Seguridad Wireless - Wifi

Suite Seguridad Wireless => Live wifislax => Mensaje iniciado por: barquerito en 09-01-2015, 19:12 (Viernes)

Título: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 09-01-2015, 19:12 (Viernes)
Hola,

Llevo bastantes días queriendo enviar este post, pero quería confirmar antes el smart
de mi HD (lo tengo en usb externo), pero como no me ha sido posible envío el post:

empiezo: arranco wifislax desde lápiz-usb en un portátil sin disco duro..
y después le conecto un Disco Duro externo USB
maxtor de 230 gigas con 3 particiones: 1 fat32 y 2 ext3

desde que empecé a usar wifislax (4.10) me daba problema en las particiones ext3
(la fat32 no la he probado)..

los sistemas que suelo utilizar (en modo live-usb), pueden ser:
    - Wifislax 4.10
    - Systemrescue
    - Slax 7.0.8

el caso es que después de que wifislax dé mensajes de error en ext3 y se rompa el journaling,
entro con Systemrescue, y reparo las particiones ext3, reinicio
y compruebo el funcionamiento desde Systemrescue: ningún problema, ninguno.

apago, y arranco con Slax 7.0.8 y compruebo a conciencia las particiones ext3 y funcionan sin
ningún problema.

apago y vuelvo a Wifislax 4.10 y al entrar en las particiones ext3 empieza a darme mensajes en dmesg
además que el sistema se pone en sólo lectura.......,,    esto me obliga a volver al Systemrescue y reparar las particiones...
después hago un análisis de sectores defectuosos: 0 sectores malos; el disco al completo está OK.
las 3 particiones están correctas.

A expensas de que pueda sacar el HD y pincharlo en un PC para extraer el registro smart...
creo que Wifislax no está manejando ext3 correctamente,
por lo menos maneja ext3 de modo distinto a como lo hace Slax o Systemrescue.

Estaba esperando en el foro algún mensaje del mismo tipo,
ya que lo que estoy diciendo es bastante importante.. pero como no ha salido seré yo el primero...

Puedo enviar en siguientes mensajes los comandos que he usado y los log...
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 09-01-2015, 19:14 (Viernes)
por supuesto el md5 era correcto, y se instaló en usb correctamente,
uso el kernel normal, y como entorno uso Xfce
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 09-01-2015, 19:30 (Viernes)
wifislax -->> ext4
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 09-01-2015, 19:51 (Viernes)
Hola UsuarioNuevo,

¿Que me estás diciendo?
¿Que Wifislax es INCAPAZ de manejar un disco externo en por ejemplo ntfs, ext3, ext2, .......?
¿es eso?
es que tu brevedad no ayuda...

saludos.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 09-01-2015, 20:49 (Viernes)
Hola UsuarioNuevo,

¿Que me estás diciendo?
¿Que Wifislax es INCAPAZ de manejar un disco externo en por ejemplo ntfs, ext3, ext2, .......?
¿es eso?
es que tu brevedad no ayuda...

saludos.


que formatees la partición de wifislax en ext4 , punto.

ext3 esta obsoleto.

y creo que a slax , tambien le vendria bien usar ext4 , ...ext4 da mejor rendimiento que ext3.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 09-01-2015, 22:13 (Viernes)
Hola otra vez,
aprecio mucho vuestro trabajo, pero creo que no entendiste mi mensaje,

Wifislax lo ejecuto desde un pen-usb de 4 gigas,
lo que falla es cuando le conecto un disco duro externo en el que tengo ficheros varios, copias de seguridad, y algún vídeo/película.
ese disco lo tengo en ext3, y debería estar soportado en wifislax (entiendo), creo que no es mucho pedir,

espero que sea una confusión lo que tenemos, y pueda acceder al disco duro externo.

saludos.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 09-01-2015, 22:21 (Viernes)
creo que ahora entiendo ..

lo que sucede es que en wifislax pinchas el disco , y no es reconocido ??

mensajes de error, captura de pantalla del error ... ?¿


__________

no deberia sre necesario , pero puedes probar añadiendo ext3 al fichero

/etc/fylesystems

si lo bares veras que pone


ntfs
ntfs-3g


pues debajo añadele ext3  ..y cuentame.


¿donde estan esos logs de dmesg? ... 

necesito saber exactamente cuantas paticiones y de que tipo , tienes en es hdd ,para intentar forzar el problema en una de mis maquinas  , asi todo sera mas rapido.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 10-01-2015, 04:05 (Sábado)
tronco va!!!

