Suite Seguridad Wireless > Live wifislax
Wifistation ext no me funciona en wifislax 4.0 (Solucionado)
Celebii:
vale mañana lo hago por la tarde lo hago que dentro de 4h curro y todavia no he dormido el resultado de esos dos comandos lo pongo en este tema o te lo envio por privado?
USUARIONUEVO:
aqui mismo , ;D
es por ver si el firmware esta fallando.
Celebii:
--- Citar ---wifislax ~ # dmesg
[irq 12]
[ 0.878481] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.878584] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.878586] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.878588] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.878589] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.878591] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.878593] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.878595] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.878597] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.878598] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.878600] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[ 0.878664] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.878731] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.878796] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.878876] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.878942] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.879006] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.879072] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.879137] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.879203] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.879268] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.879334] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.880407] pnp 00:0b: [irq 23]
[ 0.880474] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.880495] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 0.880497] pnp 00:0c: [mem 0x40000000-0x401fffff]
[ 0.880573] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.880678] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.880744] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.880762] pnp: PnP ACPI: found 13 devices
[ 0.880843] ACPI: ACPI bus type pnp unregistered
[ 0.880906] PnPBIOS: Disabled by ACPI PNP
[ 0.918800] bcma-pci-bridge 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.918887] bcma-pci-bridge 0000:0d:00.0: setting latency timer to 64
[ 0.918937] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 0.919040] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 0.919179] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 0.928973] bcma: Bus registered
[ 0.929073] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.929155] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.929237] PCI: max bus depth: 1 pci_try_num: 2
[ 0.929277] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref]
[ 0.929355] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.929418] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.929483] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
[ 0.929549] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.929630] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[ 0.929693] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.929767] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
[ 0.929835] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.929918] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[ 0.929982] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.930049] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
[ 0.930117] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.930202] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref]
[ 0.930279] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[ 0.930343] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.930410] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
[ 0.930478] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.930562] pci 0000:00:1c.3: PCI bridge to [bus 19-19]
[ 0.930628] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
[ 0.930709] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.930786] pci 0000:00:01.0: setting latency timer to 64
[ 0.930793] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.930860] pci 0000:00:1c.0: setting latency timer to 64
[ 0.930867] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.930935] pci 0000:00:1c.1: setting latency timer to 64
[ 0.930945] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.931013] pci 0000:00:1c.2: setting latency timer to 64
[ 0.931023] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.931091] pci 0000:00:1c.3: setting latency timer to 64
[ 0.931095] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.931097] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.931099] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.931101] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.931103] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.931105] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff]
[ 0.931107] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.931110] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.931111] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff]
[ 0.931113] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.931115] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.931117] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff]
[ 0.931119] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.931121] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff]
[ 0.931123] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff]
[ 0.931125] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.931128] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff]
[ 0.931146] NET: Registered protocol family 2
[ 0.931228] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.931349] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.931646] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.931816] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.931881] TCP reno registered
[ 0.931940] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.932005] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.932115] NET: Registered protocol family 1
[ 0.932184] pci 0000:00:02.0: Boot video device
[ 0.976383] PCI: CLS 64 bytes, default 64
[ 0.976415] Trying to unpack rootfs image as initramfs...
[ 0.977198] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.978139] Freeing initrd memory: 2028k freed
[ 0.978384] Simple Boot Flag at 0x44 set to 0x1
[ 0.980115] audit: initializing netlink socket (disabled)
[ 0.980184] type=2000 audit(1332796293.729:1): initialized
[ 0.984004] highmem bounce pool size: 64 pages
[ 0.994059] VFS: Disk quotas dquot_6.5.2
[ 0.994197] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.995032] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.995227] fuse init (API version 7.17)
[ 0.995468] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.996023] SGI XFS Quota Management subsystem
[ 0.996232] aufs 3.1-20111114
[ 0.996294] msgmni has been set to 1720
[ 0.996463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.996556] io scheduler noop registered
[ 0.996630] io scheduler cfq registered (default)
[ 0.996910] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.996938] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.997514] intel_idle: MWAIT substates: 0x21120
[ 0.997516] intel_idle: v0.4 model 0x2A
[ 0.997518] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.997736] isapnp: Scanning for PnP cards...
