Seguridad Wireless - Wifi
Suite Seguridad Wireless => Colaboracion y desarrollo de nuestras lives => Mensaje iniciado por: USUARIONUEVO en 14-04-2012, 07:48 (Sábado)
-
bueno , pues vamos alla con la prueba 2
http://www.downloadwireless.net/isos-fase-testing/wifislax-4.1/wifislax-4.1-beta-2.iso
añadirle ademas para las broadcom
http://downloadwireless.net/modulos-fase-testing/wifislax-4.1/firmwares-broadcom.xzm
los cambios con respecto a wifislax 4.0 son:
* changelog wifislax 4.1
-movida libreria binutils a modulo core para que ark pueda abrir ficheros .deb sin el devel
-actualizado kernel a version 3.3.0 (drivers android compilados)
-añadido soporte para particiones EXT4
-retocado menu-config por tema office que no se mostraba la categoria
-añadido rpm2xzm
-actualizados firmwares broadcom y añadido alguno mas
-añadido b43-fwcutter-015
-actualizado libtheora a 1.1.1
-reconfigurado record my desktop para libtheora 1.1.1
-añadida jack-audio-connection-kit-0.121.3-i486-1sl
-añadido kpackage-3.5.9-2
-fix knemo en autostart-actualizada suite aircrack-ng a revision r2150
-añadido wifite 2 con soporte wps beta 9
-----06-04-2012---------
-actualizado kernel a version 3.3.1
-actualizado wireshark a version 1.6.6
----14-04-2012------
-actualizado kernel a version 3.3.2
-actualizado wireshark a version 1.6.7
-actualizado flashplayer a version 11.2-r202
-actualizado iw a version 3.4
-añadido aircrack-ng auto-updater
-
pequeño recordatorio ....
1-arrancar y comprobar si aparece....
en caso negativo , deberemos ir probando a montar y desmontar drivers ...hasta que aparezca.
desmiontar = rmmod
montar = modprobe
nombre de los drivers a probar
b43
brcmsmac
posiblemente el sistema intente usar primero el b43 ... y ojala al estar el otro ( brcmsmac que antes no estaba ) , ya si funcione todo bien, por que ese, es el que da soporte a los chips n.
de no ser asi..
rmmod b43
modprobe brcmsmac
cuando hagais pruebas de montar un driver y desmontar otro , ir mirando con
iwconfig
si no aparece ., seguid con los cambios de drivers.
yo espero que aparezac sin hacer nada , pero ya se vera que pasa.
-
yo espero que aparezac sin hacer nada , pero ya se vera que pasa.
Descargada, primer inicio sin ningún aditamento ni la Alfa
wifislax ~ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifislax ~ # modprobe b43
wifislax ~ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifislax ~ # rmmod b43
wifislax ~ # modprobe brcmsmac
wifislax ~ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifislax ~ #
Se hace la dificil... ;D ;D
-
despues de cada intenta , mira de hacer
dmesg
para ver de que se queja...
estoy me esta desmoralizando ya... :'(
-
recien arrancado el sistema, ...puedes copiarme el contenido de hacer
lsmod
lsmod = lista de drivers que carga el sistema.
-
b43
[spoiler]wifislax ~ # dmesg
:02: [io 0xfe00-0xfefe] has been reserved
[ 0.147685] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.147802] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.147920] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.148053] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.148170] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.148286] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.148404] system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.148521] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.148604] pnp 00:03: [irq 12]
[ 0.148698] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.148750] pnp 00:04: [io 0x0060]
[ 0.148755] pnp 00:04: [io 0x0064]
[ 0.148772] pnp 00:04: [irq 1]
[ 0.148867] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.148900] pnp 00:05: [dma 4]
[ 0.148904] pnp 00:05: [io 0x0000-0x000f]
[ 0.148908] pnp 00:05: [io 0x0081-0x0083]
[ 0.148912] pnp 00:05: [io 0x0087]
[ 0.148915] pnp 00:05: [io 0x0089-0x008b]
[ 0.148918] pnp 00:05: [io 0x008f]
[ 0.148922] pnp 00:05: [io 0x00c0-0x00df]
[ 0.149016] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.149035] pnp 00:06: [io 0x0070-0x0071]
[ 0.149045] pnp 00:06: [irq 8]
[ 0.149153] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.149197] pnp 00:07: [io 0x0061]
[ 0.149390] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.149664] pnp 00:08: [io 0x0010-0x001f]
[ 0.149668] pnp 00:08: [io 0x0022-0x003f]
[ 0.149672] pnp 00:08: [io 0x0062-0x0063]
[ 0.149675] pnp 00:08: [io 0x0065-0x006f]
[ 0.149679] pnp 00:08: [io 0x0072-0x007f]
[ 0.149682] pnp 00:08: [io 0x0080]
[ 0.149686] pnp 00:08: [io 0x0084-0x0086]
[ 0.149689] pnp 00:08: [io 0x0088]
[ 0.149692] pnp 00:08: [io 0x008c-0x008e]
[ 0.149696] pnp 00:08: [io 0x0090-0x009f]
[ 0.149699] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.149703] pnp 00:08: [io 0x00b1]
[ 0.149706] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.149709] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.149713] pnp 00:08: [io 0x040b]
[ 0.149716] pnp 00:08: [io 0x04d6]
[ 0.149719] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.149722] pnp 00:08: [io 0x0c14]
[ 0.149726] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.149729] pnp 00:08: [io 0x0c52]
[ 0.149732] pnp 00:08: [io 0x0c6c]
[ 0.149735] pnp 00:08: [io 0x0c6f]
[ 0.149739] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.149742] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.149746] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.149749] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.149752] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.149756] pnp 00:08: [io 0x0b00-0x0b3f]
[ 0.149759] pnp 00:08: [io 0x0800-0x089f]
[ 0.149763] pnp 00:08: [io 0x0000-0xffffffff disabled]
[ 0.149767] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.149770] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.149773] pnp 00:08: [io 0x0900-0x090f]
[ 0.149777] pnp 00:08: [io 0x0910-0x091f]
[ 0.149780] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.149784] pnp 00:08: [io 0x0060-0x005f disabled]
[ 0.149788] pnp 00:08: [io 0x0064-0x0063 disabled]
[ 0.149792] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[ 0.149796] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.149799] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.149803] pnp 00:08: [mem 0xfed40000-0xfed44fff]
[ 0.149807] pnp 00:08: [mem 0xfed80000-0xfed80fff]
[ 0.149810] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[ 0.150037] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.150162] system 00:08: [io 0x040b] has been reserved
[ 0.150276] system 00:08: [io 0x04d6] has been reserved
[ 0.150392] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.150506] system 00:08: [io 0x0c14] has been reserved
[ 0.150621] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.150732] system 00:08: [io 0x0c52] has been reserved
[ 0.150846] system 00:08: [io 0x0c6c] has been reserved
[ 0.150958] system 00:08: [io 0x0c6f] has been reserved
[ 0.151098] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.151212] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.151325] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.151438] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.151551] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.151664] system 00:08: [io 0x0b00-0x0b3f] could not be reserved
[ 0.151778] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.151892] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.152018] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.152132] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.152244] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.152360] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.152476] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.152592] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.152706] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.152821] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.152938] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.152957] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.152975] pnp 00:09: [irq 13]
[ 0.153096] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.153289] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.153573] pnp 00:0b: [mem 0xa8000000-0xbfffffff]
[ 0.153782] system 00:0b: [mem 0xa8000000-0xbfffffff] has been reserved
[ 0.153901] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.154159] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.154358] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.154385] pnp: PnP ACPI: found 13 devices
[ 0.154504] ACPI: ACPI bus type pnp unregistered
[ 0.154616] PnPBIOS: Disabled by ACPI PNP
[ 0.197500] PCI: max bus depth: 1 pci_try_num: 2
[ 0.197557] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.197694] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.197826] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.197951] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.198127] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.198259] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.198396] pci 0000:00:15.0: PCI bridge to [bus 04-06]
[ 0.198519] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.198638] pci 0000:00:15.0: bridge window [mem 0xfde00000-0xfe7fffff]
[ 0.198758] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.198950] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[ 0.199077] pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.199263] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.199267] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.199272] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.199276] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.199282] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.199286] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.199290] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.199295] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.199299] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.199303] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.199307] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.199312] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.199316] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfe7fffff]
[ 0.199321] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.199325] pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.199374] NET: Registered protocol family 2
[ 0.199594] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.199858] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.200747] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.201235] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.201403] TCP reno registered
[ 0.201515] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201640] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201859] NET: Registered protocol family 1
[ 0.202064] pci 0000:00:01.0: Boot video device
[ 0.892488] PCI: CLS 64 bytes, default 64
[ 0.892575] Trying to unpack rootfs image as initramfs...
[ 0.894085] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.896531] Freeing initrd memory: 1852k freed
[ 0.898586] perf: AMD IBS detected (0x000000ff)
[ 0.900158] highmem bounce pool size: 64 pages
[ 0.907621] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.908264] fuse init (API version 7.18)
[ 0.908703] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.909992] aufs 3.3-20120402
[ 0.910185] msgmni has been set to 1717
[ 0.910614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.910866] io scheduler noop registered
[ 0.910997] io scheduler cfq registered (default)
[ 0.912491] isapnp: Scanning for PnP cards...
[ 1.306801] isapnp: No Plug & Play device found
[ 1.358900] brd: module loaded
[ 1.439449] loop: module loaded
[ 1.440528] ahci 0000:00:11.0: version 3.0
[ 1.440671] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.440933] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.441932] scsi0 : ahci
[ 1.442526] ata1: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
[ 1.449148] scsi1 : pata_legacy
[ 1.449470] ata2: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 1.900352] Refined TSC clocksource calibration: 1646.493 MHz.
