Seguridad Wireless - Wifi
Suite Seguridad Wireless => Live wifislax => Mensaje iniciado por: valencia2011 en 14-04-2012, 00:37 (Sábado)
-
Hola compis tengo wifislax 4 y tengo un modem huawei con el soft mobile parter el caso es que lo instale en wfslx y me reconoce el modem me sale la cobertura pero al darle a conectar me sale un mensaje de la conesion ha terminado pero no s conecta y he probado con kpp pero no me reconoce el modem me gustaria saber como podria soluionar el problema , gracias de antemano.
-
Si alguien sabe como puedo hacer para corregr el problema de la conexion agradeceria ya que no se que mas hacer.gracias.
-
No se si mi pregunta es una gran estupidez o nadie sabe contestarme aunq sea para deirme cualquier cosa pero raro q nadie sepa algo sobre mi pregunta , que ayudar no cuesta tanto.
-
hola
sinceramente lo he leído 3 veces y no tengo ni idea de a lo que te refieres. como no te expliques mejor poco te podran decir yo al menos no.
hola
"tengo un perro rojo, con un collar blanco, que cuando la ventana se abre sale agua del grifo".
lo mismo entiendo yo en lo que pones >:D
saludos
-
hola samson , te eplico tengo un modem usb para internet mobil de la marca huawei mod.. E173 en el cual sabras viene el soft en el usb para instalar , el caso es que al instalarlo el programa que lo controla se abre perfectamente y reconoce el modem , ya que me da hasta la potencia de la cobertura , pero cuando le doy a conectar me sale un mensaje LA CONEXION HA TERMINADO pero no conecto nada , y en otro pc con w7 si funciona y al darle a conectar sale en el mensaje , abriendo puertos , luego conectando y final conectado , pero no se por que no me funciona en wfxlax 4 .
-
hola
ahora si ves jejej
¿has activado el dhcp en wifislax?
saludos
pd
la verdad es que nunca he visto ese caso por aquí, así que no te podre ayudar mucho mas pero puede que sea por eso que al no obtener ip no te deje mantener la conexión abierta
-
La verdad es q no lo active , y de paso si no muxa molestia si me puedes decir como activarlo ya q no se muxo , gracias de antemano..
-
hola
te cuento como se hace en wifiway imagino que en slax sera igual pero de memoria no me lo se y el que tengo a mano ahora es wifiway.
entras en el menu K--------wifiway-----------gestor de conexiones-------------dhcp ip & dns Auto
y ya esta a ver si hay suerte
saludos
-
Si no encuentras lo que dice sanson
dhcpcd wlan0 (cambiando wlan0 por en nombre de la interfaz)
Yo hace 2 minutos tampoco sabía como se hacía, por eso he utilizado el buscador, si, ese botoncito con una lupa y un mundo en el que pone "buscar" y que está en la parte superior de la web.
-
hola compis lo habia encontrado tambien n el buscador y si las dos formas son validas y yo lo hago y me sale esto
dhcpcd[29676]: version 5.2.12 starting
dhcpcd[29676]: wlan0: using hwaddr (xx:xx:xx:xx:xx:xx)borrado....
dhcpcd[29676]: wlan0: executing `/lib/dhcpcd/dhcpcd-run-hooks', reason PREINIT
dhcpcd[29676]: wlan0: executing `/lib/dhcpcd/dhcpcd-run-hooks', reason NOCARRIER
dhcpcd[29676]: wlan0: waiting for carrier
dhcpcd[29676]: timed out
dhcpcd[29676]: allowing 8 seconds for IPv4LL timeout
dhcpcd[29676]: timed out
y no me conecta el usb moden todo igual..
-
hola
pues ni idea.
nunca he usado un bicho de eso a ver si alguien tiene alguno y te puede echar un cable.
salduos
-
vale , gracias igualmente seguire buscando , salu2.
-
hola compis lo habia encontrado tambien n el buscador y si las dos formas son validas y yo lo hago y me sale esto
dhcpcd[29676]: version 5.2.12 starting
dhcpcd[29676]: wlan0: using hwaddr (xx:xx:xx:xx:xx:xx)borrado....
dhcpcd[29676]: wlan0: executing `/lib/dhcpcd/dhcpcd-run-hooks', reason PREINIT
dhcpcd[29676]: wlan0: executing `/lib/dhcpcd/dhcpcd-run-hooks', reason NOCARRIER
dhcpcd[29676]: wlan0: waiting for carrier
dhcpcd[29676]: timed out
dhcpcd[29676]: allowing 8 seconds for IPv4LL timeout
dhcpcd[29676]: timed out
y no me conecta el usb moden todo igual..
Si es un modem usb no creo que te lo detecte como wlan0..
Abre la consola y ejecuta iwconfig, te deveria de salir una "usb0", si es así ejecuta "dhcpcd usb0" y dale al boton de conectar en el software del modem. Haciendo eso deveria de funcionar.
-
y si no ejecuta la utilidad , llamandola desde consola, para ver si canta algun mensaje de error.
el dhcp en wifislax esta automatico , por eso no necesitais darle al arrancar
en wifiway estaba parado por defecto en wifislax no.
-
y si no ejecuta la utilidad , llamandola desde consola, para ver si canta algun mensaje de error.
el dhcp en wifislax esta automatico , por eso no necesitais darle al arrancar
en wifiway estaba parado por defecto en wifislax no.
Pues yo cuando utilizo el movil como modem tengo que ejecutar dhcpcd usb0 para tener conexión, no me asigna una ip automaticamente. :-\
-
y si no ejecuta la utilidad , llamandola desde consola, para ver si canta algun mensaje de error.
el dhcp en wifislax esta automatico , por eso no necesitais darle al arrancar
en wifiway estaba parado por defecto en wifislax no.
