Seguridad Wireless - Wifi
Suite Seguridad Wireless => Live wifislax => Mensaje iniciado por: CCCP en 01-05-2022, 23:17 (Domingo)
-
Buenas,
Con wifislax64-2.4 y los modulos cudatoolkit-10.2.89-x86_64-1slackbuilds y nvidia-current-470.63.01-19wifislax no tenía problemas
Ahora, arranco Wifislax 3.0 Final 64bits en modo live y me fallan estas cosas:
-Hashcat (instalado)
-Libreoffice (modulo)
PC:
MSI gs65
NVIDIA GeForce GTX 1660 Ti
Modulo: nvidia-510.60.02
Modulo: cudatoolkit-10.2.89-x86_64-1slackbuilds.xzm
Modulo: libreoffice
Hashcat
wifislax64 ~ # hashcat -b
hashcat (v6.2.5) starting in benchmark mode
Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.
Segmentation fault
wifislax64 ~ #
No me funciona el modulo office.
Executable: soffice PID: 6048 Signal: Segmentation fault (11) Time: 5/1/22 10:59:50 PM UTC
CUDA
Y tengo una consulta: El paquete CUDA no está disponible en el post de módulos. ¿Debo usar el paquete CUDA, cudatoolkit-10.2.89-x86_64-1slackbuilds.xzm?
Un saludo y gracias de antemano
-
Hola , te habia escrito varias respuestas ,pero creo que el modulo de cuda ese que has puesto esta generando conflicto.
Los drivers modernos parece que ya traen su propia version de cuda , por eso son ahora tan pesados , y ademas es mas moderna (cuda 11).
He actualizado el modulo de driver con el driver 512.68.02 , prueba a ver.
Yo probaria primero poniendo solo office , ...si te funciona , añade el driver nvidia , ... y pruebas ..pero NO PONGAS ESE MODULO DE CUDA EN NINGUN CASO.
Mira el driver 510.xx ...ya trae su propio cuda.
(https://i.ibb.co/K95R28J/Screenshot-20220502-064435.png)
-
Gracias por la respuesta.
Yo probaria primero poniendo solo office , ...si te funciona , añade el driver nvidia , ... y pruebas ..pero NO PONGAS ESE MODULO DE CUDA EN NINGUN CASO.
ok
Situación previa (referente a mi primer post)
(https://i.ibb.co/NZFG6gB/Screenshot-20220501-224153.png)
Pruebas actuales (MD5 comprobado) Atención: no aporto imagen pero la situación es igual:
1) Iso sin nada: Hascat da el mismo error
2) Iso solo con nuevo modulo office: mismo error
3) Iso solo con nuevo modulo nvidia: hashcat da error, pero el driver de nvidia carga aparentemente correctamente (lo veo tipeando nvidia en el buscador y arrancando su entorno, no Hashcat)
Mis impresiones:
Parce ser que el conflicto con hashcat es de base.
Me he bajado hashcat de slackbuild y he creado un xzm, pero la version es inferior (6.2.4) y además cuando reinicio con el modulo no me lo carga. No se si lo haré bien.
Lo que digas pruebo. Gracias de antemano, un saludo
-
El problema no es hashcat , ya que afecta tambien a office , y office ni siquiera se compila, es un todo en uno que ya viene precompilado.
Por lo que si que parece que es un problema de base.
Te voy a poner varias cosas , haz las pruebas en este orden para ir acelerando esto.
1 - arranca la iso SIN NINGUN TIPO DE MODULO EXTRA
2 - una vez cargue , en una consola ejecuta clinfo
clinfo es una utilidad que enumera las plataformas opencl del sistema y sus capacidades.
3 - si clinfo te da "segmentation fault" , entonces
removepkg pocl
y vuelves a ejecutar clinfo ,
4 - si clinfo te daba fallo y tras eliminar pocl simplemente dice que no hay nada o no te da ningun segmentation , entonces el problema es pocl.
si al eliminar pocl , clinfo va bien , el siguiente paso seria añadir office ...y al arrancar eliminas primero pocl
y lanzas entonces office.
en resumidas cuentas , primero sin modulos y ejecutas clinfo , si te da error eliminas pocl y si ya no da error ,sabes que el conflicto es pocl.
podras probar todo , y simplemente al arrancar eliminar pocl , si ese es el problema , ya te explico como eliminarlo permanentemente.
