Seguridad Wireless - Wifi
Equipos y materiales => Puntos de acceso, routers, switchs y bridges => Dd-wrt => Mensaje iniciado por: javier456 en 16-05-2013, 22:13 (Jueves)
-
hola tengo un tp-link 841n he leido que se le puede poner dd-wrt, pero queria informarme aqui, porque la version del software del tplink es la 8.4, me valdria la actualizacion 8 del ddwrt.
-
pues le he metido el primer archivo de la version 8 el "factory-to-ddwrt" y ya no puedo acceder al router le pongo 192.169.1.1 y no sale nada solo tiene encendida una luz alguien me puede ayudar.
-
pues le he metido el primer archivo de la version 8 el "factory-to-ddwrt" y ya no puedo acceder al router le pongo 192.169.1.1 y no sale nada solo tiene encendida una luz alguien me puede ayudar.
No es 169, es 168, sería así:
192.168.1.1
Un saludo.
-
ya, ha sido un error de escritura pongo 192.168.1.1
-
Tienes la IP y puerta de enlace de tu ordenador en auto o manualmente?
-
gracias por contestar.
he probado de las dos formas y no conecta.
-
he leido en el hilo del "Ddwrt en Tp-link wr740n" y les ha pasado tambien lo mismo, pero no pone como recuperarlo, le he hecho un hard reset y sigue con el led de encendido solo pero no me deja entrar
-
he leido en el hilo del "Ddwrt en Tp-link wr740n" y les ha pasado tambien lo mismo, pero no pone como recuperarlo, le he hecho un hard reset y sigue con el led de encendido solo pero no me deja entrar
Para recuperarlo hay un tuto aquí:
https://forum.openwrt.org/viewtopic.php?id=37010&p=4
Espero que te sirva.
Un saludo.
-
hola pepe10000 te refieres a esto:
undermonster wrote:
I Unbricked my WR841N v8.2 - without hardware hacks.
I will explain how to revert to STOCK firmware.
Must Understand!!!
You cannot copy a file over Telnet with ease.
I installed xampp on my PC, and then put the factory .bin in the htdocs folder.
Use google to find the location of the HTDOCS folder for your OS.
Windows is: C:\xampp\htdocs\
Then I started the apache service.
This allowed me to transfer the file via HTTP, or more specifically using the command wget.
Getting the router Ready
1) Connect ETHERNET cable to your router, in the WAN port (blue)
2) Turn Router ON. Press the WPS/Reset button many times.
3) Wait for LED under gear icon to flash rapidly.
Your router is in Recovery Mode now.
Connecting to the router via telnet
1) Set your Computer IP to 192.168.1.2 (Ethernet, not WiFi)
2) Open CMD/Terminal
3) Type: ping 192.168.1.1
4) Wait for PING to respond (Not failed response). Cancel pinging (CTRL + C)
5) Type: telnet 192.168.1.1
6) openWRT in Recovery Mode does not require username/password!
You are now accessing the router via telnet.
Transferring stock firmware to the router
You should be connected in a telnet session now!
Assuming you have set up xampp on your PC!
1) Type: cd /tmp
2) Type: wget http://192.168.1.2/wr841nv8_en_3_13_18_up(120522).bin
3) Type: mv wr841nv8_en_3_13_18_up(120522).bin tplink.bin
You have now transferred the stock firmware to the router.
Flashing the router with the firmware
1) Type: mtd -r write /tmp/tplink.bin firmware
2) Wait for "Reboot" message. If error message appears, manually reboot.
You are now using stock firmware.
Your router is now back to Factory Defaults.
Disconnect the ethernet cable from WAN and insert to LAN-1.
Set your PC to assign IP via DHCP.
es que no entiendo no hay un manual en español, no se por donde empezar.
-
hola pepe10000 te refieres a esto:
https://forum.openwrt.org/viewtopic.php?id=37010&p=4
es que no entiendo no hay un manual en español, no se por donde empezar.
Exacto, eso mismo.
Yo tampoco hablo Ingles, pero usa el traductor de Goole por ejemplo y ya podrás comprender mejor el proceso:
http://translate.google.es/?hl=es&tab=wT
Un saludo.
-
no se cual es el archivo de fabrica que tengo que descargar se refiere al de open-wrt o al de tp-link
-
Conecte el cable Ethernet al router, en el puerto WAN (azul) Página 2) Encienda el router. Pulse el WPS / Reset botón varias veces. Página 3) Espere LED debajo icono de engranaje a parpadear rápidamente.: Su router está en modo de recuperación ahora.
no puedo entrar en modo recuperacion, lo enciendo, le pulso repetidamente reset, y al rato se enciende led del candado y luego todos, pero el del engranaje no se enciende.
-
el router ya no vale, no hay solucion