Seguridad Wireless - Wifi

Suite Seguridad Wireless => Entornos Virtuales => Mensaje iniciado por: davidscylla en 03-07-2009, 21:13 (Viernes)

Título: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: davidscylla en 03-07-2009, 21:13 (Viernes)
esq nose como configurarla y keria q me ayudaran....
he hecho una emulacion para windows y en el programa VMware Workstation
puse para agregar los usb q estaban puestos en el ordenador pero no me sale...esq kiero ver el nombre que sale al poner iwconfig  pero no me sale nada...nose si la tarjeta no es compatible...aki les dejo el nombre   Wireless NLite High Gain USB Adapter
podrian ayudarme....
Título: Re: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: uNbAs en 03-07-2009, 21:15 (Viernes)
Con la informacion que das no .....

Prueba lsmod, dmesg y cuanta mas informacion des mejor ayuda recibiras.
Título: Re: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: davidscylla en 03-07-2009, 21:20 (Viernes)
pero que hago con eso me salen un monton de palabras...y que informacion puedo dar para que sea de ayuda...
En esta pagina esta el modelo exacto...si se pudieran tomar la molestia de ver
se los agradeceria.....bueno gracias igualemente....
http://www./usb/802-11n/usb-edimax-nlite-802-11n-150mbps-antena-3dbi-base-usb/prod_2046.html
Título: Re: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: drvalium en 04-07-2009, 00:30 (Sábado)
buenas

necesito saber si te aparece en los dispositivos USB de VMware

http://www.wifislax.com/manuales/emulacion/emulacion_011.php

de todas formas me ha parecido que es adaptador es un protocolo N, con lo que pocas auditorias vas hacer.

si te lo reconoce VMware necesito lo que te pedía uNbAs, escribes en la consola lsmod y después  dmesg y pones aquí todo lo que salga, lo de "salen un montón de palabras" no sirve.

no es necesario que lo escribas, puedes copiar el contenido de la consola y pegarlo en un archivo de texto.

un saludo
Título: Re: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: davidscylla en 04-07-2009, 13:13 (Sábado)
Si me reconoce los dispositivos USB y esto es lo que me sale poniendo lo que me dijeron:

wifislax ~ # lsmod
Module                  Size  Used by
usb_storage            83136  0
snd_seq_oss            28928  0
snd_seq_midi_event      5888  1 snd_seq_oss
snd_seq                43504  4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            41536  0
snd_mixer_oss          14848  1 snd_pcm_oss
ipv6                  229856  14
ohci_hcd               19852  0
intel_agp              21532  1
shpchp                 30240  0
ata_generic             5512  0
uhci_hcd               22292  0
i2c_piix4               7700  0
i2c_core               17680  1 i2c_piix4
pcnet32                29476  0
snd_ens1371            20640  2
gameport               11272  1 snd_ens1371
snd_rawmidi            18496  1 snd_ens1371
snd_seq_device          6540  3 snd_seq_oss,snd_seq,snd_rawmidi
snd_ac97_codec         95148  1 snd_ens1371
ac97_bus                2176  1 snd_ac97_codec
snd_pcm                68496  4 snd_pcm_oss,snd_ens1371,snd_ac97_codec
snd_timer              19208  3 snd_seq,snd_pcm
snd                    43364  12 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_ens1371,snd_ra
wmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
soundcore               5984  1 snd
snd_page_alloc          7688  1 snd_pcm
ehci_hcd               30616  0
pcmcia                 31272  0
yenta_socket           24476  0
rsrc_nonstatic         11276  1 yenta_socket
pcmcia_core            34360  3 pcmcia,yenta_socket,rsrc_nonstatic
capability              3468  0
commoncap               5376  1 capability
fuse                   38804  0
agpgart                29104  1 intel_agp
lp                      9928  0
parport_pc             24676  0
parport                30536  2 lp,parport_pc
pcspkr                  2432  0
psmouse                35872  0