-
Gracias por la respuesta y buenas de nuevo,,.
Ahí vamos
El problema no es hashcat , ya que afecta tambien a office , y office ni siquiera se compila, es un todo en uno que ya viene precompilado.
Por lo que si que parece que es un problema de base.
Te voy a poner varias cosas , haz las pruebas en este orden para ir acelerando esto.
1 - arranca la iso SIN NINGUN TIPO DE MODULO EXTRA
2 - una vez cargue , en una consola ejecuta clinfo
clinfo es una utilidad que enumera las plataformas opencl del sistema y sus capacidades.
3 - si clinfo te da "segmentation fault" , entonces
removepkg pocl
y vuelves a ejecutar clinfo ,
4 - si clinfo te daba fallo y tras eliminar pocl simplemente dice que no hay nada o no te da ningun segmentation , entonces el problema es pocl.
si al eliminar pocl , clinfo va bien , el siguiente paso seria añadir office ...y al arrancar eliminas primero pocl
y lanzas entonces office.
en resumidas cuentas , primero sin modulos y ejecutas clinfo , si te da error eliminas pocl y si ya no da error ,sabes que el conflicto es pocl.
podras probar todo , y simplemente al arrancar eliminar pocl , si ese es el problema , ya te explico como eliminarlo permanentemente.
wifislax64 ~ # clinfo
Segmentation fault
wifislax64 ~ # removepkg pocl
Removing package: pocl-1.8-x86_64-2wifislax
Removing files:
--> Deleting symlink /usr/lib64/libpocl.so
--> Deleting symlink /usr/lib64/libpocl.so.2
--> Deleting /etc/OpenCL/vendors/pocl.icd
--> Deleting /usr/bin/poclcc
--> Deleting /usr/lib64/libpocl.so.2.8.0
--> Deleting /usr/lib64/pkgconfig/pocl.pc
--> Deleting /usr/lib64/pocl/libllvmopencl.so
--> Deleting /usr/lib64/pocl/libpocl-devices-basic.so
--> Deleting /usr/lib64/pocl/libpocl-devices-pthread.so
--> Deleting /usr/share/pocl/include/_builtin_renames.h
--> Deleting /usr/share/pocl/include/_clang_opencl.h
--> Deleting /usr/share/pocl/include/_enable_all_exts.h
--> Deleting /usr/share/pocl/include/_kernel.h
--> Deleting /usr/share/pocl/include/_kernel_c.h
--> Deleting /usr/share/pocl/include/_kernel_constants.h
--> Deleting /usr/share/pocl/include/_libclang_versions_checks.h
--> Deleting /usr/share/pocl/include/opencl-c-base.h
--> Deleting /usr/share/pocl/include/opencl-c.h
--> Deleting /usr/share/pocl/include/pocl.h
--> Deleting /usr/share/pocl/include/pocl_device.h
--> Deleting /usr/share/pocl/include/pocl_image_types.h
--> Deleting /usr/share/pocl/include/pocl_spir.h
--> Deleting /usr/share/pocl/include/pocl_types.h
--> Deleting /usr/share/pocl/kernel-x86_64-unknown-linux-gnu-avx.bc
--> Deleting /usr/share/pocl/kernel-x86_64-unknown-linux-gnu-avx2.bc
--> Deleting /usr/share/pocl/kernel-x86_64-unknown-linux-gnu-avx512.bc
--> Deleting /usr/share/pocl/kernel-x86_64-unknown-linux-gnu-avx_f16c.bc
--> Deleting /usr/share/pocl/kernel-x86_64-unknown-linux-gnu-avx_fma4.bc
--> Deleting /usr/share/pocl/kernel-x86_64-unknown-linux-gnu-sse2.bc
--> Deleting /usr/share/pocl/kernel-x86_64-unknown-linux-gnu-sse41.bc
--> Deleting /usr/share/pocl/kernel-x86_64-unknown-linux-gnu-ssse3.bc
--> Deleting empty directory /usr/share/pocl/include/
--> Deleting empty directory /usr/share/pocl/
--> Deleting empty directory /usr/lib64/pocl/
wifislax64 ~ # clinfo
Segmentation fault
wifislax64 ~ #
Sin modulos, tras remover opcl, clinfo sigue dando segmentation fault
-
Con el fin de aislar el problema he reproducido lo mismo en otro PC con el mismo USB live y, siguiendo tus pasos y no da problemas.