[ 1.900490] Switching to clocksource tsc
[ 1.902294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.217394] ata1.00: ATA-8: ST9500325AS, 0003SDM1, max UDMA/133
[ 2.217575] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.220449] ata1.00: configured for UDMA/133
[ 2.220813] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0003 PQ: 0 ANSI: 5
[ 2.221761] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.222160] sd 0:0:0:0: [sda] Write Protect is off
[ 2.222334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.222368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.249891] sda: sda1 sda2 sda3 sda4
[ 2.251145] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.252497] scsi2 : pata_legacy
[ 2.252803] ata3: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 2.405457] Fusion MPT base driver 3.04.20
[ 2.405634] Copyright (c) 1999-2008 LSI Corporation
[ 2.405770] Fusion MPT SPI Host driver 3.04.20
[ 2.406073] Fusion MPT FC Host driver 3.04.20
[ 2.406339] Fusion MPT SAS Host driver 3.04.20
[ 2.406726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.406971] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.407133] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.407393] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.407667] QUIRK: Enable AMD PLL fix
[ 2.407684] ehci_hcd 0000:00:12.2: debug port 1
[ 2.407833] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4a000
[ 2.413063] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.413631] hub 1-0:1.0: USB hub found
[ 2.413826] hub 1-0:1.0: 5 ports detected
[ 2.414188] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.414321] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.414578] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.414864] ehci_hcd 0000:00:13.2: debug port 1
[ 2.415015] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb48000
[ 2.421054] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.421589] hub 2-0:1.0: USB hub found
[ 2.424579] hub 2-0:1.0: 5 ports detected
[ 2.424861] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.425097] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.425220] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.425494] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
[ 2.480592] hub 3-0:1.0: USB hub found
[ 2.480782] hub 3-0:1.0: 5 ports detected
[ 2.481130] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.481261] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 2.481536] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb49000
[ 2.536700] hub 4-0:1.0: USB hub found
[ 2.536889] hub 4-0:1.0: 5 ports detected
[ 2.537288] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.537753] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 2.537893] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 2.545152] xhci_hcd 0000:07:00.0: irq 18, io mem 0xfe800000
[ 2.545366] xhci_hcd 0000:07:00.0: irq 40 for MSI/MSI-X
[ 2.545378] xhci_hcd 0000:07:00.0: irq 41 for MSI/MSI-X
[ 2.545389] xhci_hcd 0000:07:00.0: irq 42 for MSI/MSI-X
[ 2.545755] xHCI xhci_add_endpoint called for root hub
[ 2.545759] xHCI xhci_check_bandwidth called for root hub
[ 2.545848] hub 5-0:1.0: USB hub found
[ 2.546036] hub 5-0:1.0: 2 ports detected
[ 2.546252] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 2.546379] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 2.550482] xHCI xhci_add_endpoint called for root hub
[ 2.550486] xHCI xhci_check_bandwidth called for root hub
[ 2.550609] hub 6-0:1.0: USB hub found
[ 2.550803] hub 6-0:1.0: 2 ports detected
[ 2.555202] Initializing USB Mass Storage driver...
[ 2.555473] usbcore: registered new interface driver usb-storage
[ 2.555645] USB Mass Storage support registered.
[ 2.555865] usbcore: registered new interface driver ums-alauda
[ 2.556218] usbcore: registered new interface driver ums-cypress
[ 2.556497] usbcore: registered new interface driver ums-datafab
[ 2.556727] usbcore: registered new interface driver ums_eneub6250
[ 2.556913] usbcore: registered new interface driver ums-freecom
[ 2.557105] usbcore: registered new interface driver ums-isd200
[ 2.557286] usbcore: registered new interface driver ums-jumpshot
[ 2.557462] usbcore: registered new interface driver ums-karma
[ 2.557632] usbcore: registered new interface driver ums-onetouch
[ 2.557811] usbcore: registered new interface driver ums-realtek
[ 2.557980] usbcore: registered new interface driver ums-sddr09
[ 2.558177] usbcore: registered new interface driver ums-sddr55
[ 2.558348] usbcore: registered new interface driver ums-usbat
[ 2.558620] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.576595] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.576787] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.577770] rtc_cmos 00:06: RTC can wake from S4
[ 2.578134] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.578300] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.578783] EISA: Probing bus 0 at eisa.0
[ 2.578960] EISA: Cannot allocate resource for mainboard
[ 2.579106] Cannot allocate resource for EISA slot 1
[ 2.579228] Cannot allocate resource for EISA slot 2
[ 2.579351] Cannot allocate resource for EISA slot 3
[ 2.579474] Cannot allocate resource for EISA slot 4
[ 2.579596] Cannot allocate resource for EISA slot 5
[ 2.579718] Cannot allocate resource for EISA slot 6
[ 2.579831] Cannot allocate resource for EISA slot 7
[ 2.579944] Cannot allocate resource for EISA slot 8
[ 2.580089] EISA: Detected 0 cards.
[ 2.580213] cpuidle: using governor ladder
[ 2.580326] cpuidle: using governor menu
[ 2.580774] usbcore: registered new interface driver usbhid
[ 2.580938] usbhid: USB HID core driver
[ 2.581411] ashmem: initialized
[ 2.581648] logger: created 256K log 'log_main'
[ 2.581849] logger: created 256K log 'log_events'
[ 2.582045] logger: created 256K log 'log_radio'
[ 2.582232] logger: created 256K log 'log_system'
[ 2.582537] fujitsu-tablet: Unknown (using defaults)
[ 2.582855] TCP cubic registered
[ 2.583040] NET: Registered protocol family 17
[ 2.583172] Using IPI No-Shortcut mode
[ 2.583541] registered taskstats version 1
[ 2.584376] rtc_cmos 00:06: setting system clock to 2012-04-14 17:11:12 UTC (1334423472)
[ 2.595077] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.606087] RAMDISK: xz image found at block 0
[ 2.993096] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[ 3.068259] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[ 3.068743] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[ 3.068929] VFS: Mounted root (ext4 filesystem) on device 1:0.
[ 3.069165] Freeing unused kernel memory: 444k freed
[ 3.069565] BFS CPU scheduler v0.420 by Con Kolivas.
[ 3.150605] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input1
[ 3.150772] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0
[ 3.377068] usb 3-5: new full-speed USB device number 3 using ohci_hcd
[ 3.639301] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 3.757484] scsi3 : usb-storage 2-2:1.0
[ 3.860137] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 4.367414] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 4.889412] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 5.652272] sd 3:0:0:0: [sdb] 31586304 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 5.653168] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.653185] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5.654184] sd 3:0:0:0: [sdb] No Caching mode page present
[ 5.654200] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 5.658272] sd 3:0:0:0: [sdb] No Caching mode page present
[ 5.658281] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 5.659922] sdb: sdb1
[ 5.664185] sd 3:0:0:0: [sdb] No Caching mode page present
[ 5.664192] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 5.664198] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 6.272886] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 16.902606] udev[2428]: starting version 165
[ 18.186658] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.186767] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 18.532471] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[ 18.560382] mousedev: PS/2 mouse device common for all mice
[ 18.934628] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 18.934652] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 18.937107] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 18.947092] bcma: Bus registered
[ 19.211718] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 19.211808] ACPI: Power Button [PWRB]
[ 19.211929] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 19.216846] ACPI: Lid Switch [LID]
[ 19.217024] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 19.217151] ACPI: Sleep Button [SLPB]
[ 19.217297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 19.217362] ACPI: Power Button [PWRF]
[ 19.362724] wmi: Mapper loaded
[ 19.495637] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMRG 1 (20120111/utaddress-251)
[ 19.495654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.562185] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 19.562330] ACPI: AC Adapter [AC0] (off-line)
[ 19.563874] ACPI: acpi_idle registered with cpuidle
[ 19.573223] thermal LNXTHERM:00: registered as thermal_zone0
[ 19.573230] ACPI: Thermal Zone [TZ00] (61 C)
[ 19.660589] Bluetooth: Core ver 2.16
[ 19.660625] NET: Registered protocol family 31
[ 19.660629] Bluetooth: HCI device and connection manager initialized
[ 19.660635] Bluetooth: HCI socket layer initialized
[ 19.660638] Bluetooth: L2CAP socket layer initialized
[ 19.660647] Bluetooth: SCO socket layer initialized
[ 19.720709] Linux media interface: v0.10
[ 19.916683] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 20.063923] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 20.063939] ACPI: Battery Slot [BAT0] (battery present)
[ 20.076286] acpi device:44: registered as cooling_device2
[ 20.076423] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 20.076511] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.091681] Linux agpgart interface v0.103
[ 20.093097] usbcore: registered new interface driver btusb
[ 20.252413] Linux video capture interface: v2.00
[ 20.388000] cfg80211: Calling CRDA to update world regulatory domain
[ 20.449272] [drm] Initialized drm 1.1.0 20060810
[ 20.671224] asus_wmi: ASUS WMI generic driver loaded
[ 20.776793] cfg80211: World regulatory domain updated:
[ 20.776802] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.776808] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[ 20.883483] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 20.959334] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[ 20.962661] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400
[ 20.977809] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input7
[ 20.977928] usbcore: registered new interface driver uvcvideo
[ 20.977933] USB Video Class driver (1.1.1)
[ 21.042858] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 21.200249] asus_wmi: Initialization: 0x0
[ 21.200301] asus_wmi: BIOS WMI version: 0.9
[ 21.200399] asus_wmi: SFUN value: 0x0
[ 21.202183] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[ 21.214330] asus_wmi: Backlight controlled by ACPI video driver
[ 21.273189] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[ 21.277349] ieee80211 phy0: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 21.277358] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[ 21.277369] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[ 21.277405] brcms_module_init: register returned 0
[ 21.336806] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 21.336979] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 21.354199] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 21.354513] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 21.442255] [drm] radeon defaulting to kernel modesetting.
[ 21.442261] [drm] radeon kernel modesetting enabled.
[ 21.443152] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1043:0x84E3).
[ 21.443249] [drm] register mmio base: 0xFEB00000
[ 21.443253] [drm] register mmio size: 262144
[ 21.443502] ATOM BIOS: AMD
[ 21.443545] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 21.443551] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[ 21.443562] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 21.443567] [drm] Detected VRAM RAM=384M, BAR=256M
[ 21.443570] [drm] RAM width 32bits DDR
[ 21.443751] [TTM] Zone kernel: Available graphics memory: 439908 kiB.
[ 21.443757] [TTM] Zone highmem: Available graphics memory: 1359862 kiB.
[ 21.443760] [TTM] Initializing pool allocator.
[ 21.443884] [drm] radeon: 384M of VRAM memory ready
[ 21.443889] [drm] radeon: 512M of GTT memory ready.
[ 21.443909] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.443912] [drm] Driver supports precise vblank timestamp query.
[ 21.443968] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[ 21.443987] radeon 0000:00:01.0: radeon: using MSI.
[ 21.444056] [drm] radeon: irq initialized.
[ 21.444065] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 21.444957] [drm] radeon: ib pool ready.
[ 21.445160] [drm] Loading PALM Microcode
[ 21.668970] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 21.669202] radeon 0000:00:01.0: WB enabled
[ 21.669208] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffaa6c00
[ 21.689923] [drm] ring test on 0 succeeded in 1 usecs
[ 21.690167] [drm] ib test on ring 0 succeeded in 0 usecs
[ 21.690663] [drm] Radeon Display Connectors
[ 21.690667] [drm] Connector 0:
[ 21.690670] [drm] LVDS
[ 21.690673] [drm] HPD1
[ 21.690677] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 21.690681] [drm] Encoders:
[ 21.690684] [drm] LCD1: INTERNAL_UNIPHY
[ 21.690687] [drm] Connector 1:
[ 21.690689] [drm] HDMI-A
[ 21.690692] [drm] HPD2
[ 21.690695] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 21.690698] [drm] Encoders:
[ 21.690701] [drm] DFP1: INTERNAL_UNIPHY
[ 21.690704] [drm] Connector 2:
[ 21.690706] [drm] VGA
[ 21.690710] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 21.690713] [drm] Encoders:
[ 21.690715] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 21.690772] [drm] Internal thermal controller without fan control
[ 21.690841] [drm] radeon: power management initialized
[ 22.134855] [drm] fb mappable at 0xC0142000
[ 22.134861] [drm] vram apper at 0xC0000000
[ 22.134864] [drm] size 4325376
[ 22.134867] [drm] fb depth is 24
[ 22.134869] [drm] pitch is 5632
[ 22.135012] fbcon: radeondrmfb (fb0) is primary device
[ 22.671637] Console: switching to colour frame buffer device 170x48
[ 22.678908] fb0: radeondrmfb frame buffer device
[ 22.678912] drm: registered panic notifier
[ 22.678923] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:01.0 on minor 0
[ 23.444982] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 32.029601] NET: Registered protocol family 10
[ 42.021670] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 42.096609] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.403629] start_kdeinit (3674): /proc/3674/oom_adj is deprecated, please use /proc/3674/oom_score_adj instead.
