Seguridad Wireless - Wifi

Suite Seguridad Wireless => Live wifislax => Mensaje iniciado por: Garcad en 02-04-2022, 17:00 (Sábado)

Título: Revision modulos wifislax 3.0
Publicado por: Garcad en 02-04-2022, 17:00 (Sábado)
Por cierto , los modulos parecen todo un fracaso ... los que mas llevan solo 2 o 3 descargas , la mayoria estan en 0  ;D

wine tiene 0 pero multilib 3 ..mi no entender esto
audacity 1
social-engineer-toolkit 1

y los diccionarios uno lleva 1 descarga y otro 2 o 3  ;D

Esta claro que a la gente lo que le interesa es la iso sin mas florituras.

Seguro que habrá muchos usuarios que no saben ni que existen.
La descarga de los mismos es una odisea. Página con publicidad nivel dios y captchas hasta en la sopa.
Incluso con jdownloader, es un poco pesadilla descargar los módulos.

Por otro lado ¿ No tenemos versión de Kodi 18.9?

La versión 19.4 se queja por todo y nada funcuona.
Es inútil.
Título: Re:Revision modulos wifislax 3.0
Publicado por: Garcad en 03-04-2022, 19:21 (Domingo)
Que lastima, esperaba respuesta.
Título: Re:Revision modulos wifislax 3.0
Publicado por: Garcad en 03-04-2022, 19:25 (Domingo)
¿Al quien tiene el chchsum de la imagen *.iso y de los modulos extra?