[ 1.355707] isapnp: No Plug & Play device found
[ 1.383696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.462244] brd: module loaded
[ 1.495871] loop: module loaded
[ 1.496429] ahci 0000:00:1f.2: version 3.0
[ 1.496442] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.496551] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.507156] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[ 1.507272] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.507354] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.509965] scsi0 : ahci
[ 1.510137] scsi1 : ahci
[ 1.510280] scsi2 : ahci
[ 1.510424] scsi3 : ahci
[ 1.510565] scsi4 : ahci
[ 1.510706] scsi5 : ahci
[ 1.510890] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 41
[ 1.510970] ata2: DUMMY
[ 1.511027] ata3: DUMMY
[ 1.511083] ata4: DUMMY
[ 1.511154] ata5: DUMMY
[ 1.511212] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 41
[ 1.513795] scsi6 : pata_legacy
[ 1.513927] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 1.815806] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.816280] ata6.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100
[ 1.817598] ata6.00: configured for UDMA/100
[ 1.818805] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.819239] ata1.00: ATA-8: TOSHIBA MK1059GSM, GL002C, max UDMA/100
[ 1.819338] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.819792] ata1.00: configured for UDMA/100
[ 1.819991] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1059GS GL00 PQ: 0 ANSI: 5
[ 1.820249] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.820347] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.820457] sd 0:0:0:0: [sda] Write Protect is off
[ 1.820518] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.820532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.822282] scsi 5:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5
[ 1.827906] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.828029] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.828245] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.978646] Refined TSC clocksource calibration: 2195.012 MHz.
[ 1.978746] Switching to clocksource tsc
[ 2.260176] sda: sda1 sda2 sda3 < sda5 >
[ 2.260649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.261156] scsi7 : pata_legacy
[ 2.261277] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 2.412474] Fusion MPT base driver 3.04.19
[ 2.412536] Copyright (c) 1999-2008 LSI Corporation
[ 2.412601] Fusion MPT SPI Host driver 3.04.19
[ 2.412697] Fusion MPT FC Host driver 3.04.19
[ 2.412792] Fusion MPT SAS Host driver 3.04.19
[ 2.412924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.413003] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.413080] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.413084] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.413153] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.413252] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.417197] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.417211] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000
[ 2.427115] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.427372] hub 1-0:1.0: USB hub found
[ 2.427436] hub 1-0:1.0: 2 ports detected
[ 2.427557] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.427632] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.427636] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.427700] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.427799] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.431737] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.431750] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000
[ 2.441099] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.441341] hub 2-0:1.0: USB hub found
[ 2.441403] hub 2-0:1.0: 2 ports detected
[ 2.441531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.441628] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.441754] xhci_hcd 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.441834] xhci_hcd 0000:19:00.0: setting latency timer to 64
[ 2.441839] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 2.441904] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
[ 2.442181] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000
[ 2.442347] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
[ 2.442356] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
[ 2.442365] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
[ 2.442374] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
[ 2.442383] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
[ 2.442392] xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
[ 2.442401] xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
[ 2.442410] xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
[ 2.442648] xHCI xhci_add_endpoint called for root hub
[ 2.442650] xHCI xhci_check_bandwidth called for root hub
[ 2.442691] hub 3-0:1.0: USB hub found
[ 2.442759] hub 3-0:1.0: 2 ports detected
[ 2.442865] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 2.442930] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4
[ 2.445664] xHCI xhci_add_endpoint called for root hub
[ 2.445666] xHCI xhci_check_bandwidth called for root hub
[ 2.445707] hub 4-0:1.0: USB hub found
[ 2.445775] hub 4-0:1.0: 2 ports detected
[ 2.445932] usbcore: registered new interface driver uas
[ 2.445995] Initializing USB Mass Storage driver...
[ 2.446102] usbcore: registered new interface driver usb-storage
[ 2.446167] USB Mass Storage support registered.