Lenovo Slim Yoga 7
AMD Ryzen 4000
wifislax64 ~ # hashcat -b
hashcat (v6.2.5) starting in benchmark mode
Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.
* Device #1: Unstable OpenCL driver detected!
This OpenCL driver may fail kernel compilation or produce false negatives.
You can use --force to override, but do not report related errors.
No devices found/left.
Started: Tue May 3 09:21:30 2022
Stopped: Tue May 3 09:21:31 2022
wifislax64 ~ # clinfo
Number of platforms 2
Platform Name Clover
Platform Vendor Mesa
Platform Version OpenCL 1.1 Mesa 21.3.5
Platform Profile FULL_PROFILE
Platform Extensions cl_khr_icd
Platform Extensions function suffix MESA
Platform Name Portable Computing Language
Platform Vendor The pocl project
Platform Version OpenCL 2.0 pocl 1.8 Linux, Release, RELOC, LLVM 13.0.0, SLEEF, DISTRO, POCL_DEBUG
Platform Profile FULL_PROFILE
Platform Extensions cl_khr_icd cl_pocl_content_size
Platform Extensions function suffix POCL
Platform Name Clover
Number of devices 1
Device Name AMD RENOIR (DRM 3.42.0, 5.15.28-wifislax64, LLVM 13.0.0)
Device Vendor AMD
Device Vendor ID 0x1002
Device Version OpenCL 1.1 Mesa 21.3.5
Device Numeric Version 0x401000 (1.1.0)
Driver Version 21.3.5
Device OpenCL C Version OpenCL C 1.1
Device Type GPU
Device Profile FULL_PROFILE
Device Available Yes
Compiler Available Yes
Max compute units 7
Max clock frequency 1600MHz
Max work item dimensions 3
Max work item sizes 256x256x256
Max work group size 256
=== CL_PROGRAM_BUILD_LOG ===
fatal error: cannot open file '/usr/share/clc/gfx909-amdgcn-mesa-mesa3d.bc': No such file or directory
Preferred work group size multiple (kernel) <getWGsizes:1504: create kernel : error -46>
Preferred / native vector sizes
char 16 / 16
short 8 / 8
int 4 / 4
long 2 / 2
half 0 / 0 (n/a)
float 4 / 4
double 2 / 2 (cl_khr_fp64)
Half-precision Floating-point support (n/a)
Single-precision Floating-point support (core)
Denormals No
Infinity and NANs Yes
Round to nearest Yes
Round to zero No
Round to infinity No
IEEE754-2008 fused multiply-add No
Support is emulated in software No
Correctly-rounded divide and sqrt operations No
Double-precision Floating-point support (cl_khr_fp64)
Denormals Yes
Infinity and NANs Yes
Round to nearest Yes
Round to zero Yes
Round to infinity Yes
IEEE754-2008 fused multiply-add Yes
Support is emulated in software No
Address bits 64, Little-Endian
Global memory size 3221225472 (3GiB)
Error Correction support No
Max memory allocation 2254857830 (2.1GiB)
Unified memory for Host and Device No
Minimum alignment for any data type 128 bytes
Alignment of base address 32768 bits (4096 bytes)
Global Memory cache type None
Image support No
Local memory type Local
Local memory size 32768 (32KiB)
Max number of constant args 16
Max constant buffer size 67108864 (64MiB)
Max size of kernel argument 1024
Queue properties
Out-of-order execution No
Profiling Yes
Profiling timer resolution 0ns
Execution capabilities
Run OpenCL kernels Yes
Run native kernels No
ILs with version (n/a)
Built-in kernels with version (n/a)
Device Extensions cl_khr_byte_addressable_store cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_fp64 cl_khr_extended_versioning
Device Extensions with Version cl_khr_byte_addressable_store 0x400000 (1.0.0)
cl_khr_global_int32_base_atomics 0x400000 (1.0.0)
cl_khr_global_int32_extended_atomics 0x400000 (1.0.0)
cl_khr_local_int32_base_atomics 0x400000 (1.0.0)
cl_khr_local_int32_extended_atomics 0x400000 (1.0.0)
cl_khr_int64_base_atomics 0x400000 (1.0.0)
cl_khr_int64_extended_atomics 0x400000 (1.0.0)
cl_khr_fp64 0x400000 (1.0.0)
cl_khr_extended_versioning 0x400000 (1.0.0)
Platform Name Portable Computing Language