wifislax ~ # dmesg
HIGHMEM available.
396MB LOWMEM available.
Entering add_active_range(0, 0, 101376) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   101376
  HighMem    101376 ->   101376
early_node_map[1] active PFN ranges
    0:        0 ->   101376
On node 0 totalpages: 101376
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 760 pages used for memmap
  Normal zone: 96520 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
DMI present.
Allocating PCI resources starting at 20000000 (gap: 18c00000:e6000000)
Built 1 zonelists.  Total pages: 100584
Kernel command line: root=/dev/sda1 ro vga=791 splash=silent acpi=off nobluetooth nopmcia
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2666.796 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 394772k/405504k available (4342k kernel code, 10148k reserved, 1552k data, 312k init, 0k
highmem)
virtual kernel memory layout:
    fixmap  : 0xfffea000 - 0xfffff000   (  84 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd9800000 - 0xff7fe000   ( 607 MB)
    lowmem  : 0xc0000000 - 0xd8c00000   ( 396 MB)
      .init : 0xc06c4000 - 0xc0712000   ( 312 kB)
      .data : 0xc053d840 - 0xc06c1b74   (1552 kB)
      .text : 0xc0100000 - 0xc053d840   (4342 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5341.95 BogoMIPS (lpj=10683907)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0febfbff 20100000 00000000 00000000 00002211 00000000 00000001
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: After all inits, caps: 0febfbff 20100000 00000000 00003940 00002211 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 08
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread D8AC6A30 could not acquire Mutex [1] [200
70126]
No dock devices found.
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread D8AC6A30 could not acquire Mutex [1] [200
70126]
PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
Boot video device is 0000:00:0f.0
PCI: Transparent bridge - 0000:00:11.0
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:11.0
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:11.0
  IO window: 2000-2fff
  MEM window: e8900000-e89fffff
  PREFETCH window: 20000000-200fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Found IRQ 10 for device 0000:00:11.0
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 63k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/O].
JFS: nTxBlock = 3085, nTxLock = 24685
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ALI M7101 PMU not found.
vesafb: framebuffer at 0xf0000000, mapped to 0xd9a00000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
Attansic L1 Ethernet Network Driver - version 2.0.7
Copyright(c) 2005-2006 Attansic Corporation.
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide1...
hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdc: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:10.0
scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x1080, IRQ Channel: 11/Level
scsi0:   PCI Bus: 0, Device: 16, Address: 0xE8801000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi0 : BusLogic BT-958
scsi 0:0:0:0: Direct-Access     VMware,  VMware Virtual S 1.0  PQ: 0 ANSI: 2
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
<6>QLogic Fibre Channel HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.11
Copyright(c) 2004-2006 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
        with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
st: Version 20070203, fixed bufsize 32768, s/g segs 256
SCSI device sda: 16777216 512-byte hdwr sectors (8590 MB)
sda: Write Protect is off
sda: Mode Sense: 5d 00 00 00
sda: cache data unavailable
sda: assuming drive cache: write through
SCSI device sda: 16777216 512-byte hdwr sectors (8590 MB)
sda: Write Protect is off
sda: Mode Sense: 5d 00 00 00
sda: cache data unavailable
sda: assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
usbmon: debugfs is not available
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006<6>usbcore: registered new interface driver berry_charge
usbcore: registered new interface driver iowarrior
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    531 MB/s
raid6: int32x2    490 MB/s
raid6: int32x4    394 MB/s
raid6: int32x8    330 MB/s
Clocksource tsc unstable (delta = 1048123131 ns)
Time: pit clocksource has been installed.
raid6: mmxx1     1606 MB/s
raid6: mmxx2     1715 MB/s
raid6: sse1x1    1021 MB/s
raid6: sse1x2    1159 MB/s
raid6: sse2x1    1936 MB/s
raid6: sse2x2    3400 MB/s
raid6: using algorithm sse2x2 (3400 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3105.000 MB/sec
raid5: using function: pIII_sse (3105.000 MB/sec)
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Couldn't find valid RAM disk image starting at 0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: sda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 615337
ext3_orphan_cleanup: deleting unreferenced inode 615342
ext3_orphan_cleanup: deleting unreferenced inode 615341
EXT3-fs: sda1: 3 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 312k freed
Adding 1791236k swap on /dev/sda2.  Priority:-1 extents:1 across:1791236k
EXT3 FS on sda1, internal journal
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
input: PC Speaker as /class/input/input3
lp: driver loaded but no devices found
Linux agpgart interface v0.102 (c) Dave Jones
fuse init (API version 7.8)
Capability LSM initialized
Databook TCIC-2 PCMCIA probe: not found.
ehci_hcd 0000:02:02.0: EHCI Host Controller
ehci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:02:02.0
ehci_hcd 0000:02:02.0: irq 5, io mem 0xe8900000
ehci_hcd 0000:02:02.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de
pcnet32: PCnet/PCI II 79C970A at 0x2000, 00 0c 29 e9 18 d6 assigned IRQ 10.
eth0: registered as PCnet/PCI II 79C970A
pcnet32: 1 cards_found.
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
USB Universal Host Controller Interface driver v3.0
PCI: setting IRQ 9 as level-triggered
PCI: Found IRQ 9 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.2: irq 9, io base 0x00001060
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 256M @ 0x0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: not running at top speed; connect to a high speed hub
usb 2-1: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 7 ports detected
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 3:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
sd 3:0:0:0: Attached scsi removable disk sdb
scsi 3:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
sd 3:0:0:1: Attached scsi removable disk sdc
scsi 3:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
sd 3:0:0:2: Attached scsi removable disk sdd
scsi 3:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 3:0:0:3: Attached scsi removable disk sde
usb-storage: device scan complete
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access     takeMS   Mem-drive Mini   8.07 PQ: 0 ANSI: 2
SCSI device sdf: 16472064 512-byte hdwr sectors (8434 MB)
sdf: Write Protect is off
sdf: Mode Sense: 03 00 00 00
sdf: assuming drive cache: write through
SCSI device sdf: 16472064 512-byte hdwr sectors (8434 MB)
sdf: Write Protect is off
sdf: Mode Sense: 03 00 00 00
sdf: assuming drive cache: write through
 sdf: unknown partition table
sd 4:0:0:0: Attached scsi removable disk sdf
usb-storage: device scan complete
Título: Re: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: drvalium en 04-07-2009, 22:20 (Sábado)
buenas