Pues yo cuando utilizo el movil como modem tengo que ejecutar dhcpcd usb0 para tener conexión, no me asigna una ip automaticamente. :-\
OK ;), todos los dias se aprende algo.
-
Hola yo devo estar gafado , he probado todo lo q me han dicho , con el comando dhcpcd usb0 me sale el siguiente mensaje:
wifislax ~ # dhcpcd usb0
dhcpcd[3179]: version 5.2.12 starting
dhcpcd[3179]: usb0: interface not found or invalid
y con el iwconfig no me recono como usb0 mas bie no me reconoce como interfaz
wifislax ~ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated
Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
p.d en el programa del dispositivo me sale que esta conectado en el puerto ttyUSB_utps_pcui .
-
Pues si no te sale al ejecutar iwconfig.. esto va a ser un tema de drivers.
Pon en la consola lsusb y pega aqui los resultados para que veamos que chip yeva el modem.
-
wifislax ~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0ac8:c33f Z-Star Microelectronics Corp. Webcam
Bus 001 Device 006: ID 12d1:1c05 Huawei Technologies Co., Ltd.
Esto es lo que me sale.
-
Vamos a hacer una prueba, mete este modulo en la carpeta modules, inicia wifislax con el modem huawei enchufado al puerto usb y pon iwconfig a ver si te lo detecta.
http://www.4shared.com/file/jXx_q73F/usb_modeswit_config_huawei_12d.html
-
hola desinstalare el que tengo y instalo este ya q lo tengo en hd ,
-
podria ser firmware...
revisa el dmesg
en una consola escribe mdseg ..y ve buscando algun error.
-
wifislax ~ # dmesg
ing latency timer to 64
[ 0.991722] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.991815] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.991975] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.992673] hub 5-0:1.0: USB hub found
[ 0.992763] hub 5-0:1.0: 2 ports detected
[ 0.993311] usbcore: registered new interface driver uas
[ 0.993393] Initializing USB Mass Storage driver...
[ 0.993610] usbcore: registered new interface driver usb-storage
[ 0.993691] USB Mass Storage support registered.
[ 0.993868] usbcore: registered new interface driver ums-alauda
[ 0.994066] usbcore: registered new interface driver ums-cypress
[ 0.994240] usbcore: registered new interface driver ums-datafab
[ 0.994413] usbcore: registered new interface driver ums-freecom
[ 0.994585] usbcore: registered new interface driver ums-isd200
[ 0.994760] usbcore: registered new interface driver ums-jumpshot
[ 0.994937] usbcore: registered new interface driver ums-karma
[ 0.995154] usbcore: registered new interface driver ums-onetouch
[ 0.995331] usbcore: registered new interface driver ums-sddr09
[ 0.995505] usbcore: registered new interface driver ums-sddr55
[ 0.995680] usbcore: registered new interface driver ums-usbat
[ 0.996003] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.998641] i8042: Detected active multiplexing controller, rev 1.1
[ 1.000978] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.001151] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.001303] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.001449] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.001594] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.002296] device-mapper: uevent: version 1.0.3
[ 1.002859] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 1.003505] EISA: Probing bus 0 at eisa.0
[ 1.003587] EISA: Cannot allocate resource for mainboard
[ 1.003666] Cannot allocate resource for EISA slot 1
[ 1.003744] Cannot allocate resource for EISA slot 2
[ 1.003821] Cannot allocate resource for EISA slot 3
[ 1.003899] Cannot allocate resource for EISA slot 4
[ 1.003976] Cannot allocate resource for EISA slot 5
[ 1.004075] Cannot allocate resource for EISA slot 6
[ 1.004152] Cannot allocate resource for EISA slot 7
[ 1.004230] Cannot allocate resource for EISA slot 8
[ 1.004306] EISA: Detected 0 cards.
[ 1.005121] cpuidle: using governor ladder
[ 1.006523] cpuidle: using governor menu
[ 1.007111] usbcore: registered new interface driver usbhid
[ 1.007194] usbhid: USB HID core driver
[ 1.007430] TCP cubic registered
[ 1.007505] NET: Registered protocol family 17
[ 1.007595] Registering the dns_resolver key type
[ 1.007704] Using IPI No-Shortcut mode
[ 1.008601] registered taskstats version 1
[ 1.009270] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.035000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.163677] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133
[ 1.163783] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.170781] ata1.00: configured for UDMA/133
[ 1.171180] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5
[ 1.171871] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.172188] sd 0:0:0:0: [sda] Write Protect is off
[ 1.172279] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.172364] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.205205] sda: sda1 sda2 < sda5 sda6 >
[ 1.206631] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.206748] md: Waiting for all devices to be available before autodetect
[ 1.206831] md: If you don't use raid, use raid=noautodetect
[ 1.207428] md: Autodetecting RAID arrays.
[ 1.207507] md: Scanned 0 and added 0 devices.
[ 1.207582] md: autorun ...
[ 1.207653] md: ... autorun DONE.
[ 1.215079] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.215169] EXT4-fs (sda1): write access will be enabled during recovery
[ 1.285071] usb 1-8: new high speed USB device number 2 using ehci_hcd
[ 1.487166] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 1.487270] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 869518
[ 1.487328] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 869362
[ 1.487450] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 869521
[ 1.502279] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 869520
[ 1.502330] EXT4-fs (sda1): 4 orphan inodes deleted
[ 1.502411] EXT4-fs (sda1): recovery complete
[ 1.784639] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.784809] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 1.784973] Freeing unused kernel memory: 468k freed
[ 1.785299] BFS CPU scheduler v0.415 by Con Kolivas.
