Bueno, pues dejame decirte que no he podido terminar mi Router.
pero respecto a la pregunta que haces. como le puse RQ-client al Touter.
esto es facil...bueno "Facil"
primero poner el Firmware de Gargoyle
posteriormente corres el programa de WinCSP
y con este te conectas al rouer te va pedir el username y password se lo das y te va dar 2 errors ignoralos. y con esto debes entrar a tu Router. ahi te vas a la raiz y solo instalas ahi los programas de RQ-clien tal y como los tienes trabajando ya con IKS privado.
Bueno, Yo asta aqui he llegado no he podido hacerlo correr.
surte!
No se como vayan con esta investigacion pero cheque que los binarios se deben copiar en la carpeta LIB para que puedan correr segun lo pude entente acontinuacion les pongo un copy paste de lo que encontre
dded a port for WRT54G/GL open source linux routers (Broadcom BCM947xx chipset).
The use of OpenWRT on the router is recommended. It could probably work on DD-WRT
also but it is more difficult due to it's non-writable file system.
NOTE: You *must* copy the included libstdc++.so.6 file to the /lib directory,
otherwise it won't run. Also, you may create a /var/rq directory (or whatever you
like) and copy both the binary and configuration file there.NOTE: I tested this port for the WRT54G/GL but i didn't get an IRD to boot
properly due to faulty communication. I'm releasing this port as-is in hopes that
this is a problem with my mod, and to ask for your help on trying this and
reporting if you get it to work.