Number of devices 1
Device Name pthread-AMD Ryzen 7 4700U with Radeon Graphics
Device Vendor AuthenticAMD
Device Vendor ID 0x1022
Device Version OpenCL 1.2 pocl HSTR: pthread-x86_64-unknown-linux-gnu-znver1
Driver Version 1.8
Device OpenCL C Version OpenCL C 1.2 pocl
Device Type CPU
Device Profile FULL_PROFILE
Device Available Yes
Compiler Available Yes
Linker Available Yes
Max compute units 16
Max clock frequency 2000MHz
Device Partition (core)
Max number of sub-devices 16
Supported partition types equally, by counts
Supported affinity domains (n/a)
Max work item dimensions 3
Max work item sizes 4096x4096x4096
Max work group size 4096
Preferred work group size multiple (kernel) 8
Preferred / native vector sizes
char 16 / 16
short 16 / 16
int 8 / 8
long 4 / 4
half 0 / 0 (n/a)
float 8 / 8
double 4 / 4 (cl_khr_fp64)
Half-precision Floating-point support (n/a)
Single-precision Floating-point support (core)
Denormals Yes
Infinity and NANs Yes
Round to nearest Yes
Round to zero Yes
Round to infinity Yes
IEEE754-2008 fused multiply-add Yes
Support is emulated in software No
Correctly-rounded divide and sqrt operations Yes
Double-precision Floating-point support (cl_khr_fp64)
Denormals Yes
Infinity and NANs Yes
Round to nearest Yes
Round to zero Yes
Round to infinity Yes
IEEE754-2008 fused multiply-add Yes
Support is emulated in software No
Address bits 64, Little-Endian
Global memory size 5576892416 (5.194GiB)
Error Correction support No
Max memory allocation 2147483648 (2GiB)
Unified memory for Host and Device Yes
Minimum alignment for any data type 128 bytes
Alignment of base address 1024 bits (128 bytes)
Global Memory cache type Read/Write
Global Memory cache size 4194304 (4MiB)
Global Memory cache line size 64 bytes
Image support Yes
Max number of samplers per kernel 16
Max size for 1D images from buffer 134217728 pixels
Max 1D or 2D image array size 2048 images
Max 2D image size 8192x8192 pixels
Max 3D image size 2048x2048x2048 pixels
Max number of read image args 128
Max number of write image args 128
Local memory type Global
Local memory size 524288 (512KiB)
Max number of constant args 8
Max constant buffer size 524288 (512KiB)
Max size of kernel argument 1024
Queue properties
Out-of-order execution Yes
Profiling Yes
Prefer user sync for interop Yes
Profiling timer resolution 1ns
Execution capabilities
Run OpenCL kernels Yes
Run native kernels Yes
printf() buffer size 16777216 (16MiB)
Built-in kernels (n/a)
Device Extensions cl_khr_byte_addressable_store cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_3d_image_writes cl_khr_fp64 cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_fp64
NULL platform behavior
clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...) Clover
clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...) Success [MESA]
clCreateContext(NULL, ...) [default] Success [MESA]
clCreateContext(NULL, ...) [other] Success [POCL]
clCreateContextFromType(NULL, CL_DEVICE_TYPE_DEFAULT) Success (1)
Platform Name Clover
Device Name AMD RENOIR (DRM 3.42.0, 5.15.28-wifislax64, LLVM 13.0.0)
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU) Success (1)
Platform Name Clover
Device Name AMD RENOIR (DRM 3.42.0, 5.15.28-wifislax64, LLVM 13.0.0)
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL) Success (1)
Platform Name Clover
Device Name AMD RENOIR (DRM 3.42.0, 5.15.28-wifislax64, LLVM 13.0.0)
ICD loader properties
ICD loader Name OpenCL ICD Loader
ICD loader Vendor OCL Icd free software
ICD loader Version 2.3.1
ICD loader Profile OpenCL 3.0
wifislax64 ~ #
Parece ser que podríamos confirmar que el conflico que reporté es de base (MSI gs 65 con la nvidia 1660ti).
