Seguridad Wireless - Wifi

Suite Seguridad Wireless => Manuales de Wifislax & Wifiway => Mensaje iniciado por: drvalium en 10-03-2008, 22:37 (Lunes)

Título: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 10-03-2008, 22:37 (Lunes)
LINUX
WIFIWAY 1.0beta2 INSTALLATION GUIDE



START LIVECD


- Start the computer using LiveCd, choose Run wifiway and press Enter.

(http://farm3.static.flickr.com/2201/2325135738_e47e37d931_o.png) (http://www.flickr.com/photos/23989035@N07/2325135738/)

- Short after starting the system, it will appear the setup of the time zone where we choose which applies to our country and we press Enter.

(http://farm4.static.flickr.com/3199/2324315459_10cb0cc224_o.png) (http://www.flickr.com/photos/23989035@N07/2324315459/)

- Then it will ask us for our time system, where we will have to choose <Local time> and then press Enter.

(http://farm3.static.flickr.com/2068/2325135812_ec811bfe1a_o.png) (http://www.flickr.com/photos/23989035@N07/2325135812/)

- The next thing we will have to do is choose the language and the type of keyboard that belongs to our country or our region and our key distribution, then press Enter.

(http://farm3.static.flickr.com/2394/2324315533_b09a7dd84a_o.png) (http://www.flickr.com/photos/23989035@N07/2324315533/)

- It will appear the setup confirmation box, we verificate it and we press Enter.

(http://farm4.static.flickr.com/3095/2325135896_5d61ee7fca_o.png) (http://www.flickr.com/photos/23989035@N07/2325135896/)

- Finally we write startx and we press Enter.

(http://farm4.static.flickr.com/3258/2325135922_b38b47cf45_o.png) (http://www.flickr.com/photos/23989035@N07/2325135922/)

- Well, theoretically we have Linux WifiWay 1.0 beta2 running.

(http://farm3.static.flickr.com/2389/2325138180_d657bd1b1d_o.png) (http://www.flickr.com/photos/23989035@N07/2325138180/)



CREATE PARTITIONS


- To install WifiWay we need two partitions, one for the operative system, and the other for the swap exchange file.

- We run the Shell and we write:

Código: [Seleccionar]
cfdisk
- It will appear a window, where we would do the partitions in a very simple way. We will choose the New option.

- For moving through the options, we will use the right and left key of the keyboard, the up and down keys will be used for choosing the partitions.

(http://farm3.static.flickr.com/2081/2324315635_74fdf2d71e_o.png) (http://www.flickr.com/photos/23989035@N07/2324315635/)

- In the next screen we will choose Primary.

(http://farm3.static.flickr.com/2190/2324316293_65170c807f_o.png) (http://www.flickr.com/photos/23989035@N07/2324316293/)

- Now we have to choose size, for one partition of 6gb (this is what I use), we have to choose 5900.00 if your disk has a different size change the value to the correct one, only have in mind that you have to leave 512mb for the swap partition.

(http://farm4.static.flickr.com/3226/2325136678_c56d92da0b_o.png) (http://www.flickr.com/photos/23989035@N07/2325136678/)

- In the next one, we will answer Beginning.

(http://farm3.static.flickr.com/2288/2324316399_51c0dbee78_o.png) (http://www.flickr.com/photos/23989035@N07/2324316399/)

- Now, we choose the line that says Pri/Log Free Space and then New.

(http://farm3.static.flickr.com/2229/2324316443_cdc145361e_o.png) (http://www.flickr.com/photos/23989035@N07/2324316443/)

- We accept all until we arrive here, then we choose Type and we accept it all.

(http://farm3.static.flickr.com/2002/2325136824_c65f88014a_o.png) (http://www.flickr.com/photos/23989035@N07/2325136824/)

- The result should be this, and we should have to use the option Write.