[ 2.446255] usbcore: registered new interface driver ums-alauda
[ 2.446344] usbcore: registered new interface driver ums-cypress
[ 2.446436] usbcore: registered new interface driver ums-datafab
[ 2.446526] usbcore: registered new interface driver ums-freecom
[ 2.446617] usbcore: registered new interface driver ums-isd200
[ 2.446707] usbcore: registered new interface driver ums-jumpshot
[ 2.446797] usbcore: registered new interface driver ums-karma
[ 2.446887] usbcore: registered new interface driver ums-onetouch
[ 2.446978] usbcore: registered new interface driver ums-sddr09
[ 2.447068] usbcore: registered new interface driver ums-sddr55
[ 2.447161] usbcore: registered new interface driver ums-usbat
[ 2.447305] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.454440] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.454526] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.454808] device-mapper: uevent: version 1.0.3
[ 2.454991] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 2.455213] EISA: Probing bus 0 at eisa.0
[ 2.455276] EISA: Cannot allocate resource for mainboard
[ 2.455338] Cannot allocate resource for EISA slot 1
[ 2.455400] Cannot allocate resource for EISA slot 2
[ 2.455461] Cannot allocate resource for EISA slot 3
[ 2.455522] Cannot allocate resource for EISA slot 4
[ 2.455584] Cannot allocate resource for EISA slot 5
[ 2.455646] Cannot allocate resource for EISA slot 6
[ 2.455707] Cannot allocate resource for EISA slot 7
[ 2.455768] Cannot allocate resource for EISA slot 8
[ 2.455829] EISA: Detected 0 cards.
[ 2.456785] cpuidle: using governor ladder
[ 2.458534] cpuidle: using governor menu
[ 2.458698] usbcore: registered new interface driver usbhid
[ 2.458760] usbhid: USB HID core driver
[ 2.458869] TCP cubic registered
[ 2.458911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.459014] NET: Registered protocol family 17
[ 2.459084] Registering the dns_resolver key type
[ 2.459160] Using IPI No-Shortcut mode
[ 2.459364] registered taskstats version 1
[ 2.463513] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.463878] md: Waiting for all devices to be available before autodetect
[ 2.463943] md: If you don't use raid, use raid=noautodetect
[ 2.464346] md: Autodetecting RAID arrays.
[ 2.464407] md: Scanned 0 and added 0 devices.
[ 2.464467] md: autorun ...
[ 2.464524] md: ... autorun DONE.
[ 2.464603] RAMDISK: xz image found at block 0
[ 2.728792] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.753043] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[ 2.753248] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[ 2.753320] VFS: Mounted root (ext4 filesystem) on device 1:0.
[ 2.753481] Freeing unused kernel memory: 468k freed
[ 2.753604] BFS CPU scheduler v0.415 by Con Kolivas.
[ 2.843325] hub 1-1:1.0: USB hub found
[ 2.843476] hub 1-1:1.0: 6 ports detected
[ 2.945542] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 3.060364] hub 2-1:1.0: USB hub found
[ 3.060515] hub 2-1:1.0: 6 ports detected
[ 3.163357] usb 3-1: new full speed USB device number 2 using xhci_hcd
[ 3.295816] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 3.297821] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 3.299817] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
[ 3.347801] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 3.410634] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 3.515979] usb 3-2: new low speed USB device number 3 using xhci_hcd
[ 3.548644] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 3.554648] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
[ 3.555991] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.570832] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1c.3/0000:19:00.0/usb3/3-2/3-2:1.0/input/input1
[ 3.570942] generic-usb 0003:1267:0201.0001: input,hidraw0: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:19:00.0-2/input0
[ 3.634011] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
[ 3.735372] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3.772512] ISO 9660 Extensions: RRIP_1991A
[ 3.793699] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[ 3.980473] usb 2-1.1: new high speed USB device number 3 using ehci_hcd
[ 11.832970] udev[2433]: starting version 165
[ 19.201842] cfg80211: Calling CRDA to update world regulatory domain
[ 21.460293] cfg80211: World regulatory domain updated:
[ 21.460297] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.460300] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[ 22.000862] Bluetooth: Core ver 2.16
[ 22.000883] NET: Registered protocol family 31
[ 22.000886] Bluetooth: HCI device and connection manager initialized
[ 22.000889] Bluetooth: HCI socket layer initialized
[ 22.000891] Bluetooth: L2CAP socket layer initialized
[ 22.000896] Bluetooth: SCO socket layer initialized
[ 22.913279] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.913359] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 23.810799] mousedev: PS/2 mouse device common for all mice
[ 24.307319] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 24.307328] Linux agpgart interface v0.103
[ 26.507066] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 26.507335] Initializing Realtek PCIE storage driver...