[code][    0.000000] Linux version 5.15.28-wifislax64 (root@wifislax64) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT Fri Mar 11 22:00:25 CET 2022
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8e5efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8e5f000-0x00000000b965ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9660000-0x00000000b96bbfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b96bc000-0x00000000baabbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baabc000-0x00000000bf6befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bfabefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfabf000-0x00000000bfbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire ES1-520/Bellemere_BE, BIOS V1.06 08/11/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1497.286 MHz processor
[    0.012537] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.012546] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.012566] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.013038] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.013515] last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
[    0.024144] found SMP MP-table at [mem 0x000fe270-0x000fe27f]
[    0.024178] Using GB pages for direct mapping
[    0.025408] RAMDISK: [mem 0x7f7f6000-0x7fffefff]
[    0.025419] ACPI: Early table checksum verification disabled
[    0.025431] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.025444] ACPI: XSDT 0x00000000BFBFE120 000094 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.025460] ACPI: FACP 0x00000000BFBFC000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025477] ACPI: DSDT 0x00000000BFBED000 00AF94 (v01 ACRSYS ACRPRDCT F0000000 1025 00040000)
[    0.025489] ACPI: FACS 0x00000000BFB67000 000040
[    0.025499] ACPI: UEFI 0x00000000BFBFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025510] ACPI: HPET 0x00000000BFBFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025521] ACPI: APIC 0x00000000BFBFA000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025532] ACPI: MCFG 0x00000000BFBF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025543] ACPI: ASF! 0x00000000BFBF8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025554] ACPI: BOOT 0x00000000BFBEC000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025565] ACPI: FPDT 0x00000000BFBEA000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025575] ACPI: MSDM 0x00000000BFBE9000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025586] ACPI: SSDT 0x00000000BFBE8000 000B10 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025596] ACPI: SSDT 0x00000000BFBE3000 0046D1 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.025607] ACPI: SSDT 0x00000000BFBE1000 0013CA (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025618] ACPI: SSDT 0x00000000BFBE0000 00008C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025628] ACPI: SSDT 0x00000000BFBDE000 0010C2 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025637] ACPI: Reserving FACP table memory at [mem 0xbfbfc000-0xbfbfc10b]
[    0.025643] ACPI: Reserving DSDT table memory at [mem 0xbfbed000-0xbfbf7f93]
[    0.025648] ACPI: Reserving FACS table memory at [mem 0xbfb67000-0xbfb6703f]
[    0.025652] ACPI: Reserving UEFI table memory at [mem 0xbfbfd000-0xbfbfd235]
[    0.025656] ACPI: Reserving HPET table memory at [mem 0xbfbfb000-0xbfbfb037]
[    0.025660] ACPI: Reserving APIC table memory at [mem 0xbfbfa000-0xbfbfa08f]
[    0.025664] ACPI: Reserving MCFG table memory at [mem 0xbfbf9000-0xbfbf903b]
[    0.025668] ACPI: Reserving ASF! table memory at [mem 0xbfbf8000-0xbfbf80a4]
[    0.025672] ACPI: Reserving BOOT table memory at [mem 0xbfbec000-0xbfbec027]
[    0.025676] ACPI: Reserving FPDT table memory at [mem 0xbfbea000-0xbfbea043]
[    0.025680] ACPI: Reserving MSDM table memory at [mem 0xbfbe9000-0xbfbe9054]
[    0.025684] ACPI: Reserving SSDT table memory at [mem 0xbfbe8000-0xbfbe8b0f]
[    0.025689] ACPI: Reserving SSDT table memory at [mem 0xbfbe3000-0xbfbe76d0]
[    0.025693] ACPI: Reserving SSDT table memory at [mem 0xbfbe1000-0xbfbe23c9]
[    0.025696] ACPI: Reserving SSDT table memory at [mem 0xbfbe0000-0xbfbe008b]
[    0.025701] ACPI: Reserving SSDT table memory at [mem 0xbfbde000-0xbfbdf0c1]
[    0.025791] No NUMA configuration found
[    0.025795] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.025806] NODE_DATA(0) allocated [mem 0x21effb000-0x21effffff]
[    0.025875] Zone ranges:
[    0.025879]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.025885]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.025891]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.025897]   Device   empty
[    0.025901] Movable zone start for each node
[    0.025904] Early memory node ranges
[    0.025906]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.025911]   node   0: [mem 0x0000000000100000-0x00000000b8e5efff]
[    0.025917]   node   0: [mem 0x00000000b9660000-0x00000000b96bbfff]
[    0.025921]   node   0: [mem 0x00000000baabc000-0x00000000bf6befff]
[    0.025925]   node   0: [mem 0x00000000bfbff000-0x00000000bfbfffff]
[    0.025929]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.025935] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.025948] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.026011] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.040255] On node 0, zone DMA32: 2049 pages in unavailable ranges
[    0.040804] On node 0, zone DMA32: 5120 pages in unavailable ranges
[    0.040861] On node 0, zone DMA32: 1344 pages in unavailable ranges
[    0.063158] On node 0, zone Normal: 1024 pages in unavailable ranges
[    0.063302] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.063390] ACPI: PM-Timer IO Port: 0x408
[    0.063408] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.063413] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.063418] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.063421] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.063435] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.063446] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[    0.063454] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.063460] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.063469] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.063474] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.063488] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.063547] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.063554] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.063559] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.063563] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.063570] PM: hibernation: Registered nosave memory: [mem 0xb8e5f000-0xb965ffff]
[    0.063577] PM: hibernation: Registered nosave memory: [mem 0xb96bc000-0xbaabbfff]
[    0.063583] PM: hibernation: Registered nosave memory: [mem 0xbf6bf000-0xbfabefff]
[    0.063587] PM: hibernation: Registered nosave memory: [mem 0xbfabf000-0xbfbbefff]
[    0.063591] PM: hibernation: Registered nosave memory: [mem 0xbfbbf000-0xbfbfefff]
[    0.063597] PM: hibernation: Registered nosave memory: [mem 0xbfc00000-0xdfffffff]
[    0.063601] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.063605] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.063608] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.063612] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.063615] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.063619] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.063622] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.063626] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.063629] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[    0.063633] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.063636] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.063640] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.063645] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.063650] Booting paravirtualized kernel on bare hardware