[ 102.980493] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 244.892246] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[ 245.293257] usb 1-1: reset high-speed USB device number 4 using ehci_hcd
[ 245.520875] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 245.521295] Registered led device: rt2800usb-phy1::radio
[ 245.521326] Registered led device: rt2800usb-phy1::assoc
[ 245.521357] Registered led device: rt2800usb-phy1::quality
[ 245.521389] usbcore: registered new interface driver rt2800usb
[ 282.342719] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 372.790560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 373.066821] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 373.142736] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 373.418852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 376.531488] wlan0: authenticate with 00:23:f8:b5:86:43 (try 1)
[ 376.533282] wlan0: authenticated
[ 376.533358] wlan0: associate with 00:23:f8:b5:86:43 (try 1)
[ 376.537047] wlan0: RX AssocResp from 00:23:f8:b5:86:43 (capab=0x431 status=0 aid=2)
[ 376.537060] wlan0: associated
[ 376.537072] wlan0: moving STA 00:23:f8:b5:86:43 to state 1
[ 376.537080] wlan0: moving STA 00:23:f8:b5:86:43 to state 2
[ 376.537087] wlan0: moving STA 00:23:f8:b5:86:43 to state 3
[ 376.545911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 387.426200] wlan0: no IPv6 routers present
[ 503.457170] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 503.457473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 508.584014] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[ 514.066195] eth0: no IPv6 routers present
[ 1375.890671] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 1381.008023] ------------[ cut here ]------------
[ 1381.008040] WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xca/0x11d()
[ 1381.008044] Hardware name: 1215B
[ 1381.008048] NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
[ 1381.008051] Modules linked in: cryptomgr aead arc4 crypto_algapi rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib ssb mmc_core rng_core ipv6 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss radeon snd_hda_codec_realtek snd_hda_codec_hdmi brcmsmac eeepc_wmi ttm mac80211 uvcvideo snd_hda_intel brcmutil drm_kms_helper asus_wmi snd_hda_codec videobuf2_core drm cfg80211 snd_hwdep sparse_keymap videodev crc8 btusb agpgart snd_pcm snd_timer pci_hotplug psmouse snd media bluetooth cordic processor thermal battery video ac i2c_piix4 i2c_algo_bit soundcore wmi power_supply serio_raw button thermal_sys videobuf2_vmalloc k10temp bcma crypto snd_page_alloc videobuf2_memops i2c_core mousedev evdev hwmon atl1c rfkill sg [last unloaded: b43]
[ 1381.008148] Pid: 3527, comm: X Not tainted 3.3.2-wifislax #1
[ 1381.008151] Call Trace:
[ 1381.008161] [<c10202bb>] ? warn_slowpath_common+0x7c/0x8f
[ 1381.008167] [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008172] [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008178] [<c1020357>] ? warn_slowpath_fmt+0x33/0x37
[ 1381.008183] [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008192] [<c1303329>] ? netif_tx_unlock+0x3c/0x3c
[ 1381.008198] [<c1027ffa>] ? run_timer_softirq+0x125/0x1b2
[ 1381.008203] [<c102436c>] ? __do_softirq+0x71/0x108
[ 1381.008209] [<c10242fb>] ? local_bh_enable+0x2/0x2
[ 1381.008212] <IRQ> [<c10245d0>] ? irq_exit+0x3d/0x95
[ 1381.008222] [<c101560d>] ? smp_apic_timer_interrupt+0x61/0x6e
[ 1381.008228] [<c135a521>] ? apic_timer_interrupt+0x31/0x40
[ 1381.008232] ---[ end trace 87192a2e1927dafa ]---
[ 1381.066044] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1381.066877] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 1402.282389] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[ 1774.119122] Broadcom 43xx driver loaded [ Features: PMNLS ]
wifislax ~ #[/spoiler]
-
brcmsmac
[spoiler]wifislax ~ # dmesg
em 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.148286] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.148404] system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.148521] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.148604] pnp 00:03: [irq 12]
[ 0.148698] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.148750] pnp 00:04: [io 0x0060]
[ 0.148755] pnp 00:04: [io 0x0064]
[ 0.148772] pnp 00:04: [irq 1]
[ 0.148867] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.148900] pnp 00:05: [dma 4]
[ 0.148904] pnp 00:05: [io 0x0000-0x000f]
[ 0.148908] pnp 00:05: [io 0x0081-0x0083]
[ 0.148912] pnp 00:05: [io 0x0087]
[ 0.148915] pnp 00:05: [io 0x0089-0x008b]
[ 0.148918] pnp 00:05: [io 0x008f]
[ 0.148922] pnp 00:05: [io 0x00c0-0x00df]
[ 0.149016] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.149035] pnp 00:06: [io 0x0070-0x0071]
[ 0.149045] pnp 00:06: [irq 8]
[ 0.149153] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.149197] pnp 00:07: [io 0x0061]
[ 0.149390] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.149664] pnp 00:08: [io 0x0010-0x001f]
[ 0.149668] pnp 00:08: [io 0x0022-0x003f]
[ 0.149672] pnp 00:08: [io 0x0062-0x0063]
[ 0.149675] pnp 00:08: [io 0x0065-0x006f]
[ 0.149679] pnp 00:08: [io 0x0072-0x007f]
[ 0.149682] pnp 00:08: [io 0x0080]
[ 0.149686] pnp 00:08: [io 0x0084-0x0086]
[ 0.149689] pnp 00:08: [io 0x0088]
[ 0.149692] pnp 00:08: [io 0x008c-0x008e]
[ 0.149696] pnp 00:08: [io 0x0090-0x009f]
[ 0.149699] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.149703] pnp 00:08: [io 0x00b1]
[ 0.149706] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.149709] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.149713] pnp 00:08: [io 0x040b]
[ 0.149716] pnp 00:08: [io 0x04d6]
[ 0.149719] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.149722] pnp 00:08: [io 0x0c14]
[ 0.149726] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.149729] pnp 00:08: [io 0x0c52]
[ 0.149732] pnp 00:08: [io 0x0c6c]
[ 0.149735] pnp 00:08: [io 0x0c6f]
[ 0.149739] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.149742] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.149746] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.149749] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.149752] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.149756] pnp 00:08: [io 0x0b00-0x0b3f]
[ 0.149759] pnp 00:08: [io 0x0800-0x089f]
[ 0.149763] pnp 00:08: [io 0x0000-0xffffffff disabled]
[ 0.149767] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.149770] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.149773] pnp 00:08: [io 0x0900-0x090f]
[ 0.149777] pnp 00:08: [io 0x0910-0x091f]
[ 0.149780] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.149784] pnp 00:08: [io 0x0060-0x005f disabled]
[ 0.149788] pnp 00:08: [io 0x0064-0x0063 disabled]
[ 0.149792] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[ 0.149796] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.149799] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.149803] pnp 00:08: [mem 0xfed40000-0xfed44fff]
[ 0.149807] pnp 00:08: [mem 0xfed80000-0xfed80fff]
[ 0.149810] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[ 0.150037] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.150162] system 00:08: [io 0x040b] has been reserved
[ 0.150276] system 00:08: [io 0x04d6] has been reserved
[ 0.150392] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.150506] system 00:08: [io 0x0c14] has been reserved
[ 0.150621] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.150732] system 00:08: [io 0x0c52] has been reserved
[ 0.150846] system 00:08: [io 0x0c6c] has been reserved
[ 0.150958] system 00:08: [io 0x0c6f] has been reserved
[ 0.151098] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.151212] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.151325] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.151438] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.151551] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.151664] system 00:08: [io 0x0b00-0x0b3f] could not be reserved
[ 0.151778] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.151892] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.152018] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.152132] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.152244] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.152360] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.152476] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.152592] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.152706] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.152821] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.152938] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.152957] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.152975] pnp 00:09: [irq 13]
[ 0.153096] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.153289] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.153573] pnp 00:0b: [mem 0xa8000000-0xbfffffff]
[ 0.153782] system 00:0b: [mem 0xa8000000-0xbfffffff] has been reserved
[ 0.153901] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.154159] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.154358] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.154385] pnp: PnP ACPI: found 13 devices
[ 0.154504] ACPI: ACPI bus type pnp unregistered
[ 0.154616] PnPBIOS: Disabled by ACPI PNP
[ 0.197500] PCI: max bus depth: 1 pci_try_num: 2
[ 0.197557] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.197694] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.197826] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.197951] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.198127] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.198259] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.198396] pci 0000:00:15.0: PCI bridge to [bus 04-06]
[ 0.198519] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.198638] pci 0000:00:15.0: bridge window [mem 0xfde00000-0xfe7fffff]
[ 0.198758] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.198950] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[ 0.199077] pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.199263] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.199267] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.199272] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.199276] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.199282] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.199286] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.199290] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.199295] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.199299] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.199303] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.199307] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.199312] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.199316] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfe7fffff]
[ 0.199321] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.199325] pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.199374] NET: Registered protocol family 2
[ 0.199594] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.199858] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.200747] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.201235] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.201403] TCP reno registered
[ 0.201515] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201640] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201859] NET: Registered protocol family 1
[ 0.202064] pci 0000:00:01.0: Boot video device
[ 0.892488] PCI: CLS 64 bytes, default 64
[ 0.892575] Trying to unpack rootfs image as initramfs...
[ 0.894085] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.896531] Freeing initrd memory: 1852k freed
[ 0.898586] perf: AMD IBS detected (0x000000ff)
[ 0.900158] highmem bounce pool size: 64 pages
[ 0.907621] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.908264] fuse init (API version 7.18)
[ 0.908703] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.909992] aufs 3.3-20120402
[ 0.910185] msgmni has been set to 1717
[ 0.910614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.910866] io scheduler noop registered
[ 0.910997] io scheduler cfq registered (default)
[ 0.912491] isapnp: Scanning for PnP cards...