[ 26.507378] rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 26.507412] Resource length: 0x1000
[ 26.507425] Original address: 0xc3501000, remapped address: 0xf8ad0000
[ 26.507429] pci->irq = 18
[ 26.507432] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 26.507462] rts_pstor 0000:13:00.0: setting latency timer to 64
[ 26.707619] scsi8 : SCSI emulation for PCI-Express Mass Storage devices
[ 26.707701] rts_pstor: waiting for device to settle before scanning
[ 27.278384] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input2
[ 27.279645] ACPI: Lid Switch [LID]
[ 27.279705] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 27.279760] ACPI: Power Button [PWRB]
[ 27.279824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 27.279871] ACPI: Power Button [PWRF]
[ 27.386400] wmi: Mapper loaded
[ 27.516323] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 27.516350] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 27.516390] r8169 0000:07:00.0: setting latency timer to 64
[ 27.516482] r8169 0000:07:00.0: irq 50 for MSI/MSI-X
[ 27.516626] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xf8c30000, 2c:41:38:5e:7f:76, XID 0c900800 IRQ 50
[ 27.706535] scsi 8:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 27.706788] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 27.706948] Bad LUN (0:1)
[ 27.707014] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 27.707061] Bad target number (1:0)
[ 27.707142] Bad target number (2:0)
[ 27.707219] Bad target number (3:0)
[ 27.707292] Bad target number (4:0)
[ 27.707372] Bad target number (5:0)
[ 27.707461] Bad target number (6:0)
[ 27.707596] Bad target number (7:0)
[ 27.707638] rts_pstor: device scan complete
[ 29.040795] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 29.127102] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 29.128157] ACPI: AC Adapter [AC] (on-line)
[ 29.130447] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 29.130456] ACPI: Battery Slot [BAT0] (battery absent)
[ 29.167673] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 29.167735] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 29.168951] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 29.169330] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 29.283112] rtc_cmos 00:06: RTC can wake from S4
[ 29.283260] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 29.283292] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 29.358969] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 29.359025] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 29.359052] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 30.200930] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 30.256807] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 30.285513] Linux media interface: v0.10
[ 30.450552] sdhci: Secure Digital Host Controller Interface driver
[ 30.450555] sdhci: Copyright(c) Pierre Ossman
[ 30.482546] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 30.484286] hp_accel: laptop model unknown, using default axes configuration
[ 30.484292] sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
[ 30.484314] sdhci-pci 0000:13:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 30.484338] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 30.484348] sdhci-pci 0000:13:00.1: setting latency timer to 64
[ 30.484367] mmc0: no vmmc regulator found
[ 30.484404] Registered led device: mmc0::
[ 30.484506] mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA
[ 30.527752] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[ 30.568219] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
[ 30.568225] b43: probe of bcma0:0 failed with error -95
[ 30.568249] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[ 30.673394] [drm] Initialized drm 1.1.0 20060810
[ 30.697284] lis3lv02d: 8 bits 3DC sensor found
[ 30.713124] Linux video capture interface: v2.00
[ 30.802182] ACPI: acpi_idle yielding to intel_idle
[ 30.815157] thermal LNXTHERM:00: registered as thermal_zone0
[ 30.815160] ACPI: Thermal Zone [THRM] (62 C)
[ 31.338465] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 31.338666] Registered led device: hp::hddprotect
[ 31.338681] hp_accel: driver loaded
[ 31.418109] usb 2-1.1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 31.652626] ath9k_htc 2-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 31.686381] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:d281)
[ 31.689467] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
[ 31.689549] usbcore: registered new interface driver uvcvideo
[ 31.689552] USB Video Class driver (1.1.1)
[ 31.689570] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 31.692605] input: HDA Intel PCH Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 31.692716] input: HDA Intel PCH HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 31.692958] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 31.736834] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 31.736840] i915 0000:00:02.0: setting latency timer to 64
[ 31.748437] mtrr: no more MTRRs available
[ 31.748439] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 31.748660] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 31.748665] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 31.748666] [drm] Driver supports precise vblank timestamp query.
[ 31.749954] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 31.749957] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 31.839811] ath9k_htc 2-1.1:1.0: ath9k_htc: FW Version: 1.3
[ 31.839819] ath: EEPROM regdomain: 0x0
[ 31.839824] ath: EEPROM indicates default country code should be used
[ 31.839828] ath: doing EEPROM country->regdmn map search
[ 31.839833] ath: country maps to regdmn code: 0x3a
[ 31.839838] ath: Country alpha2 being used: US
[ 31.839841] ath: Regpair used: 0x3a
[ 31.842347] cfg80211: Calling CRDA for country: US
[ 31.842357] ieee80211 phy1: Atheros AR9271 Rev:1
[ 31.843195] Registered led device: ath9k_htc-phy1
[ 31.843199] usb 2-1.1: ath9k_htc: USB layer initialized
[ 31.843220] usbcore: registered new interface driver ath9k_htc
[ 31.845593] cfg80211: Regulatory domain changed to country: US
[ 31.845596] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 31.845599] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[ 32.185595] fbcon: inteldrmfb (fb0) is primary device
[ 32.365253] padlock_aes: VIA PadLock not detected.