[    0.063657] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.076644] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.077323] percpu: Embedded 59 pages/cpu s204800 r8192 d28672 u524288
[    0.077360] pcpu-alloc: s204800 r8192 d28672 u524288 alloc=1*2097152
[    0.077368] pcpu-alloc:
[    0.077437] Built 1 zonelists, mobility grouping on.  Total pages: 1921684
[    0.077444] Policy zone: Normal
[    0.077449] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid rw BOOT_IMAGE=/boot/vmlinuz
[    0.077741] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.080136] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.081365] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.081443] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.175630] Memory: 7560872K/7809396K available (16396K kernel code, 2684K rwdata, 5060K rodata, 1776K init, 2980K bss, 248264K reserved, 0K cma-reserved)
[    0.175654] random: get_random_u64 called from __kmem_cache_create+0x28/0x500 with crng_init=0
[    0.176014] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.176046] ftrace: allocating 46791 entries in 183 pages
[    0.213679] ftrace: allocated 183 pages with 6 groups
[    0.213897] rcu: Preemptible hierarchical RCU implementation.
[    0.213901] rcu:    CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.213905] rcu:    RCU dyntick-idle grace-period acceleration is enabled.
[    0.213907] rcu:    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.213912]    Trampoline variant of Tasks RCU enabled.
[    0.213914]    Rude variant of Tasks RCU enabled.
[    0.213917]    Tracing variant of Tasks RCU enabled.
[    0.213920] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.213923] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.216310] NR_IRQS: 16640, nr_irqs: 1000, preallocated irqs: 16
[    0.216778] rcu:    Offload RCU callbacks from CPUs: (none).
[    0.216893] spurious 8259A interrupt: IRQ7.
[    0.218837] Console: colour VGA+ 80x25
[    0.228707] printk: console [tty0] enabled
[    0.228806] ACPI: Core revision 20210730
[    0.229163] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.229257] APIC: Switch to symmetric I/O mode setup
[    0.230078] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.234256] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15951edb53d, max_idle_ns: 440795221240 ns
[    0.234341] Calibrating delay loop (skipped), value calculated using timer frequency.. 2994.57 BogoMIPS (lpj=1497286)
[    0.234413] pid_max: default: 32768 minimum: 301
[    0.234531] LSM: Security Framework initializing
[    0.234656] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.234763] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.235496] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.235554] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.235618] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.235685] Spectre V2 : Mitigation: Retpolines
[    0.235736] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.235801] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.239294] Freeing SMP alternatives memory: 48K
[    0.343409] smpboot: CPU0: AMD A4-5000 APU with Radeon(TM) HD Graphics (family: 0x16, model: 0x0, stepping: 0x1)
[    0.344005] Performance Events: AMD PMU driver.
[    0.344066] ... version:                0
[    0.344119] ... bit width:              48
[    0.344171] ... generic registers:      4
[    0.344222] ... value mask:             0000ffffffffffff
[    0.344276] ... max period:             00007fffffffffff
[    0.344329] ... fixed-purpose events:   0
[    0.344332] ... event mask:             000000000000000f
[    0.344543] rcu: Hierarchical SRCU implementation.
[    0.344883] smp: Bringing up secondary CPUs ...
[    0.345250] x86: Booting SMP configuration:
[    0.345342] .... node  #0, CPUs:      #1
[    0.013533] __common_interrupt: 1.55 No irq handler for vector
[    0.346697]  #2
[    0.013533] __common_interrupt: 2.55 No irq handler for vector
[    0.348699]  #3
[    0.013533] __common_interrupt: 3.55 No irq handler for vector
[    0.350420] smp: Brought up 1 node, 4 CPUs
[    0.350477] smpboot: Max logical packages: 1
[    0.350530] smpboot: Total of 4 processors activated (11978.28 BogoMIPS)
[    0.352443] devtmpfs: initialized
[    0.352524] x86/mm: Memory block size: 128MB
[    0.354922] ACPI: PM: Registering ACPI NVS region [mem 0xbfabf000-0xbfbbefff] (1048576 bytes)
[    0.355423] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.355502] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.355672] pinctrl core: initialized pinctrl subsystem
[    0.356324] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.356704] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.356774] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.356847] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.356929] audit: initializing netlink subsys (disabled)
[    0.357002] audit: type=2000 audit(1649005340.127:1): state=initialized audit_enabled=0 res=1
[    0.357392] thermal_sys: Registered thermal governor 'fair_share'
[    0.357396] thermal_sys: Registered thermal governor 'bang_bang'
[    0.357453] thermal_sys: Registered thermal governor 'step_wise'
[    0.357509] thermal_sys: Registered thermal governor 'user_space'
[    0.357603] cpuidle: using governor ladder
[    0.357603] cpuidle: using governor menu
[    0.357603] Simple Boot Flag at 0x44 set to 0x1
[    0.357603] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.358339] ACPI: bus type PCI registered
[    0.358395] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.358595] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.358672] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.358756] PCI: Using configuration type 1 for base access
[    0.364843] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.364843] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.366377] cryptd: max_cpu_qlen set to 1000
[    0.371445] raid6: skip pq benchmark and using algorithm sse2x4
[    0.371512] raid6: using ssse3x2 recovery algorithm
[    0.372414] ACPI: Added _OSI(Module Device)
[    0.372468] ACPI: Added _OSI(Processor Device)
[    0.372521] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.372573] ACPI: Added _OSI(Processor Aggregator Device)
[    0.372628] ACPI: Added _OSI(Linux-Dell-Video)
[    0.372681] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.372735] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.399131] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.404216] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.410349] ACPI: EC: EC started
[    0.410403] ACPI: EC: interrupt blocked
[    0.422560] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.422619] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[    0.422685] ACPI: Interpreter enabled
[    0.422791] ACPI: PM: (supports S0 S3 S4 S5)
[    0.422845] ACPI: Using IOAPIC for interrupt routing
[    0.423418] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.424087] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.484649] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.484720] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.485008] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.485108] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.485480] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[    0.485953] PCI host bridge to bus 0000:00