dmesg:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.35-wifislax (root@wifislax) (gcc ver. 4.8.3 (GCC) ) #1 Thu Dec 11 11:03:01 CET 2014
[    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6cffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f6d0000-0x000000003f6e1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f6e2000-0x000000003f6e2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f6e3000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Dell Inc. Inspiron 910/CN0J14, BIOS A07 04/09/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [mem 0x000f7fa0-0x000f7faf] mapped at [c00f7fa0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000]  [mem 0x37000000-0x373fffff] page 4k
[    0.000000] BRK [0x01647000, 0x01647fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[    0.000000]  [mem 0x30000000-0x36ffffff] page 4k
[    0.000000] BRK [0x01648000, 0x01648fff] PGTABLE
[    0.000000] BRK [0x01649000, 0x01649fff] PGTABLE
[    0.000000] BRK [0x0164a000, 0x0164afff] PGTABLE
[    0.000000] BRK [0x0164b000, 0x0164bfff] PGTABLE
[    0.000000] BRK [0x0164c000, 0x0164cfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x2fffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] RAMDISK: [mem 0x3f617000-0x3f6cefff]
[    0.000000] Allocated new RAMDISK: [mem 0x37746000-0x377fd767]
[    0.000000] Move RAMDISK from [mem 0x3f617000-0x3f6ce767] to [mem 0x37746000-0x377fd767]
[    0.000000] ACPI: RSDP 000f7f70 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 3f6dbed2 0006C (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3f6e1d48 000F4 (v03 INTEL  CALISTGA 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 3f6dcdb7 04F1D (v01 INTEL  CALISTGA 06040000 INTL 20050624)
[    0.000000] ACPI: FACS 3f6e2fc0 00040
[    0.000000] ACPI: APIC 3f6e1e3c 00068 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: HPET 3f6e1ea4 00038 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 3f6e1edc 0003C (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: TCPA 3f6e1f18 00032 (v01 PTLTD  CALISTGA 06040000  PTL 00000001)
[    0.000000] ACPI: TMOR 3f6e1f4a 00026 (v01 PTLTD           06040000 PTL  00000003)
[    0.000000] ACPI: APIC 3f6e1f70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 3f6e1fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 3f6dbf3e 004F6 (v02  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger_kernel
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x3f6cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3f6cffff]
[    0.000000] On node 0 totalpages: 259694
[    0.000000] free_area_init_node: node 0, pgdat c157244c, node_mem_map f6b3f020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32466 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [ 0 ] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257918
[    0.000000] Kernel command line: initrd=/boot/initrd.xz vga=788 noload=000-PAE;005-K;013-W BOOT_IMAGE=/boot/vmlinuz
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2078328 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[    0.000000] Memory: 1019680K/1038776K available (3950k kernel code;315k rwdata;1332k rodata;448k init;344k bss;19096k reserv;129864k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1579000 - 0xc15e9000   ( 448 kB)
[    0.000000]       .data : 0xc13dbba5 - 0xc1578c80   (1652 kB)
[    0.000000]       .text : 0xc1000000 - 0xc13dbba5   (3950 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1595.965 MHz processor
[    0.001002] Calibrating delay loop (skipped), value calculated using timer freq.. 3191.93 BogoMIPS
[    0.001020] pid_max: default: 32768 minimum: 301
[    0.001090] Mount-cache hash table entries: 512
[    0.001437] Initializing cgroup subsys memory
[    0.002023] Initializing cgroup subsys devices
[    0.002034] Initializing cgroup subsys freezer
[    0.002044] Initializing cgroup subsys blkio
[    0.002053] Initializing cgroup subsys perf_event
[    0.002102] Atom PSE erratum detected, BIOS microcode update recommended
[    0.002118] mce: CPU supports 5 MCE banks
[    0.002137] CPU0: Thermal monitoring enabled (TM1)
[    0.002163] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.002163] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.002163] tlb_flushall_shift: 6
[    0.002183] CPU: Intel(R) Atom(TM) CPU N270   @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
[    0.002265] ACPI: Core revision 20130725
[    0.008054] ACPI: All ACPI Tables successfully acquired
[    0.009108] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[    0.009138] ... version:                3
[    0.009148] ... bit width:              40
[    0.009155] ... generic registers:      2
[    0.009163] ... value mask:             000000ffffffffff
[    0.009172] ... max period:             000000007fffffff
[    0.009180] ... fixed-purpose events:   3
[    0.009188] ... event mask:             0000000700000003
[    0.010129] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.010623] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.021000] devtmpfs: initialized
[    0.021000] PM: Registering ACPI NVS region [mem 0x3f6e2000-0x3f6e2fff] (4096 bytes)
[    0.021000] pinctrl core: initialized pinctrl subsystem
[    0.021078] regulator-dummy: no parameters
[    0.021254] NET: Registered protocol family 16
[    0.021969] cpuidle: using governor ladder
[    0.021981] cpuidle: using governor menu
[    0.022078] ACPI: bus type PCI registered
[    0.022088] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.022398] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.022417] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.022427] PCI: Using MMCONFIG for extended config space
[    0.022436] PCI: Using configuration type 1 for base access
[    0.040276] bio: create slab <bio-0> at 0
[    0.040663] ACPI: Added _OSI(Module Device)
[    0.040675] ACPI: Added _OSI(Processor Device)
[    0.040685] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040694] ACPI: Added _OSI(Processor Aggregator Device)
[    0.042495] ACPI: EC: Look up EC in DSDT
[    0.046202] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.047377] ACPI: SSDT 3f6dca9e 00245 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.047844] ACPI: Dynamic OEM Table Load:
[    0.047856] ACPI: SSDT   (null) 00245 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.048149] ACPI: SSDT 3f6dc434 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.048570] ACPI: Dynamic OEM Table Load:
[    0.048582] ACPI: SSDT   (null) 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.054075] ACPI: EC: GPE storm detected(9 GPEs), transactions will use polling mode
[    0.109034] ACPI: Interpreter enabled
[    0.109060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (hwxface-571)
[    0.109081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (hwxface-571)
[    0.109125] ACPI: (supports S0 S3 S4 S5)
[    0.109134] ACPI: Using IOAPIC for interrupt routing
[    0.109280] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.109694] ACPI: No dock devices found.
[    0.187971] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.187998] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.188007] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.189816] PCI host bridge to bus 0000:00
[    0.189832] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.189845] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.189857] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.189869] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.189881] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.189893] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.189905] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.189917] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.189929] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.189957] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
[    0.190251] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
[    0.190271] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf007ffff]
[    0.190283] pci 0000:00:02.0: reg 0x14: [io  0x1800-0x1807]
[    0.190295] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.190306] pci 0000:00:02.0: reg 0x1c: [mem 0xf0300000-0xf033ffff]
[    0.190577] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.190594] pci 0000:00:02.1: reg 0x10: [mem 0xf0080000-0xf00fffff]
[    0.190951] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.190985] pci 0000:00:1b.0: reg 0x10: [mem 0xf0540000-0xf0543fff 64bit]
[    0.191121] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.191247] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.191420] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.191554] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.191828] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.191963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.192250] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.192385] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.192656] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.192730] pci 0000:00:1d.0: reg 0x20: [io  0x1820-0x183f]
[    0.192915] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.193092] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.193165] pci 0000:00:1d.1: reg 0x20: [io  0x1840-0x185f]
[    0.193345] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.193508] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.193581] pci 0000:00:1d.2: reg 0x20: [io  0x1860-0x187f]
[    0.193759] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.193926] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.194007] pci 0000:00:1d.3: reg 0x20: [io  0x1880-0x189f]
[    0.194186] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.194369] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.194405] pci 0000:00:1d.7: reg 0x10: [mem 0xf0544000-0xf05443ff]
[    0.194537] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.194653] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.194821] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.195151] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.195276] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPIcpu throttle [0x00001010-0x..1015 flags 0x80000000]
[    0.195300] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.195316] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.195332] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 007f)
[    0.195350] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[    0.195632] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.195658] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.195677] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.195695] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.195713] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.195731] pci 0000:00:1f.1: reg 0x20: [io  0x1810-0x181f]
[    0.196014] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.196094] pci 0000:00:1f.3: reg 0x20: [io  0x18a0-0x18bf]
[    0.196664] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
[    0.196701] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf01000ff]
[    0.196810] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.197188] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
[    0.197223] pci 0000:02:00.2: reg 0x10: [mem 0xf0100400-0xf01004ff]
[    0.197635] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
[    0.197671] pci 0000:02:00.3: reg 0x10: [mem 0xf0100800-0xf01008ff]
[    0.200034] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.200057] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.200518] pci 0000:03:00.0: [14e4:4315] type 00 class 0x028000
[    0.200597] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
[    0.200990] pci 0000:03:00.0: supports D1 D2
[    0.200996] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.201116] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.201556] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.201577] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.201873] pci 0000:04:00.0: [10ec:8136] type 00 class 0x020000
[    0.201959] pci 0000:04:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.202098] pci 0000:04:00.0: reg 0x18: [mem 0xf0610000-0xf0610fff 64bit pref]
[    0.202175] pci 0000:04:00.0: reg 0x20: [mem 0xf0600000-0xf060ffff 64bit pref]
[    0.202238] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.202512] pci 0000:04:00.0: supports D1 D2
[    0.202518] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.202667] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.202895] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.202912] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.202929] pci 0000:00:1c.2:   bridge window [mem 0xf0600000-0xf06fffff 64bit pref]
