?>/script>'; } ?> Dudas sobre wifislax 4.0 Widgets Magazine

Autor Tema: Dudas sobre wifislax 4.0  (Leído 4275 veces)

0 Usuarios y 1 Visitante están viendo este tema.

Desconectado sol666

  • *****
  • Mensajes: 136
Re:Dudas sobre wifislax 4.0
« Respuesta #40 en: 17-04-2025, 01:20 (Jueves) »
es el pc de sobremesa mas nuevo,ryzen7 3700x y el sdd es un samsung 860 EVO Basic SSD 1TB SATA3,con el asus ni he probado.

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #41 en: 17-04-2025, 01:21 (Jueves) »
deja tambien vacia la carpeta modules ...

los puedes instalar despues en caso de exito.


SATA3

Pues podria ser de hay ...

Prueba lo que te dije de quitar modulos de la lista a ver si llega a intentar instalar el grub ,, que te dara error ,pero sabremos que es por que le cuesta mucho volcar los modulos gordos ....tampoco tiene que ser el hdd , .. ..  el pendrive tiene mucho que decir hay.

Yo uso uno de 64gb usb3 en puerto usb3.

Pero en usb2 , me instala tambien rapido.
« Última modificación: 17-04-2025, 01:23 (Jueves) por USUARIONUEVO »

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #42 en: 17-04-2025, 01:24 (Jueves) »
Resumen , ...inicia el live normal ...

Ves a la lista de modulos y quita de slackware el d y el  l   y de wifislax el firmwares..

Tira el lanzador a ver hasta donde llega a instalar.

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #43 en: 17-04-2025, 01:30 (Jueves) »
La 2.4 se instala rapido por que el modulo mas grande es de 218 megas , y solo hay otro de 211 y uno de 171  , los demas menos de 100

Mientras la nueva lleva ya modulos de 1 giga el driver nvidia pesa 400 , ...los firmwares casi 400 ...

Es mucho mas pesada que la 2.4


Aunque dices que la 3.4 tampoco te va y es solo 2 gigas entera ...  muy raro todo.
« Última modificación: 17-04-2025, 01:31 (Jueves) por USUARIONUEVO »

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #44 en: 17-04-2025, 01:40 (Jueves) »
Si alguien lee el hilo y la instalo en hdd que comente , por que ya tengo dudas ...aunque no me falla en 3 de 3 ...

Desconectado sol666

  • *****
  • Mensajes: 136
Re:Dudas sobre wifislax 4.0
« Respuesta #45 en: 17-04-2025, 01:41 (Jueves) »
Resumen , ...inicia el live normal ...

Ves a la lista de modulos y quita de slackware el d y el  l   y de wifislax el firmwares..

Tira el lanzador a ver hasta donde llega a instalar.

hecho e igual,se queda en nstalando el ultimo modulo,el 029 ahi parpadeando y la gui en realizando taraeas finales...,lleva mas de diez minutos y de ahi no pasa.voy a volver a arrancar y le quito algun modulo mas a ver

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #46 en: 17-04-2025, 01:42 (Jueves) »
Que raro tio

Tengo en otro pincho la 4.0 ,  ...voy a instalarla  a ver si es que algo esta mal y no lo vi ...

Desconectado sol666

  • *****
  • Mensajes: 136
Re:Dudas sobre wifislax 4.0
« Respuesta #47 en: 17-04-2025, 01:43 (Jueves) »
i alguien lee el hilo y la instalo en hdd que comente , por que ya tengo dudas ...aunque no me falla en 3 de 3 ...
por curiosidad la tabla de particiones con las maquinas que tienen windows es la misma,/dev/sda4 ??


Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #48 en: 17-04-2025, 01:56 (Jueves) »
i alguien lee el hilo y la instalo en hdd que comente , por que ya tengo dudas ...aunque no me falla en 3 de 3 ...
por curiosidad la tabla de particiones con las maquinas que tienen windows es la misma,/dev/sda4 ??

Si , solo tienen un disco ...  en varias particiones pero solo un hdd.

El caso es que va volvandolos, osea que sabe el hdd y la particion  ...y no da error de nada  ...

Yo acabo de instalar 2 veces en un momento ...sin problema , ...


Tambien puedes probar otras cosas , recuerdo que a pepe1000 le dio problemas parecidos un pincho usb o una micvrosd ...

Formatea el pincho ...o probar con otro ... 

Me puedes tambien por favor, cuando vas al modo live , abre una consola y ejecuta dmesg ...

ejecutalo varis veces y mira a ver si la parte del final va sumando un  mensaje espameando ...

es decir un  mensaje de informe que no para de salir y salir ..

dmesg
dmesg
dmesg

si las tre sveces la ultima linea esta igual es que esta okey ...si va saliendo un mensjae que crece con un numero o algo asi , es que ese kernel se esta zampando la ram .... y podria provocar error al instalador ...seria bug en kernel.



Desconectado sol666

  • *****
  • Mensajes: 136
Re:Dudas sobre wifislax 4.0
« Respuesta #49 en: 17-04-2025, 02:06 (Jueves) »
ok,lo pruebo,acabo de intentarlo con otro usb y quitando esos tres modulos y el de jdk de la lista y sigue igual

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #50 en: 17-04-2025, 02:08 (Jueves) »
ok,lo pruebo,acabo de intentarlo con otro usb y quitando esos tres modulos y el de jdk de la lista y sigue igual

Que misterio chico ... se me acaban las ideas-

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #51 en: 17-04-2025, 02:11 (Jueves) »
Puedes intentar la instalacion , ... y pasamr un modulo con los changes >?¿

Me interesa ver que pasa en la carpeta tmp  , que es la que usa el instalador para crear y leer los parametros.