[ 1.306801] isapnp: No Plug & Play device found
[ 1.358900] brd: module loaded
[ 1.439449] loop: module loaded
[ 1.440528] ahci 0000:00:11.0: version 3.0
[ 1.440671] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.440933] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.441932] scsi0 : ahci
[ 1.442526] ata1: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
[ 1.449148] scsi1 : pata_legacy
[ 1.449470] ata2: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 1.900352] Refined TSC clocksource calibration: 1646.493 MHz.
[ 1.900490] Switching to clocksource tsc
[ 1.902294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.217394] ata1.00: ATA-8: ST9500325AS, 0003SDM1, max UDMA/133
[ 2.217575] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.220449] ata1.00: configured for UDMA/133
[ 2.220813] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0003 PQ: 0 ANSI: 5
[ 2.221761] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.222160] sd 0:0:0:0: [sda] Write Protect is off
[ 2.222334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.222368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.249891] sda: sda1 sda2 sda3 sda4
[ 2.251145] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.252497] scsi2 : pata_legacy
[ 2.252803] ata3: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 2.405457] Fusion MPT base driver 3.04.20
[ 2.405634] Copyright (c) 1999-2008 LSI Corporation
[ 2.405770] Fusion MPT SPI Host driver 3.04.20
[ 2.406073] Fusion MPT FC Host driver 3.04.20
[ 2.406339] Fusion MPT SAS Host driver 3.04.20
[ 2.406726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.406971] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.407133] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.407393] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.407667] QUIRK: Enable AMD PLL fix
[ 2.407684] ehci_hcd 0000:00:12.2: debug port 1
[ 2.407833] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4a000
[ 2.413063] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.413631] hub 1-0:1.0: USB hub found
[ 2.413826] hub 1-0:1.0: 5 ports detected
[ 2.414188] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.414321] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.414578] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.414864] ehci_hcd 0000:00:13.2: debug port 1
[ 2.415015] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb48000
[ 2.421054] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.421589] hub 2-0:1.0: USB hub found
[ 2.424579] hub 2-0:1.0: 5 ports detected
[ 2.424861] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.425097] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.425220] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.425494] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
[ 2.480592] hub 3-0:1.0: USB hub found
[ 2.480782] hub 3-0:1.0: 5 ports detected
[ 2.481130] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.481261] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 2.481536] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb49000
[ 2.536700] hub 4-0:1.0: USB hub found
[ 2.536889] hub 4-0:1.0: 5 ports detected
[ 2.537288] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.537753] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 2.537893] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 2.545152] xhci_hcd 0000:07:00.0: irq 18, io mem 0xfe800000
[ 2.545366] xhci_hcd 0000:07:00.0: irq 40 for MSI/MSI-X
[ 2.545378] xhci_hcd 0000:07:00.0: irq 41 for MSI/MSI-X
[ 2.545389] xhci_hcd 0000:07:00.0: irq 42 for MSI/MSI-X
[ 2.545755] xHCI xhci_add_endpoint called for root hub
[ 2.545759] xHCI xhci_check_bandwidth called for root hub
[ 2.545848] hub 5-0:1.0: USB hub found
[ 2.546036] hub 5-0:1.0: 2 ports detected
[ 2.546252] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 2.546379] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 2.550482] xHCI xhci_add_endpoint called for root hub
[ 2.550486] xHCI xhci_check_bandwidth called for root hub
[ 2.550609] hub 6-0:1.0: USB hub found
[ 2.550803] hub 6-0:1.0: 2 ports detected
[ 2.555202] Initializing USB Mass Storage driver...
[ 2.555473] usbcore: registered new interface driver usb-storage
[ 2.555645] USB Mass Storage support registered.
[ 2.555865] usbcore: registered new interface driver ums-alauda
[ 2.556218] usbcore: registered new interface driver ums-cypress
[ 2.556497] usbcore: registered new interface driver ums-datafab
[ 2.556727] usbcore: registered new interface driver ums_eneub6250
[ 2.556913] usbcore: registered new interface driver ums-freecom
[ 2.557105] usbcore: registered new interface driver ums-isd200
[ 2.557286] usbcore: registered new interface driver ums-jumpshot
[ 2.557462] usbcore: registered new interface driver ums-karma
[ 2.557632] usbcore: registered new interface driver ums-onetouch
[ 2.557811] usbcore: registered new interface driver ums-realtek
[ 2.557980] usbcore: registered new interface driver ums-sddr09
[ 2.558177] usbcore: registered new interface driver ums-sddr55
[ 2.558348] usbcore: registered new interface driver ums-usbat
[ 2.558620] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.576595] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.576787] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.577770] rtc_cmos 00:06: RTC can wake from S4
[ 2.578134] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.578300] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.578783] EISA: Probing bus 0 at eisa.0
[ 2.578960] EISA: Cannot allocate resource for mainboard
[ 2.579106] Cannot allocate resource for EISA slot 1
[ 2.579228] Cannot allocate resource for EISA slot 2
[ 2.579351] Cannot allocate resource for EISA slot 3
[ 2.579474] Cannot allocate resource for EISA slot 4
[ 2.579596] Cannot allocate resource for EISA slot 5
[ 2.579718] Cannot allocate resource for EISA slot 6
[ 2.579831] Cannot allocate resource for EISA slot 7
[ 2.579944] Cannot allocate resource for EISA slot 8
[ 2.580089] EISA: Detected 0 cards.
[ 2.580213] cpuidle: using governor ladder
[ 2.580326] cpuidle: using governor menu
[ 2.580774] usbcore: registered new interface driver usbhid
[ 2.580938] usbhid: USB HID core driver
[ 2.581411] ashmem: initialized
[ 2.581648] logger: created 256K log 'log_main'
[ 2.581849] logger: created 256K log 'log_events'
[ 2.582045] logger: created 256K log 'log_radio'
[ 2.582232] logger: created 256K log 'log_system'
[ 2.582537] fujitsu-tablet: Unknown (using defaults)
[ 2.582855] TCP cubic registered
[ 2.583040] NET: Registered protocol family 17
[ 2.583172] Using IPI No-Shortcut mode
[ 2.583541] registered taskstats version 1
[ 2.584376] rtc_cmos 00:06: setting system clock to 2012-04-14 17:11:12 UTC (1334423472)
[ 2.595077] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.606087] RAMDISK: xz image found at block 0
[ 2.993096] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[ 3.068259] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[ 3.068743] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[ 3.068929] VFS: Mounted root (ext4 filesystem) on device 1:0.
[ 3.069165] Freeing unused kernel memory: 444k freed
[ 3.069565] BFS CPU scheduler v0.420 by Con Kolivas.
[ 3.150605] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input1
[ 3.150772] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0
[ 3.377068] usb 3-5: new full-speed USB device number 3 using ohci_hcd
[ 3.639301] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 3.757484] scsi3 : usb-storage 2-2:1.0
[ 3.860137] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 4.367414] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 4.889412] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 5.652272] sd 3:0:0:0: [sdb] 31586304 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 5.653168] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.653185] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5.654184] sd 3:0:0:0: [sdb] No Caching mode page present
[ 5.654200] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 5.658272] sd 3:0:0:0: [sdb] No Caching mode page present
[ 5.658281] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 5.659922] sdb: sdb1
[ 5.664185] sd 3:0:0:0: [sdb] No Caching mode page present
[ 5.664192] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 5.664198] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 6.272886] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 16.902606] udev[2428]: starting version 165
[ 18.186658] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.186767] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 18.532471] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[ 18.560382] mousedev: PS/2 mouse device common for all mice
[ 18.934628] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 18.934652] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 18.937107] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 18.947092] bcma: Bus registered
[ 19.211718] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 19.211808] ACPI: Power Button [PWRB]
[ 19.211929] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 19.216846] ACPI: Lid Switch [LID]
[ 19.217024] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 19.217151] ACPI: Sleep Button [SLPB]
[ 19.217297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 19.217362] ACPI: Power Button [PWRF]
[ 19.362724] wmi: Mapper loaded
[ 19.495637] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMRG 1 (20120111/utaddress-251)
[ 19.495654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.562185] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 19.562330] ACPI: AC Adapter [AC0] (off-line)
[ 19.563874] ACPI: acpi_idle registered with cpuidle
[ 19.573223] thermal LNXTHERM:00: registered as thermal_zone0
[ 19.573230] ACPI: Thermal Zone [TZ00] (61 C)
[ 19.660589] Bluetooth: Core ver 2.16
[ 19.660625] NET: Registered protocol family 31
[ 19.660629] Bluetooth: HCI device and connection manager initialized
[ 19.660635] Bluetooth: HCI socket layer initialized
[ 19.660638] Bluetooth: L2CAP socket layer initialized
[ 19.660647] Bluetooth: SCO socket layer initialized
[ 19.720709] Linux media interface: v0.10
[ 19.916683] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 20.063923] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 20.063939] ACPI: Battery Slot [BAT0] (battery present)
[ 20.076286] acpi device:44: registered as cooling_device2
[ 20.076423] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 20.076511] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.091681] Linux agpgart interface v0.103
[ 20.093097] usbcore: registered new interface driver btusb
[ 20.252413] Linux video capture interface: v2.00
[ 20.388000] cfg80211: Calling CRDA to update world regulatory domain
[ 20.449272] [drm] Initialized drm 1.1.0 20060810
[ 20.671224] asus_wmi: ASUS WMI generic driver loaded
[ 20.776793] cfg80211: World regulatory domain updated:
[ 20.776802] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.776808] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (500 mBi, 2000 mBm)
[ 20.883483] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 20.959334] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[ 20.962661] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400
[ 20.977809] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input7
[ 20.977928] usbcore: registered new interface driver uvcvideo
[ 20.977933] USB Video Class driver (1.1.1)
[ 21.042858] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 21.200249] asus_wmi: Initialization: 0x0
[ 21.200301] asus_wmi: BIOS WMI version: 0.9
[ 21.200399] asus_wmi: SFUN value: 0x0
[ 21.202183] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[ 21.214330] asus_wmi: Backlight controlled by ACPI video driver
[ 21.273189] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[ 21.277349] ieee80211 phy0: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 21.277358] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[ 21.277369] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[ 21.277405] brcms_module_init: register returned 0
[ 21.336806] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 21.336979] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 21.354199] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 21.354513] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 21.442255] [drm] radeon defaulting to kernel modesetting.
[ 21.442261] [drm] radeon kernel modesetting enabled.
[ 21.443152] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1043:0x84E3).
[ 21.443249] [drm] register mmio base: 0xFEB00000
[ 21.443253] [drm] register mmio size: 262144
[ 21.443502] ATOM BIOS: AMD
[ 21.443545] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 21.443551] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[ 21.443562] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 21.443567] [drm] Detected VRAM RAM=384M, BAR=256M
[ 21.443570] [drm] RAM width 32bits DDR
[ 21.443751] [TTM] Zone kernel: Available graphics memory: 439908 kiB.
[ 21.443757] [TTM] Zone highmem: Available graphics memory: 1359862 kiB.
[ 21.443760] [TTM] Initializing pool allocator.