[    0.203244] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.203274] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.203280] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.203287] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.203294] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.203300] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.203306] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.203313] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.203320] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.203575] pci_bus 0000:00: on NUMA node 0
[    0.204061] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.204239] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.204412] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.204587] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.204761] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.204936] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.205124] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.205297] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.225398] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.225430] ACPI: \_SB_.PCI0: notify handler is installed
[    0.225525] Found 1 acpi root devices
[    0.225613] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.226056] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.226079] vgaarb: loaded
[    0.226087] vgaarb: bridge control possible 0000:00:02.0
[    0.226658] SCSI subsystem initialized
[    0.226917] libata version 3.00 loaded.
[    0.226933] ACPI: bus type USB registered
[    0.227147] usbcore: registered new interface driver usbfs
[    0.227248] usbcore: registered new interface driver hub
[    0.227356] usbcore: registered new device driver usb
[    0.228020] PCI: Using ACPI for IRQ routing
[    0.239853] PCI: pci_cache_line_size set to 64 bytes
[    0.240275] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.240282] e820: reserve RAM buffer [mem 0x3f6d0000-0x3fffffff]
[    0.240784] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.240805] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.240821] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.243015] Switched to clocksource hpet
[    0.243158] pnp: PnP ACPI init
[    0.243192] ACPI: bus type PNP registered
[    0.243498] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.243516] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.243529] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.243542] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.243554] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.243567] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.243580] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.243593] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.243609] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.244158] pnp 00:01: [dma 4]
[    0.244305] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.244452] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.244797] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.244817] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.244994] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.245234] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.245250] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.245263] system 00:05: [io  0x1000-0x107f] could not be reserved
[    0.245276] system 00:05: [io  0x1180-0x11bf] has been reserved
[    0.245288] system 00:05: [io  0x1640-0x164f] has been reserved
[    0.245301] system 00:05: [io  0xfe00-0xfe7f] has been reserved
[    0.245313] system 00:05: [io  0xff00-0xff7f] has been reserved
[    0.245328] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.245586] system 00:06: [io  0x06a0-0x06af] has been reserved
[    0.245602] system 00:06: [io  0x06b0-0x06ff] has been reserved
[    0.245616] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.245779] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.265195] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.265363] pnp 00:09: Plug and Play ACPI device, IDs SYN0601 SYN0600 SYN0002 PNP0f13 (active)
[    0.265406] pnp: PnP ACPI: found 10 devices
[    0.265417] ACPI: bus type PNP unregistered
[    0.309285] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.309298] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
[    0.309318] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.309326] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.309345] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff] to [bus 04] add_size 400000
[    0.309374] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.309394] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[    0.309402] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.309409] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[    0.309416] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.309423] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.309436] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x402fffff pref]
[    0.309455] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40300000-0x404fffff 64bit pref]
[    0.309473] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40500000-0x409fffff]
[    0.309489] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.309503] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.309520] pci 0000:02:00.0: BAR 6: assigned [mem 0x40000000-0x4000ffff pref]
[    0.309536] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.309548] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.309565] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.309580] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x402fffff pref]
[    0.309601] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.309613] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.309630] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.309646] pci 0000:00:1c.1:   bridge window [mem 0x40300000-0x404fffff 64bit pref]
[    0.309669] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0620000-0xf063ffff pref]
[    0.309683] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.309696] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.309712] pci 0000:00:1c.2:   bridge window [mem 0x40500000-0x409fffff]
[    0.309728] pci 0000:00:1c.2:   bridge window [mem 0xf0600000-0xf06fffff 64bit pref]
[    0.309749] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.309776] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.309782] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.309789] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.309795] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.309801] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.309808] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.309814] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.309820] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff]
[    0.309827] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.309833] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.309840] pci_bus 0000:02: resource 2 [mem 0x40000000-0x402fffff pref]
[    0.309846] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.309852] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.309859] pci_bus 0000:03: resource 2 [mem 0x40300000-0x404fffff 64bit pref]
[    0.309865] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.309872] pci_bus 0000:04: resource 1 [mem 0x40500000-0x409fffff]
[    0.309878] pci_bus 0000:04: resource 2 [mem 0xf0600000-0xf06fffff 64bit pref]
[    0.309885] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.309891] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.309897] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.309903] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.309910] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.309916] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.309922] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
[    0.309929] pci_bus 0000:05: resource 11 [mem 0x40000000-0xfebfffff]
[    0.309996] NET: Registered protocol family 2
[    0.310436] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.310509] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.310552] TCP: Hash tables configured (established 8192 bind 8192)
[    0.310607] TCP: reno registered
[    0.310619] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.310637] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.310757] NET: Registered protocol family 1
[    0.310798] pci 0000:00:02.0: Boot video device
[    0.313564] PCI: CLS 64 bytes, default 64
[    0.313673] Trying to unpack rootfs image as initramfs...
[    0.542812] Freeing initrd memory: 736K (f7746000 - f77fe000)
[    0.542925] Simple Boot Flag at 0x36 set to 0x1
[    0.544771] bounce pool size: 64 pages
[    0.552638] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.552981] fuse init (API version 7.22)
[    0.553387] SGI XFS with ACLs, security attrib, realtime, large block/inode numbers, no debug enabled
[    0.554736] aufs 3.12.x-20141208
[    0.554756] msgmni has been set to 1739
[    0.555255] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.555272] io scheduler noop registered
[    0.555280] io scheduler deadline registered
[    0.555305] io scheduler cfq registered (default)
[    0.555878] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.556376] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.556834] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.557365] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.557610] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.557928] vesafb: mode is 800x600x16, linelength=1600, pages=7
[    0.557939] vesafb: scrolling: redraw
[    0.557949] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.557975] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1875k, total 7872k
[    0.572003] Console: switching to colour frame buffer device 100x37
[    0.586372] fb0: VESA VGA frame buffer device
[    0.586813] intel_idle: MWAIT substates: 0x20220
[    0.586820] intel_idle: v0.4 model 0x1C
[    0.586824] intel_idle: lapic_timer_reliable_states 0x2
[    0.586829] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.587367] GHES: HEST is not enabled!
[    0.587562] isapnp: Scanning for PnP cards...
[    0.900631] isapnp: No Plug & Play device found
[    0.911792] brd: module loaded
[    0.919935] loop: module loaded
[    0.927664] ata_piix 0000:00:1f.1: version 2.13
[    0.928039] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.929799] scsi0 : ata_piix
[    0.935524] scsi1 : ata_piix
[    0.941022] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.946571] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.952212] ata2: port disabled--ignoring
[    0.957618] Fusion MPT base driver 3.04.20
[    0.962948] Copyright (c) 1999-2008 LSI Corporation
[    0.968227] Fusion MPT SPI Host driver 3.04.20
[    0.973480] Fusion MPT FC Host driver 3.04.20
[    0.978717] Fusion MPT SAS Host driver 3.04.20
[    0.983952] Fusion MPT misc device (ioctl) driver 3.04.20
[    0.989160] mptctl: Registered with Fusion MPT base driver
[    0.994162] mptctl: /dev/mptctl @ (major,minor=10,220)
[    0.999167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.004353] ehci-pci: EHCI PCI platform driver
[    1.009917] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    1.009935] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.015167] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.020454] ehci-pci 0000:00:1d.7: debug port 1
[    1.029463] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.029492] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0544000
[    1.040033] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.045609] hub 1-0:1.0: USB hub found
[    1.050596] hub 1-0:1.0: 8 ports detected
[    1.056170] ehci-platform: EHCI generic platform driver
[    1.061040] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.065812] ohci-pci: OHCI PCI platform driver
[    1.070556] ohci-platform: OHCI generic platform driver
[    1.075212] uhci_hcd: USB Universal Host Controller Interface driver
[    1.080258] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.080268] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.084991] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.089853] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.095203] hub 2-0:1.0: USB hub found
[    1.100088] hub 2-0:1.0: 2 ports detected
[    1.105584] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.105593] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.110518] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.115687] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.121194] hub 3-0:1.0: USB hub found
[    1.126173] hub 3-0:1.0: 2 ports detected
