismo con la wifi?

x_redentor

  • Visitante
Re: WRT350nV2 - (orion) ultimo r36140
« Respuesta #8 en: 30-03-2013, 15:44 (Sábado) »
esa es la ultima o penultima