[ 21.443884] [drm] radeon: 384M of VRAM memory ready
[ 21.443889] [drm] radeon: 512M of GTT memory ready.
[ 21.443909] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.443912] [drm] Driver supports precise vblank timestamp query.
[ 21.443968] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[ 21.443987] radeon 0000:00:01.0: radeon: using MSI.
[ 21.444056] [drm] radeon: irq initialized.
[ 21.444065] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 21.444957] [drm] radeon: ib pool ready.
[ 21.445160] [drm] Loading PALM Microcode
[ 21.668970] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 21.669202] radeon 0000:00:01.0: WB enabled
[ 21.669208] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffaa6c00
[ 21.689923] [drm] ring test on 0 succeeded in 1 usecs
[ 21.690167] [drm] ib test on ring 0 succeeded in 0 usecs
[ 21.690663] [drm] Radeon Display Connectors
[ 21.690667] [drm] Connector 0:
[ 21.690670] [drm] LVDS
[ 21.690673] [drm] HPD1
[ 21.690677] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 21.690681] [drm] Encoders:
[ 21.690684] [drm] LCD1: INTERNAL_UNIPHY
[ 21.690687] [drm] Connector 1:
[ 21.690689] [drm] HDMI-A
[ 21.690692] [drm] HPD2
[ 21.690695] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 21.690698] [drm] Encoders:
[ 21.690701] [drm] DFP1: INTERNAL_UNIPHY
[ 21.690704] [drm] Connector 2:
[ 21.690706] [drm] VGA
[ 21.690710] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 21.690713] [drm] Encoders:
[ 21.690715] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 21.690772] [drm] Internal thermal controller without fan control
[ 21.690841] [drm] radeon: power management initialized
[ 22.134855] [drm] fb mappable at 0xC0142000
[ 22.134861] [drm] vram apper at 0xC0000000
[ 22.134864] [drm] size 4325376
[ 22.134867] [drm] fb depth is 24
[ 22.134869] [drm] pitch is 5632
[ 22.135012] fbcon: radeondrmfb (fb0) is primary device
[ 22.671637] Console: switching to colour frame buffer device 170x48
[ 22.678908] fb0: radeondrmfb frame buffer device
[ 22.678912] drm: registered panic notifier
[ 22.678923] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:01.0 on minor 0
[ 23.444982] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 32.029601] NET: Registered protocol family 10
[ 42.021670] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 42.096609] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.403629] start_kdeinit (3674): /proc/3674/oom_adj is deprecated, please use /proc/3674/oom_score_adj instead.
[ 102.980493] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 244.892246] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[ 245.293257] usb 1-1: reset high-speed USB device number 4 using ehci_hcd
[ 245.520875] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 245.521295] Registered led device: rt2800usb-phy1::radio
[ 245.521326] Registered led device: rt2800usb-phy1::assoc
[ 245.521357] Registered led device: rt2800usb-phy1::quality
[ 245.521389] usbcore: registered new interface driver rt2800usb
[ 282.342719] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 372.790560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 373.066821] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 373.142736] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 373.418852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 376.531488] wlan0: authenticate with 00:23:f8:b5:86:43 (try 1)
[ 376.533282] wlan0: authenticated
[ 376.533358] wlan0: associate with 00:23:f8:b5:86:43 (try 1)
[ 376.537047] wlan0: RX AssocResp from 00:23:f8:b5:86:43 (capab=0x431 status=0 aid=2)
[ 376.537060] wlan0: associated
[ 376.537072] wlan0: moving STA 00:23:f8:b5:86:43 to state 1
[ 376.537080] wlan0: moving STA 00:23:f8:b5:86:43 to state 2
[ 376.537087] wlan0: moving STA 00:23:f8:b5:86:43 to state 3
[ 376.545911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 387.426200] wlan0: no IPv6 routers present
[ 503.457170] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 503.457473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 508.584014] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[ 514.066195] eth0: no IPv6 routers present
[ 1375.890671] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 1381.008023] ------------[ cut here ]------------
[ 1381.008040] WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xca/0x11d()
[ 1381.008044] Hardware name: 1215B
[ 1381.008048] NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
[ 1381.008051] Modules linked in: cryptomgr aead arc4 crypto_algapi rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib ssb mmc_core rng_core ipv6 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss radeon snd_hda_codec_realtek snd_hda_codec_hdmi brcmsmac eeepc_wmi ttm mac80211 uvcvideo snd_hda_intel brcmutil drm_kms_helper asus_wmi snd_hda_codec videobuf2_core drm cfg80211 snd_hwdep sparse_keymap videodev crc8 btusb agpgart snd_pcm snd_timer pci_hotplug psmouse snd media bluetooth cordic processor thermal battery video ac i2c_piix4 i2c_algo_bit soundcore wmi power_supply serio_raw button thermal_sys videobuf2_vmalloc k10temp bcma crypto snd_page_alloc videobuf2_memops i2c_core mousedev evdev hwmon atl1c rfkill sg [last unloaded: b43]
[ 1381.008148] Pid: 3527, comm: X Not tainted 3.3.2-wifislax #1
[ 1381.008151] Call Trace:
[ 1381.008161] [<c10202bb>] ? warn_slowpath_common+0x7c/0x8f
[ 1381.008167] [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008172] [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008178] [<c1020357>] ? warn_slowpath_fmt+0x33/0x37
[ 1381.008183] [<c13033f3>] ? dev_watchdog+0xca/0x11d
[ 1381.008192] [<c1303329>] ? netif_tx_unlock+0x3c/0x3c
[ 1381.008198] [<c1027ffa>] ? run_timer_softirq+0x125/0x1b2
[ 1381.008203] [<c102436c>] ? __do_softirq+0x71/0x108
[ 1381.008209] [<c10242fb>] ? local_bh_enable+0x2/0x2
[ 1381.008212] <IRQ> [<c10245d0>] ? irq_exit+0x3d/0x95
[ 1381.008222] [<c101560d>] ? smp_apic_timer_interrupt+0x61/0x6e
[ 1381.008228] [<c135a521>] ? apic_timer_interrupt+0x31/0x40
[ 1381.008232] ---[ end trace 87192a2e1927dafa ]---
[ 1381.066044] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1381.066877] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 1402.282389] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[ 1774.119122] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 1922.741360] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[ 1922.743569] ieee80211 phy2: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 1922.743577] ieee80211 phy2: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[ 1922.743588] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[ 1922.743624] brcms_module_init: register returned 0
wifislax ~ #[/spoiler]
Reinicio y hago lo de lsmod
-
[ 1922.743569] ieee80211 phy2: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 1922.743577] ieee80211 phy2: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
-
cosa rara , por que hace na que actualice firmwares,pero dice que ese concreto no esta.
voy a buscar.
-
lsmod recien iniciado:
[spoiler]Module Size Used by
ipv6 176621 12
snd_seq_dummy 971 0
snd_seq_oss 20693 0
snd_seq_midi_event 3580 1 snd_seq_oss
snd_seq 34379 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 3617 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 25552 0
snd_mixer_oss 10257 3 snd_pcm_oss
cryptomgr 1795 0
aead 4104 1 cryptomgr
arc4 950 2
crypto_algapi 8256 3 cryptomgr,aead,arc4
rt2800usb 10173 0
rt2800lib 31521 1 rt2800usb
radeon 600443 2
snd_hda_codec_realtek 79625 1
ttm 37330 1 radeon
crc_ccitt 999 1 rt2800lib
eeepc_wmi 1720 0
snd_hda_codec_hdmi 19015 1
drm_kms_helper 18830 1 radeon
uvcvideo 51369 0
rt2x00usb 6348 1 rt2800usb
brcmsmac 443867 0
snd_hda_intel 17608 2
asus_wmi 11112 1 eeepc_wmi
rt2x00lib 24848 3 rt2800usb,rt2800lib,rt2x00usb
brcmutil 1864 1 brcmsmac
videobuf2_core 13830 1 uvcvideo
drm 140995 4 radeon,ttm,drm_kms_helper
snd_hda_codec 57917 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
sparse_keymap 1916 1 asus_wmi
videodev 58994 1 uvcvideo
mac80211 152082 4 rt2800lib,rt2x00usb,brcmsmac,rt2x00lib
crc8 700 1 brcmsmac
snd_hwdep 3963 1 snd_hda_codec
snd_pcm 42869 4 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
video 9657 0
agpgart 18017 2 ttm,drm
processor 22689 2
btusb 7933 0
pci_hotplug 17573 1 asus_wmi
media 6692 2 uvcvideo,videodev
bluetooth 108195 1 btusb
cordic 657 1 brcmsmac
snd_timer 12345 2 snd_seq,snd_pcm
cfg80211 118349 3 brcmsmac,rt2x00lib,mac80211
battery 8581 0
thermal 6291 0
ac 2337 0
k10temp 1939 0
i2c_algo_bit 3653 1 radeon
thermal_sys 9868 3 video,processor,thermal
wmi 6279 1 asus_wmi
psmouse 52466 0
videobuf2_vmalloc 1432 1 uvcvideo
atl1c 22931 0
crypto 4446 4 aead,crypto_algapi,mac80211,bluetooth
i2c_piix4 6680 0
snd 35007 12 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
bcma 14402 1 brcmsmac
button 3393 0
hwmon 889 4 radeon,asus_wmi,k10temp,thermal_sys
power_supply 5915 3 radeon,battery,ac
videobuf2_memops 1194 1 videobuf2_vmalloc
mousedev 7180 0
serio_raw 3042 0
soundcore 3537 3 snd
evdev 6234 18
i2c_core 13465 6 radeon,drm_kms_helper,drm,videodev,i2c_algo_bit,i2c_piix4
rfkill 10044 3 asus_wmi,bluetooth,cfg80211
snd_page_alloc 4763 2 snd_hda_intel,snd_pcm
sg 17200 0
wifislax ~ #[/spoiler]
-
modulo con los firmwares que busca el driver de broadcom
wifislax 4.1 beta 2 + firmwares
http://downloadwireless.net/modulos-fase-testing/wifislax-4.1/firmwares-broadcom.xzm
-
bcma 14402 1 brcmsmac
brcmutil 1864 1 brcmsmac
brcmsmac 443867 0
pero claro , como le falta el firmware... ^-^
a ver si hay suerte de una vez.
-
Recién hice lo de changes.xzm...
Ahora voy con esto.
Habría que cortar las líneas largas de los "códigos", deforman todo el ancho del hilo. Si no te son útiles las elimino...
-
Recién hice lo de changes.xzm...
Ahora voy con esto.
Habría que cortar las líneas largas de los "códigos", deforman todo el ancho del hilo. Si no te son útiles las elimino...
ok , de momento puedes borrar, ya que todo apuntaba al firmware.
es un caos el tema broadcom , por que hay implicados hasta 4 drivers ...y encima cada uno con sus firms y peculiaridades varias.