[    1.131487] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.131496] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.136486] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.141651] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.147231] hub 4-0:1.0: USB hub found
[    1.152266] hub 4-0:1.0: 2 ports detected
[    1.157752] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.157760] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.162719] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.167739] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.173162] hub 5-0:1.0: USB hub found
[    1.178056] hub 5-0:1.0: 2 ports detected
[    1.183366] usbcore: registered new interface driver usb-storage
[    1.188407] usbcore: registered new interface driver ums-alauda
[    1.193382] usbcore: registered new interface driver ums-cypress
[    1.198228] usbcore: registered new interface driver ums-datafab
[    1.203053] usbcore: registered new interface driver ums-freecom
[    1.207846] usbcore: registered new interface driver ums-isd200
[    1.212395] usbcore: registered new interface driver ums-jumpshot
[    1.216819] usbcore: registered new interface driver ums-karma
[    1.221134] usbcore: registered new interface driver ums-onetouch
[    1.225319] usbcore: registered new interface driver ums-realtek
[    1.229356] usbcore: registered new interface driver ums-sddr09
[    1.233357] usbcore: registered new interface driver ums-sddr55
[    1.237128] usbcore: registered new interface driver ums-usbat
[    1.240905] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.272256] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.276071] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.280050] rtc_cmos 00:07: RTC can wake from S4
[    1.284282] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.288038] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.292091] sdhci: Secure Digital Host Controller Interface driver
[    1.295999] sdhci: Copyright(c) Pierre Ossman
[    1.299921] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0)
[    1.304163] mmc0: no vqmmc regulator found
[    1.308147] mmc0: no vmmc regulator found
[    1.312280] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
[    1.316417] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.320741] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[    1.325196] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    1.329413] wbsd: Copyright(c) Pierre Ossman
[    1.335220] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.341323] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    1.341796] usbcore: registered new interface driver vub300
[    1.351192] usbcore: registered new interface driver ushc
[    1.356047] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.371387] hidraw: raw HID events driver (C) Jiri Kosina
[    1.376783] usbcore: registered new interface driver usbhid
[    1.382027] usbhid: USB HID core driver
[    1.392240] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.398186] TCP: cubic registered
[    1.403855] Initializing XFRM netlink socket
[    1.409630] NET: Registered protocol family 17
[    1.415551] Key type dns_resolver registered
[    1.422037] Using IPI Shortcut mode
[    1.428264] registered taskstats version 1
[    1.434848] regulator-dummy: disabling
[    1.440663] rtc_cmos 00:07: setting system clock to 2015-01-10 03:29:47 UTC (1420860587)
[    1.447090] Freeing unused kernel memory: 448K (c1579000 - c15e9000)
[    1.530082] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.533144] scsi2 : usb-storage 1-1:1.0
[    1.602777] mmc0: new SDHC card at address e624
[    1.603072] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[    1.617603]  mmcblk0: p1 p2
[    1.636064] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    2.538056] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[    2.539410] sd 2:0:0:0: [sda] 15356160 512-byte logical blocks: (7.86 GB/7.32 GiB)
[    2.540149] sd 2:0:0:0: [sda] Write Protect is off
[    2.540157] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[    2.540771] sd 2:0:0:0: [sda] No Caching mode page found
[    2.540777] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    2.544271] sd 2:0:0:0: [sda] No Caching mode page found
[    2.544279] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    2.546344]  sda: sda1 sda2
[    2.549269] sd 2:0:0:0: [sda] No Caching mode page found
[    2.549277] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    2.549284] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    2.974540] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt.
[    2.981128] FAT-fs (mmcblk0p2): Volume was not properly unmounted. Some data may be corrupt.
[    2.998911] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt.
[   10.948267] udevd[1434]: starting version 182
[   12.207918] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   12.207981] ACPI: Lid Switch [LID0]
[   12.208195] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   12.208205] ACPI: Power Button [PWRB]
[   12.208361] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[   12.208370] ACPI: Sleep Button [SLPB]
[   12.208538] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   12.208546] ACPI: Power Button [PWRF]
[   12.214438] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   12.220290] ACPI: AC Adapter [ACAD] (on-line)
[   12.638586] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[   12.720890] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   12.720913] ACPI: Battery Slot [BAT1] (battery present)
[   12.944558] microcode: Microcode Update Driver: v2.00, Peter Oruba
[   13.197153] Linux agpgart interface v0.103
[   13.295435] intel_rng: FWH not detected
[   13.591359] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   13.672509] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   13.672539] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[   13.672993] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[   13.673594] r8169 0000:04:00.0 eth0: RTL8102e at 0xf8f8a000, 00:21:70:b6:5a:fa, XID 04a00000 IRQ 44
[   13.738400] thermal LNXTHERM:00: registered as thermal_zone0
[   13.738409] ACPI: Thermal Zone [TZ01] (54 C)
[   13.773360] acpi device:01: registered as cooling_device0
[   13.773466] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.775497] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   14.146940] ACPI: Requesting acpi_cpufreq
[   14.239777] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.240240] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.241187] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[   14.241259] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[   14.241319] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[   14.241587] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   14.242504] ACPI Warning: 0x000018a0-0x000018bf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (utaddr-251)
[   14.242519] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.243156] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (utaddr-251)
[   14.243171] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.243178] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (utaddr-251)
[   14.243187] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.243191] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130725/utaddr-251)
[   14.243200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.243205] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.294335] compal_laptop: Identified laptop model 'Dell Mini 9'
[   14.331102] compal_laptop: Driver 0.2.7 successfully loaded
[   14.344765] media: Linux media interface: v0.10
[   14.432384] [drm] Initialized drm 1.1.0 20060810
[   14.809305] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[   14.809330] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[   14.809351] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[   14.809371] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[   14.809391] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[   14.946493] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[   15.187433] Linux video capture interface: v2.00
[   15.748118] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, board id: 3655, fw id: 504172
[   15.836156] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   16.212552] mousedev: PS/2 mouse device common for all mice
[   16.231174] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:63e4)
[   16.250101] input: Laptop_Int_Webcam_0.3M as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input11
[   16.250492] usbcore: registered new interface driver uvcvideo
[   16.250497] USB Video Class driver (1.1.1)
[   16.273756] [drm] Memory usable by graphics device = 256M
[   16.273767] checking generic (d0000000 7b0000) vs hw (d0000000 10000000)
[   16.273772] fb: switching to inteldrmfb from VESA VGA
[   16.273841] Console: switching to colour dummy device 80x25
[   16.278158] i915 0000:00:02.0: setting latency timer to 64
[   16.286060] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   16.286067] [drm] Driver supports precise vblank timestamp query.
[   16.286375] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   16.340394] [drm] initialized overlay support
[   16.626869] cfg80211: Calling CRDA to update world regulatory domain
[   16.688165] fbcon: inteldrmfb (fb0) is primary device
[   16.907426] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   16.925095] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[   16.937213] Broadcom 43xx driver loaded [ Features: PMNLS ]
[   16.953332] cfg80211: World regulatory domain updated:
[   16.953334] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.953339] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.953341] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.953344] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   16.953346] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[   16.953349] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[   16.953351] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[   16.953371] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   16.953374] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   17.005261] Console: switching to colour frame buffer device 128x37
[   17.014195] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   17.014202] i915 0000:00:02.0: registered panic notifier
[   17.017464] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   17.181140] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.416784] device-mapper: uevent: version 1.0.3
[   17.418975] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat
[   18.110573] lp: driver loaded but no devices found
[   18.215104] ppdev: user-space parallel port driver
[   18.304959] cpufreq-nforce2: No nForce2 chipset.
[   23.250036] Bluetooth: Core ver 2.16
[   23.250098] NET: Registered protocol family 31
[   23.250103] Bluetooth: HCI device and connection manager initialized
[   23.250117] Bluetooth: HCI socket layer initialized
[   23.250125] Bluetooth: L2CAP socket layer initialized
[   23.250139] Bluetooth: SCO socket layer initialized
[   23.516984] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.516992] Bluetooth: BNEP filters: protocol multicast
[   23.517050] Bluetooth: BNEP socket layer initialized
[   30.008590] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[   31.937667] r8169 0000:04:00.0 eth0: link down
[   36.583927] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   36.584735] zram: Created 1 device(s) ...
[   36.687801] Adding 262144k swap on /dev/zram0.  Priority:32767 extents:1 across:262144k SS
[   40.288655] NET: Registered protocol family 10
[   40.289105] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   40.289530] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   49.572863] cfg80211: Calling CRDA for country: BO
[   50.142096] cfg80211: Regulatory domain changed to country: BO
[   50.142105] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   50.142111] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   50.142116] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[   52.431893] b43-phy1: Broadcom 4312 WLAN found (core revision 15)
[   52.449238] b43-phy1: Found PHY: Analog 6, Type 5 (LP), Revision 1
[   52.457832] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   52.473114] Broadcom 43xx driver loaded [ Features: PMNLS ]
[   52.685259] b43-phy1: Loading firmware version 784.2 (2012-08-15 21:35:19)
[   55.388311] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   99.645267] b43-phy1: Loading firmware version 784.2 (2012-08-15 21:35:19)
[  101.912634] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  125.547085] Bluetooth: RFCOMM TTY layer initialized
[  125.547114] Bluetooth: RFCOMM socket layer initialized
[  125.547119] Bluetooth: RFCOMM ver 1.11