[ 2.848475] udev[1437]: starting version 165
[ 3.343228] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.343372] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.343513] r8169 0000:03:00.0: setting latency timer to 64
[ 3.343623] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[ 3.344004] r8169 0000:03:00.0: eth0: RTL8102e at 0xf805a000, 00:24:54:39:34:ce, XID 04c00000 IRQ 42
[ 3.449307] rtc_cmos 00:08: RTC can wake from S4
[ 3.449853] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 3.450133] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.450231] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.486797] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.514202] cfg80211: Calling CRDA to update world regulatory domain
[ 3.524240] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.524445] ACPI: Lid Switch [LID0]
[ 3.524745] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 3.524867] ACPI: Power Button [PWRB]
[ 3.525184] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 3.525308] ACPI: Sleep Button [SLPB]
[ 3.525581] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.525699] ACPI: Power Button [PWRF]
[ 3.562571] Linux agpgart interface v0.103
[ 3.611175] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.612480] ACPI: AC Adapter [ADP1] (on-line)
[ 3.646522] Linux media interface: v0.10
[ 3.703287] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.703427] ACPI: Battery Slot [BAT1] (battery present)
[ 3.732691] intel_rng: FWH not detected
[ 3.733812] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.733912] ACPI: Thermal Zone [TZ00] (23 C)
[ 3.745137] ACPI: Fan [FAN0] (off)
[ 3.756513] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 3.756960] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 3.757327] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 3.757819] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.780817] samsung_laptop: found laptop model 'N130'
[ 3.817161] leds_ss4200: no LED devices found
[ 3.846287] ACPI: acpi_idle yielding to intel_idle
[ 3.865909] Linux video capture interface: v2.00
[ 3.875112] acpi device:04: registered as cooling_device3
[ 3.875637] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.878362] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.954659] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.954688] uvcvideo: Found UVC 1.00 device WebCam SCB-0340N (0ac8:c33f)
[ 3.954860] ath9k 0000:02:00.0: setting latency timer to 64
[ 3.974766] input: WebCam SCB-0340N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input6
[ 3.975320] usbcore: registered new interface driver uvcvideo
[ 3.975415] USB Video Class driver (1.1.1)
[ 3.991328] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.991752] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.991813] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.992110] [drm] Initialized drm 1.1.0 20060810
[ 4.196775] hda_codec: ALC269: BIOS auto-probing.
[ 4.204801] ath: EEPROM regdomain: 0x65
[ 4.204811] ath: EEPROM indicates we should expect a direct regpair map
[ 4.204822] ath: Country alpha2 being used: 00
[ 4.204827] ath: Regpair used: 0x65
[ 4.207865] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.218505] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.231802] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.231904] i915 0000:00:02.0: setting latency timer to 64
[ 4.318233] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.318335] [drm] Driver supports precise vblank timestamp query.
[ 4.318604] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.322734] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 4.323289] Registered led device: ath9k-phy0
[ 4.323321] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8340000, irq=16
[ 4.526138] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 4.567391] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 4.641358] [drm] initialized overlay support
[ 4.657814] mousedev: PS/2 mouse device common for all mice
[ 4.662737] fbcon: inteldrmfb (fb0) is primary device
[ 5.109381] cfg80211: World regulatory domain updated:
[ 5.109388] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.109395] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 5.109401] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 5.131886] Console: switching to colour frame buffer device 128x37
[ 5.140068] fb0: inteldrmfb frame buffer device
[ 5.140074] drm: registered panic notifier
[ 5.140157] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.459410] Adding 2465940k swap on /dev/sda5. Priority:1 extents:1 across:2465940k
[ 6.033157] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 6.041092] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.216114] kjournald starting. Commit interval 5 seconds
[ 6.216470] EXT3-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
[ 6.224233] EXT3-fs (sda6): using internal journal
[ 6.228174] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 11.406637] NET: Registered protocol family 10
[ 14.262207] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.724879] start_kdeinit (2169): /proc/2169/oom_adj is deprecated, please use /proc/2169/oom_score_adj instead.
[ 20.089109] r8169 0000:03:00.0: eth0: link down
[ 20.089640] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 83.275913] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 83.368594] r8169 0000:03:00.0: eth0: link down
[ 83.368984] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 83.513386] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 86.709431] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 86.851367] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 86.864460] wlan0: authenticated
[ 86.864523] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 86.883768] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 86.883785] wlan0: associated
[ 86.884517] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 97.314072] wlan0: no IPv6 routers present
[ 217.822063] usb 1-1: new high speed USB device number 3 using ehci_hcd
[ 218.181917] scsi2 : usb-storage 1-1:1.0
[ 218.182544] scsi3 : usb-storage 1-1:1.1
[ 219.183196] scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 219.185364] sr0: scsi-1 drive
[ 219.185376] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 219.187362] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 219.187835] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 219.197750] scsi 3:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 219.198575] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 219.216736] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 230.122125] usb 1-1: USB disconnect, device number 3
[ 235.868134] usb 1-1: new high speed USB device number 4 using ehci_hcd
[ 236.224177] scsi4 : usb-storage 1-1:1.3
[ 236.224934] scsi5 : usb-storage 1-1:1.4
