Equipos y materiales > Mikrotik

Manual: balanceo carga PCC con FAILover

<< < (12/12)

petatras:
Balanceo mikrotik failover

 
Hola , necesito ayuda

Estoy intentando configurar un balanceo para que si falla una línea entre en funcionamiento la otra , 1 que es la habitual de un proveedor de cable que me da 15 mb(ADSL1) y otra de teléfonica(ADSL2) que da 3mb y que la tengo por si falla la otra. El problema es que cuando se cae la habitual, no levanta la otra. Necesito ayuda , ya que no lo consigo, he leido con atención el tema, pero nada que no hay manera. Dejo la configuración que tengo por si vieran donde puede estar el fallo y me pudieran ayudar. Muchas gracias
 

-----------------------------------------------------------------------------------------------------
/ip address
add address=192.168.0.3/24 comment="IP wan2" disabled=no \ interface=ether5 network=192.168.0.0
add address=10.222.159.2/30 comment="Ip WAN1" disabled=no \interface=ether1 network=10.222.159.0
add address=192.168.1.1/24 comment="ip LAN" disabled=no \ interface=ether2 network=192.168.1.0
add address=192.168.100.1/24 comment="IP administracion" \ disabled=no interface=ether4 network=192.168.100.0
add address=192.168.1.2/24 disabled=yes interface=wlan1 network=\ 192.168.1.0
----------------------------------------------------------------------------------------------------------
/ip firewall mangle
add action=accept chain=prerouting comment=\ "marcado para balanceo " disabled=no dst-address=\ 10.2.16.0/28 in-interface=bridge1
add action=accept chain=prerouting disabled=no dst-address=\ 192.168.0.0/24 in-interface=bridge1
add action=mark-connection chain=prerouting comment=\"Marcado para balanceo desde bridge" connection-mark=no-mark \ disabled=no in-interface=ether1 new-connection-mark=\ADSL1_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=\ no-mark disabled=no in-interface=ether5 new-connection-mark=\ADSL2_conn passthrough=yes
add action=mark-connection chain=prerouting comment=\ "balanceo ONO" connection-mark=no-mark disabled=no \ dst-address-type=!local in-interface=bridge1 \new-connection-mark=ADSL1_conn passthrough=yes \ per-connection-classifier=both-addresses:2/0
add action=mark-connection chain=prerouting comment=\ "balanceo movistar" connection-mark=no-mark disabled=no \ dst-address-type=!local in-interface=bridge1 \ new-connection-mark=ADSL2_conn passthrough=yes \ per-connection-classifier=both-addresses:2/1
add action=mark-routing chain=prerouting connection-mark=\ ADSL1_conn disabled=no in-interface=bridge1 \ new-routing-mark=to_ether1 passthrough=yes
add action=mark-routing chain=prerouting connection-mark=\ ADSL2_conn disabled=no in-interface=bridge1 \ new-routing-mark=to_ether5 passthrough=yes
add action=mark-routing chain=output connection-mark=\ ADSL1_conn disabled=no new-routing-mark=to_ether1 \ passthrough=yes
add action=mark-routing chain=output connection-mark=ADSL2_conn \ disabled=no new-routing-mark=to_ether5 passthrough=yes

-----------------------------------------------------------------------------------------------------------
/ip firewall nat
add action=masquerade chain=srcnat comment="Ruteo de las wan" \ disabled=no out-interface=ether1
add action=masquerade chain=srcnat disabled=no out-interface=\ ether5
add action=masquerade chain=srcnat disabled=yes out-interface=\ ether1 src-address=192.168.1.0/24
add action=masquerade chain=srcnat disabled=yes out-interface=\ ether1 src-address=192.168.100.0/24
----------------------------------------------------------------------------------------------------------
/ip route
add check-gateway=ping comment=\ "Routes para balanceo desde ether2" disabled=no distance=1 \ dst-address=0.0.0.0/0 gateway=10.222.159.1 routing-mark=\ to_ADSL1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=2 dst-address=\ 0.0.0.0/0 gateway=192.168.0.1 routing-mark=to_ADSL2 scope=\ 30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=\ 0.0.0.0/0 gateway=10.222.159.1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=2 dst-address=\ 0.0.0.0/0 gateway=192.168.0.1 scope=30 target-scope=10
------------------------------------------------------------------------------------------------------------

Navegación

[0] Índice de Mensajes

[*] Página Anterior