(hasta aquí es el dmesg inicial)

--------------------------------------------------------------------------------------------------------

[  155.035453] NOHZ: local_softirq_pending 08
[  155.104725] NOHZ: local_softirq_pending 08
[  155.242489] NOHZ: local_softirq_pending 08
[  155.311469] NOHZ: local_softirq_pending 08
[  155.449468] NOHZ: local_softirq_pending 08
[  155.518691] NOHZ: local_softirq_pending 08
[  155.587411] NOHZ: local_softirq_pending 08
[  155.656741] NOHZ: local_softirq_pending 08
[  155.794434] NOHZ: local_softirq_pending 08
[  155.864008] NOHZ: local_softirq_pending 08
[  338.122096] usb 1-8: new high-speed USB device number 4 using ehci-pci
[  338.241570] usb-storage 1-8:1.0: USB Mass Storage device detected
[  338.246163] scsi3 : usb-storage 1-8:1.0
[  347.237027] scsi 3:0:0:0: Direct-Access     Maxtor   6L200R0          BAH4 PQ: 0 ANSI: 2
[  347.240849] sd 3:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[  347.241846] sd 3:0:0:0: [sdb] Write Protect is off
[  347.241857] sd 3:0:0:0: [sdb] Mode Sense: 53 00 00 08
[  347.242839] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  347.311856]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[  347.318239] sd 3:0:0:0: [sdb] Attached SCSI disk

(hasta aquí es el dmesg con el disco externo encendido pero sin montar ninguna partición)

--------------------------------------------------------------------------------------------------------

[  595.651076] kjournald starting.  Commit interval 5 seconds
[  595.651795] EXT3-fs (sdb5): using internal journal
[  595.651805] EXT3-fs (sdb5): mounted filesystem with ordered data mode
[  602.018251] end_request: critical target error, dev sdb, sector 195881401
[  602.018263] Buffer I/O error on device sdb5, logical block 8126981
[  602.018268] lost page write due to I/O error on sdb5
[  602.018289] Aborting journal on device sdb5.