[    0.486009] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.486068] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.486126] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.486193] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.486259] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.486324] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.486398] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.486463] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.486528] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.486594] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.486660] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.486725] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.486791] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.486856] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.486921] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.486986] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[    0.487052] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[    0.487118] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.487268] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[    0.487705] pci 0000:00:01.0: [1002:9832] type 00 class 0x030000
[    0.487780] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.487857] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.487929] pci 0000:00:01.0: reg 0x20: [io  0x3000-0x30ff]
[    0.488343] pci 0000:00:01.0: reg 0x24: [mem 0xf0a00000-0xf0a3ffff]
[    0.488406] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.488472] pci 0000:00:01.0: enabling Extended Tags
[    0.488544] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.488650] pci 0000:00:01.0: supports D1 D2
[    0.488704] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.489025] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.489100] pci 0000:00:01.1: reg 0x10: [mem 0xf0a40000-0xf0a43fff 64bit]
[    0.489371] pci 0000:00:01.1: enabling Extended Tags
[    0.489474] pci 0000:00:01.1: supports D1 D2
[    0.489777] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[    0.490164] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[    0.490266] pci 0000:00:02.3: enabling Extended Tags
[    0.490394] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    0.490811] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[    0.490913] pci 0000:00:02.4: enabling Extended Tags
[    0.491022] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.491437] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.491518] pci 0000:00:10.0: reg 0x10: [mem 0xf0a48000-0xf0a49fff 64bit]
[    0.491687] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.492080] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.492152] pci 0000:00:11.0: reg 0x10: [io  0x3118-0x311f]
[    0.492216] pci 0000:00:11.0: reg 0x14: [io  0x3124-0x3127]
[    0.492280] pci 0000:00:11.0: reg 0x18: [io  0x3110-0x3117]
[    0.492344] pci 0000:00:11.0: reg 0x1c: [io  0x3120-0x3123]
[    0.492407] pci 0000:00:11.0: reg 0x20: [io  0x3100-0x310f]
[    0.492471] pci 0000:00:11.0: reg 0x24: [mem 0xf0a4f000-0xf0a4f3ff]
[    0.492583] pci 0000:00:11.0: PME# supported from D3hot
[    0.492954] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.493027] pci 0000:00:12.0: reg 0x10: [mem 0xf0a4e000-0xf0a4efff]
[    0.493452] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.493525] pci 0000:00:12.2: reg 0x10: [mem 0xf0a4d000-0xf0a4d0ff]
[    0.493662] pci 0000:00:12.2: supports D1 D2
[    0.493716] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.494079] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.494151] pci 0000:00:13.0: reg 0x10: [mem 0xf0a4c000-0xf0a4cfff]
[    0.494572] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.494645] pci 0000:00:13.2: reg 0x10: [mem 0xf0a4b000-0xf0a4b0ff]
[    0.494783] pci 0000:00:13.2: supports D1 D2
[    0.494837] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.495198] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.495642] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.495719] pci 0000:00:14.2: reg 0x10: [mem 0xf0a44000-0xf0a47fff 64bit]
[    0.495851] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.496207] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.496564] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[    0.496642] pci 0000:00:14.7: reg 0x10: [mem 0xf0a4a000-0xf0a4a0ff 64bit]
[    0.496970] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[    0.497271] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[    0.497575] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[    0.497875] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[    0.498178] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[    0.498490] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[    0.498845] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.498924] pci 0000:01:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.499008] pci 0000:01:00.0: reg 0x18: [mem 0xf0904000-0xf0904fff 64bit]
[    0.499082] pci 0000:01:00.0: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit]
[    0.499252] pci 0000:01:00.0: supports D1 D2
[    0.499306] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.499567] pci 0000:00:02.3: PCI bridge to [bus 01]
[    0.499629] pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
[    0.499688] pci 0000:00:02.3:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.499875] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[    0.499959] pci 0000:02:00.0: reg 0x10: [mem 0xf0800000-0xf087ffff 64bit]
[    0.500066] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.500208] pci 0000:02:00.0: supports D1 D2
[    0.500263] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.500543] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.500607] pci 0000:00:02.4:   bridge window [mem 0xf0800000-0xf08fffff]
[    0.548142] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.548393] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.548639] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.548884] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.549101] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.549273] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.549452] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.549624] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.550350] ACPI: EC: interrupt unblocked
[    0.550404] ACPI: EC: event unblocked
[    0.550459] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.550512] ACPI: EC: GPE=0x3
[    0.550565] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[    0.550623] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[    0.550806] iommu: Default domain type: Translated
[    0.550806] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.550806] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.550806] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.551338] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.551394] vgaarb: loaded
[    0.551758] SCSI subsystem initialized
[    0.551827] libata version 3.00 loaded.
[    0.551827] ACPI: bus type USB registered
[    0.551827] usbcore: registered new interface driver usbfs
[    0.551827] usbcore: registered new interface driver hub
[    0.551827] usbcore: registered new device driver usb
[    0.551827] pps_core: LinuxPPS API ver. 1 registered
[    0.552337] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.552410] PTP clock support registered
[    0.552503] EDAC MC: Ver: 3.0.0
[    0.553464] PCI: Using ACPI for IRQ routing
[    0.555392] PCI: pci_cache_line_size set to 64 bytes
[    0.555471] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.555476] e820: reserve RAM buffer [mem 0xb8e5f000-0xbbffffff]
[    0.555481] e820: reserve RAM buffer [mem 0xb96bc000-0xbbffffff]
[    0.555485] e820: reserve RAM buffer [mem 0xbf6bf000-0xbfffffff]
[    0.555489] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff]
[    0.555493] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.555507] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.555560] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.557460] clocksource: Switched to clocksource tsc-early