(http://farm3.static.flickr.com/2117/2324316513_68ff1a7527_o.png) (http://www.flickr.com/photos/23989035@N07/2324316513/)

- It will ask us confirmation, we write yes.

(http://farm4.static.flickr.com/3167/2324316565_dd97b67229_o.png) (http://www.flickr.com/photos/23989035@N07/2324316565/)

- Now we choose Quit.

(http://farm3.static.flickr.com/2023/2324316609_605290e76e_o.png) (http://www.flickr.com/photos/23989035@N07/2324316609/)

- And we write:

Código: [Seleccionar]
fdisk -1
(http://farm3.static.flickr.com/2057/2325136002_3d820978bb_o.png) (http://www.flickr.com/photos/23989035@N07/2325136002/)

- Finally we has  format to the partitions that we have created, Sda1 and sda2 should be changed for the names that fdisk -l has given us, and without closing the Shell we write this:

- For the partition ext3 of the operative sistem:

Código: [Seleccionar]
mkfs –t ext3 /dev/sda1
- For the partition of the swap exchange:

Código: [Seleccionar]
mkswap /dev/sda2
- Reboot and we run again with the LiveCD.



INSTALLATION OF WIFIWAY


- For starting the installation of WifiWay 1.0 beta2 we go to the K/System/Wifiway install menu and we choose Install Wifiway.

(http://farm4.static.flickr.com/3174/2325139234_1c5720803a_o.png) (http://www.flickr.com/photos/23989035@N07/2325139234/)

- Will open an assistant where we have to choose the partition /mnt/sda1, and we leave the default options and we press Copy.

(http://farm3.static.flickr.com/2271/2324315767_d89517d6f6_o.png) (http://www.flickr.com/photos/23989035@N07/2324315767/)

- When you arrive at 100% click Close, already have installed.

(http://farm4.static.flickr.com/3276/2324315785_c4da142fcb_o.png) (http://www.flickr.com/photos/23989035@N07/2324315785/)

- We go to GRUB, firstly we have to setup it. To setup it we enter the K/System/Wifiway install/ Config GRUB menu.

(http://farm3.static.flickr.com/2333/2324319923_059e36b181_o.png) (http://www.flickr.com/photos/23989035@N07/2324319923/)

- A DOS window will open and it will ask us the setup style, and we choose the first one: simple.

(http://farm4.static.flickr.com/3286/2324316651_9236be3386_o.png) (http://www.flickr.com/photos/23989035@N07/2324316651/)

- Then it will ask us for the GRUB screen resolution, and we leave it as it is, and we press OK.

(http://farm4.static.flickr.com/3168/2325137112_0e235232d5_o.png) (http://www.flickr.com/photos/23989035@N07/2325137112/)

- Now it will ask us fot the partition where we want to install the GRUB, and we write /dev/sda1 and we press OK.

(http://farm3.static.flickr.com/2230/2324316787_c86a23580d_o.png) (http://www.flickr.com/photos/23989035@N07/2324316787/)

- Now we will have to choose the type of installation, and we will have to choose the third option MBR and press Ok.

(http://farm3.static.flickr.com/2031/2324316845_606790066c_o.png) (http://www.flickr.com/photos/23989035@N07/2324316845/)

- The next question will be which our principal Hard Disk is, we leave it in blank and we press Ok.

(http://farm3.static.flickr.com/2341/2324316917_41c1599817_o.png) (http://www.flickr.com/photos/23989035@N07/2324316917/)

- When we arrive to the end, we press OK and we close the console.

(http://farm4.static.flickr.com/3041/2324316979_3f5ba226ec_o.png) (http://www.flickr.com/photos/23989035@N07/2324316979/)

- When the setup finishes, we can install the GRUB. For doing it, we go to K/System/Wifiway install/ Install GRUB – MBR menu.