Yo no se seguir por mi mismo. Si quieres dime cosas y voy probando.
Gracias de nuevo.
-
solo se me ocurre una cosa...
vamos a eliminar los ocpencl config que trae de serie el sistema
te vas a
/etc/OpenCL/vendors/
y eliminas los fichero que hay ..
ejecutas
clinfo
no deberia dar ningun error , solo decirte que no hay ninguna plataforma opencl , ...
si clinfo no te da segmentation fault ...
entonces añadele el driver nvidia , y una vez arrancado ,vas a hacer lo mismo "casi"
veras que hay un
pocl.icd mesa.icd y otro que pone nvidia.icd ... lo digo de memoria ,pero vamos
vas a borrar todos menos el de nvidia ..y a probar clinfo y hashcat
si eso funciona , anularemos los otros dejandolos vacios,ya te dire como.
-
Ok...
Aplico...
solo se me ocurre una cosa...
vamos a eliminar los ocpencl config que trae de serie el sistema
te vas a
/etc/OpenCL/vendors/
y eliminas los fichero que hay ..
ejecutas
clinfo
no deberia dar ningun error , solo decirte que no hay ninguna plataforma opencl , ...
si clinfo no te da segmentation fault ...
entonces añadele el driver nvidia , y una vez arrancado ,vas a hacer lo mismo "casi"
veras que hay un
pocl.icd mesa.icd y otro que pone nvidia.icd ... lo digo de memoria ,pero vamos
vas a borrar todos menos el de nvidia ..y a probar clinfo y hashcat
si eso funciona , anularemos los otros dejandolos vacios,ya te dire como.
¡Y funciona! Sí, sí, sí. ¡Has dado con ello!
(https://i.ibb.co/4mTKDzQ/Screenshot-20220504-171155.png)
1) Borro pocl.icd mesa.icd y dejo nvidia.icd, te acordabas bien...
2) Corro clinfo correcto y hashcat y me da una bonita cifra de 297 kilohashes por segundo para un benchmarck con hash 22000 con OpenCL 3.0 CUDA 11.6.134 cargado gracias al último driver 510.68.02 que has colgado en el post de módulos y que, tal y como dices, lo integra.
wifislax64 ~ # clinfo
Number of platforms 1
Platform Name NVIDIA CUDA
Platform Vendor NVIDIA Corporation
Platform Version OpenCL 3.0 CUDA 11.6.134
Platform Profile FULL_PROFILE
Platform Extensions cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_fp64 cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts cl_nv_create_buffer cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_device_uuid cl_khr_pci_bus_info cl_khr_external_semaphore cl_khr_external_memory cl_khr_external_semaphore_opaque_fd cl_khr_external_memory_opaque_fd
Platform Extensions with Version cl_khr_global_int32_base_atomics 0x400000 (1.0.0)
cl_khr_global_int32_extended_atomics 0x400000 (1.0.0)
cl_khr_local_int32_base_atomics 0x400000 (1.0.0)
cl_khr_local_int32_extended_atomics 0x400000 (1.0.0)
cl_khr_fp64 0x400000 (1.0.0)
cl_khr_3d_image_writes 0x400000 (1.0.0)
cl_khr_byte_addressable_store 0x400000 (1.0.0)
cl_khr_icd 0x400000 (1.0.0)
cl_khr_gl_sharing 0x400000 (1.0.0)
cl_nv_compiler_options 0x400000 (1.0.0)
cl_nv_device_attribute_query 0x400000 (1.0.0)
cl_nv_pragma_unroll 0x400000 (1.0.0)
cl_nv_copy_opts 0x400000 (1.0.0)
cl_nv_create_buffer 0x400000 (1.0.0)
cl_khr_int64_base_atomics 0x400000 (1.0.0)
cl_khr_int64_extended_atomics 0x400000 (1.0.0)
cl_khr_device_uuid 0x400000 (1.0.0)
cl_khr_pci_bus_info 0x400000 (1.0.0)
cl_khr_external_semaphore 0x9000 (0.9.0)
cl_khr_external_memory 0x9000 (0.9.0)
cl_khr_external_semaphore_opaque_fd 0x9000 (0.9.0)
cl_khr_external_memory_opaque_fd 0x9000 (0.9.0)
Platform Numeric Version 0xc00000 (3.0.0)
Platform Extensions function suffix NV