[    0.575642] VFS: Disk quotas dquot_6.6.0
[    0.575752] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.576013] pnp: PnP ACPI init
[    0.576426] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.576489] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.577397] system 00:04: [io  0x0400-0x04cf] has been reserved
[    0.577457] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.577515] system 00:04: [io  0x04d6] has been reserved
[    0.577570] system 00:04: [io  0x0680-0x06ff] has been reserved
[    0.577627] system 00:04: [io  0x077a] has been reserved
[    0.577691] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.577748] system 00:04: [io  0x0c14] has been reserved
[    0.577803] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    0.577859] system 00:04: [io  0x0c6c] has been reserved
[    0.577915] system 00:04: [io  0x0c6f] has been reserved
[    0.577970] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
[    0.578026] system 00:04: [io  0x0840-0x0847] has been reserved
[    0.578278] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.578339] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[    0.625465] pnp: PnP ACPI: found 6 devices
[    0.634564] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.634783] NET: Registered PF_INET protocol family
[    0.635185] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.638170] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.638278] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.638584] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.639080] TCP: Hash tables configured (established 65536 bind 65536)
[    0.639363] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.639502] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.639607] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.639831] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.640297] RPC: Registered named UNIX socket transport module.
[    0.640353] RPC: Registered udp transport module.
[    0.640405] RPC: Registered tcp transport module.
[    0.640457] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.640512] NET: Registered PF_XDP protocol family
[    0.640573] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.640687] pci 0000:00:02.3: PCI bridge to [bus 01]
[    0.640746] pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
[    0.640808] pci 0000:00:02.3:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.640878] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0880000-0xf088ffff pref]
[    0.640947] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.641005] pci 0000:00:02.4:   bridge window [mem 0xf0800000-0xf08fffff]
[    0.641073] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.641130] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.641186] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.641243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.641300] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.641357] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.641413] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.641470] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.641527] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.641584] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.641647] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.641704] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.641761] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.641818] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.641874] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
[    0.641931] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
[    0.641988] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
[    0.642045] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.642100] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
[    0.642157] pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf08fffff]
[    0.642464] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[    0.656793] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x700 took 11762 usecs
[    0.658725] pci 0000:00:12.2: PME# does not work under D3, disabling it
[    0.670789] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x700 took 11716 usecs
[    0.671156] pci 0000:00:13.2: PME# does not work under D3, disabling it
[    0.671274] PCI: CLS 64 bytes, default 64
[    0.671343] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.671403] software IO TLB: mapped [mem 0x00000000bb6bf000-0x00000000bf6bf000] (64MB)
[    0.671603] LVT offset 0 assigned for vector 0x400
[    0.671628] Trying to unpack rootfs image as initramfs...
[    0.671766] perf: AMD IBS detected (0x000000ff)
[    0.671828] amd_uncore: 4  amd_nb counters detected
[    0.671888] amd_uncore: 4  amd_l2 counters detected
[    0.674469] Initialise system trusted keyrings
[    0.674546] Key type blacklist registered
[    0.674700] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.679058] zbud: loaded
[    0.679973] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.680542] NFS: Registering the id_resolver key type
[    0.680608] Key type id_resolver registered
[    0.680673] Key type id_legacy registered
[    0.680777] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.680838] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.680914] ntfs: driver 2.1.32 [Flags: R/W].
[    0.681065] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.681158] fuse: init (API version 7.34)
[    0.711548] xor: automatically using best checksumming function   avx       
[    0.711622] async_tx: api initialized (async)
[    0.711679] Key type asymmetric registered
[    0.711731] Asymmetric key parser 'x509' registered
[    0.711857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.712021] io scheduler mq-deadline registered
[    0.712222] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.713351] ACPI: \_PR_.C000: Found 2 idle states
[    0.713631] ACPI: \_PR_.C001: Found 2 idle states
[    0.713857] ACPI: \_PR_.C002: Found 2 idle states
[    0.714075] ACPI: \_PR_.C003: Found 2 idle states
[    0.718261] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.725164] brd: module loaded
[    0.729085] loop: module loaded
[    0.730094] ahci 0000:00:11.0: version 3.0
[    0.730493] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.730566] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[    0.731064] scsi host0: ahci
[    0.731285] ata1: SATA max UDMA/133 abar m1024@0xf0a4f000 port 0xf0a4f100 irq 28
[    0.733481] scsi host1: pata_legacy
[    0.733616] ata2: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    1.204996] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.524025] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX003J, max UDMA/100
[    1.524470] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.526363] ata1.00: configured for UDMA/100
[    1.526754] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 3J   PQ: 0 ANSI: 5
[    1.527477] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.527546] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.527625] sd 0:0:0:0: [sda] Write Protect is off
[    1.527683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.527731] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.683719]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.693566] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.706089] scsi host1: pata_legacy
[    1.706229] ata3: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    1.733381] tsc: Refined TSC clocksource calibration: 1497.191 MHz
[    1.733463] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1594c522ce2, max_idle_ns: 440795237962 ns
[    1.733590] clocksource: Switched to clocksource tsc