(http://farm4.static.flickr.com/3104/2325141008_ee7bd86a19_o.png) (http://www.flickr.com/photos/23989035@N07/2325141008/)

- We check that in the Partition puts /mnt/sda1 and in Device-MBR puts /dev/sda and we press Aplicar, in just a moment it will appear another window in which we will press Ok.

(http://farm3.static.flickr.com/2342/2325136122_e191c117f4_o.png) (http://www.flickr.com/photos/23989035@N07/2325136122/)

- The last thing we have to do is to edit the menu.lst file, so we enter to the root folder pressing the icon that it’s in the desktop and we go to /mnt/sda1/boot/grub and we search for the menu.lst file and we open it.

- We search for the title wifiway 1.x line and we edit it so it puts title WifiWay 1.0 beta2, this is a change related to the start screen selection aspect.

(http://farm3.static.flickr.com/2188/2324315901_57347407d0_o.png) (http://www.flickr.com/photos/23989035@N07/2324315901/)

- We close KWrite and we save the changes.

(http://farm3.static.flickr.com/2077/2325136228_0ec0fc2727_o.png) (http://www.flickr.com/photos/23989035@N07/2325136228/)

- Installation is complete, turn off WifiWay.

- Started the PC and in a few seconds after, we should see this.

(http://farm3.static.flickr.com/2308/2325136298_34e0b82e4d_o.png) (http://www.flickr.com/photos/23989035@N07/2325136298/)

- After this, where we write startx.

(http://farm4.static.flickr.com/3020/2325136276_403f7597d0_o.png) (http://www.flickr.com/photos/23989035@N07/2325136276/)

Note: because of a bug in the installer, WifiWay will advise us of some warnings. To fix them it’s very easy, immediately after starting it, we open the Shell and we write these commands:

Código: [Seleccionar]
rm /usr/var/run/dbus/pid
Código: [Seleccionar]
rm /usr/var/run/hald/pid
(http://farm3.static.flickr.com/2275/2324316037_03ff348390_o.png) (http://www.flickr.com/photos/23989035@N07/2324316037/)

- Now and in an optional way we will override the Floppy unit.

- In the console that we are running, we write:

Código: [Seleccionar]
kwrite /etc/fstab
(http://farm4.static.flickr.com/3242/2324316075_b54d607391_o.png) (http://www.flickr.com/photos/23989035@N07/2324316075/)

- The fstab file will open and we search for the line where puts:

/dev/fd0 /mnt/floppy vfat noauto, noatime, users, suid, dev,  exec 0 0 # AutoUpdate

(http://farm4.static.flickr.com/3231/2324316233_7642b89687_o.png) (http://www.flickr.com/photos/23989035@N07/2324316233/)

- We edit it for leaving it like this:

#/dev/fd0 /mnt/floppy vfat noauto, noatime, users, suid, dev,  exec 0 0 # AutoUpdate

(http://farm4.static.flickr.com/3034/2324316181_f36bc6b5fb_o.png) (http://www.flickr.com/photos/23989035@N07/2324316181/)

- We close KWrite and we save the changes.

(http://farm3.static.flickr.com/2408/2324316103_cbe4bede81_o.png) (http://www.flickr.com/photos/23989035@N07/2324316103/)

- At the end we write reboot.

(http://farm4.static.flickr.com/3103/2325136476_f2372cf43d_o.png) (http://www.flickr.com/photos/23989035@N07/2325136476/)

- Finally we have WifiWay 1.0 beta2 installed and we can enjoy it.

(http://farm3.static.flickr.com/2192/2325141660_9eb9b8c581_o.png) (http://www.flickr.com/photos/23989035@N07/2325141660/)

Written by drvalium and translated by Lord Ferranator and       
KB-Kurama for https://foro.seguridadwireless.net


Legal notice: the use of this software of wireless analysis must be a basic tool for professionals and individuals who want to know the security level of their Wireless facilities. It’s totally prohibited the use of this software for committing criminal acts of intrusion about the wireless networks of which we are not owners or we haven’t got the necessary permits for analyze the security level. It’s your responsibility to keep the principal idea for which the wireless security was created and the entire environment.