Platform Host timer resolution 0ns
Platform Name NVIDIA CUDA
Number of devices 1
Device Name NVIDIA GeForce GTX 1660 Ti
Device Vendor NVIDIA Corporation
Device Vendor ID 0x10de
Device Version OpenCL 3.0 CUDA
Device UUID 9bec3d5a-260a-77ef-bdf4-5f6e6ce74720
Driver UUID 9bec3d5a-260a-77ef-bdf4-5f6e6ce74720
Valid Device LUID No
Device LUID 0000-4000636c5f6b
Device Node Mask 0
Device Numeric Version 0xc00000 (3.0.0)
Driver Version 510.68.02
Device OpenCL C Version OpenCL C 1.2
Device OpenCL C all versions OpenCL C 0x400000 (1.0.0)
OpenCL C 0x401000 (1.1.0)
OpenCL C 0x402000 (1.2.0)
OpenCL C 0xc00000 (3.0.0)
Device OpenCL C features __opencl_c_fp64 0xc00000 (3.0.0)
__opencl_c_images 0xc00000 (3.0.0)
__opencl_c_int64 0xc00000 (3.0.0)
__opencl_c_3d_image_writes 0xc00000 (3.0.0)
Latest comfornace test passed v2021-02-01-00
Device Type GPU
Device Topology (NV) PCI-E, 0000:01:00.0
Device Profile FULL_PROFILE
Device Available Yes
Compiler Available Yes
Linker Available Yes
Max compute units 24
Max clock frequency 1455MHz
Compute Capability (NV) 7.5
Device Partition (core)
Max number of sub-devices 1
Supported partition types None
Supported affinity domains (n/a)
Max work item dimensions 3
Max work item sizes 1024x1024x64
Max work group size 1024
Preferred work group size multiple (device) 32
Preferred work group size multiple (kernel) 32
Warp size (NV) 32
Max sub-groups per work group 0
Preferred / native vector sizes
char 1 / 1
short 1 / 1
int 1 / 1
long 1 / 1
half 0 / 0 (n/a)
float 1 / 1
double 1 / 1 (cl_khr_fp64)
Half-precision Floating-point support (n/a)
Single-precision Floating-point support (core)
Denormals Yes
Infinity and NANs Yes
Round to nearest Yes
Round to zero Yes
Round to infinity Yes
IEEE754-2008 fused multiply-add Yes
Support is emulated in software No
Correctly-rounded divide and sqrt operations Yes
Double-precision Floating-point support (cl_khr_fp64)
Denormals Yes
Infinity and NANs Yes
Round to nearest Yes
Round to zero Yes
Round to infinity Yes
IEEE754-2008 fused multiply-add Yes
Support is emulated in software No
Address bits 64, Little-Endian
Global memory size 6233522176 (5.805GiB)
Error Correction support No
Max memory allocation 1558380544 (1.451GiB)
Unified memory for Host and Device No
Integrated memory (NV) No
Shared Virtual Memory (SVM) capabilities (core)
Coarse-grained buffer sharing Yes
Fine-grained buffer sharing No
Fine-grained system sharing No
Atomics No
Minimum alignment for any data type 128 bytes
Alignment of base address 4096 bits (512 bytes)
Preferred alignment for atomics
SVM 0 bytes
Global 0 bytes
Local 0 bytes
Atomic memory capabilities relaxed, work-group scope
Atomic fence capabilities relaxed, acquire/release, work-group scope
Max size for global variable 0
Preferred total size of global vars 0
Global Memory cache type Read/Write
Global Memory cache size 786432 (768KiB)
Global Memory cache line size 128 bytes
Image support Yes
Max number of samplers per kernel 32
Max size for 1D images from buffer 268435456 pixels
Max 1D or 2D image array size 2048 images
Max 2D image size 32768x32768 pixels
Max 3D image size 16384x16384x16384 pixels
Max number of read image args 256
Max number of write image args 32
Max number of read/write image args 0
Pipe support No
Max number of pipe args 0
Max active pipe reservations 0
Max pipe packet size 0
Local memory type Local
Local memory size 49152 (48KiB)