Desconectado sol666

  • *****
  • Mensajes: 136
Re:Dudas sobre wifislax 4.0
« Respuesta #52 en: 17-04-2025, 02:17 (Jueves) »
el dmseg no cambiadespues de ejecutarlo 5 veces,es largo pero ahi va

Código: [Seleccionar]
[wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ # dmesg
[    0.000000] Linux version 6.14.0-wifislax64 (root@wifislax64) (gcc (GCC) 14.2.0, GNU ld version 2.44-slack151) #1 SMP PREEMPT_DYNAMIC Thu Apr  3 06:51:43 CEST 2025
[    0.000000] Command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c1efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c1f000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000bc54efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc54f000-0x00000000bc8b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8b8000-0x00000000bc8f1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8f2000-0x00000000bcfb0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfb1000-0x00000000bddfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f37ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000043f380000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B550 GAMING X/B550 GAMING X, BIOS F13h 04/23/2021
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xbd400000-0xbd40ffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] RAMDISK: [mem 0x091ec000-0x09c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BCF99728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: FACP 0x00000000BC8E1000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BC8C4000 006865 (v02 ALASKA A M I    01072009 INTL 20190509)
[    0.000000] ACPI: FACS 0x00000000BCF94000 000040
[    0.000000] ACPI: SSDT 0x00000000BC8E8000 009FE8 (v01 GBT    GSWApp   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E7000 00092A (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000BC8E3000 003C9A (v01 AMD    AMD AOD  00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8E2000 000221 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: FIDT 0x00000000BC8DA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC8D9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC8D8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BC8D7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: TPM2 0x00000000BC8D5000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.000000] ACPI: PCCT 0x00000000BC8D4000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000BC8D3000 000ED8 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000BC8D2000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC8D1000 0005F6 (v01 AMD    ArticDGP 00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8CD000 003A59 (v01 AMD    ArticN   00000001 INTL 20190509)
[    0.000000] ACPI: WSMT 0x00000000BC8CC000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: APIC 0x00000000BC8CB000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BC8DF000 00147F (v01 AMD    ArticC   00000001 INTL 20190509)
[    0.000000] ACPI: SSDT 0x00000000BC8DE000 0000BF (v01 AMD    AmdTable 00001000 INTL 20190509)
[    0.000000] ACPI: FPDT 0x00000000BC8DD000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xbc8e1000-0xbc8e1113]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xbc8c4000-0xbc8ca864]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xbcf94000-0xbcf9403f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e8000-0xbc8f1fe7]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e7000-0xbc8e7929]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e3000-0xbc8e6c99]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8e2000-0xbc8e2220]
[    0.000000] ACPI: Reserving FIDT table memory at [mem 0xbc8da000-0xbc8da09b]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xbc8d9000-0xbc8d903b]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xbc8d8000-0xbc8d8037]
[    0.000000] ACPI: Reserving IVRS table memory at [mem 0xbc8d7000-0xbc8d70cf]
[    0.000000] ACPI: Reserving TPM2 table memory at [mem 0xbc8d5000-0xbc8d504b]
[    0.000000] ACPI: Reserving PCCT table memory at [mem 0xbc8d4000-0xbc8d406d]
[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xbc8d3000-0xbc8d3ed7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xbc8d2000-0xbc8d2028]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8d1000-0xbc8d15f5]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8cd000-0xbc8d0a58]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xbc8cc000-0xbc8cc027]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xbc8cb000-0xbc8cb15d]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8df000-0xbc8e047e]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xbc8de000-0xbc8de0be]
[    0.000000] ACPI: Reserving FPDT table memory at [mem 0xbc8dd000-0xbc8dd043]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43f37a780-0x43f37fcbf]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009c1efff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a210000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000bc54efff]
[    0.000000]   node   0: [mem 0x00000000bddff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 993 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 6320 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] CPU topo: Max. logical packages:   1
[    0.000000] CPU topo: Max. logical dies:       1
[    0.000000] CPU topo: Max. dies per package:   1
[    0.000000] CPU topo: Max. threads per core:   2
[    0.000000] CPU topo: Num. cores per package:     8
[    0.000000] CPU topo: Num. threads per package:  16
[    0.000000] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.000000] CPU topo: Rejected CPUs 16
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c1f000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc54f000-0xbc8b7fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8b8000-0xbc8f1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbc8f2000-0xbcfb0fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbcfb1000-0xbddfefff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd4fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd500000-0xfd6fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Kernel command line: initrd=/boot/initrd.xz kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce rw BOOT_IMAGE=/boot/vmlinuz
[    0.000000] Unknown kernel command line parameters "kbd=es xkb=es locale=es_ES.utf8 tz=Europe/Madrid noload=020-Slack_xfce BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[    0.000000] random: crng init done
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4179547
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 69122 entries in 271 pages
[    0.000000] ftrace: allocated 271 pages with 5 groups
[    0.000000] Dynamic Preempt: lazy
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: legacy console [tty0] enabled
[    0.000000] ACPI: Core revision 20240827
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: PIT calibration matches HPET. 2 loops
[    0.008000] tsc: Detected 4092.387 MHz processor
[    0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3afd47a9cbd, max_idle_ns: 440795367560 ns
[    0.000103] Calibrating delay loop (skipped), value calculated using timer frequency.. 8184.77 BogoMIPS (lpj=4092387)
[    0.000213] Zenbleed: please update your microcode for the most optimal fix
[    0.000295] SVM disabled (by BIOS) in MSR_VM_CR
[    0.000369] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.000491] LVT offset 1 assigned for vector 0xf9
[    0.000691] LVT offset 2 assigned for vector 0xf4
[    0.000794] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.001102] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.001184] process: using mwait in idle threads
[    0.001258] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.001351] Spectre V2 : Mitigation: Retpolines
[    0.001424] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.001517] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.001596] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.001676] RETBleed: Mitigation: untrained return thunk
[    0.001752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.001845] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.001937] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.002018] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.002102] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.002183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.002274] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.002353] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.002432] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.002510] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.021662] Freeing SMP alternatives memory: 68K
[    0.021740] pid_max: default: 32768 minimum: 301
[    0.021867] LSM: initializing lsm=capability
[    0.022004] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.125654] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.126019] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.126102] ... version:                0
[    0.126102] ... bit width:              48
[    0.126102] ... generic registers:      6
[    0.126102] ... value mask:             0000ffffffffffff
[    0.126102] ... max period:             00007fffffffffff
[    0.126102] ... fixed-purpose events:   0
[    0.126102] ... event mask:             000000000000003f
[    0.126191] signal: max sigframe size: 1776
[    0.126293] rcu: Hierarchical SRCU implementation.
[    0.126368] rcu:     Max phase no-delay instances is 400.
[    0.126492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.133674] smp: Bringing up secondary CPUs ...
[    0.133867] smpboot: x86: Booting SMP configuration:
[    0.133944] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.147189] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.155127] smp: Brought up 1 node, 16 CPUs