HE MODIFICADO LOS POST , AÑADIENDO EL CHEAT spoiler , PARA QUE ASI EL CODE ESTE OCULTO , Y SE ABRA SOLO SI ALGUIEN QUIERE VERLO.
-
Que sepas, USUARIONUEVO que aunque no tengamos una bradcom para probar seguimos el hilo dia a dia, y te apoyamos, no desesperes!!
Por otra parte, si hay algo que podamos hacer para hechar una mano solo pidelo!!
Supongo que te lo habrás leido entero, y no tengo ni la más remota idea de interpretar un dmesg, pero me ha llamado la atención esto:
[spoiler][ 102.980493] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 244.892246] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[ 245.293257] usb 1-1: reset high-speed USB device number 4 using ehci_hcd
[ 245.520875] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 245.521295] Registered led device: rt2800usb-phy1::radio
[ 245.521326] Registered led device: rt2800usb-phy1::assoc
[ 245.521357] Registered led device: rt2800usb-phy1::quality
[ 245.521389] usbcore: registered new interface driver rt2800usb
[ 282.342719] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 372.790560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 373.066821] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 373.142736] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 373.418852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 376.531488] wlan0: authenticate with 00:23:f8:b5:86:43 (try 1)
[ 376.533282] wlan0: authenticated
[ 376.533358] wlan0: associate with 00:23:f8:b5:86:43 (try 1)
[ 376.537047] wlan0: RX AssocResp from 00:23:f8:b5:86:43 (capab=0x431 status=0 aid=2)
[ 376.537060] wlan0: associated
[ 376.537072] wlan0: moving STA 00:23:f8:b5:86:43 to state 1
[ 376.537080] wlan0: moving STA 00:23:f8:b5:86:43 to state 2
[ 376.537087] wlan0: moving STA 00:23:f8:b5:86:43 to state 3
[ 376.545911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 387.426200] wlan0: no IPv6 routers present
[ 503.457170] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 503.457473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 508.584014] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[ 514.066195] eth0: no IPv6 routers present[/spoiler]
Por que cuando intenta cargar la broadcom coge wlan0 en lugar the eth1??
-
Que sepas, USUARIONUEVO que aunque no tengamos una bradcom para probar seguimos el hilo dia a dia, y te apoyamos, no desesperes!!
Por otra parte, si hay algo que podamos hacer para hechar una mano solo pidelo!!
Supongo que te lo habrás leido entero, y no tengo ni la más remota idea de interpretar un dmesg, pero me ha llamado la atención esto:
[spoiler][ 102.980493] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 244.892246] usb 1-1: new high-speed USB device number 4 using ehci_hcd
[ 245.293257] usb 1-1: reset high-speed USB device number 4 using ehci_hcd
[ 245.520875] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 245.521295] Registered led device: rt2800usb-phy1::radio
[ 245.521326] Registered led device: rt2800usb-phy1::assoc
[ 245.521357] Registered led device: rt2800usb-phy1::quality
[ 245.521389] usbcore: registered new interface driver rt2800usb
[ 282.342719] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 372.790560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 373.066821] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 373.142736] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 373.418852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 376.531488] wlan0: authenticate with 00:23:f8:b5:86:43 (try 1)
[ 376.533282] wlan0: authenticated
[ 376.533358] wlan0: associate with 00:23:f8:b5:86:43 (try 1)
[ 376.537047] wlan0: RX AssocResp from 00:23:f8:b5:86:43 (capab=0x431 status=0 aid=2)
[ 376.537060] wlan0: associated
[ 376.537072] wlan0: moving STA 00:23:f8:b5:86:43 to state 1
[ 376.537080] wlan0: moving STA 00:23:f8:b5:86:43 to state 2
[ 376.537087] wlan0: moving STA 00:23:f8:b5:86:43 to state 3
[ 376.545911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 387.426200] wlan0: no IPv6 routers present
[ 503.457170] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 503.457473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 508.584014] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Down
[ 514.066195] eth0: no IPv6 routers present[/spoiler]
Por que cuando intenta cargar la broadcom coge wlan0 en lugar the eth1??
pueden ser 2 cosas....
1- que tubiera puesta la usb
2-la mas probable ....el driver NO OFICIAL , si las monta como wlanX , permite monitor, inyeccion etc etc etc
el driver oficial las monta como ethx .
-
SIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII!!!!!!!!!!!!!!!!!!!!!!!!!!!!
OLE,OLE OLE!!!!!!!! >:( >:( >:( >:( >:( >:( >:( >:( >:( >:(
La reconoce a la primera como Wlan1 (la 0 es la Alfa)
Se deja cambiar la MAC sin errores.
Se pone en modo monitor y escanea.
Conecta y navega...
GRANDE USUARIONUEVO!!!!!!!!!!!!! >:( >:( >:( >:( >:( >:( >:(
-
miralo aqui
[ 245.521295] Registered led device: rt2800usb-phy1::radio
[ 245.521326] Registered led device: rt2800usb-phy1::assoc
[ 245.521357] Registered led device: rt2800usb-phy1::quality
esta la usb conectada .
-
SIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII!!!!!!!!!!!!!!!!!!!!!!!!!!!!
OLE,OLE OLE!!!!!!!! >:( >:( >:( >:( >:( >:( >:( >:( >:( >:(
La reconoce a la primera como Wlan1 (la 0 es la Alfa)
Se deja cambiar la MAC sin errores.
Se pone en modo monitor y escanea.
Conecta y navega...
GRANDE USUARIONUEVO!!!!!!!!!!!!! >:( >:( >:( >:( >:( >:( >:(
casi que me pongo a llorar y todo ........ POR FIN.
EL PLAN B , ERA COMPRARME UNA PUTX TARJETA CON BROADCOM. >:D >:D >:D
YA PUEDO IRME A LA TUMBA AGUSTO :=)
-
YA PUEDO IRME A LA TUMBA AGUSTO :=)
Mas que a la tumba, a por unas birras... ;D ;D ;D ;D
Muchas gracias por el esfuerzo en hacerla funcionar!!
Saludos
-
Entonces se ha conseguido?? De verdad?? Ya hay que dejar de decir "Una broadcom... pss... comprate otra"???
Muchas felicidades, gracias por el gran curro que habeis hecho, los dos!!!
Para cuando liberamos siguiente versión no beta?? Que hay un montón de cosas nuevas, la 1.0 de Supremo, los scripts de actualización, soporte para broadcom, ext4... Si es que no parais, y tu menos!!
PD.: No he querido decirlo para no desanimar a nadie, pero el hilo que comenté de un usuario que tenía una broadcom y parecía que se la detectaba como eth0... en realidad estaba usando una máquina virtual y por eso parecía que la detectaba.
-
Usuarionuevo, te envié un MP con el link al changes.xzm
Cualquier problema dame un toque.
Salu2
-
Te envié un MP con el link al changes.xzm
Cualquier problema dame un toque.
Salu2
ok , abrire un hilo para ese tema del sound server.Entonces se ha conseguido?? De verdad?? Ya hay que dejar de decir "Una broadcom... pss... comprate otra"???
Muchas felicidades, gracias por el gran curro que habeis hecho, los dos!!!
Para cuando liberamos siguiente versión no beta?? Que hay un montón de cosas nuevas, la 1.0 de Supremo, los scripts de actualización, soporte para broadcom, ext4... Si es que no parais, y tu menos!!
PD.: No he querido decirlo para no desanimar a nadie, pero el hilo que comenté de un usuario que tenía una broadcom y parecía que se la detectaba como eth0... en realidad estaba usando una máquina virtual y por eso parecía que la detectaba.
a sido el user , el que puso interes, si nadie prueba , hubiera dejado el tema.
la verdad que estoy muy muy contento , esto ,esta pendiente de hace mucho tiempo.
a ver si alguno mas con broadcom prueba.
-
en cuanto acabe otras cosillas ,,lanzaremos la 4.1
me quedan pendientes algunas cosas.
1-opcion de arranque que inicie todo wifislax en ingles
2-crear una categoria especifica de actualizadores ..para los scripts
3-crear actualizador de drivers compat-wireless
los scripts actualizadores seran
1-firefox español ...bajara el ultimo firefox en español , lo instalara a sistema y nos hara el xzm
2-lo mismo que el 1, pero preguntara en que idioma queremos firefox
3-aicrack-ng auto-updater instala a sistema y crea xzm
4-compat-wireless auto updater instala a sistema y crea xzm
el 4 , es dificil...
-
Hola
Por fin joder. buen trabajo
Usuarionuevo pasame un resumen de los que has hecho para enfocar la news para el feed
Saludos
si sale este mensaje, es que estoy en el movil
-
Hola
Por fin joder. buen trabajo
Usuarionuevo pasame un resumen de los que has hecho para enfocar la news para el feed
Saludos
si sale este mensaje, es que estoy en el movil
en las opciones de kernel
desmarcar driver bcma
y marcar el brcmsmac
ademas añadirle los firmwares brcm del git de kernel org.
y des-blacklistear el driver brcmsmac en la ruta /etc/modprobe.d/blacklist.conf
ahora asi leido parece facil ¿ verdad ?
comentar que esto es valido por lo visto en kerneles 3.2 en adelante.
-
Felicidades tio, desde luego cuando te propones algo lo consigues, yo no tengo una broadcom pero llevo siguiendo este proyecto desde que lo empezaste. Me alegro de que lo hayas conseguido. >:(
-
Hola.
Buen trabajo.
No paras tio tienes que cuidarte.
Bueno aqui unas fotillos funcionando.
Si necesitas alguna mas me dices algo.
Siento no haber podido aportar nada antes
pero mi tiempo libre
ahora mismo es bastante limitado.
Aqui la reconoce como wlan0
(http://img525.imageshack.us/img525/9066/instantanea.png) (http://imageshack.us/photo/my-images/525/instantanea.png/)
Aqui con wifite2
(http://img856.imageshack.us/img856/9153/wifite2.png) (http://imageshack.us/photo/my-images/856/wifite2.png/)
Atacando con FeedingBottle
(http://img688.imageshack.us/img688/4783/capturauua.png) (http://imageshack.us/photo/my-images/688/capturauua.png/)
La key
(http://img543.imageshack.us/img543/6711/keyoj.png) (http://imageshack.us/photo/my-images/543/keyoj.png/)
Observaciones:
Fijaos como inyecta llega hasta picos de mas de 1.000 ivs/s,
pero se mantiene estable a unos 600 ivs/s
Con wifite2, multiatack y airoscrip oficial ningun problema tampoco.
Cuidado pues la montan en mon0 y si no os fiajis os dara error al elegir wlan0
No podia esperar en compartir las imagenes de tu exito, que siempre llego tarde.
Un Saludo.
-
estaba mirando precisamente eso..pedazo inyeccion que meten ¿no?
-
Hola.
;D ;D ;D
Voy a editar las fotos que casi no se ve, para que quede claro.
Un Saludo.
-
no se si funcionaban en bactrack , que imagino que si,..pero no lo se seguro.