[ 236.331827] usbcore: registered new interface driver usbserial
[ 236.331887] USB Serial support registered for generic
[ 236.334921] usbcore: registered new interface driver usbserial_generic
[ 236.334933] usbserial: USB Serial Driver core
[ 236.341884] USB Serial support registered for GSM modem (1-port)
[ 236.343242] option 1-1:1.0: GSM modem (1-port) converter detected
[ 236.343802] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 236.343860] option 1-1:1.1: GSM modem (1-port) converter detected
[ 236.344686] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 236.344747] option 1-1:1.2: GSM modem (1-port) converter detected
[ 236.345251] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 236.345366] usbcore: registered new interface driver option
[ 236.345374] option: v0.7.2:USB Driver for GSM modems
[ 237.225562] scsi 4:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 237.226374] scsi 5:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 237.227175] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 237.231333] sr0: scsi-1 drive
[ 237.233577] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 237.234421] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 237.234944] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 239.231702] usbcore: registered new interface driver huawei_ether
[ 435.015582] wlan0: deauthenticating from 00:1a:2b:42:98:22 by local choice (reason=3)
[ 435.046817] cfg80211: Calling CRDA to update world regulatory domain
[ 435.058028] cfg80211: World regulatory domain updated:
[ 435.058037] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 435.058048] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 435.058056] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 435.131631] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 547.683853] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 547.800057] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 547.848463] r8169 0000:03:00.0: eth0: link down
[ 547.848999] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 547.984790] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 550.329033] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 550.334756] wlan0: authenticated
[ 550.334849] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 550.338115] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 550.338133] wlan0: associated
[ 550.338838] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 560.418077] wlan0: no IPv6 routers present
[ 1182.971117] wlan0: deauthenticating from 00:1a:2b:42:98:22 by local choice (reason=3)
[ 1182.990823] cfg80211: Calling CRDA to update world regulatory domain
[ 1183.002132] cfg80211: World regulatory domain updated:
[ 1183.002142] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1183.002153] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 1183.002161] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 1183.075651] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1229.259198] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1229.371190] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1229.417388] r8169 0000:03:00.0: eth0: link down
[ 1229.417777] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1229.548490] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1231.953365] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 1231.958117] wlan0: authenticated
[ 1231.958220] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 1231.962503] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 1231.962520] wlan0: associated
[ 1231.963303] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1242.866056] wlan0: no IPv6 routers present
[ 1657.856485] usb 1-1: USB disconnect, device number 4
[ 1657.856678] option: option_instat_callback: error -108
[ 1657.857271] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 1657.857356] option 1-1:1.0: device disconnected
[ 1657.858181] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 1657.858253] option 1-1:1.1: device disconnected
[ 1657.861676] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 1657.861731] option 1-1:1.2: device disconnected
[ 1673.790121] usb 1-3: new high speed USB device number 5 using ehci_hcd
[ 1674.149660] scsi6 : usb-storage 1-3:1.0
[ 1674.153266] scsi7 : usb-storage 1-3:1.1
[ 1675.153041] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1675.155112] sr0: scsi-1 drive
[ 1675.157554] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1675.158195] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 1675.163972] scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 1675.164812] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 1675.168195] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 1689.737744] usb 1-3: USB disconnect, device number 5
[ 1695.481080] usb 1-3: new high speed USB device number 6 using ehci_hcd
[ 1695.839235] option 1-3:1.0: GSM modem (1-port) converter detected
[ 1695.839820] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 1695.840909] option 1-3:1.1: GSM modem (1-port) converter detected
[ 1695.841638] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 1695.841933] option 1-3:1.2: GSM modem (1-port) converter detected
[ 1695.842669] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB3
[ 1695.843057] scsi8 : usb-storage 1-3:1.3
[ 1695.843715] scsi9 : usb-storage 1-3:1.4
[ 1696.844395] scsi 9:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 1696.844405] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1696.845675] sd 9:0:0:0: Attached scsi generic sg1 type 0
[ 1696.848588] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 1696.857229] sr0: scsi-1 drive
[ 1696.859132] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 1696.859618] sr 8:0:0:0: Attached scsi generic sg2 type 5
[ 1967.051269] cfg80211: Calling CRDA to update world regulatory domain
[ 1967.066886] cfg80211: World regulatory domain updated:
[ 1967.066896] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1967.066907] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 1967.066916] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 1968.138252] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 1968.147229] wlan0: authenticated
[ 1968.147295] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 1968.163111] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 1968.163121] wlan0: associated
[ 1968.222066] wlan0: deauthenticating from 00:1a:2b:42:98:22 by local choice (reason=3)
[ 1968.241788] cfg80211: Calling CRDA to update world regulatory domain
[ 1968.253103] cfg80211: World regulatory domain updated:
[ 1968.253113] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1968.253124] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 1968.253132] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 1968.324875] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1968.389530] r8169 0000:03:00.0: eth0: link down