[    0.155195] smpboot: Total of 16 processors activated (130956.38 BogoMIPS)
[    0.157199] Memory: 16278328K/16718188K available (23566K kernel code, 3784K rwdata, 9292K rodata, 4136K init, 5064K bss, 423668K reserved, 0K cma-reserved)
[    0.158169] devtmpfs: initialized
[    0.158245] x86/mm: Memory block size: 128MB
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
[    0.161428] ACPI: PM: Registering ACPI NVS region [mem 0xbc8f2000-0xbcfb0fff] (7073792 bytes)
[    0.162258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.163192] pinctrl core: initialized pinctrl subsystem
[    0.163841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164235] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.164321] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.164415] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.164516] audit: initializing netlink subsys (disabled)
[    0.164599] audit: type=2000 audit(1744855451.172:1): state=initialized audit_enabled=0 res=1
[    0.164599] thermal_sys: Registered thermal governor 'fair_share'
[    0.164599] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164599] thermal_sys: Registered thermal governor 'step_wise'
[    0.164599] thermal_sys: Registered thermal governor 'user_space'
[    0.164599] cpuidle: using governor ladder
[    0.165108] cpuidle: using governor menu
[    0.165207] Detected 1 PCC Subspaces
[    0.165279] Registering PCC driver as Mailbox controller
[    0.165453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165453] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.165508] PCI: Using configuration type 1 for base access
[    0.166259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.166259] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.166284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.166366] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.167246] cryptd: max_cpu_qlen set to 1000
[    0.167339] raid6: skipped pq benchmark and selected avx2x4
[    0.167339] raid6: using avx2x2 recovery algorithm
[    0.167360] ACPI: Added _OSI(Module Device)
[    0.167433] ACPI: Added _OSI(Processor Device)
[    0.167508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168105] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177351] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.179797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190906] ACPI: Interpreter enabled
[    0.190998] ACPI: PM: (supports S0 S3 S4 S5)
[    0.191072] ACPI: Using IOAPIC for interrupt routing
[    0.193261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193358] PCI: Using E820 reservations for host bridge windows
[    0.193943] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.208211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.208391] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.208583] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.209324] PCI host bridge to bus 0000:00
[    0.209400] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.209482] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.209565] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.209647] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.209730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.209823] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[    0.209915] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.210007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.210105] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[    0.210333] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[    0.210554] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.210741] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.210850] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.210931] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.211013] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.211112] pci 0000:00:01.2: enabling Extended Tags
[    0.211250] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.211571] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211754] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.211937] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[    0.212046] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.212110] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.212191] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.212280] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.212440] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.213190] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213374] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213558] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.213739] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.213846] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.213938] pci 0000:00:07.1: enabling Extended Tags
[    0.214060] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214269] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[    0.214451] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[    0.214559] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.214640] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.214734] pci 0000:00:08.1: enabling Extended Tags
[    0.214860] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215186] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.215417] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.215667] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[    0.215816] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[    0.215963] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[    0.216113] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[    0.216262] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[    0.216410] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[    0.216557] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[    0.216705] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[    0.216939] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[    0.217077] pci 0000:01:00.0: BAR 0 [mem 0xfc6a0000-0xfc6a7fff 64bit]
[    0.217116] pci 0000:01:00.0: enabling Extended Tags
[    0.217251] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.217533] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[    0.217675] pci 0000:01:00.1: BAR 5 [mem 0xfc680000-0xfc69ffff]
[    0.217757] pci 0000:01:00.1: ROM [mem 0xfc600000-0xfc67ffff pref]
[    0.217844] pci 0000:01:00.1: enabling Extended Tags
[    0.217967] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.218243] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.218367] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.218450] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.218532] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.218638] pci 0000:01:00.2: enabling Extended Tags
[    0.218769] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.219001] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.219251] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.219376] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.219459] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.219542] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.219650] pci 0000:02:09.0: enabling Extended Tags
[    0.219792] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.220046] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.220206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.220381] pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
[    0.220465] pci 0000:03:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[    0.220465] pci 0000:03:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[    0.220472] pci 0000:03:00.0: supports D1 D2
[    0.220547] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220955] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.221208] pci 0000:04:00.0: [10de:2182] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.221344] pci 0000:04:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.221426] pci 0000:04:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221510] pci 0000:04:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.221594] pci 0000:04:00.0: BAR 5 [io  0xe000-0xe07f]
[    0.221672] pci 0000:04:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[    0.221777] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.221925] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.222092] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.222288] pci 0000:04:00.1: [10de:1aeb] type 00 class 0x040300 PCIe Endpoint
[    0.222421] pci 0000:04:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[    0.222682] pci 0000:04:00.2: [10de:1aec] type 00 class 0x0c0330 PCIe Endpoint
[    0.224146] pci 0000:04:00.2: BAR 0 [mem 0xe2000000-0xe203ffff 64bit pref]
[    0.224146] pci 0000:04:00.2: BAR 3 [mem 0xe2040000-0xe204ffff 64bit pref]
[    0.224241] pci 0000:04:00.2: PME# supported from D0 D3hot
[    0.224425] pci 0000:04:00.3: [10de:1aed] type 00 class 0x0c8000 PCIe Endpoint
[    0.224557] pci 0000:04:00.3: BAR 0 [mem 0xfc084000-0xfc084fff]
[    0.224693] pci 0000:04:00.3: PME# supported from D0 D3hot
[    0.224862] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.225006] pci 0000:05:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[    0.225135] pci 0000:05:00.0: enabling Extended Tags
[    0.225395] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.225550] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[    0.225679] pci 0000:06:00.0: enabling Extended Tags
[    0.225946] pci 0000:06:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[    0.226068] pci 0000:06:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[    0.226183] pci 0000:06:00.1: BAR 5 [mem 0xfc400000-0xfc401fff]