Registers per block (NV) 65536
Max number of constant args 9
Max constant buffer size 65536 (64KiB)
Generic address space support No
Max size of kernel argument 4352 (4.25KiB)
Queue properties (on host)
Out-of-order execution Yes
Profiling Yes
Device enqueue capabilities (n/a)
Queue properties (on device)
Out-of-order execution No
Profiling No
Preferred size 0
Max size 0
Max queues on device 0
Max events on device 0
Prefer user sync for interop No
Profiling timer resolution 1000ns
Execution capabilities
Run OpenCL kernels Yes
Run native kernels No
Non-uniform work-groups No
Work-group collective functions No
Sub-group independent forward progress No
Kernel execution timeout (NV) Yes
Concurrent copy and kernel execution (NV) Yes
Number of async copy engines 3
IL version (n/a)
ILs with version <printDeviceInfo:186: get CL_DEVICE_ILS_WITH_VERSION : error -30>
printf() buffer size 1048576 (1024KiB)
Built-in kernels (n/a)
Built-in kernels with version <printDeviceInfo:190: get CL_DEVICE_BUILT_IN_KERNELS_WITH_VERSION : error -30>
Device Extensions cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_fp64 cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts cl_nv_create_buffer cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_device_uuid cl_khr_pci_bus_info cl_khr_external_semaphore cl_khr_external_memory cl_khr_external_semaphore_opaque_fd cl_khr_external_memory_opaque_fd
Device Extensions with Version cl_khr_global_int32_base_atomics 0x400000 (1.0.0)
cl_khr_global_int32_extended_atomics 0x400000 (1.0.0)
cl_khr_local_int32_base_atomics 0x400000 (1.0.0)
cl_khr_local_int32_extended_atomics 0x400000 (1.0.0)
cl_khr_fp64 0x400000 (1.0.0)
cl_khr_3d_image_writes 0x400000 (1.0.0)
cl_khr_byte_addressable_store 0x400000 (1.0.0)
cl_khr_icd 0x400000 (1.0.0)
cl_khr_gl_sharing 0x400000 (1.0.0)
cl_nv_compiler_options 0x400000 (1.0.0)
cl_nv_device_attribute_query 0x400000 (1.0.0)
cl_nv_pragma_unroll 0x400000 (1.0.0)
cl_nv_copy_opts 0x400000 (1.0.0)
cl_nv_create_buffer 0x400000 (1.0.0)
cl_khr_int64_base_atomics 0x400000 (1.0.0)
cl_khr_int64_extended_atomics 0x400000 (1.0.0)
cl_khr_device_uuid 0x400000 (1.0.0)
cl_khr_pci_bus_info 0x400000 (1.0.0)
cl_khr_external_semaphore 0x9000 (0.9.0)
cl_khr_external_memory 0x9000 (0.9.0)
cl_khr_external_semaphore_opaque_fd 0x9000 (0.9.0)
cl_khr_external_memory_opaque_fd 0x9000 (0.9.0)
NULL platform behavior
clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...) NVIDIA CUDA
clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...) Success [NV]
clCreateContext(NULL, ...) [default] Success [NV]
clCreateContextFromType(NULL, CL_DEVICE_TYPE_DEFAULT) No platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU) No platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM) Invalid device type for platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL) No platform
ICD loader properties
ICD loader Name OpenCL ICD Loader
ICD loader Vendor OCL Icd free software
ICD loader Version 2.3.1
ICD loader Profile OpenCL 3.0
wifislax64 ~ # hashcat -m 22000 -b
hashcat (v6.2.5) starting in benchmark mode
Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.
Successfully initialized NVIDIA CUDA library.
Failed to initialize NVIDIA RTC library.
* Device #1: CUDA SDK Toolkit not installed or incorrectly installed.
CUDA SDK Toolkit required for proper device support and utilization.
Falling back to OpenCL runtime.
