Autor Tema: No hay conexión inalámbrica detectada en wifislax  (Leído 1549 veces)

0 Usuarios y 1 Visitante están viendo este tema.

skepasti21

  • Visitante
No hay conexión inalámbrica detectada en wifislax
« en: 16-12-2016, 01:22 (Viernes) »
Hola, nuevo aquí, felicidades por su muy buen trabajo en wifislax. Estoy enfrentando un problema con la tecnología inalámbrica. Ya he buscado en el foro un caso como el mío, pero ninguna de las soluciones que encontré me cabía. Tengo wifislax -4-12-final en vmware en Windows 10, ya vmware herramientas instaladas y no puedo conseguirlo para ver mi adaptador inalámbrico (intel N-7260)
Aquí algunas pistas para entender mi situación ..
Código: [Seleccionar]
wifislax ~ # iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.
Código: [Seleccionar]
wifislax ~ # ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0C:29:8A:C0:14 
          inet6 addr: fe80::20c:29ff:fe8a:c014/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:10711 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5531 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10043786 (9.5 Mb)  TX bytes:464654 (453.7 Kb)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
Código: [Seleccionar]
wifislax ~ # lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:07.7 System peripheral: VMware Virtual Machine Communication Interface (rev 10)
00:0f.0 VGA compatible controller: VMware SVGA II Adapter
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01)
00:11.0 PCI bridge: VMware PCI bridge (rev 02)
00:15.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.7 PCI bridge: VMware PCI Express Root Port (rev 01)
02:00.0 USB controller: VMware USB1.1 UHCI Controller
02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
02:02.0 Multimedia audio controller: Ensoniq ES1371 / Creative Labs CT2518/ES1373 (rev 02)
02:03.0 USB controller: VMware USB2 EHCI Controller
Código: [Seleccionar]
wifislax ~ # airmon-ng


Interface       Chipset         Driver

Código: [Seleccionar]
wifislax ~ # airodump-ng

  Airodump-ng 1.2 rc4 r2858 - (C) 2006-2015 Thomas d'Otreppe
  http://www.aircrack-ng.org

  usage: airodump-ng <options> <interface>[,<interface>,...]

  Options:
      --ivs                 : Save only captured IVs
      --gpsd                : Use GPSd
      --write      <prefix> : Dump file prefix
      -w                    : same as --write
      --beacons             : Record all beacons in dump file
      --update       <secs> : Display update delay in seconds
      --showack             : Prints ack/cts/rts statistics
      -h                    : Hides known stations for --showack
      -f            <msecs> : Time in ms between hopping channels
      --berlin       <secs> : Time before removing the AP/client
                              from the screen when no more packets
                              are received (Default: 120 seconds)
      -r             <file> : Read packets from that file
      -x            <msecs> : Active Scanning Simulation
      --manufacturer        : Display manufacturer from IEEE OUI list
      --uptime              : Display AP Uptime from Beacon Timestamp
      --wps                 : Display WPS information (if any)
      --output-format
                  <formats> : Output format. Possible values:
                              pcap, ivs, csv, gps, kismet, netxml
      --ignore-negative-one : Removes the message that says
                              fixed channel <interface>: -1
      --write-interval
                  <seconds> : Output file(s) write interval in seconds

  Filter options:
      --encrypt   <suite>   : Filter APs by cipher suite
      --netmask <netmask>   : Filter APs by mask
      --bssid     <bssid>   : Filter APs by BSSID
      --essid     <essid>   : Filter APs by ESSID
      --essid-regex <regex> : Filter APs by ESSID using a regular
                              expression
      -a                    : Filter unassociated clients

  By default, airodump-ng hop on 2.4GHz channels.
  You can make it capture on other/specific channel(s) by using:
      --channel <channels>  : Capture on specific channels
      --band <abg>          : Band on which airodump-ng should hop
      -C    <frequencies>   : Uses these frequencies in MHz to hop
      --cswitch  <method>   : Set channel switching method
                    0       : FIFO (default)
                    1       : Round Robin
                    2       : Hop on last
      -s                    : same as --cswitch

      --help                : Displays this usage screen

No interface specified.
Código: [Seleccionar]
wifislax ~ # dmesg | tail
[ 2406.301973] usb 1-1: device descriptor read/64, error 18
[ 2406.672099] usb 1-1: new high-speed USB device number 5 using ehci-pci
[ 2406.703099] usb 1-1: Invalid ep0 maxpacket: 9
[ 2406.971595] usb 1-1: new high-speed USB device number 6 using ehci-pci
[ 2407.002234] usb 1-1: Invalid ep0 maxpacket: 9
[ 2407.011800] usb usb1-port1: unable to enumerate USB device
[ 4340.602082] e1000: eth0 NIC Link is Down
[ 4344.602585] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 4430.621749] e1000: eth0 NIC Link is Down
[ 4434.622623] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None


Estoy desesperado, he buscado todo el Internet sin éxito!