[    0.226269] pci 0000:06:00.1: enabling Extended Tags
[    0.226510] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[    0.226631] pci 0000:06:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[    0.226721] pci 0000:06:00.3: enabling Extended Tags
[    0.226848] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.227086] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.227616] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227749] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.227873] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.228008] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.228153] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.228274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.228394] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.228515] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.230121] iommu: Default domain type: Translated
[    0.230182] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.230470] SCSI subsystem initialized
[    0.230470] libata version 3.00 loaded.
[    0.230470] ACPI: bus type USB registered
[    0.230470] usbcore: registered new interface driver usbfs
[    0.230470] usbcore: registered new interface driver hub
[    0.230470] usbcore: registered new device driver usb
[    0.230476] pps_core: LinuxPPS API ver. 1 registered
[    0.230553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230652] PTP clock support registered
[    0.231117] EDAC MC: Ver: 3.0.0
[    0.231393] PCI: Using ACPI for IRQ routing
[    0.235713] PCI: pci_cache_line_size set to 64 bytes
[    0.235779] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.235781] e820: reserve RAM buffer [mem 0x09c1f000-0x0bffffff]
[    0.235783] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.235785] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.235786] e820: reserve RAM buffer [mem 0xbc54f000-0xbfffffff]
[    0.235788] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.235790] e820: reserve RAM buffer [mem 0x43f380000-0x43fffffff]
[    0.236130] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.236198] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.236277] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.236277] vgaarb: loaded
[    0.236277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236281] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.238165] clocksource: Switched to clocksource tsc-early
[    0.238425] VFS: Disk quotas dquot_6.6.0
[    0.238507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.238607] netfs: FS-Cache loaded
[    0.238732] pnp: PnP ACPI init
[    0.238894] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.239070] system 00:01: [mem 0xfd100000-0xfd1fffff] has been reserved
[    0.239362] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.239442] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.239522] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.239606] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[    0.239936] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.240016] system 00:04: [io  0x040b] has been reserved
[    0.240094] system 00:04: [io  0x04d6] has been reserved
[    0.240172] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.240252] system 00:04: [io  0x0c14] has been reserved
[    0.240330] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.240410] system 00:04: [io  0x0c52] has been reserved
[    0.240488] system 00:04: [io  0x0c6c] has been reserved
[    0.240569] system 00:04: [io  0x0c6f] has been reserved
[    0.240647] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.240727] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.240806] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.240886] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.240966] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.241046] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.241125] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241209] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.241292] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.241373] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.241455] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.241540] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.241623] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.242313] pnp: PnP ACPI: found 5 devices
[    0.248684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.248842] NET: Registered PF_INET protocol family
[    0.249026] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.251230] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.251338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.251433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.251632] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.251840] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251999] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.252117] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252236] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.252408] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.252583] RPC: Registered named UNIX socket transport module.
[    0.252664] RPC: Registered udp transport module.
[    0.252739] RPC: Registered tcp transport module.
[    0.252814] RPC: Registered tcp-with-tls transport module.
[    0.252892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252973] NET: Registered PF_XDP protocol family
[    0.253059] pci 0000:02:09.0: PCI bridge to [bus 03]
[    0.253137] pci 0000:02:09.0:   bridge window [io  0xf000-0xffff]
[    0.253222] pci 0000:02:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253311] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[    0.253390] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.253474] pci 0000:01:00.2:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.253566] pci 0000:00:01.2: PCI bridge to [bus 01-03]
[    0.253644] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.253726] pci 0000:00:01.2:   bridge window [mem 0xfc500000-0xfc6fffff]
[    0.253814] pci 0000:00:03.1: PCI bridge to [bus 04]
[    0.253891] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.253973] pci 0000:00:03.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.254057] pci 0000:00:03.1:   bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.254154] pci 0000:00:07.1: PCI bridge to [bus 05]
[    0.254236] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.254315] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc4fffff]
[    0.254401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.254482] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.254565] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.254645] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.254726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.254808] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[    0.254891] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.254974] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.255052] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc6fffff]
[    0.255133] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.255211] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255292] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.255370] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.255451] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.255530] pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.255612] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[    0.255704] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc4fffff]
[    0.256022] pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
[    0.256145] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.256258] pci 0000:04:00.2: D0 power state depends on 0000:04:00.0
[    0.256460] pci 0000:04:00.3: D0 power state depends on 0000:04:00.0
[    0.256693] PCI: CLS 64 bytes, default 64
[    0.256784] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.256849] Trying to unpack rootfs image as initramfs...
[    0.256938] pci 0000:00:00.0: Adding to iommu group 0
[    0.257050] pci 0000:00:01.0: Adding to iommu group 1
[    0.257147] pci 0000:00:01.2: Adding to iommu group 2
[    0.257255] pci 0000:00:02.0: Adding to iommu group 3
[    0.257363] pci 0000:00:03.0: Adding to iommu group 4
[    0.257460] pci 0000:00:03.1: Adding to iommu group 5
[    0.257682] pci 0000:00:04.0: Adding to iommu group 6
[    0.257789] pci 0000:00:05.0: Adding to iommu group 7
[    0.257896] pci 0000:00:07.0: Adding to iommu group 8
[    0.257993] pci 0000:00:07.1: Adding to iommu group 9
[    0.258102] pci 0000:00:08.0: Adding to iommu group 10
[    0.258199] pci 0000:00:08.1: Adding to iommu group 11
[    0.258317] pci 0000:00:14.0: Adding to iommu group 12
[    0.258413] pci 0000:00:14.3: Adding to iommu group 12
[    0.258600] pci 0000:00:18.0: Adding to iommu group 13
[    0.258699] pci 0000:00:18.1: Adding to iommu group 13
[    0.258797] pci 0000:00:18.2: Adding to iommu group 13
[    0.258894] pci 0000:00:18.3: Adding to iommu group 13
[    0.258991] pci 0000:00:18.4: Adding to iommu group 13
[    0.259089] pci 0000:00:18.5: Adding to iommu group 13
[    0.259186] pci 0000:00:18.6: Adding to iommu group 13
[    0.259284] pci 0000:00:18.7: Adding to iommu group 13
[    0.260540] pci 0000:01:00.0: Adding to iommu group 14
[    0.260640] pci 0000:01:00.1: Adding to iommu group 14
[    0.260741] pci 0000:01:00.2: Adding to iommu group 14
[    0.260824] pci 0000:02:09.0: Adding to iommu group 14
[    0.260906] pci 0000:03:00.0: Adding to iommu group 14
[    0.261044] pci 0000:04:00.0: Adding to iommu group 15
[    0.261145] pci 0000:04:00.1: Adding to iommu group 15