* Device #1: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: https://hashcat.net/q/timeoutpatch
nvmlDeviceGetFanSpeed(): Not Supported
OpenCL API (OpenCL 3.0 CUDA 11.6.134) - Platform #1 [NVIDIA Corporation]
========================================================================
* Device #1: NVIDIA GeForce GTX 1660 Ti, 5824/5944 MB (1486 MB allocatable), 24MCU
Benchmark relevant options:
===========================
* --optimized-kernel-enable
-------------------------------------------------------------
* Hash-Mode 22000 (WPA-PBKDF2-PMKID+EAPOL) [Iterations: 4095]
-------------------------------------------------------------
Speed.#1.........: 297.7 kH/s (80.54ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Started: Wed May 4 17:02:20 2022
Stopped: Wed May 4 17:02:32 2022
wifislax64 ~ #
¿Qué hacemos para que quede completo?
Gracias por tu trabajo
-
Tras tus recomendaciones, lo que ataña a los módulos...
Módulos que arrancan sin problema (no he realizado ningún uso, solo se ha probado que no de conflicto al ejecutarlo):
burpsuite-2022.3.6-noarch-1wifislax ok
filezilla-kit-3.59.0-1wifislax ok
firefox-100.0-x86_64-1wifislax ok
libreoffice-kit-7.3.2-x86_64-1wifislax ok
metasploit-kit-6.1.40-1wifislax ok
nvidia-510.68.02-1wifislax ok
openshot-kit-2.6.1-1wifislax ok
tor-browser-11.5a9-x86_64-1wifislax ok
vlc-3.0.17.3-x86_64-1wifislax ok
websploit-4.0.4-x86_64-4wifislax ok
-
Bien , sin amimo de dar la chapa , pero para que basicamente se entienda de que va el problemilla ...
Esos ficheros ,son leidos por el cargador de plataformas "ocl-icd" , son simples ficheros de texto que apuntan hacia la libreria responsable de dar soporte opencl.
Cuando hay varias , a vaces hay conflictos.
Como probemos a quitar pocl , y ese no daba resultado , me inclino a pensar que es mesa.icd , por lo que de momento te paso un xzm que debes poner en "modules" , y lo que va a hacer es sobreescribir ese fichero con uno vacio.
Supongo que con eso bastara , la idea es no perder tambien pocl innecesariamente , ya que pocl da soporte por ejemplo a ese ryzen 4000 que tienes en otro equipo , y para no andar danzando poniendo y quitando el anulador.
De manera que mi idea es que con este modulo puedas usar la live en otros equipos sin perder soporte (solo el de mesa.icd que por suerte ademas es el mas basico de todos y el que menso hardware soporta)
Te dejo anulado mesa.icd , y me cuentas.
https://upfiles.com/6O9nYoXQ
-
Subi el fichero hace ya una hora, pero se queda en procesing ...
como es peque;o lo he subido a mediafire
https://www.mediafire.com/file/tjh8dv4j4btw5gt/anular-mesa.icd.xzm/file
-
pss , ya lo han arreglado , puedes descargarlo de donde quieras ...
Announcements
[FIXED] Issue with processing files May 5, 2022, 10:32 AM
confirmame cuando lo has descargado para borrar
y si te ha funcionado o hay que bloquear el otro tambien. ;)
-
pss , ya lo han arreglado , puedes descargarlo de donde quieras ...
Announcements
[FIXED] Issue with processing files May 5, 2022, 10:32 AM
confirmame cuando lo has descargado para borrar
y si te ha funcionado o hay que bloquear el otro tambien. ;)
Funciona perfectamente.
(https://i.ibb.co/WP9H9db/Screenshot-20220505-213637.png)
Muchas gracias crack
-
ok , pues dejatelo puesto , te valdra para todos los equipos. ;)
el opencl de mesa yo creo que apenas soporta nada o casi nada.
-
Uff , hoy trasteando , he vuelto a probar lo de cudatoolkit ...
Pues va ser que si que ayuda , en mi caso con una nvidia 1070 , me da 25.000 llaves mas por segundo , tanto con driver moderno como drivers legacy.
Lo que no creo que te sirva ese que tienes de otra version mas antigua de wifislax ... de todas formas puedes probar ...si no te lo pilla al lanzar hashcat te dira que no encuentra cuda sdk.