-
Hola
Ok es que estoy preparando las news y como no tengo broadcom. Cuanto mas me digais mejor.
Saludos
si sale este mensaje, es que estoy en el movil
-
Hola.
Probado con Broadcom 43225.
Lo unico malo es que no se me enciende la lucecita del wifi ;) ;)
Bactrack tendria que mirar si me queda alguna iso por ahi.
Si te interesa USUARIONUEVO dime y veo que se puede hacer.
Hola
Con tupeemiso juanvi me las quedo.
No te entiento pero vale ;D y si quieres mas solo tienes que pedir peemiso ^-^
Fuera coñas si quereis alguna en especial ya sabeis donde encontrarme y por supuesto
hacer lo que mejor creais con ellas, el merito ya sabemos de sobra de quien es.
Un Saludo.
Pd Hoy es un gran dia.
-
Hola
No estaria mal que hiciese alguna captura
Con comandos en consola, por ser un poco mas ortodosos jejej.
Digo que me las quedo , las fotos, para las noticias
Saludos
si sale este mensaje, es que estoy en el movil
-
mi referencia a bactrack , es mas bien ,,por que me extrañaria que en backtrack no funcionasen,...
aunuque las referencias varias que lei ,,decian... ya he probado wifiway, wifislax y backtrack ,,, sin exito.
entonces ya no se si van o no en backtrack...yo tampoco tengo una para probar,
-
Hola.
Pues una de consola.
Entiendo que quieres que lo ponga todo por comandos.
En un ratito listas.
Un Saludo.
-
mi referencia a bactrack , es mas bien ,,por que me extrañaria que en backtrack no funcionasen,...
aunuque las referencias varias que lei ,,decian... ya he probado wifiway, wifislax y backtrack ,,, sin exito.
,
Hola
Por eso lo decia yo tambien vi esos comentarios .
¿y ahora que ........ya no te quedan chip para bichear te vas a aburrir jejej?
saludos en cuanto esten las capturas de juanvi la preparo y la subo.
Saludos
Pd esto y lo de las nuevas atheros marca la diferencia sin lugar a dudas estas poniendo las distribuciones de la casa en la punta del dessarrollo .
Gracias de nuevo......y por supuesto al los beta tester que si no este hombre se nos arruina comprando cacharros jejej
si sale este mensaje, es que estoy en el movil
-
modulo con los firmwares que busca el driver de broadcom
wifislax 4.1 beta 2 + firmwares
http://downloadwireless.net/modulos-fase-testing/wifislax-4.1/firmwares-broadcom.xzm
hola
me he perdido, exactamente cual es el que ha funcionado...............¿el que pongo en la cita que es el ultimo que veo?
habeis hecho tantas pruebas que me pierdo..
luego limpio esto que parece un chat
saludos
-
Hola.
Ya las editas para que se vean mejor pero me hace ilusion que se
vea CLARAMENTE que es con WIFISLAX.
aireplay 1
(http://img842.imageshack.us/img842/6048/aireplay1.png)
aireplay 3
(http://img341.imageshack.us/img341/7812/ayreplay3s.png)
inyeccion
(http://img215.imageshack.us/img215/8559/inyeccion.png)
aircrack-ng
(http://img560.imageshack.us/img560/7366/aircrack.png)
Fijaos en la inyeccion ^-^ ^-^
Si me dejo algo dime hoy estoy libre y mañana.
Un Saludo.
-
Hola.
El tiempo de ejecucion son unos 2 minutos, tarde algo mas
por problemas de memoria.. No recordaba algunos comandos.
Malditos (y bendecidos scripts). 8)
Un Saludo.
-
Enhorabuena , las bradcom son siempre jodidas ,
juma pasame las capturas originales para editarlas si quieres , por mp
-
Hola.
Ok.
Un Saludo.
Pd en WIFIWAY tambien funciona. >:( >:(
-
Hola.
Ok.
Un Saludo.
Pd en WIFIWAY tambien funciona. >:( >:(
¡¡¡ NO jodas !!!! ¡¡¡ TAMBIEN EN WIFIWAY !!!!
jajajajajajajja ;D
-
Hola.
La culpa es solo tuya. >:D >:D
Un Saludo.
-
jumavi , las fotos se ven un poco ...medio.
si las subes a imageshack .. fijate que hay una opcion por defecto que pone redimensionar a 800x600 , eso te esta rompiendo las dimensiones de las imagenes.
-
Hola.
Hoy no puedo mas con las fotos, se las mande a orion y si quieres
te las envio a ti. :'(
Mañana me las miro.
Por cierto no tienes nada que decir de las 926ivs/s?? ;D
Solo lo he conseguido con comandos, con airoscript o similares
no pasa de los 270 de media.
Un Saludo.
-
Hola.
Hoy no puedo mas con las fotos, se las mande a orion y si quieres
te las envio a ti. :'(
Mañana me las miro.
Por cierto no tienes nada que decir de las 926ivs/s?? ;D
Solo lo he conseguido con comandos, con airoscript o similares
no pasa de los 270 de media.
Un Saludo.
AIROSCRIPT por defecto se configura a 350 datas segundo...
vete a opciones avanzadas
opcion 6 ,,cambiar pps ( paquetes por segundo )
metele 1024 .... :=)
o 800
-
AIROSCRIPT por defecto se configura a 350 datas segundo...
vete a opciones avanzadas
opcion 6 ,,cambiar pps ( paquetes por segundo )
metele 1024 .... :=)
o 800
Esa no la sabía
Siempre se aprende algo nuevo...
Gracias
-
Hola
Cuidado con subir mucho el rate de inyeccion, ami hay veces que si lo subo mucho me inyecta menos, no se por que, pero cuando lo paso de ciertas cantidades va peor.
Lo ideal es encontrar un equilibrio entre velocidad y estabilidad
Saludos
si sale este mensaje, es que estoy en el movil
-
Hola
Cuidado con subir mucho el rate de inyeccion, ami hay veces que si lo subo mucho me inyecta menos, no se por que, pero cuando lo paso de ciertas cantidades va peor.
Lo ideal es encontrar un equilibrio entre velocidad y estabilidad
Saludos
si sale este mensaje, es que estoy en el movil
en las atheros pasa , pero viendo los rates de 900 de jumavi , pues parece que las broad no les pasa...
ya veras ahora en vez de buscar portatiles con atheros vamos a buscar broadcoms..jajajaj
-
Buenas:
¿Que broadcom teneis?
¿Con Ubuntu o cualquier otra distribución necesitais el fsam7740 para que os la reconozca (lo típico de que hay que presionar un botón del portatil para que se encienda?
A mi por ahora con la ipw2200 no me ha dejado jugar
Un saludo
ChimoC
-
Buenas:
¿Que broadcom teneis?
¿Con Ubuntu o cualquier otra distribución necesitais el fsam7740 para que os la reconozca (lo típico de que hay que presionar un botón del portatil para que se encienda?
A mi por ahora con la ipw2200 no me ha dejado jugar
Un saludo
ChimoC
voy a mirartelo ...pero conste , es algo que solo os pasa a los que teneis el puñetero boton de encender el wifi, al resto les va bien.
http://fsam7440.sourceforge.net/es/down.html
-
BIEN , la version de consola a compilado. ^-^
;D ;D ;D
https://foro.seguridadwireless.net/colaboracion-y-desarrollo-de-nuestras-lives/test-portatiles-con-boton-de-encender-wifi/
-
Disculpen !tengo una gran duda ojala algien me la pueda resolver!
inicie el programa creo que me reconocio la tarjeta!. puedo escanear y me salen las redes! pero en el momento de capturar los datos de mi red donde pone data se queda estancado en 0 y no suben los ivs
que es lo que sucede?!! alguien me podria responder! un saludo :D
-
Disculpen !tengo una gran duda ojala algien me la pueda resolver!
inicie el programa creo que me reconocio la tarjeta!. puedo escanear y me salen las redes! pero en el momento de capturar los datos de mi red donde pone data se queda estancado en 0 y no suben los ivs
que es lo que sucede?!! alguien me podria responder! un saludo :D
lo que necesitas es paciencia y leer mas , no preguntes lo mismo en 80 temas diferentes.
esto no es magia ...si quieres datas rapido pon el emule en marcha.
-
Estoy probando con wifislax 4.2 final x86 y wifislax 4-2 x64, no sé si es aquí donde tengo que preguntar, pero alguien ha conseguido hacer que funcione con una Broadcom 43227?? sigo los pasos descritos en éste post, pero no hay manera :-\ vengo de utilizar una atheros ar5007eg y una orinoco gold en mi antiguo portátil sin problema, pero en los nuevos portátiles es imposible utilizar ninguna de las dos :(
Una vez generado mi usb live, copio firmwares-broadcom.xzm en la carpeta base (que no sé si es necesario en la 4.2?!) y por terminal monto brcmsmac, pero nada.
Poniendo en terminal lspci la reconoce:
02:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10)
02:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10)
03:00.0 Network controller: Broadcom Corporation BCM43227 802.11b/g/n
Me pierdo un poco en lo de modificar el kernel y el blacklist :-[ se agradecería un tutorial para broadcom jejeje
en las opciones de kernel
desmarcar driver bcma
y marcar el brcmsmac
ademas añadirle los firmwares brcm del git de kernel org.
y des-blacklistear el driver brcmsmac en la ruta /etc/modprobe.d/blacklist.conf
ahora asi leido parece facil ¿ verdad ?
comentar que esto es valido por lo visto en kerneles 3.2 en adelante.
A ver si alguien me puede ayudar, gracias de antemano, un saludo.
-
Estoy probando con wifislax 4.2 final x86 y wifislax 4-2 x64, no sé si es aquí donde tengo que preguntar, pero alguien ha conseguido hacer que funcione con una Broadcom 43227?? sigo los pasos descritos en éste post, pero no hay manera :-\ vengo de utilizar una atheros ar5007eg y una orinoco gold en mi antiguo portátil sin problema, pero en los nuevos portátiles es imposible utilizar ninguna de las dos :(
Una vez generado mi usb live, copio firmwares-broadcom.xzm en la carpeta base (que no sé si es necesario en la 4.2?!) y por terminal monto brcmsmac, pero nada.
Poniendo en terminal lspci la reconoce:
02:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10)
02:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10)
03:00.0 Network controller: Broadcom Corporation BCM43227 802.11b/g/n
Me pierdo un poco en lo de modificar el kernel y el blacklist :-[ se agradecería un tutorial para broadcom jejeje
en las opciones de kernel
desmarcar driver bcma
y marcar el brcmsmac
ademas añadirle los firmwares brcm del git de kernel org.
y des-blacklistear el driver brcmsmac en la ruta /etc/modprobe.d/blacklist.conf
ahora asi leido parece facil ¿ verdad ?
comentar que esto es valido por lo visto en kerneles 3.2 en adelante.