[ 32.367021] [drm] radeon defaulting to kernel modesetting.
[ 32.367023] [drm] radeon kernel modesetting enabled.
[ 32.367036] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 32.375533] usbcore: registered new interface driver btusb
[ 32.478961] Console: switching to colour frame buffer device 170x48
[ 32.482700] fb0: inteldrmfb frame buffer device
[ 32.482701] drm: registered panic notifier
[ 32.482727] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 32.482735] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.482741] radeon 0000:01:00.0: setting latency timer to 64
[ 32.482873] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 32.602125] acpi device:2f: registered as cooling_device8
[ 32.602401] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input12
[ 32.602490] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 32.709706] acpi device:3c: registered as cooling_device9
[ 32.709993] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 32.710067] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 32.710123] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 32.710355] [drm] initializing kernel modesetting (TURKS 0x1002:0x6740 0x103C:0x3388).
[ 32.710389] [drm] register mmio base: 0xC6500000
[ 32.710390] [drm] register mmio size: 131072
[ 32.710392] vga_switcheroo: enabled
[ 32.710532] radeon atpx: version is 1
[ 35.153151] ATOM BIOS: HP/Flex
[ 35.153191] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 35.153194] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 35.153202] mtrr: no more MTRRs available
[ 35.153204] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 35.153206] [drm] RAM width 128bits DDR
[ 35.153249] [TTM] Zone kernel: Available graphics memory: 440668 kiB.
[ 35.153251] [TTM] Zone highmem: Available graphics memory: 1271264 kiB.
[ 35.153252] [TTM] Initializing pool allocator.
[ 35.153269] [drm] radeon: 2048M of VRAM memory ready
[ 35.153271] [drm] radeon: 512M of GTT memory ready.
[ 35.153285] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 35.153287] [drm] Driver supports precise vblank timestamp query.
[ 35.153338] radeon 0000:01:00.0: irq 53 for MSI/MSI-X
[ 35.153345] radeon 0000:01:00.0: radeon: using MSI.
[ 35.153406] [drm] radeon: irq initialized.
[ 35.153410] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 35.153673] [drm] Loading TURKS Microcode
[ 35.537001] radeon 0000:01:00.0: WB enabled
[ 35.553470] [drm] ring test succeeded in 3 usecs
[ 35.553592] [drm] radeon: ib pool ready.
[ 35.553674] [drm] ib test succeeded in 0 usecs
[ 35.553816] [drm] Radeon Display Connectors
[ 35.553833] [drm] Internal thermal controller with fan control
[ 35.554969] [drm] radeon: power management initialized
[ 35.555174] No connectors reported connected with modes
[ 35.555176] [drm] Cannot find any crtc or sizes - going 1024x768
[ 35.556493] [drm] fb mappable at 0xA0141000
[ 35.556494] [drm] vram apper at 0xA0000000
[ 35.556496] [drm] size 3145728
[ 35.556497] [drm] fb depth is 24
[ 35.556498] [drm] pitch is 4096
[ 35.556577] fb1: radeondrmfb frame buffer device
[ 35.556581] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 1
[ 58.110406] NET: Registered protocol family 10
[ 65.398384] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 70.245442] r8169 0000:07:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[ 70.251508] r8169 0000:07:00.0: eth0: link down
[ 70.251690] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 79.633510] start_kdeinit (3867): /proc/3867/oom_adj is deprecated, please use /proc/3867/oom_score_adj instead.
wifislax ~ #
--- Fin de la cita ---
Decir que el comando modprobe b43 lo introduje pero no salio nada :-\
Si puedo hacer algo mas por ayudaraos decirme lo que sea ;)
USUARIONUEVO:
y aqui lo que necesitaba ,para buscar info ,parece que driver y firmware estan ok , pero esa tarjeta en concreto pone no soportada.
--- Código: ---[ 30.527752] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[ 30.568219] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
[ 30.568225] b43: probe of bcma0:0 failed with error -95
[ 30.568249] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
--- Fin del código ---
Navegación
[*] Página Anterior
Ir a la versión completa