For more information about Linux WifiWay and all the related stuff with the wireless security, you can go to:


http://www.wifiway.org/

http://www.wifiway.org/principal/foro.html

Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 10-03-2008, 23:09 (Lunes)
Buenas

incluso yo que no hablo ingles me parece estar detectando errores en la traducción, por favor si alguien sabe ingles, agradecería ayuda para corregirlo.

gracias y saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: rh3nt0n en 12-03-2008, 13:20 (Miércoles)
Al margen de los posibles errores de traducción, me parece un trabajo excepcional.

Muchas gracias , luego con mas tiempo buscare posibles erratas.
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: chinitiw en 12-03-2008, 14:49 (Miércoles)
drvalium como te dice rh3nt0n por la noche le echaré un ojo y te comento , en ingles es si cabe más impresionante , una vez más grandisimo trabajo ...
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 12-03-2008, 22:59 (Miércoles)
Muchas gracias  :D :D :D

- Si os fijáis en el final del manual veréis que ha sido traducido por Lord Ferranator y KB-Kurama, voy a mirar de que traduzcan también el de la emulación con VMware, acaban de terminar época de exámenes así que de momento les dejo descansar.

- Cuando estemos de acuerdo en que ya esta correcto haré una versión en PDF para que pueda ser descargada.

- Creo que hay un interés especial en lanzar WifiWay a nivel internacional, a ver si esto ayuda.

Siempre un placer escribir para vosotros.

saludos


Título: Re: Manual WifiWay en ingles en construccion
Publicado por: Hwagm en 12-03-2008, 23:06 (Miércoles)
Citar
Creo que hay un interés especial en lanzar WifiWay a nivel internacional, a ver si esto ayuda.

si que lo hay.

Y tengo muy claro que si ayudara, ademas de mas cosas que se estan gestando, zemos un gran comunidad  :-' :-'
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 13-03-2008, 02:27 (Jueves)
buenas

Al final del manual hay dos enlaces ¿son correctos? o ¿mejor estos?

http://www.wifiway.org/

http://www.wifiway.org/principal/foro.html

saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: chinitiw en 13-03-2008, 09:24 (Jueves)
o siento ayer a la noche , no he tenido tiempo de mirarlo, en cuanto tenga menos lio , me lo miro y te comento ...

Saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 13-03-2008, 09:34 (Jueves)
Buenos días ;D

nada de que disculparse, cuando puedes y/o te apetezca.

me voy ha hacer que trabajo ;D

saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: ChimoC en 13-03-2008, 15:22 (Jueves)
Buenas:

Ya estoy yo para dar el coñazo....  ;D .. qué os parece el poner el título del hilo en la lengua del Shakespeare?  ;)

Un saludo

ChimoC

Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 13-03-2008, 20:56 (Jueves)
buenas

no lo he puesto en ingles por que todavía no esta "acabado" y prefiero que los ingleses no lo lean.

cuando este seguro de que la traducción es correcta lo cambiare a la lengua de ese que dices.

pero, que si quieres lo cambio ahora mismo.

saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: ChimoC en 13-03-2008, 21:10 (Jueves)
buenas

no lo he puesto en ingles por que todavía no esta "acabado" y prefiero que los ingleses no lo lean.

cuando este seguro de que la traducción es correcta lo cambiare a la lengua de ese que dices.

pero, que si quieres lo cambio ahora mismo.

saludos

Buenas:

Pues ties razón... dejalo sin traducir hasta el final..no sea que se metan y empiezen a preguntar.... cuando este terminado hacemos lo de siempre... limpieza y cierre de post.  ;)

Un saludo

ChimoC

Título: Re: Manual WifiWay en ingles en construccion
Publicado por: chinitiw en 14-03-2008, 09:42 (Viernes)
Como dice ChimoC yo esperaría y luego limpieza se bloquea y se abre un post nuevo para dudas y comentarios , por otra parte lo del titulo en la lengua del imperio , me parece bien , ya que es en Inglés el titulo del post también

Saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 14-03-2008, 20:39 (Viernes)
buenas

Cita de: chinitiw
me parece bien , ya que es en Inglés el titulo del post también

Si queréis lo pongo en inglés, pero como he dicho antes, creo que todavía no esta preparado para que lo lean los ingleses.