[ 1968.389925] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2091.838763] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2114.325566] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2114.378258] r8169 0000:03:00.0: eth0: link down
[ 2114.378646] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2114.517185] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2116.880090] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2116.882207] wlan0: authenticated
[ 2116.882295] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 2116.884708] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 2116.884725] wlan0: associated
[ 2116.885507] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2127.010039] wlan0: no IPv6 routers present
[ 2182.457618] wlan0: deauthenticated from 00:1a:2b:42:98:22 (Reason: 7)
[ 2182.483628] cfg80211: Calling CRDA to update world regulatory domain
[ 2182.502645] cfg80211: World regulatory domain updated:
[ 2182.502657] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2182.502668] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 2182.502676] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 2183.569632] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2183.573553] wlan0: authenticated
[ 2183.573665] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 2183.590070] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 2183.590088] wlan0: associated
[ 2185.149742] wlan0: deauthenticating from 00:1a:2b:42:98:22 by local choice (reason=3)
[ 2185.161767] cfg80211: Calling CRDA to update world regulatory domain
[ 2185.173875] cfg80211: World regulatory domain updated:
[ 2185.173884] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2185.173894] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 2185.173903] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 2185.267902] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2185.343986] r8169 0000:03:00.0: eth0: link down
[ 2185.344486] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2225.196484] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2225.298215] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2225.364255] r8169 0000:03:00.0: eth0: link down
[ 2225.364887] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2225.534631] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2227.926123] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2227.928186] wlan0: authenticated
[ 2227.928282] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 2228.128093] wlan0: associate with 00:1a:2b:42:98:22 (try 2)
[ 2228.328088] wlan0: associate with 00:1a:2b:42:98:22 (try 3)
[ 2228.332096] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 2228.332115] wlan0: associated
[ 2228.332724] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2231.063275] cfg80211: Calling CRDA to update world regulatory domain
[ 2231.076852] cfg80211: World regulatory domain updated:
[ 2231.076863] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2231.076874] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 2231.076884] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 2232.158767] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2232.358118] wlan0: authenticate with 00:1a:2b:42:98:22 (try 2)
[ 2232.558120] wlan0: authenticate with 00:1a:2b:42:98:22 (try 3)
[ 2232.758130] wlan0: authentication with 00:1a:2b:42:98:22 timed out
[ 2239.026068] wlan0: no IPv6 routers present
[ 2243.138285] wlan0: direct probe to 00:1a:2b:42:98:22 (try 1/3)
[ 2243.141945] wlan0: direct probe responded
[ 2243.151069] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2243.351106] wlan0: authenticate with 00:1a:2b:42:98:22 (try 2)
[ 2243.551054] wlan0: authenticate with 00:1a:2b:42:98:22 (try 3)
[ 2243.751132] wlan0: authentication with 00:1a:2b:42:98:22 timed out
[ 2254.116750] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2254.118848] wlan0: authenticated
[ 2254.118906] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 2254.121274] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 2254.121291] wlan0: associated
[ 2254.609702] wlan0: deauthenticating from 00:1a:2b:42:98:22 by local choice (reason=3)
[ 2254.624811] cfg80211: Calling CRDA to update world regulatory domain
[ 2254.639180] cfg80211: World regulatory domain updated:
[ 2254.639191] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2254.639201] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 2254.639210] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 2256.712874] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2269.874884] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2269.926068] r8169 0000:03:00.0: eth0: link down
[ 2269.926616] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2270.075873] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2272.495035] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2272.501687] wlan0: authenticated
[ 2272.501762] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 2272.701106] wlan0: associate with 00:1a:2b:42:98:22 (try 2)
[ 2272.901104] wlan0: associate with 00:1a:2b:42:98:22 (try 3)
[ 2273.101121] wlan0: association with 00:1a:2b:42:98:22 timed out
[ 2289.430054] wlan0: direct probe to 00:1a:2b:42:98:22 (try 1/3)
[ 2289.439218] wlan0: direct probe responded
[ 2289.444107] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2289.644127] wlan0: authenticate with 00:1a:2b:42:98:22 (try 2)
[ 2289.646849] wlan0: authenticated
[ 2289.646946] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 2289.846094] wlan0: associate with 00:1a:2b:42:98:22 (try 2)
[ 2289.849340] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 2289.849350] wlan0: associated
[ 2289.849922] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2299.922073] wlan0: no IPv6 routers present
[ 2316.639642] wlan0: deauthenticating from 00:1a:2b:42:98:22 by local choice (reason=3)
[ 2316.656800] cfg80211: Calling CRDA to update world regulatory domain
[ 2316.668559] cfg80211: World regulatory domain updated:
[ 2316.668569] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2316.668580] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[ 2316.668589] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[ 2321.381852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2330.351673] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2330.408417] r8169 0000:03:00.0: eth0: link down
[ 2330.408950] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2330.581263] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2332.961068] wlan0: authenticate with 00:1a:2b:42:98:22 (try 1)
[ 2332.963210] wlan0: authenticated
[ 2332.963280] wlan0: associate with 00:1a:2b:42:98:22 (try 1)
[ 2332.965681] wlan0: RX AssocResp from 00:1a:2b:42:98:22 (capab=0x411 status=0 aid=3)
[ 2332.965699] wlan0: associated
[ 2332.966444] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2343.666062] wlan0: no IPv6 routers present