[    0.261247] pci 0000:04:00.2: Adding to iommu group 15
[    0.261348] pci 0000:04:00.3: Adding to iommu group 15
[    0.261446] pci 0000:05:00.0: Adding to iommu group 16
[    0.261546] pci 0000:06:00.0: Adding to iommu group 17
[    0.261643] pci 0000:06:00.1: Adding to iommu group 18
[    0.261741] pci 0000:06:00.3: Adding to iommu group 19
[    0.263408] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[    0.263510] AMD-Vi: Interrupt remapping enabled
[    0.263690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.263771] software IO TLB: mapped [mem 0x00000000b854f000-0x00000000bc54f000] (64MB)
[    0.263956] LVT offset 0 assigned for vector 0x400
[    0.266882] perf: AMD IBS detected (0x000003ff)
[    0.267871] amd_uncore: 4 amd_df counters detected
[    0.267953] amd_uncore: 6 amd_l3 counters detected
[    0.268873] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.276847] AES CTR mode by8 optimization enabled
[    0.277636] Initialise system trusted keyrings
[    0.277720] Key type blacklist registered
[    0.277830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.277918] zbud: loaded
[    0.278269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.278455] NFS: Registering the id_resolver key type
[    0.278534] Key type id_resolver registered
[    0.278608] Key type id_legacy registered
[    0.278689] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.278772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.279189] Key type cifs.spnego registered
[    0.279270] Key type cifs.idmap registered
[    0.279345] ntfs3: Enabled Linux POSIX ACLs support
[    0.279421] ntfs3: Read-only LZX/Xpress compression included
[    0.279507] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.279588] fuse: init (API version 7.42)
[    0.279717] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.280887] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[    0.281153] 9p: Installing v9fs 9p2000 file system support
[    0.292842] xor: automatically using best checksumming function   avx       
[    0.292925] async_tx: api initialized (async)
[    0.293000] Key type asymmetric registered
[    0.293074] Asymmetric key parser 'x509' registered
[    0.293164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.293294] io scheduler mq-deadline registered
[    0.294742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.296957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297078] ACPI: button: Power Button [PWRB]
[    0.297202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297353] ACPI: button: Power Button [PWRF]
[    0.298798] Could not retrieve perf counters (-19)
[    0.935191] Freeing initrd memory: 10440K
[    1.303149] tsc: Refined TSC clocksource calibration: 4092.313 MHz
[    1.303238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afd02006af, max_idle_ns: 440795398031 ns
[    1.303363] clocksource: Switched to clocksource tsc
[    2.324942] ACPI: \_TZ_.TZ10: _PSL evaluation failure
[    2.325331] thermal LNXTHERM:00: registered as thermal_zone0
[    2.325409] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    2.327098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.333185] brd: module loaded
[    2.335494] loop: module loaded
[    2.335716] Key type psk registered
[    2.336014] ahci 0000:01:00.1: version 3.0
[    2.336142] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    2.336276] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    2.336371] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[    2.336452] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.337195] scsi host0: ahci
[    2.337391] scsi host1: ahci
[    2.337579] scsi host2: ahci
[    2.337768] scsi host3: ahci
[    2.337955] scsi host4: ahci
[    2.338149] scsi host5: ahci
[    2.338269] ata1: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680100 irq 35 lpm-pol 3
[    2.338365] ata2: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680180 irq 35 lpm-pol 3
[    2.338461] ata3: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680200 irq 35 lpm-pol 3
[    2.338556] ata4: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680280 irq 35 lpm-pol 3
[    2.338651] ata5: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680300 irq 35 lpm-pol 3
[    2.338747] ata6: SATA max UDMA/133 abar m131072@0xfc680000 port 0xfc680380 irq 35 lpm-pol 3
[    2.339852] scsi host6: pata_legacy
[    2.339966] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    2.644238] ata1: SATA link down (SStatus 0 SControl 330)
[    2.948234] ata2: SATA link down (SStatus 0 SControl 330)
[    3.407120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.407400] ata3.00: Model 'Samsung SSD 860 EVO 1TB', rev 'RVT02B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
[    3.407541] ata3.00: supports DRM functions and may not be fully accessible
[    3.407624] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133
[    3.408385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.414303] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.414715] ata3.00: supports DRM functions and may not be fully accessible
[    3.421771] ata3.00: configured for UDMA/133
[    3.431907] ahci 0000:01:00.1: port does not support device sleep
[    3.432112] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
[    3.432483] ata3.00: Enabling discard_zeroes_data
[    3.432570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.432671] sd 2:0:0:0: [sda] Write Protect is off
[    3.432746] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.432762] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.432897] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.433345] ata3.00: Enabling discard_zeroes_data
[    3.441257]  sda: sda1 sda2 sda3 sda4
[    3.442468] sd 2:0:0:0: [sda] supports TCG Opal
[    3.442543] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.895119] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.895676] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    3.895847] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.896493] ata4.00: configured for UDMA/133
[    3.906779] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    3.907156] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.907249] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.907333] sd 3:0:0:0: [sdb] Write Protect is off
[    3.907409] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.907424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.907546] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.944674]  sdb: sdb1
[    3.944784] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.212236] ata5: SATA link down (SStatus 0 SControl 330)
[    4.516236] ata6: SATA link down (SStatus 0 SControl 330)
[    4.526387] scsi host6: pata_legacy
[    4.526502] ata7: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.689373] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.689484] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    4.744921] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    4.745350] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    4.745459] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    4.745553] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.745709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.745806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.745898] usb usb1: Product: xHCI Host Controller
[    4.745974] usb usb1: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.746054] usb usb1: SerialNumber: 0000:01:00.0
[    4.746283] hub 1-0:1.0: USB hub found
[    4.746373] hub 1-0:1.0: 10 ports detected
[    4.746955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.747083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.747182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.747274] usb usb2: Product: xHCI Host Controller
[    4.747350] usb usb2: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.747430] usb usb2: SerialNumber: 0000:01:00.0
[    4.747610] hub 2-0:1.0: USB hub found
[    4.747693] hub 2-0:1.0: 4 ports detected
[    4.748110] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.748223] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 3
[    4.748939] xhci_hcd 0000:04:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.749211] xhci_hcd 0000:04:00.2: xHCI Host Controller
[    4.749323] xhci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 4
[    4.750538] xhci_hcd 0000:04:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.750775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750866] usb usb3: Product: xHCI Host Controller
[    4.750942] usb usb3: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751023] usb usb3: SerialNumber: 0000:04:00.2
[    4.751197] hub 3-0:1.0: USB hub found
[    4.751278] hub 3-0:1.0: 2 ports detected
[    4.751478] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.751605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.751700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.751791] usb usb4: Product: xHCI Host Controller
[    4.751867] usb usb4: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.751948] usb usb4: SerialNumber: 0000:04:00.2
[    4.752122] hub 4-0:1.0: USB hub found
[    4.752205] hub 4-0:1.0: 4 ports detected
[    4.752505] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.752616] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    4.752819] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
[    4.753240] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.753348] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 6
[    4.753441] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.753569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    4.753663] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.753755] usb usb5: Product: xHCI Host Controller