(hasta aquí es el dmesg con el disco externo encendido con una particion ext3 montada)
(el tipo de error es el mismo para sdb5 y para sdb6)
--------------------------------------------------------------------------------------------------------

-ésto no pasa con slax 7.0.8 ni con systemrescuecd

-desde systemrescuecd (y desde slax también), una vez reparada la particion ext3, he hecho ésto:
   # badblocks -nvs /dev/sdb5
   y badblocks -nvs /dev/sdb6
      y el resultado: todo bien, ningun sector malo.

RESUMEN:
   -desde systemrescue o slax:
         # fsck.ext3 -v /dev/sdb5    y el sistema está OK
           me muevo por directorios, leo y escribo ficheros y dmesg no notifica ningún fallo.
           repito otra vez fsck.ext3 con idéntico resultado.

   -desde wifislax en cuanto monto ext3 se pone en modo lectura y dmesg arroja fallo
           fsck.ext3 dice que el sistema está mal.
       (me obliga a repararlo desde systemrescue, pues no me fío desde wifislax)

(previamente he incluído como módulo el fichero /etc/filesystem con el añadido ext3 al final,
por si era eso, pero no, no era)

raro,raro,raro..



---------------------------------------

el fdisk del hd-externo es éste:

Disk /dev/sdb: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders, 398297088 sectores en total
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificador del disco: 0x6fcedb44

Disposit. Inicio    Comienzo      Fin      Bloques  Id  Sistema
/dev/sdb1              63   130865489    65432713+   c  W95 FAT32 (LBA)
/dev/sdb2       130865490   392596469   130865490    5  Extendida
/dev/sdb5       130865553   261730979    65432713+  83  Linux
/dev/sdb6       261731043   392596469    65432713+  83  Linux

con sdb1 (fat32) no hay problema,

el problema es en sdb5 y sdb6 (ambas ext3) y con wifislax (no con otras distros)

saludos..
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 10-01-2015, 20:09 (Sábado)
me he traido un hdd externo al trabajo , para hacer pruebas ..

¿ sucede lo mismo si arrancas con el dhd ya pinchado y si arrancas y lo pinchas despues ?


pss , pues no se , he formateado el disco externo en ext3 , .. cero problemas, ..puedo leer y escribir en el ..

no creo que sea el caso , pero he leido que si al disco le queda poco espacio , algunos sistemas lo montan como READ ONLY , pero no se.

¿en wifislax 4.9 funcionaba bien ese disco ?

lo digo por que hubo problemas y se cambio la config del kernel ...aunque solo hay una iso de pruebas por hay (la misma que para los que se le congelaba el sistema al usar mode monitosr con ralink)
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: geminis_demon en 10-01-2015, 20:58 (Sábado)
Si ha hecho el live usb con yumi el sistema arranca con el parámetro "noauto", quizás tenga algo que ver..
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 10-01-2015, 20:59 (Sábado)
[   49.028583] kjournald starting.  Commit interval 5 seconds
[   49.029509] EXT3-fs (sdb1): using internal journal
[   49.029517] EXT3-fs (sdb1): mounted filesystem with ordered data mode


no tengo ningu nproblema de lectura ni escritura ni mensajes raros...
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 10-01-2015, 20:59 (Sábado)
Si ha hecho el live usb con yumi el sistema arranca con el parámetro "noauto", quizás tenga algo que ver..

voy a arrancar con noauto ... a ver.


NO HAY FORMA DE REPRODUCIR EL ERROR. ...

he arrancado con noauto , con el disco pinchado , y pinchandolo despues , y funciona siempore bien , puedo leer ye scribir en el.


no se si tendra que ver , ¿escriotiro kde o xfce?


voy a ver en xfce , aunque no deberia afectar.


_________________________________________

un dia geminis y yo hablemos acerca de que el sistema deberia arrancar , mostrando los discos , pero no montarlos ... tal vez habria que retomar este tema.


mirar el initrd de slax , que muestra los hdd , pero no los monta , (como si usara por defceto el noauto ) , el problema era xfce ...



nada , con xfce me va perfecto tambien. ,auto , no auto , antes , despues, ..siempre puedo leer y escribir.


Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 11-01-2015, 22:05 (Domingo)
seguimos informando...............................

Problema de espacio en las particiones no es, ya que:

hd-externo maxtor:
==================
tamaño de las particiones y espacio libre:
------------------------------------------
root@slax:~# df -h /dev/sdb1
Filesystem      Size  Used Avail Use% Mounted on
/dev/sdb1        63G   58G  5,3G  92% /media/49A6-B38F
root@slax:~# df -h /dev/sdb5
Filesystem      Size  Used Avail Use% Mounted on
/dev/sdb5        62G   47G   12G  80% /media/e27f9b55-1d7d-4738-ab83-9a23c3f84e41
root@slax:~# df -h /dev/sdb6
Filesystem      Size  Used Avail Use% Mounted on
/dev/sdb6        62G   54G  4,4G  93% /media/bc1560b2-b7cd-45d9-87fc-4d64196505d3

(dev/sdb1 --> fat32)
(dev/sdb5 --> ext3)
(dev/sdb6 --> ext3)

-----
en un pen-usb he instalado la wifislax 4.7.2 que es una wifislax que tenía
y recuerdo me funcionó bien en su momento (kernel 3.12.0-wifislax)

pues bien, he entrado en las 3 particiones he mirado, leído, y escrito, sin ningún problema,
y dmesg no ha arrojado ningún fallo.

he desmontado las 3 particiones y desde el mismo wifislax-4.7.2 he hecho:
#fsck -v /dev/sdbX (1, 5 y 6)

y las 3 particiones estaban OK.

así que mi conclusión con wifislax-4.7.2-----> maneja bien mis particiones ext3.
-----
Otra cosa:
después he arrancado con wifislax-4.10 (kernel 3.12.35-wifislax)
y una vez iniciado,
he conectado el hd-externo y lo primero que he hecho es esto:
# fsck -v /dev/sdb5
fsck de util-linux 2.21.2
e2fsck 1.42.8 (20-Jun-2013)
Superbloque last mount time is in the future.
   (by less than a day, probably due to the hardware clock being incorrectly set)  Arreglar? ¡cancelado!
-------
pregunta:
¿puede ser éste el problema?
-------
después desde wifislax-4.10 he montado la otra particion ext3 (sdb6)
y al poco dmesg ha arrojado el error mencionado...y se ha puesto en modo lectura.
-------
entre todo estos pasos, la bios (hora) no ha sido modificada
y en todos los sistemas la hora tanto en el panel como en consola (date) era la misma

???

raro, raro, raro...

saludos.
>
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 11-01-2015, 22:13 (Domingo)
ene ste post , respuesta 2 , deje una iso con la configuracion de kernel cambiada.

o en la respuesta 1 , si sabes cambiar el kernel.


https://foro.seguridadwireless.net/colaboracion-y-desarrollo-de-nuestras-lives/post-para-la-gente-que-se-le-cuelga-el-sistea-al-usar-el-modo-monitor-ralink/
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 11-01-2015, 22:20 (Domingo)
Responder varias cosas:

- a ver, yo uso xfce, una vez que wifislax ha mostrado el escritorio entonces conecto el hd-externo
pero nunca me monta las particiones automáticamente, las tengo que montar yo manualmente (desde Thunar, pincho en la partición que quiero montar, y se monta). no creo que ese seal el problema.