[ 3158.668973] usb 1-3: USB disconnect, device number 6
[ 3158.669223] option: option_instat_callback: error -108
[ 3158.669770] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 3158.669841] option 1-3:1.0: device disconnected
[ 3158.670558] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 3158.670631] option 1-3:1.1: device disconnected
[ 3158.671481] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 3158.671534] option 1-3:1.2: device disconnected
[ 3170.435118] usb 1-3: new high speed USB device number 7 using ehci_hcd
[ 3170.564204] scsi10 : usb-storage 1-3:1.0
[ 3171.567727] scsi 10:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 0
[ 3171.580523] sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[ 3171.582238] sr 10:0:0:0: Attached scsi CD-ROM sr0
[ 3171.583145] sr 10:0:0:0: Attached scsi generic sg1 type 5
[ 3184.106444] sr0: CDROM (ioctl) error, command: cdb[0]=0x52 52 01 00 00 00 01 00 00 08 00
[ 3184.106492] sr: Sense Key : 0x4 [current]
[ 3184.106508] sr: ASC=0x0 ASCQ=0x0
[ 3345.224960] usb 1-3: USB disconnect, device number 7
[ 3406.725143] usb 1-3: new high speed USB device number 8 using ehci_hcd
[ 3406.855234] scsi11 : usb-storage 1-3:1.0
[ 3407.858438] scsi 11:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 0
[ 3407.871417] sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[ 3407.872416] sr 11:0:0:0: Attached scsi CD-ROM sr0
[ 3407.876137] sr 11:0:0:0: Attached scsi generic sg1 type 5
[ 3420.123528] sr0: CDROM (ioctl) error, command: cdb[0]=0x52 52 01 00 00 00 01 00 00 08 00
[ 3420.123576] sr: Sense Key : 0x4 [current]
[ 3420.123594] sr: ASC=0x0 ASCQ=0x0
[ 3461.438905] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 3461.442133] ISOFS: changing to secondary root
[ 3731.313718] usb 1-3: USB disconnect, device number 8
[ 3825.399098] usb 1-3: new high speed USB device number 9 using ehci_hcd
[ 3825.760177] scsi12 : usb-storage 1-3:1.0
[ 3825.761301] scsi13 : usb-storage 1-3:1.1
[ 3826.762391] scsi 12:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 3826.762797] scsi 13:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 3826.764774] sr0: scsi-1 drive
[ 3826.765753] sr 12:0:0:0: Attached scsi CD-ROM sr0
[ 3826.769454] sr 12:0:0:0: Attached scsi generic sg1 type 5
[ 3826.770719] sd 13:0:0:0: Attached scsi generic sg2 type 0
[ 3826.779341] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[ 3838.003587] usb 1-3: USB disconnect, device number 9
[ 3843.739123] usb 1-3: new high speed USB device number 10 using ehci_hcd
[ 3844.096223] option 1-3:1.0: GSM modem (1-port) converter detected
[ 3844.097381] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 3844.097702] option 1-3:1.1: GSM modem (1-port) converter detected
[ 3844.098720] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 3844.098994] option 1-3:1.2: GSM modem (1-port) converter detected
[ 3844.099745] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB4
[ 3844.100161] scsi14 : usb-storage 1-3:1.3
[ 3844.100704] scsi15 : usb-storage 1-3:1.4
[ 3845.101492] scsi 14:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 3845.101509] scsi 15:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 3845.102317] sd 15:0:0:0: Attached scsi generic sg1 type 0
[ 3845.105094] sd 15:0:0:0: [sdb] Attached SCSI removable disk
[ 3845.110330] sr0: scsi-1 drive
[ 3845.112492] sr 14:0:0:0: Attached scsi CD-ROM sr0
[ 3845.112987] sr 14:0:0:0: Attached scsi generic sg2 type 5
-
Hola igual es una tonteria pero segun veo podriaser que lo detecta como cdrom y no como modem , que te parece y si es asi no se como arreglarlo.
-
leyendo esto
http://raagpc.blogspot.com.es/2011/07/odisea-3g-huawei-e173.html
fijate que tu tienes usb0 usb1 ...asi creo que llevas dos o 3..asi que deberias probar todos..
cuando detectes cual es el que funciona...
relincar todos los ttyusbX hacia el que funcione.
en el hilo que te puse ponen como crear una regla udev , para que en arranque se crren directamente los simbolicos hacie l que te funciona.
debes identificar primero cual de todas las ttyusb es la buena.
-
@valencia2011 Que vas a desinstalar?? no desinstales el sorftware del modem que esto es otra cosa diferente, si lo tienes instalado en HD utiliza el Instalador de modulos HDD que esta en menu de inicio > sistema y luego reinica el equipo con el modem conectado y pon iwconfig a ver si lo detecta.
@USUARIONUEVO puede ser lo que tu dices, aunque he estado lellendo porai que el problema es que esos dispositivos tienen un lector de tarjetas y al conectarlo el sistema detecta el lector y no el modem.
-
Hola igual es una tonteria pero segun veo podriaser que lo detecta como cdrom y no como modem , que te parece y si es asi no se como arreglarlo.
Has probado el modulo que te e puesto??
-
[ 3844.097381] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 3844.097702] option 1-3:1.1: GSM modem (1-port) converter detected
[ 3844.098720] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 3844.098994] option 1-3:1.2: GSM modem (1-port) converter detected
[ 3844.099745] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB4
hay que ver cual de todos es el bueno
ttyUSB0
ttyUSB1
ttyUSB4
-
veo que en otros intentos,,te dio otro numeros
[ 236.343802] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 236.343860] option 1-1:1.1: GSM modem (1-port) converter detected
[ 236.344686] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 236.344747] option 1-1:1.2: GSM modem (1-port) converter detected
[ 236.345251] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
-
dhcpcd usb0
dhcpcd usb1
dhcpcd usb2
dhcpcd usb3
dhcpcd usb4
a ver si alguno canta.
-
Hola igual es una tonteria pero segun veo podriaser que lo detecta como cdrom y no como modem , que te parece y si es asi no se como arreglarlo.
Has probado el modulo que te e puesto??
Hola he probadoel modulo que me diste , te explico como lo hize , viene en paquete debian lo converti en xzm y lo instale lo reinicie con el modem y nada de nada ,,,
-
dhcpcd usb0
dhcpcd usb1
dhcpcd usb2
dhcpcd usb3
dhcpcd usb4
a ver si alguno canta.
He provado todos y nada :
wifislax ~ # dhcpcd usb0
dhcpcd[5210]: version 5.2.12 starting
dhcpcd[5210]: usb0: interface not found or invalid
wifislax ~ # dhcpcd usb1
dhcpcd[5355]: version 5.2.12 starting
dhcpcd[5355]: usb1: interface not found or invalid
wifislax ~ # dhcpcd usb2
dhcpcd[5445]: version 5.2.12 starting
dhcpcd[5445]: usb2: interface not found or invalid
wifislax ~ # dhcpcd usb3
dhcpcd[5593]: version 5.2.12 starting
dhcpcd[5593]: usb3: interface not found or invalid
wifislax ~ # dhcpcd usb4
dhcpcd[5721]: version 5.2.12 starting
dhcpcd[5721]: usb4: interface not found or invalid
-
Hola igual es una tonteria pero segun veo podriaser que lo detecta como cdrom y no como modem , que te parece y si es asi no se como arreglarlo.
Has probado el modulo que te e puesto??