[    4.753831] usb usb5: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.753911] usb usb5: SerialNumber: 0000:06:00.3
[    4.754109] hub 5-0:1.0: USB hub found
[    4.754191] hub 5-0:1.0: 4 ports detected
[    4.754507] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    4.754730] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754821] usb usb6: Product: xHCI Host Controller
[    4.754897] usb usb6: Manufacturer: Linux 6.14.0-wifislax64 xhci-hcd
[    4.754977] usb usb6: SerialNumber: 0000:06:00.3
[    4.755163] hub 6-0:1.0: USB hub found
[    4.755245] hub 6-0:1.0: 4 ports detected
[    4.755644] usbcore: registered new interface driver uas
[    4.755750] usbcore: registered new interface driver usb-storage
[    4.755886] i8042: PNP: No PS/2 controller found.
[    4.756014] mousedev: PS/2 mouse device common for all mice
[    4.756116] rtc_cmos 00:02: RTC can wake from S4
[    4.756435] rtc_cmos 00:02: registered as rtc0
[    4.756538] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    4.756689] device-mapper: uevent: version 1.0.3
[    4.756801] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    4.756903] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    4.757009] sdhci: Secure Digital Host Controller Interface driver
[    4.757089] sdhci: Copyright(c) Pierre Ossman
[    4.757195] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.757321] hid: raw HID events driver (C) Jiri Kosina
[    4.757478] usbcore: registered new interface driver usbhid
[    4.757556] usbhid: USB HID core driver
[    4.757755] Initializing XFRM netlink socket
[    4.757833] NET: Registered PF_PACKET protocol family
[    4.757965] 9pnet: Installing 9P2000 support
[    4.758050] Key type dns_resolver registered
[    4.759639] microcode: Current revision: 0x08701021
[    4.760030] resctrl: L3 allocation detected
[    4.760108] resctrl: MB allocation detected
[    4.760181] resctrl: L3 monitoring detected
[    4.760287] IPI shorthand broadcast: enabled
[    4.764302] sched_clock: Marking stable (4772001193, -7897740)->(4812288342, -48184889)
[    4.764570] registered taskstats version 1
[    4.764743] Loading compiled-in X.509 certificates
[    4.769982] Demotion targets for Node 0: null
[    4.770154] Key type .fscrypt registered
[    4.770227] Key type fscrypt-provisioning registered
[    4.770688] Btrfs loaded, zoned=yes, fsverity=no
[    4.782130] Key type encrypted registered
[    4.782207] Running certificate verification RSA selftest
[    4.785040] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[    4.785721] RAS: Correctable Errors collector initialized.
[    4.785880] clk: Disabling unused clocks
[    4.785953] PM: genpd: Disabling unused power domains
[    4.787284] Freeing unused decrypted memory: 2028K
[    4.787980] Freeing unused kernel image (initmem) memory: 4136K
[    4.788073] Write protecting the kernel read-only data: 34816k
[    4.788635] Freeing unused kernel image (text/rodata gap) memory: 1008K
[    4.788892] Freeing unused kernel image (rodata/data gap) memory: 948K
[    4.788977] rodata_test: all tests were successful
[    4.789055] Run /init as init process
[    4.789148]   with arguments:
[    4.789149]     /init
[    4.789150]   with environment:
[    4.789152]     HOME=/
[    4.789153]     TERM=linux
[    4.789154]     kbd=es
[    4.789155]     xkb=es
[    4.789157]     locale=es_ES.utf8
[    4.789158]     tz=Europe/Madrid
[    4.789159]     noload=020-Slack_xfce
[    4.789160]     BOOT_IMAGE=/boot/vmlinuz
[    4.814416] udevd[268]: starting eudev-3.2.14
[    4.991110] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    5.045111] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    5.134553] usb 5-1: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00
[    5.134556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.134558] usb 5-1: Product: Bluetooth 5.4 Radio
[    5.134561] usb 5-1: Manufacturer: Realtek
[    5.134563] usb 5-1: SerialNumber: 00E04C239987
[    5.257110] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    5.403553] usb 5-3: New USB device found, idVendor=1bcf, idProduct=08b8, bcdDevice= 1.00
[    5.403556] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.403559] usb 5-3: Product: HID Gaming Mouse
[    5.403561] usb 5-3: Manufacturer: 
[    5.408593] usb 1-1: New USB device found, idVendor=1532, idProduct=023f, bcdDevice= 2.00
[    5.408596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408598] usb 1-1: Product: Razer Cynosa Lite
[    5.408600] usb 1-1: Manufacturer: Razer
[    5.420731] input:   HID Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.0/0003:1BCF:08B8.0001/input/input2
[    5.420795] hid-generic 0003:1BCF:08B8.0001: input,hidraw0: USB HID v1.00 Mouse [  HID Gaming Mouse] on usb-0000:06:00.3-3/input0
[    5.424494] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:1532:023F.0002/input/input3
[    5.427859] input:   HID Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-3/5-3:1.1/0003:1BCF:08B8.0003/input/input4
[    5.505145] hid-generic 0003:1532:023F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input0
[    5.511613] input: Razer Razer Cynosa Lite Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input6
[    5.556182] hid-generic 0003:1BCF:08B8.0003: input,hiddev96,hidraw2: USB HID v1.00 Keyboard [  HID Gaming Mouse] on usb-0000:06:00.3-3/input1
[    5.607144] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.1/0003:1532:023F.0004/input/input7
[    5.607178] hid-generic 0003:1532:023F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input1
[    5.612469] input: Razer Razer Cynosa Lite as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.2/0003:1532:023F.0005/input/input8
[    5.612529] hid-generic 0003:1532:023F.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Cynosa Lite] on usb-0000:01:00.0-1/input2
[    5.668113] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    5.785110] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.808558] usb 5-4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 5.72
[    5.808561] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.808563] usb 5-4: Product: XBOX 360 For Windows
[    5.808565] usb 5-4: Manufacturer: Nintendo Co., Ltd.
[    5.808567] usb 5-4: SerialNumber: 000000000001
[    5.835167] udevd[302]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[    5.836706] udevd[304]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/003 2>/dev/null || :'': No such file or directory
[    5.836726] udevd[305]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[    6.000764] usb 1-2: New USB device found, idVendor=0582, idProduct=012f, bcdDevice= 1.00
[    6.000768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.000770] usb 1-2: Product: QUAD-CAPTURE
[    6.000772] usb 1-2: Manufacturer: Roland
[    6.000774] usb 1-2: SerialNumber: 0000ECB6B3DBCE6E52388C2B1B1260F8
[    6.184111] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    6.410753] usb 1-4: New USB device found, idVendor=0781, idProduct=558a, bcdDevice= 1.00
[    6.410757] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.410759] usb 1-4: Product: Ultra
[    6.410761] usb 1-4: Manufacturer: SanDisk
[    6.410763] usb 1-4: SerialNumber: 0501395467c909f09c2e8ce8ef9550a00fec70ff220778c667c5e760894827d881ae00000000000000000000802a204b001914108a558107af282200
[    6.421803] usb-storage 1-4:1.0: USB Mass Storage device detected
[    6.422918] scsi host6: usb-storage 1-4:1.0
[    6.596112] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[    6.969537] usb 1-6: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[    6.969540] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.969542] usb 1-6: Product: ITE Device
[    6.969544] usb 1-6: Manufacturer: ITE Tech. Inc.
[    6.985414] hid-generic 0003:048D:5702.0006: hiddev97,hidraw5: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-6/input0
[    6.987559] udevd[315]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/005 2>/dev/null || :'': No such file or directory
[    6.987562] udevd[316]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/004 2>/dev/null || :'': No such file or directory
[    6.987676] udevd[318]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/002 2>/dev/null || :'': No such file or directory
[    6.987716] udevd[317]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/003 2>/dev/null || :'': No such file or directory
[    7.451606] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    7.457479] sd 6:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[    7.460825] sd 6:0:0:0: [sdc] Write Protect is off
[    7.460828] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.463826] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.491578]  sdc: sdc1
[    7.491636] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.244198] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.466747] loop0: detected capacity change from 0 to 230960
[   11.479067] loop1: detected capacity change from 0 to 3136
[   11.491253] loop2: detected capacity change from 0 to 1472
[   11.508154] loop3: detected capacity change from 0 to 49344
[   11.543885] loop4: detected capacity change from 0 to 23544
[   11.571883] loop5: detected capacity change from 0 to 696
[   11.591969] loop6: detected capacity change from 0 to 14224
[   11.609972] loop7: detected capacity change from 0 to 5984
[   11.642910] loop8: detected capacity change from 0 to 2216
[   11.688670] loop9: detected capacity change from 0 to 33888
[   11.714726] loop10: detected capacity change from 0 to 27032
[   11.736271] loop11: detected capacity change from 0 to 157880
[   11.766707] loop12: detected capacity change from 0 to 373632