- sobre si yumi puede ser la razón: NO. yo instalo wifislax en pen-usb así:
    1-formateo el pen-usb
    2-descargo la iso del ftp y compruebo el md5
    3-extraigo la iso, me crea una carpeta con la iso descomprimida
    4-con mc, copio /boot y /wifislax al pen-usb
    5-desde consola voy a /boot y ejecuto: sh bootinst.sh, y me crea el arranque en el pen-usb
    6- ya está.


-- El hecho de que con wifislax 4.7.2 no haya tenido ningún problema, debería dar alguna pista.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 11-01-2015, 22:35 (Domingo)
yo ya te he dado tambien otra pista ...

eso de que xfce NO TE MONTE LAS PARTICIONES ..pues es raro , ..deberia montarlas todas.

cuando pinchas un pendirve o disco usb , entonces si , es normal  , aparece en la lista y lo montas pinchandole al icono.

¿has probado en kde?

puede ser la configuracion del kernel ...
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 12-01-2015, 00:39 (Lunes)
Claro, en xfce (que es el que yo uso), no se montan las particiones porque el hd-externo solo lo enciendo después de ver el escritorio xfce,

he comprobado que tanto en xfce como en kde si el hd-externo lo enciendo antes, monta automáticamente las particiones

he sustituido los vmlinuz, vmlinuz2 y kernel en la 4.10 (como se me ha dicho) y en el siguiente mensaje hago un informe ampliado porque tela marinera..
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 12-01-2015, 00:48 (Lunes)
ok , prueba por favor en kde ...

Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 12-01-2015, 01:10 (Lunes)
INFORME AMPLIADO. (PARTE 1 de 2)
-------------------------------------------------------

con el nuevo vmlinuz, vmlinuz2 y kernel normal paso a comentar la experiencia

(en la parte 2 que haré mañana me queda volver a la 4.10 original y comprobar estos mismos pasos pero con la iso original)

A) tanto en XFCE como KDE

    A.1.- Si el Hd-externo lo enciendo después de arrancado wifislax (al ver el escritorio)
            entonces al montar una partición ext3 del hd-externo, el fallo que describí continúa,
            es decir dmesg dice que el journaling está mal y la partición se pone en solo-lectura.
            (tanto en xfce como también en kde)

    A.2.- Si el Hd-externo lo enciendo ANTES de arrancar wifislax, particiones se montan automatic.
            y puedo manejar bien la partición ext3 del hd-externo, y dmesg no informa de fallo.
            (tanto en xfce como también en kde)

         A.2.a) PERO!, sorprendido de que funcione OK, desmonto partición ext3, y hago en consola:
                      # fsck.ext3 -v /dev/sdb5

            y lo que me dice es:

                fsck de util-linux 2.21.2
                e2fsck 1.42.8 (20-Jun-2013)
                Superbloque last mount time is in the future.
                (by less than a day, probably due to the hardware clock being incorrectly set)
                Arreglar? ¡cancelado!

            vamos a ver ¿Pero qué coño te he hecho yo?

            Dado que aborto la operación, si compruebo desde slax por ejemplo:

                      # fsck.ext3 -v /dev/sdb5

            me dice que todo está OK.

         A.2.b) Dada la Incongruencia de fsck, no me fío de trabajar con estos mimbres.
         A.2.c) Dado el diferente comportamiento (según el hd-externo lo encienda al principio o al final)
                   tampoco me fío de trabajar con estos mimbres.

para comprobar si esto también afecta a la 4.10 original, mañana repondré la iso original e informaré...

---
Otra cosa: tanto en la 4.10 original como en esta Test (hablo de xfce que es lo que uso por RAM),
una cosa que en versiones anteriores de wifislax no me pasaba es:
               - Que aleatoriamente el Networkmanager (icono) (si pincho en él con el botón derecho
                 del ratón), aleatoriamente digo, a veces se queda "en sombra",
                 sin posibilidad de marcar/desmarcar "Activar Red" y "Activar Inalámbrica",
                 aunque sí me permite conectarme a redes.
                 esto dura hasta que reinicio, y entonces no sé la lotería que me va a tocar.
                 la wifi interna es una broadcom.


mañana más....
>
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 12-01-2015, 01:20 (Lunes)
Hola UsuarioNuevo,
yo no tengo muchos conocimientos sobre tan bajo nivel, pero:

para mí que no es un tema Kde/Xfce,
de hecho he pensado que mañana después de comprobarlo todo otra vez con la 4.10 original,

entrar directamente en modo consola (ni xfce ni kde: CONSOLA), montar a mano la ext3,
y ver el dmesg:

si da fallo.... la tiro al río,

    y si no da fallo la desmonto y le paso un fsck.ext3
           si me dice que está ok ...... empezamos a hablar..
           pero si me dice que "Superbloque last mount time is in the future.", LA TIRO AL RÍO

    me cojo la wifislax 4.7.2, le pongo el módulo del firefox actualizado y asunto arreglado.

Ale, he dicho.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 12-01-2015, 16:34 (Lunes)
Por favor , prueba este parche a ver ...

al menos deberiasn desaparecer los mensajes de que estas en el futuro ..  ;D

esos mensajes aparecen cuando el sistema y la maquina no se ponen de acuerdo en el sistema horario .. o inlcuos cuando saltamos de Windows a Linux..puede provocar fallos tontos.

no es cuestión de que la hora este o no igual a veces son chorradas como el formato

GMT , CEST , UTC

, en wifislax, había una config UTC , y a Windows no le gustan mucho ...además de otro fichero que me parece que estaba mal.
prueba..


http://www.mediafire.com/download/h85f3rw4c743918/test-tiempo.xzm
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 13-01-2015, 02:09 (Martes)
Hola,

tengo noticias malas y buenas con la TEST

las buenas: ahora ya no me dice que estoy en el futuro.
y cuando una partición sea fat32 o ext3 está bien, lo reconoce, y dice que está OK.

las malas: anoche (sería por el sueño) la comprobación fue más rápida de lo deseado,
y esta noche he comprobado que tanto xfce como kde SÍ mantenían dmesg sin errores
durante la lectura de particion ext3.........(cosa que antes sin el parche y con la 4.10-original fallaba al momento)