Hola he probadoel modulo que me diste , te explico como lo hize , viene en paquete debian lo converti en xzm y lo instale lo reinicie con el modem y nada de nada ,,,
Paquete debian?? yo te he puesto un modulo xzm
es este http://www.4shared.com/get/jXx_q73F/usb_modeswit_config_huawei_12d.html
ese es el que has instalado?
-
Despues de reiniciar con el modulo instalado haz iwconfig a ver si ahora te lo detecta como usbX
-
Despues de reiniciar con el modulo instalado haz iwconfig a ver si ahora te lo detecta como usbX
Lo he instalado , reiniciado pero nada de nada me sale igual
wifislax ~ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
-
prueba con
ifconfig
a ver si hay algo
-
@USUARIONUEVO puede ser lo que tu dices, aunque he estado lellendo porai que el problema es que esos dispositivos tienen un lector de tarjetas y al conectarlo el sistema detecta el lector y no el modem.
[/quote]
Esto tambien lo he leido por ahi , por eso he puesto aunq equicado que lo reconocia como cdrom pero queria decir lo del lector de tarjetas .
-
prueba con
ifconfig
a ver si hay algo
wifislax ~ # ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:xx:xx:xx:xx
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:42 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:26:xx:xx:xx:xx
inet addr:192.168.1.xxx Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::226:b6ff:fe67:7fd/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2222 errors:0 dropped:0 overruns:0 frame:0
TX packets:1925 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:682138 (666.1 Kb) TX bytes:429801 (419.7 Kb)
-
Lo raro es que introdusco el moden y el sofware lo detecta se incicia automatc.. coje cobertura pero a la hora de conectar pues nada..
-
el problema principal es que el sistema NO VE EL DISPOSITIVO.
mientras no aparezca como usbX , no se va a hacer na.
-
no se si servira de algo
http://help.frontlinesms.com/manuals/1.6.16.3/troubleshooting.htm
-
http://projects.gnome.org/NetworkManager/
-
puedo probarlo pero creo que no va valer , porque el wifslax trae algo parecido que es el kppp y cuando voy a configurar el modem hay una opcion para testearlo y cuando le doy me dice que no puede abrir el modem y nada lo q el sistema no reonoce el modem como tal..
-
Yo creo que la cosa va por aquí http://digitalgotcha.blogspot.com.es/2011/11/get-vodafone-3g-dongle-huawei-k3770.html
-
Yo creo que la cosa va por aquí http://digitalgotcha.blogspot.com.es/2011/11/get-vodafone-3g-dongle-huawei-k3770.html
Pues si la verdad parece que tiene sentido lo que explica , segun entendi el 1 primer paso lo tengo que es lo de la identificacion 12id, .... lo que necesito ahora es el wdial o el sakis 3g.
Es asi verdad?
-
hola leyendo yo dreo q es por culpa del lector de tajetas y he encontrdo esto pero me pierdo mas q un pulpo en un garaje
http://crysol.org/es/node/1217
-
hola leyendo yo dreo q es por culpa del lector de tajetas y he encontrdo esto pero me pierdo mas q un pulpo en un garaje
http://crysol.org/es/node/1217
Lo que pone ahí ya lo as probado y no te ha funcionado.
El modulo txz que te pasé antes era eso, el usb-modeswitch con el ivman y los archivos de configuración.
As probado ya con sakis3g??
-
Hola compañero la verdad yo se mu poco de linux intnte me descargue lo de sakis3g lo que hize fue descomprimir y pasar a xzm que es lo q hago siempre y luego instalar con el comando xzm2dir pero no pasa nada solo me pone el archivo en l diretorio raiz . siento mi ignorancia..
-
joder la verdad q ya me trae loco no hay manera de q ande este cacharrito-
-
El archivo sakis3g que descomprimiste lo tienes que meter en /usr/bin
Para conectar el modem:
sakis3g connect MODEM='12d1:1c05' APN='ac.vodafone.es' USBDRIVER='option' USBINTERFACE='0'
Tendras que cambiar donde pone 'ac.vodafone.es' por el APN de tu compañía.
Aquí te dejo una lista de las APN de operadoras en españa:
http://wiki.bandaancha.st/APN_de_las_operadoras_para_configurar_el_m%C3%B3dem_de_Internet_m%C3%B3vil_3G
-
Hola compi en primer lugar decirte gracias por tu paciencia y dedicacion , bueno he hecho lo q me has dicho he metio el archivo y hepuesto el comando y me qdo asi :
wifislax ~ # sakis3g connect MODEM='12d1:1c05' APN='internet.mundo-r.com' USBDRIVER='option' USBINTERFACE='0
>
nada mas me ha salido y hago ifcong y nada tampoco se conecta.
-
Hola compi en primer lugar decirte gracias por tu paciencia y dedicacion , bueno he hecho lo q me has dicho he metio el archivo y hepuesto el comando y me qdo asi :
wifislax ~ # sakis3g connect MODEM='12d1:1c05' APN='internet.mundo-r.com' USBDRIVER='option' USBINTERFACE='0'
>
nada mas me ha salido y hago ifcong y nada tampoco se conecta.
Te falta la comilla esa que te he puesto en rojo para completar el comando.
-
wifislax ~ # sakis3g connect MODEM='12d1:1c05' APN='internet.mundo-r.com' USBDRIVER='option' USBINTERFACE='0'
bash: /usr/bin/sakis3g: Permiso denegado
Bueno ahora me sale permiso denegado si es esto esta gafado ..
-
Bueno vamos mejorando he ido al archivo de sakis y le marque la opcion ejecutable por lo menos ahota me sale esto
wifislax ~ # sakis3g connect MODEM='12d1:1c05' APN='internet.mundo-r.com' USBDRIVER='option' USBINTERFACE='0'
Already selected value APN="internet.mundo-r.com". Is not valid.