[    1.862362] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.862431] ehci-pci: EHCI PCI platform driver
[    1.862834] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.862982] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.863055] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.863129] ehci-pci 0000:00:12.2: debug port 1
[    1.863250] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0a4d000
[    1.869417] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.869600] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.869670] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.869736] usb usb1: Product: EHCI Host Controller
[    1.869790] usb usb1: Manufacturer: Linux 5.15.28-wifislax64 ehci_hcd
[    1.869846] usb usb1: SerialNumber: 0000:00:12.2
[    1.870192] hub 1-0:1.0: USB hub found
[    1.870265] hub 1-0:1.0: 4 ports detected
[    1.871004] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.871159] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.871229] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.871302] ehci-pci 0000:00:13.2: debug port 1
[    1.871403] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0a4b000
[    1.878357] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.878537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.878607] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.878672] usb usb2: Product: EHCI Host Controller
[    1.878727] usb usb2: Manufacturer: Linux 5.15.28-wifislax64 ehci_hcd
[    1.878782] usb usb2: SerialNumber: 0000:00:13.2
[    1.879161] hub 2-0:1.0: USB hub found
[    1.879232] hub 2-0:1.0: 4 ports detected
[    1.879780] ehci-platform: EHCI generic platform driver
[    1.879871] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.879933] ohci-pci: OHCI PCI platform driver
[    1.880218] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.880395] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.880516] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0a4e000
[    1.936533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    1.936617] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.936683] usb usb3: Product: OHCI PCI host controller
[    1.936738] usb usb3: Manufacturer: Linux 5.15.28-wifislax64 ohci_hcd
[    1.936793] usb usb3: SerialNumber: 0000:00:12.0
[    1.937193] hub 3-0:1.0: USB hub found
[    1.937266] hub 3-0:1.0: 4 ports detected
[    1.938092] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.938258] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.938372] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0a4c000
[    1.994553] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    1.994636] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.994702] usb usb4: Product: OHCI PCI host controller
[    1.994757] usb usb4: Manufacturer: Linux 5.15.28-wifislax64 ohci_hcd
[    1.994813] usb usb4: SerialNumber: 0000:00:13.0
[    1.995255] hub 4-0:1.0: USB hub found
[    1.995329] hub 4-0:1.0: 4 ports detected
[    1.995942] ohci-platform: OHCI generic platform driver
[    1.996026] uhci_hcd: USB Universal Host Controller Interface driver
[    1.996398] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.996577] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[    1.996833] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[    1.997508] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.997577] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.997642] usb usb5: Product: xHCI Host Controller
[    1.997697] usb usb5: Manufacturer: Linux 5.15.28-wifislax64 xhci-hcd
[    1.997752] usb usb5: SerialNumber: 0000:00:10.0
[    1.998067] hub 5-0:1.0: USB hub found
[    1.998139] hub 5-0:1.0: 2 ports detected
[    1.998547] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.998707] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    1.998776] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[    2.000244] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.000479] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    2.000548] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.000613] usb usb6: Product: xHCI Host Controller
[    2.000667] usb usb6: Manufacturer: Linux 5.15.28-wifislax64 xhci-hcd
[    2.000722] usb usb6: SerialNumber: 0000:00:10.0
[    2.001039] hub 6-0:1.0: USB hub found
[    2.001110] hub 6-0:1.0: 2 ports detected
[    2.001633] usbcore: registered new interface driver uas
[    2.001739] usbcore: registered new interface driver usb-storage
[    2.001881] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    2.019745] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.019905] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.020177] mousedev: PS/2 mouse device common for all mice
[    2.020323] rtc_cmos 00:01: RTC can wake from S4
[    2.020750] rtc_cmos 00:01: registered as rtc0
[    2.020842] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    2.021130] device-mapper: uevent: version 1.0.3
[    2.022867] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    2.022966] sdhci: Secure Digital Host Controller Interface driver
[    2.023021] sdhci: Copyright(c) Pierre Ossman
[    2.023123] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[    2.023833] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    2.024026] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.024170] hid: raw HID events driver (C) Jiri Kosina
[    2.024443] usbcore: registered new interface driver usbhid
[    2.024499] usbhid: USB HID core driver
[    2.024891] Initializing XFRM netlink socket
[    2.024954] NET: Registered PF_PACKET protocol family
[    2.025151] Key type dns_resolver registered
[    2.025221] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[    2.025939] microcode: CPU0: patch_level=0x07000106
[    2.026006] microcode: CPU1: patch_level=0x07000106
[    2.026085] microcode: CPU2: patch_level=0x07000106
[    2.026148] microcode: CPU3: patch_level=0x07000106
[    2.026275] microcode: Microcode Update Driver: v2.2.
[    2.026284] IPI shorthand broadcast: enabled
[    2.026411] AVX version of gcm_enc/dec engaged.
[    2.026567] AES CTR mode by8 optimization enabled
[    2.028089] sched_clock: Marking stable (2015537820, 12533706)->(7166227310, -5138155784)
[    2.028508] registered taskstats version 1
[    2.028567] Loading compiled-in X.509 certificates
[    2.028722] zswap: loaded using pool lzo/zbud
[    2.029171] Key type ._fscrypt registered
[    2.029225] Key type .fscrypt registered
[    2.029277] Key type fscrypt-provisioning registered
[    2.031476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.111381] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.119378] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.248938] usb 2-1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    2.249022] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.249080] usb 2-1: Product: USB2.0-CRW
[    2.249134] usb 2-1: Manufacturer: Generic
[    2.249187] usb 2-1: SerialNumber: 20100201396000000
[    2.256558] usb 1-1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.00
[    2.256629] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.256687] usb 1-1: Product: DataTraveler 3.0
[    2.256740] usb 1-1: Manufacturer: Kingston
[    2.256793] usb 1-1: SerialNumber: 60A44C3FAC1CB291296B1D8E
[    2.257851] usb-storage 1-1:1.0: USB Mass Storage device detected
[    2.258277] scsi host1: usb-storage 1-1:1.0
[    2.492986] Freeing initrd memory: 8228K
[    2.498862] Key type encrypted registered
[    2.499260] RAS: Correctable Errors collector initialized.
[    2.502098] Freeing unused decrypted memory: 2036K
[    2.503098] Freeing unused kernel image (initmem) memory: 1776K
[    2.509554] Write protecting the kernel read-only data: 24576k
[    2.510973] Freeing unused kernel image (text/rodata gap) memory: 2032K
[    2.511617] Freeing unused kernel image (rodata/data gap) memory: 1084K