[   11.803221] loop13: detected capacity change from 0 to 2190144
[   11.858556] loop14: detected capacity change from 0 to 225704
[   11.908815] loop15: detected capacity change from 0 to 1489760
[   11.966885] loop16: detected capacity change from 0 to 194568
[   12.030039] loop17: detected capacity change from 0 to 7856
[   12.067877] loop18: detected capacity change from 0 to 333672
[   12.125618] loop19: detected capacity change from 0 to 61064
[   12.181136] loop20: detected capacity change from 0 to 717784
[   12.242397] loop21: detected capacity change from 0 to 270704
[   12.284789] loop22: detected capacity change from 0 to 364632
[   12.309026] loop23: detected capacity change from 0 to 94976
[   12.356923] loop24: detected capacity change from 0 to 233544
[   12.433276] loop25: detected capacity change from 0 to 97096
[   12.506434] loop26: detected capacity change from 0 to 25376
[   12.532388] loop27: detected capacity change from 0 to 328
[   12.572624] loop28: detected capacity change from 0 to 29288
[   13.392218] udevd[1363]: specified group 'lirc' unknown
[   13.409003] udevd[1364]: starting eudev-3.2.14
[   13.422466] udevd[1364]: specified group 'lirc' unknown
[   13.465883] udevd[1413]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/001 2>/dev/null || :'': No such file or directory
[   13.465888] udevd[1411]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/004/001 2>/dev/null || :'': No such file or directory
[   13.465891] udevd[1409]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/002/001 2>/dev/null || :'': No such file or directory
[   13.465897] udevd[1412]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/003/001 2>/dev/null || :'': No such file or directory
[   13.465898] udevd[1410]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/001/001 2>/dev/null || :'': No such file or directory
[   13.465941] udevd[1414]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/006/001 2>/dev/null || :'': No such file or directory
[   13.467282] udevd[1420]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/002 2>/dev/null || :'': No such file or directory
[   13.517196] ccp 0000:06:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   13.517275] ccp 0000:06:00.1: psp enabled
[   13.603291] udevd[1434]: failed to execute '/usr/bin/sh' '/usr/bin/sh -c '/usr/bin/setfacl -m g:lirc:rw /dev/bus/usb/005/004 2>/dev/null || :'': No such file or directory
[   13.614974] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   13.614978] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.614981] RAPL PMU: hw unit of domain core 2^-16 Joules
[   13.615017] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20240827/utaddress-204)
[   13.615027] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   13.680558] tpm_crb MSFT0101:00: Disabling hwrng
[   13.703962] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb5/5-4/5-4:1.0/input/input9
[   13.704181] usbcore: registered new interface driver xpad
[   13.839509] Bluetooth: Core ver 2.22
[   13.839534] NET: Registered PF_BLUETOOTH protocol family
[   13.839536] Bluetooth: HCI device and connection manager initialized
[   13.839541] Bluetooth: HCI socket layer initialized
[   13.839543] Bluetooth: L2CAP socket layer initialized
[   13.839547] Bluetooth: SCO socket layer initialized
[   13.949170] mc: Linux media interface: v0.10
[   13.992873] snd_hda_intel 0000:04:00.1: Disabling MSI
[   13.992891] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[   14.009155] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 18:c0:4d:96:0a:dc, XID 541, IRQ 62
[   14.009161] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   14.011293] usbcore: registered new interface driver btusb
[   14.013570] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   14.015565] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   14.015568] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   14.023751] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input10
[   14.023828] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input11
[   14.024068] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input12
[   14.024554] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card0/input13
[   14.056531] usb 1-2: Quirk or no altset; falling back to MIDI 1.0
[   14.070830] usbcore: registered new interface driver snd-usb-audio
[   14.073584] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[   14.073708] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[   14.088908] MCE: In-kernel MCE decoding enabled.
[   14.090294] Linux agpgart interface v0.103
[   14.133348] intel_rapl_common: Found RAPL domain package
[   14.133351] intel_rapl_common: Found RAPL domain core
[   14.148465] amd_atl: AMD Address Translation Library initialized
[   14.164236] ACPI: bus type drm_connector registered
[   14.340570] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[   14.460370] nouveau 0000:04:00.0: NVIDIA TU116 (168000a1)
[   14.971223] nouveau 0000:04:00.0: bios: version 90.16.20.40.27
[   14.971310] nouveau 0000:04:00.0: vgaarb: deactivate vga console
[   14.972466] Console: switching to colour dummy device 80x25
[   15.010908] nvidia-gpu 0000:04:00.3: i2c timeout error e0000000
[   15.010915] ucsi_ccg 0-0008: i2c_transfer failed -110
[   15.010918] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[   15.010928] ucsi_ccg 0-0008: probe with driver ucsi_ccg failed with error -110
[   16.246071] nouveau 0000:04:00.0: drm: VRAM: 6144 MiB
[   16.246074] nouveau 0000:04:00.0: drm: GART: 536870912 MiB
[   16.291612] nouveau 0000:04:00.0: drm: MM: using COPY for buffer copies
[   16.322852] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[   16.327653] nouveau 0000:04:00.0: [drm] Registered 4 planes with drm panic
[   16.327657] [drm] Initialized nouveau 1.4.0 for 0000:04:00.0 on minor 0
[   16.331988] fbcon: nouveaudrmfb (fb0) is primary device
[   16.394299] Console: switching to colour frame buffer device 240x67
[   16.395507] nouveau 0000:04:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   16.505985] zram: Added device: zram0
[   16.530036] zram0: detected capacity change from 0 to 32626160
[   16.541094] Adding 16313076k swap on /dev/zram0.  Priority:100 extents:1 across:16313076k SS
[   17.756865] NET: Registered PF_INET6 protocol family
[   17.762801] Segment Routing with IPv6
[   17.762803] RPL Segment Routing with IPv6
[   17.762812] In-situ OAM (IOAM) with IPv6
[   18.762047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.762052] Bluetooth: BNEP filters: protocol multicast
[   18.762056] Bluetooth: BNEP socket layer initialized
[   18.762807] Bluetooth: MGMT ver 1.23
[   18.824811] NET: Registered PF_ALG protocol family
[   20.044121] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   20.149768] r8169 0000:03:00.0 eth0: Link is Down
[   20.732759] NET: Registered PF_QIPCRTR protocol family
[   23.568503] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.678470] 8021q: 802.1Q VLAN Support v1.8
[   23.772559] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.772715] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.772843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   31.076924] Bluetooth: RFCOMM TTY layer initialized
[   31.076931] Bluetooth: RFCOMM socket layer initialized
[   31.076937] Bluetooth: RFCOMM ver 1.11
[   32.588623] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.593243] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.593248] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.593253] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.696535] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.698915] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.698918] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.698922] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   32.784264] nouveau 0000:04:00.0: gsp: mmu fault queued
[   32.786637] nouveau 0000:04:00.0: gsp: rc engn:00000001 chid:104 type:31 scope:1 part:233
[   32.786640] nouveau 0000:04:00.0: fifo:001001:000d:0068:[gst-plugin-scan[2434]] errored - disabling channel
[   32.786643] nouveau 0000:04:00.0: gst-plugin-scan[2434]: channel 104 killed!
[   33.111117] Bluetooth: hci0: command 0x0c52 tx timeout
[   33.111117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   33.111127] Bluetooth: hci0: Resetting usb device.
[   35.159117] Bluetooth: hci0: command 0x0c52 tx timeout
[   35.159117] Bluetooth: hci0: Opcode 0x0c52 failed: -110
[   35.159125] Bluetooth: hci0: Resetting usb device.
[   35.273616] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.462603] Bluetooth: hci1: command 0xfc61 tx timeout
[   37.462607] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.462610] Bluetooth: hci1: Resetting usb device.
[   37.462611] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   37.577601] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   37.718550] Bluetooth: hci1: RTL: Failed to generate devcoredump
[   37.720559] Bluetooth: hci1: unexpected event for opcode 0xfc61
[   37.721568] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=dfc6 lmp_ver=0a lmp_subver=d922
[   48.081308] Bluetooth: hci1: RTL: RTL: Read reg16 failed (-110)
[   48.201627] usb 5-1: reset full-speed USB device number 2 using xhci_hcd
[   48.342564] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[   48.344560] Bluetooth: hci1: RTL: rom_version status=0 version=1
[   48.344564] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
[   48.344723] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin
[   48.344755] Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210
[   48.612563] Bluetooth: hci1: RTL: fw version 0xdfc6d922
[   48.711619] Bluetooth: MGMT ver 1.23
wifislax64 ~ #
 