Please select APN by using APN variable, or by enabling interactive mode.
$ /usr/bin/sakis3g --interactive "connect" "MODEM=12d1:1c05" "APN=internet.mundo-r.com" "USBDRIVER=option" "USBINTERFACE=0"
Available options are:
airtelnet.es Vodafone (airtelnet.es)
gprs.pepephone.es Pepephone (gprs.pepephone.es)
CUSTOM_APN Custom APN...
Example:
$ /usr/bin/sakis3g APN="airtelnet.es"
y poniendo solo sakis3g me sale esto
wifislax ~ # sakis3g
Sakis 3G All-in-one script - Version 0.2.0e
(c) Sakis Dimopoulos 2009, 2010 under GNU GPL v2
Usage:
sakis3g [actors] [switches] [variables]
Sakis3G is a shell script which is supposed to work out-of-the-box for establishing a 3G connection with any combination of modem or operator.
NOTE: This script requires root priviledges to properly work. If not executed from root, it will try to acquire them.
Common actors are:
connect - Attempts to establish 3G connection.
disconnect - Stops all active PPP connections.
toggle - Attempts to establish 3G connection. If already connected, it disconnects instead.
reconnect - Attempts to establish 3G connection. If already connected, it first disconnects and then attempts.
start - Same as connect. Provided for use as init.d script.
stop - Same as disconnect. Provided for use as init.d script.
reload - Same as reconnect. Provided for use as init.d script.
force-reload - Same as reload. Provided for use as init.d script.
restart - Same as reload. Provided for use as init.d script.
desktop - Creates desktop shortcut for this script.
status - Prints connection status and exits. Exit code is 0 if connected, or 6 if not connected.
help - Prints this screen and exits.
man - Displays man page.
NOTE: For more information, you should consult man page or official Sakis3G wiki, available at:
http://wiki.sakis3g.org/
-
ahora es como si no reconociera mi apn si te fijas en 1 ejemplo q te puso el mio es internet.mundo-r.com .
-
Mira, prueba lo siguiente:
1- Ejecuta en consola: "sakis3g --interactive" sin comillas
2- Selecciona primera opción "Connect with 3G"
3- Introduce el numero pin
4- Selecciona la tercera opción "Custom APN"
5- Introduce: "internet.mundo-r.com" sin comillas y pulsa enter, los 2 siguientes campos déjalos vacíos, simplemente pulsa enter.
A ver si hay suerte
-
Si no te funciona con eso, en el paso 4 selecciona la opción 1.
-
no entiendo muy bien lo que quiere hacer?se quiere conectar a internet con modem usb de manera legitima?o usando otro metodo pa que se conecte a otro lado y tenerlo gratis?
si detecta el modem como se podria auditar con el?
no entiendo mucho este hilo...
-
Hola
Es un moden usb de eso que van por 3g
Saludos
si sale este mensaje, es que estoy en el movil
-
hola buenas y malas noticias jajjaj pero bueno hay un gran avance consegui conectar el moden con sakis bueno me pone conectado todo ok , la luz del modem se pone fija pero cuando abro el chrome no me abre ninguna pagina , sabras por que pude ser
-
P:D la tarjeta sim esta bien y tiene internet ya que comprobe en otro pc pero con w7.
-
Hola
Abre una consola y haz pin a google por ejemplo
A ever si hay conexion
Si tienes, sera cosa de indicarle al navegador o al sistema que conexion ha de usar
Saludos
si sale este mensaje, es que estoy en el movil
-
Hola al hacer ping a gogle no hay respuesta , y lo hice bien ya que hice ping a google con mi red wifi y si dio respuesta , bueno por otro lado te cuento un detalle cuando eliges el custom apn le pongo el mio claro internet.mundo-r.com y luego en la casilla siguiente si la dejo en blanco no se conecta donde me pide el username ok, pero si vuelvo a rellenarlo con el apn internet.mundo-r,com es la unica forma de que me conecte ademas le pido informacion de la conexion y me la da el apn , direcc..ip , submascara de red bla bla bla todo eso pero es como si tuviera la conexion y el sistema no se diera cuenta me entiendes,
-
Por cierto mas datos la interfaz la reconoce como ppp0 , yluego vas a inicio . centro de control , preferencias de conexion y apace la interfaz pp0.
-
Hola compi otra cosa lyendo por ahi ponia que si haces ìng a google ej no te sale nada pero si haces ping a la ip y i responde pues q es problema de las dns , pregunta como podria cambiae las dns en sakis o donde fuese.gracias
-
Bueno por lo menos ya te reconoce la interface y se conecta, ahora vamos a ver por que no tienes internet.
Yo no creo que sea por las dns pero por si acaso haz la prueba, hazle un ping a la ip de google a ver si hay respuesta.
ping 74.125.230.174
-
He pedido prestado un cacharo de estos para hacer las pruebas, un huawei K3765, y efectivamente con sakis3g se conecta perfectamente pero faltaba configurar las dns.
He hecho un modulo con el sakis modificado para que te ponga las dns automaticamente, aqui te lo dejo: http://www.4shared.com/file/a0LcT4d3/sakis3g-02e-wifislax.html
Crea un acceso directo en la categoria "gestores de conexión".
-
Hola he instalado el sakis q me mandaste , se conecta de maravilla , y haciendo ping a la ip de google, si hay respuesta , bueno siendo asi es que hay internet entonces , lo unico que sigo sin poder navegar .
-
Hola compi dios existe y ese ers tu , ya funciona internet desde mi usb , jjjs ufffff crei q era imposible bueno antes no fuera porque no reiniciara , gracias de verdad hay poca gente con tu paciencia , un millon de gracias , salu2 y q tengas un buen fin de semana..
-
No hay de que ;)
Saludos.