A mi no me cuesta nada cambiarlo, lo único que no quiero es dejar mal a Hwagm por tener demasiadas prisas. No creo que un manual "mal" traducido sea una buena forma de lanzar al mundo WifiWay.

Confío plenamente en la persona que me lo ha traducido, pero estoy buscando una segunda opinión, espero tenerla este fin de semana.

saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: chinitiw en 14-03-2008, 22:03 (Viernes)
estoy completamente de acuerdo con lo que comentas ... por cierto ando algo atrapado y no lo he mirado con calma  :-[ :-[ , pero mañana no curro  por la mañana  :-' :-' :-', en este finde te digo algo.

Saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 14-03-2008, 22:21 (Viernes)
buenas

Cita de: chinitiw
pero mañana no curro  por la mañana   :-'  :-'  :-'

eso me hace pensar que mucho tiempo libre no tienes, no te agobies con el tema, si puedes bien, si no pues te mato y ya está ;)

yo ando persiguiendo a un par que se que hoy empezaban unas mini vacaciones, esta semana no se me escapan. ^-^

saludos


Offtopic
¿por que el emoticono que silva esta menos moreno que los demás? ¿se encuentra bien? a ver si se nos muere de tanto silbar sin coger aire.  ;D
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: hadrianweb en 17-03-2008, 16:19 (Lunes)
jaja, muy bueno el manual, tanto in splanish como en ingles :P

Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 25-03-2008, 17:44 (Martes)
buenas

En un principio creo que ya está, son 4 personas las que están de acuerdo en que la traducción es correcta, así que a menos que queráis repasarlo vosotros solo queda que modifique el titulo y lo lancemos al mundo.

espero que me digáis algo.

saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: Hwagm en 25-03-2008, 17:53 (Martes)
 ;D ;D ;D

no se cuando sacaremos la nueva version, que lleva un instalador nuevo, pero solo sera cambiar 2 0 3 imagenes, lo demas valdra perfectamente.


y ahora que lo pienso añadiria , aunque no es importante, como configurar

(http://farm4.static.flickr.com/3034/2324316181_f36bc6b5fb_o.png)

para las particiones de windows, y para las particiones de swap, y comprobar si estan aqui puestas si el comando swap -a que se usa en el arranque del wifiway es sufciente para montar la memoria swap sin tener que decir que parte del disco es.

Bueno no se si se me entendio mucho, lo que quiero decir, aunque quizas estas 2 cosas ultimas ya las dejaria para cuando salga la wifiway -1.0, que como se probara nuy bien antes, pues aun le queda tiempo por ver la luz, y asi ya podemos lanzar este manual al mundo mundial sin mas preambulos y meterlo en wifiway.org
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 25-03-2008, 18:55 (Martes)
buenas

Citar
para las particiones de windows, y para las particiones de swap, y comprobar si están aquí puestas si el comando swap -a que se usa en el arranque del wifiway es suficiente para montar la memoria swap sin tener que decir que parte del disco es

para las particiones windows no tengo ni idea de que tengo que hacer, la maquina con la que hacia pruebas murió hace poco y emulando no puedo hacer practicas, agradecería instrucciones.

para lo de la partición swap ¿seria suficiente modificando la linea que dice

 /dev/sda2 /mnt/sda2 swap noauto,............ y dejarla así?