/code]
« Última modificación: 17-04-2025, 02:19 (Jueves) por sol666 »

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #53 en: 17-04-2025, 02:21 (Jueves) »
Pues parece que el kernel no se esta comiendo tampoco la ram ....

Voy a crear maquinas virtuales a ver si consigo replicar el problema ..por que si no , va pa largo,

Desconectado sol666

  • *****
  • Mensajes: 136
Re:Dudas sobre wifislax 4.0
« Respuesta #54 en: 17-04-2025, 02:26 (Jueves) »
Puedes intentar la instalacion , ... y pasamr un modulo con los changes >?¿

Me interesa ver que pasa en la carpeta tmp  , que es la que usa el instalador para crear y leer los parametros.

ok,instalo y cuando se quede pillao voy a sistema,salvar cambios a xzm y lo subo a mega mismo es asi??ya me dices,me voy a dormir que me caigo de sueño,mañana seguimos investigando que esto me supera
« Última modificación: 17-04-2025, 02:29 (Jueves) por sol666 »

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #55 en: 17-04-2025, 02:28 (Jueves) »
Puedes intentar la instalacion , ... y pasamr un modulo con los changes >?¿

Me interesa ver que pasa en la carpeta tmp  , que es la que usa el instalador para crear y leer los parametros.

ok,instalo y cuando se quede pillao voy a sistema,salvar cambios a xzm y lo subo a mega es asi??

si , o puedes coger la carpeta tmp, click derecho crear modulo ...mas rapido.
« Última modificación: 17-04-2025, 02:28 (Jueves) por USUARIONUEVO »

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #56 en: 17-04-2025, 02:57 (Jueves) »
en virtualbox la acabo de instalar tambien en modo EFI , en modo no efi me da error el grub ...  pero ese es otro tema ,  ya que tu no llegas ni al grub.

Desconectado sol666

  • *****
  • Mensajes: 136
Re:Dudas sobre wifislax 4.0
« Respuesta #57 en: 17-04-2025, 23:32 (Jueves) »
hola,,en este wifislax no me sale como en la 2.4 click derecho crear modulo y si voy a sistema salvar cambios a xzm me dice que este script solo funciona en modo live,pero si estoy en modo live  ??? ???

Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #58 en: 18-04-2025, 00:28 (Viernes) »
Yo no se que tienes tu hay liado ....


Desconectado USUARIONUEVO

  • Moderador
  • *
  • Mensajes: 16109
Re:Dudas sobre wifislax 4.0
« Respuesta #59 en: 18-04-2025, 00:47 (Viernes) »