A ver si alguien me puede ayudar, gracias de antemano, un saludo.
el kernel ya esta listo , pero puede que sea otra cosa.
abre un terminal
y escribe
lsmod
si ves que esta
wl.ko
haz
rmmod wl
y despues intenta
modprobe b43
y mira entonces si al hacer iwconfig te aparece una nueva interfaz.
-
Gracias por contestar tan rápido USUARIONUEVO! :)
Lo he probado en x86 y x64, pero no aparece una nueva interfaz :-\
He seguido los pasos, haciendo lsmod en terminal no aparece wl.ko
wifislax ~ # lsmod
Module Size Used by
ipv6 214117 24
snd_seq_oss 24471 0
snd_seq_midi_event 4556 1 snd_seq_oss
snd_seq 42283 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 4425 2 snd_seq_oss,snd_seq
snd_pcm_oss 30307 0
snd_mixer_oss 12424 1 snd_pcm_oss
snd_hda_codec_hdmi 21316 1
snd_hda_codec_realtek 50304 1
i915 345911 2
drm_kms_helper 21308 1 i915
drm 175412 3 i915,drm_kms_helper
uvcvideo 59778 0
videobuf2_core 15410 1 uvcvideo
videodev 76195 1 uvcvideo
acer_wmi 20297 0
media 8557 2 uvcvideo,videodev
i2c_algo_bit 4497 1 i915
sparse_keymap 2403 1 acer_wmi
coretemp 5365 0
snd_hda_intel 21312 1
snd_hda_codec 69743 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
videobuf2_vmalloc 1996 1 uvcvideo
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 56520 4 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
crc32c_intel 1651 0
ghash_clmulni_intel 3357 0
aesni_intel 41300 0
acpi_cpufreq 5055 1
mperf 1027 1 acpi_cpufreq
cryptd 7080 2 ghash_clmulni_intel,aesni_intel
crypto_hash 10680 3 crc32c_intel,ghash_clmulni_intel,cryptd
rfkill 12999 1 acer_wmi
tg3 122470 0
intel_agp 10190 1 i915
processor 26793 1 acpi_cpufreq
crypto_wq 743 1 cryptd
mxm_wmi 1249 0
videobuf2_memops 1686 1 videobuf2_vmalloc
video 11073 2 i915,acer_wmi
snd_timer 16078 2 snd_seq,snd_pcm
i2c_i801 7449 0
crypto_blkcipher 11367 2 aesni_intel,cryptd
battery 6085 0
intel_gtt 12447 3 i915,intel_agp
libphy 13942 1 tg3
ac 2152 0
button 4269 1 i915
aes_x86_64 7316 1 aesni_intel
thermal_sys 12405 2 processor,video
sg 21854 0
wmi 7442 2 acer_wmi,mxm_wmi
power_supply 8208 2 battery,ac
snd 47739 14 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
psmouse 62358 0
i2c_core 16457 6 i915,drm_kms_helper,drm,videodev,i2c_algo_bit,i2c_i801
mousedev 9038 0
cryptomgr 2257 0
agpgart 23510 3 drm,intel_agp,intel_gtt
soundcore 4457 1 snd
aead 4972 3 aesni_intel,cryptd,cryptomgr
aes_generic 25786 2 aesni_intel,aes_x86_64
snd_page_alloc 6037 2 snd_hda_intel,snd_pcm
evdev 8556 26
serio_raw 3902 0
hwmon 1193 2 coretemp,thermal_sys
crypto_algapi 10624 8 aesni_intel,cryptd,crypto_hash,crypto_blkcipher,aes_x86_64,cryptomgr,aead,aes_generic
crypto 5658 6 aesni_intel,cryptd,crypto_hash,crypto_blkcipher,aead,crypto_algapi
De todas formas, he desmontado wl por si acaso y dice que no existe.
wifislax ~ # rmmod wl
ERROR: Module wl does not exist in /proc/modules
Y después he montado b43.
wifislax ~ # modprobe b43
wifislax ~ #
Pero nada :-X
wifislax ~ # iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
-
Gracias por contestar tan rápido USUARIONUEVO! :)
Lo he probado en x86 y x64, pero no aparece una nueva interfaz :-\
He seguido los pasos, haciendo lsmod en terminal no aparece wl.ko
wifislax ~ # lsmod
Module Size Used by
ipv6 214117 24
snd_seq_oss 24471 0
snd_seq_midi_event 4556 1 snd_seq_oss
snd_seq 42283 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 4425 2 snd_seq_oss,snd_seq
snd_pcm_oss 30307 0
snd_mixer_oss 12424 1 snd_pcm_oss
snd_hda_codec_hdmi 21316 1
snd_hda_codec_realtek 50304 1
i915 345911 2
drm_kms_helper 21308 1 i915
drm 175412 3 i915,drm_kms_helper
uvcvideo 59778 0
videobuf2_core 15410 1 uvcvideo
videodev 76195 1 uvcvideo
acer_wmi 20297 0
media 8557 2 uvcvideo,videodev
i2c_algo_bit 4497 1 i915
sparse_keymap 2403 1 acer_wmi
coretemp 5365 0
snd_hda_intel 21312 1
snd_hda_codec 69743 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
videobuf2_vmalloc 1996 1 uvcvideo
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 56520 4 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
crc32c_intel 1651 0
ghash_clmulni_intel 3357 0
aesni_intel 41300 0
acpi_cpufreq 5055 1
mperf 1027 1 acpi_cpufreq
cryptd 7080 2 ghash_clmulni_intel,aesni_intel
crypto_hash 10680 3 crc32c_intel,ghash_clmulni_intel,cryptd
rfkill 12999 1 acer_wmi
tg3 122470 0
intel_agp 10190 1 i915
processor 26793 1 acpi_cpufreq
crypto_wq 743 1 cryptd
mxm_wmi 1249 0
videobuf2_memops 1686 1 videobuf2_vmalloc
video 11073 2 i915,acer_wmi
snd_timer 16078 2 snd_seq,snd_pcm
i2c_i801 7449 0
crypto_blkcipher 11367 2 aesni_intel,cryptd
battery 6085 0
intel_gtt 12447 3 i915,intel_agp
libphy 13942 1 tg3
ac 2152 0
button 4269 1 i915
aes_x86_64 7316 1 aesni_intel
thermal_sys 12405 2 processor,video
sg 21854 0
wmi 7442 2 acer_wmi,mxm_wmi
power_supply 8208 2 battery,ac
snd 47739 14 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
psmouse 62358 0
i2c_core 16457 6 i915,drm_kms_helper,drm,videodev,i2c_algo_bit,i2c_i801
mousedev 9038 0
cryptomgr 2257 0
agpgart 23510 3 drm,intel_agp,intel_gtt
soundcore 4457 1 snd
aead 4972 3 aesni_intel,cryptd,cryptomgr
aes_generic 25786 2 aesni_intel,aes_x86_64
snd_page_alloc 6037 2 snd_hda_intel,snd_pcm
evdev 8556 26
serio_raw 3902 0
hwmon 1193 2 coretemp,thermal_sys
crypto_algapi 10624 8 aesni_intel,cryptd,crypto_hash,crypto_blkcipher,aes_x86_64,cryptomgr,aead,aes_generic
crypto 5658 6 aesni_intel,cryptd,crypto_hash,crypto_blkcipher,aead,crypto_algapi
De todas formas, he desmontado wl por si acaso y dice que no existe.
wifislax ~ # rmmod wl
ERROR: Module wl does not exist in /proc/modules
Y después he montado b43.
wifislax ~ # modprobe b43
wifislax ~ #
Pero nada :-X
wifislax ~ # iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
Antes de nada saludos a todos, este es mi primer mensaje.
Yo estoy igual que tu, ¿Conseguistes finalmente hacerla funcionar?
Yo tengo Wifislax X64 y mi tarjeta es una Broadcom BCM4331 y tampoco me funciona, he seguido los pasos del hilo y nada.
A mi tampoco me aparece wl.xo
-
Buenas noches a Todos
Quiero pedir una ayuda solamente quiero preguntar x que no me reconoce la tarjeta si ya descargue la version de wifilax con tarjeta broadcom ago todos los paso lo unico que no se si estare asiendo algo mal les comento que Monto en Virtual Box V 4.2.2 ago todos los pasos que dicen en el video y no me reconoce la tarjeta broadcom. copio el fimware en la carpeta base que no se cual de todas pero en ninguno me los deja pegar me dice que no se puede. me descargue una version de wifilax que supuestamente dice en un foro que ya lo tiene incluido y no se por que sigue sin funcionar no se si es error mio lo estoy asiendo mal los pasos o que.
1- Abro virtualbox configuro en Linux 2.6 de 64bits, monto el CD del wifilax en almacenamiento, habilito el dispositivo USB y le doy iniciar.
2- Me sale corriendo perfecto todo el wifilax entro por tarjeta grafica de wifilax y corre todo bien antes no lo hacia hasta que descargue otra version que es la wifislax-4.1-beta-3 que es la que supuestamente tiene el fimware de broadcom incluido pero resulta ser que cuando entro a wifilax monitor para activar modo monitor y solo me sale la Eth0 :(.
3- Luego que hago esto me voy para ver si me reconoce los driver colocando las pruebas en la consola
wifislax ~ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifislax ~ # modprobe b43
wifislax ~ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifislax ~ # rmmod b43
wifislax ~ # modprobe brcmsmac
wifislax ~ # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifislax ~ #
y no me funciona absolutamente nada pero bueno segui intentando mas sobre los comando y aun nada que me activa la tarjeta monitor.
Pregunta.
1- Se puede hacer esto desde virtual box o es mejor hacerlo booteando mejor CD live el detalle esta es en como saber que contenido tiene el CD ya que no aparece el fimware broadcom y si no lo tiene dificilmente me funcionara como monitor la tarjeta de red.
2- Ay algun tema que indique paso por paso como hacerlo y como es mejor hacerlo por que de donde yo lo vi fue de virtualbox y lo hizo sin problema inclusive el que iso el video se ve que esta conectado a internet inalabrico y todo asi que no entiendo por que a mi no me funciona.
Mi com****dora es un Toshiba M645-SP4130L
Estas son sus especificaciones aunque ay no aparece la tarjeta de red pero les colocare la que me sale en el everest.
Especificaciones
http://www.polux.com.co/ft/TSH4130M-Satellite%20M645-SP4130L.pdf
Tarjeta de Red
(http://i45.tinypic.com/14tk61.jpg)
Espero que me puedan ayudar para poder entrar a la pass y poderme conectar denuevo por internet.
Gracias de Ante mano
Oscar507.
-
por favor que alguien cierre este tema.
otro con maquina virtual que no se entera que:
las maquinas virtuales no reconocen tarjetas integradas solo adaptadores usb
-
bloqued.
aun asi dejo una breve nota ,...aun quedan apadtadores broadcom , que no son reconocidos...solo algunos van.
Y COMO YA DICE EL COMPAÑERO , en maquina virtual na de na. , pero vamos ni broadcom ni ninguna otra interna (pci)
solo adaptadores wireless usb.