[    2.511685] rodata_test: all tests were successful
[    2.511750] Run /init as init process
[    2.511802]   with arguments:
[    2.511804]     /init
[    2.511806]   with environment:
[    2.511807]     HOME=/
[    2.511809]     TERM=linux
[    2.511810]     kbd=es
[    2.511812]     xkb=es
[    2.511814]     locale=es_ES.utf8
[    2.511815]     tz=Europe/Madrid
[    2.511817]     BOOT_IMAGE=/boot/vmlinuz
[    2.547393] random: udevd: uninitialized urandom read (16 bytes read)
[    2.547564] random: udevd: uninitialized urandom read (16 bytes read)
[    2.547596] random: udevd: uninitialized urandom read (16 bytes read)
[    2.557414] usb 3-2: new low-speed USB device number 2 using ohci-pci
[    2.564645] udevd[215]: starting eudev-3.2.11
[    2.723434] usb 3-2: New USB device found, idVendor=1c4f, idProduct=0054, bcdDevice= 1.10
[    2.723449] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.723454] usb 3-2: Product: Usb Mouse
[    2.723458] usb 3-2: Manufacturer: SIGMACHIP
[    2.731097] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1C4F:0054.0001/input/input2
[    2.731306] hid-generic 0003:1C4F:0054.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:12.0-2/input0
[    3.311439] usb 3-3: new full-speed USB device number 3 using ohci-pci
[    3.468465] usb 3-3: New USB device found, idVendor=0489, idProduct=e078, bcdDevice= 0.01
[    3.468480] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.665729] scsi 1:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    3.668001] sd 1:0:0:0: [sdb] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB)
[    3.670891] sd 1:0:0:0: [sdb] Write Protect is off
[    3.670902] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.673874] sd 1:0:0:0: [sdb] No Caching mode page found
[    3.673880] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[    3.684128]  sdb: sdb1
[    3.684136] random: crng init done
[    3.684142] random: 7 urandom warning(s) missed due to ratelimiting
[    3.691681] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    4.007552] usb 1-4: new high-speed USB device number 5 using ehci-pci
[    4.156692] usb 1-4: New USB device found, idVendor=04f2, idProduct=b47f, bcdDevice=40.51
[    4.156706] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.156711] usb 1-4: Product: VGA Webcam
[    4.156715] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
[    4.156719] usb 1-4: SerialNumber: 0x0001
[    9.503377] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   10.833735] loop0: detected capacity change from 0 to 202112
[   10.865035] loop1: detected capacity change from 0 to 6608
[   10.936462] loop2: detected capacity change from 0 to 392
[   10.965308] loop3: detected capacity change from 0 to 112824
[   10.989277] loop4: detected capacity change from 0 to 9760
[   11.023630] loop5: detected capacity change from 0 to 160528
[   11.060277] loop6: detected capacity change from 0 to 1472
[   11.113787] loop7: detected capacity change from 0 to 30720
[   11.142761] loop8: detected capacity change from 0 to 44560
[   11.177751] loop9: detected capacity change from 0 to 5704
[   11.212282] loop10: detected capacity change from 0 to 60504
[   11.241525] loop11: detected capacity change from 0 to 4968
[   11.277368] loop12: detected capacity change from 0 to 36320
[   11.306638] loop13: detected capacity change from 0 to 52896
[   11.342203] loop14: detected capacity change from 0 to 284616
[   11.378723] loop15: detected capacity change from 0 to 610416
[   11.456015] loop16: detected capacity change from 0 to 250568
[   11.526089] loop17: detected capacity change from 0 to 859392
[   11.590927] loop18: detected capacity change from 0 to 175304
[   11.663211] loop19: detected capacity change from 0 to 7304
[   11.721626] loop20: detected capacity change from 0 to 264568
[   11.754440] loop21: detected capacity change from 0 to 20296
[   11.817990] loop22: detected capacity change from 0 to 625600
[   11.850216] loop23: detected capacity change from 0 to 195488
[   11.910113] loop24: detected capacity change from 0 to 307456
[   11.966054] loop25: detected capacity change from 0 to 9856
[   12.009826] loop26: detected capacity change from 0 to 31384
[   12.069599] loop27: detected capacity change from 0 to 201872
[   12.112874] loop28: detected capacity change from 0 to 42616
[   12.181019] loop29: detected capacity change from 0 to 42456
[   12.217590] loop30: detected capacity change from 0 to 30440
[   12.252388] loop31: detected capacity change from 0 to 648
[   12.288686] loop32: detected capacity change from 0 to 43016
[   12.321588] loop33: detected capacity change from 0 to 29400
[   12.440875] /mnt/media/wifislax64/modules/Modulos/HandBrake-1: Can't open blockdev
[   12.453887] 5: Can't open blockdev
[   12.466869] 1-x86: Can't open blockdev
[   12.479876] 64-1wifislax/HandBrake-1.5.1-x86_64-1wifislax.xzm: Can't open blockdev
[   12.493007] /mnt/media/wifislax64/modules/Modulos/Multilib-wifislax-3: Can't open blockdev
[   12.506099] 0-23-03-2022/Multilib-wifislax-3.0-23-03-2022.xzm: Can't open blockdev
[   12.519104] /mnt/media/wifislax64/modules/Modulos/aMule-2: Can't open blockdev
[   12.532086] 3: Can't open blockdev
[   12.545063] 3-x86: Can't open blockdev
[   12.558089] 64-1slackbuilds/aMule-2.3.3-x86_64-1slackbuilds.xzm: Can't open blockdev
[   12.571107] /mnt/media/wifislax64/modules/Modulos/aegisub-3: Can't open blockdev
[   12.583940] 2: Can't open blockdev
[   12.596749] 2-x86: Can't open blockdev
[   12.609792] 64-2slackbuilds/aegisub-3.2.2-x86_64-2slackbuilds.xzm: Can't open blockdev
[   12.622798] /mnt/media/wifislax64/modules/Modulos/ardour-6: Can't open blockdev
[   12.635790] 9-x86: Can't open blockdev
[   12.648840] 64-1slackbuilds/ardour-6.9-x86_64-1slackbuilds.xzm: Can't open blockdev
[   12.661800] /mnt/media/wifislax64/modules/Modulos/audacity-3: Can't open blockdev
[   12.674971] 1: Can't open blockdev
[   12.697119] 64-2wifislax/audacity-3.1.3-x86_64-2wifislax.xzm: Can't open blockdev
[   12.710269] /mnt/media/wifislax64/modules/Modulos/avidemux-2: Can't open blockdev
[   12.723241] 8: Can't open blockdev
[   12.736168] 0-x86: Can't open blockdev
[   12.749290] 64-1wifislax/avidemux-2.8.0-x86_64-1wifislax.xzm: Can't open blockdev
[   12.762279] /mnt/media/wifislax64/modules/Modulos/burpsuite-2022: Can't open blockdev
[   12.784614] 4-noarch-1wifislax/burpsuite-2022.2.4-noarch-1wifislax.xzm: Can't open blockdev
[   12.797626] /mnt/media/wifislax64/modules/Modulos/ciano-kit-0: Can't open blockdev
[   12.819861] 4-2wifislax/ciano-kit-0.2.4-2wifislax.xzm: Can't open blockdev
[   12.832693] /mnt/media/wifislax64/modules/Modulos/clementine-1: Can't open blockdev
[   12.845697] 4: Can't open blockdev
[   12.858432] 0rc1: Can't open blockdev
[   12.871381] 420: Can't open blockdev
[   12.884347] g596b0a-x86: Can't open blockdev
[   12.897437] 64-1slackbuilds/clementine-1.4.0rc1_420_g596cd9b0a-x86_64-1slackbuilds.xzm: Can't open blockdev
[   12.912364] /mnt/media/wifislax64/modules/Modulos/exaile-4: Can't open blockdev
[   12.943928] 64-1wifislax/exaile-4.1.1-x86_64-1wifislax.xzm: Can't open blockdev
[   12.957091] /mnt/media/wifislax64/modules/Modulos/filezilla-kit-3: Can't open blockdev
[   12.969967] 58: Can't open blockdev
[   12.982905] 0-1wifislax/filezilla-kit-3.58.0-1wifislax.xzm: Can't open blockdev
[   12.995991] /mnt/media/wifislax64/modules/Modulos/firefox-98: Can't open blockdev
[   13.008876] 0: Can't open blockdev
[   13.031309] 64-1wifislax/firefox-98.0.2-x86_64-1wifislax.xzm: Can't open blockdev
[   13.044575] /mnt/media/wifislax64/modules/Modulos/four-in-a-row-3: Can't open blockdev
[   13.057855]
Título: Re:Revision modulos wifislax 3.0
Publicado por: Garcad en 03-04-2022, 21:44 (Domingo)
¿Como puedo solucionar el error siguiente en wpsik?