PERO........ en cuanto le he escrito un pequeño .txt de prueba ha saltado la liebre:
dmesg da el mismo error,
aquí no importa que sea kde o xfce, que el hd-externo esté montando antes o después del arranque

incluso ya como última prueba (con las particiones arregladas desde systemrescue) he entrado
a wifislax con el modo consola que hay en menú,
he montado a mano las particiones, y todo bien en lectura,
hasta que he hecho:

# touch prueba.txt

ahí se jodió el invento. el mismo problema de siempre, y eso que estaba en consola.

a más de más, el último experimento lo he repetido desde wifislax 4.7.2
y ha funcionado a la perfección, tanto en lectura, como en la escritura del fichero de prueba.txt

en cada tentativa el nombre del fichero cambiaba: prueba1.txt, prueba2.txt para q no
hubiese mala interpretación, y he comprobado que en 4.7.2 funciona todo OK y en la test
no ha funcionado ni bajo kde ni bajo xfce ni bajo consola.

así que en mi opinión algo funciona mal en fsck o en el núcleo del sistema,

no estoy diciendo que en otro tipo de sistemas de ficheros funcione mal,
estoy diciendo que en ext3: NO  (al menos a mí me pasa)

supongo que el resultado es extrapolable a la wifislax-4.10-original

por ahora me paso a versiones de wifislax anteriores.

saludos, y duro con ello....

Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 13-01-2015, 17:49 (Martes)
no se si tendra algo que ver , pero


podrias comprobar que cuando puedes escribir y tal las particiones se montan del tipo


/mnt/sdX


y que cuando NO puedes escribir , esta montado en


/media/

?¿


puedes probar lo siguiente


desmonta el disco

si el disco es


sdX

crea una carpeta en

/mnt

con el mismo name


/mnt/sdX

he intenta remontar el disco alli


mount /dev/sdX /mnt/sdX

a ver que pasa...
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: vk496 en 13-01-2015, 18:50 (Martes)
Joer con el ext3... Me ha intrigado y todo.

He conectado mi HDD y no me suenan esos fallos (eso si, ext2 el mio).

Probaré con un USB mio... Haber si me pasa algo parecido.

Salu2
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 13-01-2015, 22:12 (Martes)
Joer con el ext3... Me ha intrigado y todo.

He conectado mi HDD y no me suenan esos fallos (eso si, ext2 el mio).

Probaré con un USB mio... Haber si me pasa algo parecido.

Salu2

yo hice pruebas con un hdd externo en ext3 , y podia leer y escribir siempre en kde y xfce , asi que no se ...es raro.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 14-01-2015, 01:36 (Miércoles)
Hola UsuarioNuevo,

raro, raro sí que es,

Si lees mi último mensaje te darás cuenta que de ningún modo con la 4.10 he conseguido escribir en ext3,
en cambio ahora estoy desde la 4.7.2 y he vuelto a hacer la prueba de anoche y leo y escribo perfectamente sin que dmesg diga que el journaling está roto.
después, todavía en la 4.7.2, desmonto la ext3, y la chequeo y me dice que la partición está OK.

es cierto que con los paquetes que me dijiste, mejoró algo la cosa, pero no en lo principal: la escritura.

Yo propongo invertir la carga de la prueba jeje,,
me explico:

crea en un hd-externo una partición ext3, pero OJO!, No desde wifislax: Créala desde otra distribución...
la que quieras: algo más canónico (debian).... ubuntu,,,, o una linux-live de rescate de las muchas que existen...

y después, apagas, arrancas wifislax 4.10, una vez arrancado le conectas el hd-externo, lo montas, y
escribes:   # touch /root/prueba.txt

y mientras en otra consola con el dmesg controlas los mensajes...

Es que a mí me da, de que si el Ext3 lo has creado desde 4.10 no salte la liebre.
en cambio si lo creas desde una distro diferente, o más antigua, o más específica para rescates
te vas a llevar una sorpresa.... :)

Yo ya te digo que a la wifislax 4.7.2 le he puesto el paquete firefox actualizado y me va bien..
es posible que la 4.8 también gestione bien ext3 o incluso la 4.9,
pero como la que tenía a mano era la 4.7.2, y ha funcionado correctamente pues me doy por satisfecho.

Si haces ese experimento que digo, y te funciona bien, pues entonces será algún problema con el hardware de mi equipo
(por que ya tengo claro que el disco No tiene sectores malos, y que las particiones Ext3 están bien).

Saludos.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: USUARIONUEVO en 14-01-2015, 02:09 (Miércoles)
claro , tengo yo ahora que estar bajando debians y tal ..jajaja

nio de coña.


¿no es lo mismo si coges tu y haces una particion de 50 megas desde wifislax 4.10 e intenas escribir ?


mira que rapido ... tardas 1 minuto.

tampoco respondes a si el punto d ekontaje es

/media  o  /mnt

/media  a veces da problemas de escritura...por ejemplo-.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: barquerito en 14-01-2015, 14:41 (Miércoles)
A ver:

en wifislax 4.10

cuando el hd-externo lo enciendo despues de arrancada wifislax, al montarla lo hace en:

    /dev/sdc5 on /run/media/root/e27f9b55-1d7d-4738-ab83-9a23c3f84e41 type ext3 (rw,nosuid,nodev,uhelper=udisks2)


y si el hd-externo lo enciendo antes de arrancar wifislax, las auto-monta en:
    /dev/sdb5 on /mnt/sdb5 type ext3 (noatime,nodiratime,suid,dev,exec,async)

PERO en ambos casos en cuanto escribo en particion Ext3. salta la liebre y se pone en modo lectura.

--

He hecho esta misma comprobación con wifislax 4.7.2 y los puntos de montaje son los mismos,
la diferencia es que 4.7.2 sí me deja escribir en la Ext3. y cuando desmonto la chequeo y está OK.

----
seguiré probando cosas, pero no tengo muchas esperanzas...

no me explico qué gazapo anda por ahí.
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: CristianEdgardo en 14-01-2015, 16:36 (Miércoles)
 A mi desde live usb, me lee y escribe en ex3, en disco rígido sata interno, sin ningun problema..., probare un externo que tengo y te aviso... ;)
Título: Re: Problemas con Ext3 en Wifislax !!
Publicado por: CristianEdgardo en 20-01-2015, 02:21 (Martes)
Bueno, andar anda, es problema tuyo el tema de escribir el disco.


Loque ami me hace, en disco externo dos teras, es que, no me actualiza si copio una carpta, de un lado a otro, o muevo, ya sea en el mismo disco o de otro lado...

esto sedebera a algo!!! en  xfce