 /dev/sda2 /mnt/sda2 swap auto,..........

también necesito saber como compruebo lo del swap -a

Citar
aunque quizás estas 2 cosas ultimas ya las dejaría para cuando salga la wifiway -1.0

mejor lo hacemos ya ¿no? cuando salga la versión definitiva ya reescribiré lo que sea necesario.

gracias
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: Hwagm en 25-03-2008, 19:19 (Martes)
lo del swap -a lo hace ya d forma auto, asi que con poner en el fstab de forma correcta ya deberia valer y en seguida se comprueba, creo que fuiste tu el que dijo que en el boot daba OK pero que luego no estaba, creo recordar

respecto al ntfs, pues hay un readme dentro de /usr/share, pero en seguida de to digo.
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: Hwagm en 25-03-2008, 19:33 (Martes)
/dev/sda1 /mnt/windows ntfs-3g defaults 0 0


lo que pasa es que en la wifiway que tengo ahora actualice el ntfs-3g y no se si funcionara en la beta

si quieres mejro lo dejamos para cuando ya saquemos la nueva version, y el que tienes ahora lo dejas tal cual, como tu quieras
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 25-03-2008, 19:38 (Martes)
Citar
lo del swap -a lo hace ya d forma auto, asi que con poner en el fstab de forma correcta ya deberia valer y en seguida se comprueba,

la forma correcta del fstab ¿es el cambio que te he comentado?

Citar
creo que fuiste tu el que dijo que en el boot daba OK pero que luego no estaba, creo recordar

esto si no recuerdo mal era por culpa del GParted y se soluciono al crear las particiones con cfdisk

Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 26-03-2008, 17:31 (Miércoles)
buenas

tengo dudas con el swap (y con muchas otras cosas jijijijij) ¿significa esto que esta correcto?

(http://farm3.static.flickr.com/2109/2364400114_c37fc19844_o.png) (http://www.flickr.com/photos/23989035@N07/2364400114/)

también tengo un error que dice NVIDIA x driver not found ¿?

saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: Hwagm en 27-03-2008, 00:02 (Jueves)
lo de Nvidia mejor olvidarlo, se quedo por hay alguna cosilla que no puede quitar o se me olvido

el fdisk te dice que hay una particion swap pero no te dice que esta montada

swapon /dev/sda2

swapon /dev/sda2

si te dice Dispositivo o recurso ocupado, es que ya esta ok, pero..................

tambien puede mirar en el menu en "centro de informacion" que tambien en su dia se me olvido de decirtelo, salen cosas de la meoria, y anda que no se nota cuando se activa realmente la swap, sale la total , la que usa, etc, etc

veras que captura mas guapa si puedes verlo, si no lo encuentras en el menu , abre shell y teclea

kinfocenter



Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 27-03-2008, 12:45 (Jueves)
buenas

Con el segundo swapon /dev/sda2, me ha dicho lo del recurso ocupado.

me queda la duda de los enlaces

https://foro.seguridadwireless.net/index.php/topic,10293.msg60606.html#msg60606

con esta ultima duda el manual ya estaria.

- Esta duda ya es interés personal

la Nvidia ¿bastaría con instalar los drivers o la cosa es mas compleja? ¿sucede lo mismo con ATI?, lo pregunto por que miro de activar el soporte 3D en el VMware y necesito que la tarjeta gráfica funcione.

saludos
Título: Re: Manual WifiWay en ingles en construccion
Publicado por: drvalium en 29-03-2008, 17:45 (Sábado)
buenas

para que se monte la partición swap de forma automática he tenido que modificar le archivo fstab y dejarlo asi

/dev/sda2 /mnt/sda2 swap defaults 0 0 # Autoupdate

si no hago esta modificación tengo que montarla con swapon /dev/sda2

por favor ¿me podéis confirmar que he hecho lo correcto?

los links que habia originalmente los he sustituido por estos:

http://www.wifiway.org/

http://www.wifiway.org/principal/foro.html

saludos