(http://<a href="https://ibb.co/7vvkc4c"><img src="https://i.ibb.co/CBBPd2d/Screenshot-20220403-193912.png" alt="Screenshot-20220403-193912" border="0"></a>)
(https://i.ibb.co/CBBPd2d/Screenshot-20220403-193912.png) (https://ibb.co/7vvkc4c)

Gracias
Título: Re:Revision modulos wifislax 3.0
Publicado por: USUARIONUEVO en 03-04-2022, 21:46 (Domingo)
garcad , abre un post distinto para hablar de los modulos ,

he bajado por probar el amule , lo he puesto en modules y no he tenido ningun problema ..

¿has cambiado el nombre a los modulos' ...no pueden llevar espacios en el nombre.
Título: Re:Revision modulos wifislax 3.0
Publicado por: USUARIONUEVO en 03-04-2022, 21:48 (Domingo)
respecto a kodi , no tengo la version antigua , la nueva a lo mejor te pide cosas que no estan ... ¿puede ser?

voy a mirar wpsik
Título: Re:Revision modulos wifislax 3.0
Publicado por: USUARIONUEVO en 03-04-2022, 22:04 (Domingo)
respecto a wpsik , a mi me ha pasado lo mismo ....la info de la ayuda es mas bien escasa ...


funciona con la tarjeta en modo monitor ..probado y funcionando bien

wpsik scan -i wlan0mon
Título: Re:Revision modulos wifislax 3.0
Publicado por: Garcad en 03-04-2022, 23:00 (Domingo)
respecto a kodi , no tengo la version antigua , la nueva a lo mejor te pide cosas que no estan ... ¿puede ser?

voy a mirar wpsik

Gracias asi hare.
Título: Re:Revision modulos wifislax 3.0
Publicado por: Garcad en 03-04-2022, 23:01 (Domingo)
respecto a kodi , no tengo la version antigua , la nueva a lo mejor te pide cosas que no estan ... ¿puede ser?

voy a mirar wpsik

Gracias asi hare.

Gracias
Título: Re:Revision modulos wifislax 3.0
Publicado por: Garcad en 03-04-2022, 23:02 (Domingo)
respecto a kodi , no tengo la version antigua , la nueva a lo mejor te pide cosas que no estan ... ¿puede ser?

voy a mirar wpsik

Todos los descargue con jdownloader, mas de una hora delante del pc, para verificar los captcha, copiar y pegar en el usb, desde el explorador por defecto de Linux MInt.

Gracias
Título: Re:Revision modulos wifislax 3.0
Publicado por: Garcad en 04-04-2022, 21:52 (Lunes)
respecto a kodi , no tengo la version antigua , la nueva a lo mejor te pide cosas que no estan ... ¿puede ser?

voy a mirar wpsik

Ya compartiré el método de tener Kodi 18x en cualquier distribución linux.

Kodi 19.4 se lleva muy mal con todo lo que le pongas, error de rutas en todo.

Gracias.
Título: Re:Revision modulos wifislax 3.0
Publicado por: USUARIONUEVO en 04-04-2022, 22:59 (Lunes)
respecto a kodi , no tengo la version antigua , la nueva a lo mejor te pide cosas que no estan ... ¿puede ser?

voy a mirar wpsik

Ya compartiré el método de tener Kodi 18x en cualquier distribución linux.

Kodi 19.4 se lleva muy mal con todo lo que le pongas, error de rutas en todo.

Gracias.

es una version muy nueva y seguramente los plugins no funcionen bien ..a veces es mejor no ir tan a la ultima...la 18.4 recuerdo que no dio ni un solo problema pero ya no la tengo , mirare por los pinchos usb a ver si hay suerte.

un saludo.
Título: Re:Revision modulos wifislax 3.0
Publicado por: pepe10000 en 05-04-2022, 06:29 (Martes)
Hola.

Si la necesitas yo tengo la 17.6 si mal no recuerdo en módulo.

Un saludo.
Título: Re:Revision modulos wifislax 3.0
Publicado por: USUARIONUEVO en 06-04-2022, 13:10 (Miércoles)
Parece que las versiones nuevas no van muy bien , aqui hablan de que han probado hasta versiones dev , y que a la que te descuidas , se cierra solo.

https://www.linuxquestions.org/questions/slackware-14/slackware-15-0-and-kodi-crashing-4175710467/

En cuanto haya arreglo , lo parcheare y resubire.
Título: Re:Revision modulos wifislax 3.0
Publicado por: USUARIONUEVO en 10-04-2022, 18:12 (Domingo)
He subido otra version de kodi ... 18.x   , espero que esa vaya bien.

Yo no tengo ni idea , la abro , e instalo algun plugin tras dar mil vueltas asi que no puedo certificar que funcione bien ,solo puedo decir que al menos no se cierra inesperadamente.
Título: Re:Revision modulos wifislax 3.0
Publicado por: Garcad en 10-04-2022, 21:15 (Domingo)
Gracias voy a ver si la encuentro.
Kodi 18x.

Kodi 19x, no está fino.