ahí no aparece y eso es malo.

no he conseguido encontrar que chip usa, pero si tu tarjeta es esta, no creo que sea compatible, los adaptadores con protocolo N no funcionan salvo un par de excepciones.

http://www.edimax.es/es/produce_detail.php?pd_id=255&pl1_id=1&pl2_id=44

También he visto que ese adaptador no esta en la zona de los validos para usar el modo monitor, los adaptadores de comprawifi que son compatibles son estos.

http://www./usb/aircrack/cat_144.html


saludos
Título: Re: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: davidscylla en 05-07-2009, 15:52 (Domingo)
entonces los que son compatibles son esos que dicen aircrack...i las que dicen modo monitor....pero si dicen modo monitor solo en Linux tambn sirven para la emulacion...me recomendarias alguno de los que salen alli....
bueno muchas gracias x todo....
Título: Re: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: drvalium en 05-07-2009, 17:28 (Domingo)
Citar
pero si dicen modo monitor solo en Linux tambn sirven para la emulacion

si lo que virtualizas es un Linux si que sirven.

recomendarte te recomendaría la Edimax EW7318USG  pero está fuera de stock, las otras no las he probado.


un saludo

Título: Re: Como agregar mi Tarjeta wireless a WifiSlax
Publicado por: davidscylla en 05-07-2009, 20:09 (Domingo)
como se mide exactamente la capacidad de los aparatos Wifi...para tener un idea mas o menos...